Mac & LG Micro SD Woes! Sandisk Showing 200mb instead of 128GB - G4 Q&A, Help & Troubleshooting

Since I took my SD out of my Moto G and put it in my new LG G4 it erased everything and has only shown up 200mb. I formatted it using the phone and the same result. I formatted it using my mac in various ways such as FAT, EXFAT, GUID Partition, Masterboot Partition. Same result. I overwrote and formatted it using LG recommended SD formatter 4 on mac. It was unreadable so the phone needed to format it again. Same result. And this is coming from having two terrible lexar SDs that corrupted and needed reformatting every few weeks. I actually want to eat my SD card. What can i do?
Hope you can help,
Thanks

plug it in a cardreader and repartition it with gparted or diskpart

Gparted seems too complicated to use on mac and diskpart is pc only I think. On my mac its now showing as 24.79gb. Its only a month or two old and seems completely screwed up.

Related

SD Card Partition Lost

After successfully rooting my Evo I decided to partition my SD Card, I had a 16gb SDHC class 2 card, after the somewhat successful partition, I now have a 1.98gb SDHC class 2 card
I used Acronis to partition the SD card and, for all intents and purposes it seemed to have worked, but then my pc stopped recognising the sd card as did Arconis, when I switched to disk drive on the phone. I took it to work and the work pc did recognize it but Arconis still doesnt. Any one have any ideas how to get my partition back, I have tried several different so called Partition Recovery Software programs, none of them have been able to detect the missing partition.
Can anyone help? Any help is appreciated
ok, so I got one of the issues resolved, I had forgotten to add a drive letter to the SD Card, thats why my pc was not able to see it. however the missing partition is still a problem

[Q] Mac Formatting of SD Card Renders the Card Unavailable

I apologize if this has been covered but I tried a couple of searches of the forums and google and didn't get a definitive answer.
I was researching rooting, updating the ratio and installing froyo on my Incredible and started to gather up the files and test my setup. I ran into a problem before anything really got off the ground. In order to complete the above process correctly the SD card should be formatted in FAT32 so I hooked my incredible up to my mac and formated using disk utility. Once I format the sd card with my mac the incredible lists the sd card as unavailable under >settings>sd card and storage. I have also tried the newfs_msdos utility from the terminal and again no luck. I am hoping that someone with a deeper understanding can point me in a direction other than find a pc.
Thanks
KCRoach
kcroach said:
I apologize if this has been covered but I tried a couple of searches of the forums and google and didn't get a definitive answer.
I was researching rooting, updating the ratio and installing froyo on my Incredible and started to gather up the files and test my setup. I ran into a problem before anything really got off the ground. In order to complete the above process correctly the SD card should be formatted in FAT32 so I hooked my incredible up to my mac and formated using disk utility. Once I format the sd card with my mac the incredible lists the sd card as unavailable under >settings>sd card and storage. I have also tried the newfs_msdos utility from the terminal and again no luck. I am hoping that someone with a deeper understanding can point me in a direction other than find a pc.
Thanks
KCRoach
Click to expand...
Click to collapse
When you selected format did you choose FAT32? MAC use a Unix (journal file System) format by default.
It is much better to power down the phone pull the SDCard and place it in the the computer for formatting, the Incredible has 2 memory locations 1 8GB internal (non-removable) and the SDCard that you an remove, when you connect to a MAC both memory locations will be displayed.
You very lucky you did not format the the internal location.
Hope this helps
Try formatting it via the phone. Settings - phone storage - format SD card. You can do that in every Rom but cyanogen.
Sent from my ADR6300 using XDA App
couple weeks ago i played around with disk utility on my mac too and my card stopped being recognized, it finally took me turning the phone off, popping the card out, and pushing it back in and it came right up. might give it a try.
Ruben1123 said:
Try formatting it via the phone. Settings - phone storage - format SD card. You can do that in every Rom but cyanogen.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Yes. This. I have a mac and I formatted my sdcard using disk utility to FAT32 and I have had no problems, but just format from the phone.
Are getting a 200mb partition and that's it or is it completely unrecognizable. Formatting it through the phone is the only way I've found to get rid of to clear that partition.
Sent from my ADR6300 using Tapatalk
oldman_58 said:
When you selected format did you choose FAT32? MAC use a Unix (journal file System) format by default.
It is much better to power down the phone pull the SDCard and place it in the the computer for formatting, the Incredible has 2 memory locations 1 8GB internal (non-removable) and the SDCard that you an remove, when you connect to a MAC both memory locations will be displayed.
You very lucky you did not format the the internal location.
Hope this helps
Click to expand...
Click to collapse
I formated to the "MS-DOS" option using both utilities. The disk utility defaults to FAT32 and the other utility was specified as FAT32. The result is that after formatting the disk utility says that the device format is mac OS extended (journaled) and the volume is MS-Dos FAT32. I have tried both utilities while the sd card in the phone and the phone is connected and while the sd card is directly in a reader. I believe that while the sd card was in the reader, I may not have gotten the mac os extended formatting in the device but it still wasn't recognized by the phone.
I have formatted the card several times with the phone, to make it readable again after formatting with my mac. Unfortunately, I still have the stock 2.1 that the phone was shipped with and that formats the sd card to FAT16 not FAT32. I assume that if I buy are larger sd card the phone may bump it up to FAT32 but am just puzzled by the inability of phone to read the mac formatting of FAT32.
I have also tried turning the phone off and on after reinserting the sd card.
So, I guess, is there a way to force the phone to format into FAT32 rather than FAT16 from the settings.
Thanks
KCRoach
Download a utility called hirens boot cd. Burn the image and boot from it on a cd rom.this should give you a windows xp environment to properly format with among many other useful tools. I'm sure there is an easier way but I'm not that familiar with mac.
Hope this helps
Sent from my ADR6300 using Tapatalk

[Q] Ext3 on 16gb SD Card

Hello.
I have bought a new SD Card (kingston 16gb Class4).
I had a lot of problems with ext3 make. By Gparted it have errors.
I have readed this topic.
Can I repair my SD Card?
Sry for my english.
How are you connecting the card? Via a card reader or still in the phone? If it's still in the phone make sure you are in recovery and not booted in to android.
I made it by card reader. Formatting and partitioning by recovery - errors.
Have you tried erasing all the partitions and creating them again? What happens if you click the 'Repair' button?
I've always done my partitioning with my card in the phone, connected to my PC while in recovery and used Minitool Partition Wizard for Windows (this software was suggested in a thread I read a while ago) and never had any problems.
There is also the possibility of the card having a hardware problem, so you might need to swap it under warranty.
yes, first i have erased all partitions (deleted)
On repair ext - error, fat32 works fine.
first make an extended partition for your fat32 and inside that a primary fat32.
The unallocated space make it ext3
snowboard said:
first make an extended partition for your fat32 and inside that a primary fat32.
The unallocated space make it ext3
Click to expand...
Click to collapse
shouldn't both partitions be primary (no extended ones)?
erase everything 1st keep it unformatted then create fat32 primary then ext primary (optional linuxs swap) this is what i have done when installed miui rom data2ext
i suggest you dont use that card reader try through the cell....
I have tried a lot of methods - ext still no works.
Sent from my HTC Desire using XDA App
Where did you get the card from?
Stupid question but two of my friends bought cheap (fake) cards from eBay and both had problems with them, either the card kept losing data or they go errors loading from the card due to the poor quality. In which case you need to spend a little more and get a proper card from amazon on a high street retailer.
If not then as suggested use try formatting and partitioning the card through the recovery on your phone, most of the up-to-date recoveries can do this and it's the easiest way to get the card ass needed for a2sd etc. if it still doesn't work then take the card back it's probably faulty.
I bought this card too and even though I had no issues formatting the card I do have speed issues with it. I've been in contact with Kingston and they're looking into it. My writing speed is 1.6Mb/s....
But now a tip for you, I couldn't use Gparted since it's Live CD wont start my monitors. So I downloaded Easeus Partition Master. Very easy to use and it worked perfect.
Start with your Fat32 partition and then your Ext partition.
You can find the program here: http://download.cnet.com/Easeus-Partition-Master-Home-Edition/3000-2248_4-10863346.html
Sent from my HTC Desire using XDA App

Help, my 16gb card shows as 1gb after a crash in a middle of partitioning with gpart

Hello,
My rom(iNsertCoin) has crashed today for an unknown reason, and entered nonstop bootloops.
I have tried to reflash the iNsertcoin zip but it didnt work for some reason, also it told me it cant mount the sd-ext (I am using ra-desire 2.0.0).
I have turned the phone off, and when I returned home I put my A-Data 16gb Class 10 Microsd (which was bought from newegg, so it cant be fake) in my card reader, and I started to partition the card like this: 1gb ext4, 300mb ext4, 100mb linux-swap, rest to fat32.
all of a sudden the program just crashed and from that point it tells me the card has 1gb unallocated space, in windows 7 it keeps asking me to format the card but it never succeeds, and it says the card uses raw file system.
I have tried chkdsk, and it told me its not available for raw filesystems.
I have also tried a number of programs, the HP partition tool, SDFormatter, nothing really helped.
Also, I tried using diskpart -> clean all command on the card but it keeps giving me weird error messages but usually it tells me its not ready, and it looks like the card is not responsive, although the pc recongized it.
I have tried doing this from a number of computers, another W7 computer and a XP computer. nothing worked.
I cant allocate space in gparted, and it tells me to create a partition table, and when I try that, the program just hangs.
Oh yeah, and I tried to put the microsd card into an adapter and put it in my dad's dslr and tried to format it, but there was an error.
Have I killed my microsd card? :/
hfg666 said:
Hello,
My rom(iNsertCoin) has crashed today for an unknown reason, and entered nonstop bootloops.
I have tried to reflash the iNsertcoin zip but it didnt work for some reason, also it told me it cant mount the sd-ext (I am using ra-desire 2.0.0).
I have turned the phone off, and when I returned home I put my A-Data 16gb Class 10 Microsd (which was bought from newegg, so it cant be fake) in my card reader, and I started to partition the card like this: 1gb ext4, 300mb ext4, 100mb linux-swap, rest to fat32.
all of a sudden the program just crashed and from that point it tells me the card has 1gb unallocated space, in windows 7 it keeps asking me to format the card but it never succeeds, and it says the card uses raw file system.
I have tried chkdsk, and it told me its not available for raw filesystems.
I have also tried a number of programs, the HP partition tool, SDFormatter, nothing really helped.
Also, I tried using diskpart -> clean all command on the card but it keeps giving me weird error messages but usually it tells me its not ready, and it looks like the card is not responsive, although the pc recongized it.
I have tried doing this from a number of computers, another W7 computer and a XP computer. nothing worked.
I cant allocate space in gparted, and it tells me to create a partition table, and when I try that, the program just hangs.
Oh yeah, and I tried to put the microsd card into an adapter and put it in my dad's dslr and tried to format it, but there was an error.
Have I killed my microsd card? :/
Click to expand...
Click to collapse
try using androids built in sd card format tool. settigns, sd card storage, unmount sd card, then format. try flashing clockworkmod recovery and using there builtin format ooptions,, if still no go, u mayb have friemd your sd card. by the way, u sjould always use your fat32 as your 1st rive and never 2nd or 3rd. im quite sure u makes your pc read the drives in the order u created them.
LINKSLOVESANDROID said:
try using androids built in sd card format tool. settigns, sd card storage, unmount sd card, then format. try flashing clockworkmod recovery and using there builtin format ooptions,, if still no go, u mayb have friemd your sd card. by the way, u sjould always use your fat32 as your 1st rive and never 2nd or 3rd. im quite sure u makes your pc read the drives in the order u created them.
Click to expand...
Click to collapse
Thanks, but I have already tried to format it from the phone, and then recovery. didnt work.
and i made my fat32 as my first drive i just listed it last..
well I have sent it to A-Data today, in taiwan, and I'm hoping I will get a replacement card soon.

micro sd card problem

I'm having a problem with this brand new 32GB kingston canvas select micro sd card. Bought it for my dad, he's using a 100% stock G5. When first plugged in, the phone asked if the card was going to be used for internal or external storage, chose internal because my dad is kind of an app maniac (yeah, I know, tried to get him to stop but he's stubborn), formatting stopped at 30% for 10 minutes. Rebooted the phone, it stopped recognizing the sd card. Tried it on my phone, which is also using a 32GB kingston sd, and it didn't recognize it either, on the PC it works fine. Tried formatting it to every file system known to man and none of the phones will even know there's an sd card plugged in when using that particular sd card, but both will work fine with other cards. Could someone give me a hand with this?
I would use minitool (windows) or gparted (Linux)
Delete all partitions on sdcard
Create a new fat32 primary partition and format it
TheFixItMan said:
I would use minitool (windows) or gparted (Linux)
Delete all partitions on sdcard
Create a new fat32 primary partition and format it
Click to expand...
Click to collapse
thanks for the suggestion, but it didn't work. it's as if the micro sd isn't even inserted into the phone, yet on pc it works perfectly. it even passed hw2test!
kadorna1 said:
thanks for the suggestion, but it didn't work. it's as if the micro sd isn't even inserted into the phone, yet on pc it works perfectly. it even passed hw2test!
Click to expand...
Click to collapse
Other than factory resetting the phone or trying a different sd card there's nothing else you can do

Categories

Resources