I need some info. Can someone with a Galaxy Nexus do those two commands in fastboot please? They'll just print text.
1. fastboot oem h fastboot oem ?
2. fastboot oem listpartition
Thanks!
Edit:
fastboot oem h:
FAILED (remote: Invalid Argument)
finished. total time: 0.005s
fastboot oem listpartition:
FAILED (remote: Invalid Argument)
finished. total time: 0.006s
Strange...
fastboot oem ?
Click to expand...
Click to collapse
then?
C:\p8\Android\android-sdk\platform-tools>fastboot oem
finished. total time: 1324643783.452s
I meant to try "fastboot oem ?"
I've an HTC Tattoo and I'm trying to unlock the bootloader with the HTCdev bootloader unlocking. I do everything they say to do, but when it's time to put this command:
fastboot oem get_identifier_token
I get this error:
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.008s
I've removed and inserted the battery lots of times, reinstaled the drivers, searched information, but I couldn't find any solution.
I've S-On. I suppose it's not a trouble.
Thank you in advance!, you'll help me a lot!
I have the same issue with my HTC desire Z.
It shows following error:
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.008s]
finished. total time: 0.008s
Is there another way to find identification token?
Hi,
Short story:
My One X won't boot to Android anymore. I can only enter boot / fastboot modes.
And when trying to apply modifications (fastboot flash or fastboot unlock), it shows various errors, not always the same.
Long story:
I bought this phone second hand quite a while ago, soon after its market launch. It was already unlocked and rooted, but I don't know what method had been used.
RUU says it runs release 1.28.
Boot says:
- S-On
- HBoot-0.94.0000
- Radio 1.1204.103.14
- Apr 11 2012,02:27:11
Given that it was unlocked / rooted it never received an OTA.
I recently decided to perform a full wipe, and by the way a full upgrade.
So:
- I did a CWM Recovery backup
- I flashed a «semi-stock» image, the stock de-odexed 4.18.401.3 from android-revolution (URL forbidden here, I'm a newbie!) .
- I performed a full wipe / factory reset / cache cleaning / Dalvik cache cleaning.
It didn't boot, and I learnt about the ICS / JB hboot incompatibility.
I tried to flash the boot from the android-revolution page, with no improvements.
So, I decided to revert to my Nandroid backup, from the recovery.
Didn't boot either.
Then I found a Windows computer, relocked the bootloader, and tried RUUs (3.14 and 1.26) with no success.
CID is HTC__203, so I used .401 RUU or OTA files.
RUU application stops each time at a different moment, either for usb connexion error, wrong RUU for my phone, not enough battery, or unknown error.
I read about a battery charge issue, and tried this method to charge it:
Code:
while : ; do fastboot getvar battery-voltage; fastboot reboot-bootloader; sleep 6; done
(as you may see, my main workstation is running Linux)
After a 9 hours long night:
Code:
< waiting for device >
battery-voltage: 3610mV
finished. total time: 0.100s
rebooting into bootloader...
OKAY [ 0.177s]
finished. total time: 0.177s
< waiting for device >
battery-voltage: 3610mV
finished. total time: 0.100s
rebooting into bootloader...
OKAY [ 0.177s]
finished. total time: 0.177s
It seems that it couldn't go farther than 3.6V.
But if I tried to unlock my phone after that:
Code:
[[email protected] htc_one_x]# fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
FAILED (remote: battery low)
finished. total time: 0.353s
[[email protected] htc_one_x]# fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
FAILED (remote: unknown command)
finished. total time: 1.140s
[[email protected] htc_one_x]# fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
FAILED (command write failed (Bad file descriptor))
finished. total time: 0.000s
[[email protected] htc_one_x]# fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
FAILED (remote: unknown command)
finished. total time: 1.140s
[[email protected] htc_one_x]# fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
FAILED (command write failed (Bad file descriptor))
finished. total time: 0.000s
[[email protected] htc_one_x]#
You can see error message is not always the same.
Same for my firmware.zip flash attempts:
Code:
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot oem rebootRUU
...
FAILED (remote: unknown command)
finished. total time: 0.000s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot oem rebootRUU
...
FAILED (command write failed (Cannot send after transport endpoint shutdown))
finished. total time: 5.928s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot flash zip firmware.zip
sending 'zip' (10967 KB)...
OKAY [ 1.419s]
writing 'zip'...
FAILED (remote: 13 battery low)
finished. total time: 1.629s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot flash zip firmware.zip
sending 'zip' (10967 KB)...
FAILED (remote: unknown command)
finished. total time: 1.005s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot flash zip firmware.zip
sending 'zip' (10967 KB)...
FAILED (command write failed (Bad file descriptor))
finished. total time: 0.000s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot flash zip firmware.zip
sending 'zip' (10967 KB)...
FAILED (remote: unknown command)
finished. total time: 1.005s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]# fastboot flash zip firmware.zip
sending 'zip' (10967 KB)...
FAILED (command write failed (Bad file descriptor))
finished. total time: 0.000s
[[email protected] OTA_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2-1.29.401.11_release_2749568xzb2t6wu96omqzo]#
What is the real issue? Why can't it give me a consistent error ?
What else could I try?
Thanks for reading this long post and trying to help me!
hervenicol said:
Hi,
What is the real issue? Why can't it give me a consistent error ?
What else could I try?
Thanks for reading this long post and trying to help me!
Click to expand...
Click to collapse
Give me result from command fastboot getvar version-main
Download this fastboot.zip and extract it to a folder fastboot rename the file fastboot-linux to fastboot. The file fastboot only is for windows and if you want to keep it rename fastboot to fastboot-windows
Thant said:
Give me result from command fastboot getvar version-main
Click to expand...
Click to collapse
Here it is, with both versions of fastboot:
1 - my one, from the Android SDK
2 - yours
Code:
[[email protected] fastboot]# fastboot getvar version-main
version-main: 1.28.401.9
finished. total time: 0.006s
[[email protected] fastboot]# ./fastboot getvar version-main
version-main: 1.28.401.9
[[email protected] fastboot]#
hervenicol said:
Here it is, with both versions of fastboot:
1 - my one, from the Android SDK
2 - yours
Code:
[[email protected] fastboot]# fastboot getvar version-main
version-main: 1.28.401.9
finished. total time: 0.006s
[[email protected] fastboot]# ./fastboot getvar version-main
version-main: 1.28.401.9
[[email protected] fastboot]#
Click to expand...
Click to collapse
1. Charge your phone
2. Download this RUU 1.28.401.9
3. Lock your bootloader with command fastboot oem lock
4. Run the RUU as administrator
5. Aplly all update to latest JB from Settings/Software update
Thant said:
1. Charge your phone
2. Download RUU 1.28.401.9 (link removed from quote)
3. Lock your bootloader with command fastboot oem lock
4. Run the RUU as administrator
5. Aplly all update to latest JB from Settings/Software update
Click to expand...
Click to collapse
That's exactly what I was trying to do.
I finally succeeded, few minutes ago, after charging to 3920mv.
It looks like the USB cable quality has a big impact on the charging capabilities:
- with a cheap cable I couldn't go farther than 3.6xx V.
- When I changed my cable, it was charging much faster, up to 3.9xx V.
…then at this level of charge the RUU*worked.
Thanks anyway for your help! :good:
Now it's doing OTA*updates…
hervenicol said:
That's exactly what I was trying to do.
I finally succeeded, few minutes ago, after charging to 3920mv.
It looks like the USB cable quality has a big impact on the charging capabilities:
- with a cheap cable I couldn't go farther than 3.6xx V.
- When I changed my cable, it was charging much faster, up to 3.9xx V.
…then at this level of charge the RUU*worked.
Thanks anyway for your help! :good:
Now it's doing OTA*updates…
Click to expand...
Click to collapse
Good to hear that:good:
All upgrades applied, works like a charm
I set the title for this answer with [SOLVED], I hope it applies to the thread as well.
Now let's look for a way to root this rom!
when ever i try to flash or erase a file in fastboot mode on my lg g4 i keep getting the error
FAILED (remote: cannot erase this partition in unlocked state)
finished. total time: 0.024s
and when i lock the bootloader in fastboot mode and try again i still get an error
erasing 'laf'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.023s
please what do i do? i really need your help
Mortal Killer said:
when ever i try to flash or erase a file in fastboot mode on my lg g4 i keep getting the error
FAILED (remote: cannot erase this partition in unlocked state)
finished. total time: 0.024s
and when i lock the bootloader in fastboot mode and try again i still get an error
erasing 'laf'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.023s
please what do i do? i really need your help
Click to expand...
Click to collapse
Double post and Member requested to close the thread
THREAD CLOSED
Hey all. I'm having a problem when i try to unlock bootloader on my xa2 H4113. When i run sudo fastboot oem unlock 0xCA0DDD1AFEF6DDCC It returns with an error
FAILED (remote: unknown command)
finished. total time: 0.000s
I've tried to search for help but have found it nowhere. All help is appreciated! Thanks!
Actually no problem it just worked