LG D855 - G3 Q&A, Help & Troubleshooting

Hey Guys,i have LG D855 which is stuck on update firmware,i tried many firmwares KDZ and TOT files but no luck,whenever i try to flash with kdz file then it stuck on 2% then show retry i retried many times but same stuck on 2%.And when i try to flash it with tot file then it gave error after 6seconds.i also tried to update it online with lg support tool but same.Any expert can help me guide me,sory for my bad english.

When i flash tot with LG tool i always get error, but it goes on still. Have you installed proper drivers?

ken1337 said:
When i flash tot with LG tool i always get error, but it goes on still. Have you installed proper drivers?
Click to expand...
Click to collapse
yes drivers are installed properly.Before 3 days ago i flashed F180s.

Use usb 2.0 port

Nomi1987 said:
Hey Guys,i have LG D855 which is stuck on update firmware,i tried many firmwares KDZ and TOT files but no luck,whenever i try to flash with kdz file then it stuck on 2% then show retry i retried many times but same stuck on 2%.And when i try to flash it with tot file then it gave error after 6seconds.i also tried to update it online with lg support tool but same.Any expert can help me guide me,sory for my bad english.
Click to expand...
Click to collapse
I am facing the same issue here with my lg D855. have u found any way to flash kdz? I am getting the same error at 2%. No matter how many times I did.

Related

flashed D855 rom to LS990 and only .tot roms available "device modele diff".. HELP!

flashed D855 rom to LS990 and only .tot roms available "device modele diff".. HELP!
Hello everyone !
So i bought this G3 online (second hand), on th back it sais it's D855 variant 32/3 and it had kitkat.. and wanted to upgrade so i looked it up and found MM update 30B.kdz so i backed up my EFS and flashed it then i got stuck in a bootloop so i flashed another rom LP 21A.kdz and it worked but no network neither WiFi or BT.. USB debugging works but no MTP or PTP connexion and Model name became D855V.. i looked this problem online and someone mentionned it may be caused because it's a different variant, checked my device info on some IMEI check websites and they said it's L990.. i opened it up to confirme and it says it's indeed a LS990 on the motherboard.. so i tried to flash a LS990 rom back but all i could find is a .TOT extension roms which demands a .dll file and check etc.. and no .kdz since Sprint didn't realease any as far i found out, i tried flashing them using LGUP and LG Flash Tool and they both gave me an erreur message that it's a different device modele.. tried different .dll files LS990....dll , D855....dll and LGUP8974.dll wich is supposed to ignore some checks but still nothing worked.. i think .kdz roms doesn't do that check wich brought me to this problem in the 1st place.. but i couldn't find a .kdz rom for LS990 anywhere.. found US990...kdz but don't think it's the same !
So somone told me to try sth so i installed a hex editor(HxD) and opened the LS990 .tot and searched for every "LS990" header and changed them all to what replaces "D855" in D855 .tot.. stop me if i'm in the wrong way, then saved the work so the LS990 .tot should be disguised as a D855 .tot right ? and i got the D855 .dll already. i was worried that it would cause a hardbrick or sth .. it's not like i have many options but i just didn't want to make things worse.. then i tried to flash it anyway but both lg flash tool and lgup pop up an errour message after check and stops before it even starts
Ps: while i was in Maths class i was trying o think of sth.. and thought
that i may be able to root it and install TWRP then flash a LS990 rom since i have USB debugging working.. but i have to root it first and the way to root it while on LP is LG One Click Root but i'm having a hard time doing that although i tried everything but i think that's because of the wrong rom.. just wanted to mention it !
guys please help !.. i'm a civil engineering student whom is drowning in debts and spent the last money i got on this phone because i needed it and can't afford to lose it like that.. you could letteraly save my life ;D
sorry for bad English.

[Help] Stuck on download mode after trying to return to stock rom

Hello everyone
My probleme is kind simple : i'm stuck on download mode after failing to return to stock rom with the ToT method (Lg Flash Tool)
My phone is a LG G3 D885 V10n
i tried to go back to stock rom (this one LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0)
i followed the tuto here on the forum but i haved a error at 6% (3sec) :
[ERROR] : Partition Change factory Partition
before trying the tot methodei tried with kdz methode (Lg Flash Tool 2014 ) but i got error at 2%
Thank you for the help
Sorry for bad english
Blazezius said:
Hello everyone
My probleme is kind simple : i'm stuck on download mode after failing to return to stock rom with the ToT method (Lg Flash Tool)
My phone is a LG G3 D885 V10n
i tried to go back to stock rom (this one LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0)
i followed the tuto here on the forum but i haved a error at 6% (3sec) :
[ERROR] : Partition Change factory Partition
before trying the tot methodei tried with kdz methode (Lg Flash Tool 2014 ) but i got error at 2%
Thank you for the help
Sorry for bad english
Click to expand...
Click to collapse
Again try with kdz ignore error just look into your phone flash is running or not....try to use different cable or pc...
Anik49 said:
Again try with kdz ignore error just look into your phone flash is running or not....try to use different cable or pc...
Click to expand...
Click to collapse
2hr ignoring the error no news :/
Blazezius said:
2hr ignoring the error no news :/
Click to expand...
Click to collapse
Are you sure you install proper driver....for flash tool and try different pc and cable
Blazezius said:
Hello everyone
My probleme is kind simple : i'm stuck on download mode after failing to return to stock rom with the ToT method (Lg Flash Tool)
My phone is a LG G3 D885 V10n
i tried to go back to stock rom (this one LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0)
i followed the tuto here on the forum but i haved a error at 6% (3sec) :
[ERROR] : Partition Change factory Partition
before trying the tot methodei tried with kdz methode (Lg Flash Tool 2014 ) but i got error at 2%
Thank you for the help
Sorry for bad english
Click to expand...
Click to collapse
I don't know but it seems you're going from v10n to v10e it looks like a downgrade of firmware, I think you gotta do extra steps when you wanted to do a downgrade... Anyway, why don't you try to flash latest KDZ, you can find it here http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=XXXXXXXXXXXXXXX just replace the X's with your IMEI that can be found if you remove your battery or in the box. Once you enter your IMEI without hyphens you can find where it says <sw_url> there will be the URL to the latest firmware. Good luck.

Help save a bricked lg g3

:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
Same problem here
RsGilbert said:
Same problem here
Click to expand...
Click to collapse
Hey. I got it fixed all by myself. Whatsapp me at +2348166225097 and I will help.
I own lg g3 d855
It boot until home screen but after a while black screen and it s hard to power on it again. Then need to wait a time to boot it again.
What the problem?
---------- Post added at 06:50 PM ---------- Previous post was at 06:46 PM ----------
Amlmx said:
I own lg g3 d855
It boot until home screen but after a while black screen and it s hard to power on it again. Then need to wait a time to boot it again.
What the problem?
Click to expand...
Click to collapse
Please anyone can help me?
Thanks
Thank you Litblogger
Litblogger said:
Hey. I got it fixed all by myself. Whatsapp me at +2348166225097 and I will help.
Click to expand...
Click to collapse
My thanks to Litblogger and xda. I got it fixed with your help on whatsapp, Litblogger. My phone is currently back to stock. I couldnt thank you again because the phone is now network locked. Maybe we could speak on facebook. My user name is Gilbert R Ssenyonjo.
RsGilbert said:
My thanks to Litblogger and xda. I got it fixed with your help on whatsapp, Litblogger. My phone is currently back to stock. I couldnt thank you again because the phone is now network locked. Maybe we could speak on facebook. My user name is Gilbert R Ssenyonjo.
Click to expand...
Click to collapse
Folks.
Got the same problem now (with my wife's phone). I'd appreciate it if instead of helping people privately you'd tell everyone what to do to fix the problem.
I had the same problem, downloaded .tot file via IMEI check (can't remember where from) and used that .tot file with BoardDiag, flashed everything as in tutorial (google it), it was 4.4.2 Android, couldn't update it (software is up to date) so I rooted it, flashed twrp 3.0.0 and installed Fulmics 8.0, it works now just fine

Plz some help lg up 0x2000 invalid command repsonse

Hi guy,
first thx for everyone working to make the lg g4 better .
i have lg g4 H815P it is running the new update N 7.0 (v29a) . i have been using it since like a month and the battery was rly drains insainly since then so i decide to roll it back to 5.1 , so i boot it up without checking the roll back version again it was 0 before i update it , so after choosing the .kdz v10e i used refurbished and press start . it reaches to the system and in 25% it showed me a message error : 0x2000 invalid command response . i search but found nothing on that and i tried to boot it up to 7.0 but it took me to the download mode and tell me in the little box ( 633A B61 Modified)with modfied on red so what i can to do to get it back , btw it is clean version of nouget with no root and locked bootloader and i can reach fastboot .
i tried the lg up 1.8v method but keep tell me connection fail error . some help plz . <3 thx guys
PS: i think it is fine if can find a way to flash the v29a (nouget korean ) through , i just want it to back i don't care about the version
did you search it? where?, cause here in the forum there are a some of threads with the same issue...
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
Thx any way
the_naxhoo said:
did you search it? where?, cause here in the forum there are a some of threads with the same issue...
Click to expand...
Click to collapse
i tried this method but same give me error at 633A B99 while flashing the system partition
link
the_naxhoo said:
did you search it? where?, cause here in the forum there are a some of threads with the same issue...
Click to expand...
Click to collapse
i find a way maybe work with a tot file but i can't find it for my h815p device can u help me finding the link
fffirass said:
i find a way maybe work with a tot file but i can't find it for my h815p device can u help me finding the link
Click to expand...
Click to collapse
if the tot or kdz are for H815EU, then it will works for any other H815x (including H815p).
I'm a H815p's user too.
thx
the_naxhoo said:
if the tot or kdz are for H815EU, then it will works for any other H815x (including H815p).
I'm a H815p's user too.
Click to expand...
Click to collapse
there is a tot file for h815 i will try it then lets see what happened
???
the_naxhoo said:
if the tot or kdz are for H815EU, then it will works for any other H815x (including H815p).
I'm a H815p's user too.
Click to expand...
Click to collapse
do u know a way to check the roll back version from the download mode or the fastboot mode
fffirass said:
do u know a way to check the roll back version from the download mode or the fastboot mode
Click to expand...
Click to collapse
AFAIK, the H815p don't have anti-rollback... so you should have ARB v0
thx
the_naxhoo said:
AFAIK, the H815p don't have anti-rollback... so you should have ARB v0
Click to expand...
Click to collapse
oh , thx then what the problem could be btw i am downloading the tot file for h815
i will give u the results after i try btw if u have any version of v20 in ur phone i suggest to keep it stock without any try to unlock the bootloader and take care of it , because in last 7 days there is a second bootloop issue
fffirass said:
Hi guy,
first thx for everyone working to make the lg g4 better .
i have lg g4 H815P it is running the new update N 7.0 (v29a) . i have been using it since like a month and the battery was rly drains insainly since then so i decide to roll it back to 5.1 , so i boot it up without checking the roll back version again it was 0 before i update it , so after choosing the .kdz v10e i used refurbished and press start . it reaches to the system and in 25% it showed me a message error : 0x2000 invalid command response . i search but found nothing on that and i tried to boot it up to 7.0 but it took me to the download mode and tell me in the little box ( 633A B61 Modified)with modfied on red so what i can to do to get it back , btw it is clean version of nouget with no root and locked bootloader and i can reach fastboot .
i tried the lg up 1.8v method but keep tell me connection fail error . some help plz . <3 thx guys
PS: i think it is fine if can find a way to flash the v29a (nouget korean ) through , i just want it to back i don't care about the version
Click to expand...
Click to collapse
Hey..
I have exact the same Problem while upgrading to 7.0 via tot File. After update stucks after 21% and get same error - 0x2000 invalid command response.
After Battery pulling i´ve used LG Bridge in Software Update Tab and use Correct update error, but LG Bridge tells me there is no Update Error, my System is up to date
I changed some LGUP 8994.dll files, there are some out there...nothing is working.
Try to "downgrade" H81520D_6.0.00_0115.kdz via LGUP, but after 21% it fails too.
So, what next ? Any one a working Idea for me ? Thank you.
Foto-AG said:
Hey..
I have exact the same Problem while upgrading to 7.0 via tot File. After update stucks after 21% and get same error - 0x2000 invalid command response.
After Battery pulling i´ve used LG Bridge in Software Update Tab and use Correct update error, but LG Bridge tells me there is no Update Error, my System is up to date
I changed some LGUP 8994.dll files, there are some out there...nothing is working.
Try to "downgrade" H81520D_6.0.00_0115.kdz via LGUP, but after 21% it fails too.
So, what next ? Any one a working Idea for me ? Thank you.
Click to expand...
Click to collapse
Use v20p!
the_naxhoo said:
Use v20p!
Click to expand...
Click to collapse
Hey the_naxhoo !
Thank you for Helping, 20p was my Key.
I´ve flashed the H81520p_00_0314.kdz.
There are some 20p Versions out there and tested them all, but only the H81520p_00_0314.kdz was worked for me after i´ve extracted the LGUP_8994.dll from the H81520p_00_0314.kdz file with the Tool Windows LGFirmwareExtract-1.2.6.1
Puhhh, i´m so Happy now.
Thank you all PPl here in XDA and wish you all a Wonderfull Christmas !
-Ralf-
Erro on LG UP G4 H818p
I'm instal the android 7.0 Tot file on my H818p using LG UP and this error appears 0x2000 and I can't go back to android 5.1 please help I'm need my phone back
midnightmaster said:
I'm instal the android 7.0 Tot file on my H818p using LG UP and this error appears 0x2000 and I can't go back to android 5.1 please help I'm need my phone back
Click to expand...
Click to collapse
You tried the H81520p_00_0314.kdz Rom ? Only this Rom version is working for you.
Greets
Foto-AG said:
You tried the H81520p_00_0314.kdz Rom ? Only this Rom version is working for you.
Greets
Click to expand...
Click to collapse
Thanks, I tried this method but it did not work on my H818p, but I fixed my phone using this method https://forum.xda-developers.com/g4/general/fix-unbricking-lg-g4-h818p-stuck- t3707485
Foto-AG said:
Hey the_naxhoo !
Thank you for Helping, 20p was my Key.
I´ve flashed the H81520p_00_0314.kdz.
There are some 20p Versions out there and tested them all, but only the H81520p_00_0314.kdz was worked for me after i´ve extracted the LGUP_8994.dll from the H81520p_00_0314.kdz file with the Tool Windows LGFirmwareExtract-1.2.6.1
Puhhh, i´m so Happy now.
Thank you all PPl here in XDA and wish you all a Wonderfull Christmas !
-Ralf-
Click to expand...
Click to collapse
Guys, You've saved my life! Thanks a lot!
Works like a charm in my LG G4 H815P!
LG H815 - error on every firmware
Hi guys,
I have same problem, already been through all the solutions that I have found, including H81520p_00_0314.kdz and replacing DLL from this firmware. Still got error 0x2000 :/ Any ideas? I have checked mainboar and model is H815 without any letter after.
OK, some update - extracting DLL helped, I can flash firmware, but phone stucks on LG logo and don't want to boot up :/
Hello,
Thank you so much, this method worked - H81520p_00_0314.kdz.
Now how can I install another version of android 6, which is officially in Romania? I honestly do not know which version I should install! (V20?-EUR-xx)?
Please give me all the steps to follow to install an official version.
Thx.
PS: my phone is LG H815 International version, Carrier less.
the_naxhoo said:
did you search it? Where?, cause here in the forum there are a some of threads with the same issue...
https://forum.xda-developers.com/showpost.php?p=73642302&postcount=4
Click to expand...
Click to collapse
eres el puto amoo tiooo me la pase mas de 7 horas buscando una solucion gracias!!!!!

lg g4 lgup error pls fast help

Hi guys ,
i have lg g4 h815p on v29a and i want to roll it back so i grab a kdz then try to flash it but it gives me 0x2000 invalid command response i tried another kdz but it didn't work i even tried the v29a tot file but the same it give me this error at system like 24% i tried to replace the dll file but didn;t work any ideas pls i want to get phone back i don't care 5.1 or 6.0 or 7.0 so some help and thx in advance .
fffirass said:
Hi guys ,
i have lg g4 h815p on v29a and i want to roll it back so i grab a kdz then try to flash it but it gives me 0x2000 invalid command response i tried another kdz but it didn't work i even tried the v29a tot file but the same it give me this error at system like 24% i tried to replace the dll file but didn;t work any ideas pls i want to get phone back i don't care 5.1 or 6.0 or 7.0 so some help and thx in advance .
Click to expand...
Click to collapse
replace with this files in Crogram files/lg electronics/lgup/model/8994 make buck up of old files..
http://www.mediafire.com/file/3umc5jboc0cwcm5/8994.zip
a
raptorddd said:
replace with this files in Crogram files/lg electronics/lgup/model/8994 make buck up of old files..
http://www.mediafire.com/file/3umc5jboc0cwcm5/8994.zip
Click to expand...
Click to collapse
i get the same error but now at 11% insted of 24% and btw i can't enter system every time i boot up it take me to the download me and tell me
6333A B50
modified
fffirass said:
i get the same error but now at 11% insted of 24% and btw i can't enter system every time i boot up it take me to the download me and tell me
6333A B50
modified
Click to expand...
Click to collapse
sorry cant help you. search and see if someone has fix for it.
Search Downgrade Android Nougat LG G4 H815P | H818P on YouTube, that solved my brick
Thxxxxxxxxxxxxxxx
dylank said:
Search Downgrade Android Nougat LG G4 H815P | H818P on YouTube, that solved my brick
Click to expand...
Click to collapse
i tried this method but didn't work but then I flash a kdz i had already and it works .
idk what is fcking wrong with this company .
You downgraded because no network? Isn't Nougat good? I too am planning to install V29A soon on my H818P
When I've this problem on my LG G4 H818P, I install F500K30c_00_0710.kdz which has been modified. After install system is in bootloop. I don't hard reset because modem. Then I install H81520o Moded.kdz, and then Lollipop or Marshmallow.
dylank said:
Search Downgrade Android Nougat LG G4 H815P | H818P on YouTube, that solved my brick
Click to expand...
Click to collapse
Thanks man, you saved me!

Categories

Resources