Related
temasek's UNOFFICIAL CM12.1 BUILDS
UNOFFICIAL ROM MAINTAINER THREAD
I did not create this rom 'm just sharing all the credits are the moonlight.
The lastest version TWRP (2.8.7.0) or PhilZ Touch recovery is recommended.
Installation:
Clean Installation
1. Download the ROM.
2. Download the GApps.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.
Dirty Flash/Update
1. Download the ROM.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
Downloads:
Removed after the investigations! Thanks @krasCGQ
GApps
Credits:
@moonlight
@arter97
@temasek
@treborbr
Contributors:
moonlight
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 12.1
Version Information
Status: UNOFFICIAL
Created 2015-09-26
Last Updated 2015-09-11
Reserved!
Reseverd!
One more!
First again......
Love CM..
Other ROMs should go to hell
Screen shot please...
Sorry I'm testing another rom now and I can not send prints . But you can see some in the post of the art s3: http://forum.xda-developers.com/gal...-temasek-s-unofficial-cyanogenmod-12-t3086689
Wow... temasek rom is here for s4 also.... i was using this in my s3....
Tq @treborbr for the rom....
Sent from my GT-I9500
thx for new rom for our device
Thanks for this new rom. I have a question. Does this rom have the same camera problem of the cm12.1 roms? If there is, it will be critical for me to use it.
The problem concerns ? I had no problem with me and it's based on cm with the latest changes .
The problem concerns camera. When i open it first no problem. Once you try again you face a strange problem. The camera doesnt shoot or open till you restart. This is a usual issue of CMs. But in some roms i didnt see this problem. If this rom doesnt have this issue i can try it.
Screenshots please!
I tried this rom. I havent seen any bugs yet. But sometimes last apps are laggy. When you download a file the browser give fc and closes itself theb the download begins. Thats all. Thanks to the developers...
I would like to send some screenshots of the rom?
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Links
2: 20180118: remove Magisk, back su: https://drive.google.com/file/d/11V0Hmu9Jjib-oLERLXPNXbMMAie_iORq/view?usp=sharing
1: 20171231: https://drive.google.com/file/d/1m7t_7gntp9cDRRxGnJJqnwufnJxFVKUZ/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 7.1
Recovery
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Sources
Sources: https://github.com/ResurrectionRemix/
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Thanks again a lot for your work.
I wish you a happy new year!
@Valera1978
What such amazing gift for New Year!!!
Thanks for such awesome work my friend!
What is the different from this FW in compare to
https://forum.xda-developers.com/ga...-cyanogenmod-14-0-android-7-0-nougat-t3476335
? Does this thread continous the "old" one or it is a total other FW (other feature, Kernel .... ) ?
Mad07 said:
What is the different from this FW in compare to
https://forum.xda-developers.com/ga...-cyanogenmod-14-0-android-7-0-nougat-t3476335
? Does this thread continous the "old" one or it is a total other FW (other feature, Kernel .... ) ?
Click to expand...
Click to collapse
Hardware and config the same.
The idea is create another thread for custom firmwares, based on lineage\aosp.
Right now it's RR only, i'm working on OMNI rom, and later i'll build more firmwares.
please in other version don't insert the magisk.the rom to go in loop .and add in developer option the root gestion
Dagoncore93 said:
please in other version don't insert the magisk.the rom to go in loop .and add in developer option the root gestion
Click to expand...
Click to collapse
I'm taking a stab at what you are trying to express but the roms take 10 to 15 minutes to boot the first time because you are doing a full wipe. If you are not giving it at least that long magisk is not a likely cause.
Loakidog said:
I'm taking a stab at what you are trying to express but the roms take 10 to 15 minutes to boot the first time because you are doing a full wipe. If you are not giving it at least that long magisk is not a likely cause.
Click to expand...
Click to collapse
I received myself the error system ui crashed, and it got stuck on it.
Thanks Valera 1978, what a great new year gift!
I'm actually running Android 5.0.2, so is that Lollipop
Sent from my SM-G935F using XDA-Developers Legacy app
Albinoni said:
I'm actually running Android 5.0.2, so is that Lollipop
Click to expand...
Click to collapse
Yes
ralph_kl said:
I received myself the error system ui crashed, and it got stuck on it.
Click to expand...
Click to collapse
Send Valera1978 a bug report via Private Message. It is the only way developers can isolate the problem and fix it. In most Roms you can take a bug report via developer options.
help please Valera1978
i am updating from Resurrection Remix 5.8.5 version 20171231.
i wiped cache partitions
flashing rom 20180118 stuck on patching system unconditionally
theogalaxy said:
help please Valera1978
i am updating from Resurrection Remix 5.8.5 version 20171231.
i wiped cache partitions
flashing rom 20180118 stuck on patching system unconditionally
Click to expand...
Click to collapse
Try a full wipe magisk was removed with the latest version and super su added
A little help, please
Hello,
Sorry, but I need an help for understand.
How I can install this system?
I mean, can you explain to me what steps I need to do to install and which files to download?
sorry for my english, which is why I did not understand how to do it
Rosario
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Links
2: 20180118: remove Magisk, back su: https://drive.google.com/file/d/11V0Hmu9Jjib-oLERLXPNXbMMAie_iORq/view?usp=sharing
1: 20171231: https://drive.google.com/file/d/1m7t_7gntp9cDRRxGnJJqnwufnJxFVKUZ/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 7.1
Recovery
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Sources
Sources: https://github.com/ResurrectionRemix/
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Click to expand...
Click to collapse
Compability
It is can flash for SM-P091 ?
i want the S Pen features and UI of Galaxy Tab S3 on my Galaxy Note 12.1 Pro Wifi. Am I right here and if yes how to do it please?
In terms of the little RAM I have I will use on microSD card as a RAM alternativ. is this a good idea in combination with a custom Rom?
Thx!
LePro 3 : How to install GSI Roms, and where to find them
The point of this discussion is to alleviate the confusion of installing and configuring GSI Roms.
Although many of us would prefer to use fully native Android Pie Roms that are specifically designed for our phones, we do not yet have Official Pie Rom options, and there isn't alot of Beta options to choose from. Consequently, we get bored easily and are always searching something new.
Thankfully, GSI provides a wide range of alternative options and there's nothing wrong with experimentation and quelling our curiosities. In the end, lets just make sure that we continue to support our XDA Le Pro 3 developers, and if you can afford to do something nice for them...Please do so!
This thread is a work in progress and and intended to be a group effort, your participation is very welcome and highly appreciated
The OP will change often to add further information, or to correct inaccuracies, dead links, etc. So remember to check the OP occasionally, for updated information and links for useful add-ons or fixes.
The goal is that participants/you; share experiences, reviews, and suggestions.
In example, which GSI Roms you've tried, what was the experience like, was it worth it the time, did you use add-ons, etc.
If your installation required plugins, add-ons, fixes and what specifically did you use, PLEASE provide the link...etc.
Please don't say that you used a zip file to fix something and then not mention the name of that item.
Again, this a teamwork thread, be descriptive, it helps us understand what works and what doesn't. Be kind, share, discuss, and answer questions with patience and humility. If this is all new to you, feel feel to ask for help. [/I]
For now, I am providing the steps that I personally took to install and try several GSI Roms, See the steps below to get started and try this new GSI option for yourself.
Step 1 - Gather all needed Files
Latest Twrp : https://twrp.me/leeco/leecolepro3.html
Base Rom Currently base rom options are : Lineage 15.1 Treble, AICP 13.1 and Bootleggers ( Trebled Version)
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Gapps 9.0 : https://opengapps.org/ (I personally use Nano, or Pico > Best to choose something small )
Lineage 15.1 Treble Build : https://forum.xda-developers.com/le-pro3/development/rom-lineageos-15-0-leeco-le-pro3-t3683720
Lineage Boot: https://mega.nz/#!uuoBiaDK!_6JlNChLg...7ZKRzCcwNI3_p0 (Can also be extracted from 15.1 or any trebled rom)
AICP 13.1 Treble version: https://forum.xda-developers.com/le-pro3/development/rom-aicp-13-0-pro3-aka-zl1-x727-x720-t3698058
Bootleggers https://forum.xda-developers.com/le-pro3/development/bootleggers-rom-x727-x720-t3838454
Preferred GSI Rom: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
BlackScreen Kernel for Oreo Base : https://androidfilehost.com/?fid=11410932744536996059
BlackScreen Kernels for Pie Base Rom : https://androidfilehost.com/?w=files&flid=285063
___________________________________________________________________________________________
Step 2 - Installation Part 1 - Automated Vendor Option - See Bottom of OP for more Manual vendor flash method
Longterm and recommended - Quick Recovery Method
******Boot to Recovery> Flash Preferred Base Rom > Flash Gapps, Flash Magisk******
1. Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
2. Reboot Recovery
3. Flash Trebled Lineage or Trebled AICP ( from Links above)
4. Reboot Recovery - Flash Rom a second time.
5. Flash Gapps 8.1
6. Flash Magisk 17.1
7. Reboot to recovery, reboot to OS > Must do Basic Setup.
8. After setup - Reboot to Recovery Create full backup> Check Everything.
9. Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have a full Backup of a your trebelized installation, you are now ready to install GSI Rom.
Some GSI Roms have Gapps included while others do not.
If you chosen GSI rom ( seems ideal) that does not have Gapps, you will need to flash Gapps 9.0
Step 3 - Installation Part 2
GSI Installation Steps
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
___________________________________________________________________________________________________________________
ADDONS and ISSUE FIXES ( Only if needed- some GSI's will not have these issues)
Safety Net Fix: https://forum.xda-developers.com/oneplus-5t/how-to/guid-bypassing-safetynet-august-t3837809
Adaptive Brightness Fix : [url]https://forum.xda-developers.com/attachment.php?attachmentid=4581000&d=1535255905
NFC Fix https://mega.nz/#F!kgdGiI6L Key: !_Gr9otePqXOX7yVLtjUxfQ ( Thanks to @ enigmatic92 and @ ademir.dias for providing a working accessible link)
Option 2 NFC Fix : Pie-NFCFix-Universal_v1.zip
Substratum Dark Mode : The Fix is simple join Substratum Beta then use a compatible Pie them
See more information here: https://forum.xda-developers.com/showpost.php?p=77651573&postcount=36
Disable Rounded Corners: https://goo.gl/CcEMzi ( Substratum add-on)
Substratum Beta through Google https://play.google.com/apps/testing/projekt.substratum
Android P dark themes : Pi Dark [substratum]
Here is a free dark overlay to get you started Pie compatible, Open Source, Signed-off-by: Harsh Shandilya
OverLay : https://mega.nz/#F!kAw1WK6I Key: !wtX2GAY2676wjGFiwNwpVg
___________________________________________________________________________________________________________________
Installation Option 2 -
Quicker install Method - You can choose to have no backup at all or save a partial recovery ( System,Root) which is very helpful to have available, if you break your installation
Step 1 - Installation Part 1
Gather your Preferred Base Rom , Gapps, Magisk
Boot to Recovery
Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
Reboot Recovery
Flash Trebled Lineage or Trebled AICP ( see Links above)
Reboot Recovery - Flash Rom a second time.
No Gapps needed ( save alot of time by skipping setup)
Flash Magisk 17.1
Reboot to Recovery Create full backup> Check Everything.
( Note that you are not booting to system, this method install base and provides a recovery, to will help save time when starting over or returning to a standard Rom.)
Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have your gappless backup of a your trebelized installation, you are now ready to install GSI Rom.
Some roms have Gapps included while others do not.
If you chosen GSI rom that does not have Gapps, you will need to flash Gapps 9.0
Step 2 - Installation Part 2
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
The steps listed above assumes that you know the fundamentals of fastboot, using TWRP recovery, etc.
Using GSI’s roms is essentially testing GSI roms, there is no guarantee, although quite a few run extremely well on many devices.
The instructions above are just guidelines, of course as per XDA policy, anything that you choose to flash is done at your own risk
Generic System Image (GSI) list
LePro 3 use type A
Here's a collection of available GSI ROMs, in order to keep it easy to choose what you want.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Treble-Enabled Device Development
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Project Treble
https://forum.xda-developers.com/project-treble
With any GSI Rom, if it doesn't list our phone specifically ( Zl1 or Zl0) then you use the versions Label type A or : arm64 A only
I am personally using Havoc: https://sourceforge.net/projects/hav...0.zip/download
Installing updates - Steps Needed
The Base Rom method is easier a superior to using Trembled TWRP ( for me the using regular Twrp and Base cause the system to have better stability.
To update GSI Rom
You do not need to wipe any vendor partitions.
Place the update in your downloads folder, and unpack it.
Boot to recovery,
Clear simple cache,
Flash GSI rom to system,
Clear caches
Reboot to system > finished.
If you have a bootloop [email protected] reflash lineage boot.
Troubleshooting Tips
Trouble booting/stuck in bootloop ? : Resolution here: https://forum.xda-developers.com/showpost.php?p=77668925&postcount=71
UPDATE - September 20- 2018 - Manual Vendor Method - Using Codeworks New Treble TWRP
Download : twrp-3.2.3-0-20180919-codeworkx-zl1
Install Trebled TWRP
Choose Longterm or Quick method from Above, (regarding creating a backup)
After you have your Recovery, placed unpacked GSI Rom and vendor files on your Storage Drive,
Flash GSI to System
Flash 3 Vendor files
Flash Gapps if needed
Flash Magisk 17.1
Reboot to Recovery, clear cache
Reboot to system
If you have a good suggestion, I will add it to the OP and in will give your full deserved credit
Thanks to following members for their feedback and offer to help keep this thread accurate by providing reviews and their support @rob_z11, @Ramg77, @enigmatic92, @willngg @ademir.dias @4K2K
@*.*.*.* Please do not copy this OP into another thread without providing credit a link to this OP.
So far we we know that the following Roms work on the Leeco pro 3
Benzo, version 9/1
Havoc, most recent version. : Gapps is installed separately - I have experienced no issues at all with this rom. Currently using BlackScreen 5.3. r3
AOSP Extended 9.0 v6' Per @willngg : https://forum.xda-developers.com/showpost.php?p=77652380&postcount=37
If I left anyone out of this post let me know.
If anyone tries a GSI Rom not listed above, and it boot and runs, with success, please let me know so I can update this comment.
Today I installed the latest build of [9.0] [GSI] Pixel Experience P - UNOFFICIAL.
Very good and stable rom, with the same issues of the other GSI (Nfc, mobile network setup, stock camera)
It brings less personalization than Benzo but does not have as many problems with the Gapps that it comes pre-installed.
It's PR2 and it brings September security patch.
I'm noticing that all the GSIs that I've tried so far have a sharpness and screen definition that I did not see in Oreo, it's what I think.
Link: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Ramg77 said:
Today I installed the latest build of [9.0] [GSI] Pixel Experience P - UNOFFICIAL.
Very good and stable rom, with the same issues of the other GSI (Nfc, mobile network setup, stock camera)
It brings less personalization than Benzo but does not have as many problems with the Gapps that it comes pre-installed.
It's PR2 and it brings September security patch.
I'm noticing that all the GSIs that I've tried so far have a sharpness and screen definition that I did not see in Oreo, it's what I think.
Link: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
I fully agree!
tsongming said:
So far we we know that the following Roms work on the Leeco pro 3
Benzo, version 9/1
Havoc, most recent version. : Gapps is installed separately - I have experienced no issues at all with this rom. Currently using BlackScreen 5.3. r3
If I left anyone out of this post let me know.
Click to expand...
Click to collapse
First things first, excellent work with the guide step by step, very complete.
I add to the information that there is a new version of Benzo (0912) but it was very difficult to install because the Gapps that are preinstalled have a conflict with the Google Play Store, once all the steps are finished and before starting the first boot of the system , the protection of Google (factory reset protection or FRP) must be removed by means of a PC program, otherwise the initial setting will not go beyond "Searching for Updates". How I said the installation of this Rom is complicated.
Finally in XDA as in the Russian forum 4PDA I read that is about to come out a patch to run the NFC in the GSI Android Pie Roms, hopefully so.
Informative post! Aosip has been treblized too, have not tried it as a base however.
Ace42 said:
Informative post! Aosip has been treblized too, have not tried it as a base however.
Click to expand...
Click to collapse
Thanks,
I am using AICP as a base for Havoc with the boot.img from lineage and Blackscreen 5.3.r3 .
Its a flawless installation, Gapps is installation separately the gapps issue that some GSI Roms bring is avoided completely.
Sound quality, Call Quality, Battery life all excellent. Plus, I have installed all of my usual Magisk mods (alot!) without breaking the install.
Ramg77 said:
First things first, excellent work with the guide step by step, very complete.
I add to the information that there is a new version of Benzo (0912) but it was very difficult to install because the Gapps that are preinstalled have a conflict with the Google Play Store, once all the steps are finished and before starting the first boot of the system , the protection of Google (factory reset protection or FRP) must be removed by means of a PC program, otherwise the initial setting will not go beyond "Searching for Updates". How I said the installation of this Rom is complicated.
Finally in XDA as in the Russian forum 4PDA I read that is about to come out a patch to run the NFC in the GSI Android Pie Roms, hopefully so.
Click to expand...
Click to collapse
Yes, its the 0901 version that has no issues, right?
I only tried the 09/12 version, after seeing your post. and prior to that I was on two separate versions of miui GSI. and 2 versions of P beta
The Miui 10 Oreo version will be excellent once its display bugs are worked out.
tsongming said:
Yes, its the 0901 version that has no issues, right?
I only tried the 09/12 version, after seeing your post. and prior to that I was on two separate versions of miui GSI. and 2 versions of P beta
The Miui 10 Oreo version will be excellent once its display bugs are worked out.
Click to expand...
Click to collapse
That's right, the 0109 is the stable version of Benzo.
Against my principles I passed Antutu to the Pixel Experience 9 that I am testing and it gave me a very good score although I still seem that Android 9 offers the best user experience on this phone and Antutu does not reflect that.
Edit: The phone did not raise temperature while running the Antutu tests.
Incredible work @tsongming!! You are a fine machine....
tsongming said:
Thanks,
I am using AICP as a base for Havoc with the boot.img from lineage and Blackscreen 5.3.r3 .
Click to expand...
Click to collapse
Do you still need the lineageOS boot.img if you're using blackscreen?
Plan on flashing GSI soon. Really appreciate your instructions as they will help me and many others.
tsongming said:
LePro 3 : How to install GSI Roms, and where to find them
The point of this discussion is to alleviate the confusion of installing and configuring GSI Roms.
Although many of us would prefer to use a fully native Android P Rom that is specifically designed for our phones, we do not currently have alot of native options.. In consequence, we get bored easily and are often ready to try something new.
Thankfully, we have options, and there's nothing wrong with experimentation and quelling our curiosities. Lets just make sure that we continue to support our own Le Pro 3 developers, and if you can afford it, do something nice for them
This thread is a work in progress and a group effort, your participation is very welcome and highly appreciated
The OP will change to add or change to add further information or correct inaccuracies. So check the OP occasionally.
The goal here is that all participants/ you to share experiences, reviews, and suggestions. I.E : which GSI Roms have you tried , what was your experience, was it worth it, did you use addons, if so what, can you provide the link...etc. or add ons that they have tried. This should be fun!
For now, I am providing the steps that I personally took to install and try several GSI Roms, See the steps below to try it for yourself..
Step 1 - Gather all needed Files
Latest Twrp : https://twrp.me/leeco/leecolepro3.html
Base Rom Currently two options Lineage 15.1 Treble and AICP Treble version
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Gapps 9.0 : https://opengapps.org/ (I personally use Nano, choose something small )
Lineage 15.1 Treble Build : https://sourceforge.net/projects/lin...1.zip/download
Lineage Boot: https://forum.xda-developers.com/att...9&d=1536591029 Can be used with AICP as well.
AICP Treble version: https://forum.xda-developers.com/showpost.php?p=77596157&postcount=4898
Preferred GSI Rom: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
BlackScreen 5.3.r3 : https://forum.xda-developers.com/showpost.php?p=77596092&postcount=540
ISSUE Resolutions Files
Safety Net Fix: https://forum.xda-developers.com/oneplus-5t/how-to/guid-bypassing-safetynet-august-t3837809
Step 2 - Installation Part 1
Longterm ( recommended - Quick Recovery Method)
******Boot to Recovery> Flash Preferred Base Rom > Flash Gapps, Flash Magisk******
1. Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
2. Reboot Recovery
3. Flash Trebled Lineage or Trebled AICP ( from Links above)
4. Reboot Recovery - Flash Rom a second time.
5. Flash Gapps 8.0
6. Flash Magisk 17.1
7. Reboot to recovery, reboot to OS > Must do Basic Setup.
8. After setup - Reboot to Recovery Create full backup> Check Everything.
9. Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have a full Backup of a your trebelized installation, you are now ready to install GSI Rom.
Some GSI Roms have Gapps included while others do not.
If you chosen GSI rom ( seems ideal) that does not have Gapps, you will need to flash Gapps 9.0
Step 3
GSI Installation Steps
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
___________________________________________________________________________________________________________________
Option 2 - Step 1
Quicker install Method - You can choose to have no backup at all or save a partial recovery ( System,Root) which is very helpful to have available, if you break your installation
Step 1
Gather your Preferred Base Rom , Gapps, Magisk
Boot to Recovery
Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
Reboot Recovery
Flash Trebled Lineage or Trebled AICP ( see Links above)
Reboot Recovery - Flash Rom a second time.
No Gapps needed ( save alot of time by skipping setup)
Flash Magisk 17.1
Reboot to Recovery Create full backup> Check Everything. ( Note that you are not booting to system, this method install base and provides a recovery, to will help save time when starting over or returning to a standard Rom.)
Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have your gappless backup of a your trebelized installation, you are now ready to install GSI Rom.
Some roms have Gapps included while others do not.
If you chosen GSI rom that does not have Gapps, you will need to flash Gapps 9.0
Step 2
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
The steps listed above assumes that you know the fundamentals of fastboot, using TWRP recovery, etc.
Using GSI’s roms is essentially testing GSI roms, there is no guarantee, although quite a few run extremely well on many devices.
The instructions above are just guidelines, of course as per XDA policy, anything that you choose to flash is done at your own risk
Generic System Image (GSI) list
LePro 3 use type A GSI
Here's a collection of available GSI ROMs, in order to keep it easy to choose what you want.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Treble-Enabled Device Development
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Project Treble
https://forum.xda-developers.com/project-treble
Thanks to following members for their feedback and offer to help keep this thread accurate by providing reviews and their support
@rob_z11, @ Ramg77, @DrMyrkurs
Click to expand...
Click to collapse
Excellent job.
Thanks for your contribution and dedication for the our device.
Enviado de meu LEX720 usando o Tapatalk
Hi
Ramg77 said:
First things first, excellent work with the guide step by step, very complete.
I add to the information that there is a new version of Benzo (0912) but it was very difficult to install because the Gapps that are preinstalled have a conflict with the Google Play Store, once all the steps are finished and before starting the first boot of the system , the protection of Google (factory reset protection or FRP) must be removed by means of a PC program, otherwise the initial setting will not go beyond "Searching for Updates". How I said the installation of this Rom is complicated.
Finally in XDA as in the Russian forum 4PDA I read that is about to come out a patch to run the NFC in the GSI Android Pie Roms, hopefully so.
Click to expand...
Click to collapse
I've been running benzo without major problems for days.i updated to 9/12 with no problems.only new prob I found in the update is the mobile network is inaccessible from settings but 3rd party app can access it.no prob with gapps running.no play store issues either.great rom so far.cant wait to try havoc and a few others. Cool thread,thanks.
https://forum.xda-developers.com/le...ject-treble-lepro3-x72x-t3820844/post77636757
This is to fix adaptive brightness
Ascertion said:
Do you still need the lineageOS boot.img if you're using blackscreen?
Plan on flashing GSI soon. Really appreciate your instructions as they will help me and many others.
Click to expand...
Click to collapse
Probably not since Blackscreen overwrites the boot. When I first tried installing GSI's, I was only successful after using the Lineage boot, and the treble Black Screen had not been released yet.
rob_z11 said:
https://forum.xda-developers.com/le...ject-treble-lepro3-x72x-t3820844/post77636757
This is to fix adaptive brightness
Click to expand...
Click to collapse
Thanks, I added it to the OP
Good work with the guide mate
Thank you for this in-depth summary.
Here is my Antutu for the Havoc GSI
Sent from my LEX727 using XDA Labs
I flashed latest aex pie yesterday.just ran it for few hours.everything worked good and fast minus the usual nfc,and few settings arent complete but runs smooth and stable.moved back to latest benzo just cause it's more complete.but aex is still a great option.love options.lol
Here is Jaguar Pie. In addition to familiar Pie features (all of them), you have:
Official Telegram Link: https://t.me/jaguar_Rom_Official
The main thing: Non-treble! So, your vendor is located in system partition, which is NOT available to the entire world, like in treble roms.
1. Hardened/fortified bionic (over 150 commits) to prevent bad behavior by system and third party apps
2. Most runtime processes are read only, which means they can't be exploited to take over the device. I am trying to attack the cause, rather than the symptoms (a specific exploit)
3. Many kernel security features activated, such as 'configuration_integrity', randomization; hardened user copy, etc. Impulse governor added
4. Yama security in kernel
5. Working msm hotplug, which actually plugs/unplugs CPU based on load
6. Wakelock blocker, Alarm blocker etc
7. Gestures, Omni Theming
8. Smart pixels
9. Offline charging
10. Utouch
11. AOD
12. No response to 'type zero' SMS
13. Boot time on a fully settled rom is about 4-5 seconds after Zuk logo
14. Qualcomm's boost framework
Many more features, which I am tired to list.
This is beta, because I don't have the device - relied on @Dr.07 @The.Night.King and @benedict97 - thanks for testing
INSTRUCTIONS:
1. Format System/Vendor (if you have it)/Data/Dalvik/Cache. If you are encrypted in Oreo or encrypted with FBE, you also need a format with factory reset to get rid of encryption. ALSO: FORMAT FACTORY partition, otherwise, you will have 2 sets of vendor blobs, which would create a mess on boot
2. Flash the rom, flash Gapps, reboot and let the rom run, then
3. Back to TWRP to flash Magisk (18.1 is working)
Rom download V1: https://forum.xda-developers.com/devdb/project/dl/?id=31427
This is the initial release. All future updates will be in post #3, as usual.
Credit: MrHacker (I used his device tree as a base) and many others who work on device tree and kernel and obviously AOSP, OMNI, DU, CopperheadOS, Carbon Rom, Xtended and Benzo
Also, credit for a Jaguar bootanimation to @Ashish9 and @The.Night.King who made a logo and header icon
If anyone is interested in Afwall with administrative option restored (app can't be uninstalled, unless confirmed by you): https://forum.xda-developers.com/attachment.php?attachmentid=4739733&d=1554836212
XDA:DevDB Information
[ROM] JAGUAR PIE NON-TREBLE 3.18 KERNEL OFFICIAL, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
optimumpro
Source Code: https://github.com/optimumpr/kernel_zuk_msm8996
Sources for new (May 29) kernel: https://github.com/optimumpr/android_kernel_zuk_msm8996-1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
Based On: AOSP, DU, Lineage
Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2019-04-05
Created 2019-04-05
Last Updated 2019-08-07
Screenshots
Some screenshots:
Updates in this post
Those who are coming from treble roms: you need to format Factory partition too, otherwise, you will have 2 sets of vendor blobs, in other words, MESS
August 7. New release.
1. August security patches
2. Google r46
3. Camera should have level 3 now + more
Dirty flashing is fine, if on the previous release. Otherwise, clean flash - wipe Vendor/Factory/System/Data/Cache/Dalvik
Download rom V6: https://forum.xda-developers.com/devdb/project/dl/?id=31753
July 30: New release V5.2 with fixed installation problems:
You could try dirty flash, but I installed clean, then flashed Opengapps, and Firefox installed without any problems, while it didn't on V5.1.
Download rom V5.2: https://forum.xda-developers.com/devdb/project/dl/?id=31733
July 27. New release, v5.1.
This will fix encryption.
The reason it didn't work was the official TWRP. The maintainer (a known pro) put in the wrong size of userdata partition. So, if you ever formatted data on official TWRP, especially with factory reset, your data partition is screwed for the purposes of encryption (no place for crypto footer). I had to install another version of TWRP, and after I did format there, encryption worked. So, I am attaching both the rom and unofficial TWRP by handibuddy. This is also a signed version (as well as the rom itself), so you can re-lock bootloader on this rom: I have been doing this for ages and long before Lineage came up with the idea (you can check my signing guide in Oneplus 5 thread).
Download Rom V5.1: https://forum.xda-developers.com/devdb/project/dl/?id=31727
Download signed TWRP: https://forum.xda-developers.com/devdb/project/dl/?id=31728
Instructions: Rom could be flashed dirty over V5. TWRP could be flashed as image (to recovery) in your existing TWRP or via fastboot.
Just remember, if you want to relock bootloader, encrypt after locking.
July 25. New release, v5
1. July security patches
2. New Night Screen with configurable tint and brightness
3. Support for level 6-6.2 for AVC codecs
4. Option to disable proximity sensor during calls
5. In-CallUi is now themeable
6. Aggressive battery saving mode
7. Latest Lawnchair
Clean flash is required over V4 or if coming from a different rom, in which case you will also need to format vendor or factory partition.
DO NOT ENCRYPT YET!
Instructions:
1. Dirty flash, if already on Jaguar Pie
2. Clean flash, If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Download rom V5: https://forum.xda-developers.com/devdb/project/dl/?id=31725
________________________________________________________________________________________________________
June 6. New release, V4:
1. June security patches
2. Pie r41
Dirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
ps, reboot, then back to TWRP to flash Magisk
Download rom V4: https://forum.xda-developers.com/devdb/project/dl/?id=31621
______________________________________________________________________________________________________________________
June 2. Lawnchair update to the latest. Flash in TWRP.
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4770317&d=1559500522
May 31. Rom updated, V3:
1. Major kernel improvements - there is no reason to use my Oreo kernel or any other kernel
2. Flashlight works regardless of 'always on' or 'ambient display' (that required a clean flash)
Instructions:
1. Clean flash recommended - wipe system/data/cache/dalvik
2. If coming from a different rom, also format vendor/factory
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
Download rom V3: https://forum.xda-developers.com/devdb/project/dl/?id=31612
_____________________________________________________________________________________________________________________
May 30. This is an updated version of the new kernel I posted earlier. This one contains my commits + reversed 'power saving' commits. Sometimes, you get things better by reversing.
Unzip, put on internal SD and flash either with TWRP (as image onto boot partition) or via fastboot.
Download new kernel: https://forum.xda-developers.com/attachment.php?attachmentid=4768179&d=1559177914
May 28. Lawnchair update. Flash in recovery:
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4767269&d=1559060237
May 27. Updated release:
1. Fixed toggling flashlight in ambient display
2. Improvements in Qualcomm's boostframework
3. Contactsprovider updated (disappearing contacts)
Could be dirty flashed over V2. Otherwise, clean flash.
Download rom V2.1: https://forum.xda-developers.com/devdb/project/dl/?id=31602
May 25. New release, V2:
1. May security patches
2. Android Pie r37
3. Big changes in frameworks: exec spawning function is severely restricted to all apps, i.e., only one instance is allowed
4. Most resources preloading for exec spawning is disabled. As a result, boot time is shorter, fewer background resources are loaded in ram, which translates into an overall smoother experience.
5. Aggressive battery saving
6. Status bar burn protection
7. Media cover art filter (on lockscreen)
8. Switched to Bromite system webview V74
9. Redone auto-brightness and ambient display: ZukDoze removed, as Customdoze and Amibientdisplay are now builtin (Settings/Display)
10. Lawnchair upgraded: many fixes including Pie recents
11. MusicFX/Equalizer is now themeable
12. Zukparts removed, as spectrum profiles simply don't work, and KCAL could be done via Kernel Adiutor
13. Battery icon Q style
14. Wifi randomization working (Developer Settings)
15. Captive portal detection toggle (Settings/Wifi/Advanced - disable network connectivity check). You can now uninstall Captiveportal and have no 'x' in Wifi and Mobile icons
Instructions:
1. Clean flash required
2. Format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps or Nano Gaps, reboot. Then back to TWRP and flash Magisk
If your provider's APN is not on the list, set it up and enable. If data doesn't work, then change CDMA subscription in Mobile network to the alternative.
Download rom V2: https://forum.xda-developers.com/devdb/project/dl/?id=31591
__________________________________________________________________________________________________________________
April 9. New release. Lots of changes, mostly in kernel:
1. Inteli-thermal
2. Thermal-engine ported from Jaguar Oreo, so the rom runs about 3 degrees cooler
3. Substantially improved fluidity: according to testers, virtually no lag
Instructions:
1 If on a previous release, flash dirty and wipe dalvik/cache
2. if new, format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps, reboot. Then back to TWRP and flash Magisk
Download rom V1.1: https://forum.xda-developers.com/devdb/project/dl/?id=31467
_____________________________________________________________________________________________________________________
April 5. Here is the first update, kernel only. Speed improvement.
Just flash boot.img on top of the first release.
Download kernel: https://androidfilehost.com/?fid=1395089523397933955
Finally ?
@optimumpro Thank you. Respect?
Thanks for the work! ?
Woh!!!!...... Waiting for a detailed review by someone.....
Wow finally
vinay069 said:
Woh!!!!...... Waiting for a detailed review by someone.....
Click to expand...
Click to collapse
your prediction turned out pretty accurate about the release date lol
All right, boys and girls. First update: kernel only - speed improvement . Download (in post #3) and flash on top of the first release
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
GopalKaul said:
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
Click to expand...
Click to collapse
Screenshots posted. Stereo sound - not yet.
optimumpro said:
Screenshots posted. Stereo sound - not yet.
Click to expand...
Click to collapse
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Shubhi singhal said:
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Click to expand...
Click to collapse
Just flash rom
The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Kernel only.
venom0207 said:
Just flash rom
Click to expand...
Click to collapse
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
@optimumpro animations r fekked
Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
It is non treble, factory or vendor have nothing to do with it, you can straight away flash the rom
Flashed the ROM.
It took a lot of time to boot.
Swipe up home screen is not showing any options
Recents is not pie recents
Very fast ROM
In some themes, the notifications are invisible
Some days one user send me a PM with a link to sourceforge to download lineage18 for our device. I'm not the creator of the rom, just i want to share the link for those users that want to try it and use this new version of Android.
I tried it and so far I didn't find any bug, just battery drain is high in my opinion but I didn't flash the last release of November, I flashed an older one and all was smooth and nice.
* How to install:
- download the rom
- go to recovery ( i use orangefox 10 sar )
- wipe cache, dalvik cache, data, system
- flash the zip file ( gapps are included in rom )
- reboot and setup
- (optional) reboot again to recovery if you want to install magisk, flash it and reboot.
Download link: https://sourceforge.net/projects/ephedraceae/files/chiron/lineage-18.0/
Of course I'm not responsable if your device is damage or something else, i just share the link.