hi, I have the model ze500cl, turns on but remains stuck on the screen "asus in search of incredible" and turns off after a minute, I tried to get into recovery but does not work, I tried to get into fastboot but does not work .if I connect to the PC in the device Manager appears for a few seconds "Cloverview" but after disconnects immediately. is there any hope to restore it?
thanks
urgu said:
hi, I have the model ze500cl, turns on but remains stuck on the screen "asus in search of incredible" and turns off after a minute, I tried to get into recovery but does not work, I tried to get into fastboot but does not work .if I connect to the PC in the device Manager appears for a few seconds "Cloverview" but after disconnects immediately. is there any hope to restore it?
thanks
Click to expand...
Click to collapse
Are you using the correct steps to enter recovery mode?
1. Power off your phone
2. Press and hold the volume up button, then press and hold power until the phone vibrates
3. Let go of power ONLY
4. Use volume keys to select recovery mode on the next screen.
5. If you have stock recovery, it will say "Error". While holding power+Vol down, press and release Vol up.
Related
Hey Guys
So my friend gave me a Note 2 with 4.1.1 that's stuck in safe mode.
So i tried installing TWRP to install a KitKat rom, but i forgot to format data "stupid me :\"
anyways at first it booted till the part where it's "optimizing apps"
after it got to "finishing boot" it rebooted and, well, it's stuck in a bootloop.
so i tried getting into recovery by pressing the 3 buttons, it just continues with booting into the bootloop.
then i tried getting in download mode, it gets to the warning screen, but it refuses to continue when i press the volume up button :|
any help?? thank you
taha_elfeituri said:
Hey Guys
So my friend gave me a Note 2 with 4.1.1 that's stuck in safe mode.
So i tried installing TWRP to install a KitKat rom, but i forgot to format data "stupid me :\"
anyways at first it booted till the part where it's "optimizing apps"
after it got to "finishing boot" it rebooted and, well, it's stuck in a bootloop.
so i tried getting into recovery by pressing the 3 buttons, it just continues with booting into the bootloop.
then i tried getting in download mode, it gets to the warning screen, but it refuses to continue when i press the volume up button :|
any help?? thank you
Click to expand...
Click to collapse
perhaps try to reboot you phone by long press power button...
if you could get the phone to be recognized by adb then you could use:
adb reboot download
to get to download mode.
Just a reminder:
TWRP :Vol Up + Home + Power (Release Power Button when samsung logo appears, keep holidn Vol Up + Home untill you see TWRP )
Download Mode: Vol Down + Home + Power, then press up when warning appears.
Hope this helps.
dabenaute said:
perhaps try to reboot you phone by long press power button...
Click to expand...
Click to collapse
tried that, with no success
bobfbaby said:
if you could get the phone to be recognized by adb then you could use:
adb reboot download
to get to download mode.
Just a reminder:
TWRP :Vol Up + Home + Power (Release Power Button when samsung logo appears, keep holidn Vol Up + Home untill you see TWRP )
Download Mode: Vol Down + Home + Power, then press up when warning appears.
Hope this helps.
Click to expand...
Click to collapse
that was how i used to get the phone in download/recovery back when it was in safe mode.
but now, adb can recognize the phone, but it's "unauthorized" and stuck in a bootloop so i'm screwed :\
Anyways i think i should just take it to a repair shop but thanks so much for ur help guys ^^
Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
nasser789 said:
Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
Click to expand...
Click to collapse
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to http://www.android.gs/enter-recovery-mode-lg-g3/) mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
gee2012 said:
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to [ mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
Click to expand...
Click to collapse
thank you very much for your response.
i tried it same problem stuck in booting the phone lg logo. i tried to put in the download mode the phone stuck on lg logo.
the only response from the phone is when i press the whole buttons and it take me to a koren menu showing imei.
I tried to install the gapps aplicataion , so I enter to recovery mode.
then I entered accidentally to 'wipe cache pratition" and then I turned off the phone Immediately (its just start the action).
After that I try to turn on the phone and this stuck on this screen (first iamge).
So I treid to back to recovery mode and when I enter to recovery boot in the bootloader its restart my phone and now its stuck on this screen (second image).
when I try to click on the power button and the "+" its show me the three image to a sec and the back to blink with the screen on the second image.
please help me to solve it
When entering BOOTLOADER are you able to press volume down and see NORMAL BOOT, POWER OFF, RECOVERY MODE, & RESTART BOOTLOADER? If so have you selected Normal boot instead of recovery mode?
Also try booting in safe mode.
When power is off:
1. Long press power key to boot.
2. When ASUS logo appears, press and hold volume down key till home screen appears
3. “Safe Mode” reminder appears on the lower-left of home screen
Sincerely,
Frank
ASUS_USA
[email protected]
I have the exact same symptoms, though I didn't do anything to trigger it - the phone just failed to boot this morning.
Did you get this fixed or is it going to be yet another warranty claim?
Hello
I was updating from a M version to another M verions. But I had to use the temporary recovery method.
This is what I was doing but didn't finish properly
Requirements:
1. Unlocked bootloader
2. TWRP for Z00A (Download | How to Install TWRP)
Unlock Bootloader on Android 6.0 Marshmallow ZenFone 2 ZE551ML/ZE550ML
Download tool (Download Here)
1. Extract it and connect Zenfone 2 with laptop/pc
2. Click unlock.bat will automatically detect whether the adb or fastboot mode, and then reboot into bootloader
3. Will appear on the screen to unlock the success of mobile phones after five seconds will reboot, then hold volume up the phone automatically re-boot back to bootloader.
4. If you missed the previous step, press the power button for 10 seconds off, then press the "Volume Up" and hold the power button to boot into bootloader.
5. After the phone has successfully re-enter the bootloader, click restore.bat on the computer, where the restore refers to the restore Android ifwi 6.0 otherwise Android phone can not enter the system.
6. The phone will reboot and restore white on black ASUS logo screen, and then enter the Android system.
Click to expand...
Click to collapse
I extracted and connect my zen2
Ran the unlock.bat
The phone entered the bootloader, flash his things and boot again but on the white screen
Then I had to hold power button 10s to turn it off and turn it on again
Entered the bootloadr by holding Power+Vol UP then to recovery.
At this time I just used the recovery as I usualy do, Wipe everything, cache, data, etc.
Connect to the PC, put the new UL-Z00A-WW-4.21.40.184-user.zip there and flash.
BUT now that comes the problem. I select the option to boot it after finish flashing.
So obviously I didnt finish the steps mentioned on the quote above.
I didnt ran the restore.bat before reboot into system and now All I see is black screen.
I've tryed some steps of those tutorials for briked phones but My computer can't see the device for long enough
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
I try to do those steps but I'm stuck on this part
now back to the Zenfone 2, hold power for 20 seconds to shutdown, then press simultaneously the key "power" + "volume down", until phone vibrates. Or computer makes detection sound, wait a few seconds it will add an item immediately below intelSoC in device manager “MOOREFIELD” new devices is successful.
Click to expand...
Click to collapse
My phone doesn't boot even on bootloader. It just vibrate twice and then nothing happens.
On my device manager I can see the "Moorefield" but only for a brief moment. when I try to turn on the phone then it immediately disapears and repeat this process (Vibrate twice, long preiod doing nothing and still black screen, then vibrates again twice, repeat)
Any suggestion?
Thanks in advice
Seikushim said:
Hello
I was updating from a M version to another M verions. But I had to use the temporary recovery method.
This is what I was doing but didn't finish properly
I extracted and connect my zen2
Ran the unlock.bat
The phone entered the bootloader, flash his things and boot again but on the white screen
Then I had to hold power button 10s to turn it off and turn it on again
Entered the bootloadr by holding Power+Vol UP then to recovery.
At this time I just used the recovery as I usualy do, Wipe everything, cache, data, etc.
Connect to the PC, put the new UL-Z00A-WW-4.21.40.184-user.zip there and flash.
BUT now that comes the problem. I select the option to boot it after finish flashing.
So obviously I didnt finish the steps mentioned on the quote above.
I didnt ran the restore.bat before reboot into system and now All I see is black screen.
I've tryed some steps of those tutorials for briked phones but My computer can't see the device for long enough
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
I try to do those steps but I'm stuck on this part
My phone doesn't boot even on bootloader. It just vibrate twice and then nothing happens.
On my device manager I can see the "Moorefield" but only for a brief moment. when I try to turn on the phone then it immediately disapears and repeat this process (Vibrate twice, long preiod doing nothing and still black screen, then vibrates again twice, repeat)
Any suggestion?
Thanks in advice
Click to expand...
Click to collapse
you must post question in the thread you are trying instead of making new one. any ways. long press power button to shut down the device completely. then press power button and volume down button. as phone vibrates release power button but keep holding volume down button and wait till moorefield appears in device manager. now release the volume button then click begin download in xfstk.
if u have further question post in in above thread you are following to unbrick
sukhwant717 said:
you must post question in the thread you are trying instead of making new one. any ways. long press power button to shut down the device completely. then press power button and volume down button. as phone vibrates release power button but keep holding volume down button and wait till moorefield appears in device manager. now release the volume button then click begin download in xfstk.
if u have further question post in in above thread you are following to unbrick
Click to expand...
Click to collapse
I did it already and only shows up for a brief moment like I said and then disappears a second before the phone vibrate
help please D:
Seikushim said:
help please D:
Click to expand...
Click to collapse
any luck fixing? i got the same result, no screen or anything, two vibrations since yesterday
Sadly, no.
no fix for me yet...
Let me know if you find something
You have tô unbrick your phone. There are some tutorials in the forum
I am using the Z008D variant of the Zenfone 2.
I had bricked my phone 3 times and the guides that had helped me are:
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
https://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
I too had the same problem the first time I unbricked my phone. The moorefield device would show up briefly in device manager. It is stated in the guide that you had to press power+vol down when connecting the phone to use xFSTK. I googled and found that you had to actually press and hold the vol down button only and then connect the USB cable, then release it when the moorefield device is detected.
I have TWRP installed, and have managed to run it a few times. Now I cannot start TWRP at all.
From off, if I switch on, the following happens:
1) Screen with Samsung Galaxy A70 - Secured by Knox
2) 0.5 seconds later another screen, "this phone's bootloader is unlocked and it software integrity. .." and "press power key to continue..."
3) 5 seconds later, same screen as (1)
4) 3 seconds later, red letters "this phone is not running Samsung's official software"
5) 3 seconds later blank screen with "samsung" and then booting to android.
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it )
Click to expand...
Click to collapse
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
mobin22 said:
and then press power down button
Click to expand...
Click to collapse
Do you mean volume down?
Zilliman said:
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
Do you mean volume down?
Click to expand...
Click to collapse
Power off the device, plug into a pc, wait for it to start charge, hold vol up and power till it turns on. Wala boots to twrp. If you have magisk installed,you can use the reboot option within magisk.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
Click to expand...
Click to collapse
Samsung changed how to enter recovery on Android 11. Power off device, plug into pc, wait for it to charge, then hold vol up and power till it turns on. Alternatively, if you have magisk installed, use the reboot options within magisk.
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Zilliman said:
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Click to expand...
Click to collapse
That's because you're not installing it properly go back to my guide and follow it exactly and stop listening to these other people. I've been modding this device since it first came out with Android 9, I know every inch of this device. You're getting confused by what other people are telling you
MarvinMod said:
5- Press and hold vol down and power till the screen turns blank then immediately press and hold vol up. The device will reboot then land you in the twrp splash screen
Click to expand...
Click to collapse
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Zilliman said:
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Click to expand...
Click to collapse
After successful flash of recovery.tar, power and vol down to reboot, as soon as the phone screen goes blank, immediately release all keys and press and hold vol up. Must be as soon as screen goes blank. The device will then reboot twice and land you in twrp splash screen. You must hit vol down and power after successful flash then when screen blanks, vol up. If you miss this step, twrp will not hold and revert back to stock recovery.
Here is the notes I made today:
****************************************************************
INSTALL + START TWRP
phone is off
press up + dn
insert cable
go into download (press up)
ODIN 3.14 + AP:tar(vbmeta.img+twrp.img), auto reboot off, press upload
when it succeeds, press dn + pwr until it reboots
then quickly up + pwr until it starts (no need to hold down)
this starts in TWRP
from powered off
press pwr button
goes into twrp or android(system) -- depending on what was used last time
if we used reboot->system last time it will now **Always** go into system!
to go back into twrp:
switch off
power cable until charge
pwr + up until it starts
****************************************************************
The above means that you CANNOT go back to TWRP unless you have a cable and a PC near by.