Hey! Day 2 with my new tablet here I spent some time today getting myself root access and set up Xposed... OK, I really set up Xposed. It's been a while since I've looked through the repo so there were a ton of new modules. Very clearly some thing(s) aren't getting along. I had no problems whatsoever after attaining root and installing Wanam's Xposed. I can't even check atm how many modules I have because I'm getting an insta-reboot after launching most apps but it's more than 10. There are a few that I'm pretty sure are working fine because I was able to see them in action.
The ones I'm pretty sure these are working ok:
Xposed Additions
Xui Mod
Gravity Box (LP) (make changes slowly or it could cause problems)
Greenify
Hmm, that's all I can think of atm... a lot of the ones I'm unsure of are probably fine, but their effects are harder to observe so I'll list those last.
Don't seem to be working:
XStana
Wanam LP (? not sure about that)
Net Speed Indicator
iFont (? this might work... can't test it though)
Unsure if problematic:
Amplify
Unbeloved Hosts (? not sure... hope so though)
Play Permissions Exposed
Unicon (disappointingly definitely doesn't work, really like this one)
Those are all I can think of without being able to see what else, but I have a few more. Does anyone use/have any info on the modules I've listed? Anything else you're using that's worthwhile?
One last question: Does anyone happen to remember the key combo to boot with Xposed disabled? I just can't think of it right now....
Thanks! Hope to get some good Xposed/module discussion going in here :good:
Hi,can you post small tutorial how you install Xposed?
Wysłane z mojego SM-T715 przy użyciu Tapatalka
dawidek1258 said:
Hi,can you post small tutorial how you install Xposed?
Wysłane z mojego SM-T715 przy użyciu Tapatalka
Click to expand...
Click to collapse
Surely, tutorial and files located here: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
I have wanam, gravity box, greenify, and blurred UI working fine here. Oh yeah, YouTube adaway too,
Bubba Fett said:
I have wanam, gravity box, greenify, and blurred UI working fine here. Oh yeah, YouTube adaway too,
Click to expand...
Click to collapse
Cool, glad to hear that Gravity Box works; I was reluctant to try it.
jazzmachine said:
Cool, glad to hear that Gravity Box works; I was reluctant to try it.
Click to expand...
Click to collapse
I've found you have to turn them on slowly tho. Too many system UI changes at once cause problems.
Bubba Fett said:
I've found you have to turn them on slowly tho. Too many system UI changes at once cause problems.
Click to expand...
Click to collapse
Seems to be the case. I really like having a nav bar. Were you able to get any status bar changes to take? Center clock or net speed indicator for instance?
Also have you tried xui mod? I really like that one, some awesome visual effects.
jazzmachine said:
Seems to be the case. I really like having a nav bar. Were you able to get any status bar changes to take? Center clock or net speed indicator for instance?
Also have you tried xui mod? I really like that one, some awesome visual effects.
Click to expand...
Click to collapse
I have tried xui on my note 4 and had it working as well as the s2 on 5.0, but haven't tried it on 5.1. I love that mod. I boot looped but I think it was too many mods at one time.
I have gotten center clock to work from either wanam or gravity box. Cant remember. But one of them worked for that. Also stock battery to dotted circle with Gravity. Those devs are great. They will make it happen eventually.
jazzmachine said:
Don't seem to be working:
iFont (? this might work... can't test it though)
:
Click to expand...
Click to collapse
iFont is typically one of the first apps I install when I get a new device so I usually set it up before I root. I've always wondered what are the differences between the app and the xposed mod for iFont?
shanda5303 said:
iFont is typically one of the first apps I install when I get a new device so I usually set it up before I root. I've always wondered what are the differences between the app and the xposed mod for iFont?
Click to expand...
Click to collapse
That's a good question... the answer to which I have no idea I forgot that it was also an app so thanks for the reminder. I can't really see what the advantage to the Xposed mod would be; the S2 doesn't seem to like having too many modules running. The app works great though :good:
jazzmachine said:
That's a good question... the answer to which I have no idea I forgot that it was also an app so thanks for the reminder. I can't really see what the advantage to the Xposed mod would be; the S2 doesn't seem to like having too many modules running. The app works great though :good:
Click to expand...
Click to collapse
Lol no problem ?
Bubba Fett said:
I have wanam, gravity box, greenify, and blurred UI working fine here. Oh yeah, YouTube adaway too,
Click to expand...
Click to collapse
Which Wanam apk are you using?
rfb813 said:
Which Wanam apk are you using?
Click to expand...
Click to collapse
I restored from TB, but I believe it was just the normal LP wanam from the modules menu in xposed. To my knowledge there only KK and LP options.
rfb813 said:
Which Wanam apk are you using?
Click to expand...
Click to collapse
I'm also using the latest Wanam [LP] module from the repo. Not all, but many of the modifications work fine :good:
I am using DoubleTaptoSleep, GravityBox(not all function working well), Wanam Xposed LP, Notification count.
I use with 5.1.1 and xposed:
- Amplify
- Greenify
- Wanam Xposed
- Youtube AdAway
- Youtube Background Playback
Everything works fine but Wanam... Not every option works.
A note about Gravity Box that'll hopefully be helpful to others - the newest version (5.34) messed up some things with my setup. Removal of the nav bar was the most noticeable example but there were a couple of other things. Version 5.33 worked fine so I'm going to stick with that one for now on my S2.
jazzmachine said:
A note about Gravity Box that'll hopefully be helpful to others - the newest version (5.34) messed up some things with my setup. Removal of the nav bar was the most noticeable example but there were a couple of other things. Version 5.33 worked fine so I'm going to stick with that one for now on my S2.
Click to expand...
Click to collapse
One Question: The XPosed-Framework is for Android 5.1.1 and 6.0. Galaxy Tab S2 is still on 5.0.2.
There is only one custom Rom for Tab S2 from 21.09.2015. Do you know if some other custom roms are coming? Or dont the delevelopers like the tab s2?
a.affe said:
One Question: The XPosed-Framework is for Android 5.1.1 and 6.0. Galaxy Tab S2 is still on 5.0.2.
There is only one custom Rom for Tab S2 from 21.09.2015. Do you know if some other custom roms are coming? Or dont the delevelopers like the tab s2?
Click to expand...
Click to collapse
I'd surely whip one up for my 817T if I could The tablet is is still somewhat new... another consideration is the Exynos processor which tends to lead to less development vs. Qualcomm devices. I would love to run a custom ROM and kernel on my S2 but I really enjoy it and use it a ton just stock rooted. I can't send out enough thanks to @ashyx for laying out the root method for my variant and all of his help otherwise :good:
So to answer your question, we shall see
jazzmachine said:
I'd surely whip one up for my 817T if I could The tablet is is still somewhat new... another consideration is the Exynos processor which tends to lead to less development vs. Qualcomm devices. I would love to run a custom ROM and kernel on my S2 but I really enjoy it and use it a ton just stock rooted. I can't send out enough thanks to @ashyx for laying out the root method for my variant and all of his help otherwise :good:
So to answer your question, we shall see
Click to expand...
Click to collapse
I have the 810 9.7 Wifi. Would love to have a great custom Rom like Alliance Rom....
Related
I have Cablevision/Optimum and they claim that you can watch programs and manage your DVR from the Optimum app. But I have repeatedly tried to get it working and it just force closes every time. I've tried on different ROMs, on Wifi, on Mobile. Nothing works.
Anyone ever got it working?
Techngro said:
I have Cablevision/Optimum and they claim that you can watch programs and manage your DVR from the Optimum app. But I have repeatedly tried to get it working and it just force closes every time. I've tried on different ROMs, on Wifi, on Mobile. Nothing works.
Anyone ever got it working?
Click to expand...
Click to collapse
Nope, I have same problem bro....
Same problem here. Really frustrating.
Sent from my ZeroLemon Powered Galaxy Note 3
xposed
you must have xposed , its an old bug in xposed that prevents optimum from working. UNinstall xposed and it will fire right up
jmichaels1982 said:
you must have xposed , its an old bug in xposed that prevents optimum from working. UNinstall xposed and it will fire right up
Click to expand...
Click to collapse
That's too bad. I'm using a ROM that I think has Xposed as part of the ROM, so it doesn't let me uninstall it. I would really love to get the optimum app working though. Maybe i'll back this ROM up and test it on my stock ROM I have saved.
EDIT: Dude, I've searched google for a long time trying to find a solution, and nothing. But thanks to you, I finally know what the issue is. The only problem now is, I don't really want to choose between Xposed, which I love, and Optimum, which I kinda really need.
another solution
Techngro said:
That's too bad. I'm using a ROM that I think has Xposed as part of the ROM, so it doesn't let me uninstall it. I would really love to get the optimum app working though. Maybe i'll back this ROM up and test it on my stock ROM I have saved.
Click to expand...
Click to collapse
just get into the xposed app and choose uninstall xposed from the xposed interface itself. then test and see if that lets optimum work
So it's Xposed causing the problem. I wondered why it works on my Note 10.1 and Nexus 7 but my Note 3 just keeps trying to load it. I can live with that. My Note 10 is much better suited for it anyway.
jmichaels1982 said:
just get into the xposed app and choose uninstall xposed from the xposed interface itself. then test and see if that lets optimum work
Click to expand...
Click to collapse
Wow. You're just full of useful information today. I'm adding you to my 'go-to' list for questions.
forgot to mention
Techngro said:
Wow. You're just full of useful information today. I'm adding you to my 'go-to' list for questions.
Click to expand...
Click to collapse
Xposed developer posted a fix for optimum, which would start the app, to control your dvr and such, but it didn't fix the live tv steam for me. Go to xposed and make sure you are up to date on the frame work and search IrdetoFix [1.0]. let us know if you can stream tv with it.
Do you guys have the problem with an error and flashing of the screen / stealing focus from other apps every second?
jmichaels1982 said:
Xposed developer posted a fix for optimum, which would start the app, to control your dvr and such, but it didn't fix the live tv steam for me. Go to xposed and make sure you are up to date on the frame work and search IrdetoFix [1.0]. let us know if you can stream tv with it.
Click to expand...
Click to collapse
great info... going for that update now. Wish it was auto update! I am on the ATT Note 3 though
yep
ryaske said:
Do you guys have the problem with an error and flashing of the screen / stealing focus from other apps every second?
great info... going for that update now. Wish it was auto update! I am on the ATT Note 3 though
Click to expand...
Click to collapse
Yep thats the xposed bug every one experiences on optimum app
jmichaels1982 said:
Xposed developer posted a fix for optimum, which would start the app, to control your dvr and such, but it didn't fix the live tv steam for me. Go to xposed and make sure you are up to date on the frame work and search IrdetoFix [1.0]. let us know if you can stream tv with it.
Click to expand...
Click to collapse
Just found this module a few minutes ago and about pooped myself, then I loaded it and found that LiveTV still doesn't work. Did you ever get it working?
Nope
breakerfall said:
Just found this module a few minutes ago and about pooped myself, then I loaded it and found that LiveTV still doesn't work. Did you ever get it working?
Click to expand...
Click to collapse
Never, and I didn't want to bother the dev anymore.
I bumped into this perfect module for Xperia. And it works for X as well.
I figured I should let you guys know about this - it's annoying as hell when camera functions shut down just because the phone got a bit hotter than skin temperature.
It targets the camera only so you shouldn't worry about the kernel thermal cutoff - it only sends null temp values to the camera.
Check it out on dev's thread http://forum.xda-developers.com/cro...-camera-xperia-thermal-disabler-v1-0-t3455087 I tested it against a hairdryer and it's working.
Huge thanks to @Michele2 for this module. I was just about to start tweaking the thermal-conf - no need now.
Thanks for the mod, how did you gt xposed to work on nougat?
kistigun said:
Thanks for the mod, how did you gt xposed to work on nougat?
Click to expand...
Click to collapse
Well that that's because I'm still on Marshmallow. Xposed is love )) can't use the phone without it
Sebi673 said:
Well that that's because I'm still on Marshmallow. Xposed is love )) can't use the phone without it
Click to expand...
Click to collapse
Haha, that explains a lot in that case I'll wait for xposed nougat support
Sebi673 said:
I bumped into this perfect module for Xperia. And it works for X as well.
I figured I should let you guys know about this - it's annoying as hell when camera functions shut down just because the phone got a bit hotter than skin temperature.
It targets the camera only so you shouldn't worry about the kernel thermal cutoff - it only sends null temp values to the camera.
Check it out on dev's thread http://forum.xda-developers.com/cro...-camera-xperia-thermal-disabler-v1-0-t3455087 I tested it against a hairdryer and it's working.
Huge thanks to @Michele2 for this module. I was just about to start tweaking the thermal-conf - no need now.
Click to expand...
Click to collapse
Thanks for mention: :good: :good:, you have right my module is very helpful because only camera is involved.
Michele2 said:
Thanks for mention: :good: :good:, you have right my module is very helpful because only camera is involved.
Click to expand...
Click to collapse
You're welcome! Also try adding it to xposed repo for better visibility!
Sebi673 said:
You're welcome! Also try adding it to xposed repo for better visibility!
Click to expand...
Click to collapse
I will do today ??
Curious is there was a app or mod for rooted phones that will kill ads inside apps?
umx said:
Curious is there was a app or mod for rooted phones that will kill ads inside apps?
Click to expand...
Click to collapse
Best thing is minminguard but you neee xposed:
http://repo.xposed.info/module/tw.fatminmin.xposed.minminguard
If anyone can suggest any non-xposed alternative I'd be keen to learn of it!
cd993 said:
Best thing is minminguard but you neee xposed:
http://repo.xposed.info/module/tw.fatminmin.xposed.minminguard
If anyone can suggest any non-xposed alternative I'd be keen to learn of it!
Click to expand...
Click to collapse
cool ya i have xposed installed already
AdAway 3.2
ok ill try em both, id love to get rid of ads in instagram for sure.
galaxys said:
AdAway 3.2
Click to expand...
Click to collapse
Adaway 3.3 . It's been a long time coming! :good:
I prefer AdGuard. It's worked for me for quite a long time now. I've never used AdAway. I'm not sure which is better.
So far none of these work on Instagram which sucks. Must have their own special way to annoy us.
v12xke said:
Adaway 3.3 . It's been a long time coming! :good:
Click to expand...
Click to collapse
Well, surprise surprise!
galaxys said:
Well, surprise surprise!
Click to expand...
Click to collapse
Bugfixed version HERE. Sorry, was catching up reading the thread a few weeks back and then hit a newer "beta" which fixed a problem with the initial release. When it is final it will be posted in the OP and F-Droid.
I'm using DNS66 from Fdroid. Small app, simple and it works. Just make sure you use right hosts. The default hosts started showing some ads so I replaced all hosts with just one - from https://forum.xda-developers.com/showthread.php?t=1916098
Did some reading I guess on Instagram of you report the ads as in appropriate will get rid of them and over a week you should see far less or none.
Can anyone confirm that Substratum themes work on this phone?
Substratum wont work on this phone until we have root. Android Pie only allows Substratum to work on rooted phones due to Google's deletion of the overlay management service.
Cool, thank you. It's working on other rooted devices running Pie right? So it's a pretty good shot it'll just work once we have root?
cantara256 said:
Cool, thank you. It's working on other rooted devices running Pie right? So it's a pretty good shot it'll just work once we have root?
Click to expand...
Click to collapse
It's working with Pie on the rooted Pixel 2XL...
Archangel said:
Substratum wont work on this phone until we have root. Android Pie only allows Substratum to work on rooted phones due to Google's deletion of the overlay management service.
Click to expand...
Click to collapse
did they say why they deleted the overlay management system? That was a great addition to the Oreo version.
Oh yeah any other device running Pie that is rooted Substratum should work fine depending on the theme. Once we get root we should be good to go.
cantara256 said:
Cool, thank you. It's working on other rooted devices running Pie right? So it's a pretty good shot it'll just work once we have root?
Click to expand...
Click to collapse
---------- Post added at 01:43 PM ---------- Previous post was at 01:39 PM ----------
They probably wont ever say but they dont like us tinkering around with their apps. There was a petition to keep OMS in Pie but they just ignored it and decided, as they usually do, to do what they want. Its the same thing with the Old style navbar,,,the code was there like OMS, just leave it in there for users to use it if they want. I have been with Android since it started and the "freedoms" we once enjoyed are being slowly eroded and choices taken away. Pretty soon we will be Apple and everything will be proprietary.
Annnnd yet another feature taken away from us! I mean really,,,I use this feature just about everyday and now its gone probably like this Pixel 3 will be when I send it back to Google!
https://www.androidpolice.com/2018/10/19/pixel-3-drops-support-voice-match-unlocking/
freebee269 said:
did they say why they deleted the overlay management system? That was a great addition to the Oreo version.
Click to expand...
Click to collapse
Archangel said:
Substratum wont work on this phone until we have root. Android Pie only allows Substratum to work on rooted phones due to Google's deletion of the overlay management service.
Click to expand...
Click to collapse
I think they just blocked 3rd party overlays, not dropped OMS completely. IF there was no OMS, then Substratum wouldn't work properly, right? A ROM would need the necessary commits from Subs team (frameworks, etc), like we had to do with Nougat. Yet, you can run it on stock AOSPie, as long as you're rooted.
I may have it wrong, lol, I know I'm just ready to get my P3XL
Root is hopefully right around the corner and then Substratum can work,,,cant wait!
NepoRood said:
I think they just blocked 3rd party overlays, not dropped OMS completely. IF there was no OMS, then Substratum wouldn't work properly, right? A ROM would need the necessary commits from Subs team (frameworks, etc), like we had to do with Nougat. Yet, you can run it on stock AOSPie, as long as you're rooted.
I may have it wrong, lol, I know I'm just ready to get my P3XL
Click to expand...
Click to collapse
Archangel said:
Root is hopefully right around the corner and then Substratum can work,,,cant wait!
Click to expand...
Click to collapse
I saw a few posts that indicated that subs not working after rooting
Oh no I rooted as easy as any other phone and my themes applied fine. Some people may not be applying the themes right on Pie. I was even able to get rid of that God awful gesture navbar and get the old one back so I can flash my navbar theme.
lollyjay said:
I saw a few posts that indicated that subs not working after rooting
Click to expand...
Click to collapse
Archangel said:
Oh no I rooted as easy as any other phone and my themes applied fine. Some people may not be applying the themes right on Pie. I was even able to get rid of that God awful gesture navbar and get the old one back so I can flash my navbar theme.
Click to expand...
Click to collapse
Good to know
Archangel said:
Oh no I rooted as easy as any other phone and my themes applied fine. Some people may not be applying the themes right on Pie. I was even able to get rid of that God awful gesture navbar and get the old one back so I can flash my navbar theme.
Click to expand...
Click to collapse
Not sure why I didn't try it. I just assumed it wouldn't work. Not only does it work, everything is themed.
Thanks for saying something. That white ui was painful.
Swift Black on the 3 XL is a God send
Now in all the System and Google apps, you can't even tell there's a notch. Everything has a beautiful silky black look, and you just see the time in upper left and network info in upper right, and no idea there's even a notch in the middle as everything is black which totally hides the notch completely, but it's nice to see that info in the upper corners, makes the screen look like it goes all the way to the edge.
Archangel said:
Oh no I rooted as easy as any other phone and my themes applied fine. Some people may not be applying the themes right on Pie. I was even able to get rid of that God awful gesture navbar and get the old one back so I can flash my navbar theme.
Click to expand...
Click to collapse
Can you please share the right way to apply themes on Pie?
gettingerr said:
Can you please share the right way to apply themes on Pie?
Click to expand...
Click to collapse
Unless the procedure is different on the P3XL as compared to my P2XL on Pie, the procedure is as follows.
Install the latest substratum from the play store, and grant it root and storage permissions.
Download a quality theme, and there are several.
Open substratum and tick the theme you want to apply.
Select "build and update" to create the overlays you want. Once done, reboot the phone, then go to substratum again, open the manager, then check your overlays, and select enable.
That should do it :good:
I think someone already answered but most forget to go back into Substratum and click enable on all the overlays that you built previously then rebooted. Its not like Oreo where all you had to do was just build and enable. Now, you have to build and enable then reboot and go back into manager and enable the built overlays again.
gettingerr said:
Can you please share the right way to apply themes on Pie?
Click to expand...
Click to collapse
I am themed on the Swift series, but I did not know about this rebooting and enabling again. I was wondering why it wasn't working at first I would reboot go back into it and then an able again just out of frustration that knowing that was the right way to do it but seems weird to have to do that extra stuff now
Archangel said:
Oh no I rooted as easy as any other phone and my themes applied fine. Some people may not be applying the themes right on Pie. I was even able to get rid of that God awful gesture navbar and get the old one back so I can flash my navbar theme.
Click to expand...
Click to collapse
Can confirm themes work just have to reboot after applying them and re enable them after reboot.
If I may ask how did you change the navbar ? And put those icons ?
I made a Google doc and posted the link below for my themes to help people that may run into problems,,,if you scroll down the last page there is a guide to enable the old style navbar. The icons are part of my Substratum theme Amazed Navbars.
https://docs.google.com/document/d/1LqNd7pltj3G0rPopgW11PybpcCQCNufMblvl6lUb2Tk/edit?usp=sharing
iixAndroidx said:
Can confirm themes work just have to reboot after applying them and re enable them after reboot.
If I may ask how did you change the navbar ? And put those icons ?
Click to expand...
Click to collapse
Archangel said:
Oh no I rooted as easy as any other phone and my themes applied fine. Some people may not be applying the themes right on Pie. I was even able to get rid of that God awful gesture navbar and get the old one back so I can flash my navbar theme.
Click to expand...
Click to collapse
How did you get the Nav Bar back? I hate the way it is now and would prefer doing something similar to what you did - ? if you can share that would be awesome - thanks
Never mind - I found the guide for changing back to the old Navigaiton menu - https://www.firstpost.com/tech/news-analysis/heres-how-to-revert-to-the-old-three-button-navigation-system-on-google-pixel-3-5418351.html Thanks
Hey all moving up from my OP 7 pro to the OP 9 pro. What are all the magisk modules everyone is using on the OP 9 pro.?
1.Anything to force full screen mode on all apps? The settings for full screen apps dont include all the apps im using as some of the developers of the apps havent made it possible I'm sure.
2. I know Android 11 made changes to the navigation hide feature, is there anything that can be used to hide the navigation bar, and no i don't like navigation gestures option
Right now i am using
1. Substratum
2. Systemless Hosts
3. Full Dolby
One app im using that i have used since my 6T that isn't a magisk module but i cant live without it is a Plus Beat and it still works perfect on my 9pro
Thanks for the suggestions, cant wait to hear what everyone is using!!
Ultraman666 said:
Hey all moving up from my OP 7 pro to the OP 9 pro. What are all the magisk modules everyone is using on the OP 9 pro.?
1.Anything to force full screen mode on all apps? The settings for full screen apps dont include all the apps im using as some of the developers of the apps havent made it possible I'm sure.
2. I know Android 11 made changes to the navigation hide feature, is there anything that can be used to hide the navigation bar, and no i don't like navigation gestures option
Right now i am using
1. Substratum
2. Systemless Hosts
3. Full Dolby
Thanks for the suggestions, cant wait to hear what everyone is using!!
Click to expand...
Click to collapse
What's Full Dolby?
vibrantliker said:
What's Full Dolby?
Click to expand...
Click to collapse
Check out this thread
Working Dolby Atmos
Hello Has anyone managed to install full Dolby Atmos on Oneplus 9 Pro? I tried to install apk from this thread and magisk module from this link but none of them seems to work. Can't even install this module due to "read-only manifest.xml" error.
forum.xda-developers.com
I'm currently using Gvisual mod, evolve sans evo(font), cyberpunk audio, QS blur enabler, systemless hosts, webview manager.
Shooter7889 said:
I'm currently using Gvisual mod, evolve sans evo(font), cyberpunk audio, QS blur enabler, systemless hosts, webview manager.
Click to expand...
Click to collapse
interesting i havent heard of a couple of those, thanks i will check them out
Ultraman666 said:
interesting i havent heard of a couple of those, thanks i will check them out
Click to expand...
Click to collapse
Yes I really like the font. It was one that came on the cyberpunk 8t.. And the audio one as well. I'll see if I can get the zips uploaded here.
Currently using:
CloudFlareDNS
Debloater
Systemless hosts
Universal GMS Doze
Planning to install Viper but haven't yet. I also tried ACC but couldn't get it working so I just disabled it.
I wish I could find a way to add a battery bar above the status bar. I used to use RICE tweaks for that on my OP7P. I know there's a way with Xposed too, but I really don't want to mess with that.
Here are 2 of the modules
Shooter7889 said:
Here are 2 of the modules
Click to expand...
Click to collapse
Wow thanks man
terlynn4 said:
Currently using:
CloudFlareDNS
Debloater
Systemless hosts
Universal GMS Doze
Planning to install Viper but haven't yet. I also tried ACC but couldn't get it working so I just disabled it.
I wish I could find a way to add a battery bar above the status bar. I used to use RICE tweaks for that on my OP7P. I know there's a way with Xposed too, but I really don't want to mess with that.
Click to expand...
Click to collapse
Why cloudflare module? You can just type one.one.one.one under private DNS settings, under network settings.
Burt Squirtz said:
Why cloudflare module? You can just type one.one.one.one under private DNS settings, under network settings.
Click to expand...
Click to collapse
Thanks for the tip!
Burt Squirtz said:
Why cloudflare module? You can just type one.one.one.one under private DNS settings, under network settings.
Click to expand...
Click to collapse
Mmmm didnt know that either thanks
Currently having these modules installed :
OnePlus Sans (for system-wide font application)
Swift Installer module (Installed by Swift Installer)
Systemless hosts (for AdAway)
Youtube Vanced (Old module, had to install so it could overwrite the newer YT app on the device, allowing updates from Vanced App)
terlynn4 said:
I wish I could find a way to add a battery bar above the status bar. I used to use RICE tweaks for that on my OP7P. I know there's a way with Xposed too, but I really don't want to mess with that.
Click to expand...
Click to collapse
What about Energy Bar? I'm currently using this on my OP9 Pro. As I type this I also noticed the same developer has a version which puts a battery ring around the punch-hole camera if you prefer that sort of thing (I might try it myself).
oddlyspaced said:
Youtube Vanced (Old module, had to install so it could overwrite the newer YT app on the device, allowing updates from Vanced App)
Click to expand...
Click to collapse
Another way to do that is to uninstall the system YT app with a debloater tool (I use debloater magisk module for that) and then use Vanced app to install. Just throwing it out there, since the Vanced magisk module isn't supported anymore and may not work on future versions.
jonitfcfan said:
What about Energy Bar? I'm currently using this on my OP9 Pro. As I type this I also noticed the same developer has a version which puts a battery ring around the punch-hole camera if you prefer that sort of thing (I might try it myself).
Click to expand...
Click to collapse
Thanks! That will certainly work for now. I'd personally prefer a root solution over using accessibility service, but I'll take what I can get.
terlynn4 said:
Another way to do that is to uninstall the system YT app with a debloater tool (I use debloater magisk module for that) and then use Vanced app to install. Just throwing it out there, since the Vanced magisk module isn't supported anymore and may not work on future versions.
Click to expand...
Click to collapse
Tried that. Seems like there's a vestige YT sitting in root. I can see a folder and apk but can't delete it. I'm rooted btw.
jonitfcfan said:
What about Energy Bar? I'm currently using this on my OP9 Pro. As I type this I also noticed the same developer has a version which puts a battery ring around the punch-hole camera if you prefer that sort of thing (I might try it myself).
Click to expand...
Click to collapse
I totally forgot about the punch hole battery thanks for the reminder
Skenderbeggar said:
Tried that. Seems like there's a vestige YT sitting in root. I can see a folder and apk but can't delete it. I'm rooted btw.
Click to expand...
Click to collapse
Weird, I've been doing it this way after each update with this phone without any issues. Glad you have a working method at least.
terlynn4 said:
Currently using:
CloudFlareDNS
Debloater
Systemless hosts
Universal GMS Doze
Planning to install Viper but haven't yet. I also tried ACC but couldn't get it working so I just disabled it.
I wish I could find a way to add a battery bar above the status bar. I used to use RICE tweaks for that on my OP7P. I know there's a way with Xposed too, but I really don't want to mess with that.
Click to expand...
Click to collapse
Energy Bar