Related
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
I do not experience this issue. When you flashed the rom, did you do a clean install? Have you formatting the device?
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Crimson Ghoul said:
Yup.. I format everything.. I use the touch recovery and just use every option that it provides and wipe everything.. It even does it when there is nothing installed. I usually delete almost all the useless system apps that I don't use like the google music app and all of the ones civato provides... I even change the animation settings to .5 in the developer section.. should I turn them off all together?
Click to expand...
Click to collapse
The animations should not have anything to do with it. Does this only occur on that rom? Have you tried other roms and experienced that issue?
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Crimson Ghoul said:
not many other roms out there.. I have used stock and his.. had the same issue on both.. Also happens on my brother's a500.. it usually happens when unlocking and going into any app.. it sits there for a few seconds and then opens whatever it is i opened
Click to expand...
Click to collapse
This is starting to sound like a hardware issue. Before that is concluded, you could:
- Make sure the governor is not set to "conservative"
- Try a clean install of CM9
If the problem still arises, its most likely a hardware issue.
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Crimson Ghoul said:
I'm using the OC kernel and have it to 1500.. I also always leave it on performance.. I figure it would kill my battery life but I don't use it much.. and i tried cm9 also.. too many issues as of right now
Click to expand...
Click to collapse
It doesn't seem it can be anything else but a hardware issue in that case.
NB. Overclocking to a high frequency can cause instability and bring about that issue (but since you experienced it on the stock rom, its quite likely not to be that).
the overclocking helps to speed it up a tad bit.. for the most part it just lags.. i did a clean install just now
Thought I would jump in. Stock ics would slow down and lag on me, jittery transitions poor performance in games or movies, but it took an hour not a few minutes. However testing the T20 kernel before the release kernel had that exact issue, bogging and lagging within minutes.
His release kernel doesnt do it, and flex extreme as well as my cm9 builds don't, even with T20 kernel. Consider flashing that kernel to see what happens.
Side note...what issues did you have with cm9? And what release? My build 1 has been running for 3 days no reboots stable as can be undervolted and OC when needed. Something to maybe think to try to see if it persists. T20 kernel works fine with it too.
Tapatalked from my Galaxy S II.
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Yup, EVERYTIME I turned on my screen then unlocked it to laggggggg for a lil while. I'm now using CM9 n that issues gone. Try CM9
forum.xda-developers.com/showthread.php?t=1705554
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
That reminds me...setting a screen off profile with the same min/Max speed can cause issues with that, give Max a notch or two higher. And don't have it change the governor leave it the same. So like interactive screen on Myst nit be conservative screen off, doesn't work that way.
Tapatalked from my Galaxy S II.
I had the same issue on stock. I noticed there are 2 weather applications installed (version 1 and version 2) immediately after I disabled the old weather application (version 1) this stopped happening. I used the ICS GUI to do the disable.
This might not be the case in custom rom, but is true for stock. Post reply and let me know if this fixed it for you also.
Crimson Ghoul said:
Does any one else's a100 become super laggy after a few minutes of being on.. I am running the latest flex reaper I even overclock it all the way but I get this huge lag after the first few minutes of being on.. anyone else experience this or have a fix for this?
Click to expand...
Click to collapse
Do you have a micro SD card plugged in? Try reformatting the card with a computer. Worked for me.
Sent from my A100 using XDA
I felt the need to add my two cents in this....this has been happening to me for the longest with the flex reaper rom ONLY. I've used stock and ZN's rom and those did not lag after unlock...only flex reaper. I'm currently using flex reaper and still experience it from time to time but doesn't destroy my day at all...
Give the CM9 nightly ROM's a go. No Bluetooth n no HDMI audio, but everything else is fine n damn smooth. Those issues will be fixed though
A100 Running CM9 Nightly ROM n ezT20 OC Kernel :-D
eww245 said:
To prevent the lagg after unlock, I set the governor to ondemand and the minimum frequency to 312.
Click to expand...
Click to collapse
I installed Flex 100 Reaper with stock and it it seemed to run smooth enough. Then I installed the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
htc_softbank said:
I installed Flex 100 Reaper with the OC kernal, and started to get lag. I was looking around to find the OC settings, but can't see it anywhere in settings..
Can anyone direct me to where can I adjust the governor/max/min CPU settings?
Sorry for the noob question.
Click to expand...
Click to collapse
Setcpu from the play store.
The overclock settings are not integrated like CM.
i've heard some people can OC their GIO to 921MHz stable, but on my gio it can't even get stable on 883Mhz. on 864MHz is somewhat stable but i still get hung or FC randomly, im super stable at 844MHz.
Why does my phone can't be OC like them other guys?
Not all devices are made exactly the same. Processors can behave differently as do the batteries and other hardware.
bogdanwp said:
Not all devices are made exactly the same. Processors can behave differently as do the batteries and other hardware.
Click to expand...
Click to collapse
is there nothing i can do? i've tried many ROMS, on some i can get to 921 for a few seconds, but still the same. will changing kernel help?
Why not stop overclocking ? Just find a very fast rom and then you can save the overclocking , hence the instability and hotness and draining battery. That way you will have longer life on your Gio.
L.E. : just change the minimum frequency to 245 and refrain from using roms that are heavy right now , like CM 10.1 , try anything based on gingerbread like Adrenaline or Enhanced 2.3.6 or DebianDroid for example , or AOSP ICS wich i find very fast.
bogdanwp said:
Why not stop overclocking ? Just find a very fast rom and then you can save the overclocking , hence the instability and hotness and draining battery. That way you will have longer life on your Gio.
L.E. : just change the minimum frequency to 245 and refrain from using roms that are heavy right now , like CM 10.1 , try anything based on gingerbread like Adrenaline or Enhanced 2.3.6 or DebianDroid for example , or AOSP ICS wich i find very fast.
Click to expand...
Click to collapse
well currently im using AOKP milestone 6 CM9 based, i use conservative governor 245-844MHz, installed adrenaline engine 4.4, and pim my rom and set my OOM and LMK to medium settings. battery is drained only when im using data or playing games obviously. actually this ROM is superb for me performance wise, its just, i feel like i can squeeze a bit more of it for playing games you know. its like i see this slight lagging and i thought if only i could use a little more CPU power, the lag will be gone
Even you can overclock a 1st gen AMD Duron to 2Ghz with liquid nitrogen, it just doesn't make sense doing it
AW: [Q] OC problem
i can oc my cpu to 960mhz but i think it makes no sense... you don't feel the extra speed in normal use only in benchmarks... my cpu is set to 480mhz because it's enough for every app i am using (facebook, whatsapp, xda, browser and so on).
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Add the Gs4 as well
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Seraz007 said:
Add the Gs4 as well
Click to expand...
Click to collapse
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
beekay201 said:
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
Click to expand...
Click to collapse
I'ts not problem about OC , even if i set to 1,2ghz there are no changes , i just dont know what could be the problem , cuz the game runs smooth on other phone which is not good as this one , thats weird , im not controlling voltages , i didn't touch anything.
samersh72 said:
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
Click to expand...
Click to collapse
No , it didnt help. I already tried it before , but when i Force 4x MSAA it just makes game more lagy , maybe cuz of game , anyway i gave an example Temple Run 2 , but even other 3D games are laging , why shouldnt I OC to 1.6 , could brick phone or ?
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
beekay201 said:
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
Click to expand...
Click to collapse
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
wizox said:
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
Click to expand...
Click to collapse
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
beekay201 said:
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
Click to expand...
Click to collapse
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
wizox said:
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
Click to expand...
Click to collapse
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
wizox said:
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
Click to expand...
Click to collapse
Do you even know anything about ROMs and kernels?
When I said have you tested this on stock kernel, I meant, did you try this on stock ROM, but specified kernel because, it's like, common knowledge for someone who flashes ROMs, that custom ROMs devs often alter kernel (and ramdisk) to support features on their custom roms..
Have you for example tried reflashing PA, and just PA, nothing else? Does it lag then?
Have you for example tried fully reverting back to stock? (factory images)
Why is it that you just want your games not to lag, not even trying to gain a deeper understanding about what people are telling you.
Listen, this is the last time I'm saying this:
I told you to check your voltages, since you're OC'ing, and expecting SR to do the job for you.
Test by reflashing again PA, with no custom kernel.
Test by going back to stock, through fastboot/factory images.
Temple Run 2 on best quality lags in mine too.Probably it was designed for 1080p.Just keep the graphics a little lower, doesn't affect gameplay or quality
Sent from my maguro
Hello,
I installed 'Tegra Overclock' (paid version from google play) yesterday on my HOX. After setting the governor to 'interactive', my phone began to lag like hell and CPU suddenly went to over 70 C within 10 seconds. Luckily everything works again like before because I've powered my phone off & on.
Is that normal? Can someone provide me a explanation or some proper settings for gaming? I just need settings for demanding games such as Real Racing 3, everything else I'd leave stock anyway. (switching via profiles in the tegra overclock app from gaming to stock I mean)
Unbenannt0412 said:
Hello,
I installed 'Tegra Overclock' (paid version from google play) yesterday on my HOX. After setting the governor to 'interactive', my phone began to lag like hell and CPU suddenly went to over 70 C within 10 seconds. Luckily everything works again like before because I've powered my phone off & on.
Is that normal? Can someone provide me a explanation or some proper settings for gaming? I just need settings for demanding games such as Real Racing 3, everything else I'd leave stock anyway. (switching via profiles in the tegra overclock app from gaming to stock I mean)
Click to expand...
Click to collapse
first: which kernel are you using?
second: i use interactive/deadline, but if you eperience issues try other combinations... for example ondemand/noop...
lukes91 said:
first: which kernel are you using?
second: i use interactive/deadline, but if you eperience issues try other combinations... for example ondemand/noop...
Click to expand...
Click to collapse
Sorry, I'm using the stock kernel. (the one that comes with ARHD 33.1)
Unbenannt0412 said:
Sorry, I'm using the stock kernel. (the one that comes with ARHD 33.1)
Click to expand...
Click to collapse
try another kernel and check if you have the same issues
if you do, you should try another governor/scheduler setting, otherwise you are fine
How about the kernel? What's a good performance kernel? or do I even need one? There's a guy in this forum who has managed to boost his Samsung GT-I8150's fps to 20! now how in the world did he do that? my current fps is max at 6fps(antutu benchmark) with only basic apps installed and most unneeded running apps forced-stop. i know there's so much can be done on this phone since its..ehh..a low specs device bt isnt Android(linux based) is all about reviving the dead? lol
dude127 said:
How about the kernel? What's a good performance kernel? or do I even need one? There's a guy in this forum who has managed to boost his Samsung GT-I8150's fps to 20! now how in the world did he do that? my current fps is max at 6fps(antutu benchmark) with only basic apps installed and most unneeded running apps forced-stop. i know there's so much can be done on this phone since its..ehh..a low specs device bt isnt Android(linux based) is all about reviving the dead? lol
Click to expand...
Click to collapse
Im running CM10.2 currently. So far, so good, even though theres bugs still present. As far as I know, there aren't any CM10.2 kernel for the W so you're stuck with the stock kernel that comes with the ROM itself. Im thinking that the guy who managed to somehow "boost" his device is probably running GB i mean its rock stable.
I made my SGW by flashing PurePerfomanceX® Tweaks and also uninstalling stupid useless system app like CM updater and LWPs. Also, since there's no other custom kernel for 4.3 (like i mentioned) I tweaked the Interactive governor from the guys at the GNexus forum and switched my I/O scheduler to deadline. Again, its pretty smooth although the only thing that I find irritating is the stutters i find when scrolling some super heavy apps but obv, this aint a Nexus 5 soo bare with the lags. Some additions i did was installing Seeder and LagFix (can be found at GPlayStore)
Sent from the internet
TiTAN-O-One said:
Im running CM10.2 currently. So far, so good, even though theres bugs still present. As far as I know, there aren't any CM10.2 kernel for the W so you're stuck with the stock kernel that comes with the ROM itself. Im thinking that the guy who managed to somehow "boost" his device is probably running GB i mean its rock stable.
I made my SGW by flashing PurePerfomanceX® Tweaks and also uninstalling stupid useless system app like CM updater and LWPs. Also, since there's no other custom kernel for 4.3 (like i mentioned) I tweaked the Interactive governor from the guys at the GNexus forum and switched my I/O scheduler to deadline. Again, its pretty smooth although the only thing that I find irritating is the stutters i find when scrolling some super heavy apps but obv, this aint a Nexus 5 soo bare with the lags. Some additions i did was installing Seeder and LagFix (can be found at GPlayStore)
Sent from the internet
Click to expand...
Click to collapse
Woah man thanks alot on recomending the PurePerfomanceX® Tweaks! what a difference it makes lol and do i need to install those seeders&lagfix? im not a gamer so yeah are they really necessary? one other thing, how do i get the SmartassV2 governor? doesnt pureperformancex script includes that aswell? and finally(i promise! lol) do any of these tweaks help in conserving battery? prior to this, the battery was draining like mad it could be the condition of battery since ive had this phone for almost 2years now. before i go out and get new battery maybe if there was a tweak that could help reviving this old fella would be super. buying new phone is out of the question for the time being since i lost my samsung note3 2weeks ago..sigh sad life.
anyway thanks alot brother for the kind help