Develop Bugs

[ROM][SPH-L900/T0LTESPR][JB][4.3] CyanogenMod 10.2 official nightlies

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
First time installing CyanogenMod 10.2 to your Galaxy Note 2 L900, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
Upgrading from CyanogenMod 10:
- Read known issues ans FAQs
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
DOWNLOADS
CM10.2 official nightly builds:
http://www.get.cm/?device=l900
Google Apps:
http://goo.im/gapps
CHANGELOG
http://changelog.bbqdroid.org/#l900/cm10.2/next
BUG LIST
-GPS: To get a lock using the new opensource gps use the workaround provided by Kejar: http://forum.xda-developers.com/showpost.php?p=39761558&postcount=702
-BT Voice Search
-5ghz wifi - seems to only work with low channels
-Minor graphical issues (occasional black screen)
Common t0lte issues: http://teamhacksung.org/wiki/index.p...y:Known_issues
Frequently asked Questions: http://teamhacksung.org/wiki/index.p...0.1:t0lte:FAQs
Wiki: http://teamhacksung.org/wiki/index.php/Main_Page
TEAMHACKSUNG SUPPORT CHAT
Webchat: http://webchat.freenode.net/?channel...cksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!

Awesome great job
Rockin it from my Macknote2

Sweet !
Android...A New Digital Revolution Of Incredible Developers...

Thanx alot! Been waiting on this.
Sent from my SPH-L900 using Tapatalk 2

Awesome!!! Downloading now...
Sent from my SPH-L900 using xda premium

Fantastic. Looking forward to testing it out.

So i just installed this and tried Focal. When in portrait mode I was able to get it to go to pick picsphere but it starts going nuts when rotating device to landscape. I then try to launch Focus or the Camera app and it cannot connect to camera. So thats an issue. Also, I was not getting 4G/LTE in an area I know I get it in. Trying to reload stock to get the locks for GPS and to update my profiles then will try again.

Sweetness!
Thank you sir
Sent from my SPH-L900 using xda app-developers app

nottoosmart said:
So i just installed this and tried Focal. When in portrait mode I was able to get it to go to pick picsphere but it starts going nuts when rotating device to landscape. I then try to launch Focus or the Camera app and it cannot connect to camera. So thats an issue. Also, I was not getting 4G/LTE in an area I know I get it in. Trying to reload stock to get the locks for GPS and to update my profiles then will try again.
Click to expand...
Click to collapse
Same issue with Focal....have to reboot to reconnect to camera
Sent from my SPH-L900 using xda premium

The advanced menu seems to have been taken out. So we can no longer turn off the back light on the capacitive keys nor save battery by turning off the stylus layer.
Is it going to be merged again?

(From the old thread.)
When attempting to compile CM 10.2 from source, the build process stops with this error message:
Code:
Import includes file: /home/ace/android/cm-10.2-clean/out/target/product/l900/obj/EXECUTABLES/mdnsd_intermediates/import_includes
Export includes file: external/mdnsresponder/Android.mk -- /home/ace/android/cm-10.2-clean/out/target/product/l900/obj/EXECUTABLES/mdnsd_intermediates/export_includes
make: *** [b]No rule to make target[/b] `/home/ace/android/cm-10.2-clean/out/target/product/l900/obj/SHARED_LIBRARIES/libTVOut_intermediates/export_includes', [b]needed by[/b] `/home/ace/android/cm-10.2-clean/out/target/product/l900/obj/EXECUTABLES/mediaserver_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
Notice file: frameworks/base/cmds/media/NOTICE -- /home/ace/android/cm-10.2-clean/out/target/product/l900/obj/NOTICE_FILES/src//system/bin/media.txt
Would someone please explain what this message indicates.

ROM looks good so far. Fast. Smooth. But have the options to change the DPI been removed? I can't find them anywhere.
Sent from my SPH-L900 using xda app-developers app

Awesome, you are the man sbrissen!
Just so you know though, your links to teamhacksung are broken at least for me.

qwasz123 said:
The advanced menu seems to have been taken out. So we can no longer turn off the back light on the capacitive keys nor save battery by turning off the stylus layer.
Is it going to be merged again?
Click to expand...
Click to collapse
I thought I read somewhere that they won't be added in again. Kinda hope I'm wrong
Oh, & thanks big time sbrisson, cool beans!
Sent from my SPH-L900 using Xparent BlueTapatalk 2

I did a full wipe and flashed the first nightly and gapps. Everything went well until I rebooted. When I restarted my phone, it just hung at the Galaxy Note II screen. When I booted into TWRP, it asked me for a password and my data partition was encrypted.....
Edit: I did restore apps from rom toolbox pro. Maybe that caused the problem. I will try again. Full wipe and reinstall apps from play store.

DarkManX4lf said:
I did a full wipe and flashed the first nightly and gapps. Everything went well until I rebooted. When I restarted my phone, it just hung at the Galaxy Note II screen. When I booted into TWRP, it asked me for a password and my data partition was encrypted.....
Edit: I did restore apps from rom toolbox pro. Maybe that caused the problem. I will try again. Full wipe and reinstall apps from play store.
Click to expand...
Click to collapse
I am having the same issue where I get stuck on the splash screen upon reboot, with no adb access. I have eliminated the issue being caused from: my personal CM build, GApps package, and wiping vs not wiping. The only way I can get it to boot fully is to boot back into recovery (TWRP) and reflash. I'm at a loss...

Steady Hawkin said:
I am having the same issue where I get stuck on the splash screen upon reboot, with no adb access. I have eliminated the issue being caused from: my personal CM build, GApps package, and wiping vs not wiping. The only way I can get it to boot fully is to boot back into recovery (TWRP) and reflash. I'm at a loss...
Click to expand...
Click to collapse
Guys, I've flashed this rom 3 times today while comparing it to ParanoidAndroid's release and I haven't run into this issue. Did you guys do a factory reset AFTER installing the rom and gapps? I noticed this was an extra step that I did not have to perform while on 4.2.2. So basically, I had to wipe data twice before I rebooted to actually start the rom, once before I installed the rom and once again after I installed gapps; before I rebooted.
Good Luck!!

[email protected] said:
Guys, I've flashed this rom 3 times today while comparing it to ParanoidAndroid's release and I haven't run into this issue. Did you guys do a factory reset AFTER installing the rom and gapps? I noticed this was an extra step that I did not have to perform while on 4.2.2. So basically, I had to wipe data twice before I rebooted to actually start the rom, once before I installed the rom and once again after I installed gapps; before I rebooted.
Good Luck!!
Click to expand...
Click to collapse
I have also rebooted twice since flashing the rom this morning and had no difficulties either time, the only thing I can add is that I used the same process as MrMathis; I did a factory reset after flashing the rom and Gapps. Hope this helps.

Are you guys finding success with cwm or twrp? OP states use cwm however I have always used twrp. Just wondering if the issues are because of twrp recovery?
Sent from my SPH-L900 using Tapatalk 4

aggiedf said:
Are you guys finding success with cwm or twrp? OP states use cwm however I have always used twrp. Just wondering if the issues are because of twrp recovery?
Sent from my SPH-L900 using Tapatalk 4
Click to expand...
Click to collapse
Twrp works just fine
Sent from my SPH-L900 using xda premium

[OFFICIAL][4.3][TF300T] CyanogenMod 10.2 Nightlies

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
REQUIREMENTS
Click to expand...
Click to collapse
- TF300T (it can be installed on TF300TG but no 3G support!)
- Unlocked bootloader
- Your bootloader must be at least on Jelly Bean version (10.4 and above). - We recommend that you run the 4.2 Bootloader.
DOWNLOADS
Click to expand...
Click to collapse
Google Apps:
http://goo.im/gapps
Nightlies:
http://get.cm/?device=tf300t
HOW TO INSTALL
Click to expand...
Click to collapse
First installation :
1) Unlock your device, and install TWRP recovery (look in the development forum for the thread)
2) Push the update zip to your internal memory
3) Reboot in recovery (Shutdown tablet, press Vol Down + Power, then press Vol Up when prompted)
4) Make a backup
5) Navigate to "Install zip from sdcard", "Choose zip from sdcard", and choose the update zip you previously pushed to your tablet
5a) If you want Play Store, flash gapps now too (link above)
6) Go back and Wipe data/cache
7) Reboot
Updating from previous build:
1) Push update zip to /sdcard/
2) Reboot in recovery
3) Flash as above
4) Reboot
If any issue after updating, wipe data.
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#tf300t/cm10.1/next
SOURCES
Click to expand...
Click to collapse
http://github.com/cyanogenmod
http://github.com/cyanogenmod/android_kernel_asus_tf300t
http://github.com/cyanogenmod/android_device_asus_tf300t
DEVELOPERS
Click to expand...
Click to collapse
xplodwild, bumble-bee (for tf201 device tree from which this tree is inspired), chrmhoffmann, loganmc10, dasunsrule32 for some help, cyanogenmod
SUPPORT US
Click to expand...
Click to collapse
You can either help us by giving FULL bug reports WITH LOGS, WITH REPRO CASE, ETC, or by submitting patches.
If you're not a developer, but still want to support you can hit the "Donate to me" button up ahead. Chrmhoffmann, please remind me to give you some of it - Remember this is something we're doing in our free time, so a small gift is always appreciated and motivates us to keep on updating the port Thanks to all donators!

Woot thanks man, appeciate it!

Tears of Joy
Well almost anyways.

Anyone else getting FC every time the AOSP keyboard try's to popup ?
EDIT: reflashed without gapps and it's fine, but as soon as I flash gapps the FC come back on popup keyboard. Otherwise rom seems fast, everything else seems ok at first glance but I flashed back to a backup cause the ROM in unusable without the keyboard.

So we don't have to be on the 4.2 bootloader for this to work? 4.1 bootloader will be fine?

zaki0saad said:
So we don't have to be on the 4.2 bootloader for this to work? 4.1 bootloader will be fine?
Click to expand...
Click to collapse
The 4.2 Bootloader is preferred, but I have only tested it on the 4.2 bootloadee (my own build). Off course you can try if you are still on the 4.1 bootloader. If the ROM does not boot, then you will know
Sent from my Nexus 10 using Tapatalk 4

zurny said:
Anyone else getting FC every time the AOSP keyboard try's to popup ?
EDIT: reflashed without gapps and it's fine, but as soon as I flash gapps the FC come back on popup keyboard. Otherwise rom seems fast, everything else seems ok at first glance but I flashed back to a backup cause the ROM in unusable without the keyboard.
Click to expand...
Click to collapse
Did you build yourself? Because there is no nightly build yet to download.
If you downloaded the latest nightly from get.cm, and flashed the 4.3 gapps then it would be a bit logical that you get a fc because you flashed 4.3 gapps on a 4.2.2 build.
Sent from my Nexus 10 using Tapatalk 4

Great! Waiting patiently for the official thing

joelalmeidaptg said:
Great! Waiting patiently for the official thing
Click to expand...
Click to collapse
Yeah, that same feeling when he made a post for CM10.1 and wait for a while to get it haha.

scanno said:
Did you build yourself? Because there is no nightly build yet to download.
If you downloaded the latest nightly from get.cm, and flashed the 4.3 gapps then it would be a bit logical that you get a fc because you flashed 4.3 gapps on a 4.2.2 build.
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
Wow I feel an idiot, looks like I flashed 10.1, I looked at the release date but didn't check the filename, carry on, nothing to see here

glad for your repaired tf300

After I saw that you recommended CWM for this ROM, I downloaded and flashed it. It ****ed up my device, only allowing me into CWM, not even fastboot. That gives me ADB, but CWM wont mount anything, so I cant flash anything...PLEASE HELP ME!!!

I believe you need TWRP 2.5 instead
kriscodian said:
After I saw that you recommended CWM for this ROM, I downloaded and flashed it. It ****ed up my device, only allowing me into CWM, not even fastboot. That gives me ADB, but CWM wont mount anything, so I cant flash anything...PLEASE HELP ME!!!
Click to expand...
Click to collapse
The new bootloader requires TWRP 2.5 instead - I am a firm believer in CM recovery for all my recovery needs except this. Please correct me if I am wrong, but currently as far as I know, TWRP 2.5 is the only recovery that works with the new Android 4.2+ bootloader. Check the basic threads for the background.

kjwaugh said:
The new bootloader requires TWRP 2.5 instead - I am a firm believer in CM recovery for all my recovery needs except this. Please correct me if I am wrong, but currently as far as I know, TWRP 2.5 is the only recovery that works with the new Android 4.2+ bootloader. Check the basic threads for the background.
Click to expand...
Click to collapse
I was on TWRP 2.5.0.0, but in the instructions in this ROM it said CWM. Now I can't flash Recoverys or anything...
What can I do to fix it?

Try the CWM Recovery thread
kriscodian said:
I was on TWRP 2.5.0.0, but in the instructions in this ROM it said CWM. Now I can't flash Recoverys or anything...
What can I do to fix it?
Click to expand...
Click to collapse
You were already there - try the link below:
http://forum.xda-developers.com/showthread.php?t=1668173&page=46
It covers the basics and shows the "new" fastboot mode aswell as the current state of this "new" bootloader requiring TWRP 2.5

Can I update from 10.1? In my galaxy s the partition layout for 10.2 is different from the 10.1 cm so it required a full wipe.
Thanks
Sent from my TF300T using Tapatalk 2

kjwaugh said:
You were already there - try the link below:
http://forum.xda-developers.com/showthread.php?t=1668173&page=46
It covers the basics and shows the "new" fastboot mode aswell as the current state of this "new" bootloader requiring TWRP 2.5
Click to expand...
Click to collapse
But neither of the methods work as I am not allowed into Those choices... It goes straight into CWM, no fastboot

kriscodian said:
But neither of the methods work as I am not allowed into Those choices... It goes straight into CWM, no fastboot
Click to expand...
Click to collapse
Make sure you have adb drivers installed when you are in CWM (check in device manager on pc) and then try typing adb reboot bootloader in adb.

Already tried...

Start at the beginning then
kriscodian said:
Already tried...
Click to expand...
Click to collapse
Install Asus stock rom, then install recovery, root it, factory reset and then continue with usual rom-flashing instructions.

Kali Nethunter for d2spr

Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, catches fire, you get fired because the alarm failed, and global thermonuclear war
Kali Nethunter ported to the Samsung Galaxy S3​REQUIREMENTS:
A Samsung Galaxy S3 USA CURRENTLY RUNNING CM11 failure to have this will result in a brick and possibly even a HARD BRICK
A functioning brain
A working recovery
Basic instruction following skills
STEPS:
Download the two zips and copy them to your phone
Link for file 1: https://drive.google.com/open?id=0B5BIHhwzM7wWdDhnbW9xR0E3d2M
Line for file 2: https://drive.google.com/file/d/0B5BIHhwzM7wWSDA5MmZmMjN1TFE/view?usp=sharing
Reboot into recovery
Flash the zips in either order.
???
Profit.
Use make kali_defconfig to make the Kali Kernel correctly if compiling
Please post flash time and results below, this should work on ALL d2 devices under the d2lte label CM uses.
XDA:DevDB Information
Kali Nethunter for d2lte , ROM for the Sprint Samsung Galaxy S III
Contributors
dank101
Source Code: https://bitbucket.org/dank101/android_kernel_samsung_d2_kali
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CM11
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 0.1
Beta Release Date: 2015-06-09
Created 2015-06-10
Last Updated 2015-07-08

WooHoo!

hotwired34 said:
WooHoo!
Click to expand...
Click to collapse
FYI: I just updated the kernel zip to fix approximately everything.

I am trying to make a port for cm12.1 d2att could you upload the device scripts.

aron2hip said:
I am trying to make a port for cm12.1 d2att could you upload the device scripts.
Click to expand...
Click to collapse
Uhhh....
Not that easy...
Also ask on the d2att thread.

dank101 said:
Uhhh....
Not that easy...
Also ask on the d2att thread.
Click to expand...
Click to collapse
I have the kernel source in the devices directory, I'm just too lazy to edit the androidmenu bash script for the device. Unless there are further modifications necessary.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

aron2hip said:
I have the kernel source in the devices directory, I'm just too lazy to edit the androidmenu bash script for the device. Unless there are further modifications necessary.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
There are indeed future mods needed.

The first two Google Drive links are dead.
Here is a mirror for the files. I don't know how long they will last so urge OP for new mirror.
http://www.filedropper.com/kalilinuxnethunter121d2ltekitkat
946mb
http://www.filedropper.com/kalinhkernel
12.5mb

Knuxyl said:
The first two Google Drive links are dead.
Here is a mirror for the files. I don't know how long they will last so urge OP for new mirror.
http://www.filedropper.com/kalilinuxnethunter121d2ltekitkat
946mb
http://www.filedropper.com/kalinhkernel
12.5mb
Click to expand...
Click to collapse
You really should have PMed me about this FIRST.
I didn't know they died.

When will file links be available for download again cause? I was only ever able to download the kali kernel!

Flashed cm11 plus all zips , rom boots fine. Except for the part where the screen doesn't display anything (stays blank and off), however I can swipe to unlock and get the vibration as well as turn the volume up and down and get the sound that is associated. Any ideas I've done it twice with full wipes of everything I could wipe asside from the sd card

balves08 said:
Flashed cm11 plus all zips , rom boots fine. Except for the part where the screen doesn't display anything (stays blank and off), however I can swipe to unlock and get the vibration as well as turn the volume up and down and get the sound that is associated. Any ideas I've done it twice with full wipes of everything I could wipe asside from the sd card
Click to expand...
Click to collapse
You're doing it wrong.
You don't wipe anything.

dank101 said:
You're doing it wrong.
You don't wipe anything.
Click to expand...
Click to collapse
Im not wiping between installing cm11 and the two zips, that's stupidity. I was doing a full wipe before reflashing cm11 and the 2 zips again. Just no display

balves08 said:
Im not wiping between installing cm11 and the two zips, that's stupidity. I was doing a full wipe before reflashing cm11 and the 2 zips again. Just no display
Click to expand...
Click to collapse
I don't understand how that could be happening....
It's working on my S3 fine. And the nethunter zips are just a kernel and a zip that runs a bunch of scripts and extracts a CHROOT.

dank101 said:
I don't understand how that could be happening....
It's working on my S3 fine. And the nethunter zips are just a kernel and a zip that runs a bunch of scripts and extracts a CHROOT.
Click to expand...
Click to collapse
Do you think that it would have anything to do with what version of cm11 that is being used, I r what baseband? (I'm noob ish when it comes to that) cuz cm11 works fine then I flash everything and it shows the Droid logo or w/e and then goes blank with the soft keys illuminating, as well as responding to touch (side note I had forgotten to authenticate the adb connection prior so I could easily reboot to recovery and was able to bring up and select ok to allow it w/o the screen being visible, so it must be something driver related to the display)

balves08 said:
Do you think that it would have anything to do with what version of cm11 that is being used, I r what baseband? (I'm noob ish when it comes to that) cuz cm11 works fine then I flash everything and it shows the Droid logo or w/e and then goes blank with the soft keys illuminating, as well as responding to touch (side note I had forgotten to authenticate the adb connection prior so I could easily reboot to recovery and was able to bring up and select ok to allow it w/o the screen being visible, so it must be something driver related to the display)
Click to expand...
Click to collapse
Try flashing CM11 without flashing nethunter, if the display is working, then I dunno what to say.

dank101 said:
Try flashing CM11 without flashing nethunter, if the display is working, then I dunno what to say.
Click to expand...
Click to collapse
Done that 3 times cm11 works fine, display goes to **** after flashing nethunter. What version of cm11 are you using by the way

Clean flash over 04/26 nightly took about 20 mins. No issues so far I got some more playing around to do before a final verdict. Thanks I'll have some fun with this.

balves08 said:
Done that 3 times cm11 works fine, display goes to **** after flashing nethunter. What version of cm11 are you using by the way
Click to expand...
Click to collapse
Personally I used the d2lte latest nightly.

What good is this to the S3? I wasn't aware that this phone can go into monitor mode at all.

[NOVUS][ROM][D2SPR|6.0.1|UNOFFICIAL]CyanogenMod 13

CyanogenMod is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system.
Code:
/* Your warranty is now void.
/* I am not responsible for bricked devices, dead SD cards,
/* or you getting fired because the alarm app failed.
/* If you have any concerns about features
/* included in this ROM, ask before flashing it!
Information
I present you with Android 6.0.1/CM13 for the Sprint Galaxy SIII. This is a WIP, I try to work on it when ever I get a bit of free time.
I will try to post a new weekly build once a week or sooner.
The newest build will be at the top of the downloads list.
Prior to Installation
1) I recommend using and/or upgrading to TWRP 3.0.0 (Install version via 2.8.4 zip, then flash 3.0.0 img to upgrade)
2) Make a complete full backup! I cannot stress this enough! Boot, System, Data, Cache, everything. If for some reason this build doesn't work out for you, no biggie go restore.
3) You must be on the NDC modem or it may not detect your sim.
4) Full wipe of the system is required (Dalvik/ART Cache, System, Data, Internal Storage, Cache). CM13 is based off android 6.0.1 and is a completely new version requiring a complete new install.
5) Download and have ready in the device's sim card Gapps Version "Arm, 6.0, Pico". (Other variants may work, I have not tested them all)
6) Download and have ready in the device's sim card the new d2spr CM13 Rom (download below).
Installation
After wipe is fully properly completed...
Reboot in to recovery and go to "Install".
Search for the new Rom where you stored it in the sim and select, DO NOT "Swipe to confirm Flash" at this time, we have to install Gapps first.
BEFORE you swipe, select "Add more Zips" and search for your GappsVersion "Arm, 6.0, Pico" and select.
If you flash the Gapps after the CM install, you will have an error loop so flash during initial install is a necessity.
Now proceed to "Swipe to confirm Flash" and Reboot.
First boot takes some time, but shouldn't take more then 10-15 mins total and progess shouldn't be stalled at any point past 5 mins.
Downloads
cm-13.0-20160322-UNOFFICIAL-d2spr.zip
cm-13.0-20160322-UNOFFICIAL-d2spr.zip.md5sum
cm-13.0-20160311-UNOFFICIAL-d2spr.zip
cm-13.0-20160311-UNOFFICIAL-d2spr.zip.md5sum
cm-13.0-20160305-UNOFFICIAL-d2spr.zip
cm-13.0-20160305-UNOFFICIAL-d2spr.zip.md5sum
Version Information
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.x
Status: Beta
ROM Firmware Required: NDC
Android Security Patch Level : March 1, 2016
XDA:DevDB Information
CM13 d2spr, ROM for the Sprint Samsung Galaxy SIII
Contributors
Novus (aka ThomasJoseph315)
lj50036
Source Code: https://github.com/CyanogenMod
Build Notes
I've noticed that the APN settings are hard to modify. This may change at a later date, but for now it is what it is. If you use an MVNO like do, you will need to flash the APN settings during the rom flash process just like Gapps. I personally have boost mobile and Moped_Ryder has made a very well Boost Mobile zip, though I had to modify slightly with the settings to get LTE working consistently. If you need a zip for your carrier, download the Boost Mobile Zip Ver-2.2 and use notepad++ to edit it to suit your needs.
Possible bug with Gapps. On my first boot, I installed Gapps Mini and was getting download errors from the play market. I re-flashed with Pico, seems to be working.

Very cool to see an unofficial build. Thank you very much. Support for this phone is much appreciated.

Nice work

New build up.

how will i get the NDC modem please?
how can i get the NDC modem or how can i install it?

So installing this ROM, I discovered that the galaxy s3 I have is not 16 gb is 12gb I wiped everything and still is 12 gb, is this normal for this phone SPH-L710?

how you update PRL and profile i can't find it in settings

soulz said:
how you update PRL and profile i can't find it in settings
Click to expand...
Click to collapse
AFAIK u need to flash back to stock TouchWiz to update PRL .... At least that's the only way I was able to get it done recently. (Although there used to be other alternatives I believe)

Palladium OS Unofficial Oneplus 5 and 5T (Vanilla and GAPPS)

include <std_disclaimer.h>
/*
* Your warranty is... still valid/probably? ( Subject to OEM's)
*
*We are not responsible for bricked devices, dead SD cards
* unpleasant experiences. Custom ROM's are Custom for a reason and
* as developers, we try our best to give you the most complete experience
* When you choose our ROM, its a choice which you make but it doesnt make us
* liable to any unfortunate events. But we will be happy to help for the greater good.
/
Palladium OS is not yet another ubiquitous os but a trendsetter of its own level. The Prime focus here
are on speed, stability and above all, its a community driven os where everyone can experience their ideas
without any limitations. All these is complemented by the Meteor Fall programme which are a series of OTA updates
which adds in new features and suggestions. So, now you know why its christened The Palladium OS.
Source
Palladium: PalladiumOS
Install Instructions
Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM
- Flash Gapps Zip file (Only for Vanilla variant)
- Reboot your device.
Downloads
ROM: sourceforge
GApps: NikGapps
Credits
- Google for AOSP
- LineageOS
- Project Fluid
- ShapeShift OS
- Pixel experience
- Project Streak
- Dot OS
- Octavi OS
- Bliss ROM
- AICP & POSP & Pixys Team for thread template idea
- Also many pro devlopers who all help us to bring this rom to you..
- Please let us know if we forgot to mention your name in credits..
AND TO THE PALLADIUM TEAM FOR THIS ROM​
Build Author/Maintainer - Arokz Dpk
Device Name - Oneplus 5 and 5T
Device Codename -dumpling and cheeseburger
Kernel Source - https://github.com/ArokzDP/kernel_oneplus_msm8998
ROM Status - Unofficial
Android Version - 11.0
ROM Version - v1.3

thanksssssss

Wow! Thank you, is it my birthday? I will flash over the next couple of days. Thank you once again.

I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.

Drhedphuk said:
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Click to expand...
Click to collapse
Am on the same gapps version and it booted jus fine for me. If the zip is corrupted u wont be getting successful flash message. Maybe try again afterwards when free. Also happy that u tried it.

Arokia said:
Am on the same gapps version and it booted jus fine for me. If the zip is corrupted u wont be getting successful flash message. Maybe try again afterwards when free. Also happy that u tried it.
Click to expand...
Click to collapse
I also guess the boot loop could be due to encrypted or decrypted thing. Try with f2fs instead...

Arokia said:
I also guess the boot loop could be due to encrypted or decrypted thing. Try with f2fs instead...
Click to expand...
Click to collapse
Okay, thank you for the advice. I will let you know.

Added to the OnePlus 5 Index Thread here.

Drhedphuk said:
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Click to expand...
Click to collapse
Happened to me as well but i got it fixed by flashing the vanilla rom first and then let it boot, after that i rebooted back to the recovery and flashed gapps. Worked just fine. Hope this will help anyone having a similar issue

Any way to get rid of the home buttons and have a home bar instead ? Couldn't find any option like Derpfest has. Props for the great rom, I'm loving it and the battery life is just incredible.

Jalef said:
Happened to me as well but i got it fixed by flashing the vanilla rom first and then let it boot, after that i rebooted back to the recovery and flashed gapps. Worked just fine. Hope this will help anyone having a similar issue
Click to expand...
Click to collapse
Thank you very much. Which gapps package did you flash?

No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.

Drhedphuk said:
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Click to expand...
Click to collapse
Make sure you have the zip files anywhere in your internal storage. But not inside a folder within the internal storage. Because whenever you wipe data,system,cache and dalvik it will also wipe the downloaded files inside the download folder.

Jalef said:
Make sure you have the zip files anywhere in your internal storage. But not inside a folder within the internal storage. Because whenever you wipe data,system,cache and dalvik it will also wipe the downloaded files inside the download folder.
Click to expand...
Click to collapse
I kept them in the same place that I kept Pixel ROM and was able to flash that afterwards. Plus the APK's that I had within that folder and the Majisk zip were fine too. Weird issue.

Drhedphuk said:
I kept them in the same place that I kept Pixel ROM and was able to flash that afterwards. Plus the APK's that I had within that folder and the Majisk zip were fine too. Weird issue.
Click to expand...
Click to collapse
That's actually weird because when i flashed on my end everything got deleted from there

Drhedphuk said:
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Click to expand...
Click to collapse
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package.

KeinePanik said:
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package
Click to expand...
Click to collapse
KeinePanik said:
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package.
Click to expand...
Click to collapse
I was wondering whether my codeworx Twrp was maybe outdated. Can I flash Orange fox over the top of codeworx with a zip file?
Edit: Flashed Orange Fox, I'll try again.

Yesss!! Flashed it! It was obviously the recovery version that I was running. On the suggestion of @KeinePanik I flashed Orange Fox recovery and voila! (Thank you my friend)
My apologies to the developer and everyone else for flooding this thread with my issues.
I have been running the app for about 5 hours now and can report that it is really smooth, great battery life and some nice UI extras. Many thanks to the dev, will it go official?

Current release has june sec. patch or shall I wait for the upcoming update if it around the corner ???

m.omdaa said:
Current release has june sec. patch or shall I wait for the upcoming update if it around the corner ???
Click to expand...
Click to collapse
Security patch is May 5.