Related
I'm still stuck on download mode in QPST and I really need help ASAP! Im also hard bricked WHICH MEANS i can't turn on the phone or go into download mode. The usb driver is PORT with qualcomm hs-usb qdloader 9008. Is there any files, any fastboot, any instructions to save my phone before I return the phone on Friday? PLEASE THE LG G3 COMMUNITY I NEED YOUR HELP! I'M BEGGING YOU. IS THERE A WAY TO BOOT IT UP AND FIX THE PARTITIONS OF THE PHONE. I tried sd method= didn't work, tried lgflashtool=no IMEI, I BASICALLY TRIED EVERYTHING I CAN TO FIX THIS. Please, please help me D: . Also there is no jtag near NYC and I don't want to send my phone away. SO help me fix my partitions PLZ
Many options for you. Scattered all over to try out here. Ya gotta read. I recommend lg flash tool and stock files. It is in lgg3root.com
BAD ASS G3
Tried that but I have no IMEI is null due to failed partition and can't go into bootloader mode
Proof I'm not joking and this phone is trolling me
Edit: the file was too big
http://imgur.com/OnIukxU
xmagiicsx said:
Tried that but I have no IMEI is null due to failed partition and can't go into bootloader mode
Proof I'm not joking and this phone is trolling me
Edit: the file was too big
http://imgur.com/OnIukxU
Click to expand...
Click to collapse
Have you tried the other flash tool? I'm not sure if it will see your phone in the state it is in but if it does it may not require your imei. It can be a pain on win 8 64 but it might work for you http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Is it normal for it to stop at 4% every time?
http://imgur.com/Ozn7ebB,1KqHpE2
http://imgur.com/Ozn7ebB,1KqHpE2#1
ThePagel said:
Have you tried the other flash tool? I'm not sure if it will see your phone in the state it is in but if it does it may not require your imei. It can be a pain on win 8 64 but it might work for you http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Click to expand...
Click to collapse
Ummmm is this normal?
http://i.imgur.com/5FmgGKB.png
xmagiicsx said:
Ummmm is this normal?
http://i.imgur.com/5FmgGKB.png
Click to expand...
Click to collapse
Did that happen after you hit start?
ThePagel said:
Did that happen after you hit start?
Click to expand...
Click to collapse
No it as before I hit start, I have no IMEI and files to boot lol. I think I need it to complete the full installation. Imma take an hour break and wait till people come on suggest more ways
xmagiicsx said:
Tried that but I have no IMEI is null due to failed partition and can't go into bootloader mode
Proof I'm not joking and this phone is trolling me
Edit: the file was too big
http://imgur.com/OnIukxU
Click to expand...
Click to collapse
I know for a fact that this works with it FUBAR. Or call for replacement.
BAD ASS G3
The only way I can boot up this phone now is to use QPST but I have no instructions nor files(.hex, .qcn, or .mbn) to boot up this phone. I need these files to retrieve my imei and my modem so I CAN BOOT THIS DAMN PHONE
xmagiicsx said:
The only way I can boot up this phone now is to use QPST but I have no instructions nor files(.hex, .qcn, or .mbn) to boot up this phone. I need these files to retrieve my imei and my modem so I CAN BOOT THIS DAMN PHONE
Click to expand...
Click to collapse
If I replace it, I'm going to be afraid that they can access through my stuff because the last thing before the phone turn off was backing up my stuff on nandroid and that passcode can be bypassed :x
Good luck
BAD ASS G3
I know you said you can't get into download mode but maybe try this. I made this guide for when I owned an L9. It worked for my G2 as well. Of course use the kdz for our phone.
http://androidforums.com/optimus-l9-all-things-root/792689-guide-unbrick-manual-update-updated.html
---------- Post added at 03:21 PM ---------- Previous post was at 02:52 PM ----------
Lg makes it damn hard to completely brick a phone. I've seen so many people resurrect their phones from some of the dumbest sh!t you could do. There's a way just have to find it. If the phone's recognized by adb then someone could dump the boot, recovery, downloadmode partions and you could flash them back. You can try all the unbricking guides. There is a way to fix these 99% of the time I promise, just don't give up.
Swizzle82 said:
I know you said you can't get into download mode but maybe try this. I made this guide for when I owned an L9. It worked for my G2 as well. Of course use the kdz for our phone.
http://androidforums.com/optimus-l9-all-things-root/792689-guide-unbrick-manual-update-updated.html
---------- Post added at 03:21 PM ---------- Previous post was at 02:52 PM ----------
Lg makes it damn hard to completely brick a phone. I've seen so many people resurrect their phones from some of the dumbest sh!t you could do. There's a way just have to find it. If the phone's recognized by adb then someone could dump the boot, recovery, downloadmode partions and you could flash them back. You can try all the unbricking guides. There is a way to fix these 99% of the time I promise, just don't give up.
Click to expand...
Click to collapse
He tried that tool already. Well it was a modified version of uptest that doesn't require all of the extra steps. I was doing some reading and it looks like most lg phones are capable of adb turned off in charging mode so that's a fantastic idea you have about adb. I have the full kdz dump I can upload the second I get home.
I'm trying it again(D851) but the driver is not downloading and the mod is requiring for a lgmobileDL.dll but it is missing
Been like this for ten minutes
http://imgur.com/mqpf6j9,pxizZ6f#0
http://imgur.com/mqpf6j9,pxizZ6f#1
Edit: I uninstall and reinstall it 3 times but the download driver is still in blank
xmagiicsx said:
I'm trying it again(D851) but the driver is not downloading and the mod is requiring for a lgmobileDL.dll but it is missing
Been like this for ten minutes
http://imgur.com/mqpf6j9,pxizZ6f#0
http://imgur.com/mqpf6j9,pxizZ6f#1
Edit: I uninstall and reinstall it 3 times but the download driver is still in blank
Click to expand...
Click to collapse
Is that the official lg suit? I can almost say for a fact that won't work for you.
No its not but I need the .dll files for this phone
xmagiicsx said:
No its not but I need the .dll files for this phone
Click to expand...
Click to collapse
That should have been linked with the .tot I am assuming that is the tot flash youre doing (never done it myself). But I do have the. Tot file and DLL at home if you can't find it.
ThePagel said:
That should have been linked with the .tot I am assuming that is the tot flash youre doing (never done it myself). But I do have the. Tot file and DLL at home if you can't find it.
Click to expand...
Click to collapse
Is it possible for you to extract it from the .kdz and dump the .bin file here
xmagiicsx said:
I'm trying it again(D851) but the driver is not downloading and the mod is requiring for a lgmobileDL.dll but it is missing
Been like this for ten minutes
http://imgur.com/mqpf6j9,pxizZ6f#0
http://imgur.com/mqpf6j9,pxizZ6f#1
Edit: I uninstall and reinstall it 3 times but the download driver is still in blank
Click to expand...
Click to collapse
If you already installed the drivers before you don't need to install them from the support tool.
So i basically ended up delting boot partition or something.My Lg g3 wont turn on now.I was trying to fix Boot verfication but ended into more of a mess.It wont go to download mode ( pluging Usb cable and presing Up button).My phone is recognised by my pc when i connect it.Previously i had rooted it.Start of all this mess was while trying to install a custom recover Twrp.Any fixes now or i goota get a Jtag.
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read page entirely
Thanks TheMadScientist420 for reply but I did not understand a thing plus link to tool is also not working.
Lemme say it again phone won't turn on go to download mode or recovery.
You cannlook the tool up straight on google its out there im at work now so i not near my comp or i could walk u through further down the page it talks about disasambling the mother bord slightly kinda like jtag just not soldiering what ure doing is resetting the. Boot partitions to a factory blank state then ure using ure restore tot file and extraction stock partitions and pushing them to previously stated blank partitions on phone
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
It took me like 5 or 6 tries to short the pins out to do it
What exactly is the tools name btw? one i found requires me to pay to unzip it.
its on androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Bout half way down are the files u need
I got lg g3 D855 BTW thanks.
babapera said:
I got lg g3 D855 BTW thanks.
Click to expand...
Click to collapse
Could you fix your problem?
re
Sidz4u said:
Could you fix your problem?
Click to expand...
Click to collapse
I have yet to try it, iwill post my results don't know if it will work.I will have a tech guy help me with opening part.
babapera said:
I have yet to try it, iwill post my results don't know if it will work.I will have a tech guy help me with opening part.
Click to expand...
Click to collapse
i am having the same problem since this morning.
Phone is bootlooping again and again. Cant enter recovery/download mode.
but some how just now managed to get into download mode, flashed stock kdz, it installed completely (100%), but again when it rebooted after the flash, same boot loops have started and am not able to get through.
this problem is really weird.
Any clue on how to check if i have a Qualcom port or LG port?
You have to force it into the qualcom port with the pin shorting guide
---------- Post added at 01:10 PM ---------- Previous post was at 12:40 PM ----------
Again i stand corrected the g2 bad a ms dos script that pushed the partitions on the g3 wilzcracker aparntly pushes them so just follow the guide it works
Sidz4u said:
i am having the same problem since this morning.
Phone is bootlooping again and again. Cant enter recovery/download mode.
but some how just now managed to get into download mode, flashed stock kdz, it installed completely (100%), but again when it rebooted after the flash, same boot loops have started and am not able to get through.
this problem is really weird.
Any clue on how to check if i have a Qualcom port or LG port?
Click to expand...
Click to collapse
Not really
On your pc goto device manager youll see comms and ports thats wher youll see lg or qusb bulk 9008
my phones back online thanks mate. its working again
babapera said:
my phones back online thanks mate. its working again
Click to expand...
Click to collapse
what all did u do ??
just follow the guide
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
i followed the link but confused with their description on the pin shorting ..[.i cant find the specific pins to short.... please how did u short it......and which pins did u short
A small wire and you have to diasmble to get to the shorting point
TheMadScientist420 said:
A small wire and you have to diasmble to get to the shorting point
Click to expand...
Click to collapse
I am in India.. and we don't have .tot here. We use .kdz
Last I was on v21a.. fulmics rom.
Where should I get the tot files from ?
U can use kdz. http://forum.xda-developers.com/showthread.php?t=2785089
I was on CyanogenMod 12 and wanted to upgrade using the LG Fash Tool with the Marshmellow kdz. But apparently this method is far from beeing safe. On my computer setup (Windows 10) it doesnt seem to finish the upgrade procedure. I am stuck at 11% with 45 minutes already passed. The progress bar on my phone went from 1% to 2% and then back to 1% again. Before I tried to exit download mode which also didnt work. So what can I do now? Is my phone bricked because LG Flash Tool doesnt work correctly?
Edit:
Now I restarted the update procedure and I am stuck at 12% after 20 minutes, so how long is that supposed to take? I am used to Samsung where it takes seconds to upgrade the firmware.
Edit2:
I left it alone, after 50 minutes its a 15% on the computer but at 2% on the phone display, is this normal?!?!
No not normal. Appears to be a problem relating to Win 10. I had the same and fortunately I have a Laptop with Win 8.1 so was able to do the upgrade. I suggest that you try and get access to a PC/Laptop running Win 7/8 or 8.1 and you will resurrect you phone.
Stransky
Sent from my iPad using Tapatalk
I am facing same problem on Windows 10, flash is stuck at 12% since 1 hr. Can you please confirm if windows 8/7 fixed your problem?
Hi, i get my bricked g3 (9008 qhusb) repaired with win10 64 bit two days ago.
So i see no reason why win 7 or 8 should could be work with tools that win10 can not handle.
Try with right click compatibility and start as win7 and admin. Every tool works with that.
To unbrick it was possible to start tools from 2002.
---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------
kapilgreat said:
I am facing same problem on Windows 10, flash is stuck at 12% since 1 hr. Can you please confirm if windows 8/7 fixed your problem?
Click to expand...
Click to collapse
at 12 % the tool is trying to boot the DL mode.
But it looks there are Probs with your laf partition.
Is a recovery on this phone in which you couls boot?
If not try lg flash tool. this one with port 41 to use.
---------- Post added at 11:49 AM ---------- Previous post was at 11:40 AM ----------
Try the repair function with the lg mobile tool. If that doenst work, you get soft bricked.
But no trouble, i can post you tools to unbrick.
konsolen said:
Hi, i get my bricked g3 (9008 qhusb) repaired with win10 64 bit two days ago.
So i see no reason why win 7 or 8 should could be work with tools that win10 can not handle.
Try with right click compatibility and start as win7 and admin. Every tool works with that.
To unbrick it was possible to start tools from 2002.
---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------
at 12 % the tool is trying to boot the DL mode.
But it looks there are Probs with your laf partition.
Is a recovery on this phone in which you couls boot?
If not try lg flash tool. this one with port 41 to use.
---------- Post added at 11:49 AM ---------- Previous post was at 11:40 AM ----------
Try the repair function with the lg mobile tool. If that doenst work, you get soft bricked.
But no trouble, i can post you tools to unbrick.
Click to expand...
Click to collapse
my phone is soft brick. It is showing firmware upgrade screen when phone is turned on.
you tried with lg flash tool? the one which used port 41 and tot file?
konsolen said:
you tried with lg flash tool? the one which used port 41 and tot file?
Click to expand...
Click to collapse
yes i tried lg flash tool with tot file. it is also failing after 11% with error:
20:17:26] RX Timeout : 5000 seconds
[20:17:26] LAF_Packet Error, Error reason is 0
[20:17:26] We can't communicate with Phone[WRTE_Packet]
I am using KitKAt tot file, not able to file .tot file for lollipop. Not sure if this is the reason. I was on cloudy g3 2.5.
I able use flash tool 2014 to flash MM.kdz.
Many time failed to flash , and I search , for MM setting phone mode must use CS emergency not DIAG.
After that I finished my flashing and get MM.
Hope this help.
fOxunO said:
I able use flash tool 2014 to flash MM.kdz.
Many time failed to flash , and I search , for MM setting phone mode must use CS emergency not DIAG.
After that I finished my flashing and get MM.
Hope this help.
Click to expand...
Click to collapse
Issue is fixed after i switched to Win 7. I managed to install stock MM.
perfect. congrats!
Hello guys,
I need your help on a problem. I've been away from Android development and I can not find a workaround for this. The problem is LG G3 d855 is stuck at boot screen and the led sensors lighting up. Here's what caused the problem:
Today I wanted to upgrade my phone to stock 6.0 to try. I installed a stock 6.0.kdz file by LG Flash Tool 2014. But somehow at installation it said can not connect to server, so I quit the application which I shouldn't have done so. I should've just sit and wait. Anyway, then I lost Download Mode and phone wasn't booting up at all. When I tried to boot up I got the error "boot verification Fail -cause MISMATCH_SIG_LEN". Somehow I managed LG Flash Tool 2014 to see my phone as Qualcomm device and started to install again (it took me briefly 3 hours if anyone ever face some problem or need help, I'll be posting a guide about it) the server error popped up again and I just ignored it and boy it was loading both on my phone and on my computer as well!
However, on the phone the process stopped at 4% and on pc it stopped at 13%. Then I got an error saying something like unexpected error. I tried retry countless times but it didn't work. So I had to say exit and quit the application but somehow, as I disconnected frustrated the phone started to boot, a little droid came up as if it came after each update then the normal screen.
I was quite happy because even the led started to beam up so I was hopeful it would start but however it's stuck now. I tried going into download mode and now I get "boot verification Fail -cause MISMATCH_SIG_LEN" error on there and it just restarts again.
I searched for hours and hours to find a workaround and I'm really desperate! I know if the screen boots up at least, it can not be so bad to fix. Please someone help me!
update:
somehow I can get my pc to see the device as qualcomm hs-usb qdloader 9008 (COM3) but BoardDiag now says "device was not found in dload trying flash programmer"
and still no answer from anyone.. I am still trying please someone help me out...
tomasita111 said:
update:
somehow I can get my pc to see the device as qualcomm hs-usb qdloader 9008 (COM3) but BoardDiag now says "device was not found in dload trying flash programmer"
and still no answer from anyone.. I am still trying please someone help me out...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/bricked-lg-g3-owner-qualcomm-9008-mode-t3362361
Try this i am not sure it work or not...
Anik49 said:
http://forum.xda-developers.com/lg-g3/general/bricked-lg-g3-owner-qualcomm-9008-mode-t3362361
Try this i am not sure it work or not...
Click to expand...
Click to collapse
nope that doesn't work either... also when my phone is on boot logo constantly my pc sees the device as LGE AndroidNet USB Serial Port. Any suggestions?
tomasita111 said:
nope that doesn't work either... also when my phone is on boot logo constantly my pc sees the device as LGE AndroidNet USB Serial Port. Any suggestions?
Click to expand...
Click to collapse
I am also same situation but i can enter download mode try to enter download mode.....turn off your phone just press volume up and connect cable....try it...
---------- Post added at 10:39 PM ---------- Previous post was at 10:17 PM ----------
tomasita111 said:
nope that doesn't work either... also when my phone is on boot logo constantly my pc sees the device as LGE AndroidNet USB Serial Port. Any suggestions?
Click to expand...
Click to collapse
What happend? you can enter fatboot mode or not.
http://m.blog.naver.com/kangmincraft/220626785379....try it but it's for f460 don't use any file from their.....
Anik49 said:
I am also same situation but i can enter download mode try to enter download mode.....turn off your phone just press volume up and connect cable....try it...
---------- Post added at 10:39 PM ---------- Previous post was at 10:17 PM ----------
What happend? you can enter fatboot mode or not.
http://m.blog.naver.com/kangmincraft/220626785379....try it but it's for f460 don't use any file from their.....
Click to expand...
Click to collapse
LGFlashTool fails, so does LGMobile Support Tool.. I am stuck on download mode right now, weird huh?
tomasita111 said:
LGFlashTool fails, so does LGMobile Support Tool.. I am stuck on download mode right now, weird huh?
Click to expand...
Click to collapse
If you are on MM you have to use lg up to flash kdz...choose upgrade option in lg up select kdz....than select refurbish and flash.....
---------- Post added at 01:42 AM ---------- Previous post was at 01:36 AM ----------
Anik49 said:
If you are on MM you have to use lg up to flash kdz...choose upgrade option in lg up select kdz....than select refurbish and flash.....
Click to expand...
Click to collapse
Also lg flash tool shows error but it's not a problem. Just ignore it or do nothing flash tool do it's work. Lg flashtool error is a known issue.
Anik49 said:
If you are on MM you have to use lg up to flash kdz...choose upgrade option in lg up select kdz....than select refurbish and flash.....
---------- Post added at 01:42 AM ---------- Previous post was at 01:36 AM ----------
Also lg flash tool shows error but it's not a problem. Just ignore it or do nothing flash tool do it's work. Lg flashtool error is a known issue.
Click to expand...
Click to collapse
no the error I'm getting isn't server error, it gives an error and without even me clicking ok or retry it just stops..
It's been 36 hours now. And still no luck. Dunno what to do at all..
tomasita111 said:
It's been 36 hours now. And still no luck. Dunno what to do at all..
Click to expand...
Click to collapse
You tried lg up... Try to use lg up for flash
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Stiffmeistro said:
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Click to expand...
Click to collapse
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Fluffywolf said:
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Click to expand...
Click to collapse
engmia said:
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
Click to expand...
Click to collapse
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Stiffmeistro said:
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Click to expand...
Click to collapse
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
1SouthernCanuck said:
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
Click to expand...
Click to collapse
Just read over the thread, it's what it's here for.
Stiffmeistro said:
i dont have time to explained what i did but it works
Click to expand...
Click to collapse
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
exactly
leandeganis said:
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
Click to expand...
Click to collapse
Exactly, here I am running around in circles over this BOOST Stylo 2, just got it with MM 6.0.1 out of the box 2 days ago. I caught the 454.4mb update it has been trying to do! Got that baby downloaded! 1.02gb unzipped and renamed to kdz. Got a script for Terminal that will replace Kingroot's temp root with SuperSU but I am not going to attempt any further until I know LGUP will recognize and flash my .zip the bas****s deem not worth enough to put up for download on LG's site!
I got LGUP to recognize it in download mode, reads out LGLS775 but still says it cannot open it...............
His info on how he got it to work would prolly have solved this dillema..............
oh well
zach
ok had a LG G3 that's done this- as long as you can get download mode it should recover, YOU need to use the LG mobile support tool from LG website ( LG UP sees phone as unknown model ) run LG mobile Support tool and in option choose UPGRADE RECOVERY . follow instructions and allow to start process, it took 57 minutes to repair my phone - it will seem frozen anywhere from 0% to about 22% JUST WAIT IT OUT!! lg up / twrp flashes in 5 to 10 mins -- the LG m.s.t writes block by block and takes 1 hour +
so hints and info took 3 goes to find and start upgrade recovery - error on a couple of attempts. phone seems frozen around 10% and 15% of firmware upload -- go make a coffee drink it, go pee then come back and worry! A watched pot never boils!....
Stiffmeistro said:
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
Click to expand...
Click to collapse
please tell me how to solved your problem my D682 deivce is always opening on recovery but there is no recovery menu just android robot
I have same issue as op described .After unbrick my g3 f400s by short wire method i get error at 94% in tot method and red screen show these word error wrong qem =0 .After remove and put battery again mobile runing but without baseband and null imei .Plz help i need really help
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
---------- Post added at 03:33 AM ---------- Previous post was at 03:22 AM ----------
Sedado77 said:
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
Click to expand...
Click to collapse
It didn't. It's EVEN MORE broken :'(
I figured out how to get my PC to recognize my D851. Apparently all the LG software didn't like how many COM ports I have. As soon as I unplugged everything else from my PC, the software worked. In this case, it was LG Flash Tool 2014, but I couldn't get any of them to work before.
Try running LGUP as Admin!!! For me it worked!
Try running LGUP as Admin!!! For me it worked!
Thankx Bro Its Work
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Hope someone can help me. I flashed a rom for a d855, d855g30 I think, and although I can access download mode all aps for flashing fail saying it's the wrong model number. Even the generic DLL file cant trick it. It still starts booting the rom but boot loops before entering. I no longer have twrp and when I try to do safe mode or factory reset I get a boot validation error or something similar. Just seem to be stuck. Im using a VS985.
One cause of LGUP "UNKNOWN"
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11. After installing LGUP, make sure that the "model" subdirectory in the LGUP program directory is the same number as the processor in your phone, in my case c:\Program Files (x86)\LG Electronics\LGUP\model\8974 (was 8994 with the "LGUP for G3" I downloaded).
HTH