Go FastBoot from DownloadMode? - G3 Q&A, Help & Troubleshooting

Hi,
I ended up flashing wrong recovery, boots and most of the system partition on my LG G3 Sprint LS990 with D855's partitions.
Now my phone doesn't go into any mode beside loading only DOWNLOAD Mode, that sound pretty good as we could run LG Flashtool to flash new ROM straight aways but it keep show error message at RePartition Fail.
So, I am now seeking a ways to run my phone into FastBoot to let me reflashing correct Boot Partition, Recovery Partition and More Partition.
Make you understand that my phone is only go to DOWNLOAD MODE now, how to run Send_Command to let phone restart into FastBoot?

mkhmer said:
Hi,
I ended up flashing wrong recovery, boots and most of the system partition on my LG G3 Sprint LS990 with D855's partitions.
Now my phone doesn't go into any mode beside loading only DOWNLOAD Mode, that sound pretty good as we could run LG Flashtool to flash new ROM straight aways but it keep show error message at RePartition Fail.
So, I am now seeking a ways to run my phone into FastBoot to let me reflashing correct Boot Partition, Recovery Partition and More Partition.
Make you understand that my phone is only go to DOWNLOAD MODE now, how to run Send_Command to let phone restart into FastBoot?
Click to expand...
Click to collapse
You can edit TOT file. and try again

vanly6.2 said:
You can edit TOT file. and try again
Click to expand...
Click to collapse
How to edit TOT file?

mkhmer said:
How to edit TOT file?
Click to expand...
Click to collapse
contact me : facebook.com/cuong89

I can help you via TeamViewer too, just send PM me.

Related

Unbrick help / Need bin. files

Hy nexus friends,
I need help from someone with a 791F 32GB. I dont know if a 790 or a 16gb version is identical.
It would be great if someone with a rooted device can make a backup for me of the bootloader bin files.
aboot, sbl1, rpm, tz, sdi, sbl1b, tzb, rpmb, abootb, misc, laf, persist.
I flashed the hammerhead bootloader and stuck at 9008 mode.
It will be ver great if someone could help me.
Some partition apps could make a backup or with the dd command.
If i fet a solution, i would post it here. At the moment i had the device and the tools that i flashed for test a nexus 5 sbl. So write is possible.
Thanks for help guys
Where can I see if my phone is 791F?
i have the US Nexus 5X 32GB. Tell me what to do and I'll get you what you need.
tacofromhell said:
Where can I see if my phone is 791F?
Click to expand...
Click to collapse
Model number on the phone box and I believe in the bootloader screen: turn off phone then hold volume down and power.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Model number on the phone box and I believe in the bootloader screen: turn off phone then hold volume down and power.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Ok. Just rebooted into bootloader and under "Variant" it says LGH791 but no F, sorry
Thx for your help.
You can backup the partitions with some partition backup apps or with dd.
If you look with a file explorer in /dev/block/platform/soc.0/f9824900.sdhci/by-name/XXXXX , XXXX there are the partiton names.
If you want to copy with adb, make adb shell, su, and then:
dd if= /dev/block/platform/soc.0/f9824900.sdhci/by-name/cmnlib of=sdcard/cmnlib.img
Around 36 partitons are in the MM build. System, cache, userdata are not needed..
konsolen said:
Thx for your help.
You can backup the partitions with some partition backup apps or with dd.
If you look with a file explorer in /dev/block/platform/soc.0/f9824900.sdhci/by-name/XXXXX , XXXX there are the partiton names.
If you want to copy with adb, make adb shell, su, and then:
dd if= /dev/block/platform/soc.0/f9824900.sdhci/by-name/cmnlib of=sdcard/cmnlib.img
Around 36 partitons are in the MM build. System, cache, userdata are not needed..
Click to expand...
Click to collapse
Have you found a solution to get booting again? Been searching and tried multiple methods to repair my boot image on the H791 I own.
I have worked with another XDAer who extracted and now have the bootimage files from several stock H791 files available. They include the GPT from the stock image MDA89E and the boot image files from bootloader-bullhead-bhz10i.img bootloader-bullhead-bhz10k.img and bootloader-bullhead-bhz10m.img. Let me know if you still need these. I see 11 files in the boot image. During some testing I flashed over the sbl1 on my device and lost the ability do anything but go into QUSB DL mode 9008 as well.
As I am writing this I am now wondering if there is a separate set of SBL etc. files for the International variant? We may need to extract from the 791 tot file available the needed files if we do not have another method of obtaining them. Let me know if you have found a workable way to flash the needed boot images in place. Thanks.
nate0 said:
Have you found a solution to get booting again? Been searching and tried multiple methods to repair my boot image on the H791 I own.
I have worked with another XDAer who extracted and now have the bootimage files from several stock H791 files available. They include the GPT from the stock image MDA89E and the boot image files from bootloader-bullhead-bhz10i.img bootloader-bullhead-bhz10k.img and bootloader-bullhead-bhz10m.img. Let me know if you still need these. I see 11 files in the boot image. During some testing I flashed over the sbl1 on my device and lost the ability do anything but go into QUSB DL mode 9008 as well.
As I am writing this I am now wondering if there is a separate set of SBL etc. files for the International variant? We may need to extract from the 791 tot file available the needed files if we do not have another method of obtaining them. Let me know if you have found a workable way to flash the needed boot images in place. Thanks.
Click to expand...
Click to collapse
I'm on the same boat , hope you have something to boot it up
It's been more than 3 weeks, my 5X just brick itself . And LG doesn't support 5X in my country . I'm very very hoping you will find solution.
Apayah said:
I'm on the same boat , hope you have something to boot it up
It's been more than 3 weeks, my 5X just brick itself . And LG doesn't support 5X in my country . I'm very very hoping you will find solution.
Click to expand...
Click to collapse
I think the only way from my perspective so far is to manually flash the needed QComm/boot image/boot loader files with something that can interface with the phone. I am pretty sure I know a method to manually do this but need the flash programmer that works with this device to accomplish. Or if there is a way to add MSM8992 support to the BoardDiag tool, that would work...I have not given up, just have not had a whole lot of time to work on this the past 2 days.
nate0 said:
I think the only way from my perspective so far is to manually flash the needed QComm/boot image/boot loader files with something that can interface with the phone. I am pretty sure I know a method to manually do this but need the flash programmer that works with this device to accomplish. Or if there is a way to add MSM8992 support to the BoardDiag tool, that would work...I have not given up, just have not had a whole lot of time to work on this the past 2 days.
Click to expand...
Click to collapse
I see boardiag for n5 , please don't give up ?.
And i see blank flash file for N6
Try to connect the usb cable with the pressed vol up button. Normaly the lg download screen should pop up.
Its possible then to flash a tot file with the lg up tool.
But i found only one tot file around the i net.
It will be flashed but hang in the bootscreen.
A org. tot or kdz file were great or a solution to create such a file.
konsolen said:
Try to connect the usb cable with the pressed vol up button. Normaly the lg download screen should pop up.
Its possible then to flash a tot file with the lg up tool.
But i found only one tot file around the i net.
It will be flashed but hang in the bootscreen.
A org. tot or kdz file were great or a solution to create such a file.
Click to expand...
Click to collapse
I can go to download mode but it can't hang , the screen turns to black Immediately. I'm just waiting for another way .
Apayah said:
I can go to download mode but it can't hang , the screen turns to black Immediately. I'm just waiting for another way .
Click to expand...
Click to collapse
Yes. The FW download screen is not an option here. Seems those of us currently needing a solution or method is do to the phone being in QC emergency mode only. I can see my phone in device manager only as with the QC HUSB 9008 drivers.
nate0 said:
Yes. The FW download screen is not an option here. Seems those of us currently needing a solution or method is do to the phone being in QC emergency mode only. I can see my phone in device manager only as with the QC HUSB 9008 drivers.
Click to expand...
Click to collapse
Yes it same , i got that to.
So what is blank flash? on N6 thread .
链接:https://pan.baidu.com/s/1TmQ9jmdAym2NYt_YGyt2Cg 引脚:g5cg

LG G3 Brick, i try all

Hello I read all threads with brick text, i try all and i cant to unbrick my phone.
I try to update my lg g3 but i block the bootloader or something, then i enter in fasboot and i delete recover and follow this tutorial
http://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184
With this i sure make a mistake, i upload all from 30b version, and in the tutorial dont say i need to flash custom1 and custom2, so i didnt... then i get out from fastboot and now i enter in download mode. I use flash tool 2014 and flash tool for tot files, with 2014 not work, with tot file it starts (i try with 10a and 10e version) but try to delete custom partition and fails in 6% says this
[17: 7:55] Can not find Parition name : cust
and not work any more.
I think the problem is that is expected 30b with custom partition and is not there, so it not continue. Any ideas what can i do?
Orko2002, can you enter to download mode ?
UvarovG said:
Orko2002, can you enter to download mode ?
Click to expand...
Click to collapse
Yes is the only mode i cant enter, download mode (pressing vol +) and got to upload firmware screen. I connect to flash tool and up to 6% and crash.
I try factory reset (power + vol -) it says ok but nothing happends... now if i power normal, lg logo starts, says boot verification fails, and the screen goes black.
>I connect to flash tool and up to 6% and crash.
What happens if try to restore stock rom via "LG Mobile Support Tool" ?
UvarovG said:
>I connect to flash tool and up to 6% and crash.
What happens if try to restore stock rom via "LG Mobile Support Tool" ?
Click to expand...
Click to collapse
Thanks for reply!
When i open lg mobile support tool and connect the cel on download mode, the LGST doesn´t detect the mobile....
I go to admnistrative tools and see the cel on COM41 but the tool doesnt detect it. Can i do something to detect?
Anyone knows where download 30c or 30b tot file? i cant find it, to try with a new tot
[deleted]

G4 Refurbished "Services Disabled" Help please

Body H811, Motherboard F500L Rom F500L11D
I've factory reset + Flashing it's not work
Help please
rock2rap said:
Body H811, Motherboard F500L Rom F500L11D
I've factory reset + Flashing it's not work
Help please
Click to expand...
Click to collapse
there is hope we have a few other users here that have gone throught this i will attempt to find him and see if he can guide u
i contacted him so he may be in touch with some info
rock2rap said:
Body H811, Motherboard F500L Rom F500L11D
I've factory reset + Flashing it's not work
Help please
Click to expand...
Click to collapse
you are in the same boat with me
can you boot up your system or you have no download mode?
do tell if you get any charging or no battery sign
shamescool said:
you are in the same boat with me
can you boot up your system or you have no download mode?
do tell if you get any charging or no battery sign
Click to expand...
Click to collapse
did u never get ures goin
shamescool said:
you are in the same boat with me
can you boot up your system or you have no download mode?
do tell if you get any charging or no battery sign
Click to expand...
Click to collapse
Now i can boot up and use fine all things. Can enter Download Mode, Fastboot mode
EXCEPT Calling, 3G 4G , SMS that's big PROBLEM for me
I am also using refurbished with F500L motherboard with H811 body..
Flash respective ToT in download mode.Mine worked.It's very easy.
rock2rap said:
Now i can boot up and use fine all things. Can enter Download Mode, Fastboot mode
EXCEPT Calling, 3G 4G , SMS that's big PROBLEM for me
Click to expand...
Click to collapse
Then your case is quite easy just download WinHex
and install it then download f500l v11d tot file and then open it up in win hex
Using search in winhex find xVLG and then change f500l to h811 (if you are on h811 firmware) then save edited file and flash it with lgup(may brick your device)or lg flashtool v1.8
Note:for removing L in win hex just point on it and then replace its codes from left side to 00 (which means blank in hexadecimal)dont try to delete it using delete key cause it takes forever
---------- Post added at 08:33 PM ---------- Previous post was at 08:25 PM ----------
TheMadScientist420 said:
did u never get ures goin
Click to expand...
Click to collapse
I did and i found that f500l is just written on mobo and the phone itself is ls991 so i flashed ls991 firmware and phone is working perfectly except for sd card.tried f500 firmware but i lost imei baseband carrier camera...but in f500 firmware sd card works??
shamescool said:
Then your case is quite easy just download WinHex
and install it then download f500l v11d tot file and then open it up in win hex
Using search in winhex find xVLG and then change f500l to h811 (if you are on h811 firmware) then save edited file and flash it with lgup(may brick your device)or lg flashtool v1.8
Note:for removing L in win hex just point on it and then replace its codes from left side to 00 (which means blank in hexadecimal)dont try to delete it using delete key cause it takes forever
Click to expand...
Click to collapse
Now. i'm on F500L 11D firmware and Flashing with H811 10n by Hex Editor (Change F500L to H811). Flashing OK.
My IMEI is fine
But Mobile network not work as before...
Possible to Hardware problem?
rock2rap said:
Now. i'm on F500L 11D firmware and Flashing with H811 10n by Hex Editor (Change F500L to H811). Flashing OK.
My IMEI is fine
But Mobile network not work as before...
Possible to Hardware problem?
Click to expand...
Click to collapse
I wont agree but it could be just test it with an app now answer me kindly with your experience:
Which program are you using to flash tot?
Lgup or flashtool?
Has your phone bricked after flashing?
Does sd card work properly?
shamescool said:
I wont agree but it could be just test it with an app now answer me kindly with your experience:
Which program are you using to flash tot?
Lgup or flashtool?
Has your phone bricked after flashing?
Does sd card work properly?
Click to expand...
Click to collapse
I've using LGUP to flashing H811-10 Rom untill 80% that's bricked (9008) and I fixed by QFIL with LS991 Recovery
Now I can enter to Android OS.
But...
It working ABNORMAL! and Stuck Periodically (Camera wont work, Playstore Force Close, Can't Play All Video Media)
I'll fix by flashing Modem.bin(F500L) by Fastboot mode
After that's it's working fine except All video media still does not working (Camera can take a picture but not recording video. maybe flashing QFIL recovery file not complete)
SD Card not test... i dont have it
...
By the way... My Mobile Network STILL NOT WORKING... oh my god
rock2rap said:
I've using LGUP to flashing H811-10 Rom untill 80% that's bricked (9008) and I fixed by QFIL with LS991 Recovery
Now I can enter to Android OS.
But...
It working ABNORMAL! and Stuck Periodically (Camera wont work, Playstore Force Close, Can't Play All Video Media)
I'll fix by flashing Modem.bin(F500L) by Fastboot mode
After that's it's working fine except All video media still does not working (Camera can take a picture but not recording video. maybe flashing QFIL recovery file not complete)
SD Card not test... i dont have it
...
By the way... My Mobile Network STILL NOT WORKING... oh my god
Click to expand...
Click to collapse
first try to flash every partition from f500 except systems and user datas(generally every thing under 20 mb and modem and laf) and brick it one more time
after that u may flash ls991 files once more time and then you will have camcorder working and mobile network may get fixed
sd card does nt work on my phone i fixed the phone my way but i lost sd card read and write and i cant really figure out why it happens
UPDATE..
Mobile Network come back working again when I reboot device..
and i try reboot after that.... Services Disabled and No Services again... f... What the PROBLEM??
shamescool said:
first try to flash every partition from f500 except systems and user datas(generally every thing under 20 mb and modem and laf) and brick it one more time
after that u may flash ls991 files once more time and then you will have camcorder working and mobile network may get fixed
sd card does nt work on my phone i fixed the phone my way but i lost sd card read and write and i cant really figure out why it happens
Click to expand...
Click to collapse
Now i've clean TOT flash by this thread https://forum.xda-developers.com/g4/development/rom-rootedpure-image-g4-korean-f500-t3321855
ALL fine but...
Mobile network still not coming.....
You can example me for F500L partitions files list?
rock2rap said:
Now i've clean TOT flash by this thread https://forum.xda-developers.com/g4/development/rom-rootedpure-image-g4-korean-f500-t3321855
ALL fine but...
Mobile network still not coming.....
You can example me for F500L partitions files list?
Click to expand...
Click to collapse
aboot
hyp
laf
misc
modem
persist
pmic
rct
recovery
rpm
sbl1
sdi
tz
These are the files from F500 tot file but you can extract them from your devices firmware kdz or tot
if you have unstable phone or any issue caused by ls991 files extract them using LgFirmwareExtractor and change all of them to .img files with no number then erase and flash them in fastboot
note: DO NOT FLASH A PART OF THIS LIST OR YOU WOULD HAVE TO SHORT THE TESTPOINTS ALWAYS FLASH THESE FILES COMPLETELY
NOTE:after flashing there is a major chance of brick in this case:
just flash the ls991 files using qfil and boot the phone from MiniOS to system and use your phone.No need to flash through fastboot again
WORKING:All except Bugs
Bugs:Sd card and OTG does not work because of messed up mnt partition
Possible workaround:delete gpt files from ls991 files and flash the rest(Not Tested Not gauranteed)
Hit the thanks Button!
Example code for flashing:
fastboot erase laf
fastboot flash laf laf.img
Bump

Nuked LAF = No Download Mode,always without fastboot

Hello everyone, today I made a bull****, let's start from the beginning, my K10 2017 M250n had Android Oreo and I had come to know the exploit LGLAF, I tried, and did not work because I discovered that the flaw was patched on Android Oreo but I had the idea to downgrade to Nougat, after hours of problems due to drivers I can flashare nougat with LG UP in Download Mode, after doing the Downgrade, with the Dual-Boot to Linux on PC I used LGLAF on Linux, I made a backup of the LAF partition, I have the IMG file, a backup of the recovery, always an IMG I created, I did the wipe, I restarted and I tried to boot in fastboot, it does not boot, I tried to start in Download Mode, it does not work, all this to try to unlock the BootLoader, flash the TWRP and root.
Now how do I update and report the Download Mode?
I'm stuck without Fastboot, without Download Mode and with Android Nougat.
http://www.mediafire.com/file/y0d8sj4od5j3a34/laf.img/file
http://www.mediafire.com/file/179cr1b1y2d62cy/recovery.img/file
But you can boot it normally, I guess. Then hopefully Oreo ota update fixes it...
No, I can not find the updates anymore
XRed_CubeX said:
No, I can not find the updates anymore
Click to expand...
Click to collapse
i suggest that you try to update your phone via lg up by downloading the kdz of your exact phone model and without booting into download mode just by booting normal and i hope it solved
no warranty No promises... and no responsibility i take
abdoh01 said:
i suggest that you try to update your phone via lg up by downloading the kdz of your exact phone model and without booting into download mode just by booting normal and i hope it solved
no warranty No promises... and no responsibility i take
Click to expand...
Click to collapse
I tried and does not work, simply before Flash restarts you downloading and mode flash but I'm unloaded mode.
XRed_CubeX said:
No, I can not find the updates anymore
Click to expand...
Click to collapse
And you have done the factory reset? Then maybe laf is needed for the fota too??
At the end is the latest fota update, but no idea if it can be used similar way as before. [***]
https://forum.xda-developers.com/showpost.php?p=59103556&postcount=326
Now it probably should be named as dlpkgfile and placed in /data/fota/ or /cache/fota/ if smaller ...
But how to put it there, IDK... Also LGUP has some FOTA mode but haven't tested it.
LGM250nAT-V20b-EUR-XX-AUG-13-2018+0_fota.up
https://mega.nz/#!WpkERCgK!QiqndSPXG2aaaq7jqoG27IyBvhfd16bh6G2gNs7UoeA
edit: [***] hiddenmenu opens by calling *#546368#*250# and there you'll find that package select
mentioned in the first link. File in /storage/emulated/0/SoftwareUpdate/ shows but I don't want to update yet...
:good:
CXZa said:
And you have done the factory reset? Then maybe laf is needed for the fota too??
At the end is the latest fota update, but no idea if it can be used similar way as before. [***]
https://forum.xda-developers.com/showpost.php?p=59103556&postcount=326
Now it probably should be named as dlpkgfile and placed in /data/fota/ or /cache/fota/ if smaller ...
But how to put it there, IDK... Also LGUP has some FOTA mode but haven't tested it.
LGM250nAT-V20b-EUR-XX-AUG-13-2018+0_fota.up
https://mega.nz/#!WpkERCgK!QiqndSPXG2aaaq7jqoG27IyBvhfd16bh6G2gNs7UoeA
edit: [***] hiddenmenu opens by calling *#546368#*250# and there you'll find that package select
mentioned in the first link. File in /storage/emulated/0/SoftwareUpdate/ shows but I don't want to update yet...
:good:
Click to expand...
Click to collapse
Error RESULT_NOT_EXECUTED
XRed_CubeX said:
Error RESULT_NOT_EXECUTED
Click to expand...
Click to collapse
Pity... it then maybe use laf - although there is also fota tools on
the recovery. What about LGUP, is there fota option or have I dreamed it.
CXZa said:
Pity... it then maybe use laf - although there is also fota tools on
the recovery. What about LGUP, is there fota option or have I dreamed it.
Click to expand...
Click to collapse
The problem that I have formatted laf,i cant boot on download mode, how can I reboot in recovery mode?
XRed_CubeX said:
The problem that I have formatted laf,i cant boot on download mode, how can I reboot in recovery mode?
Click to expand...
Click to collapse
Some fota tools are there in the sbin, but I don't know how can they be activated.
Fota file must be in some default folder and recovery maybe booted having a
command somewhere....
You can reboot to recovery using adb, or in terminal "reboot recovery"
or "setprop sys.powerctl reboot,recovery"
I was thinking that maybe LGUP changes the mode like it does
before flashing kdz files. If in normal mode, that is.
And if it uses recovery mode with fota then it might work.
Just hoping not knowing...
CXZa said:
Some fota tools are there in the sbin, but I don't know how can they be activated.
Fota file must be in some default folder and recovery maybe booted having a
command somewhere....
You can reboot to recovery using adb, or in terminal "reboot recovery"
or "setprop sys.powerctl reboot,recovery"
I was thinking that maybe LGUP changes the mode like it does
before flashing kdz files. If in normal mode, that is.
And if it uses recovery mode with fota then it might work.
Just hoping not knowing...
Click to expand...
Click to collapse
The recovery mode says No Command.
XRed_CubeX said:
The recovery mode says No Command.
Click to expand...
Click to collapse
Press power and then vol up shortly. Same time that is.
CXZa said:
Press power and then vol up shortly. Same time that is.
Click to expand...
Click to collapse
When I try to do FOTA upgrade on LG UP it gives me the error "Error: 0x2000, Fail! MTP is not Running" but when in fact the device to recognize the port MUST be in MTP and I in MTP mode I have it put.
XRed_CubeX said:
When I try to do FOTA upgrade on LG UP it gives me the error "Error: 0x2000, Fail! MTP is not Running" but when in fact the device to recognize the port MUST be in MTP and I in MTP mode I have it put.
Click to expand...
Click to collapse
IDK. Are you using LGUP having a patched exe and the dll?
Is the dll our own? Does it matter if it's own or not? IDK.
Patching it is instructed somewhere...
edit: patching not needed as fota mode shows already.
edit22: have you the WPDAPI.exe in the LGUP\main\Common dir?
the LGUP_Common.dll might need it...
There is still that other way, using that "Activity Launcher" app,
or "am start -n com.lge.lgfota.permission/com.lge.lgfota.permission.DmcEzUpdateStart"
And what about a newer tool, LGBridge? I read somewhere at LGlaf github
that its or SupportTool's protocol data looks different compared to LGlaf.
https://github.com/Lekensteyn/lglaf/issues/7
What else is different...
CXZa said:
IDK. Are you using LGUP having a patched exe and the dll?
Is the dll our own? Does it matter if it's own or not? IDK.
Patching it is instructed somewhere...
edit: patching not needed as fota mode shows already.
edit22: have you the WPDAPI.exe in the LGUP\main\Common dir?
the LGUP_Common.dll might need it...
There is still that other way, using that "Activity Launcher" app,
or "am start -n com.lge.lgfota.permission/com.lge.lgfota.permission.DmcEzUpdateStart"
And what about a newer tool, LGBridge? I read somewhere at LGlaf github
that its or SupportTool's protocol data looks different compared to LGlaf.
https://github.com/Lekensteyn/lglaf/issues/7
What else is different...
Click to expand...
Click to collapse
How to get WPDAPI?
XRed_CubeX said:
How to get WPDAPI?
Click to expand...
Click to collapse
It's many times included in those hacked version packages.
I guess it was included with dll needed, but don't know for sure.
Here it's needed
https://forum.xda-developers.com/showpost.php?p=75677301&postcount=6
I don't when it will be needed in this long thread.
https://forum.xda-developers.com/lg-g5/how-to/unlocking-lgup-features-fun-profit-t3634650
Maybe it's said somewhere in it. The exe is mentioned in the dll though...
From where? See the attachment. The UI_Config.lgl in it gives more options.
No hacking and cracking needed. But is a hacked version better, IDK...
CXZa said:
It's many times included in those hacked version packages.
I guess it was included with dll needed, but don't know for sure.
Here it's needed
https://forum.xda-developers.com/showpost.php?p=75677301&postcount=6
I don't when it will be needed in this long thread.
https://forum.xda-developers.com/lg-g5/how-to/unlocking-lgup-features-fun-profit-t3634650
Maybe it's said somewhere in it. The exe is mentioned in the dll though...
From where? See the attachment. The UI_Config.lgl in it gives more options.
No hacking and cracking needed. But is a hacked version better, IDK...
Click to expand...
Click to collapse
Always the same error, but also the method of DmcEzUpdateStart remains with the words "FOTA EASY UPDATE" and then crash.
No solution?
There is a scatter file so you can flash it from SP Flash Tools??
XRed_CubeX said:
There is a scatter file so you can flash it from SP Flash Tools??
Click to expand...
Click to collapse
LG has made so much changes that I think that it doesn't work as mtk device anymore.
Anyway the MTK driver package IDs probably have to be changed... at least.
With LG drivers installed, the SP Flash Tool readback started, a text about
LG connection was shown, but it just failed - miserably...
If you uninstall the lg drivers and maybe mtk too. And then connect it
(without the battery?), you might see that it shows itself as MTK preloader
for a second or two. With lg drivers it shows as something else, I think...
When doing readback from a normal mtk device I think it is the preloader
which is used. When downloading a firmware, I don't remember does it
switch to another state that is used... serial or whatever the text says
in SP Flash Tool, but was it with or without the preloader text... ??? IDR...

unbrick Nokia 3.2

Hello together,
after many tries to get my nokia 3.2 rooted, i end up now with a black screen.
Only the Qulacomm mode is working.
Get anyone managed to flash the stock firmware with QFIL provided from the rooting thread?
I always end up with "sahara fails".
Every help is welcome!
Thanks!!!!
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
page1875 said:
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
Click to expand...
Click to collapse
please do, i encountered a similar problem.
HowTo Flash STOCK 00WW
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
page1875 said:
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
Click to expand...
Click to collapse
Thank you for your reply, it seems that your problem is more complicated than mine.
I have a global variant with 00WW software and i attempt to root the phone. I successfully flash the patched boot.img and had root access. However wi-fi didn't work after that.
Since before flashing the patched boot.img my phone was running on a different firmware from the one that boot.img was extracted from, so i think that was the problem.
I attempted to use QFIL to flash my phone back to 00WW_15 and it failed half way, bricked my phone.
Normally you can use the EDL Mode every time.
My phone only showed black screen and it was always possible to connect in EDL Mode and flash again.
Did you try to flash again? What happens then?
Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
Click to expand...
Click to collapse
What did you mean by Flash the given image ? Was it flash the firmware package with QFIL ?
My main problem is flashing, it always failed half-way and the error log reported that needed files were missing from the package.
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
page1875 said:
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
Click to expand...
Click to collapse
@update:
Also the files "demoapp.img", "dp_AP_signed.mbn" and "dp_MSA_signed.mbn" are missing.
Remove them from the XML file and try again!
@update
Okay QFIL still failed half-way but i manually flash the user images and my phone boots normally now
Hello,
my nokia 3.2 europe variant wont boot up its stuck in fastboot mode. What can i do to bring it back?
I get this: FAILED (remote: partition table doesn't exist)
P.S. if i do a fastboot reboot it boots back into bootloader
I also had this problems for many many times and don't know what went wrong when this happens.
The only thing that helped was flashing the complete firmware again in EDL-mode.
You can try first to flash only the 5 user-images with fastboot, which i mentioned before in this thread.
I uploaded this files for you, because you don't will find the europe files in internet yet.
Here is the link:
https://transfernow.net/81iti7q21s0s
Good luck!
Hi,
Thank you very much. Is this the complete Firmware? (All Images from Device) Another question: I couldnt Access the recovery System. Did you have the same Problem when your Nokia didnt boot up and was stuck in Bootloader? So is this normal that the recovery is unaccessible?
Yes, that also happens sometimes with my phone.
No, that are not all firmware files, which you need to do a full EDL-Flash.
But with this files you can first try a fastboot flash!
If it does not work, you can take all the other files from the Global-Stock-Firmware, given in the thread https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206.
Delete the 5 files with the same names, flash the Global-Stock-Firmware in EDL-Mode, with QFIL or QDL, (without the 5 files) and in the following flash the 5 europe-image files with fastboot.
Thanks, ive sent it in and got Friday a 00WW Variant of the device back. I will upload those User images for 00EEA to my Google drive so that anyone who needs those files can download them
hello
i wanted to install custom rom and i bricked my phone. i lost recovery mode and i have only fastboot mode .but can not write any img file for example twrp.img beacuse show this error : FAILED (remote: partition table doesn't exist). can please anyone help me.
thank you very much
thanks so much i was able to put my phone back to life. i had almost given up.
smure said:
thanks so much i was able to put my phone back to life. i had almost given up.
Click to expand...
Click to collapse
Hello to ervery one
how you flashed your phone. can you please guide?
i am also stucked in fastboot mode after rooting.
damn... I've been finding on how to restore the wifi and sound because I uninstalled magisk and it failed. I don't think I can thank you enough for this post.

Categories

Resources