Hello, this will be my first post here at XDA, and i will be asking for your help guys...
I am experiencing bootloop on my phone.
The thing is I tried to install Xposed Installer using the Automatic method that flashes to the recovery.
It reboots them...
It passed the Galaxy Note II N7100 black screen...
It shows the TWRP logo (The blue one)
AND THEN IT JUST REPEAT AND REPEAT the TWRP logo.
I can boot to Download Mode.
Tried removing the battery and tried to enter recovery again using hardware keys, same thing happens.
What can I do now? Please Help.
Thank You!
P.S. I am running DN3 4.3 Stable using it's stock kernel.
sgtfrnz said:
Hello, this will be my first post here at XDA, and i will be asking for your help guys...
I am experiencing bootloop on my phone.
The thing is I tried to install Xposed Installer using the Automatic method that flashes to the recovery.
It reboots them...
It passed the Galaxy Note II N7100 black screen...
It shows the TWRP logo (The blue one)
AND THEN IT JUST REPEAT AND REPEAT the TWRP logo.
I can boot to Download Mode.
Tried removing the battery and tried to enter recovery again using hardware keys, same thing happens.
What can I do now? Please Help.
Thank You!
P.S. I am running DN3 4.3 Stable using it's stock kernel.
Click to expand...
Click to collapse
Well something was messed up when you flashed xposed installer( i don't know what you mean by automatic method) but do a clean install,since you can get into download mode,grab the twrp img.tar and flash it using pc odin ,then you can access recovery, do all the wipes again by going under "advanced" and reflash your rom.Now to install xposed go to xda thread for it and grab the apk from there (i think it's available on play store as well).You should have no more issues
Twrp
Like the previous post said I'm not sure what you've done. When xposed framework is installed there is usually an unistall zip created on the internal so card. If you can get recovery find it and flash it
Sent from my GT-N7105 using Tapatalk
The device is now fixed.
So okay, I followed the above instruction to flash a fresh TWRP. It does not work that way, it still has bootloop on the blue teamwin screen, what i've done is flash a .tar Philz specified for my device and then try to boot it. It boot and then it then flashes the pending Xposed script/flashable that I think TWRP can't execute that's why it bootloop. When it CWM successfully flashed it, I boot and wen't to homescreen. Then I now flashed TWRP via odin.
Thanks everyone, my Note 2 has come back to life.
sgtfrnz said:
So okay, I followed the above instruction to flash a fresh TWRP. It does not work that way, it still has bootloop on the blue teamwin screen, what i've done is flash a .tar Philz specified for my device and then try to boot it. It boot and then it then flashes the pending Xposed script/flashable that I think TWRP can't execute that's why it bootloop. When it CWM successfully flashed it, I boot and wen't to homescreen. Then I now flashed TWRP via odin.
Thanks everyone, my Note 2 has come back to life.
Click to expand...
Click to collapse
Boot into Download mode and flash philsz touch recovery 6 and reboot device .. Everything will be ok>
Old thread may be old, but it's still relevant.
I just tried to install XPosed as well on my Note II and it did the same thing (mine's AT&T)
Info
Device: Note II
XPosed Version: 2.6.1
Install Method: "Recovery (flash zip automatically)"
Recovery Image: TWRP
Mine exhibited the same behavior as OP's, however after leaving it alone for a while to bootloop recovery as much as it wanted to, I came to my laptop, found this post, grabbed as USB cable, and I was just about to start the process of reflashing recovery when all of a sudden I saw my lock screen.
It took roughly five minutes of bootloop to get it there, but it successfully installed XPosed and my device is running fine.
So, for all the other Googler's out there that landed on this post, leave it alone for a while! See what happens. If it's still bootlooping, like, 30 minutes later, then try reflashing TWRP using ODIN. If that still doesn't work, reflash a new ROM using TWRP.
Hi,
My galaxy note 2 (N7105) had a lot of crash since a couple of months so I decided to flash a custom rom.
So, first step I rooted my phone with odin & CF-Auto-Root. Then, I installed CWM & download some ROM to try.
First, with MIUI V5 : http://forum.xda-developers.com/showthread.php?t=2597096
On boot, ask me for my pin then load again & again, non stop. Can't change language & it was Japanese...
Second, CM : http://forum.xda-developers.com/galaxy-note-2/development-n7105/rom-unofficial-build-t3067695
Boot correctly but don't know why, after one or two reboot, I got a bootloop...
Third, to fix bootloop, I flashed Stock rom deodexed : http://forum.xda-developers.com/showthread.php?t=2761937
Using Odin (can't access to recovery). Boot correctly but my sim card is not recognized, so for a phone... not perfect
Finally, I tried to install again CM 12.1 but got infinity boot & then tried to flash Resurection rom : http://forum.xda-developers.com/gal...om-resurrectionremix-lp-v5-5-2-t0lte-t3170529
But got a infinity boot again so I flashed again Stock rom deodexed & my sim card is not recognized like before.
So, what's the problem ? Why can't i flash cm or other rom without infinity boot ? & Why stock rom can't recognize my SIM card ?
Please, help me cause I don't have other phone currently...
Thanks in advance !
alain21218 said:
Hi,
My galaxy note 2 (N7105) had a lot of crash since a couple of months so I decided to flash a custom rom.
So, first step I rooted my phone with odin & CF-Auto-Root. Then, I installed CWM & download some ROM to try.
First, with MIUI V5 : http://forum.xda-developers.com/showthread.php?t=2597096
On boot, ask me for my pin then load again & again, non stop. Can't change language & it was Japanese...
Second, CM : http://forum.xda-developers.com/galaxy-note-2/development-n7105/rom-unofficial-build-t3067695
Boot correctly but don't know why, after one or two reboot, I got a bootloop...
Third, to fix bootloop, I flashed Stock rom deodexed : http://forum.xda-developers.com/showthread.php?t=2761937
Using Odin (can't access to recovery). Boot correctly but my sim card is not recognized, so for a phone... not perfect
Finally, I tried to install again CM 12.1 but got infinity boot & then tried to flash Resurection rom : http://forum.xda-developers.com/gal...om-resurrectionremix-lp-v5-5-2-t0lte-t3170529
But got a infinity boot again so I flashed again Stock rom deodexed & my sim card is not recognized like before.
So, what's the problem ? Why can't i flash cm or other rom without infinity boot ? & Why stock rom can't recognize my SIM card ?
Please, help me cause I don't have other phone currently...
Thanks in advance !
Click to expand...
Click to collapse
probably old bootloader or modem
did you do a factory reset in recovery?
you can try twrp
Mmh I tried with twrp but it's the same (with factory reset)
Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.
Hey guys,
I just flashed the recovery via odin on my GT-I9195 and installed the latest release from cyanogenmod.org It worked fine, the phone started normally. But when i tried to restart the phone it was stuck on the samsung screen, saying "set warranty bit kernel". I tried to install the ROM again doing factory resets and so on but whenever I start the installation the screen goes black for a second or so and jumps back to the main menu of the recovery... I also tried the cwm-recovery which gives the same result. screen goes black and jumps back into recovery.
Anyone got a solution?
Recovery used:
openrecovery-twrp-3.0.2-1-serranoltexx-STABLE-signed.zip
CyanogenMod:
cm-13.0-20160418-SNAPSHOT-ZNH0EAO2NJ-serranoltexx.zip (snapshot)
jacob00 said:
Hey guys,
I just flashed the recovery via odin on my GT-I9195 and installed the latest release from cyanogenmod.org It worked fine, the phone started normally. But when i tried to restart the phone it was stuck on the samsung screen, saying "set warranty bit kernel". I tried to install the ROM again doing factory resets and so on but whenever I start the installation the screen goes black for a second or so and jumps back to the main menu of the recovery... I also tried the cwm-recovery which gives the same result. screen goes black and jumps back into recovery.
Anyone got a solution?
Recovery used:
openrecovery-twrp-3.0.2-1-serranoltexx-STABLE-signed.zip
CyanogenMod:
cm-13.0-20160418-SNAPSHOT-ZNH0EAO2NJ-serranoltexx.zip (snapshot)
Click to expand...
Click to collapse
Have you install "Gapps" after flashing CM13?
If you backup you custom rom than try fresh installation: copy CM13 & Gapps to Ext SD Card, Wipe everything (Dav cache, Cache, Data, Perload, Internal Storage) Dont wipe your Ext SD Card.
Than flash CM13 & Gapps after flash simply reboot. Don't wipe anything, Don't factory reset.
Hope it could be worked...
Try to go back to stock rom. Hope your phone revives.
Hi, I have a problem with the P1. I installed CM 10.1 Shev-T and TWRP 2.8.6.1 and I have never had any problems. Yesterday, after App update "Kernek auditor" the phone started to reboot continuously. I tried resetting through TWRP but it does not appear and the phone is restarted and I can not do the Nandroid restore. I can install only CWM6 and CWM stock but installing rom stok B229 and all the possible wipe the phone comes to the Android logo and then restarts itself. I think it is an internal sd card problem. Can someone help me figure out if your phone has a hardware defect and should be thrown away?
Thank you