LG G4 Brick Unlock Bootloader - G4 Q&A, Help & Troubleshooting

Hi everyone, yesterday i follow the Guide "Install Bootloader V20a : Bootloader V20a" to update my rom to "7 HD 7.4 H815"
I download all the files in "Install Bootloader V20a : Bootloader V20a" and restart the phone.
it is stuck on the boot screen , which displays at the top the message " bootloader unlock" .
you can only get into download mode because it does not enter into recovery more ( I had made backup with twpr and I all about micro sd but I can not install the twpr )
I tried to flash with " tools lg 2014" is 20a.kdz that older versions but not flash .
I tried LGUP it says " unknow device"
Someone can help me ?

maelever said:
Hi everyone, yesterday i follow the Guide "Install Bootloader V20a : Bootloader V20a" to update my rom to "7 HD 7.4 H815"
I download all the files in "Install Bootloader V20a : Bootloader V20a" and restart the phone.
it is stuck on the boot screen , which displays at the top the message " bootloader unlock" .
you can only get into download mode because it does not enter into recovery more ( I had made backup with twpr and I all about micro sd but I can not install the twpr )
I tried to flash with " tools lg 2014" is 20a.kdz that older versions but not flash .
I tried LGUP it says " unknow device"
Someone can help me ?
Click to expand...
Click to collapse
Take battery out, put it back in. Now hold volume down and power until you see LG logo
Release the power button for a second while still holding volume down. Press the power button again while still holding volume down.
Should get you in to factory reset screen no?

maelever said:
Hi everyone, yesterday i follow the Guide "Install Bootloader V20a : Bootloader V20a" to update my rom to "7 HD 7.4 H815"
I download all the files in "Install Bootloader V20a : Bootloader V20a" and restart the phone.
it is stuck on the boot screen , which displays at the top the message " bootloader unlock" .
you can only get into download mode because it does not enter into recovery more ( I had made backup with twpr and I all about micro sd but I can not install the twpr )
I tried to flash with " tools lg 2014" is 20a.kdz that older versions but not flash .
I tried LGUP it says " unknow device"
Someone can help me ?
Click to expand...
Click to collapse
I did the same thing yesterday, mine also said unknown device. I reopened the lgup and it worked from there. Hope that helps.

ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.

Meakii said:
Take battery out, put it back in. Now hold volume down and power until you see LG logo
Release the power button for a second while still holding volume down. Press the power button again while still holding volume down.
Should get you in to factory reset screen no?
Click to expand...
Click to collapse
first No, now yes . I use a tool of LG to restore recovery from download mode and after I install twpr and restore my backup. Now it work but 1 day of hate
thanks all

Related

Error message in Recovery Mode

HI..
i first tried to root my asus Zenfone 2 .. installed a custom rom 12.1 for cynogen mod and first there was no network for sim .. then somehow fixing all this i wiped out my data without backup in recovery mode .. and when i tried to install the stock rom .., my phone is giving error message whenever i enter recovery mode.
(also i have tried hard reset like volume up +power button when in theres a error message in recovey mode ) It doesnt work for me or maybe i am not doing it the right way.
Basically i think its BRICKED +an error message in recovery mode .
Will it ever work again ?also please tell me how to get my phone work ..will be really greatful .
Please HELP !
How to Enter "Recovery Mode" on Asus Zenfone 2
Turn Off your Zenfone 2
Hold Power button + Volume up
When the phone is vibrating release the Power button
Then the Display change like this
You can select "Normal Boot" or "Recovery Mode" by pressing Volume Up/Down, to enter Recovery choose "Recovery Mode"
Then you will see sleep Android Robot, Press Power button and Volume up, after one second release the Volume up
You will see Asus Zenfone 2 Recovery Mode
after that follow these steps and BOOM BAM !! I DID IT
Download and Install ADB and drivers on your PC.
Download the latest Stock ROM from the Asus website by visiting the following links. If your device got bricked after a recent OTA software update, wait a few days while Asus uploads the latest Stock ROM. On the page below, select Android as the OS and then expand the Firmware section. For non WW devices, please check your regional Asus website for the download details.
Zenfone ZE551ML Stock ROM
Zenfone ZE550ML Stock ROM
Copy the downloaded Stock ROM to the folder where you installed ADB (Generally C://adb)
In power off state, press and hold the Volume Up key and then press and hold the Power Key till the phone vibrates. Release the power key at vibration, but keep pressing the Volume Up key. Wait for the phone to boot into fastboot mode.
In the fastboot mode, keep pressing the Volume Down key till you see Recovery Mode. Press Power Key to select it.
In recovery mode, select Apply update from ADB.
Connect your phone to the PC and open the ADB folder. Right click while holding down the shift key and choose Open command window here.
Pass the following command in ADB. Replace file.zip with the name of Stock ROM zip (eg: UL-Z00A-WW-2.19.40.22-user.zip) downloaded in step 2.
adb sideload file.zip
Wait for the process to complete as it will take a couple of minutes.
Reboot the phone when it is all done and hopefully your Zenfone 2 will be boot up fine, alive and working again.
no recovery menu - phone restarts everytime i try to enter recovery
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
then, i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery menu the phone restarts and goes to fastboot menu.
please help.
dip_anker said:
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
then, i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery menu the phone restarts and goes to fastboot menu.
please help.
Click to expand...
Click to collapse
Does the zenfone2 have a fastboot mode to flash the firmware manually because flashing Ota updates bricks if you never unrooted you phone. So you should just flash the firmware you were already on then unroot then flash the Ota update
DROID_4_UsEr said:
Does the zenfone2 have a fastboot mode to flash the firmware manually because flashing Ota updates bricks if you never unrooted you phone. So you should just flash the firmware you were already on then unroot then flash the Ota update
Click to expand...
Click to collapse
adb is not able to detect my phone. is there any other way to flash the phone ?
and i am just a bit curious to know if its possible to directly flash the phone with CM12.1 without having to go through all those steps (installing the older version and unrooting and installing the OTA) ?
---------- Post added at 05:14 PM ---------- Previous post was at 05:01 PM ----------
and how can i flash the original rom when adb doesn't detect my phone ??

stuck on LG logo after flash twrp recovery

Hi
here what i did before problem happen
Phone is locked bootloader + Rooted
Flash Marshmallow via FF
Phone is unlocked bootloader + No root
Flash TWRP Recovery via fastboot running this command "fastboot boot twrp-2.8.7.0-h815.img"
then i see TWRP recovery and after reboot phone it's stuck on lg logo, recovery not working, on device manager i see LGE AndroidNet USB Serial port,
only download mode working.
any help to get it back?
dxbi9100 said:
Hi
here what i did before problem happen
Phone is locked bootloader + Rooted
Flash Marshmallow via FF
Phone is unlocked bootloader + No root
Flash TWRP Recovery via fastboot running this command "fastboot boot twrp-2.8.7.0-h815.img"
then i see TWRP recovery and after reboot phone it's stuck on lg logo, recovery not working, on device manager i see LGE AndroidNet USB Serial port,
only download mode working.
any help to get it back?
Click to expand...
Click to collapse
The command you have used is not a flash, it is only a boot into the twrp recovery, twrp will work than,
but nothing is flashed and so after reboot ther is no twrp.
Shut down phone, connect it to your pc, put it on, when adp is detected enter : adb reboot bootloader
than flash/boot into twrp and reflash
Have you tried a fac reset/wipe?
For Hardware Reset:
turn off the device
press and hold the power and the vol- key
release power key when the lg logo is displayed (holding the vol - key)
immediately press power key (you should still press the Vol - button)
when in the factory reset menu folloe the onscreen instrucions to wipe it
fire3d said:
The command you have used is not a flash, it is only a boot into the twrp recovery, twrp will work than,
but nothing is flashed and so after reboot ther is no twrp.
Shut down phone, connect it to your pc, put it on, when adp is detected enter : adb reboot bootloader
than flash/boot into twrp and reflash
Have you tried a fac reset/wipe?
For Hardware Reset:
turn off the device
press and hold the power and the vol- key
release power key when the lg logo is displayed (holding the vol - key)
immediately press power key (you should still press the Vol - button)
when in the factory reset menu folloe the onscreen instrucions to wipe it
Click to expand...
Click to collapse
tried to monitor device manager to detect adp noting update just see LGE AndroidNet USB Serial Port.
Hardware Reset working fine i do full wipe but problem not solved still stuck on LG logo after reboot.
I really appreciate any help you can provide
dxbi9100 said:
tried to monitor device manager to detect adp noting update just see LGE AndroidNet USB Serial Port.
Hardware Reset working fine i do full wipe but problem not solved still stuck on LG logo after reboot.
I really appreciate any help you can provide
Click to expand...
Click to collapse
rollback
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
shudoha said:
rollback
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click to expand...
Click to collapse
As you can see from my post am already upgrade my phone to Marshmallow and i see there is no way to downgrade or use lg flash tool.
dxbi9100 said:
As you can see from my post am already upgrade my phone to Marshmallow and i see there is no way to downgrade or use lg flash tool.
Click to expand...
Click to collapse
i know i have the same problem . im blocked in dowload mode . i cant do nothing
This might sound stupid so don't shout at me but is there no way you can dirty flash the lollipop version also try using twrp version 2.8.6.1 because the latest version caused me problems , good luck...

G4 stuck on boot loop (maybe wrong SuperSu, no download mode)

Hello everyone i tryed to search similar issues in the forum but i only found this thread without solution: http://forum.xda-developers.com/g4/help/h815-stuck-bootloop-download-mode-t3235362
My G4 stucks on boot loop and i cannot reach bootloader mode or recovery.
I updated to M then i decided to unlock the bootloader.
Then I try to install twrp. Via fastboot flash command twrp doesn't seem to get installed. So i try to boot in twrp and then install the img to the recovery partition. All seemed to go fine. When i try to reboot to recovery twrp ask me to root the device. Why not? I leave twrp installs superSu (I think this was my mistake). Now I've a continuous bootloop, even if I simply plug it to the charger. Vol down + Power buttons neither vol up + power doesn't work.
Sorry for bad english
Yep.. You shouldn't have selected the built in version..
Copy an updated SuperSU.zip file onto a spare SD Card and slot it into the Phone.
Reboot into TWRP and install the new SuperSU.zip from the SDCard..
Are you able to boot TWRP? Of yes, take Hostilians advice.
Are you unable to boot TWRP? Enter download mode ( unplug device-> hold down Volume + -> plug device) and install a fresh OS using LGUP.
eldriSs said:
Are you able to boot TWRP? Of yes, take Hostilians advice.
Are you unable to boot TWRP? Enter download mode ( unplug device-> hold down Volume + -> plug device) and install a fresh OS using LGUP.
Click to expand...
Click to collapse
Hi
I have same situation. After SuperSu zip installation my G4 stuck on boot loop. Can somebody explain a little bit this procedure? I don't know how install a fresh OS and don't know what is a LGUP.
I found another link over Internet but...I'm not sure: rootmygalaxy.net/unbrick-lg-g4-with-lg-flash-tool
I don't have any way to enter into TWRP because as I say G4 is stucked and adb command don't work.
Any help appreciated
rubendob said:
Hi
I have same situation. After SuperSu zip installation my G4 stuck on boot loop. Can somebody explain a little bit this procedure? I don't know how install a fresh OS and don't know what is a LGUP.
I found another link over Internet but...I'm not sure: rootmygalaxy.net/unbrick-lg-g4-with-lg-flash-tool
I don't have any way to enter into TWRP because as I say G4 is stucked and adb command don't work.
Any help appreciated
Click to expand...
Click to collapse
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Follow this instructions here... although it doesn't tell you how to use it with your device in download mode! Anyways... is very easy to do it.
First install LGUP_8994_DLL_Ver_0_0_3_23 them LGUP. Plug in your device (you will notice that it doesn`t recognize your device, no worries) Unplug device, shut down, hold Volume + and plug device. It will enter download mode. Now go to LGUP click upgrade and choose your .kdz. Easy.
Cheers!
eldriSs said:
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Follow this instructions here... although it doesn't tell you how to use it with your device in download mode! Anyways... is very easy to do it.
First install LGUP_8994_DLL_Ver_0_0_3_23 them LGUP. Plug in your device (you will notice that it doesn`t recognize your device, no worries) Unplug device, shut down, hold Volume + and plug device. It will enter download mode. Now go to LGUP click upgrade and choose your .kdz. Easy.
Cheers!
Click to expand...
Click to collapse
Hi
I didn't have to do it exactly this way. My phone was stucked in boot loader (black screen lg logo) and simply connected by usb to my windows. LGUP detected without extra actions and then I refurbished it with a kdz file.
Hope it helps someone
Thanks!

somebody would help me to unlock bootloader & install cwm?i got 5 times bootloop

Can anyone help me?the 1st attemp of my unlock bootlader was succesfull but it end to softbrick because i put the wrong .img file..then i flash new ftf file 5.1.1
And try to do it too..failed..it says on minimal adb,device already roofed..then i flash 4.3.3 ftf,also bring to failure,same word...the last time i try to unlock also failed,said i already rooted..what the problem..somebody please2 help me..
Sony t2 ultra d5303,malaysia...
jebat_durhaka said:
Can anyone help me?the 1st attemp of my unlock bootlader was succesfull but it end to softbrick because i put the wrong .img file..then i flash new ftf file 5.1.1
And try to do it too..failed..it says on minimal adb,device already roofed..then i flash 4.3.3 ftf,also bring to failure,same word...the last time i try to unlock also failed,said i already rooted..what the problem..somebody please2 help me..
Sony t2 ultra d5303,malaysia...
Click to expand...
Click to collapse
First of all you need to know your device's bootloder is locked or unlocked for that type *#*#7378423#*#* in dial pad then go to service info >configuration and check for bootloder unlock allow
If it say yes then it's unlock
If it says no then it is locked
Do as follow for unlocking the bootloder
You need your device's IMEI number and a password for unlocking your bootloder
You can get your password by following link
Do step by step
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
1)switch off your device and open flashtool(download from following link)
2)select the unlock bootloder and connect your phone with flash mode by keep pressing vol. Down button and connect the cable LED light will turn green and then it will off
3)enter Your device's IMEI number and the password you got from Sony
4)click on unlock
Now your bootloder is unlocked so now can install custom recovery like XZdualrecovery,TWRP,CWM (unfortunately CWM is not supported in 5.1.1)
For installation of recovery you need to download full Rom from Xperifrim or other source and convert it into Ftf file
You need 1) kernel which have recovery pre-installed like doomlord's kernal for D5303 device for Android 4.3
2)For recovery which work with it just download latest version of XZdualrecovery for T2 ultra from thread and download the Release file (there are 2 file which are located there one is release and second is installer)
Download it on phone and move it on place whare you can find it easily
1) Now switch off your phone open flashtool
2) select flash sign and select fastboot mode
3) Now connect your phone with computer in fastboot mode by keep pressing vol.up button and connect the cable and LED light will turn blue
4)select doomlord's kernel file for flashing (it'll be on img format so select img from file type)
And flash it
5)Now disconnect your phone and boot it. When Sony logo appear and then keep pressing vol.down button alternatively it will boot you to CWM recovery
Now touch is not working... You can move upper option by volume Up button and downward option by volume down button for selecting the option press power button
Select install >install from SD card or external SD(where you placed a file)
Select flash and recovery will install then for back to exit there is (/) sign which can bring you to previous menu then exit from recovery by pressing vol.up button and power button holding together until it vibrate 3 times now your phone is power offed
6)Now click on flash button on flashtool and select flash mode
Then choose your latest 5.1.1 rom and now do as instruction or your data will lost
1) first you choosed a rom to flash now it will show a dialogue box that how many files are in that rom for flash now on right top you have 2 check box ( data and cache) uncheck both of them.
2) under that you have Exclude box which have check boxes too
Now check all boxes(system,some other things) but make sure only kernal remain uncheck
Now click on flash button
It will ask for connect your phone in flash mode by holding vol.down button and connect the cable
Now it will flash only kernal file all other files will remain same
Disconnect your phone and boot it until Sony logo appear and keep pressing vol.down button alternatively .... It will boot to TWRP recovery which is Easy to use and touch is also working now for get back to normal boot just select last option reboot and it will your
(while you want to enter into recovery keep pressing vol down button alternatively until LED blink green or some other colour.after it blinked you can't boot to recovery)
Hit thanks button if this helped you... And ask if you stuck at somewhere
This was simple tutorial and you are doing this all at your own risk I am not responsible for any damage of your device.
If it says bootloader unlock allowed YES then you can unlock it and use custom roms if it says bootloader unlock allowed NO there is nothing you can do to change it and you can only use stock or stock based roms if you won't or can't unlock bootloader root is still available and so is recovery

help:Asus bootloop

I was on cm-13.0-20161205-NIGHTLY-Z00A
and I have upgrade bootloader before flash cm13
Now ,
I was trying to flash CleanSTOCK-MM-v3.4+ZenKernel-Z00A
wiping everyting (system-data-internal stograge..)
and flashing from SD card
after falshing phone going to have loop of restart on asus screen
and sometime it automaticlly going to twpr
if i reflash cm-13.0-20161205-NIGHTLY-Z00A it works!!!
i can go to twpr and bootloader
What should I do to flash cleanstock??
download the file from the link below. extract it and run "Run_Tool.bat" . put phone in fastboot mode. now select option to flash mm boot loader. after finish the process. boot into recovery mode and sideload latest MM from asus website.
https://drive.google.com/open?id=0B72QQTXqZSRwN3lOTzFmRVJPbjA
Note you may see an error while entering recovery mode 'android logo with error sign'. if you see that press and hold power button immediately click volume plus button then release power button you will enter recovery

Categories

Resources