My yureka plus is on CM 12.1 . Now when using the device it locks automatically and wall paper changes to default automatically. The screen locks freequently. I cant use the device or cant even set a wallpaper for sometime as it changes automatically.
please help me ..
I'm also facing same issues..is there any fix available?
Same issue, Any soluation
I'm also facing same issues..is there any fix available?
Same issue in Yureka Plus
Screen locks for a few seconds while using and sets wallpaper to default wallpaper .. Cannot believe it is an official ROM. How can a company treat its customers like **** ..Powerful specs ,only to be destroyed by the worst software optimisation :crying:
screen getting off while using mobile
I'm also facing same issues..is there any fix available?
It is the common problem facing by most of the members in cm12.1, the solution is use the system theme rather than any other theme.
My yureka is on CM 12.1 and Android 5.1. Now when using the device it locks automatically and wall paper changes to default automatically. The screen locks freequently. I cant use the device or cant even set a wallpaper for sometime as it changes automatically.
Same problem with me
When I contacted customer care they stated me to do flashing. But still it has not gone away. After that they said that we will replace your device. I don't know whether they will give me a replaced 2nd hand mobile or a new one. Should I go for exxgange or is it a software problem that will fine in future.
Hey I have got a solution for this . Go to your device settings and then Privacy. Then go to privacy guard. There are three dots on upper right corner. CLICK ON THAT AND SELECT SHOW BUILT IN APPS. Now search for Google play services and hold on Google play services. Scroll downside and search for auto start and keep awake. Turn them off. But keep sure that (keep awake ) is enabled.
If it help you please thanks me.
If Finally your Problem is not solve then install Flash File of 12.1 from Below Link and again Flash then use without any issue.:-----
builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed.zip
Warnings:
Officially we (Team) will advise you to Go for OTA , Its safe and secure and it will help us identify you individually as well as sort problems too in future .
MAKE SURE THIS SHOULD FOLLLOW IN MOBILE NOT ON PC OR LAPTOP
WARNING: ONCE YOU HAVE UPGRADED TO LOLLIPOP (cm-12S) THEN DO NOT FLASH THE KITKAT (cm-11S) IMAGES AS IT MAY LEAD TO THE DEVICE GETTING BRICKED!
Guide:
Step 1 : Download the official CM12s ROM for Yu Yureka "cm-12.1-YNG1TAS1K0-tomato-signed.zip" from one of the links above
Step 2 : Copy the downloaded file onto the device memory – suggest you to copy it into the root folder
Step 3 : Flashing the OTA using Stock Cyanogen recovery
a. Switch OFF the mobile.
b. Press 3 buttons together(volume UP+volume DOWN+Power button) till the phone starts up again.
c. Go with the Option 2 (Apply Updates) and Select Apply update from Internal or SD Card.
d. Click on “0/” option.
e. Select the file "cm-12.1-YNG1TAS1K0-tomato-signed.zip". The ROM will be flashed and you should be seeing the Android Boot
Step 4 : Upgrading process will begins and after that again recovery options will appear.
Step 5 : Once installation is over, go to main page and ‘wipe cache partition‘.
Step 6 : Then select Reboot system now.
Done..! (Process will take some 40-45mins for full boot up)
Note : Before following above mention steps please take the backup of your all important data.
Screen getting off & wallpaper changing automatically
Changing YU theme to System Theme. AS Fixed my Screen getting off & wallpaper changing automatically problem for me.
Goto Setting theme change it to system theme
Hope it will help others too.
kiran474 said:
Changing YU theme to System Theme. AS Fixed my Screen getting off & wallpaper changing automatically problem for me.
Goto Setting theme change it to system theme
Hope it will help others too.
Click to expand...
Click to collapse
Thanks.
kiran474 said:
Changing YU theme to System Theme. AS Fixed my Screen getting off & wallpaper changing automatically problem for me.
Goto Setting theme change it to system theme
Hope it will help others too.
Click to expand...
Click to collapse
helped me too, thanks a ton, so for 20 mins and no issue, will see further:good::good:
ashwani5 said:
helped me too, thanks a ton, so for 20 mins and no issue, will see further:good::good:
Click to expand...
Click to collapse
Its still working, i suspected that it might be the issue, but tried after your post and gues what, it worked. Yupeeeeee[emoji106]
Sent via yureka
hrishikesh829 said:
My yureka plus is on CM 12.1 . Now when using the device it locks automatically and wall paper changes to default automatically. The screen locks freequently. I cant use the device or cant even set a wallpaper for sometime as it changes automatically.
please help me ..
Click to expand...
Click to collapse
Just clear the cache in recovery mode.I am also facing this issue.It seems that somehow cache management is not working and that's why it's happening.I still have to clear cache every once in a while to prevent any such problem
Sohamdas194 said:
Just clear the cache in recovery mode.I am also facing this issue.It seems that somehow cache management is not working and that's why it's happening.I still have to clear cache every once in a while to prevent any such problem
Click to expand...
Click to collapse
Since the time i restored system theme I'm not facing this issue. I even didn't have to clear cache
Sent via yureka
Rocko.315 said:
If Finally your Problem is not solve then install Flash File of 12.1 from Below Link and again Flash then use without any issue.:-----
builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed.zip
Warnings:
Officially we (Team) will advise you to Go for OTA , Its safe and secure and it will help us identify you individually as well as sort problems too in future .
MAKE SURE THIS SHOULD FOLLLOW IN MOBILE NOT ON PC OR LAPTOP
WARNING: ONCE YOU HAVE UPGRADED TO LOLLIPOP (cm-12S) THEN DO NOT FLASH THE KITKAT (cm-11S) IMAGES AS IT MAY LEAD TO THE DEVICE GETTING BRICKED!
Guide:
Step 1 : Download the official CM12s ROM for Yu Yureka "cm-12.1-YNG1TAS1K0-tomato-signed.zip" from one of the links above
Step 2 : Copy the downloaded file onto the device memory – suggest you to copy it into the root folder
Step 3 : Flashing the OTA using Stock Cyanogen recovery
a. Switch OFF the mobile.
b. Press 3 buttons together(volume UP+volume DOWN+Power button) till the phone starts up again.
c. Go with the Option 2 (Apply Updates) and Select Apply update from Internal or SD Card.
d. Click on “0/” option.
e. Select the file "cm-12.1-YNG1TAS1K0-tomato-signed.zip". The ROM will be flashed and you should be seeing the Android Boot
Step 4 : Upgrading process will begins and after that again recovery options will appear.
Step 5 : Once installation is over, go to main page and ‘wipe cache partition‘.
Step 6 : Then select Reboot system now.
Done..! (Process will take some 40-45mins for full boot up)
Note : Before following above mention steps please take the backup of your all important data.
Click to expand...
Click to collapse
Can I do the above if I have already updated once to cm 12.1/android 5.1.1? Please help!!!
Thanks Abhishek shewag it worked, but lil confused u said turn of stay awake n again u say make sure its enabled... Wht it really mean?
My yureka plus is on CM 12.1 . Now when using the device it locks automatically and wall paper changes to default automatically. The screen locks freequently. I cant use the device or cant even set a wallpaper for sometime as it changes automatically.
please help me ..
thanks!!!
Abhishek Sehwag said:
Hey I have got a solution for this . Go to your device settings and then Privacy. Then go to privacy guard. There are three dots on upper right corner. CLICK ON THAT AND SELECT SHOW BUILT IN APPS. Now search for Google play services and hold on Google play services. Scroll downside and search for auto start and keep awake. Turn them off. But keep sure that (keep awake ) is enabled.
If it help you please thanks me.
Click to expand...
Click to collapse
Hi newcomer(newbie) to xda . Thanks a lot abhishek. guys this I was facing the same problem thanks to abhishek it got resolved . Keep up the good work ....
Related
Hi , I have installed ProjectAndroid2.2Froyo.110110.cab and after boot up , it says 'This version of LauncherPro has expired' .
With this problem , I can do anything for the Android even enter the 'setting' .
Any buddy can help me figure out what's the problem is ?
sunyakun420 said:
Hi , I have installed ProjectAndroid2.2Froyo.110110.cab and after boot up , it says 'This version of LauncherPro has expired' .
With this problem , I can do anything for the Android even enter the 'setting' .
Any buddy can help me figure out what's the problem is ?
Click to expand...
Click to collapse
just go to launcherpro.com on ur phone and download the latest update apk file then install it when finished downloading and make sure to check under settings and applications unknows sources b4 u install
sunyakun420 said:
Hi , I have installed ProjectAndroid2.2Froyo.110110.cab and after boot up , it says 'This version of LauncherPro has expired' .
With this problem , I can do anything for the Android even enter the 'setting' .
Any buddy can help me figure out what's the problem is ?
Click to expand...
Click to collapse
x_cell3217 said:
just go to launcherpro.com on ur phone and download the latest update apk file then install it when finished downloading and make sure to check under settings and applications unknows sources b4 u install
Click to expand...
Click to collapse
i don't think he will be able to do that because he said it won't launch so he can't even get past the expired screen on android, i had that issue and wasn't able to upadte to the newer launcher.
What i did was in windows look for another kind of launcher like open home and make sure it is in .apk format, then you go to your storage card and go to the andboot folder/Androidapps folder and put the file here. Before you run haret click on the right soft key and choose apps. Look for the launcher you downloaded and put a check by it then run haret. when android boots up it's going to ask which launch you want to use and you select the new one. Then i would install Titanium back up if you don't already have it and uninstall launchpro then do the upgrade posted above.
Hi there,
First off I would like to thank AngSanley for his work on the 4.4.4 CM 11 ROM, absolutely excellent development and keep up the good work. Hopefully I thought I would make a bug report here since i still can't post in the X development section:
1. Phone.apk problems:
a. Operator and Caller names coincide with each other (Issue was mentioned before in the thread however still looking forward to hearing from @AngSanley for a reply)
b. Repeated Missing Calls crash the com.android.phone process and the only solution is to call the missing call to get the phone app running again. To emulate that leave the call until it ends twice and see what happens
2. System Processes
In Jelly Bean and Ice Cream Sandwich you were able to disable system stock apps such as Browser, email, messages and it was possible to install the playstore apps as a replacement. I was wondering if it's still possible to enable that in the current ROM or it's not a bug as of the new releases.
Note: This also includes Trebuchet since I'm not currently using it.
3. Reboots in some cases disables the home button action in UDNB and prevents the lockscreen process from running properly which requires me to reinstall the ROM and Gapps while clearing cache and Delvik or by force stop and enabling lockscreen (which gets me to problem 2 sometimes).
Thank you again for the ROM and looking forward to hearing about upcoming updates with the ROM.
For the first issue, the problem is known. I mentioned it but it's difficult to fix.
For the third issue though, I found a solution. I disabled UDNB and installed Soft Buttons app. If the buttons crash, I disable them from the app and immediately enable them again. I reboot and... that's all!
(as for the second, I use some stock apps, so I can't tell you for sure)
Sent from Tapatalk via Nokia X
For the first issue, the problem is known. I mentioned it but it's difficult to fix.
Click to expand...
Click to collapse
Hopefully it gets addressed because it makes the phone literally unusable. The current list by AngSanley doesn't show it so I hope it's addressed to him.
For the third issue though, I found a solution. I disabled UDNB and installed Soft Buttons app. If the buttons crash, I disable them from the app and immediately enable them again. I reboot and... that's all!
Click to expand...
Click to collapse
Any specific app on the playstore because there are many apps for it
(as for the second, I use some stock apps, so I can't tell you for sure)
Click to expand...
Click to collapse
No problem it's fine. The imitation of it can be made if you even disable messages for example. It shows immediately that the phone loses functionality especially in the lockscreen process.
I'm really looking forward to hearing from @AngSanley on these. Especially on the phone process issue .
ElementalXY said:
Any specific app on the playstore because there are many apps for it
Click to expand...
Click to collapse
Couldn't attach it from Tapatalk. Here you are!
(Note that you MUST disable UDNB from Settings > Apps first, because the phone will show you 2 navbars!)
plankton69 said:
Couldn't attach it from Tapatalk. Here you are!
(Note that you MUST disable UDNB from Settings > Apps first, because the phone will show you 2 navbars!)
Click to expand...
Click to collapse
Thank you very much . It's working well and even better than UNDB!
PS: I can now post in the development section so is it possible to repost it over there instead or wait for AngSanley?
Yea bro....ur all mentioned bugs are also happend with the me... and there is also a big problem.... this bug happed with me two times and i need to wipe dalvik cacke two times....
so that problem is when i install xpossed app n when i restart than the statusbar gone.. it says com.androd.systemui.apk stopped... plz find way to fix it without wipe dalcik cacke
n second problem is whn i install any new theme n appy n restart my phone than same happens.... please do something brohers... love this rom ... really awsm..
Yea bro....ur all mentioned bugs are also happend with the me...
Click to expand...
Click to collapse
Does the phone crash happen with you too in missed calls? If not then I honestly think I should wipe the phone haha.
yes... i also get that error phone procced stopped.... but i pressed ok button 4 5 times and its stopped... but if i donwload any cm theme and after appy it when i restart mob the process of sytemui stopped than i need to to wipe data that time tht ok button not working.. please find any trick repair it without formating data..
ElementalXY said:
Does the phone crash happen with you too in missed calls? If not then I honestly think I should wipe the phone haha.
Click to expand...
Click to collapse
You should. Do a full wipe before flashing CM11.
Dom3616 said:
You should. Do a full wipe before flashing CM11.
Click to expand...
Click to collapse
Unfortunately I won't be able to do that since I just bricked my phone while formatting to the original stock version lol. I'm currently stuck on Nokia Emergency Connectivity and will be sending it to the Nokia care center next month haha. I'll be doing a fresh install when I get it back.
PS: I'm guessing no solutions for this problem outside the warranty am I right?
ElementalXY said:
Unfortunately I won't be able to do that since I just bricked my phone while formatting to the original stock version lol. I'm currently stuck on Nokia Emergency Connectivity and will be sending it to the Nokia care center next month haha. I'll be doing a fresh install when I get it back.
PS: I'm guessing no solutions for this problem outside the warranty am I right?
Click to expand...
Click to collapse
Yes you are right.
L has been out for a couple of weeks for now and after flashing the L port from android develoment page I noticed that in the power menu there was no options for "rebooting to recovery" so I put these together:
View attachment Reboot.4.apk
View attachment Reboot_Recovery.3.apk
View attachment Reboot_Bootloader.1.apk
The names are self explaining but I am not responsible if u get put into a boot loop or anything like that.
I am going to be making more things like this but here is the link for my original thread: http://forum.xda-developers.com/nexus-4/themes-apps/cool-tasker-apps-t2869234 that I started posting apps like this on
TO USE THIS JUST DOWNLOAD THE OPTIONS YOU WANT AND INSTALL THEM. NEXT JUST CLICK ON THE APP AND GRANT SUPER SUER PREMISON THEN CLICK ON THE APP AND IT WILL REBOOT TO RECOVERY OR JUST REBOOT YOU OR REBOOT YOU INTO YOUR BOOTLOADER
Just in time, just flashed Android L (9001) and I want Reboot Menu options like previous custom roms tweaked..
thanks and trying it now.. feedbacks in a moment
hope i wont get bootloop
No problem did it work?, I myself am using 9001 and it works great. Check out my other thread (link up top) I have more lile this one.
1619415 said:
No problem did it work?, I myself am using 9001 and it works great. Check out my other thread (link up top) I have more lile this one.
Click to expand...
Click to collapse
Yeah it works, but it would be better if its only 1 app when click it pop-ups the reboot recovery, bootloader & turn-off menu...
SimpleAOSP + UKM/Synapse = Nexus 4 Glider-X
yethz said:
Yeah it works, but it would be better if its only 1 app when click it pop-ups the reboot recovery, bootloader & turn-off menu...
SimpleAOSP + UKM/Synapse = Nexus 4 Glider-X
Click to expand...
Click to collapse
Thank you for responding, I'll see what I can do. I personaly didn't want to make a advanced power menu but ill go ahead and give it a try.
Hello Everyone,
Some weeks back I installed latest version of LineAge OS : 14.1-20170209-UNOFFICIAL-onyx on my one plus X phone. So after playing around with it found that there were lots of issues so I decided to uninstall it and tried it by tapping 7 times on the build number and guys nothing comes up. I am not able to activate Developer Mode on my phone. Need your help ASAP !!!
Build Number : onyx-userdebug 7.1.1 NMF26V feaeeb615e test-keys. So guys need your inputs because it contains lots of bugs. No notification feature etc. So please I don't have any idea what should I do so please post your suggestions.
Guys any inputs ?? Pls help me
One more thing guys... Below are the things which are not working on my phone
Tapping 7 times !!! Developer options not showing up
No Notifications at all... I can hear the sounds but no success to show notifications
Google Store updates & Installation suddenly stopped...
Reset Everything Option Not working...
Guys seriously suggest me some solution....
Just launch setup wizard... Problem will solved
krishu_s said:
Just launch setup wizard... Problem will solved
Click to expand...
Click to collapse
/
Which setup wizard ur talking about ?>
Download https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut
•search for setup wizard and launch it.
Problem solved.
It didn't work for me. When trying to open Setup Wizard, it says App isn't installed.
For me, the Setup Wizard also didn't work. I used TWRP to wipe Dalvik Cache, System, Data and Cache and then re-installed the ROM. That is pretty much a factory reset (didn't lose any photo's and other files), but it worked.
One plus one - lineage OS devolper options location.
if you are googling this in 2019 then it is a bit more hidden in Lineage OS. After tapping the build number 7 times. select system (It's above about phone) > Tap Advanced and it's the second last option. It took me a while figure this out.
If you come from stock rom it normally is in the main menu of settings. Personally it was a bad design choice to put it there instead of the default location.
Denzi00 said:
if you are googling this in 2019 then it is a bit more hidden in Lineage OS. After tapping the build number 7 times. select system (It's above about phone) > Tap Advanced and it's the second last option. It took me a while figure this out.
If you come from stock rom it normally is in the main menu of settings. Personally it was a bad design choice to put it there instead of the default location.
Click to expand...
Click to collapse
2020 and so on point! Thanks! :good::good::good:
Worked perfect!!!
SatyrXX said:
2020 and so on point! Thanks! :good::good::good:
Click to expand...
Click to collapse
I just tried this process with LineageOS 17.1 and worked perfect, thanks for the instructions!
I have the N975U1 USA unlocked and when I try to check for a software update via wifi in setting it just shows checking an does not finish. There also a very quick pop up that occurs sometimes that says firmware firmware restriction or something like that ... it's so quick I can't read.
When I check via mobile data it works 100 percent and the most recent update I had to check and take off wifi check via data . Put back on wifi to download the update then finally take it back off to install it ..
I did do a cache clear via recoverery ... Please help
death365 said:
I have the N975U1 USA unlocked and when I try to check for a software update via wifi in setting it just shows checking an does not finish. There also a very quick pop up that occurs sometimes that says firmware firmware restriction or something like that ... it's so quick I can't read.
When I check via mobile data it works 100 percent and the most recent update I had to check and take off wifi check via data . Put back on wifi to download the update then finally take it back off to install it ..
I did do a cache clear via recoverery ... Please help
Click to expand...
Click to collapse
This advice might help a bit..
Regarding, the toast pop up that you can't read, you can either install "Nice Catch" which is part of Samsungs, Good Lock app.
If you can't download, Good lock app from
Galaxy Store then you can download /sideload, the stand alone apk, from Apkmirror web site.
Then manually install apk .
Please note if you sideload app, it won't show in app drawer. You have to use a shortcut method
eg Nove Launcher /(then long press on desktop screen .) /Nova widgets / activities , search for" Nice catch" and create short cut,. to desktop screen. Then tap on it and configure.
Otherwise, you can download an app from Play Store
eg. "Toast Source" (free app) etc.
This method is maybe faster and less hassle.?
If any of these above apps are enabled it will "catch/record" all you toasts as notifications and also save the toast pop-ups.
It might not solve you issue directly, but at least it is a start
to read the popup toast?
See screenshots
Good luck.
Will try thanks
This is what I saw ... it's from a app device info
death365 said:
This is what I saw ... it's from a app device info
Click to expand...
Click to collapse
I'm not sure how explain this......
but is you phone not a company device or has device some rental agreement , plan etc.
I have read on past post on XDA forums that members could not update, as their devices were "locked" ...?
Otherwise did you use any app like eg... App Disabler Pro etc etc.
That you disable an app and it has a knock on effect.?
Bottom line,
you now have a reason why not updating..
as toast says something "systems" is disable.?
Good luck..
yeah i might have to do a hard reset to see if that helps
death365 said:
yeah i might have to do a hard reset to see if that helps
Click to expand...
Click to collapse
Well toast says "systemfs" is disabled.
Well i personally can't disable it on my device as device is
stock not rooted etc. Also i have not used any disabler app.
For the "sysfs... @ systemfs??? " to be disabled, I'm sure you have to be rooted...?
or as stated above, you disabled some system app with a eg "Disabler Pro" app. etc.
Bottom line. again ..
Hopefully a factory reset should rectify the relevant system error..
Somehow it got corrupted.
Good luck.