Related
I came across Benson Leung's blog posts for USB Type C cables that pass muster, preferably USB IF Certified. He's an engineer with Google. There are about a hundred or so "compliant" cables but there are probably hundreds more that are not, tons are on Amazon and at Best Buy. One quick thing to look for that good cables have is a solid pin , there is no vertical seam down the middle of the pin that plugs into the phones charging port.
Benson's list on Amazon
https://www.amazon.com/gp/aw/ls/ref=pdp_new_wl?lid=KF89JCHI0KT4
A list of compliant cables
https://usbccompliant.com/
Reddit discussions
https://www.google.com/amp/s/amp.re...ogle_spreadsheet_for_usbc_cables_with_benson/
When a cheap cable fried his pricey hardware
http://www.androidpolice.com/2016/0...ous-on-paper-it-allegedly-fried-his-hardware/
Thanks, this is very useful, I'm surprised spigen is not approved them products never failed me.
I use both the iOrange-E and Anker Powerline...didn't even read this list before I purchased them.
I do use Anker's Micro-B to C Adapters though and haven't had any issues.
this is so annoying. so I've gotten two USB c adapter he recommended so I can use one with my Samsung charger, which I assume will work no problem. and one ill use in car. but my car chargers are old, and i think quick charge 2.0. so if I use the adapter, will it blow my phone up?? I have no idea. lol ugh. so annoying.
Sent from my Samsung Galaxy S7 using Tapatalk
Currently I am using this one and it works.
USB 2.0C. Nothing fancy.
https://www.bhphotovideo.com/c/product/1250345-REG/digipower_sp_ac1_usb_2_0_type_c_male.html
Robert235 said:
Thanks, this is very useful, I'm surprised spigen is not approved them products never failed me.
Click to expand...
Click to collapse
There is a Spigen cable on Benson's Amazon list which I linked in the original post.
I'm using Aukey USB A 3.0 to USB C cables with no issues(same ones I used on my Note 7). Got a 5 pack for $20 on Amazon
nest75068 said:
I'm using Aukey USB A 3.0 to USB C cables with no issues(same ones I used on my Note 7). Got a 5 pack for $20 on Amazon
Click to expand...
Click to collapse
You should check to see if they are Benson's list for compliance. He forced them to issue a recall for one of their products. I'm returning an Aukey 3.0 charging station today that is overheating badly while the 2.0 charging station I have from them runs fine.
porscheoscar said:
You should check to see if they are Benson's list for compliance. He forced them to issue a recall for one of their products. I'm returning an Aukey 3.0 charging station today that is overheating badly while the 2.0 charging station I have from them runs fine.
Click to expand...
Click to collapse
He caused Anker to do a recall. Aukey is a different company. If my Aukey cables were going to show an issue, it would have been when I used them for the Note 7 lol
nest75068 said:
He caused Anker to do a recall. Aukey is a different company. If my Aukey cables were going to show an issue, it would have been when I used them for the Note 7 lol
Click to expand...
Click to collapse
Correct I was thinking about this Aukey charger, my mistake. They laid into Aukey hard core. obviously both companies have put out some inferior products with regard to Type C USB standards. we cant give them blank check on brand name...yet.
https://plus.google.com/+BensonLeung/posts/cSXovGvpDvz
Heads up, I picked up a couple of cables from Benson's list. One iOrange-E and one WolfBlitz.
Unfortunately the WolfBlitz does not appear to support Quick Charge 3.0. I'm getting a message to use the original LG cable. The iOrange-E cable does not have this issue. Both were $10 on Amazon for the braided 6 foot long versions. I like the braided versions over the stiff Belkin type cables because They are eaiser to keep in my coat pocket when connected to my small 3.0 QC power bank.
I bought a good quality braided USB A to USB C cable to use as a spare for my LG V20.
When I connect my phone to my PC using the cable, the phone indicates "Charging" but it doesn't show up as a removable drive and there is an exclamation mark on the COM6 device in device manager.
Switching back to my OEM LG cable, everything works just fine.
This is the cable that I bought:
http://www.hi-online.co.za/pdp/snug-type-c-to-usb-3-cable/_/A-270091AADG5
When looking at a cable in-store, I honestly don't know how to tell which cable will work and which won't.
Now, I only really need the cable as a spare for charging purposes but I'm concerned about whether its safe for me to continue to use it for that.
There aren't a lot of options available in stores where I live but this is one other option I saw:
http://www.kanex.com/usb-c-usb3-cable
Will that work?
I've been using Samsung note 7 cables and they work great.
dcpyro1394 said:
I've been using Samsung note 7 cables and they work great.
Click to expand...
Click to collapse
Same here!
I have several A to C cables including 1 Samsung and 2 Belkin.
All work 100%.
Byte_76 said:
I bought a good quality braided USB A to USB C cable to use as a spare for my LG V20.
When I connect my phone to my PC using the cable, the phone indicates "Charging" but it doesn't show up as a removable drive and there is an exclamation mark on the COM6 device in device manager.
Switching back to my OEM LG cable, everything works just fine.
This is the cable that I bought:
http://www.hi-online.co.za/pdp/snug-type-c-to-usb-3-cable/_/A-270091AADG5
When looking at a cable in-store, I honestly don't know how to tell which cable will work and which won't.
Now, I only really need the cable as a spare for charging purposes but I'm concerned about whether its safe for me to continue to use it for that.
There aren't a lot of options available in stores where I live but this is one other option I saw:
http://www.kanex.com/usb-c-usb3-cable
Will that work?
Click to expand...
Click to collapse
I bought the above Kanex USB-A to USB-C cable and found that it has the same problem as the other cable that I bought. My V20 shows charging but I cannot transfer data and there are exclamation marks in device manager.
I researched a bit further after buying the cable and found that Benson Leung has also given a negative review of the cable on Amazon, stating that the cable is not spec compliant.
I really like Spigen products, decided on this.
https://www.amazon.com/Spigen-C10C0...71123&sr=8-1&keywords=Spigen+C10C0+USB+Type+C
And this case, had one for my Nexus 6, never failed me.
https://www.amazon.com/Spigen-Rugge...1481171214&sr=8-3&keywords=spigen+case+lg+v20
Funny enough, I have 3 Belkin cables (one is 3.1C) and all work as they're supposed to be.
I got a anker power line c to c. No issues except when I hook it up to my alienware 15 r2 usb c plug my phone will blink back and forth of charging not charging. Might try a different c to c cable and see if its cable or computer
Sent from my LG-H910 using Tapatalk
porscheoscar said:
Heads up, I picked up a couple of cables from Benson's list. One iOrange-E and one WolfBlitz.
Unfortunately the WolfBlitz does not appear to support Quick Charge 3.0. I'm getting a message to use the original LG cable. The iOrange-E cable does not have this issue. Both were $10 on Amazon for the braided 6 foot long versions. I like the braided versions over the stiff Belkin type cables because They are eaiser to keep in my coat pocket when connected to my small 3.0 QC power bank.
Click to expand...
Click to collapse
As Bensor and Nathan K point out repeatedly, the USB C spec forbids proprietary fast charging such as QC 2 and 3. USB C supports PD fast changing. Oddly, the LG charger that comes with the LG20 has QC3 but I don't use it, I use a Benson-approved PD charger.
I bought Blitzwolf 3A USB-C cable which I am using in my car with Android Auto & my HTC 10.
While I am switching to 1+3t I am thinking if I can still use same cable for Android Auto+charging in car
Any ideas?
The cable should be fine, but it will be trickle charge. Only the dash chargers provide quick charging.
I got this one for $6 on Amazon and it's Benson approved. I also brought a few Otium adapters, which sell a pair for $7 and of course Benson approved. They are so small, so I just have them all over the place. One in a bag, one in the bedroom, one in the car, and one in the office. If anyone found a good Benson approved USB-C cables that sell in packs with at least one 6ft, please share.
I bought a pack of these: https://www.amazon.com/AUKEY-Adapter-Type-C-MacBook-Google/dp/B01ANLA6OU/ref=sr_1_5?ie=UTF8&qid=1480436320&sr=8-5&keywords=usb+b+to+c+adapter which work ok and I didn't have to buy all new cables, at least for now. I will eventually get a new cable though.
GiSS88 said:
I bought a pack of these: https://www.amazon.com/AUKEY-Adapter-Type-C-MacBook-Google/dp/B01ANLA6OU/ref=sr_1_5?ie=UTF8&qid=1480436320&sr=8-5&keywords=usb+b+to+c+adapter which work ok and I didn't have to buy all new cables, at least for now. I will eventually get a new cable though.
Click to expand...
Click to collapse
These allowed you to trickle-charge via standard microUSB, correct? I have a 3T on the way, and I don't look forward to being chained to one charging cable.
donalgodon said:
These allowed you to trickle-charge via standard microUSB, correct? I have a 3T on the way, and I don't look forward to being chained to one charging cable.
Click to expand...
Click to collapse
Yes, they work fine. Description states it also has a 56kOhm resistor to prevent damage, but I don't really have any way of testing. I generally only use it as a backup at this point.
GiSS88 said:
Yes, they work fine. Description states it also has a 56kOhm resistor to prevent damage, but I don't really have any way of testing. I generally only use it as a backup at this point.
Click to expand...
Click to collapse
I had a Oneplus One and the only thing that broke on it was the charging cable, so being tied to one cable gives me pause.
Always go for high-quality well known and reviewed usb-c cable's. As dash charge uses 4 Amps+ you will definitely need a high gauge cable (thicker copper wires) to safely carry that amount of current. Tell tail signs of cheap cables are obviously slow charging but the worse case is a buildup of heat and short out of the cables. Braided also tend to have higher wear and fraying resistance. I went for one of these Anker PowerLine+ USB-C to USB
https://www.amazon.co.uk/dp/B01GN0M6NE/ref=cm_sw_r_cp_apa_O6jwyb6S54SRJ
LMcR92 said:
Always go for high-quality well known and reviewed usb-c cable's. As dash charge uses 4 Amps+ you will definitely need a high gauge cable (thicker copper wires) to safely carry that amount of current. Tell tail signs of cheap cables are obviously slow charging but the worse case is a buildup of heat and short out of the cables. Braided also tend to have higher wear and fraying resistance. I went for one of these Anker PowerLine+ USB-C to USB
https://www.amazon.co.uk/dp/B01GN0M6NE/ref=cm_sw_r_cp_apa_O6jwyb6S54SRJ
Click to expand...
Click to collapse
Yeah I just got one of these but Dash charging doesn't work. Might buy an extra from oneplus and reverse engineer and make my own.
I did discover the 1+3T slurps 1.5A (voltage drops to 4.6V)out of my desktop-PC USB2.0 socket when no data-connection is provided, and nicely reduces the current to 495 mA when connected to USB.
This with original dash-cable and Legion meter. I did not try for long though, as my mainboard is only rated for 1A.
From a good high current (IKEA) 3 x 2.1 A adapter it also takes 1.5A, with no voltage drop. So it looks to me that the phone is charging with 1.5A unless a dashcharger is directly connected, or reduced to 0.5 A when connected to USB.
When connected through my Legion meter, it will charge with 1.5A even if connected to a dash-charger.
From the cable-tables, you can select AWG 23 for 4.7A, AWG 27 for 1.7A and AWG 32 for 0.53A, so there is quite a difference
donalgodon said:
I had a Oneplus One and the only thing that broke on it was the charging cable, so being tied to one cable gives me pause.
Click to expand...
Click to collapse
If you want to be able to quick charge you will be tied down to the stock cable. I have an abundance of USB-C cables that I used to use with my Nexus 5X (charged at 2.3A on average) and none of those cable come close to charging the OP3T at 4A. I usually get around 1.4A when using 3rd party cables.
Gor this one in AliExpress, dash working and fast delivery to Spain https://es.aliexpress.com/item/100-...-Flash-Charging-USB-Wire-For/32708785156.html
I bought this before 3 months https://www.aliexpress.com/item/Ori...32695530105.html?spm=2114.13010608.0.0.nTY2Iz support dash
Also seeing about 1.5a while using high quality cables and powerful charger...tested using Ampere. Just glad that this is my first android phone that I don't need to charge throughout the day.
Previous phones: mytouch4g, s2, note 3, note 4, note 5.... Never really put the 6p through its paces.
Sent from my ONEPLUS A3000 using Tapatalk
Do you have any recommendation for car charger (cigarette lighter plug)?
One with fast charger feature which is compatible with Google Pixel 2 (USB-C PD?).
For my old Nexus 6, I must use car charger with Qualcomm Quick Charge 2.0, because otherwise the Nexus 6 will still loosing power when using car navigation software. Standard car charger cannot keep up with the battery drain.
Thanks.
I came from a Nexus 6 too. I ended up buying micro USB to usb-c mini adapters which just go on the end of my old USB leads. I threw one on the car charger and it works fine. It's a stop Gap measure, and I mainly got it for an ihome Android charger/radio, but ended up wrapping duct tape around a usb-c charger cable and putting it in the radio dock.
https://smile.amazon.com/gp/aw/ya/r...reorder_params=B01J3GG82U,112-8020237-8121850
Sent from my Pixel 2 using Tapatalk
I use the Aukey QC 3.0 car charger with dual 3.0 USB ports. It does not register as rapid charging but it is very quick. I used it with Moto Z Droid and used Google navigation while charging and it charges quick and does not lose charge. I also use the Aukey 3.0 wall charger and that does register as rapid charging.
I just bought a Deltaco (a Scandinavian brand) 3A/5V 15W car charger for 6,5 USD. Can't feel much difference compared to the original home charger's 18W using a 2. Gen Goobay 60W USB C-C cable.
Phone registers the input as rapid charging.
Ampere registers 2.7A with the screen on. Same as the standard charger, so I didn't find any reason why it should be worse
Sendt fra min Pixel 2 med Tapatalk
I bought the Nekteck 5.4 amp charger https://www.amazon.com/gp/product/B01CH9NEM2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1. The curly cord is hard wired and side mounted with a USB C plug on the end, it charges my Pixel 2 fast (charging rapidly). I had issues with other chargers and cables that wouldn't charge my Pixel 2 at full speed, this one works great. Also, it has a USB A port on the top so you can rapidly charge two devices at the same time.
The Verizon branded one works really great. Charges very fast.
Any update on these?
I'm going to buy this USB-C with Power Delivery charger from Aukey:
https://www.aukey.com/products/usb-c-dual-port-car-charger-with-power-delivery
Will report back with results.
I use the tronsmart car charger.. It charges the phone rapidly.. Made a short video on it:
I have a Verizon USB C (purchased from Amazon for $17) and it works great. It fits very tight and shows up as fast charging.
https://www.amazon.com/dp/B0711FG2TB/ref=cm_sw_r_cp_apap_sLsxpduAP1r1H
PuffDaddy_d said:
I'm going to buy this USB-C with Power Delivery charger from Aukey:
https://www.aukey.com/products/usb-c-dual-port-car-charger-with-power-delivery
Will report back with results.
Click to expand...
Click to collapse
Well, I waited too long and it is out of stock, but it looks like I may have avoided a bad purchase according to this supposed Google Engineer's review:
https://www.amazon.com/gp/aw/review/B01LGO9LE4/R3J0UNYEXFSH0X/ref=cm_cr_dp_mb_rvw_1?ie=UTF8&cursor=1
Any other power delivery compatible options?
I think the hard wired C cabled chargers are the safest bet because of all the dicey 3rd party C cables out there.
I just got the $10 Monoprice USB C charger with PD (9v 3A) because it is rated to charge the at least as fast as the in-box wall charger. Not shilling for Monoprice, just seemed like a better deal than all the sketchy chargers on Amazon with fake reviews, none of which offered anything but 5v 3A or worse at under $25. I figure it's trustworthy because they say it's certified and Benson tested their cables and said they were OK. So far it has not tried to burn my car down or nuke my phone. I'm using it with the 0.5m Monoprice cable, it was about $17 with tax for the bundle. I can't post links, search 24424 on Monoprice.
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (LINK) with 2 outlets for a USB Type-A connection to be plugged into it to charge 2 devices. I originally used it for my old phone that used a Micro-USB connection. After I got my Pixel 2, I needed new cables with its USB-C connection. I went and got these Anker USB-A to USB-C cables (LINK) so that I could charge with these cables or to connect my phone to my PC. Now, I've read that older Anker USB-C cables have had issues but from doing some more reading that these have been fixed I believe.
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Toronadian said:
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (LINK) with 2 outlets for a USB Type-A connection to be plugged into it to charge 2 devices. I originally used it for my old phone that used a Micro-USB connection. After I got my Pixel 2, I needed new cables with its USB-C connection. I went and got these Anker USB-A to USB-C cables (LINK) so that I could charge with these cables or to connect my phone to my PC. Now, I've read that older Anker USB-C cables have had issues but from doing some more reading that these have been fixed I believe.
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Click to expand...
Click to collapse
It will charge your phone just fine, but as you said, it will not fast charge. I use a similar setup now as I continue to look for the right PD car charger.
Toronadian said:
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (...)
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Click to expand...
Click to collapse
PuffDaddy_d said:
It will charge your phone just fine, but as you said, it will not fast charge. I use a similar setup now as I continue to look for the right PD car charger.
Click to expand...
Click to collapse
You guys should both look at 24424 on Monoprice. That QC charger isn't going to fast charge no matter what, I used one with a Tronsmart branded USB C to Micro B adapter that Benson recommended no problems though. They have a cheaper non-PD charger too, but why bother?
fishlifters said:
You guys should both look at 24424 on Monoprice. That QC charger isn't going to fast charge no matter what, I used one with a Tronsmart branded USB C to Micro B adapter that Benson recommended no problems though. They have a cheaper non-PD charger too, but why bother?
Click to expand...
Click to collapse
I'm sorry, I don't understand. If we already have charger that aren't PD compliant then why do you recommend buying another?
I plan to get this one since it had strong reviews and tests:
GearMo 75W QC 3.0 & USB Type C Power Delivery (PD) Car Charger works with: MacPro,Chromebook,Galaxy s8 s7 Edge Plus,Note 8,LG G6 G5 V20 V30,HTC 10,a9,8,Pixel 2 XL,Nexus,iPhone 7,iPad. FCC Approved https://www.amazon.com/dp/B07115BLPP/ref=cm_sw_r_cp_apa_bSiBAb2H2P7W0
PuffDaddy_d said:
I'm sorry, I don't understand. If we already have charger that aren't PD compliant then why do you recommend buying another?
I plan to get this one since it had strong reviews and tests:
GearMo 75W QC 3.0 & USB Type C Power Delivery (PD) Car Charger works with: MacPro,Chromebook,Galaxy s8 s7 Edge Plus,Note 8,LG G6 G5 V20 V30,HTC 10,a9,8,Pixel 2 XL,Nexus,iPhone 7,iPad. FCC Approved
Click to expand...
Click to collapse
A USB C charger 5v 3W standard will still charge faster than a USB A QC charger, but it's only $3 less on Monoprice for the non-PD one. I don't see anything on usb DOT org listing GearMo on the certified power brick chart. I wouldn't risk it. There's no reason to put a USB 3.0 A-type port on a charger, seems fishy to me.
This one looks promising as well:
https://www.amazon.com/dp/B07234DKQ5/ref=cm_sw_r_cp_awdb_t1_D0lIAb2M0BDZG
Sent from my LG-H932 using Tapatalk
I'm using this Meagoes charger from Amazon. Works well.
https://www.amazon.com/gp/product/B076H7X8QN
Hi.
Two questions:
1. Where should I look for one?
Found this on Ali-express but wanted your opinion:
http://bit.ly/2ze7U2U
2. Regarding the cable: are all cables the same? Or is this (in link - the one that comes with the OPO) different (can move more current)?
Trying to save where I can
Thank you!
benyben123 said:
Hi.
Two questions:
1. Where should I look for one?
Found this on Ali-express but wanted your opinion:
http://bit.ly/2ze7U2U
2. Regarding the cable: are all cables the same? Or is this (in link - the one that comes with the OPO) different (can move more current)?
Trying to save where I can
Thank you!
Click to expand...
Click to collapse
I recommend using original charger and cable.
https://m.ebay.com/itm/Original-OEM...%3A6a5fb7c815f0aca4b4ac59a8fffbc199%7Ciid%3A6
Mr.Ak said:
I recommend using original charger and cable.
https://m.ebay.com/itm/Original-OEM...%3A6a5fb7c815f0aca4b4ac59a8fffbc199%7Ciid%3A6
Click to expand...
Click to collapse
Thank you so much for this.
Are you the only one answering questions?
Thanks!
Truth be told you can use any charger or cable on opo as long as the cable support fast charge...i have been using Nokia charger, Xiaomi charger, apple charger and samsung charger combine with original opo cable, xiaomi cable, remax cable and samsung cable and none of them give any problem on my opo...
iPusak Gaoq™ said:
Truth be told you can use any charger or cable on opo as long as the cable support fast charge...i have been using Nokia charger, Xiaomi charger, apple charger and samsung charger combine with original opo cable, xiaomi cable, remax cable and samsung cable and none of them give any problem on my opo...
Click to expand...
Click to collapse
Thank you for this.
I have been using a 5V 2.1A charger (from Belkin) but with a "regular" old Samsung micro-usb cable and it took 6 hours to charge till full.
I can't imagine it's right.
Perhaps a new, more powerful cable?
Also, how long should it take to fully charge the One?
Thank you!!! :good:
benyben123 said:
Thank you for this.
I have been using a 5V 2.1A charger (from Belkin) but with a "regular" old Samsung micro-usb cable and it took 6 hours to charge till full.
I can't imagine it's right.
Perhaps a new, more powerful cable?
Also, how long should it take to fully charge the One?
Thank you!!! :good:
Click to expand...
Click to collapse
if you use cable that support fast charge you can charge your phone less then 2 hour...just get a cable that support fast charge or support quick charge 2.0 and you will see the difference....
getting a good cable makes all the difference. I'm not sure if it is due to Lineage, firmware or the kernel... but my OPO has been very picky with the charging cable for at least the last 9 months. I first noticed this when my Jaybird Bluebuds X flat short cable charged significantly faster (then i lost the cable). then on some cables, it would say it's charging but the percentage would remain constant or even drop at a slower rate! I then tried different cables and charger combinations using the the AccuBattery app and OPO Charging Current app to note the ampere.
the xiaomi fast charging micro usb 1.2m flat cable is cheap and charges "fast". I highly recommend the xiaomi cable (i even bought like 4 of them for the office and for home).
paired with new-ish samsung quick charge chargers (which came with the S7 and C5 Pro that i had lying around), i get about 1.58A (screen off).... i also get comparable results with an old Samsung Galaxy Tab 10.1 charger from like 2011 and an ipad 3 charger.
-SKYLINE- said:
getting a good cable makes all the difference. I'm not sure if it is due to Lineage, firmware or the kernel... but my OPO has been very picky with the charging cable for at least the last 9 months. I first noticed this when my Jaybird Bluebuds X flat short cable charged significantly faster (then i lost the cable). then on some cables, it would say it's charging but the percentage would remain constant or even drop at a slower rate! I then tried different cables and charger combinations using the the AccuBattery app and OPO Charging Current app to note the ampere.
the xiaomi fast charging micro usb 1.2m flat cable is cheap and charges "fast". I highly recommend the xiaomi cable (i even bought like 4 of them for the office and for home).
paired with new-ish samsung quick charge chargers (which came with the S7 and C5 Pro that i had lying around), i get about 1.58A (screen off).... i also get comparable results with an old Samsung Galaxy Tab 10.1 charger from like 2011 and an ipad 3 charger.
Click to expand...
Click to collapse
Thank you all for the great information!!!
Are you guys approve of this cable:
https://www.aliexpress.com/item/Mic...lgo_pvid=66a80ce9-a9b2-454e-baa8-44c3ccb87354
well I went with blitzwolf ...I don't use my original charger as blitzwolf is faster(just a tad but still) ...BW-S5 is my main and I've ordered an BW-S9(I'll make BW-S5 a second to charge my phone in my shop and also charge clients phones/tablets if needed - I fix them too)
BW-S5 has an extended review from a dude with all the pros and cons ...great review if you want to look at it(he'll do the S9 as well but didn't receive it yet and I couldn't wait, I needed a good 2nd one)
P.S. Using custom cable made by me to avoid getting slow charges(only power cable, no data - for safety too)
I'm on this charger: http://s.aliexpress.com/qeaIfIrE and reversible micro USB cable from the same manufacturer (reversible micro usb seems to be not available to buy any longer though, I can see regular micro usb only)
Both are excellent.
Reccomend a Anker Charger
Anker makes good chargers..
evronetwork said:
P.S. Using custom cable made by me to avoid getting slow charges(only power cable, no data - for safety too)
Click to expand...
Click to collapse
Can we hear more about your custom cable?
Chotech SMT0008 5V/2.4A charger
Hi anybody who want to use a longer cable (1.8m -3m) without losing the charging speed, I would recommend Chotech SMT0008 5V/2.4A charger. You would be able to increase the charging speed up to 10-15%.
https://www.aliexpress.com/item/CHO...er-for-iPhone-Samsung-Xiaomi/32742790687.html
This charger can supply up to 5.5V to compensate USB cable resistance (especially when using a longer cable).
https://lygte-info.dk/review/USBpower Choetech usb 5V 2.4A SMT0008 UK.html
Don't forget a good quality cable as well for fast charging. Up to 1.5m 22AWG is OK, but over 1.5m get a 20-21 AWG cable. If you want to learn about cable resistance during charging the below article is helpful.
https://goughlui.com/2014/10/01/usb-cable-resistance-why-your-phonetablet-might-be-charging-slow/
I myself use Chotech SMT0008 5V/2.4A with a Tronsmart 20AWG 1.8m cable. I have tested some cables: Mageek 21AWG 3m, Blitzwolf 21AWG 1.8m, Ugreen 22AWG 1.5m all of them are OK. Avoid VoxLink cables !! their "fast cable" uses fake 24-28AWG!
I'm looking to purchase a 2nd charging cable for my Pixel 5.
Can anyone recommend one that works well in the UK please, preferably on Amazon or eBay please?
Thanks in advance.
I use these, very happy with them and they are nice and limp. https://www.amazon.co.uk/gp/product/B088NLK5P5
Anker hands down - Ive put the category for you below
Anker: USB-C to C Cables
USB-C to C Cables
www.amazon.co.uk
USB C to USB C Braided Cables
Just to add the braided Anker ones i recommended are floppy and flexible. The Anker Powerline III with its vinyl cover isn't, it is quite stiff and holds the shape of kinks and bends, i used it once and put it away as a spare.
Highly recommend Anker too. Fantastic lifetime warranty on some of their cables too.
I've had good results with both of Anker's cables and also QC2.0/3.0 power bricks.
However, prior to this device I used many HTC devices. Thus, I have many new HTC brand cables that I bought in the past, and I personally prefer them..however once my new Dell laptop comes in, I'll need to order more type-c to type-c cables. Which will most likely be Anker.
I also stick to with the Anker QC2.0 brick, as the battery tends to overheat using the provided brick + cable, and charging from 10-85% is plenty fast. (I use stock, if I need a faster charge)
After the atrocious battery degrading on the HTC 10, I've been more on top of trying to keep this battery in great shape.
I'm looking forward to giving their Powerline III Flow cables a go as it seems to remove the issues i mentioned with the standard Powerline III but they only do it with a lightning connector at the minute. Sadly Anker do seem to have gone all out to capture the Apple market, even the Anker Nano charger is being pushed as an iPhone charger which is a shame really given it is the charger i use daily with my Pixel 5.
figo_rulz11 said:
Highly recommend Anker too. Fantastic lifetime warranty on some of their cables too.
Click to expand...
Click to collapse
ok Python Course