Develop Bugs

[RECOVERY][SM-E500] TeamWin Recovery Project (TWRP) 2.8.1.0

Hey everyone. This is TWRP recovery that I compiled for the Galaxy E5 lte version (SM-E500F.)
It has been tested in F and M variant
curently tested on :
1.SM-E500F
2.SM-E500M
you can test it on your phone and report here if its working for you.I will then add it to the list.
Disclaimer:
If you have decided to install this recovery on your device, I cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences you may experience (bricks,.). By installing this custom ROM you lose your phone's warranty.
By installing this, you accept this disclaimer.
Click to expand...
Click to collapse
>>HOW TO FLASH VIA ODIN:
1)Boot into download mode by pressing volume down,home button and power on button
2)start odin and connect phone with the usb cable
3)put the recovery package in AP or PDA tab.
4)check that only F.reset time and Auto reboot are checked
5)Flash and enjoy.:angel:
ISSUES:
-brightness is not yet working
-reboot to recovery boots back to system.
'
DOWNLOAD:
For SM-E500F
SM-E500F TWRP
Click to expand...
Click to collapse
For SM-E500M
SM-E500M twrp
Click to expand...
Click to collapse
Credits:
TWRP: for creating the awesome recovery
@eabz2000 : for help and testing
 @Bin.g dallie
Press thanks if it was useful to you

Device tree
Kernel source

Tested on variant SM-E500M.
- Brightness not working.
- But reboot to system is working perfect.

only for e5? nothing for e7?

Chaninoza said:
only for e5? nothing for e7?
Click to expand...
Click to collapse
Dont worry @Chaninoza. I have both E5 and E7 . I will compile for E7 after Its stable enough. It will be in couple of weeks.

Make a CWM for galaxy E5-E500H 5.1.1
Sent from my SM-E500H using Tapatalk

Sabbir. said:
Make a CWM for galaxy E5-E500H 5.1.1
Sent from my SM-E500H using Tapatalk
Click to expand...
Click to collapse
Sabbir. TWRP for SM-E500H already exists. Here is link: http://forum.xda-developers.com/galaxy-e-series/orig-development/recovery-twrp-galaxy-e5-t3209865

Help

Sabbir. said:
Help
Click to expand...
Click to collapse
Qhat help do you need?

Can't ifnd file
My Odin isn't recognizing the .img file

iPepita said:
My Odin isn't recognizing the .img file
Click to expand...
Click to collapse
Use flashify for flashing the img file

nepalbiraj said:
Dont worry @Chaninoza. I have both E5 and E7 . I will compile for E7 after Its stable enough. It will be in couple of weeks.
Click to expand...
Click to collapse
the rom E500M works in E700M ? 5.1.1

LudwigFerdinand18 said:
the rom E500M works in E700M ? 5.1.1
Click to expand...
Click to collapse
no E500M rom doesnot work on E700M

nepalbiraj said:
no E500M rom doesnot work on E700M
Click to expand...
Click to collapse
for example I pick up a rom from another cell by TWRP backup and modify the build.prop ... work just changing the partition / system?

LudwigFerdinand18 said:
for example I pick up a rom from another cell by TWRP backup and modify the build.prop ... work just changing the partition / system?
Click to expand...
Click to collapse
You can try and see if it boots.

It's working on 4.4.4 and 5.1.1 you don't need to worry about it

Without using odin
You can install it from your phone ? Without using odin

[ROM] LineageOS 13

DISCLAIMER​
!!! DISCLAIMER AND A WARNING !!!
I'm not responsible if you do any damage to your device
I'm not responsible if your device ends up in a brick state
You take full responsibility of everything in this, so please
be careful!
!!! DISCLAIMER AND A WARNING !!!
REQUIREMENTS​
A working Galaxy S6 (SM-G920F only)
Root Access
A Custom Recovery
Click to expand...
Click to collapse
BUGS​
BT
Click to expand...
Click to collapse
HOW TO INSTALL​
1. Make sure you rooted your device and have installed a custom recovery
2. Boot into TWRP or whatever your recovery is
3. Go to MOUNT section and mount the System partition
4. Go to BACKUP section and swipe to backup, wait for it to finish
5. Go to WIPE section, select ADVANCED WIPE and select: Cache, Dalvik Cache, Data and System
6. Go to INSTALL section, find the ROM zip and flash it, then flash the audio fix zip then the misc fixes zip.
7. NOTE: After each zip select WIPE CACHES option
8. Flash OpenGApps
10. Flash SuperSU if you desire, but you don't have to
11. Go to REBOOT section and select SYSTEM
12. Done!
DOWNLOADS​
ROM: https://mega.nz/#!kkc3yJKB!I1sGNjgSKkBnNTEp069ScjU2d82XcsmaTufReyJOK_Q
Incall Audio Fix:https://mega.nz/#!hs9CFYLK!3DyTZX2yrnP_irZlJvPed8pPOmze82vI3n3JdbbRw0M
Other Misc Fixes: https://mega.nz/#!cglhgaDS!CUEz7QSfUjJvji3d3QrtlWJ-ikYrCSLeKDUCk14jFBE
GApps: opengapps.org
USEFUL LINKS​
Kernel source for everyone interested: https://github.com/LineageOS/android_kernel_samsung_exynos7420
Telegram group: https://telegram.me/joinchat/CaccS0A5Th5ZJmn7IOn3xg
XDA:DevDB Information
LineageOS 13, ROM for the Samsung Galaxy S6
Contributors
xCopyrightPvP, UltraGamerHD
Source Code: https://github.com/UltraGamerHD/android_device_samsung_zero-common
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Marshmallow Firmware
Based On: LineageOS
Version Information
Status: Beta
Created 2017-01-30
Last Updated 2017-04-20

Is there a patch for 920i?

zco385 said:
Is there a patch for 920i?
Click to expand...
Click to collapse
no need patch. working fine in g920i

so if for me mic does work..it will work forever or it is a chance of it stopping working? i make a lot of calls so mic is very important..

brujo55 said:
no need patch. working fine in g920i
Click to expand...
Click to collapse
My phone won't boot 920i. I've got the kernel is not seandroid enforcing and its stuck on samsung galaxy s6. I can revert back to stock but how do I fix that do I need to flash a kernel?

zco385 said:
My phone won't boot 920i. I've got the kernel is not seandroid enforcing and its stuck on samsung galaxy s6. I can revert back to stock but how do I fix that do I need to flash a kernel?
Click to expand...
Click to collapse
Even with g920f.. I flashed UltraGamer's build

Sir_Ambros said:
Even with g920f.. I flashed UltraGamer's build
Click to expand...
Click to collapse
Yeh I'm going to try flashing the other build I'll tell you how I go
---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------
Sir_Ambros said:
Even with g920f.. I flashed UltraGamer's build
Click to expand...
Click to collapse
Other build boots perfectly!

zco385 said:
Yeh I'm going to try flashing the other build I'll tell you how I go
---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------
Other build boots perfectly!
Click to expand...
Click to collapse
I know, I already tried the other build

Fingerprint and camera works ?

Soufiansky said:
Fingerprint and camera works ?
Click to expand...
Click to collapse
Camera works but no fingerprint.

Only G920F ? G925F here!

Thanks guys :highfive:
It looks like @J0SH1X @The Sickness work with your team, so are you all planning on consolidating S6 builds eventually or is it each dev doing their own thing?

Audioboxer said:
Thanks guys :highfive:
It looks like @J0SH1X @The Sickness work with your team, so are you all planning on consolidating S6 builds eventually or is it each dev doing their own thing?
Click to expand...
Click to collapse
Idk mark and ultragamerhd are doing their own thing
Gesendet von meinem LG-H815 mit Tapatalk

J0SH1X said:
Idk mark and ultragamerhd are doing their own thing
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
No problem, just asking as I see you all listed here http://corewell.cf/ :highfive:

Audioboxer said:
No problem, just asking as I see you all listed here http://srv.corewell.cf/ :highfive:
Click to expand...
Click to collapse
Delete that URL please its only Corewell.cf
Gesendet von meinem LG-H815 mit Tapatalk

Just to let you know had to flash the extra boot.img to get the @UltraGamerHD build working. Has booted up now :highfive:
edit: Yay the camera does indeed work!!! Cannot test the quality all that well for now. I do seem to have a home button bug. It won't return the phone back to the home menu. Will mess around.
edit2: Not an issue with the rom. Seems the Gapps package I installed screwed up home button.

Audioboxer said:
Just to let you know had to flash the extra boot.img to get the @UltraGamerHD build working. Has booted up now :highfive:
edit: Yay the camera does indeed work!!! Cannot test the quality all that well for now. I do seem to have a home button bug. It won't return the phone back to the home menu. Will mess around.
edit2: Not an issue with the rom. Seems the Gapps package I installed screwed up home button.
Click to expand...
Click to collapse
That was what I told in the build, that worked for me when I was testing, glad it works

Is the Design-Manager working on UltraGamers build? It isn't on mac's build.

Really stable so far! Only found one major bug, brightness doesn't work (nothing changes with slider). Dunno if it is easy fixed or a sensor problem. Great work devs!
Sent from my SM-G920F using Tapatalk

Guys, I have good news, if everything goes well, very soon, there will be a kernel for G925F

How to install Net Hunter on Honor 6x

Hello friends In this thread I am going to show you how to install Net Hunter on Honor 6X
To do this you need to root your device and make sure you have TWRP installed
Requirements:-
1.A rooted device
2.Twrp installed
3.Net Hunter.zip
To download it goto this link https://build.nethunter.com/nightly/
Then select the top latest folder.And then find nethunter-generic-arm64-kalifs-full-xxxxx.xxxxxxx.zip
Process:-
1.download the zip file to your sdcard
2.boot up to TWRP
3.click on Install zip
4.select the storage at which you have downloaded your file
5.select the file and swipe to install
6.click on reboot device
Note:-1.Ignore the error in red letters then restart you device
2.At first startup it will take a reboot again and it will take upto 1:30 sec to boot into your os
NOW YOU WILL HAVE YOUR NET HUNTER INSTALLED
Important Note:-
Check this thread which will fix all your problems after installation https://goo.gl/ZZGYWJ
Just click thank button which will help me to create new feeds

Is it a rom?

ridershahmir said:
Is it a rom?
Click to expand...
Click to collapse
No it's just a flash file which works on stock emui rom

Marella ram_youtubr said:
No it's just a flash file which works on stock emui rom
Click to expand...
Click to collapse
Still doesn't tell me what it is.

triggerlord said:
Still doesn't tell me what it is.
Click to expand...
Click to collapse
It is an nethunter installation file which you need to flash in TWRP recovery for installation of nethunter

Marella ram_youtubr said:
It is an nethunter installation file which you need to flash in TWRP recovery for installation of nethunter
Click to expand...
Click to collapse
What. Is. Nethunter.

Marella ram_youtubr said:
It is an nethunter installation file which you need to flash in TWRP recovery for installation of nethunter
Click to expand...
Click to collapse
You are supposed to post ROMs in this section. Not an app. It misleads people and ends up wasting 1-2 mins of many who assume it to be a ROM.

niki101 said:
You are supposed to post ROMs in this section. Not an app. It misleads people and ends up wasting 1-2 mins of many who assume it to be a ROM.
Click to expand...
Click to collapse
It's not an app it brings an another os to your phone which is called Kali it is linked to rom

triggerlord said:
What. Is. Nethunter.
Click to expand...
Click to collapse
It is nearly equal to os.It brings complete Linux environment with hacking tools to Android device

Marella ram_youtubr said:
It's not an app it brings an another os to your phone which is called Kali it is linked to rom
Click to expand...
Click to collapse
please post this as introduction to nethunter by editing your first post. Thanks for clarifying!

Disclaimer *sort of
Thanks for this! Don't listen to what other people say.. I'm even thankful that you posted it here..Makes things easier than using Linux Deploy.
Don't criticize others just because you don't know what Kali Linux is.. Don't use criticism to cover up your insolence and ignorance..

does it work with emui 5

Is it possible to install one of the nightly builds? Have a hunch the HID attacks are broken in this one (don't create the hid device on boot).
When I tried to grab the latest nexus 6 one on build.nethunter.com it said that the device wasn't supported. Any way around this?

Dude this is awesome! Never knew it works for our devices. Thanks!
BTW, forget what others are saying here. They're just lazy enough to not google, and let alone understand what Nethunter actually is.

Will it work on redmi 2 with cm13 as base?

Just want to add something:
BACK UP YOUR PHONE
and remove any fingerprint or pin/passwords before installing.

Rupamxx said:
Will it work on redmi 2 with cm13 as base?
Click to expand...
Click to collapse
No

nitheeshas said:
Dude this is awesome! Never knew it works for our devices. Thanks!
BTW, forget what others are saying here. They're just lazy enough to not google, and let alone understand what Nethunter actually is.
Click to expand...
Click to collapse
Thanks for supporting me.
Today i have compiled mac80211 modules and my wifi adapter modules.If you want module for your wifi adapter just specify your wifi adapter name

Rossonero224 said:
does it work with emui 5
Click to expand...
Click to collapse
It works but getting lots of bugs.Recomended not to install

hi there
i need kernel for my phone
or wifi driver to install it via twrp
my phone is huawei gr5 2017
my system is 7.0 nuaget
rooted via supersu.zip
my wifi chipset is 8188
it is mini wifi tp-link
model: tl-wn725n
if you can help me .. please do that .

Xperia T3 Android 7.0

I was searching for Xperia T3 custom ROMs and I didn't find any ROMs for it except for the stock ROM and the other ROM that I found, the guy said it wasn't tested if it was buggy. Also I never found a 7.0 ROM for it but I also found duplicate vids which were fake, because people said it in the comments. Guys will you develop a ROM for it or can I find the stable 6.0 ROM?
Written on the Xperia T3

I could help you getting LineageOS 14.1running. I did It with some help for Xperia E3 (now we are trying to fix camera)
You would need a new device tree repo, old vendor files adapted for Nougat, new kernel on 3.4.X...
Since I don't own this device I can't test so the work is more difficult but I can help you ?

rmnhg said:
I could help you getting LineageOS 14.1running. I did It with some help for Xperia E3 (now we are trying to fix camera)
You would need a new device tree repo, old vendor files adapted for Nougat, new kernel on 3.4.X...
Since I don't own this device I can't test so the work is more difficult but I can help you
Click to expand...
Click to collapse
I think those phones are cheap. Mines unlocked.

SonyXperiaUser14 said:
I think those phones are cheap. Mines unlocked.
Click to expand...
Click to collapse
? What do you mean?

rmnhg said:
? What do you mean?
Click to expand...
Click to collapse
I don't know. I can wait until someone makes a rom for it

Yes, even i searched for custom roms but cudnt find any.. Requesting for a custom rom...
Thnx!!!

ramitjames said:
Yes, even i searched for custom roms but cudnt find any.. Requesting for a custom rom...
Thnx!!!
Click to expand...
Click to collapse
I've started to port kernel on https://github.com/Sony-Yukon/android_kernel_sony_msm8226
And device on https://github.com/Sony-Yukon/android_device_sony_seagull
When I finish kernel, I will be able to build the ROM

rmnhg said:
I've started to port kernel on https://GitHub.com/Sony-Yukon/android_sony_msm8226
And device on https://github.com/Sony-Yukon/android_device_sony_seagull
When I finish kernel, I will be able to build the ROM
Click to expand...
Click to collapse
Awesome!! Thank you...

Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you

rmnhg said:
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
Click to expand...
Click to collapse
Hi. I have a Sony Xperia T3, too. But my version is D5102, not D5103, and almost no one could create the rom for my D5102. Could you help me? Please!
Thanks, Dat.

btdat2506 said:
Hi. I have a Sony Xperia T3, too. But my version is D5102, not D5103, and almost no one could create the rom for my D5102. Could you help me? Please!
Thanks, Dat.
Click to expand...
Click to collapse
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.

rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
My D5102 doesn't have recovery partition so the recovery is placed in the /root. And it doesn't have bootloader update to run newer android version. Do you think is it possible to make my device (D5102) to run a newer androidm?

rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
Here

rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
Is there anything else you need?

btdat2506 said:
Here
Click to expand...
Click to collapse
Ok, that's the info I wanted.
Thank you.
btdat2506 said:
My D5102 doesn't have recovery partition so the recovery is placed in the /root. And it doesn't have bootloader update to run newer android version. Do you think is it possible to make my device (D5102) to run a newer androidm?
Click to expand...
Click to collapse
Thanks for this info too. I have Xperia E3 with two bootloader versions: stock and new one.
We are using stock to run LineageOS 14.1 and it doesn't have recovery support, but it has a partition named FOTAKernel which works as recovery partition. We can use it to store recovery and modify boot.img to launch it after pressing a volume key. We can also store recovery ramdisk on boot.img so we have solutions for this. Don't worry.
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
btdat2506 said:
Is there anything else you need?
Click to expand...
Click to collapse
Right now no, but maybe later I need more.
Thanks for helping

rmnhg said:
Ok, that's the info I wanted.
Thank you.
Thanks for this info too. I have Xperia E3 with two bootloader versions: stock and new one.
We are using stock to run LineageOS 14.1 and it doesn't have recovery support, but it has a partition named FOTAKernel which works as recovery partition. We can use it to store recovery and modify boot.img to launch it after pressing a volume key. We can also store recovery ramdisk on boot.img so we have solutions for this. Don't worry.
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
Right now no, but maybe later I need more.
Thanks for helping
Click to expand...
Click to collapse
Also, i heard from my friend that because my device doesn't receive the bootloader update from sony but the d5103 does. Does this affect to the ability to run newer os?

btdat2506 said:
Also, i heard from my friend that because my device doesn't receive the bootloader update from sony but the d5103 does. Does this affect to the ability to run newer os?
Click to expand...
Click to collapse
I used to think that before but if you configure kernel ok it will boot on stock bootloader.
What I'm doing is to take device tree from all variants from stock kernel to create the new kernel. It should make it work with stock bootloader.

rmnhg said:
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
Click to expand...
Click to collapse
Mine is d5102 as well.
Here are the screenshots.
Thanx.

rmnhg said:
I used to think that before but if you configure kernel ok it will boot on stock bootloader.
What I'm doing is to take device tree from all variants from stock kernel to create the new kernel. It should make it work with stock bootloader.
Click to expand...
Click to collapse
How's it going? Is it ok?

btdat2506 said:
How's it going? Is it ok?
Click to expand...
Click to collapse
I've not ported some drivers yet, this weekend I'll try to finish kernel.
EDIT: I will wait to start Christmas to continue the work because I'm a bit busy these days, I'm sorry.

Development OP9PRO-LEMONADEP-A13-ROM-WATCHDOGS-JUNE 25, 2023

I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE!!!
YOU HAVE BEEN WARNED!!!
Telegram group
I am not accepting donations. Enjoy!!!
WatchDogs
Rom development
t.me
Follow WatchDogs on GitHub or build your own!!
android/README.mkdn at 13.0 · MikeSaya1/android
Build WatchDogs and some general information . Contribute to MikeSaya1/android development by creating an account on GitHub.
github.com
WatchDogs is a ROM I created based on LineageOS & crDroid source & dependencies and I thank them for its use. SafetyNet and CTS passes whether your rooted or not. Modules not required.
Before you begin, if you don't have the latest platform tools installed on your windows machine. Download it here:
DO NOT FLASH GAPPS, THEY ARE INCLUDED IN THE ROM!!!
Flashing Instructions
First time installation (clean flash):
This update requires 13.1.0.500(EX01). Use the firmware listed below
Backup your data
Download the ROM, and firmware flasher listed further down on this post and place all in your platform tools folder,
Extract all the contents in platform tools, Firmware flasher in folder.
You must flash firmware in the bootloader. Boot to recovery and factory reset then adb sideload
adb sideload WatchDogs-13.0-20230625-lemonadep.zip
Reboot to system
reboot to recovery if you want root
adb sideload magisk.apk or adb sideload magisk.zip
Update installation:
TWRP SUPPORTS UPDATES. SIMPLY BOOT TO TWRP AND INSTALL UPDATE.
Updates can be also sideloaded with custom recovery. Updates do not appear in system updater.
Sources:
ROM
Kernel
Downloads:
ROM
FIRMWARE FLASHER
Bugs?
Let me know.

Is there any screenshots? Thank you.

mavi_ay said:
Is there any screenshots? Thank you.
Click to expand...
Click to collapse
To be honest, I just built it and haven't tested it, nor is it flashed on my phone. The build completed successfully on my Linux system so I can only assume it works and performs the functions that I intended it to. I will try it out later, I'm not up to setting my whole phone up again. By then, I'm sure someone will try it, and report back. It's basically a revamped version of crDroid with some modifications. Bluetooth, speaker audio and others.

Flashed and so far so good.no splash IMG though so just wait and it will boot to system.using on f.16 firmware.

gillim74 said:
Flashed and so far so good.no splash IMG though so just wait and it will boot to system.using on f.16 firmware.
Click to expand...
Click to collapse
Yea I realized I have a bootanimation issue. I'm working on it. I plan on pushing another update later today or tomorrow that hopefully solves it.

TheSayaMan said:
Yea I realized I have a bootanimation issue. I'm working on it. I plan on pushing another update later today or tomorrow that hopefully solves it.
Click to expand...
Click to collapse
No worries the rom itself works great so far

gillim74 said:
No worries the rom itself works great so far
Click to expand...
Click to collapse
Thanks for the info, I appreciate it

compared to crydroid is it different in every way or just a copypaste type of situation for the code? love the features in the list. just curious is all.

this.guy.lol said:
compared to crydroid is it different in every way or just a copypaste type of situation for the code? love the features in the list. just curious is all.
Click to expand...
Click to collapse
It's not copy, paste. The build differs in that I made Bluetooth and audio modifications and boot screen along with other things.

TheSayaMan said:
It's not copy, paste. The build differs in that I made Bluetooth and audio modifications and boot screen along with other things.
Click to expand...
Click to collapse
great! ill DL and try it out. gonna try to flash via twrp since its easier to do.

does it have the OOS camera? that is my biggest make or break with roms.

this.guy.lol said:
does it have the OOS camera? that is my biggest make or break with roms.
Click to expand...
Click to collapse
Yes

think it would be cool to add a theme option for dialer like on the older iphones like what cydia tweaks had.

this.guy.lol said:
does it have the OOS camera? that is my biggest make or break with roms.
Click to expand...
Click to collapse
Yes it does

this.guy.lol said:
think it would be cool to add a theme option for dialer like on the older iphones like what cydia tweaks had.
Click to expand...
Click to collapse
I will look into adding it to my gapps build

this.guy.lol said:
great! ill DL and try it out. gonna try to flash via twrp since its easier to do.
Click to expand...
Click to collapse
Let me know. I'm curious. I haven't tested it with twrp. It probably will work but updating ROM with it might be a issue.

TheSayaMan said:
Let me know. I'm curious. I haven't tested it with twrp. It probably will work but updating ROM with it might be a issue.
Click to expand...
Click to collapse
wasnt able to do anything with it. got frustrated so i went back to crydroid. will try this again in the future.

Does this have the oneplus settings? Also, does it have the 5G NSA+SA switch?

jamescable said:
Does this have the oneplus settings? Also, does it have the 5G NSA+SA switch?
Click to expand...
Click to collapse
Yes and no

TheSayaMan said:
Yes and no
Click to expand...
Click to collapse
is the boot animation gonna look like the crdroid one?