My phone says that there's a patch for "Stagefright" available (under "Update Samsung Software"), and that it's been downloaded and verified (58.1 MB). I tap "Restart & install", it says "Rebooting now..." but nothing happens.
Sprint says that the patch is L710SPTBMK5 http://support.sprint.com/support/a...ServiceAdvisory_542_GKB49847-dvc6430001prd#!/
I was thinking of trying to flash it manually, but I couldn't find the file on my phone and haven't found a place to download it from.
Any suggestions?
I thought mk5 was jellybean. But I guess I was wrong. Nj2 was the latest update, until a couple days ago, not sure what the new one is. Oh1 maybe. But is your phone rooted? Custom recovery? Then don't try to install an update zip, it won't work. You can't do it manually even with stock recovery, unless you know how to adb sideload. Better off waiting until the full .tar is posted then using odin to install it.
If you're not rooted it should have installed fine. Try rebooting, if that doesn't work, and you are not rooted, use kies.
Also the update zip is in /cache, but you can only see it if you're rooted.
madbat99 said:
I thought mk5 was jellybean. But I guess I was wrong.
Click to expand...
Click to collapse
You might've been thinking of L710VPUCMK3
madbat99 said:
Nj2 was the latest update, until a couple days ago, not sure what the new one is. Oh1 maybe. But is your phone rooted? Custom recovery?
Click to expand...
Click to collapse
Yes
madbat99 said:
Then don't try to install an update zip, it won't work. You can't do it manually even with stock recovery, unless you know how to adb sideload. Better off waiting until the full .tar is posted then using odin to install it.
Click to expand...
Click to collapse
OK, I'll be patient
madbat99 said:
Also the update zip is in /cache, but you can only see it if you're rooted.
Click to expand...
Click to collapse
Yeah, checked there (and everywhere else I could think of) - nothing.
If it wasn't in cache then it probably didn't download.
If you do download it, it can have the updater script edited to be flashed in twrp. If you know how to edit updater scripts. Its not that hard.
madbat99 said:
If it wasn't in cache then it probably didn't download.
Click to expand...
Click to collapse
That's what I'm thinking too, except the phone says it was - https://goo.gl/photos/9oz9Vw3GmFkPPCGv6
Could it be that it got downloaded, but not saved, because the phone is rooted?
Mk5 is out of sequence, it has to be greater than n
avd said:
Mk5 is out of sequence, it has to be greater than n
Click to expand...
Click to collapse
What are you implying? That the Sprint website is wrong?
Not wrong, just confused.
Is this for the triband? Because mk5 on the standard s3 is indeed jellybean.
has anyone pulled the zip file? L710SPTBMK5?
Related
Hello, my dumb ass decided to root using CFRoot, then it said it failed so I tried to flash the CFAutoRoot in Odin. Well, I tried booting my phone, after saying f*** it, and now I'm greeted with 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' what can I do? I just bought this phone, so if I screwed it up, I'm in trouble.
What phone and what rom is it running?
audit13 said:
What phone and what rom is it running?
Click to expand...
Click to collapse
SGH-I747(AT&T Samsung Galaxy 3), and the stock 4.3 rom
Unfortunately, there is no way to flash a stock AT&T 4.3 ROM to this phone as AT&T never released a full ROM, only an update.
Did you try reconnecting it to Kies to try and re-flash?
audit13 said:
What phone and what rom is it running?
Click to expand...
Click to collapse
audit13 said:
Unfortunately, there is no way to flash a stock AT&T 4.3 ROM to this phone as AT&T never released a full ROM, only an update.
Did you try reconnecting it to Kies to try and re-flash?
Click to expand...
Click to collapse
I'm on 4.3 update I meant, and how can I reflash? I'm in Kies now.
Wesley. said:
I'm on 4.3 update I meant, and how can I reflash? I'm in Kies now.
Click to expand...
Click to collapse
Does Kies detect your phone at all? Is there a recover option? Sorry, I haven't used Kies for a long time so I don't remember what options are available.
Maybe this will help: http://www.samsung.com/us/support/faq/FAQ00052703/61329
audit13 said:
Does Kies detect your phone at all? Is there a recover option? Sorry, I haven't used Kies for a long time so I don't remember what options are available.
Click to expand...
Click to collapse
I went to tools -> Firmware upgrade and initialization, entered my model # & S/N, and it's 'Downloading file for firmware emergency recovery of 'GALAXY S III '(SGH-I747)' from the server...' so it says, which I got to from Kies. Should I let it run its course?
Wesley. said:
I went to tools -> Firmware upgrade and initialization, entered my model # & S/N, and it's 'Downloading file for firmware emergency recovery of 'GALAXY S III '(SGH-I747)' from the server...' so it says, which I got to from Kies. Should I let it run its course?
Click to expand...
Click to collapse
I'm not sure as I have never used this Kies option. I have always re-flashed via Odin. Your case is different because there is no full 4.3 AT&T Rom that can be flashed via Odin.
Is there any warranty on your phone?
audit13 said:
I'm not sure as I have never used this Kies option. I have always re-flashed via Odin. Your case is different because there is no full 4.3 AT&T Rom that can be flashed via Odin.
Is there any warranty on your phone?
Click to expand...
Click to collapse
It says Warranty Bit: 1 on Download mode
Wesley. said:
It says Warranty Bit: 1
Click to expand...
Click to collapse
Looks like you tripped the Knox counter when you tried to root the phone. Did you get it from AT&T? Maybe you could take it back and get it exchanged for another one since it got pooched while running Kies?
audit13 said:
Looks like you tripped the Knox counter when you tried to root the phone. Did you get it from AT&T? Maybe you could take it back and get it exchanged for another one since it got pooched while running Kies?
Click to expand...
Click to collapse
I got it from Walmart because AT&T was going to take two hours, lol. And, how would I go about doing that? I'm not a good liar, and I don't know how I pooched it lol
Wesley. said:
I got it from Walmart because AT&T was going to take two hours, lol. And, how would I go about doing that? I'm not a good liar, and I don't know how I pooched it lol
Click to expand...
Click to collapse
Well, if you take it to an AT&T or Walmart store, they may not care that you tripped the counter. If they send it in to Samsung for repair, they may not care either. However, there's always the chance that AT&T/Walmart/Samsung would allow repairing the phone at no charge.
audit13 said:
Well, if you take it to an AT&T or Walmart store, they may not care that you tripped the counter. If they send it in to Samsung for repair, they may not care either. However, there's always the chance that AT&T/Walmart/Samsung would allow repairing the phone at no charge.
Click to expand...
Click to collapse
Is there any way I could try flashing a rom?
Wesley. said:
Is there any way I could try flashing a rom?
Click to expand...
Click to collapse
You would need to install a custom recovery in order to flash a custom ROM. A custom recovery can be installed via Odin if you find the right file.
Do not flash any stock Samsung 4.3 ROM or a custom rom unless Knox has been removed.
audit13 said:
You would need to install a custom recovery in order to flash a custom ROM. A custom recovery can be installed via Odin if you find the right file.
Do not flash any stock Samsung 4.3 ROM or a custom rom unless Knox has been removed.
Click to expand...
Click to collapse
I have CWM Recovery, what can I do now? I am rooted, however Knox isn't disabled. Any way I can disable it? I'm unable to boot my phone up, when I try it says 'Firmware upgrade encountered an issue. Please select blah blah..', and I'm in the Download mode now.
Wesley. said:
I have CWM Recovery, what can I do now? I am rooted, however Knox isn't disabled. Any way I can disable it? I'm unable to boot my phone up, when I try it says 'Firmware upgrade encountered an issue. Please select blah blah..', and I'm in the Download mode now.
Click to expand...
Click to collapse
Are you running the latest version of CWM? If you can't boot into your OS, how do you know you are rooted?
Flashing another ROM will remove knox.
Copy a custom rom to a microSD card (do not unzip the ROM which is a single zip file), boot into recovery mode, wipe cache, wipe data, wipe Dalvik, and install the ROM from SDcard1.
I have the latest experimental Cyanfox on my i747m from here: http://cyanfox-rom.com/downloads/?folder=d2att/
audit13 said:
Are you running the latest version of CWM? If you can't boot into your OS, how do you know you are rooted?
Flashing another ROM will remove knox.
Copy a custom rom to a microSD card (do not unzip the ROM which is a single zip file), boot into recovery mode, wipe cache, wipe data, wipe Dalvik, and install the ROM from SDcard1.
I have the latest experimental Cyanfox on my i747m from here: http://cyanfox-rom.com/downloads/?folder=d2att/
Click to expand...
Click to collapse
I was able to before, however in Odin I was trying to flash something(a root file), and it said failed, so i rebooted and now i'm stuck. D:
Wesley. said:
I was able to before, however in Odin I was trying to flash something(a root file), and it said failed, so i rebooted and now i'm stuck. D:
Click to expand...
Click to collapse
When did you flash CWM? Is it 6.0.4.5? How did you flash it? Via Odin?
I can't boot into recovery, I get the firmware upgrade thing again. i have no idea what version it is, and yes via odin
Wesley. said:
I can't boot into recovery, I get the firmware upgrade thing again. i have no idea what version it is, and yes via odin
Click to expand...
Click to collapse
For recovery, are you holding the home button, volume up, and then pressing and holding power? You need to hold all 3 until you see some blue text appear on the screen, then let go of the power button.
Hey all, I need some help. I bricked my phone, and I can only get into download mode and recovery. Flashing through odin fails each time, and so does flashing through recovery. Gives me a status 7 error. Ive made sure I'm downloading all the proper files, but Im stumped here. My phone also isnt recognized in Kies. Ive uninstalled and reinstalled the drivers multiple times now. Im too nervous to go to an AT&T store because theyll see I voided my warranty from the recovery (using philz recovery).
Anyone got any clue on what Im doing wrong? Any help would be much appreciated.
Syst3m Deadlock said:
Hey all, I need some help. I bricked my phone, and I can only get into download mode and recovery. Flashing through odin fails each time, and so does flashing through recovery. Gives me a status 7 error. Ive made sure I'm downloading all the proper files, but Im stumped here. My phone also isnt recognized in Kies. Ive uninstalled and reinstalled the drivers multiple times now. Im too nervous to go to an AT&T store because theyll see I voided my warranty from the recovery (using philz recovery).
Anyone got any clue on what Im doing wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
EDIT: In your sig, it says you have an S2? this is the S3 section.
What happened exactly to soft-brick?
The software you're flashing with Odin might not be good, try another one. Also, since you can get in recovery, you can try clean flashing the ROM you had running previous to the brick.
BWolf56 said:
EDIT: In your sig, it says you have an S2? this is the S3 section.
What happened exactly to soft-brick?
The software you're flashing with Odin might not be good, try another one. Also, since you can get in recovery, you can try clean flashing the ROM you had running previous to the brick.
Click to expand...
Click to collapse
I have an S3 now, just havent updated my sig.
And I was trying to root. I was on the latest stock 4.4.2 and flashed the wrong file by mistake. Forgot what it was. So now I cant flash any files in recovery or odin. It just fails each and every time. I know all these files cant be bad
So root wasnt successful and now I cant even revert back to stock
Kies interferes with odin. Uninstall it from your computer and try odin again.
DocHoliday77 said:
Kies interferes with odin. Uninstall it from your computer and try odin again.
Click to expand...
Click to collapse
Still didnt work. Odin let me install a recovery file, but it just wont let me install files to restore back to stock. Same with recovery, I'm still getting the status 7 error. It doesnt make any sense. Ive downloaded and redownloaded from different places, so I highly doubt that all these files are bad
Are you running the latest Philz? Sometimes, the status 7 error occurs with an outdated recovery. Have you tried flashing a custom ROM with TWRP?
audit13 said:
Are you running the latest Philz? Sometimes, the status 7 error occurs with an outdated recovery. Have you tried flashing a custom ROM with TWRP?
Click to expand...
Click to collapse
I'm running 6.0.5 - no I haven't tried TWRP
What rom were you running before? What do you want to be running now?
And what is your current firmware/bootloader version? Not sure about philz recovery, but status 7 errors usually occur when you dont have the required firmware build.
Also, at least for the T999, cm roms updater-scripts are outdated. So if we have the newest available, it still gives the status 7 errors because the new builds haven't been added. Just thought I'd mention this in case you're updated to the new kk firmware and are trying to flash a cm rom.
DocHoliday77 said:
What rom were you running before? What do you want to be running now?
And what is your current firmware/bootloader version? Not sure about philz recovery, but status 7 errors usually occur when you dont have the required firmware build.
Also, at least for the T999, cm roms updater-scripts are outdated. So if we have the newest available, it still gives the status 7 errors because the new builds haven't been added. Just thought I'd mention this in case you're updated to the new kk firmware and are trying to flash a cm rom.
Click to expand...
Click to collapse
I was running official 4.4 unrooted. I'm trying to install Likewise S5.
Install terminal emulator from the play store and enter this:
getprop ro.bootloader
If it returns I747UCUEMJB you should be ok to flash likewise and something else is preventing it. If its anyway but that, you probably need to update your base firmware/bootloaders first.
If you're still unable to boot anything, the build should be shown on the Download Mode screen. You can probably reflash your previous rom and boot to that for right now though.
I was able to get a custom ROM installed, but now I have no reception. Im guessing the bootloader needs to be updated. So I tried updating it via odin. That failed. I also tried flashing it in recovery and still got a status 7 error. Im at my whits end here
You probably need to flash your modem. Run the Terminal Emulator command I posted before, and if it returns I747UCUEMJB, flash the MJB modem. If it returns anything else, flash the modem that matches, but let us know first just to be on the safe side.
DocHoliday77 said:
You probably need to flash your modem. Run the Terminal Emulator command I posted before, and if it returns I747UCUEMJB, flash the MJB modem. If it returns anything else, flash the modem that matches, but let us know first just to be on the safe side.
Click to expand...
Click to collapse
Terminal Emulator tells me my bootloader is 1747UCUFNE4
Syst3m Deadlock said:
Terminal Emulator tells me my bootloader is 1747UCUFNE4
Click to expand...
Click to collapse
So yeah, you need the 1747UCUFNE4 baseband. Look in Settings/About Phone to know which one you have before going and flashing it.
BWolf56 said:
So yeah, you need the 1747UCUFNE4 baseband. Look in Settings/About Phone to know which one you have before going and flashing it.
Click to expand...
Click to collapse
I cant seem to find the 1747UCUFNE4 baseband,
Syst3m Deadlock said:
I cant seem to find the 1747UCUFNE4 baseband,
Click to expand...
Click to collapse
Did you check which one you have atm?
And here, from Doc http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
BWolf56 said:
Did you check which one you have atm?
And here, from Doc http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
Click to expand...
Click to collapse
Thanks a bunch, it worked!!!
Got the update at 2am, posting it so maybe custom roms can get WiFi calling, feel free to mirror just asking you keep them in the thread.
https://docs.google.com/file/d/0B7lAMKoPVdWKU1VfSnRNZS10Zjg/edit?usp=docslist_api
would i be able to just flash this if i wanted to with twrp. just curious.
Android6190 said:
would i be able to just flash this if i wanted to with twrp. just curious.
Click to expand...
Click to collapse
Twrp won't have the decryption keys or some of the HTC specific functions required to apply the OTA. You'll need a stock /system and a stock recovery.
dang. okay
T-Mobile US 4.20.531.4 firmware
Here is the new T-Mobile US firmware from today with the recovery and boot.img removed, just need someone to do their magic and remove red text.
https://dl.dropboxusercontent.com/u/...4/firmware.zip
do we just flash in twrp? Thank you by the way
No it's a stock ota you have to use HTC recovery.
rubyman94 said:
do we just flash in twrp? Thank you by the way
Click to expand...
Click to collapse
Check out my TWRP of a stock no-root ROM (lollipop): https://mega.nz/#F!qsNkyITK!yGJVGKuWOZ_vyndIF8-Z0Q
There are also other files there as well, but remember that if you don't update your firmware you may have issues.
-brad
bradley_e_smith said:
Check out my TWRP of a stock no-root ROM (lollipop): https://mega.nz/#F!qsNkyITK!yGJVGKuWOZ_vyndIF8-Z0Q
There are also other files there as well, but remember that if you don't update your firmware you may have issues.
-brad
Click to expand...
Click to collapse
Umm... your Firmware file is corrupted
Azuske said:
Umm... your Firmware file is corrupted
Click to expand...
Click to collapse
really? it came directly from the OTA.zip file and I was able to extract recovery.img from it.
bradley_e_smith said:
really? it came directly from the OTA.zip file and I was able to extract recovery.img from it.
Click to expand...
Click to collapse
I mean it could be my computer but it keeps saying its corrupted when I download it.
Azuske said:
Umm... your Firmware file is corrupted
Click to expand...
Click to collapse
It's not, it's encrypted.
bradley_e_smith said:
really? it came directly from the OTA.zip file and I was able to extract recovery.img from it.
Click to expand...
Click to collapse
gamer765 said:
It's not, it's encrypted.
Click to expand...
Click to collapse
Oh, well it won't let me put it on my device because the computer thinks it's corrupted
Fenny said:
Twrp won't have the decryption keys or some of the HTC specific functions required to apply the OTA. You'll need a stock /system and a stock recovery.
Click to expand...
Click to collapse
Would this explain the error that I'm getting?
Package expects build fingerprint of htc/tmous/htc_m8:4.4.4/KTU84P/396641.2:user/release-keys or htc/tmous/htc_m8:5.0.1/htc_m8: 5.0.1/LRX22C/464190.4:user/release-keys.; this device has htc/tmous/htc_m8:4.4.3/KTU84L/365360.5/user/release-keys.
I flashed stock recovery, but my phone is still root. Did a full wipe/restore, still getting same thing. The error looks like it's not happy about a missing update perhaps, if I'm reading that correctly. Best I know, I have the latest kitkat version. But, I've had twrp for awhile so maybe I missed an OTA update along the way.
cyclonesworld said:
Would this explain the error that I'm getting?
Package expects build fingerprint of htc/tmous/htc_m8:4.4.4/KTU84P/396641.2:user/release-keys or htc/tmous/htc_m8:5.0.1/htc_m8: 5.0.1/LRX22C/464190.4:user/release-keys.; this device has htc/tmous/htc_m8:4.4.3/KTU84L/365360.5/user/release-keys.
I flashed stock recovery, but my phone is still root. Did a full wipe/restore, still getting same thing. The error looks like it's not happy about a missing update perhaps, if I'm reading that correctly. Best I know, I have the latest kitkat version. But, I've had twrp for awhile so maybe I missed an OTA update along the way.
Click to expand...
Click to collapse
If you're SOFF and supercid just flash the lollipop ruu T-Mobile just release. It doesn't matter what previous rom you're on. Then reflash custom recovery and rooted. I've done this alot of time already.
bradley_e_smith said:
Check out my TWRP of a stock no-root ROM (lollipop): https://mega.nz/#F!qsNkyITK!yGJVGKuWOZ_vyndIF8-Z0Q
There are also other files there as well, but remember that if you don't update your firmware you may have issues.
-brad
Click to expand...
Click to collapse
So the steps would be:
- Flash stock recovery via fastboot
- Flash firmware via fastboot
- Flash twrp via fastboot
- Flash Lollipop via twpr
Is this correct?
rickpref said:
So the steps would be:
- Flash stock recovery via fastboot
- Flash firmware via fastboot
- Flash twrp via fastboot
- Flash Lollipop via twpr
Is this correct?
Click to expand...
Click to collapse
For me (I am s-on) I did it in this order:
- flashed twrp stock rom
- rebooted and made sure the rom worked
- flashed stock recovery via fastboot
- rebooted and downloaded and installed OTA.
If you are s-off I believe (someone correct me if I am wrong) you can use the RUU instead.
I did have a wifi issue which was solved by a factory wipe ( yes I had to re-install and setup the phone again).
-brad
bradley_e_smith said:
For me (I am s-on) I did it in this order:
- flashed twrp stock rom
- rebooted and made sure the rom worked
- flashed stock recovery via fastboot
- rebooted and downloaded and installed OTA.
If you are s-off I believe (someone correct me if I am wrong) you can use the RUU instead.
I did have a wifi issue which was solved by a factory wipe ( yes I had to re-install and setup the phone again).
-brad
Click to expand...
Click to collapse
Wow, that sounds much simpler, thanks...gonna try that now.
Radio
Any chance someone can please post a flashable zip with the new t-mo radio?
Where would I get the stock recovery for this fw and update. I want to root but keep my ota
Just got a small system update on my Sprint S6. Think it was like 29MB. Includes the April 2, 2016 security update. Not much else I can see.
Thanks for posting this. I will keep an eye out for any updated TAR on SAMMOBILE; if there is one I'll copy to Android File Host and post here.
I keep hoping for the apn edit to come back to ##data# section. But its not there
Sent from my SM-G920P using Tapatalk
I did the update and tried to install recovery. It didnt work
weirdfate said:
I did the update and tried to install recovery. It didnt work
Click to expand...
Click to collapse
Unfortunately, you can't install a OTA via twrp you must wait for the official TAR to come out
Should have been more specific. I used Odin to go back to stock then took the update. Then used the recovery tar to get recovery and it didn't work
weirdfate said:
Should have been more specific. I used Odin to go back to stock then took the update. Then used the recovery tar to get recovery and it didn't work
Click to expand...
Click to collapse
Do you have OEM unlock enabled? What's the error in Odin?
Sent from my SM-G920P using Tapatalk
weirdfate said:
Should have been more specific. I used Odin to go back to stock then took the update. Then used the recovery tar to get recovery and it didn't work
Click to expand...
Click to collapse
confirm this: both TWRP 3.0.0-1 and 3.0.2-0 dont work on latest MM build PD2.
Bummer i guess i wont update then im worried about the next time i odin back if it takes the updates during setup. il be shi# of luck if twrp wont install lol.
But the one that works that i do got is new_S6_Spr_TWRP_MM-Bootloader2 have u tried that from 1614s thread
Try this through Odin: https://www.androidfilehost.com/?fid=24499762635999104
koop1955 said:
Try this through Odin: https://www.androidfilehost.com/?fid=24499762635999104
Click to expand...
Click to collapse
Thanks thats the one that ive used few times but i have not took the update and only will when all the developers decide to also.
Guys with no twrp on PD2 let us know if that works with the newest update please and thanks.
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
Is this ok to install on the US variants?
Sent from my iPhone using Tapatalk
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
What version is this from?
hey bro did you have the flashligt icon and gesture in the new update?
Anyone flashed this with flash fire?
How to install on rooted devices???
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
You didn't tell us what variant of the phone you have
How to install???
zimplemeh said:
Is this ok to install on the US variants?
Click to expand...
Click to collapse
No this is not recommended to install on US variant
saqlainrattansi said:
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
Click to expand...
Click to collapse
Yes you got it right
olive23 said:
What version is this from?
Click to expand...
Click to collapse
It's from build number *67
Jayesh Nirve said:
How to install???
Click to expand...
Click to collapse
Either use stock recovery or use Flashfire
zeft64 said:
You didn't tell us what variant of the phone you have
Click to expand...
Click to collapse
Indian Variant
Flash fire ain't working phone just reboots with no changes
can i install on retbr?
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Pls tell me how u went back to 15 plsss
Aredhelelen said:
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Click to expand...
Click to collapse
Exactly what I have been trying to tell. There is a fingerprint mismatch that happens. On a side note how did you manage to take yourself back from .35 to .15 and then update to .67. I get the last part, but downgrading with a higher bootloader; and where did you get the .15 build
You can simply install one of the stock versions already posted here in the forum, I just downloaded the .15 and installed it again via fastboot with the command lines (also explained in that post, in comments) like any other stock rom. Then, after starting the phone you must activate USB debbuging mode to be able to use ADB commands, so you can restart the phone in stock recovery and activate the push ota update via ADB.
Anyway, if this sounds complicated I think there is already a flashable .zip to apply ota, you can give it a try.