Develop Bugs

[SOLVED] Hard-bricked Nexus 7 2013

Hi, I have tried to root new Nexus 7, but seems bricked it.
Now I can't turn it on. I see "Qualcomm HS-USB QDLoader 9008 (COM 15)" in the devices list when tablet connected to the PC.
My steps to brick:
1. Unlock bootloader
2. Flash TWRP
3. Boot to the bootloader using "adb reboot bootloader"
4. Select "Recovery Mode"
After this step I had android logo with red triangle. I have tried to exit this mode and pressed Up + Power for few seconds.
That's all.
Are there ant ways to resolve this issue?
I'm not in the USA and not sure that our service centers can help me in the nearest future. No warranty, tablet was bought from the private person, not in the shop.
I'm programmer and know what is soldering, so any solutions are acceptable.
Solution:
swagstr said:
Try holding power only for a minute. Then try again.
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=2220775

I think with past devices when you get the qualcomm loader device it means either the bootloader is corrupted or the raw partitions are corrupted.
You can probably recover, but it would take some effort to figure out specifics.
I think I remember you can use qpst to do some diagnosis.

Maybe try flashing the factory images
They are located here:
https://developers.google.com/android/nexus/images#razor

SplicedX said:
Maybe try flashing the factory images
Click to expand...
Click to collapse
I can't. My bootloader is broken, I need to restore it first.
Will try to play with QPST.

Okay. One step at a time. Use Vol Down + Power to attempt to get to bootloader. What happens?
Sent from my Nexus 7 using Tapatalk 4

swagstr said:
Okay. One step at a time. Use Vol Down + Power to attempt to get to bootloader. What happens?
Click to expand...
Click to collapse
Tablet not connected to the PC - nothing, screen is black.
Tablet connected to the PC - nothing, screen is black, no changes in the device manager.
I have tried both cases - Vol Down first, Power next; Powewr first, Vol Down next; both buttons at one time.

pls help me, i just received mine today, did nothing, only configured google account, google account just started download few apps and system updated once. then when i check "about phone" it restarted or crashed itself, and now i can't pass through flashing X logo. I tried volume down+power i can get in bootloader mode, but unable to use recovery mode, says no command. How to recover or factory reset it? somebody help me

Thanks for posting reply. Try holding power only for a minute. Then try again.
Sent from my Nexus 7 using Tapatalk 4

swagstr said:
Thanks for posting reply. Try holding power only for a minute. Then try again.
Click to expand...
Click to collapse
You are genius!
It is fully working.

ViSoR42 said:
You are genius!
It is fully working.
Click to expand...
Click to collapse
Excellent. Glad it worked.
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 12:44 PM ---------- Previous post was at 12:29 PM ----------
I switch the title of your thread and add [SOLVED] for people of the future.
Sent from my Nexus 4 using Tapatalk 4 Beta

Help!
swagstr said:
Excellent. Glad it worked.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I'm having the same problem. Neither of those solutions worked. Any ideas?

ViSoR42 said:
Hi, I have tried to root new Nexus 7, but seems bricked it.
Now I can't turn it on. I see "Qualcomm HS-USB QDLoader 9008 (COM 15)" in the devices list when tablet connected to the PC.
My steps to brick:
1. Unlock bootloader
2. Flash TWRP
3. Boot to the bootloader using "adb reboot bootloader"
4. Select "Recovery Mode"
After this step I had android logo with red triangle. I have tried to exit this mode and pressed Up + Power for few seconds.
That's all.
Are there ant ways to resolve this issue?
I'm not in the USA and not sure that our service centers can help me in the nearest future. No warranty, tablet was bought from the private person, not in the shop.
I'm programmer and know what is soldering, so any solutions are acceptable.
Solution:
Click to expand...
Click to collapse
Hi ViSoR42,
I'm a newbie. I had problem somehow the same as yours.
When I was using Nexus 7 2013, it hang up. I press and hold Power button to shut it down. It went down. Then I cant not turn it up.
Nothing happened when I tried to turn it up.
I connected it to the computer. It appeared "Qualcomm HS-USB QDLoader 9008" as well.
I think I can not do anything, for example, "adb", "fastboot", ...
You said that the way of swagstr worked for you. I have tried but failed.
Could you please tell me exactly what you did step by step?
Thanks a heap!
Tu.

tund6789 said:
Hi ViSoR42,
I'm a newbie. I had problem somehow the same as yours.
When I was using Nexus 7 2013, it hang up. I press and hold Power button to shut it down. It went down. Then I cant not turn it up.
Nothing happened when I tried to turn it up.
I connected it to the computer. It appeared "Qualcomm HS-USB QDLoader 9008" as well.
I think I can not do anything, for example, "adb", "fastboot", ...
You said that the way of swagstr worked for you. I have tried but failed.
Could you please tell me exactly what you did step by step?
Thanks a heap!
Tu.
Click to expand...
Click to collapse
its like watching a good 2 hour long show that gets the last half hour cut by a breaking news report just to come back to the rolling of the credits and the 10 o clock news starting off with the breaking news report when you were watching a recorded show on your dvr

It worked for me too.
Why must it be depressed for a minute? what is the secret?

ViSoR42 said:
You are genius!
It is fully working.
Click to expand...
Click to collapse
Sorry for the really late reply, but since this happened to me and I fixed it this way; has it ever happened again ever since?

LittleConfucy said:
Sorry for the really late reply, but since this happened to me and I fixed it this way; has it ever happened again ever since?
Click to expand...
Click to collapse
It was only one time issue for me. But I'm not rooting my tablet every day

mrsnaa said:
pls help me, i just received mine today, did nothing, only configured google account, google account just started download few apps and system updated once. then when i check "about phone" it restarted or crashed itself, and now i can't pass through flashing X logo. I tried volume down+power i can get in bootloader mode, but unable to use recovery mode, says no command. How to recover or factory reset it? somebody help me
Click to expand...
Click to collapse
https://support.google.com/nexus/answer/4596836?hl=en
What you have is normal. You have to go one step more to get to recovery. I've tried to insert a picture, but Tapatalk keeps crashing when I try. Must be L 5.0.1.
Whoa! I did not realize how old this post was. Maybe the hold power button worked for this one, too.
Sent from my Nexus 7 using Tapatalk

swagstr said:
Thanks for posting reply. Try holding power only for a minute. Then try again.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
This did not work for me. I have tried it while it is plugged into the PC, plugged into a charger or not plugged in. While plugged into the PC the "Qualcomm HS-USB QDLoader 9008" device on COM3 disappears periodically and then comes back so I can tell there is some life in it. This is extremely frustrating. The device froze while inside a game. The last image rendered stuck on the image for about 15 minutes until I did a hard reset by holding power down and the power button. The device has never turned back on since.
The only thing that happens is I get the device as a Qualcomm QDLoader when I plug it into a PC.
Please help and thank you in advance!

have you solved it?
codahq said:
This did not work for me. I have tried it while it is plugged into the PC, plugged into a charger or not plugged in. While plugged into the PC the "Qualcomm HS-USB QDLoader 9008" device on COM3 disappears periodically and then comes back so I can tell there is some life in it. This is extremely frustrating. The device froze while inside a game. The last image rendered stuck on the image for about 15 minutes until I did a hard reset by holding power down and the power button. The device has never turned back on since.
The only thing that happens is I get the device as a Qualcomm QDLoader when I plug it into a PC.
Please help and thank you in advance!
Click to expand...
Click to collapse
i've got the same problem, how did you fixed it? i can't get to the recovery mode. only when i plug it to the computer shows this "Qualcomm HS-USB QDLoader 9008" device on COM3.
please help

[Q] Boot loop: Can't enter Firmware Upgrade mode

I'm posting a question as I've spent days searching with no luck.
I have an LG G3 that while in normal use got very hot and turned off. Now it gets stuck at the LG logo and doesn't boot. I tried a normal factory reset but this just goes back to the LG logo and nothing happens.
So I'm trying to get into the download mode "Firmware Upgrade" screen to flash the stock rom. I hold down volume Up, and plug in the USB and it gets to the little "Download Mode" icon but does not continue to "Firmware Upgrade" and the computer (I've tried 3 different systems) wont recognize the phone.
Interestingly at some point while being in download mode it switched to fastboot, I have no idea how this happened but I was able to run commands on the phone using fastboot.exe, however I have not been able to get back to fastboot since.
Also I'd really like to be able to recover the data on the phone.
Any help would be appreciated.

Grymyrk said:
I'm posting a question as I've spent days searching with no luck.
I have an LG G3 that while in normal use got very hot and turned off. Now it gets stuck at the LG logo and doesn't boot. I tried a normal factory reset but this just goes back to the LG logo and nothing happens.
So I'm trying to get into the download mode "Firmware Upgrade" screen to flash the stock rom. I hold down volume Up, and plug in the USB and it gets to the little "Download Mode" icon but does not continue to "Firmware Upgrade" and the computer (I've tried 3 different systems) wont recognize the phone.
Interestingly at some point while being in download mode it switched to fastboot, I have no idea how this happened but I was able to run commands on the phone using fastboot.exe, however I have not been able to get back to fastboot since.
Also I'd really like to be able to recover the data on the phone.
Any help would be appreciated.
Click to expand...
Click to collapse
do you installed latest official lg drivers for your phone and if you have old drivers installed then uninstall these und install the newer and then reboot your computer.
maybe this help.

dusu84 said:
do you installed latest official lg drivers for your phone and if you have old drivers installed then uninstall these und install the newer and then reboot your computer.
maybe this help.
Click to expand...
Click to collapse
Thanks I tried the drivers you've provided but still no luck. The computer won't detect the phone at all, it doesn't attempt to install drivers nor does the phone show up as a generic device.

Grymyrk said:
Thanks I tried the drivers you've provided but still no luck. The computer won't detect the phone at all, it doesn't attempt to install drivers nor does the phone show up as a generic device.
Click to expand...
Click to collapse
maybe anyone can help you but i read in a german forum of someone with about the same problem... the the device reboots stuck at the lg logo and it wont recognize by the computer.
after all the repair service said it was a hardware defect!

dusu84 said:
maybe anyone can help you but i read in a german forum of someone with about the same problem... the the device reboots stuck at the lg logo and it wont recognize by the computer.
after all the repair service said it was a hardware defect!
Click to expand...
Click to collapse
I hope not, this phone was purchased in Media Markt in Germany and it's not covered by warranty here. LG Australia said it would cost up to $260 for them to fix it and the phone could possibly be downgraded if the mainboard needs to be replaced. I don't know if it would be possible to claim the German warranty.

dusu84 said:
maybe anyone can help you but i read in a german forum of someone with about the same problem... the the device reboots stuck at the lg logo and it wont recognize by the computer.
after all the repair service said it was a hardware defect!
Click to expand...
Click to collapse
Hello!!! I need some help I have an LG L65 D280N, and of nothing it turned on and open a pink screen whith a dbi err fatal!!! I tried too flash it with the costum firmware and everything but the problem is that when i tried to enter the firmware update mode the phone just won't enter it!!! I push the volume up wait 3 seconds and connect the usb cable to enter in firmware mode and the starts to vibrate like he is starting, but doesn't do anything, vibrates sometimes and after a wile it starts but enters in the dbi err fatal screen!!! I did some research and I reboot the PC because of the Driver installing, didn't work, I installed another driver and reboot the PC and it still doesn't work!!! I did a lot of research and I can't enter the firmware update mode!!! Please help me!!!

Htc desire 320 rebooting bootloop (no recovery, no OS, no bootloader)

hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.

mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.

Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?

Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.

Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace

mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.

mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...

n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.

mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.

n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.

This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.

Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )

Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.

mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?

Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over

I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.

Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk

cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro

cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone

Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip

Unbricking nokia xl??

Can anybody please help?? My nokia xl is rooted so I tried flashing twrp recovery mode on my device. But after flashing, it went into recovery mode(or it was supposed to), the problem after that the phone doesn't turn on. If the power button is pressed for long it vibrates only once, then after pressing again it won't do anything. But if take out the battery and put it do the same thing it vibrates but doesn't show anything. So please can anybody help me with legit nokia xl unbricking process??

Have you fixed it yet?

try this tuto
https://forum.xda-developers.com/nokia-x/general/tutorial-how-to-revive-dead-nokia-x-t3000903
or this one
https://forum.xda-developers.com/nokia-x/general/fix-blank-screen-boot-format-sysboot-t3126617

The first tut has been reported and removed and I tried the second one And my Nokia x didn't get detected in ubuntu. But on windows it always gets detected as Qualcomm hsusb 9008

dallastyle said:
The first tut has been reported and removed and I tried the second one And my Nokia x didn't get detected in ubuntu. But on windows it always gets detected as Qualcomm hsusb 9008
Click to expand...
Click to collapse
i don't have any method on windows but i have win 10 and i have upbuntu commend i don't know if it will work if you try it
but if you want to repair your phone test it you won't loss any think

unbrick oneplus 5t, stuck in waiting for device in msmDownloadTool

Hi Guys,
Yesterday during an official update of my oneplus 5t (using the update manager from the phone itself), the phone got bricked and i dont know why....
So after some research i found it is hard bricked ( basically i cant do nothing, power on i cant, power +volume UP/DOWN too, and even when i plug the charge cable i have neither vibrations nor LED on)
So i follow this tutorial to unbrick the phone:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
I could get the phone recognize by the PC by pressing UP to see the phone as QUSB-BULK and then QUALCOMM QD LOADER after driver's update.
But when i run MSMDownloadTool ( V4.0.27 dumpling 43_0.36_180613) as administrator and click on start, the process get stuck in "waiting for device"
the status of connection before click on start was "connected" and after click and some process it turn to N/A
the status of communication is "memory size....."
status of last communication is "waiting for device"
I have tried several time and always the same result..... stuck in the waiting device
does someone have an idea on how to solve this? because i really need to unbrick the phone....
thank you in advance
EDIT:
I tried another version of MsmDownloadTool (dumpling_43_O.06_171206) and this time, the downloading of cache image failed....
I dont know what to do

You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?

DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.

rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.

DaRk-L0rD said:
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.
Click to expand...
Click to collapse
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.

rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
rokusho32 said:
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.
Click to expand...
Click to collapse
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know

DaRk-L0rD said:
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know
Click to expand...
Click to collapse
I have installed the ADB drivers
which version of MSMDownloadTool should i use?

DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.

rcbjr2 said:
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.
Click to expand...
Click to collapse
I have same situation.. did you resolve this problem?

piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
I contacted OnePlus and I sent them the phone and they reinstalled the operating system. I was never able to fix it myself. I even had an online session with OnePlus and they couldn't get the MSM software to recognize the phone (even though it was truly connected to my laptop). I also had an issue with my OnePlus 8T that got messed up doing something with Magisk, and OnePlus reinstalled the operating system as well. I still can't boot from the A partition though; just the B partition.

piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
At first, I chose WWAN-DHCP - which caused problem with connection

piechu11 said:
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
View attachment 5511425
At first, I chose WWAN-DHCP - which caused problem with connection
Click to expand...
Click to collapse
Thank you this solved my problem exactly.
i was restoring my metro by tmobile oneplus nord n10 BE2025 model with build tag BE88CF