Hello everyone,
I have recently tried rooting my LG G3. I have tried LG One Click Root and Stump, to no effect.
Recently I tried PurpleDrake and I got the message:
*** ERROR: Your phone is not running a compatible software version. No vulnerable mode detected, rebooting phone, we tried to temproot you, and it didn't work, This phone isn't vulnerable, it would appear, Please post on XDA with your phone model, carrier, and SW version in the PurpleDrake thread and someone will take a look.
Your phone has been rebooted back to normal systemmode, no changes have been made, Thanks for trying! ****
Android Version => 5.0
Phone Model => LG-D855
sw_version=> v20t-EUR-XX
I'm really a noob at this, so any kind of help would be appreciated!
I find that the method discussed in the thread titled "Newest Root Method for LG devices" by digital-bug consistently works for every D855 firmware version (including yours). He lists there two methods. Try the first option using the "one-click script".
jamersss said:
I find that the method discussed in the thread titled "Newest Root Method for LG devices" by digital-bug consistently works for every D855 firmware version (including yours). He lists there two methods. Try the first option using the "one-click script".
Click to expand...
Click to collapse
Woow, it really worked! thank you so much! (I feel like such a dummy now )
Congrats
Related
Lg P930 LTE I bricked my phone?
hi guys
i tried to flash my p930 but now I'm stacked with "LG Optimus LTE" custom logo. When i use KDZ_FW_UPD.exe i always have the same error line in the program like
Model Dll Msg Not found2004,
my problem is i don't have any original backup
can you help me guys?
thanks
sorry for my english
i tried this method
"" Please try KDZ_FW_UPD.exe instead of UpTestEX_mod2_marwin.exe.
1)install the software below:
msxml.msi
LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3. 6.exe
B2CAppSetup.exe (This one will automatically run LG updating after installation)
2)Quit LG updating program.
3)Run "Windows Enabler.exe", a small icon will display on your computer's right-bottom corner,click it, it will enable KDZ_FW_UPD.exe's buttons.
4)Press volume+ and power botton when you phone is off to enter "Download Mode", connect the phone with your computer.
Run KDZ_FW_UPD.exe, Choose:
type:3GQCT
phonemode:CS_EMERGENCY
and select your rom:LU620128_00.kdz (version 128 rom)
Click "launch software update"
Flash begins, please be patient, your phone will automatically reboot when the progress reaches 94, then shortly, it will reach 100, all done."
I don't understand why you guys keep using the LU6200 kdz to try to unbrick your P930 or where you're finding the forum post that is telling you to do this, but it is not meant for our phone. In fact, it is probably what is ****ing up your phones. There is literally only one good unbricking guide for the P930 and it's right here on the front page in LG Nitro General Discussion by Machzelet. It's an updated version of my old unbricking guide that doesn't work anymore due to updates to the LG update tool. You might have permabricked your phone unless you can still get into download mode. I suggest reading the whole thread I just linked you to and don't even follow the first post. Find the posts about the Nitro .TOT file and the LG flasher tool and see if you can flash yourself back to a working phone that way. If you have any questions, ask them in that thread. Having 100 different unbricking threads isn't helpful.
Malnilion said:
I don't understand why you guys keep using the LU6200 kdz to try to unbrick your P930 or where you're finding the forum post that is telling you to do this, but it is not meant for our phone. In fact, it is probably what is ****ing up your phones. There is literally only one good unbricking guide for the P930 and it's right here on the front page in LG Nitro General Discussion by Machzelet. It's an updated version of my old unbricking guide that doesn't work anymore due to updates to the LG update tool. You might have permabricked your phone unless you can still get into download mode. I suggest reading the whole thread I just linked you to and don't even follow the first post. Find the posts about the Nitro .TOT file and the LG flasher tool and see if you can flash yourself back to a working phone that way. If you have any questions, ask them in that thread. Having 100 different unbricking threads isn't helpful.
Click to expand...
Click to collapse
i can entry in download mode
I followed all the step from guide
everthing was ok ok but the phone is still stucked with the logo
i'll atache the logo file also lg logo. jpg
thanks
please tell me what i'm doing wrong. maybe because the batteryy is almoust empty? but even with a power cable is the same thing
maybe it's for cdma version?
because mine is gsm from bell canada
SOLVED
thanks to Malnilion , Machzelet , jainanshal
my phone it's alive again
I'm very happy
Great news! Now install ClockworkMod from Rom Manager if you plan on doing any more crazy stuff to your phone lol
Hi everyone, i am unable to root my device, i have tried methods for E975 and 973.
Android 4.1.2
BB APQ8064/MDM9x15M
Kernel 3.4.0
Complation Number JZO54K
SW Version V10a_16-MAR-2013
Has anyone tried to root this model?
Any help will be really good!
YES
net0 said:
hi everyone, i am unable to root my device, i have tried methods for e975 and 973.
Android 4.1.2
bb apq8064/mdm9x15m
kernel 3.4.0
complation number jzo54k
sw version v10a_16-mar-2013
has anyone tried to root this model?
Any help will be really good!
Click to expand...
Click to collapse
yes i did it
How?
roymouse said:
yes i did it
Click to expand...
Click to collapse
Jajajaja yeah, well... how you did it man?
More details about errors you get when you try to root please?
Are you sure you tried all solutions before posting ?or,when you failed on first try you came here?
I also could't root it on first try,then i rechecked and made it work.
1.make sure you have the drivers installed.
2.use rear usb port,not frontal or usb hub.
3.make sure usb debug and allow mock locations are checked.
4.follow the steps correctly,as explained on root thread.
5.if it failed on one computer,try on another,following 1-4.i have a friend who couldn't root because of faulty windows.
6.use search button,it has been discused.
7.only after 5 and 6 failed,ask.this way we keep a clean forum,without having same questions asked over and over again.
Sent from LG E975 pwd by CM 10.1
I Brick my phone And i Need to root again. With this http://forum.xda-developers.com/showthread.php?t=2228613. Send to me pm in spanish
Saludos.
Rooted now
Ok, i tried the Motochopper and it worked fine at the first try. Used Freegee to unlock bootloader after that.
@kimitza no errors appeared, at the part thatthe program displayed "if iud=0 then root" mine was on "uid=2000 Shell" and then after i hitted continue it uploaded the apk and display on command terminal showed result as "you are now root". Wich was not true. I kept trying, activated the adb daemon manually, forced it to shutdown (kill), retried. Phone rebooted and everything was as expected but the "uid=0" Used another computer with same result. Motochopper did the Job at first try.
Here's a video showing how to root your LG G3 using PurpleDrake. Hopefully it helps.
https://www.youtube.com/watch?v=kBwKb5od88A
Hope people learn how to search for this lol.
does not work no matter what I try.
qbking77 said:
Here's a video showing how to root your LG G3 using PurpleDrake. Hopefully it helps.
https://www.youtube.com/watch?v=kBwKb5od88A
Click to expand...
Click to collapse
Tried all your suggestions and will not work on my TMO version of phone. always trys to find a file but not success, thanks anyways but to much . should work out of the box as the video description says.
vvveith said:
Tried all your suggestions and will not work on my TMO version of phone. always trys to find a file but not success, thanks anyways but to much . should work out of the box as the video description says.
Click to expand...
Click to collapse
Just did it and worked fine. You must have adb set up proper
vvveith said:
Tried all your suggestions and will not work on my TMO version of phone. always trys to find a file but not success, thanks anyways but to much . should work out of the box as the video description says.
Click to expand...
Click to collapse
Set this up on your PC first:
https://www.youtube.com/watch?v=oaNM-lt_aHw
hey guys is there a boot loader unlock for this device yet? Is it necessary or will rooting just be enough?
I currently have the M8 and i'm thinking about getting the g3
chivamex10 said:
hey guys is there a boot loader unlock for this device yet? Is it necessary or will rooting just be enough?
I currently have the M8 and i'm thinking about getting the g3
Click to expand...
Click to collapse
If you get the t mobile g3 then yes. the boot loader is unlocked.
Hello
I just got the G3 it's on 4.4.2. What's the easiest way to root this?
Sent from my SM-N910T
[Guide]LG One Click Root - root LG firmwares (KitKat / Lollipop)
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
I was on 4.4 when I rooted. I used lgg3root. com/lg-g3-root/how-to-root-lg-g3. No problems and lots of pictures.
Kingroot work for me on latest build D8510g, but it did not work in D851e. Purpledrake I never worked for me and I could not do root. so I used kingroot
EddiePR said:
Kingroot work for me on latest build D8510g, but it did not work in D851e. Purpledrake I never worked for me and I could not do root. so I used kingroot
Click to expand...
Click to collapse
Kingroot 4.1 failed for me on D85120g with the message, "Root Failed no strategy now". It looked promising at first as it had a root now buttom but root checker says no root access.
Same issue
I have the same set-up on my g3 device and have tried both one-click root methods and get no where.. I've also tried stump, kingo root, and towelroot with no results either... Any ideas??? I have all adb and android sdk setup on pc(win10) with all versions of consumer and dev drivers..
CharlieChan2010 said:
I have the same set-up on my g3 device and have tried both one-click root methods and get no where.. I've also tried stump, kingo root, and towelroot with no results either... Any ideas??? I have all adb and android sdk setup on pc(win10) with all versions of consumer and dev drivers..
Click to expand...
Click to collapse
yeah,i got rooting with this
http://sbacham.com/how-to-root-lg-g3-d851-on-lollipop-20g-firmware/
Sweet
This method worked... As i notice some of the files have been updated and auto-script worked flawless.. Thanks tons:good:
Can i root my lg g4 with this version? And how?
Sure. Perfectly. At least two different ways. If you do not need and care about device encryption just search for the low effort root in this LG G4 Forum original Android Development. Search for a flashable 10C rom.
If you need device encryption, go to LG unlock your bootloader officialy, flash TWRP and flash su.
Thread for this is right here in General G4. Called complete Guide to unlock & Flash H815 or similar.
Sent from outer space using telepathy
fpsq said:
Sure. Perfectly. At least two different ways. If you do not need and care about device encryption just search for the low effort root in this LG G4 Forum original Android Development. Search for a flashable 10C rom.
If you need device encryption, go to LG unlock your bootloader officialy, flash TWRP and flash su.
Thread for this is right here in General G4. Called complete Guide to unlock & Flash H815 or similar.
Sent from outer space using telepathy
Click to expand...
Click to collapse
If my phone stuck at lg logo what can i do then?
a bit more detail would be nice. What did you try to do?
fpsq said:
a bit more detail would be nice. What did you try to do?
Click to expand...
Click to collapse
Root
Please try KingRoot. Apk
ketan22 said:
Please try KingRoot. Apk
Click to expand...
Click to collapse
Kingroot doesn't work. Lol
Root Help
Given an Ig g4 h815 software version v10d to the system.rooted.h815v10c.img this file rooting this solution is possible http://forum.xda-developers.com/g4/...-tmo-vzw-intl-variants-soon-root-lg-t3164765?
xdaorxan said:
If my phone stuck at lg logo what can i do then?
Click to expand...
Click to collapse
Hi, unfortunately this happened to me (more than once) when I tried rooting the first time. You'll need to download the stock image files and the LG Flash Tool to start over from scratch. I'd link you but I don't have enough posts yet to be able to.
The trick is to make sure the rooted image file is over 4 gigs when extracted, I ran into issues multiple times where the download got corrupted along the way and ended up being a few hundred meg. Keep trying and once you get the right files the Low Effort Root is amazing.
Good luck and if you need any more help please let me know!
:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
Same problem here
RsGilbert said:
Same problem here
Click to expand...
Click to collapse
Hey. I got it fixed all by myself. Whatsapp me at +2348166225097 and I will help.
I own lg g3 d855
It boot until home screen but after a while black screen and it s hard to power on it again. Then need to wait a time to boot it again.
What the problem?
---------- Post added at 06:50 PM ---------- Previous post was at 06:46 PM ----------
Amlmx said:
I own lg g3 d855
It boot until home screen but after a while black screen and it s hard to power on it again. Then need to wait a time to boot it again.
What the problem?
Click to expand...
Click to collapse
Please anyone can help me?
Thanks
Thank you Litblogger
Litblogger said:
Hey. I got it fixed all by myself. Whatsapp me at +2348166225097 and I will help.
Click to expand...
Click to collapse
My thanks to Litblogger and xda. I got it fixed with your help on whatsapp, Litblogger. My phone is currently back to stock. I couldnt thank you again because the phone is now network locked. Maybe we could speak on facebook. My user name is Gilbert R Ssenyonjo.
RsGilbert said:
My thanks to Litblogger and xda. I got it fixed with your help on whatsapp, Litblogger. My phone is currently back to stock. I couldnt thank you again because the phone is now network locked. Maybe we could speak on facebook. My user name is Gilbert R Ssenyonjo.
Click to expand...
Click to collapse
Folks.
Got the same problem now (with my wife's phone). I'd appreciate it if instead of helping people privately you'd tell everyone what to do to fix the problem.
I had the same problem, downloaded .tot file via IMEI check (can't remember where from) and used that .tot file with BoardDiag, flashed everything as in tutorial (google it), it was 4.4.2 Android, couldn't update it (software is up to date) so I rooted it, flashed twrp 3.0.0 and installed Fulmics 8.0, it works now just fine