[ROM][MTK][STOCK] fairphone FP1 kitkat 4.4.4 - 0.4 Issue - Fairphone

Hi,
first of all thank you @chrmhoffmann for your work and providing us with this. Due to the fact that the board software says I am a new member I can not reply in the correct thread or post links: [ROM][MTK][STOCK] fairphone FP1 kitkat 4.4.4 - http://forum.xda-developers.com/fairphone/orig-development/rom-fairphone-fp1-kitkat-4-4-2-t3243623
Please forgive me for that.
I think I found a serious issue with the version 0.4 (MD5: 6ffe81f45278f7c9c93a592c5622d48d), I verified the MD5 and think that no transmission errors occured. You can access apps from a pin-secured (not encrypted) FP1 (not U) without entering the pin by starting the Camera and exiting it through holding the home-button down. After that one can use the unlocked home-screens but can not open the quick-settings. This works even directly after unlocking the sim-card without an initial login.
I made a sloppy video showing the issue: http://www.youtube.com/watch?v=wevclmbicVg

Strange, I don't seem to be able to reproduce the problem. Not sure what or if it is fixed. The video is a bit too blurry to see the exact things you do. Mind doing a better one? Have you tried 0.5, too?
Chris

Still an issue with 0.7?
Chris
Sent from my ahong89_wet_jb2 using Tapatalk

No, 0.7 works perfectly. The issue has been resolved. I want to apologize for the silence from my side. Thank you again for your work!

Related

[Q] Common problems of cm9, cm10 and cm11 already known?...

Hello,
I detected the following systematic problems of cm9..11
1.) Skype cannot be started at all. It does not even react on a click of its icon. And no error message appears.
2.) the akku load status is shown incorrect during load process. E.g. after 4 hours load it shows 37% instead of true 100% (which is shown after reboot).
3.) The wonderful app 'lgCamera' runs very slow and jerky. This was fine in Android 2.x versions.
4.) the FM radio app for the WFS radio tuner (no internet radio!). How can I find it (and flash it into the system folder as a system app)?
I suppose that everybody can confirm my problems!?...
Are those already known by the development team? Cause I wonder that they are not fixed in ALL CyanogenMod versions yet!
Will there be a chance to expect their fix soon?...
5.) Furtheron I have big compatibility problems when flashing cm9..cm11 ROMs and others. Error message: "cannot load volume /misc. Can't partition non-vfat: /storage (vfat)". For nearly each ROM I have to change the recovery. Currently I change between the following recoverys (one of them allways works):
twrp-2.2.2.0, twrp-2.7.1.0, Phil-Z 6.43.7, cwm-5.0.2.8, cwm-6.0.5.3. Nobody else having that problem?...
Is there any recovery version that can read all 'formats' of zip files?...
Will there be compatibiliy at least at the backup files between all of them?...
Thank you VERY much for a quick help!
1.) not compatible anymore, say Thanks to Skype
2.) This is probably problem with battery not reading voltage correct anymore on charger (happens) for me on all roms even stock. (After 100000 of flashes and almost 3years old down sucked battery
3) ics and up isn't made for this phone, slow downs and other incompatibility can happen.
4) There is a solution called spiritfm(free) Google it, you will find the xda thread.
5) twrp 2.2.2.0 and cwm 5 is working on all ROMs beside newer kk builds (needs recovery compiled with TLS support, newest ones available)
Greetings Kevin
Hallo Kevin,
I am so glad that you answer! Thank you very much!!
to 1.) Yes, I realised meanwhile that Skype 4 ist still running fine. So the reason why the new Skype 5 version does not work on Wildfire S (or even on all CM versions of all devices??) you don't know!?...
to 2.) So this is a general Andrid 4.x problem of Wildfire S device only?... (cause e.g. on Galaxy S4 stock (of my girl-friend) it works fine!...
to 4.) Thank you. I installed this free version '0918fr.apk' but I get the error message (su rights confirmed): "Error: No FM accessible. SU: 0 Fm:BC2 SU:0 Bt:3 Ht:0 Mo:BCU". It does not seem to be compatible although I have read everywhere that it should work. Is this maybe antoo old version? Or what can be the reason?...
to 5.) So I used newer version 'cwm-6.0.5.3' and 'twrp-2.7.1.0', as I mentioned, but then these versions do not support older version than KK. E.g. 'CronMod-INT2EXT+_signed.zip'. This is the problem. Any solution?...
Is TLS ment as 'Thread-local storage'?...
Another short request:
a) Video recording with cm11 on Wildfire S works now without any patch. But if I record a video longer than about 5 seconds and I want to watch it directly after having stopped recording (timeframe about 7 seconds) then the camera app crashes. Can you confirm that on Wildfire S? What can be the reason?...
If Olivier's camera patch will help here as well I have not tested yet...
b) Management of Launcher and App screen is somehow circumstancial or not even possible. This is why the option 'Homescreen' is missing in 'Personalization' ('cm-11-20140816-Nightly') although the related screenshots of cm11 in XDA show this option!! E.g. App icons cannot be sorted alphabetically or cannot be manually moved within the screen. Or the home panel is the most left one instead of the middle one. Etc.
Any reason why the option 'Homescreen' was deleted (in XDA cm11 screenshots for Wildfire S still show it!! S. http://forum.xda-developers.com/showthread.php?t=2735775 )?...
c) CM11 OTA update suggests me 'cm-11.0.0-RC9' as the first in the list. Is this really more actual than the installed 'cm-11-20140816-Nightly' (version 11.0-20140816) ?...
d) In this version the Email system app is missing. Why?
Any zip to flash it anywhere? Or do I have to use one of the market?...
e) No warm reboot option available anymore in cm versions?...
Thanks for your help again, Kevin!
Many greetings, Falk
to 5.) I could solve that problem meanwhile by myself. I downloaded a modified version of cwm 6.0.5.3 here:
http://click.xda-developers.com/api...5.0] - Post #52 - XDA Forum&txt=the new build
But I still do not know what was modified! You?...
6.) you forgot the ever present mobile data bug at least for cm9 and cm10. Which no1 evens bothers to mention
Beeefalo said:
6.) you forgot the ever present mobile data bug at least for cm9 and cm10. Which no1 evens bothers to mention
Click to expand...
Click to collapse
Because it does not exist? I never faced any bug like that.
aWFSuser said:
Because it does not exist? I never faced any bug like that.
Click to expand...
Click to collapse
oh, its super present .
It was a "common" problem in cm9, cm10 based roms, at least judging from the various threads dating back to 2013. And as I discovered yesterday its also present in CM11 RC9 for me.
Occurence of the bug is very random and seems to be bound to certain providers which makes it hard to debug/fix i guess.
Sadly, from what I've read "deal with it and toggle airplane mode when you need mobile data" or "install cm7" are the ways to handle this bug.
cheers
Beefalo

[Q&A] [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0

Q&A for [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
question
Hi guys, i have a bug: calling history not show
Problem
It repeatedly giving error com.android.phone has unfortunately stopped . And the ROM is able to search the mobile networks but there is bar in signal strength . Means it not getting the signal .
Rest everything is ok .
PLease help me ASAP .
Does video recording work on your phone? Because I have camera app crashing all the time after switching to video.
Some Question about this ROM
Hi,
my Ace2 is still running under Stock Android 2.3.6. and I would like to Upgrade to CM.
For me stability and a working phone are more important than having the latest android Version, so my question is - which CM Version would you recommend? CM11 or is CM10.2 more stable? And is the latest version also the most stable one?
Is it correct that the only issue with CM11 is the Live streaming problem and with CM10.2 the memory leaks reported by some users- or are there more problems with these ROMS? A well working GPS is also important for me - is this the case?
And how difficult would it be to go back to stock 2.3.6. if CM is not working well for me?
Sorry for all the question and thanks in advance!
bootloop on the latest build from Rox
stuck on boot loop as is:
http://forum.xda-developers.com/showpost.php?p=56027724&postcount=5377
cm-11-20140807-UNOFFICIAL-codinap from @ace2nutzer
Install the firmware, reset the smartphone, then GAPS. If all at once, when you start on selecting the language setting is not. This, in my case, I tried several times. @ace2nutzer when to expect an update of your firmware
Hello
i have the i8160L,are the links you gave working on that version?
also if its working and i root that cm11,can i get back to my original firm later?
thanks
Bootloop
Rox, are you going to be fixing teh bootloop in the last build?
Also: the call log is empty, is there any fix for that?
Blackscreen
I want to record a logcat showing a black screen ocurring on wake up, with the s6d driver, in order to help in the resolution of the bug...
What's the priority level I should set for the catlog? Verbose, Debug, Info, Warnings, Errors, or Fatals?
Reboot loop with 1014 update
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Grmblprmf said:
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Click to expand...
Click to collapse
Flash chrono kernel..1014 build got a kernel broken...
@hackstorm1989
I have the GT-I8160L too.
This ROM specifically i haven't tried yet, but I've installed 2 different builds of NovaFusion CM11 (http://forum.xda-developers.com/showthread.php?t=2568105) and now I'm running J-TEAM AOSP (http://forum.xda-developers.com/showthread.php?t=2588054).
As TeamCanjica, both these ROMs are for the GT-I8160, but can be installed on GT-I8160L by changing the lines in the updater-script of the ROM (META-INF/GOOGLE/ANDROID/) where it checks the model of the device. I also read that the tee folder (system/lib/) of the ROM must be replaced by a copy of a tee folder from a running GT-I8160L firmware with SIM and carrier services properly working.
I've followed this guide:
http://brasildroid.com.br/showthread.php?t=23729
So, just by checking the updater-script of teamcanjica CM11, i GUESS it could be installed on GT-I8160L through the same 2 steps that i did with the other cited ROMs.
Also, I remember seeing other members running these ROMs on the L version while reading these 3 threads. I really wanna know what exactly differences are between these 2 device versions.
Please anyone let me know and correct me if I've posted any wrong information.
@soraxx
I can´t post in the main thread yet (10 post treshold), but maybe you read this or someone can copy this into the main thread.
I had exactly the same problem (audio but no video picture) and a simple change from stock browser to firefox solved it - Maybe it works for you too.
This should be main thread from now on
Same problem
Bootloop
14.10 bootloop
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Elder666 said:
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Click to expand...
Click to collapse
read this carefully:
http://forum.xda-developers.com/showpost.php?p=56171431&postcount=5436
Hi guys,
In stripped versions I notice camera quality and time of battery are worse... I'm going to try the build made for ace2nutzer 07-aug-2014 and stay on it by now.

[Q&A] [ROM][4.4.4][KTU84Q][SlimKat - Hercules][OFFICIAL+Weeklies]

Q&A for [ROM][4.4.4][KTU84Q][SlimKat - Hercules][OFFICIAL+Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][KTU84Q][SlimKat - Hercules][OFFICIAL+Weeklies]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BEEN LOOKING For SO LONG!!
NoSpamDan said:
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you will find everything you need to know about SlimRoms.
Slim Downloads - Download the ROM, GApps and other Addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequently asked questions with answers.
Kernel Source - The source of your device's kernel.
See Post #2 for Known Issues and Installation Notes.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Special thanks to (in no particular order):
The Slim Team
CyanogenMod
prbassplayer
wantowan2
kintwofan
Disclaimer: SlimRoms are not responsible for any damages to your device.
Click to expand...
Click to collapse
helllo,
will this work for mine??
Heres is my Phones info.
SGH-T989
Android Version
2.3.6
Baseband Version
T989UVLDH
Kernel version
2.6.35.11-1209942
Build Number
GINGERBREAD.UVLDH
mono956 said:
helllo,
will this work for mine??
Heres is my Phones info.
SGH-T989
Android Version
2.3.6
Baseband Version
T989UVLDH
Kernel version
2.6.35.11-1209942
Build Number
GINGERBREAD.UVLDH
Click to expand...
Click to collapse
Absolutely should work, however, you have some homework to do in order to ensure success. You will need a new recovery, new radio and might need to jump to ICS first, not sure. One other thing I would recommend is turning on your GPS and getting a GPS lock before rebooting to flash a new radio, recovery and ROM if coming from GingerBread as you are...
Head on over to Vincom's 1-Stop Sticky Thread, which contains information all about the SGH-i727 Skyrocket, and the T-Mobile Dev Thread. The Hercules is almost identical and hardware, and most Skyrocket ROMs should work on both, with maybe one issue of screen orientation (turned 90 degrees).
There are radio links in the OP of my SlimKat Hercules thread.
Read up in those threads, and then find a newer recovery and radio that you need need to proceed.
Thank to Slimrom
I'm very happy to keep my old pal (T989) on working everyday with Slimrom.
I change from CM11 to Slimkat build 7 serveral months agos.
I flashed by zip with CWM, it was working but couldn't reboot by default, dark screen and no response anything. I think it was my fault.
Then I restored and flashed it again with Rom Manager, it's successful.
With mini gapps pack, Rom (build 7) works like a charm. Then I disabled some google services for better RAM and speed (for example Hangout is kinda heavy)
Herein is some point that I think could make it better:
There is no option to change launcher ( Nova launcher by default)
There is no option to change/customize clock widget on LockScreen (DashClock Widget by default)
Recent Apps function: didn't show the latest using app on the list (when my current screen is homescreen).
Recent Apps function: Couldn't access to previous app (Close App error)
Step to reproduce: If you're using App A, then App B, you try to access App A via Recent Apps function. Then error message "Close App" will be display. But luckily I've found my own way to resolve, just change to random App C, then back to App A as usual (a little bit unconvenience but it was not a problem)
Notification couldn't updated by user behavior. For example, I have notification for new message on Viber, then i access Viber to check a new message ( do not touch on Notification ), so this notification will be remained for a long time ( until I touch on it for re-read)
I couln't tested with build 8 due to camera error ( couldn't handle camcorder function, couldn't focus) but I'm really happy with the build 7.
Thank you.
Can't hear or make calls after flashing
Installed the stable Slimkat for t989 I can't hear any dialing sound or anything when somebody calls me :/ back to stock
4xxxxL said:
Installed the stable Slimkat for t989 I can't hear any dialing sound or anything when somebody calls me :/ back to stock
Click to expand...
Click to collapse
Stable version 8? No such issues have been reported. Bugreport?
One Skyrocket user has reported the inability to receive casks in WEEKLY version 8.12.1. He went back to weekly version 8.10 and incoming calls are working. These phones share a lot of source code.
It must be caused by something merged since the 8.12.1 WEEKLY.
Read post 2 in the main thread for how to submit a Slim bugreport to help fix this.
Sent from my OnePlus One BACON using Tapatalk
yep
NoSpamDan said:
Stable version 8? No such issues have been reported. Bugreport?
One Skyrocket user has reported the inability to receive casks in WEEKLY version 8.12.1. He went back to weekly version 8.10 and incoming calls are working. These phones share a lot of source code.
It must be caused by something merged since the 8.12.1 WEEKLY.
Read post 2 for how to submit a Slim bugreport to help fix this.
Sent from my OnePlus One BACON using Tapatalk
Click to expand...
Click to collapse
Yes. 8.0 stable release from the site slim-hercules-4-4-4-build-8-0-official-6919
as for the bug report I panicked since I needed the phone in working state withing an hour so I flashed the stock firmware back so not much help from me now . But yeah I called a phone in the household and phone was making a call its just I couldn't hear the dialing tone and when the second person picked up it was dead silence on my side.
This is not he first time I had this issue previously I tried cyanogenmod 10.2.0 stable and had the same issue out of nowhere after month of working just fine
Thanks for the feedback. Full wipe, including /data wipe or factory reset?
bacsidien94 said:
Herein is some point that I think could make it better:
There is no option to change launcher ( Nova launcher by default)
Click to expand...
Click to collapse
All you have to do is install another launcher, then press the home key and select your preferred one and select "Always"...
There is no option to change/customize clock widget on LockScreen (DashClock Widget by default)
Click to expand...
Click to collapse
You have to allow lock screen widgets, then drag it off the screen and add what you want.
Recent Apps function: didn't show the latest using app on the list (when my current screen is homescreen).
Recent Apps function: Couldn't access to previous app (Close App error)
Step to reproduce: If you're using App A, then App B, you try to access App A via Recent Apps function. Then error message "Close App" will be display. But luckily I've found my own way to resolve, just change to random App C, then back to App A as usual (a little bit unconvenience but it was not a problem)
Click to expand...
Click to collapse
To many possibilities without a bugreport...
Notification couldn't updated by user behavior. For example, I have notification for new message on Viber, then i access Viber to check a new message ( do not touch on Notification ), so this notification will be remained for a long time ( until I touch on it for re-read)
Click to expand...
Click to collapse
What other apps do this? Tapatalk does this for me on CM11S with my OnePlus One even. Probably an app issue.
I couln't tested with build 8 due to camera error ( couldn't handle camcorder function, couldn't focus) but I'm really happy with the build 7.
Click to expand...
Click to collapse
Full wipe. Camera is fine on Build 8.
Everyone, PLEASE, if you have issues, refer to post 2 IN THE MAIN TOPIC for instructions on submitting a Slim bugreport in a new thread on the SlimROMs support forum!
Sent from my OnePlus One BACON using Tapatalk
---------- Post added at 10:15 PM ---------- Previous post was at 10:10 PM ----------
4xxxxL said:
Yes. 8.0 stable release from the site slim-hercules-4-4-4-build-8-0-official-6919
as for the bug report I panicked since I needed the phone in working state withing an hour so I flashed the stock firmware back so not much help from me now . But yeah I called a phone in the household and phone was making a call its just I couldn't hear the dialing tone and when the second person picked up it was dead silence on my side.
This is not he first time I had this issue previously I tried cyanogenmod 10.2.0 stable and had the same issue out of nowhere after month of working just fine
Click to expand...
Click to collapse
No problem. Sounds like a radio issue though or dirty flash.
Sent from my OnePlus One BACON using Tapatalk
I'm using the build by Dan that fixed calling, and I'm getting a huge memory leak problem. The Base System process would start using 100 MB to 200 MB of my RAM, while hogging a part of my CPU at all times. I was watching a video earlier and noticed my CPU usage jumped to 100% and the available RAM started going around 200 MB before the system killed my on-screen system stats display (Cool Tool). I didn't have any other apps running and nothing was being updated at that moment. The video started getting choppy and my phone froze soon after. If you need a log from me, I'll be happy to provide one.
dennis96411 said:
I'm using the build by Dan that fixed calling, and I'm getting a huge memory leak problem. The Base System process would start using 100 MB to 200 MB of my RAM, while hogging a part of my CPU at all times. I was watching a video earlier and noticed my CPU usage jumped to 100% and the available RAM started going around 200 MB before the system killed my on-screen system stats display (Cool Tool). I didn't have any other apps running and nothing was being updated at that moment. The video started getting choppy and my phone froze soon after. If you need a log from me, I'll be happy to provide one.
Click to expand...
Click to collapse
Have you tried the 8.16 weekly from the Slim site, or the test build I posted? Either way, there shouldn't have been any changes (that I made, at least) which would cause such a memory leak...
Clean flash? What GApps version? What app were you using to watch video? YouTube has had some intermittent issues, and I have also heard of recent Google Play Services issues...
If you can start a new thread in the Slim Hercules forum and post a good description with a Slim bugreport, it may be helpful. See Post 2 of the main thread for more details on helping to squash any bugs.
After I installed the rom, the slim gapps, and supersu, my phone did not boot up and did not even show a bootanimation. I tried going into recovery to restore a backup but it would not enter recovery mode. There would just be gentle vibrations and then a black screen. I was using TWRP v2.8.4.0. I would prefer to avoid the hassle of flashing through odin. Please help, thank you.
berZerk7 said:
After I installed the rom, the slim gapps, and supersu, my phone did not boot up and did not even show a bootanimation. I tried going into recovery to restore a backup but it would not enter recovery mode. There would just be gentle vibrations and then a black screen. I was using TWRP v2.8.4.0. I would prefer to avoid the hassle of flashing through odin. Please help, thank you.
Click to expand...
Click to collapse
Can you get to download mode? With phone off, hold both Vol Up & Vol Dn while plugging a computer USB cable in.
Sounds like a bad flash, bad download, recovery issue, or possible h/w problem. The fact that you can't get to recovery suggests a recovery or h/w issue to me.
Does the below work for Recovery mode?
Press and hold Vol Up, Vol Dn and Power for 2 seconds, then release Power but continue holding Vol Up & Vol Dn until recovery loads.
Sent from my OnePlus One BACON using Tapatalk

[Q&A] [ROM][RRO-Layers][New Layout] XenonHD-5.0.2 Stable 1.0 (22.02.15)

Q&A for [ROM][RRO-Layers][New Layout] XenonHD-5.0.2 Stable 1.0 (22.02.15)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][RRO-Layers][New Layout] XenonHD-5.0.2 Stable 1.0 (22.02.15). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ran into a roadblock..
Hi there, could someone tell me why TWRP seems to be telling me "unable to mount system/dev/block/sdhci-tegra-3 by name etc.. device or resource is busy when i try to flash the rom? :silly: I have no clue what to do now.
Here is what i have done till now:
-Switched to the new layout (had the drives pop up, copied the rom)
amdpcman said:
Hi there, could someone tell me why TWRP seems to be telling me "unable to mount system/dev/block/sdhci-tegra-3 by name etc.. device or resource is busy when i try to flash the rom? :silly: I have no clue what to do now.
Here is what i have done till now:
-Switched to the new layout (had the drives pop up, copied the rom)
Click to expand...
Click to collapse
Please be more specific, since I don't know if you setup new layout TWRP properly or not.
Bug
proximity sensor problem,it switch off screen during incoming outgoing calls. I had the same problem with Viperx rom, but i've used this fix http://forum.xda-developers.com/showthread.php?t=1882725 in the init.d to solve it, but this fix isn't working with this rom. Plz help.
Otherwise real great rom, so smooth.
ahmedoxda said:
proximity sensor problem,it switch off screen during incoming outgoing calls. I had the same problem with Viperx rom, but i've used this fix http://forum.xda-developers.com/showthread.php?t=1882725 in the init.d to solve it, but this fix isn't working with this rom. Plz help.
Otherwise real great rom, so smooth.
Click to expand...
Click to collapse
Switch off screen during calls? Its supposed to turn off screen when you are calling and phone is at your ear, but wake up when you pull away from ear. This to keep your ear from pressing buttons
Solved proximity sensor
ljjehl said:
Switch off screen during calls? Its supposed to turn off screen when you are calling and phone is at your ear, but wake up when you pull away from ear. This to keep your ear from pressing buttons
Click to expand...
Click to collapse
It's ok now i used that same fix
HTML:
http://forum.xda-developers.com/showthread.php?t=1882725
and enabled init.d so it's working fine. the problem was that even though i keep the phone clear at a distance the screen would stay off during calls, i tried a lot of proximity sensor apps but no chance. That fix did the trick though, i hope that this would help anybody else who' having the same problem.
P.S. Thanks for the great work, I really hoped this would do it, so i can keep using your rom. :highfive:
Hi,
I'm stuck at boot --> To start Android, enter your password
Wat's that ? Pin code ? Password Gmail ?
My phone reboot in recovery (twrp 2851 BIG), work, and reboot at password ?...
Help please ! Thanks.
Not sure what you have here. I'm thinking you have your sim card password protected. Did you install gapps? If so, then its probably prompting for email and password
ljjehl said:
Not sure what you have here. I'm thinking you have your sim card password protected. Did you install gapps? If so, then its probably prompting for email and password
Click to expand...
Click to collapse
i dont know, it's weird, never meet this problem.
Yes, i install gapps, i tried several manners, but no, always this password problem ! even after a full format.
thank you for your help. (not top my English, sorry)
ScredDEEP said:
i dont know, it's weird, never meet this problem.
Yes, i install gapps, i tried several manners, but no, always this password problem ! even after a full format.
thank you for your help. (not top my English, sorry)
Click to expand...
Click to collapse
Have you installed lollipop before? Well, the pa gapps for lollipop has a different format in how it sets up. It requires you to setup a user id and password. You can skip all that and move straight to the rom, or just install only the ROM without gapps for now
ljjehl said:
Have you installed lollipop before? Well, the pa gapps for lollipop has a different format in how it sets up. It requires you to setup a user id and password. You can skip all that and move straight to the rom, or just install only the ROM without gapps for now
Click to expand...
Click to collapse
Yes, already installed Lollipop several times without any problems. I'm currently running on AICP - 8.0 - LP. I install tried many Roms.
This password history this is the first time I see it.
Oh well, with my bad English, it's not easy for me to make me understand
thank you for wanting to help me.
ScredDEEP said:
Yes, already installed Lollipop several times without any problems. I'm currently running on AICP - 8.0 - LP. I install tried many Roms.
This password history this is the first time I see it.
Oh well, with my bad English, it's not easy for me to make me understand
thank you for wanting to help me.
Click to expand...
Click to collapse
Try posting a picture of it, maybe its pretty simple.
Many thanks for this ROM. Is very smooth.
I have a two problems:
1. MMS is not working - no send and no download the massage. I was try the google massenger app but it is the same. Looks like the device does not change connection from internet to mms ( APN ). The mobile data setting for mms are ok.
2. I tried to setup email app. After setup the app show the massege about close the app. After tap OK its blink again and again. After reboot massage does not disappear .
There is a solution for that?
Regards
przyczyn
ljjehl said:
Try posting a picture of it, maybe its pretty simple.
Click to expand...
Click to collapse
No worries, i wait a little. I take the opportunity to install new layout.
I had the same problem with crDroid ?...
Thanks
Installation successfully completed.
Thanks for that rom.
ps : I also problems with mms.
I'm working on having an update uploaded later today. This is probably be the last one before 5.1
ljjehl said:
I'm working on having an update uploaded later today. This is probably be the last one before 5.1
Click to expand...
Click to collapse
So you support Lollipop on our old One X
It's really nice of you.
I will follow your progress ...
Please, good battery and impeccable Gps. And, https://play.google.com/store/apps/details?id=com.littlecakemedia.lwp.materialabstract not working for me.
I beg you, GPS AND BATTERY first !
ps : Mms work for me, hangs Gps sucks...sorry
Bugs: After reboot sometimes touch not working. Must enter recovery that touch can work.
Test
just installed the 2a, real nice btw .
I'm officially a supporter, too bad i'm broke
But is it possible to have the fm radio working.
HTML:
http://i.imgur.com/pTCiU1Q.png
Its possible, need a reminder if I slack, lol

[Q&A] [ROM][UNOFFICIAL][5/7] CyanogenMod 12.1 | Beta 1

Q&A for [ROM][UNOFFICIAL][5/7] CyanogenMod 12.1 | Beta 1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][5/7] CyanogenMod 12.1 | Beta 1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Great job guys. Going to wait till a more stable build but you guys should be very proud of yourselfs. None the less this is great work. Made my day knowing there are people like you guys.
Build you just posted
Just downloaded it and tested, the issues with the navbar/status bar etc. are still there.
Can' t wait for this to be finished, thanks for the hard work.
I just got to flashing this
I don't get navbars, status bar, or notifications shade either.
Volume buttons do nothing, trying to change brightness crashes Settings, there is no power menu.
The default CM12.1 wallpaper is also missing (black screen) and there is an icon missing from the dock.
Strange.
I couldn't test the camera (because I can't navigate anything without back or home buttons), so I can't say much about that.
Keep up the good work though, I'm more than willing to test any new builds!
Keep us posted!
Camera m9 sense port
Has anyone tried using the sense port for all aosp roms from
http://forum.xda-developers.com/lg-g3/themes-apps/mod-htc-one-m9-camera-port-t3056305
To see if that makes the camera work?
After flashing the 2 June build and then the current build, all seems to be working.
Interested....however need 2.8 firmware as base and everything working good battery life before I make the transition which I'm guessing could be awhile. Dolby audio also very important.. will keep checking thread for updates thanks for your efforts
Sent from my HTC One M9 using XDA Free mobile app
In safe mode :/
I installed it and everything but it boots into safe mode, problem is when i try to turn it off using power button it just restarts phone into safe mode without asking to power off or anything! Anyone got anything?
Not sure if OP or any of the devs are reading the Q&A section,
but I've been using the latest build (with the 2 June flash before, of course) on 1.32.* as my daily ROM since the statusbar/softkeys fix was posted.
Some interesting negatives/bugs I've noticed:
No double tap to wake
Battery usage data never shows up
Cannot search for service providers (Get an error, but selecting auto works and finds the correct carrier)
Possibly unrelated but the quick settings tiles for the notifications shade are extremely limited (No volume or independent brightness tiles, et cetera. I think these need to be implemented by the rom developer, as they exist for other CM12.1 devices on official roms)
Otherwise, I think all is working fine. (Well, minus what was marked "broken" (camera, USB OTG, ...) but it looks like there were recent commits on github for the SoC, so maybe this or a fix for newer frameworks is coming!)
Battery life is better than sense, and everything is much snappier. Xposed works (using v65 for now), as do most lollipop modules. (Except Amplify which blocks no wakelocks, but I think this is an arm64 issue because many M9 users are reporting this in the Amplify thread, even on Sense/"stock" roms.)
If anyone sees this (with more than 10 posts lol) please direct OP to the Q&A section so he can see these issues.
I'll continue to use this for now, I haven't had the reboot problem other people are experiencing.
If there's anything someone would like me to test, I'm more than willing, just let me know.
ptv9 said:
Has anyone tried using the sense port for all aosp roms from
http://forum.xda-developers.com/lg-g3/themes-apps/mod-htc-one-m9-camera-port-t3056305
To see if that makes the camera work?
Click to expand...
Click to collapse
I think the actual rom implementation (drivers/firmware) is the problem with the camera.|
It turns out that mods removed the download link in that thread anyway.
Sorry!
Unofficial cm 12.1 hima
I have flashed the ROM as instructed ... And all works well until the phone goes to "sleep". I an unable to wake the device. I have to power off and reboot phone. Is there a fix for this?
Downgrading Firmware
I've frankly had quite enough of the Sense UI, however, after flashing this ROM, I experienced the sporadic reboots and navbar issues which many other users have posted about. Some say that flashing back to the 1.32 firmware (in my case from 2.7) will fix the issue, but won't this bring back overheating issues and terrible performance?
@BananaMasamune and @rickymartel01,
Did you both flash the 2 June build before the 5 July build? That seems to have fixed navbar issues for most people.
Downgrading firmware fixed sleep and reboot problems for most of us as well.
I was never on 2.x so I'm not sure about performance problems, but it definitely feels faster and more fluid than Sense on 1.32.x
European
Is it working for European device?
---------- Post added at 08:58 AM ---------- Previous post was at 08:43 AM ----------
Is it working for Eruropean devices?
@dreznik82,
My device isn't from the United States, and it works for me.
Check to see if your phone is GSM or CDMA.
There is a list on HTC's website somewhere that lists carriers, and tells what version of the phone they have. Many of the GSM phones are WWE (world-wide edition, international) and can be used with this.
Nice work
Good work guys. How long you reckon it would take to get this as a stable nightly build once broken items have been resolved?
Also no status bar and navigation bar on mine as well
Does anyone know if xposed works ?
fix for downgrade
could you try to fix the ''downgrade'' problem in the next update?
because I am not able to downgrade (don't know why)
thanks
@Galaxysm , Xposed works.
@Rogi1997 , Are you S-Off?

Categories

Resources