ZenFone Selfie ZD551KL Sideload Flash problem - ZenFone 2 Q&A, Help & Troubleshooting

Hello !
So a friend of mine gave me his Zenfone 2 Selfie who don't want to boot (stuck at Asus boot logo and bootloop)
I've try to reflash system with the sideload but i get this error :
Code:
E:Error in /sideload/package.zip
(Status 1)
E: fota_return_code 408
Installation aborted
I've looked at the recovery log it says after signature verification :
Code:
Device image SKU : erasing 786432 blocks
blkdiscard failed: Invalid argument
writing 8*21 blocks of new data
ww
OTA image SKU : ww
write failed: No space left on device
lseek64 failed: Invalid argument
E:Error in /sideload/package.zip
(Status 1)
E: fota_return_code 408
Installation aborted
sideload_host finished
Installation aborted
I've found on the internet boot.img recovery.img and system.img files, i've tried to flash them with fast boot but when i flash system.img this errors happen :
Code:
λ [email protected] → fastboot flash system system.img
target reported max download size of 268435456 bytes
erasing 'system'...
OKAY [ 0.057s]
sending sparse 'system' (259338 KB)...
OKAY [ 8.148s]
writing 'system'...
FAILED (remote: size too large)
finished. total time: 8.206s
I think it might need some script to partition the system memory ?
Thanks for your replies !

Is it rooted? If not, wipe data should be enough to repair the phone. But, if it's rooted, and your friend is messing with the system files, wipe data and system first, then flash the system.img, and make sure the system.img is for zenfone selfie

Hi !
Thanks for your answer !
So the device isn't rooted, i've tried to wipe data but still bootloop.
I've tried to flash boot.img recovery.img and system.img with modified imgs for rooting (i haven't found the sotck img files) but the problem still the same, the system don't want to flash system.img :
Code:
λ [email protected] → fastboot flash system system.img
target reported max download size of 268435456 bytes
erasing 'system'...
OKAY [ 0.057s]
sending sparse 'system' (259338 KB)...
OKAY [ 8.148s]
writing 'system'...
FAILED (remote: size too large)
finished. total time: 8.206s
(with fastboot erase system before falshing system)
But i found something strange, when my friend gave me his zenphone the recovery says that the SKU was WW, i've already tried with WW, but on the phone box, CN is written : "ANDROID CN/CN5, 5.5".
Should i try to flash CN boot, recovery and system ?

Anyone have another idea ?

Problem solved ! I've trie to flash CN img and everything is ok ! Now i'm searching for a way ton install gapps i don't have the option to flash zip from sdcard in recovery

Sorry, wrong model.

Goyaume said:
Problem solved ! I've trie to flash CN img and everything is ok ! Now i'm searching for a way ton install gapps i don't have the option to flash zip from sdcard in recovery
Click to expand...
Click to collapse
You will need to be rooted if you want gapps.
BTW, Gapps isn't necessary, if you flash WW firmware since CN firmware don't comes with Google apps. Neither the phone is CN or WW version is not the problem, the CN compatible with WW firmware. Here maybe this website will help you, but don't download and flash their files because it's for zenfone 2 ze55*ml so just follow the instructions, but I can't help you for the firmware file because I'm using zenfone 2 ze551ml.
Link: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=14962
P.S: By the way my ZF2 is TW version but when I do fota, the fota changes my zf2 to ww version itself, and there is no problem using my phone

Hi Goyaume
I have the same problem (buy a chinese Zenfone Selfie with LRX22G.WW_user_1.13.40.661 firmware).
Some apps doesn't run on it so I tried to update the firmware with UL-Z00T-WW-1.14.40.695-user and now is stuck on the boot looping.
Did you solved your problem with a CN firmware?

cn recovery needed
Goyaume said:
Problem solved ! I've trie to flash CN img and everything is ok ! Now i'm searching for a way ton install gapps i don't have the option to flash zip from sdcard in recovery
Click to expand...
Click to collapse
dude where did u find the cn recovery,,i need it ,,link please

Goyaume said:
Problem solved ! I've trie to flash CN img and everything is ok ! Now i'm searching for a way ton install gapps i don't have the option to flash zip from sdcard in recovery
Click to expand...
Click to collapse
Can you provide us CN recovery link and your firmware link? I got same problem as like you.

old thread but maybe someone need the solution.
youtube[dot]com/watch?v=us6qIvdK-TM
just flash "fac" firmware, then flash WW. 100% worked for me. zd551kl bootloop,because wrong firmware region.

r1cute said:
old thread but maybe someone need the solution.
youtube[dot]com/watch?v=us6qIvdK-TM
just flash "fac" firmware, then flash WW. 100% worked for me. zd551kl bootloop,because wrong firmware region.
Click to expand...
Click to collapse
Its worked, Thanks a Lot. Finally CN to WW in ZD551KL

Goyaume said:
Hello !
So a friend of mine gave me his Zenfone 2 Selfie who don't want to boot (stuck at Asus boot logo and bootloop)
I've try to reflash system with the sideload but i get this error :
Code:
E:Error in /sideload/package.zip
(Status 1)
E: fota_return_code 408
Installation aborted
I've looked at the recovery log it says after signature verification :
Code:
Device image SKU : erasing 786432 blocks
blkdiscard failed: Invalid argument
writing 8*21 blocks of new data
ww
OTA image SKU : ww
write failed: No space left on device
lseek64 failed: Invalid argument
E:Error in /sideload/package.zip
(Status 1)
E: fota_return_code 408
Installation aborted
sideload_host finished
Installation aborted
I've found on the internet boot.img recovery.img and system.img files, i've tried to flash them with fast boot but when i flash system.img this errors happen :
Code:
λ [email protected] → fastboot flash system system.img
target reported max download size of 268435456 bytes
erasing 'system'...
OKAY [ 0.057s]
sending sparse 'system' (259338 KB)...
OKAY [ 8.148s]
writing 'system'...
FAILED (remote: size too large)
finished. total time: 8.206s
I think it might need some script to partition the system memory ?
Thanks for your replies !
Click to expand...
Click to collapse
i have same problem can you give me cn recovery and boot please??

how did you solve it?
Goyaume said:
Problem solved ! I've trie to flash CN img and everything is ok ! Now i'm searching for a way ton install gapps i don't have the option to flash zip from sdcard in recovery
Click to expand...
Click to collapse
I have the exact same problem, but in 2017. where did you find the CN img files and if you don't mind can you please show me a step by step process of how you actually did?

Flash cn image file
Ayabongayb said:
I have the exact same problem, but in 2017. where did you find the CN img files and if you don't mind can you please show me a step by step process of how you actually did?
Click to expand...
Click to collapse
Old thread but I think this may help
youtube . com/ watch?v=u_CBA7LkhW4&t=1s

Related

[Q]Flash system image faild

Hi ,
i need some help regarding back to the stock procedure,
i know my cid(VODAP102) it's a VODA-Germany ,i downloaded the RUU_ENDEAVOR_U_ICS_40_Vodafone_CHDE_1.26.166.2_Radio_1.1204.90.13_release_251279_signed.exe
I think it's a right RUU,
i flashed the boot.img and stock recovery succefully but i get an error when i tried to flash system.img
" F:\back\fastboot>fastboot flash system system.img
sending 'system' (980655 KB)...
FAILED (remote: (00000006))
finished. total time: 0.028s "
Somebody, knows this kind of error??
how can i flash the system.img succefully??
Thanks
Ove never seen anybody try to flash a system.img.
Why don't you just run the ruu and let it do it's job?
ekorol1 said:
Hi ,
i need some help regarding back to the stock procedure,
i know my cid(VODAP102) it's a VODA-Germany ,i downloaded the RUU_ENDEAVOR_U_ICS_40_Vodafone_CHDE_1.26.166.2_Radio_1.1204.90.13_release_251279_signed.exe
I think it's a right RUU,
i flashed the boot.img and stock recovery succefully but i get an error when i tried to flash system.img
" F:\back\fastboot>fastboot flash system system.img
sending 'system' (980655 KB)...
FAILED (remote: (00000006))
finished. total time: 0.028s "
Somebody, knows this kind of error??
how can i flash the system.img succefully??
Thanks
Click to expand...
Click to collapse
Just double click the RUU.exe file ! Go here if you have any trouble :http://forum.xda-developers.com/showthread.php?t=1859714
Cheers~
10X,
for helping

Help: Bricked Htc one M8 GPe

Hello everyone, I started to play around with all the diff things you can do with a rooted phone had plans for getting a custom ROM for my phone. Let me stat by saying that I am very new to all this.
I day ago i was getting ready to install the custom ROM for viper (ViperOneM8_1.7.1) reason being is coming from a htc one m7 with sense i wanted to get back to sense from my stock GPe m8.
I was able to unlock my bootloader and get my phone rooted I fallowed this video (How to Root your HTC One M8 - Full Guide) From Sakitech... or least I think im rooted still... I'll come back to you as to why I say "I think I'm rooted".
I thought it would be very simple just fire up the custom recovery and flash the ROM and sit back while it flashed, well everything went down hill from this point. Let me tell you what i did.
First i got to the custom recovery and I did a wipe I did advanced wipe and checked the boxes this is where I think I deleted the OS(after this I could not get back on the phone to do anything only will boot to recovery and it say no OS installed then asks if I want to get SuperSU installed this is where I already thought I was rooted but maybe on not??? I'm very confused about that
Then I used the sideload method to push the rom zip and try to flash the rom at this point I cant get it to flash. First I was getting the MD5 error I checked that off now it will just fail either saying error executing the binary from the zip or that zip is corrupted. (I tried re-downloading the ROM even from mirror link)
At this point I am very frustrated and feel helpless. I tried my best to keep from posting this and try to research to see if i can find the solution myself but I'm having no luck I have my days off from work to get my phone up and running or ill just have to go but another phone. At this point I really need some help. All I want is a working phone if i can get back to GPe stock that would be fine or make the ViperOne work.
Attempts to solve my problem: I tried flashing GPE4.4.3_m8.zip and other stock GPe ROMs nothing works
Thanks for reading and all your help I will sit nest to my comp and answer anything to try make everything as clear as possible. Thank you again
So I tried ViperOne again and it was starting to install but then fails. I searched around and I found that i need to have s-off to be able to install the ROM.
Can I get s-off from the recovery or bootloader/fastboot?
Demonwarrior said:
So I tried ViperOne again and it was starting to install but then fails. I searched around and I found that i need to have s-off to be able to install the ROM.
Can I get s-off from the recovery or bootloader/fastboot?
Click to expand...
Click to collapse
no offense, buy you need to read before you continue anything else.
rbouza1 said:
no offense, buy you need to read before you continue anything else.
Click to expand...
Click to collapse
None taken, I appreciate the reply and I will continue to do more research. Do you have any info I could use?
Demonwarrior said:
None taken, I appreciate the reply and I will continue to do more research. Do you have any info I could use?
Click to expand...
Click to collapse
Try this :
Do a full wipe in the recovery, install viper rom but do not choose to do a full wipe in the aroma installer. Once finished you flash the boot.img via fastboot and then reboot the phone.
You do not need s-off to flash custom roms. But the GPE thingy can be the problem....
Mr Hofs said:
Try this :
Do a full wipe in the recovery, install viper rom but do not choose to do a full wipe in the aroma installer. Once finished you flash the boot.img via fastboot and then reboot the phone.
You do not need s-off to flash custom roms. But the GPE thingy can be the problem....
Click to expand...
Click to collapse
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Demonwarrior said:
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Click to expand...
Click to collapse
fastboot flash img boot.img
---------- Post added at 06:28 PM ---------- Previous post was at 06:25 PM ----------
try that command, and what model did you have originally and did you convert to gpe or flash a gpe ROM.
gave me an error
Code:
FAILED (remote: signature verify fail)
Its a stock Google play edition I bought from the Google paly store, I didnt flash any other rom the ViperOne rom was going to be the first flash on the phone
Do you have an SD reader on your laptop? You can buy a big SD that you can put a small SD card inside it, then put the ROM zip file inside the SD card, after that plug it in your M8 and flash it via twrp.
Let me know if you couldn't understand any point cuz my English is not that good.
iHagbani said:
Do you have an SD reader on your laptop? You can buy a big SD that you can put a small SD card inside it, then put the ROM zip file inside the SD card, after that plug it in your M8 and flash it via twrp.
Let me know if you couldn't understand any point cuz my English is not that good.
Click to expand...
Click to collapse
I know how to push the rom trough adb to flash it thats not the problem the problem is that i cant get it to install properly. Thanks for the reply though i appreciate it.
Demonwarrior said:
I got the boot img from the ViperOne zip and ran the rom through sideload. what command do i run to flash the boot.img?
Code:
fastboot flash boot.img
?
also the ViperOne install failed said status 7 and some synlinks failed
Click to expand...
Click to collapse
Correct command is fastboot flash boot boot.img
status 7 means you don't have right recovery for that ROM
Also search about Stock GPE partition layout, is it same as normal non-GPE. I doubt it as I seen somewhere about people do full conversion to GPE, they need to reflash firmware to correct the partition for Sense ROM. This is what I understand from this thread : http://forum.xda-developers.com/showthread.php?t=2708589
ckpv5 said:
Correct command is fastboot flash boot boot.img
status 7 means you don't have right recovery for that ROM
Also search about Stock GPE partition layout, is it same as normal non-GPE. I doubt it as I seen somewhere about people do full conversion to GPE, they need to reflash firmware to correct the partition for Sense ROM. This is what I understand from this thread : http://forum.xda-developers.com/showthread.php?t=2708589
Click to expand...
Click to collapse
I have researched about the partition layout and I think you are right. How do i get the right partition layout? this is all a learning experience for me lol. I just hope i can get my phone working again.
In thats case then i might be worse off then i though my phone is s-on an there is no way for me to get it s-off in its current bricked state... to the the Ruu to install
correct me if im wrong but then what i have to do is just flash the stock rom for gpe beacuse since my phone was already stock GPe the the frieware(partition layout) will apcct it... right?
I want to thank everyone at the this point it looks like i have a lot of learning to do. Thank you
Demonwarrior said:
I know how to push the rom trough adb to flash it thats not the problem the problem is that i cant get it to install properly. Thanks for the reply though i appreciate it.
Click to expand...
Click to collapse
I know, but I told you this way in case that the adb didn't flash the whole zip file!
Demonwarrior said:
I have researched about the partition layout and I think you are right. How do i get the right partition layout? this is all a learning experience for me lol. I just hope i can get my phone working again.
In thats case then i might be worse off then i though my phone is s-on an there is no way for me to get it s-off in its current bricked state... to the the Ruu to install
correct me if im wrong but then what i have to do is just flash the stock rom for gpe beacuse since my phone was already stock GPe the the frieware(partition layout) will apcct it... right?
I want to thank everyone at the this point it looks like i have a lot of learning to do. Thank you
Click to expand...
Click to collapse
Follow the link in the post you quoted:
http://forum.xda-developers.com/showthread.php?t=2708589
You should really read carefully before doing stuff with your phone, especially when you are unexperienced.
If you are unsure about anything, ask before you try messing with something and hope that it will work.
You didnt, and now you have the mess.
But now even now you are not able to follow the instructions people are giving you.
In the post you just quoted there are instructions how to go from GPE to Sense and also back (#1 and #2 post)
j to the 4n said:
Follow the link in the post you quoted:
http://forum.xda-developers.com/showthread.php?t=2708589
You should really read carefully before doing stuff with your phone, especially when you are unexperienced.
If you are unsure about anything, ask before you try messing with something and hope that it will work.
You didnt, and now you have the mess.
But now even now you are not able to follow the instructions people are giving you.
In the post you just quoted there are instructions how to go from GPE to Sense and also back (#1 and #2 post)
Click to expand...
Click to collapse
I tried the instruction on the thread it didnt work... I think its because i have s-on
Code:
C:\Users\owner\Desktop\htc one\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.058s]
finished. total time: 0.061s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.483s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.846s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.484s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.665s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.479s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.662s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.478s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.661s
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.458s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.641s
C:\Users\owner\Desktop\htc one\platform-tools>
C:\Users\owner\Desktop\htc one\platform-tools>fastboot flash zip RUU-HTC_One_M8_
GPE_4.4.4-2.12.1700.1_rooted.zip
target reported max download size of 1830617088 bytes
sending 'zip' (569179 KB)...
OKAY [ 19.470s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 19.650s
C:\Users\owner\Desktop\htc one\platform-tools>
The post says to try it a few times but still giving me the say error

TWRP - Failed to mount '/firmware' (invalid argument)

I rooted my Moto Z Play but I think I screwed up since I can´t no longer flash anything.
The TWRP is working fine (i guess) but when I try to install a ROM I get the following message:
"Failed to mount '/firmware' (invalid argument)"
I tried everything but can´t get it working properly.
Prior to this error I think I tried a diferent version of PAC-MAN and ended up with this situation.
Any sugestions?
Thanx in advance!
gocks said:
I rooted my Moto Z Play but I think I screwed up since I can´t no longer flash anything.
The TWRP is working fine (i guess) but when I try to install a ROM I get the following message:
"Failed to mount '/firmware' (invalid argument)"
I tried everything but can´t get it working properly.
Prior to this error I think I tried a diferent version of PAC-MAN and ended up with this situation.
Any sugestions?
Thanx in advance!
Click to expand...
Click to collapse
As far as I know no one has built PAC ROM for moto z play. My guess is TWRP just saved you from bricking your phone. Better make sure you're trying to flash a ROM build for MZP.
dandrumheller said:
As far as I know no one has built PAC ROM for moto z play. My guess is TWRP just saved you from bricking your phone. Better make sure you're trying to flash a ROM build for MZP.
Click to expand...
Click to collapse
C´mon guys, give me a break, I´m not a tech savy or something like that, just a regular lawyer.
Since I didn´t break my MZP what do I have to do to get it working again??
gocks said:
C´mon guys, give me a break, I´m not a tech savy or something like that, just a regular lawyer.
Since I didn´t break my MZP what do I have to do to get it working again??
Click to expand...
Click to collapse
Flash the correct ROM, in the updater script it checks your phone version prior to flashing the ROM.
Go to the development threads and find yourself moto z play specific ROM and flash
Sent from my XT1635-02 using XDA-Developers Legacy app
flashallthetime said:
Flash the correct ROM, in the updater script it checks your phone version prior to flashing the ROM.
Go to the development threads and find yourself moto z play specific ROM and flash
Sent from my XT1635-02 using
Click to expand...
Click to collapse
I´ve already tried the specific ROM from 3 diferent sources but the problem persists. I´ve tried the custon one and other ROMs but the same erros keeps showing.
gocks said:
I´ve already tried the specific ROM from 3 diferent sources but the problem persists. I´ve tried the custon one and other ROMs but the same erros keeps showing.
Click to expand...
Click to collapse
Does the phone boot to the stock ROM?
You may want flash the specific firmware for your phone.
Sent from my XT1635-02 using XDA-Developers Legacy app
flashallthetime said:
Does the phone boot to the stock ROM?
You may want flash the specific firmware for your phone.
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
It does not boot to the stock ROM.
Just flashed the Nagout that you uploaded on another thread. It install but when I do the swipe after flashing the same error appears and the phone don´t boot. The error always appear after the "Updating partition details...." message.
After the installation I got this message:
Moto Z Play Nougat Installed
script suceeded: result was [Moto z P`lay Nougat Installed]
Updating partition details...
Failed to mount '/firmware' (invalid argument)
....done
Then I wiped the cache/dalvik and this occurs:
Formating Cache using make_ext4gs....
Updating partition details....
Failed to mount '/firmware' (invalid argument)
....done
Wiping Dalvil Cache Directories...
Cleaned: /data/dalvik-cache...
--Dalvik Cache Directories Wipe Complete!
Updating partition details...
Failed to mount '/firmware' (invalid argument)
....done
And when I reboot the system twrp ask to install a su wich I don´t install, the system reboot and after the message warning that my device is unlocked it goes to a dark screen and nothing happens.
AP Fastboot Flash Mode (Secure), is that correct?
Thanks again.
gocks said:
It does not boot to the stock ROM.
Just flashed the Nagout that you uploaded on another thread. It install but when I do the swipe after flashing the same error appears and the phone don´t boot. The error always appear after the "Updating partition details...." message.
After the installation I got this message:
Moto Z Play Nougat Installed
script suceeded: result was [Moto z P`lay Nougat Installed]
Updating partition details...
Failed to mount '/firmware' (invalid argument)
....done
Then I wiped the cache/dalvik and this occurs:
Formating Cache using make_ext4gs....
Updating partition details....
Failed to mount '/firmware' (invalid argument)
....done
Wiping Dalvil Cache Directories...
Cleaned: /data/dalvik-cache...
--Dalvik Cache Directories Wipe Complete!
Updating partition details...
Failed to mount '/firmware' (invalid argument)
....done
And when I reboot the system twrp ask to install a su wich I don´t install, the system reboot and after the message warning that my device is unlocked it goes to a dark screen and nothing happens.
AP Fastboot Flash Mode (Secure), is that correct?
Thanks again.
Click to expand...
Click to collapse
Download your firmware and flash in fastboot. Flash only the 10 sparsechunks,recovery, OEM.img and boot.img and erase user data.
Sent from my XT1635-02 using XDA-Developers Legacy app
flashallthetime said:
Download your firmware and flash in fastboot. Flash only the 10 sparsechunks,recovery, OEM.img and boot.img and erase user data.
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Dont know how to flash oem.img. It´s just fastboot oem unlock? If it is it gave me back invalid boot state.
Are the others commands and the order something like that:
fastboot flash system system.img_sparechunk.0 till 10
fastboot flash recovery recovery.img
IDK what´s the OEM.img command
fastboot flash boot boot.img
fastboot erase userdata
Thank you so much again!
gocks said:
Dont know how to flash oem.img. It´s just fastboot oem unlock? If it is it gave me back invalid boot state.
Are the others commands and the order something like that:
fastboot flash system system.img_sparechunk.0 till 10
fastboot flash recovery recovery.img
IDK what´s the OEM.img command
fastboot flash boot boot.img
fastboot erase userdata
Thank you so much again!
Click to expand...
Click to collapse
This is the commands
Fastboot flash recovery recovery.img
Fastboot flash boot boot.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Repeat all 10 sparsechunks
fastboot flash oem oem.img
Fastboot erase userdata
Fastboot reboot
Sent from my XT1635-02 using XDA-Developers Legacy app
flashallthetime said:
This is the commands
Fastboot flash recovery recovery.img
Fastboot flash boot boot.img
Fastboot flash system system.img_sparsechunk.0
Fastboot flash system system.img_sparsechunk.1
Repeat all 10 sparsechunks
fastboot flash oem oem.img
Fastboot erase userdata
Fastboot reboot
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Did exactly what you told me and this happened:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (16484 KB)...
OKAY [ 0.371s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.312s]
finished. total time: 0.683s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (10820 KB)...
OKAY [ 0.235s]
writing 'boot'...
(bootloader) Image not signed or corrupt
OKAY [ 0.235s]
finished. total time: 0.501s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system system.img
_sparsechunk.0
target reported max download size of 536870912 bytes
sending 'system' (257307 KB)...
OKAY [ 5.493s]
writing 'system'...
OKAY [ 3.985s]
finished. total time: 9.478s
The othes lines seems to be ok, but the phone continue stucked on the "Your device has been unlock...." and don´t reboot.
Downloaded another custom ROM (ADDISON_RETBR_6.0.1_MPNS24.104-44-7)
Unzipped into Minimal ADB and Fastboot folder
Openned Fastboot
Loaded bootloader and connected USB
>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (16484 KB)...
OKAY [ 0.376s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.312s]
finished. total time: 0.704s
>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.375s]
writing 'boot'...
(bootloader) Image not signed or corrupt
OKAY [ 0.296s]
finished. total time: 0.672s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system system.img
_sparsechunk.0
target reported max download size of 536870912 bytes
sending 'system' (257311 KB)...
OKAY [ 5.505s]
writing 'system'...
OKAY [ 3.971s]
finished. total time: 9.477s
>fastboot flash oem oem.img
target reported max download size of 536870912 bytes
sending 'oem' (105020 KB)...
OKAY [ 2.245s]
writing 'oem'...
OKAY [ 1.439s]
finished. total time: 3.688s
>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.151s]
finished. total time: 0.154s
>fastboot reboot
rebooting...
And nothing happens again after the reboot.
When I try to boot to recovery it gives me a "no command" screen with a "no command" message and just it.
Flashed the recovey.img from twrp and it is working ok.
My bootloader:
AP Fastboot Flash Mode (Secure) => in red
BL: C0.14 (sha-9325e5f, 2016-07-11 16:32:03)
Baseband: <not found>
Product/Variant: addison XT1635-02 32GB P7
Serial number: xxxxxxxxx
CPU: xxxxxx
eMNC: xxxxxx
DRAW: xxxxxxxxx
Console: [NULL]: null
Battery: OK
flashing_unlocked
Software status: Modified
Transfer Mode: USB Connected
Trying now ROM XT1635-02_ADDISON_RETBR_MPNS24.104-44-10_cid50_
Any clue? Thanx again.
gocks said:
Downloaded another custom ROM (ADDISON_RETBR_6.0.1_MPNS24.104-44-7)
Unzipped into Minimal ADB and Fastboot folder
Openned Fastboot
Loaded bootloader and connected USB
>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (16484 KB)...
OKAY [ 0.376s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.312s]
finished. total time: 0.704s
>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.375s]
writing 'boot'...
(bootloader) Image not signed or corrupt
OKAY [ 0.296s]
finished. total time: 0.672s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system system.img
_sparsechunk.0
target reported max download size of 536870912 bytes
sending 'system' (257311 KB)...
OKAY [ 5.505s]
writing 'system'...
OKAY [ 3.971s]
finished. total time: 9.477s
>fastboot flash oem oem.img
target reported max download size of 536870912 bytes
sending 'oem' (105020 KB)...
OKAY [ 2.245s]
writing 'oem'...
OKAY [ 1.439s]
finished. total time: 3.688s
>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.151s]
finished. total time: 0.154s
>fastboot reboot
rebooting...
And nothing happens again after the reboot.
When I try to boot to recovery it gives me a "no command" screen with a "no command" message and just it.
Flashed the recovey.img from twrp and it is working ok.
My bootloader:
AP Fastboot Flash Mode (Secure) => in red
BL: C0.14 (sha-9325e5f, 2016-07-11 16:32:03)
Baseband: <not found>
Product/Variant: addison XT1635-02 32GB P7
Serial number: xxxxxxxxx
CPU: xxxxxx
eMNC: xxxxxx
DRAW: xxxxxxxxx
Console: [NULL]: null
Battery: OK
flashing_unlocked
Software status: Modified
Transfer Mode: USB Connected
Trying now ROM XT1635-02_ADDISON_RETBR_MPNS24.104-44-10_cid50_
Any clue? Thanx again.
Click to expand...
Click to collapse
You flashed all the sparsechunks from 0 to 10?
The stock recovery has a dead Andy robot, so that flashed.
Did you flash the boot.img?
Sent from my XT1635-02 using XDA-Developers Legacy app
flashallthetime said:
You flashed all the sparsechunks from 0 to 10?
The stock recovery has a dead Andy robot, so that flashed.
Did you flash the boot.img?
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yep, exactly the way you told me to do.
ADDISON_RETBR_6.0.1_MPNS24.104-44-7 has a corrupted file, but it didn´t work with the ADDISON_RETBR_MPNS24.104-44-10_cid50_ too.
Will try another one. And thanx again.
gocks said:
Yep, exactly the way you told me to do.
ADDISON_RETBR_6.0.1_MPNS24.104-44-7 has a corrupted file, but it didn´t work with the ADDISON_RETBR_MPNS24.104-44-10_cid50_ too.
Will try another one. And thanx again.
Click to expand...
Click to collapse
Obviously the pacman rom screwed up your partition, normally every rom will check if you're flashing a rom to a specific device.
I don't think flashing any other firmware will help cause it's all the same from one carrier to another.
I think you may need to flash the entire firmware package but it MUST BE YOUR SPECIFIC FIRMWARE PACKAGE otherwise you'll really be bricked.
I'm pulling at straws
flashallthetime said:
Obviously the pacman rom screwed up your partition, normally every rom will check if you're flashing a rom to a specific device.
I don't think flashing any other firmware will help cause it's all the same from one carrier to another.
I think you may need to flash the entire firmware package but it MUST BE YOUR SPECIFIC FIRMWARE PACKAGE otherwise you'll really be bricked.
I'm pulling at straws
Click to expand...
Click to collapse
Don´t say the word brick, please!!!
What I have to do to know what is my specific firmware?
gocks said:
Don´t say the word brick, please!!!
What I have to do to know what is my specific firmware?
Click to expand...
Click to collapse
Which carrier are you with?
And don't sue me if things get worse
flashallthetime said:
Which carrier are you with?
And don't sue me if things get worse
Click to expand...
Click to collapse
Vivo, its a brazilian one.
Relax, if my phone bricks I wont sue you because my wife will kill me first!
I flashed TWRP recovery.img and found that I have diferent kinds of partitions, is it corret?
/data is f2fs
/cach /system /persist ext4
/efs1 emmc
/external_sd and usb-otg vfat
gocks said:
I flashed TWRP recovery.img and found that I have diferent kinds of partitions, is it corret?
/data is f2fs
/cach /system /persist ext4
/efs1 emmc
/external_sd and usb-otg vfat
Click to expand...
Click to collapse
Yes and it seems like you can't right to the system and or data partitions. There's more partitions but they're locked or hidden
Try to format your data in TWRP
and wipe system

Huge problem with moto z2 play trying to flash twrp

Hi. Today I decided to root my device (Moto Z2 Play, XT1710-06) and install a good custom ROM, but after unlocking bootloader I tried to flash the recovery with the command fastboot
PHP:
flash recovery twrp.img
and I got the message
PHP:
error: cannot open 'twrp.img'
. So I went with the newest version for albus (twrp-3.2.3-0-albus.img) and I got this:
PHP:
target reported max download size of 534773760 bytes
sending 'recovery' (15564 KB)...
OKAY [ 0.344s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.195s]
finished. total time: 0.539s
After partially flashed it I could only use it once. When rebooting to system (stock) it would overwrite the stock recovery, so TWRP would dissapear. Then I decided to root with the stock ROM in but it got bootlooped.
Finally, I flash recovery again so I could wipe (Including data and system) and install a custom ROM, but didn't work yet because the error messages I get in TWRP after trying to flash the ROMs zip is ERROR 255. I have tried with ToxicRom, LineageOS and Pixel Experience.
What's happening? Did I do wrong wiping the stock system? I'll appreciate any help.
Thanks for reading.
Caney said:
Hi. Today I decided to root my device (Moto Z2 Play, XT1710-06) and install a good custom ROM, but after unlocking bootloader I tried to flash the recovery with the command fastboot
PHP:
flash recovery twrp.img
and I got the message
PHP:
error: cannot open 'twrp.img'
. So I went with the newest version for albus (twrp-3.2.3-0-albus.img) and I got this:
PHP:
target reported max download size of 534773760 bytes
sending 'recovery' (15564 KB)...
OKAY [ 0.344s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.195s]
finished. total time: 0.539s
After partially flashed it I could only use it once. When rebooting to system (stock) it would overwrite the stock recovery, so TWRP would dissapear. Then I decided to root with the stock ROM in but it got bootlooped.
Finally, I flash recovery again so I could wipe (Including data and system) and install a custom ROM, but didn't work yet because the error messages I get in TWRP after trying to flash the ROMs zip is ERROR 255. I have tried with ToxicRom, LineageOS and Pixel Experience.
What's happening? Did I do wrong wiping the stock system? I'll appreciate any help.
Thanks for reading.
Click to expand...
Click to collapse
Flash Magisk, after TWRP.
I kinda solved it. Now I'm on Resurrection Remix Oreo but Magisk 18.0 can't be flashed, neither on LineageOs 15.1
I have the xt1710-06 that the operating system is 32 bit from Argentina
I do not know if it's the same cell phone I finally see that someone manages to install the twrp and a custom rom could do a tutorial please?
there is no tutorial for this model and I do not know if you can install a 64bit android in one that has a 32bit operating system
THANKS
Hi, how did you solve it?
Boot TWRP, then flash it from inside TWRP. Flashing from fastboot always throws some error, but just booting the same image has no problem. And of course TWRP can flash itself.
When flashing Magisk, make sure it keeps dm-verity and enforce encrypt. At least Magisk v19 doesn't give me any problem when setting them before. I think v18 was a version acting up here and there

Rooting Motorola One Action w/ Android 10

I have Motorola One Action w/ Android 10 running. I need to root this phone to recover the data. However, when following the instruction, I received the following error message.
C:\adb>fastboot boot TWRP-3.3.1_Motorola_One_Vision.img
downloading 'boot.img'...
OKAY [ 1.118s]
booting...
FAILED (remote failure)
finished. total time: 1.305s
Can anyone help me what to do?
Thank you very much for your help.
[email protected] said:
I have Motorola One Action w/ Android 10 running. I need to root this phone to recover the data. However, when following the instruction, I received the following error message.
C:\adb>fastboot boot TWRP-3.3.1_Motorola_One_Vision.img
downloading 'boot.img'...
OKAY [ 1.118s]
booting...
FAILED (remote failure)
finished. total time: 1.305s
Can anyone help me what to do?
Thank you very much for your help.
Click to expand...
Click to collapse
Hi!!
I have a model XT2013-1. I was having the same problem as you, so I updated TROIKA-RETBR on 02/22/2020.
After updating, I did the procedure of this link "https://forum.xda-developers.com/one-action/how-to/twrp-magisk-root-motorola-one-action-t3975883", skipping the step "8.2- Now tap on Wipe> Format Data> Type Yes and go back to the home screen again. " This step gave me the looping error.
Now root works perfect !!
Thank you very much. I will try it.
BL1ND4D0 said:
Hi!!
I have a model XT2013-1. I was having the same problem as you, so I updated TROIKA-RETBR on 02/22/2020.
After updating, I did the procedure of this link "https://forum.xda-developers.com/one-action/how-to/twrp-magisk-root-motorola-one-action-t3975883", skipping the step "8.2- Now tap on Wipe> Format Data> Type Yes and go back to the home screen again. " This step gave me the looping error.
Now root works perfect !!
Click to expand...
Click to collapse
I am still getting the following error message. I have no idea why. Would you please help me what to do? Thank you very much.
fastboot flash recovery twrp.img
(bootloader) is-logical:recovery: not found
Sending 'recovery' (37524 KB) OKAY [ 1.209s]
Writing 'recovery' (bootloader) Invalid partition name recovery
FAILED (remote: '')
fastboot: error: Command failed
[email protected] said:
I am still getting the following error message. I have no idea why. Would you please help me what to do? Thank you very much.
fastboot flash recovery twrp.img
(bootloader) is-logical:recovery: not found
Sending 'recovery' (37524 KB) OKAY [ 1.209s]
Writing 'recovery' (bootloader) Invalid partition name recovery
FAILED (remote: '')
fastboot: error: Command failed
Click to expand...
Click to collapse
It's A/B device so it doesn't have dedicated recovery partition. It's inside boot.img.
Use fastboot boot twrp.img
Once booted to twrp, you can use the twrp installer zip to flash twrp recovery ramdisk to your boot.img for permanent installation.
tys0n said:
It's A/B device so it doesn't have dedicated recovery partition. It's inside boot.img.
Use fastboot boot twrp.img
Once booted to twrp, you can use the twrp installer zip to flash twrp recovery ramdisk to your boot.img for permanent installation.
Click to expand...
Click to collapse
Thank you very much for your help. I tried but I was still getting the following error message.
fastboot boot twrp.img
Sending 'boot.img' (37524 KB) OKAY [ 0.990s]
Booting FAILED (remote: '')
fastboot: error: Command failed
Would you tell me what to do?
[email protected] said:
Thank you very much for your help. I tried but I was still getting the following error message.
fastboot boot twrp.img
Sending 'boot.img' (37524 KB) OKAY [ 0.990s]
Booting FAILED (remote: '')
fastboot: error: Command failed
Would you tell me what to do?
Click to expand...
Click to collapse
Did you follow all instructions from twrp thread. like flashing modified vbmeta and wipe data before booting twrp?
Also take a look at the original thread for one vision as it has a newer zip that contains only one modified vbmeta.img instead of two different ones in the older zip that is posted in one action's twrp thread.
I rooted using fastboot, I could never get into TWRP to flash anything.
In fastboot, I flashed the modified vbmeta.img, then flashed the magisk patched boot img file (I created this with magisk), then flashed the patched vbmeta.img file, then did a fastboot wipe.
Rebooted, set up the phone, installed magisk manager and opened, it needed to update some files. Rebooted, and the device was rooted.
goofball2k said:
I rooted using fastboot, I could never get into TWRP to flash anything.
In fastboot, I flashed the modified vbmeta.img, then flashed the magisk patched boot img file (I created this with magisk), then flashed the patched vbmeta.img file, then did a fastboot wipe.
Rebooted, set up the phone, installed magisk manager and opened, it needed to update some files. Rebooted, and the device was rooted.
Click to expand...
Click to collapse
Thank you very much for your input. You must be an expert! WOW! Sorry I am not that expert........ Would you mind explaining (1) how to modify vbmeta.img and (2) how to patch boot.img? It is very impressive to read what you have done, but sorry I am still a beginner. Also, when I flash, "fastboot flash (File Name)" ok?
Thank yuo very much for your help.
[email protected] said:
Thank you very much for your input. You must be an expert! WOW! Sorry I am not that expert........ Would you mind explaining (1) how to modify vbmeta.img and (2) how to patch boot.img? It is very impressive to read what you have done, but sorry I am still a beginner. Also, when I flash, "fastboot flash (File Name)" ok?
Thank yuo very much for your help.
Click to expand...
Click to collapse
You don't need to modify vbmeta.img. I am using the older version of the root Moto Vision package, which has a vbmeta.img file, and a patched vbmeta.img file.
For the modified boot img, I downloaded the full image from https://mirrors.lolinet.com/firmware/moto/troika/official/
Extract, and then take the boot.img file, you will want that saved to a phone that has Magisk installed.
Follow these instructions to patch
https://www.ytechb.com/how-to-patch-a-file-in-magisk-manager/
Once you have that, you will want that patched file into the fastboot directory on your computer. You will also want the vbmeta and the patched vbmeta img files (from the root moto vision package) in this directory. I have not used the updated version, I am using the older. I don't know about using the newer package which only has 1 vbmeta file.
Put your phone into fastboot mode.
Flash the vbmeta.img file, then the magisk patched boot file, then the vbmeta patched file. Then do a fastboot wipe of the phone.
Reboot the phone.
Set it up again, install magisk manager, then open it, and it should ask to configure. Let it do that, it should reboot and after that, you should be rooted.
[email protected] said:
I have Motorola One Action w/ Android 10 running. I need to root this phone to recover the data. However, when following the instruction, I received the following error message.
C:\adb>fastboot boot TWRP-3.3.1_Motorola_One_Vision.img
downloading 'boot.img'...
OKAY [ 1.118s]
booting...
FAILED (remote failure)
finished. total time: 1.305s
Can anyone help me what to do?
Thank you very much for your help.
Click to expand...
Click to collapse
I guess goofball2k detailed reply might have helped by now. On the other hand, I'm just curious to know that the next time you or anyone else for that matter face the same issue, please flash the stock firmware (using any of the Android 10 tools from here ) at that instance, then again start the same process and let me know whether you succeed or not (you will still have to execute the fastboot boot twrp command around 4-8 times, but during all these attempts, you should now get the success message, and after x number of attempts, you should succeed). So in short, if flashing the stock firmware after that error helps you out, do let me know
Thank you
binary**# said:
I guess goofball2k detailed reply might have helped by now. On the other hand, I'm just curious to know that the next time you or anyone else for that matter face the same issue, please flash the stock firmware (using any of the Android 10 tools from here ) at that instance, then again start the same process and let me know whether you succeed or not (you will still have to execute the fastboot boot twrp command around 4-8 times, but during all these attempts, you should now get the success message, and after x number of attempts, you should succeed). So in short, if flashing the stock firmware after that error helps you out, do let me know
Click to expand...
Click to collapse
Thank you very much for your input.
How are you!!
It doesn't leave me at all ... everything I want to flash throws the same error:
C:\platform-tools>fastboot boot vbmeta.img
creating boot image...
creating boot image - 6144 bytes
downloading 'boot.img'...
OKAY [ 0.013s]
booting...
FAILED (remote failure)
finished. total time: 0.184s
What can be?
Polnareff said:
How are you!!
It doesn't leave me at all ... everything I want to flash throws the same error:
C:\platform-tools>fastboot boot vbmeta.img
creating boot image...
creating boot image - 6144 bytes
downloading 'boot.img'...
OKAY [ 0.013s]
booting...
FAILED (remote failure)
finished. total time: 0.184s
What can be?
Click to expand...
Click to collapse
You aren't flashing, your command is trying to boot from vbmeta.img. You are missing the flashing command.

Categories

Resources