Related
This CyanogenMod Rom is made by Thomas231 all credits should go to him.
I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
Your Bootloader must be unlocked and TWRP recovery installed.
Installation:
-Place rom.zip and GApps on your internal SDcard
-Reboot into TWRP and make a Backup of your System (boot,system,data)
-In TWRP delete your data and cache/dalvik
-Flash rom.zip and GApps
-restart your device (first start take a few minutes)
-done
Bugs:
The Sony AOSP Camera Driver Bug for all kitakami Devices.
Downloads: cm-13.0-20160710-UNOFFICIAL-ivy.zip
TWRP
reserved
good job， nice ,nice work hahahaha lol
Anyone running this right now? I'm wondering if we can use Android Pay if not rooted on CM13
I will try it today and post some screenshots
Will try it right now and will provide screens
Sent from my E6553 using XDA-Developers mobile app
lukeaddison said:
Anyone running this right now? I'm wondering if we can use Android Pay if not rooted on CM13
Click to expand...
Click to collapse
I'm running it right now, but unfortunately can neither confirm nor deny if Android Pay is working since I live in a country where Android Pay is not (yet?) available.
So im running the rom right now and its all fine except that the battery seems to drain faster than its charging with a 1.5 amp charger.
Misanful said:
So im running the rom right now and its all fine except that the battery seems to drain faster than its charging with a 1.5 amp charger.
Click to expand...
Click to collapse
That's weird indeed, I'm running mine on a 2A charger right now and everything is like with the stock Sony ROM. I had a few apps on my phone which drained the battery pretty heavily before I used Greenify in BOOST mode (btw, systemless Xposed works so far with this ROM).
is it work with dual sim? or just only for single sim?
feizhel_vandrago said:
is it work with dual sim? or just only for single sim?
Click to expand...
Click to collapse
It definitely works with the Single SIM version, I can neither confirm nor deny if the ROM works with the dual SIM version since I don't have the dual SIM version. From what I can tell the drivers I used don't seem to be compatible with the dual SIM version. If you want to give it a shot, though, feel free to do so and I would kindly ask you to report back with your results.
Waiting for the version for E6533(Dual Sim)
Thx
So i've been testing the rom (rooted) now for 3 days on my E6553 (single sim) and i would say that it's a good rom but right now i wouldnt use it as a daily driver, i (at least) get random freezes and generally a realy slow and jaggy experience when compared to Sony stock firmware .224/.253. And the fact that the Back camera doesnt work in this rom makes it impossible for me to use since i take a lot of pictures and use snapchat. I experienced many problems with charging like the device draining faster than its charging and at sometimes just would not charge at all, tested with 4 different chargers and with another rom. There is also a problem with i think the kernel because when i was watching netflix or youtube after 3-5 minutes the video would start lagging really bad because the cpu was basically sleeping with only one core at about 400 mhz until i tapped the screen so input boost was activated and the device could render the video properly. (the device was not in any kind of power saving mode) If someone continue to develop this rom ide be glad to test the builds for bugs and etc! :cyclops: i would give the rom 6/10 doughnuts, For now im switching back to Stock .253
Misanful said:
So i've been testing the rom (rooted) now for 3 days on my E6553 (single sim) and i would say that it's a good rom but right now i wouldnt use it as a daily driver, i (at least) get random freezes and generally a realy slow and jaggy experience when compared to Sony stock firmware .224/.253. And the fact that the Back camera doesnt work in this rom makes it impossible for me to use since i take a lot of pictures and use snapchat. I experienced many problems with charging like the device draining faster than its charging and at sometimes just would not charge at all, tested with 4 different chargers and with another rom. There is also a problem with i think the kernel because when i was watching netflix or youtube after 3-5 minutes the video would start lagging really bad because the cpu was basically sleeping with only one core at about 400 mhz until i tapped the screen so input boost was activated and the device could render the video properly. (the device was not in any kind of power saving mode) If someone continue to develop this rom ide be glad to test the builds for bugs and etc! :cyclops: i would give the rom 6/10 doughnuts, For now im switching back to Stock .253
Click to expand...
Click to collapse
I also noticed the rather slow experience, especially when installing apps and using the device (especially while switching apps). As for YouTube, I just tried to replicate your issue with the slowdown, but was unable to do so. The back camera not working is afaik an issue all custom ROMs built with the Sony drivers suffer right now (which I also used when compiling this ROM).
Speaking of compiling the ROM, I tried for the last like 4 or 5 days to get another compilation run. I don't know if I will be able to get it to working again (and I did it exactly the same way as I did on my two successful builds). It doesn't seem to matter if I do it on a fresh install of Ubuntu 15.10 or on one I already used for a build, but if I'm lucky enough to be able to select cm_ivy as the device to build for, mka clobber and mka bacon both fail after like a second with the error message that the mk file for the sepolicy cannot be found (which is true, the file is not present, but the same was the case with the other two successful builds).
So all in all, I know the camera isn't working properly (which was an issue I also had with the 32.2.A.0.224 stock ROM), but (at least for me) the audio is working without any problems with this ROM (which was an issue I had with the 32.2.A.0.224 stock ROM, where I was unable to listen to music via the 3.5mm jack), and I cannot seem to get the building process to run for whatever reason.
I think this rom, should be better taken into account ...
The Cyan and 'has always been one of permanti rom.
If there was a way to install it without problems on my E6533 dual sim, I would install immediately ...
i use dual sim(E6533)and i need this rom i read this has less heating.i installed a cm rom from this site for dsds but it was weird that wifi did not work and for that i am begging you to make this rom for dual sim plllllllllllllllllllllllllllllllllllllllllllllllllllllz
pou_gh2 said:
i use dual sim(E6533)and i need this rom i read this has less heating.i installed a cm rom from this site for dsds but it was weird that wifi did not work and for that i am begging you to make this rom for dual sim plllllllllllllllllllllllllllllllllllllllllllllllllllllz
Click to expand...
Click to collapse
This already exist... http://forum.xda-developers.com/xperia-z4/orig-development/rom-cyanogenmod-13-e6533-t3451524
saturday_night said:
This already exist... https://www.androidfilehost.com/?fid=385035244224382359
Click to expand...
Click to collapse
this is aosp not cm!
plz plz plz plz plz tell me why for me d..... wifi does not work in this plz plz plz i need it nobody knows,in every cm all says rom is good all things work good but for me wifi is not working
What is ivy ??? In my E6553 When i try to install i see ( error 7 this package is for ivy device...)
I bought zuk z2 4 days back and I installed latest official Indian nougat ROM on it then I unlocked the bootloader and installed few custom ROMs like jaguar nougat , jaguar Oreo , aosp extended , pixel experience etc on each and very rom I face a problem that is after installing any custom ROM the phone was neither charging nor discharging and sign of charging was flashing it was not constant so I tried many things like
1- changing back to stock marshmallow then charging started working again so I unlocked bootloader on marshmallow version and installed custom ROM it doesn't worked again so installed stock nougat qpst through qfil
2 again installed fee custom roms and deleted battterystats.bin it wasn't working again on different ROMs .
3. Tried different charger and wires again it wasn't charging and discharging
4 charging seems to not working even when I switch off it just stuck at that percentage
It seems to working only when you boot into recovery mode
Help me what should I do to solve this problem
Try flashing stock ROM by using qfil tool
dknsb said:
Try flashing stock ROM by using qfil tool
Click to expand...
Click to collapse
I already tried that not working ??
rk2shashank said:
I already tried that not working ??
Click to expand...
Click to collapse
Did you delete battery stats.bin
GopalKaul said:
Did you delete battery stats.bin
Click to expand...
Click to collapse
Yeah I already tried that deleting batteystats.bin
rk2shashank said:
Yeah I already tried that deleting batteystats.bin
Click to expand...
Click to collapse
Did you try nougat custom roms? And Jaguar?
GopalKaul said:
Did you try nougat custom roms? And Jaguar?
Click to expand...
Click to collapse
i have tried all the roms all the versions i can find on internet i was just flashing roms for 2-3 days nothing worked its (charging and discharging) just worked till jaguar nougat version 16 plus after that it wasnt working on jaguar too that is from r 17 . and all oreo roms has battery stuck on 65%
same problem
rk2shashank said:
i have tried all the roms all the versions i can find on internet i was just flashing roms for 2-3 days nothing worked its (charging and discharging) just worked till jaguar nougat version 16 plus after that it wasnt working on jaguar too that is from r 17 . and all oreo roms has battery stuck on 65%
Click to expand...
Click to collapse
same problem bro. only viper 3.1 version is showing correct battery percentage. all other roms shows me 65% even if it is at 0%.
i contacted aex developers . they suggested battery caliberation app. even that sucks. aex 5.2 rom is awesome . but it has battery problem and few features like pip mode, camera protrait etc are not working at all. if you get the solution. please share it me.
until then, use viper 3.1, no matter how many i got stuck at other roms. viper 3.1 saved me all the time. but i want oreo so waiting for the solution from someone
jayanth619 said:
same problem bro. only viper 3.1 version is showing correct battery percentage. all other roms shows me 65% even if it is at 0%.
i contacted aex developers . they suggested battery caliberation app. even that sucks. aex 5.2 rom is awesome . but it has battery problem and few features like pip mode, camera protrait etc are not working at all. if you get the solution. please share it me.
until then, use viper 3.1, no matter how many i got stuck at other roms. viper 3.1 saved me all the time. but i want oreo so waiting for the solution from someone
Click to expand...
Click to collapse
Yesterday I flashed f1xy kernal charging and discharging seems to be working on every Oreo ROM on f1xy kernal it's not the problem of battery caliberation it's something else it's in kernal maybe someone can find out
Thanks a lot. but pip is still not working.
rk2shashank said:
Yesterday I flashed f1xy kernal charging and discharging seems to be working on every Oreo ROM on f1xy kernal it's not the problem of battery caliberation it's something else it's in kernal maybe someone can find out
Click to expand...
Click to collapse
thank you very much bro. battery is working now. but pip (picture in picture) mode is not working. if you have a solution , please send it
jayanth619 said:
thank you very much bro. battery is working now. but pip (picture in picture) mode is not working. if you have a solution , please send it
Click to expand...
Click to collapse
i havn't use pip yet but i think its for youtube red subscribers or if you watching youtube on chrome then only it works its rom problem nothing related to kernal
you are right
rk2shashank said:
i havn't use pip yet but i think its for youtube red subscribers or if you watching youtube on chrome then only it works its rom problem nothing related to kernal
Click to expand...
Click to collapse
pip is working in whatsapp and chrome.. thanks for the help..
Bro try latest TWRP or install battery driver's
need small help
rk2shashank said:
i havn't use pip yet but i think its for youtube red subscribers or if you watching youtube on chrome then only it works its rom problem nothing related to kernal
Click to expand...
Click to collapse
everything is working awesome with no bugs but only problem is BATTERY is DRAINING at light speed
i am not getting even 4 hrs of screen in time. previously i used to get 8-9 hrs. any suggestions? i didnt install any supersu. but i am using greenify
jayanth619 said:
everything is working awesome with no bugs but only problem is BATTERY is DRAINING at light speed
i am not getting even 4 hrs of screen in time. previously i used to get 8-9 hrs. any suggestions? i didnt install any supersu. but i am using greenify
Click to expand...
Click to collapse
That's the same with me but not as bad as you are getting I am getting 5 hours of sot I am using aosip with the kernal
I had the same issue when i moved from Viper 3.1 to Oreo 8.1 custom roms (AEX, Pixel Experience and RR 6.0). After flashing the F1xy kernel , on each of them i am getting a SOT of barely 2-3 hours, as compated to 5-6 hours i was getting on Viper 3.1. Also, the battery drains pretty quick.
Like other, i too posted this query on AEX's Google+ page, and was suggested to use Batter Calibration app or resetting the batter stat file. None of them have worked.
Kernel has helped to resolve the charging and calibration issue, but batter backup has worsen.
Let us know if anyone is able to identify the problem and have a solution for it. This doesn't seem to be problem with all devices, just a few. I wonder what it might be.
Color reproduction issue
rk2shashank said:
That's the same with me but not as bad as you are getting I am getting 5 hours of sot I am using aosip with the kernal
Click to expand...
Click to collapse
I have colour reproduction issue in screen.. colors are too warm. Even the videos I play have some sort of red color addition .. do have same issue?
amargowda3250 said:
Bro try latest TWRP or install battery driver's
Click to expand...
Click to collapse
Battery drivers ?
jayanth619 said:
I have colour reproduction issue in screen.. colors are too warm. Even the videos I play have some sort of red color addition .. do have same issue?
Click to expand...
Click to collapse
calliberate using kernal auditor app
amargowda3250 said:
Bro try latest TWRP or install battery driver's
Click to expand...
Click to collapse
what is battery driver ??
Hello Guys, I just bought a Lenovo Z2 Plus and wanted to install a custom rom on it. I did my thorough research through XDA and Youtube about various OREO based custom roms available for this phone. I like the Pixel Experience Rom but I am a newbie in flashing custom roms. I read in few threads about network connectivity issues in the Pixel Experience Rom and Resurrection Remix rom as well. In few of the youtube videos, I saw that the battery backup and Antutu score of Pixel Experience rom is marginally lower when compared to Resurrection Remix.
Can you guys give me your opinion on which rom should I install on my stock device. Kindly please provide the respective rom's Antutu Benchmark scores and Screen On Time especially for the Pixel Experience Rom. Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Thanks.
I have tried the PE (Pixel Exp) ROM and here my observations on that.
The Good
Extremely fluid. Performance is mind blowing. I have tried 3 Custom ROM so far (AEX, RR, PE) and PE felt the best performing in terms day to day device usage. Feels like PE is meant for Z2 Plus and vise versa. Everything works out of the box, GApps are preloaded, ROM is simple but very effective. All sensors, every piece of hardware included in the phone works perfectly. I never felt it was a custom rom, felt like meant for Z2 Plus.
The Bad
Not just just pixel, this is present in all Custom ROM for me and my device. I am from India, and using Reliance Jio VoLTE.
Now the problem is network reception isn't as good as stock ZUI.
The 2.4GHz WiFi got limited to 72 mbps only. Stock ZUI has no problem, tried changing few ROMs and finally settled with AEX which I see can connect to 2.4GHz WiFi and 150 mbps. I have tried baseband 1.76 (ZUI 2.5.104 ST India) and baseband 1.70 (Latest) for ZUI 3.5.3xx China. Nothing seems to help. Out of 4 ROM, Stock ZUI (2.5/3.5), PE, RR, AEX, only ZUI and AEX are able to give me a 150 mbps wifi link speed.
Now regarding the VoLTE reception. VoLTE works fine but network is fluctuating like hell. For me, the same is present in all three custom rom I have tried. AEX, RR, PE. Tried baseband 1.70/1.76 but couldn't solve it. There are no call drops but network isn't stable at all. Tested with Reliance Jio NetVelocity app for detailed information and it seems with none of the Custom ROM, Phone is able to sustain a stable 2300 MHz link. Falls back to 1800 MHz and 850 MHz randomly. Network speed wasn't bad, infact I would say satisfactory.
Only ZUI seems to have a stable Jio reception for me.
The Ugly
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Presently using AEX ROM without any extra modification. Performance isnt as fuild as Pixel ROM but less problematic than others. Infact only ROM allowing me a 150mbps WiFi link speed.
Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Follow this guide to unlock the bootloader and install TWRP. Then installation processor of ROM will depend on which ROM you select. Note, there are two different ROM type now. 1. Full Treble 2. Non Treble. Installation process are different for them.
Pixel is a non treble ROM. Like 2 years ago, you would feel similar setup process.
If you chose Pixel, after you have unlocked and got TWRP installed,
1. download PE ROM
2. boot into TWRP
3. Wipe system, data, cache, dalvik
4. Flash ROM
5. Wipe Cache
6. Reboot
If all went ok, frist boot will take a few minutes and you will be asked to setup your Google Account under Pixel Exp ROM.
Remember, I am not an expert so wait for others to comment and guide you !! Just sharing from my personal experience !!
Good luck.
NaXal said:
I have tried the PE (Pixel Exp) ROM and here my observations on that.
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Click to expand...
Click to collapse
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
4tanmoy said:
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
@4tanmoy
One small mistake from my end. PE ROM comes with GApps included. So when you flash PE ROM, you don't need to Flash GApps again.
NaXal said:
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
Click to expand...
Click to collapse
thanks
4tanmoy said:
thanks
Click to expand...
Click to collapse
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
NaXal said:
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
Click to expand...
Click to collapse
Yes, I did some more research. Flashed PE with UberCool.
After Setup, I flashed AR Kernal and SuperSu.
Installed Google Camera Mod for HDR+ and Potrait Modes.
Flashed Dialer Fix to resolve the dialer problem as it showed that phone is not supported when launching dialer. now fixed.
The PE ui is butter smooth, phone doesnot heats anymore. Charged last night till 100 % and browsed youtube, downloaded my preferred apps from play store, browsed quora for 30 mins, took some pictures. In the morning I played subway surfers, clash royal, some web browsing, downloaded all remaining apps for my phone. The battery is now 59% while I typing this from the phone.
Overall, I am astonished by the PE smoothness and completely satisfied by the battery life.
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
NaXal said:
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
Click to expand...
Click to collapse
the wifi link speed is 72 mbps and about battery drainage overnight, i'll post tomorrow morning
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
4tanmoy said:
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
Click to expand...
Click to collapse
Thanks for the reply.
Your data is very similar to what I have experienced with Pixel ROM.
This drainage is one of the issue for which I had to move out of Pixel ROM
Excellent review, I too installed PE and is enjoying every bit of Pixel, but the main problem I am facing is ,my phone's all sensors are dead or not working has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Would like ask someone from the forum to please help me to fix the isaue, as far as Custom rom in Zuk 2 I will stick to Pixel as it is the best till now what ever I have used . I have TWRP installed has flashed sensor.zip available in the Zuk Forum but nothing seems to work.
Waiting for a reply from the forum members it they take out sometime to help a man is distress.
Kamal_halder said:
has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Click to expand...
Click to collapse
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
NaXal said:
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
Click to expand...
Click to collapse
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
If the issue is present with stock ROM also with bone stock phone, then it feels that the issue is with the Hardware.
Anyway, hope you find a solution and if you do, pls post that so that for reference if later down the some one needs he can fix his issue.
Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Lankapatiraawan said:
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Click to expand...
Click to collapse
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Kamal_halder said:
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Click to expand...
Click to collapse
How much for the display change?
I got a friend with cracked 3GB variant needing a display change. Just taking an idea about approximately how much you spent for this change
please release [ROM][A720f/A520f] [OFFICIAL] Resurrection Remix 6.0
Everyone like this please say!
I'm trying to build one for a5, but may be unsuccessful.
Wish me luck!
Plz post new RR 6 thread for A520F.....now running 5.8.5
@matkali https://www.androidfilehost.com/?fid=1322778262904014011
Here you go.
Thanks
sheepkill15 said:
@matkali https://www.androidfilehost.com/?fid=1322778262904014011
Here you go.
Click to expand...
Click to collapse
thanks for it
if you can port this for a720f
@sheepkill15 I have a question mate. Is there anything specific regarding the installaton process of your ROM? I installed your RR-O-v6.1.0-20180907 and 8.1 GApps mini but I've been sitting on a bootanimation for over 20 minutes now. Thanks for your effort and sharing the ROM with us.
SoloMid Hazard said:
@sheepkill15 I have a question mate. Is there anything specific regarding the installaton process of your ROM? I installed your RR-O-v6.1.0-20180907 and 8.1 GApps mini but I've been sitting on a bootanimation for over 20 minutes now. Thanks for your effort and sharing the ROM with us.
Click to expand...
Click to collapse
There's nothing special to be done, but yes, sometimes it's stuck in bootloop. What I usually do is:
Hard reset, wipe everything except microsd, delete the zip from sd card, copy it again and install again.
Idk why it needs sometimes to be flashed again, but that way it will boot for sure. A normal first boot with this rom should be around 7 minutes
sheepkill15 said:
There's nothing special to be done, but yes, sometimes it's stuck in bootloop. What I usually do is:
Hard reset, wipe everything except microsd, delete the zip from sd card, copy it again and install again.
Idk why it needs sometimes to be flashed again, but that way it will boot for sure. A normal first boot with this rom should be around 7 minutes
Click to expand...
Click to collapse
I got it to work, and it is great. I just have one more question. Do you have any recommendations on which gcam version to use? Thank you once again.
SoloMid Hazard said:
I got it to work, and it is great. I just have one more question. Do you have any recommendations on which gcam version to use? Thank you once again.
Click to expand...
Click to collapse
I don't know which version is good, I don't use it
watched reddish purple balls for about 20 minutes... did the 2nd round and after maybe 90 seconds I am checking it out. Thanks!
+1 ThX
while flashing on SM-A520S 90% flashing bar showing then this error come
Eror 1001 cant mount system
sorry for bad english
try many times also format every thing but still got this error
question
is there any bugs in this rom ? is it stable and support the Dual sim configuration means both sim card can be detected ? cuz am using HadesRom v4.5 it's cool! but i get fed up from the TOUCHWIZ and i want the original google roms give my A5 2017 the full power of CPU and GPU ! more faster and more powerful but with the original looks heavy sometimes after maybe a month of using !
thnx if you reply bro
Chiha ALi said:
is there any bugs in this rom ? is it stable and support the Dual sim configuration means both sim card can be detected ? cuz am using HadesRom v4.5 it's cool! but i get fed up from the TOUCHWIZ and i want the original google roms give my A5 2017 the full power of CPU and GPU ! more faster and more powerful but with the original looks heavy sometimes after maybe a month of using !
thnx if you reply bro
Click to expand...
Click to collapse
In the current build, the biggest problem is that the buttons dont light up, but I fixed that in the meantime, just haven't uploaded it yet. The other noticeable issue is that the battery life is not perfect. I'm working on it too. The radio isn't working yet, but you don't use it, there's nothing more.
I don't know about dual sim, since I have the normal one.
Does anybody else face a problem of a laggy front camera using apps like snapchat/messenger/instagram?
Thank you very much for this rom bro
problems are :
The Rom :
- Didn't detect my saved contacts on both sim cards.
- Didn't have the same quality of image but it's not bad.
- The calculator app still more than 1 min to open ( something weird)!
- Battery usage looks perfect !
- The configurations in settings gives a lot of helpful things such as the customization of the notification panel and the power menu !
.
so what i did now is that i rooted with magisk and i installed ( Root explorer R ) pro version and installed ( System apps uninstall ).
i deleted ( Calculator,Camera,browser,messaging,music player,gallery.....etc) then i installed an Alternative for them. so now i have my customized RR V6.2.0
it's awesome with root. But for who installed this rom you can go to settings and find the display PPI ( you will find it about 400ppi ) i changed it up to 424ppi( the original A5 2017 ppi ) and now works perfectly .
Feedback RR-O-v6.2.0-20180925-a5y17lte-Unofficial
sheepkill15 said:
I don't know which version is good, I don't use it
Click to expand...
Click to collapse
Friend I've been with your rom for a few days and it's the BEST ROM OF EVERYTHING! I say this in a matter of customization and having a purest experience that samsung ...
I have an A520F (two-chip model) and both are OK.
The problem is that it has some really annoying bugs as a problem to play media (especially songs that get squeaked and at first I was worried if my headphones had damaged), also has bugs in the camera that seem to limit their quality a lot, bugs in the interface in general that make the device reboot out of nowhere (it happened to me 1 or 2 times during the time I am with the rom on the device [4 days]), bugs on the physical buttons as previously said, among others ... These were the most important bugs I had with rom.
I have some suggestions for interesting implementations to make in the rom like stereo audio (it has this function in Hades), just leave the pixel launcher more notifications optimization on the always on display and one good thing I believe developers should do is provide a form of install a separate galaxy s9 camera package that is present in rom Hades for all roms.
You are doing a good job and good luck for more projects in the future. I'll probably record a YouTube video about your future rom and give you the credits.
Hi on the chinese bbs.nubia.cn site you can download a custom rom with android pie and nubia ui 6.0 for the nubia z17s. I've downloaded and installed this rom with twrp. Installed opengapps (mini) and magisk v20.
So far everything seems to work. After first boot you will get some chinese screens (just push the obvious buttons and after that you can choose for english or some other languages.
bluetooth, screen mirroring, wifi, nubia camera, play store, banking apps, netflix etc. all seem to work without any problems. I've installed a Gcam mod and it's also working. I've used his rom as my daily driver for the last few days without any problems.
Only problem is the extremely slow download of the rom from the Chinese site and you need a QQ account which took me some time to figure out (but with success).
I'm not sure if I can share this rom because I didn't have contact with the developer of the rom .
Shure, share it. If the Dev don´t like it this way he can contact you to delete it.
They say fingerprint doesn't work
Spencer_D said:
They say fingerprint doesn't work
Click to expand...
Click to collapse
I'm quit sure fingerprint works. I use it for unlocking the phone all the time. I don't use it for my banking app now (never tried).
edit: Just tried it with my banking app. Fingerprint works without any problems.
Tomcar said:
Shure, share it. If the Dev don´t like it this way he can contact you to delete it.
Click to expand...
Click to collapse
Allright I will share this file (temporary) https://www.dropbox.com/s/nth8ossj2tv3l7k/NX595J_9.0_UI_6.0.zip?dl=0
All credits to the developer of this rom!
Password?
Tomcar said:
Password?
Click to expand...
Click to collapse
No password needed. You can't open the zip?
Nope, same on 4PDA Thread.
https://translate.google.com/translate?depth=1&hl=de&rurl=translate.google.com&sl=ru&sp=nmt4&tl=en&u=http://4pda.ru/forum/index.php%3Fshowtopic%3D848164%26st%3D2400&xid=17259,15700022,15700186,15700191,15700256,15700259,15700262,15700265
Tomcar said:
Nope, same on 4PDA Thread.
https://translate.google.com/translate?depth=1&hl=de&rurl=translate.google.com&sl=ru&sp=nmt4&tl=en&u=http://4pda.ru/forum/index.php%3Fshowtopic%3D848164%26st%3D2400&xid=17259,15700022,15700186,15700191,15700256,15700259,15700262,15700265
Click to expand...
Click to collapse
But you're able to download the file?
another link maybe this one works. There is no password on the zip. https://drive.google.com/file/d/11gaDzVCxAk0KnjxgG9MJbCsUI1fEDxsL/view?usp=sharing
ronvanv said:
But you're able to download the file?
another link maybe this one works. There is no password on the zip. https://drive.google.com/file/d/11gaDzVCxAk0KnjxgG9MJbCsUI1fEDxsL/view?usp=sharing
Click to expand...
Click to collapse
Both zips are passworded. One from your link (9) and another from original link (8). I can open zip but can't unzip (copy files from it) without password.
The download is not the problem
Spencer_D said:
Both zips are passworded. One from your link (9) and another from original link (8). I can open zip but can't unzip (copy files from it) without password.
Click to expand...
Click to collapse
hmm strange on one of my computers I can open en unzip without any problems on my other computer a need a password?
I also installed the zip file without any problems on my phone?
edit: I think I know. You need another version of 7zip. In moved my 7zip from my computer to my other computer and now I'm able to open the zip on both my computers. You can download from https://www.7-zip.org/ I downloaded the latest version for 64bit for windows and can open and extract the zip without problems
Okay, short review:
Installation is a bit tricky, I recommend Fingerprint setup after the global Google setup.
Translation is crap (for german users), most of settings remain in english.
GPS can´t be changed to battery saving, same as on Syberia 2.3
On the techical side everything seems to work, fingerprint works perfectly, NFC i don´t know because I´m not using it.
Livewallpaperpicker is installed, now I can use KLWP
Deep sleep is working, maybe one can try the Vendor an Kernel with PT.
Battéry loss is 10% overnight.
Thanx again for sharing.
Tomcar said:
Okay, short review:
Installation is a bit tricky, I recommend Fingerprint setup after the global Google setup.
Translation is crap (for german users), most of settings remain in english.
GPS can´t be changed to battery saving, same as on Syberia 2.3
On the techical side everything seems to work, fingerprint works perfectly, NFC i don´t know because I´m not using it.
Livewallpaperpicker is installed, now I can use KLWP
Deep sleep is working, maybe one can try the Vendor an Kernel with PT.
Battéry loss is 10% overnight.
Thanx again for sharing.
Click to expand...
Click to collapse
NFC is working. Just checked
Anyone manage to download the TWRP 3.3 mentioned in the BBS post of this ROM? And can share?
https://bbs.nubia.cn/thread-1533443-1-1.html
Slowdeath said:
Anyone manage to download the TWRP 3.3 mentioned in the BBS post of this ROM? And can share?
https://bbs.nubia.cn/thread-1533443-1-1.html
Click to expand...
Click to collapse
https://yadi.sk/d/_JtntCUGpZHqEg
Slowdeath said:
Anyone manage to download the TWRP 3.3 mentioned in the BBS post of this ROM? And can share?
https://bbs.nubia.cn/thread-1533443-1-1.html
Click to expand...
Click to collapse
I used twrp 3.3.1.1. from 4pda https://drive.google.com/file/d/1h5-ITW_kdyyO_h8aylJji39NLlt2ots5/view
I use TWRP Exclusive by NFound - everything works great. http://4pda.ru/forum/index.php?showtopic=848164&view=findpost&p=80877748
Link for download - https://androidfilehost.com/?w=files&flid=287985
And little bit tried Nubia 6.0 Pie - http://4pda.ru/forum/index.php?showtopic=848164&view=findpost&p=80877748
The biggest problem is what i observed on every Nubia Color Os Rom: It´s extremly slow compared to PT Roms. Starting a third-party app take it´s time, you don´t believe this is a SD835.
This is a absolute no go for me.
Tomcar said:
The biggest problem is what i observed on every Nubia Color Os Rom: It´s extremly slow compared to PT Roms. Starting a third-party app take it´s time, you don´t believe this is a SD835.
This is a absolute no go for me.
Click to expand...
Click to collapse
Strange I used havoc 2.9 and Mokee 9 before and don't notice any performance differences compared to this rom? Which 3-party app is slow?
What could be is that Nubia is killing background services more aggressive? But you can whitelist apps!
I notice the battery consumption on this rom is much better than any rom rom I've tried so far. With PT roms I couldn't make it till the end of the day without charging.