Help me. Soft keys and notification bar is gone. - Desire 820 Q&A, Help & Troubleshooting

I've rooted my htc desire 820u(Indian Dual sim) running on Lollipop 5.0
Then I found MIUI 7 ROM in XDA site. So I tried to flash it after wiping all the data-system-cache-internal storage and it didn't go well and ended up with boot failure. But before doing so, I backed up all the data using TWRP (Boot-System-Data). So when i tried to restore the data, the process is finished successfully.
But when the phone is rebooted I got several error messages like "system ui crashed", "htc dot view crash" "package installer help crash". And notification bar and soft toggle keys are gone. Nothing is accessible now. I tried recovering the same 3-4 times. But the same happened every time. What should I do now?
PLEASE HELP ME.

Try to flash the Ota again. And than restore your backup. You will find the Ota zip in the development section. Dont try to flash KK over Lollipop. You cant downgrade.
Or try a factory reset after restoring, maybe it helps.

Oel said:
Try to flash the Ota again. And than restore your backup. You will find the Ota zip in the development section. Dont try to flash KK over Lollipop. You cant downgrade.
Or try a factory reset after restoring, maybe it helps.
Click to expand...
Click to collapse
I tried Factory reset after restoring but didn't work. So can I flash ota zip in unlocked bootloader? how to flash it.
Thanks a lot

Oel said:
Try to flash the Ota again. And than restore your backup. You will find the Ota zip in the development section. Dont try to flash KK over Lollipop. You cant downgrade.
Or try a factory reset after restoring, maybe it helps.
Click to expand...
Click to collapse
Is it necessary to re lock the boot-loader before flashing ota zip file?

I have the same problem. When i try to flash the ota i get error 32 when bootloader is unlocked and then i tried locking the bootloader and doing the same and i get error 12 . Please help

Rahsam said:
I have the same problem. When i try to flash the ota i get error 32 when bootloader is unlocked and then i tried locking the bootloader and doing the same and i get error 12 . Please help
Click to expand...
Click to collapse
hi
Are you S-OFF ?
Are you sure about the ota is for your CID ?
Flashed it using RUU mode ( HTC Silver logo ) or just using fastboot only in bootloader ?

alikhoshi said:
hi
Are you S-OFF ?
Are you sure about the ota is for your CID ?
Flashed it using RUU mode ( HTC Silver logo ) or just using fastboot only in bootloader ?
Click to expand...
Click to collapse
Im sure tat the ota is for my CID and i did it with fastboot oem rebootRUU command and the silver logo appeared. But mine is s-on. How do i s-off??

Rahsam said:
Im sure tat the ota is for my CID and i did it with fastboot oem rebootRUU command and the silver logo appeared. But mine is s-on. How do i s-off??
Click to expand...
Click to collapse
I said S-OFF to do Super CID , if you sure about that no need to change your CID
Take a picture of Error

Rahsam said:
I have the same problem. When i try to flash the ota i get error 32 when bootloader is unlocked and then i tried locking the bootloader and doing the same and i get error 12 . Please help
Click to expand...
Click to collapse
Hey dont worry. If you are having locked bootloader, let it be.
Follow your original thread,
http://forum.xda-developers.com/desire-820/help/htc-820-toggle-buttons-notification-bar-t3239258
I hope this will work for you.

Related

[Q] [Help!] Bricked One X

I wanted to flash LeeDroid's rom. After I flashed the boot image I realized that I haven't put the rom into the root of the phone's storage! silly me. I tried rebooting the system but it won't boot. Then I tried the unbrick methods on the forum but found no luck. At last I tried relocking it and restore it using RUU but it still won't work! It is saying that I got the wrong version of RUU, but where can i find the RUU for 1.28? Hope someone can help!!
chowdyg said:
I wanted to flash LeeDroid's rom. After I flashed the boot image I realized that I haven't put the rom into the root of the phone's storage! silly me. I tried rebooting the system but it won't boot. Then I tried the unbrick methods on the forum but found no luck. At last I tried relocking it and restore it using RUU but it still won't work! It is saying that I got the wrong version of RUU, but where can i find the RUU for 1.28? Hope someone can help!!
Click to expand...
Click to collapse
What country are you in, which network are you on and did you buy your phone sim free?
If you go into fastboot mode and then boot into CWM using the command:
fastboot boot <CWM img file>.img
You'll then be able to use adb to push the rom zip onto your device which you can then flash with CWM.
If the RUU says you have the wrong version you probably have the RUU for another region/carrier.
It's pretty much impossible to permanently brick the one x (without s-off) so don't worry, you'll get it working eventually.
Thanks man. I am in Hong Kong and i am pretty sure it is sim free. after I tried running the RUU i have relocked the bootloader. for some reason I can't even get into recovery right now! When I try the RUU it saids the image version is 1.28.708.10 and I get error140
chowdyg said:
Thanks man. I am in Hong Kong and i am pretty sure it is sim free. after I tried running the RUU i have relocked the bootloader. for some reason I can't even get into recovery right now! When I try the RUU it saids the image version is 1.28.708.10 and I get error140
Click to expand...
Click to collapse
Which RUU did you download?
rogersnm said:
Which RUU did you download?
Click to expand...
Click to collapse
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.26.708.2
I guess it is not the right one is it
chowdyg said:
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.26.708.2
I guess it is not the right one is it
Click to expand...
Click to collapse
You can't install the 1.26 RUU after you've updated hboot with the 1.28 OTA.
Try installing this RUU: http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.103.14_release_257077_signed.exe, it's the same region but a newer version.
Flash the stock 1.28 recovery image and relock your bootloader before trying to install the RUU.
The 1.28 recovery image can be found here: http://hoxroms.serveftp.com/Asia_1.28_RUU/recovery_signed.img
rogersnm said:
You can't install the 1.26 RUU after you've updated hboot with the 1.28 OTA.
Try installing this RUU: http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.103.14_release_257077_signed.exe, it's the same region but a newer version.
Flash the stock 1.28 recovery image and relock your bootloader before trying to install the RUU.
The 1.28 recovery image can be found here: http://hoxroms.serveftp.com/Asia_1.28_RUU/recovery_signed.img
Click to expand...
Click to collapse
Thanks so much!!
but i have already relocked the bootloader without flashing the recovery image ... would that make a difference?
If the RUU runs successfully then don't worry about it, if it throws another error then flash the stock recovery and try again.
rogersnm said:
If the RUU runs successfully then don't worry about it, if it throws another error then flash the stock recovery and try again.
Click to expand...
Click to collapse
Thanks again. but how do i do it with the bootloader locked
chowdyg said:
Thanks again. but how do i do it with the bootloader locked
Click to expand...
Click to collapse
Just unlock it by running "fastboot flash unlocktoken Unlock_code.bin" like you did before and then relock it after
rogersnm said:
Just unlock it by running "fastboot flash unlocktoken Unlock_code.bin" like you did before and then relock it after
Click to expand...
Click to collapse
now it is saying error 170. whenever i try to flash something it just says waiting for device
chowdyg said:
now it is saying error 170. whenever i try to flash something it just says waiting for device
Click to expand...
Click to collapse
Disconnect and reconnect your phone, reboot your phone and your pc, try again.
ps. Make sure you relocked your bootloader
rogersnm said:
Disconnect and reconnect your phone, reboot your phone and your pc, try again.
ps. Make sure you relocked your bootloader
Click to expand...
Click to collapse
Thank you so much!! problem solved!!

How do I Update Rooted HTC ONE X ?

Hi guys,
I have a rooted one X and want to install he latest update. I tried to relock my bootloader by starting fastboot and then type:
" fastboot oem relock"
Now my phone should be relocked and it does show relocked in pink in the bootloader, but under that stands security warning I don't kno if thats normal or important or something. I rebooted my phone and downloaded the update but when i try to install it i still get into the bootloader.
What am I doing wrong and how do I unlock my bootloader again after the update?
Sascha
You unlock by flashing the unlock_code.bin file again like you first did.
To apply an ota update you also need to reflash the stock recovery
Sent from my HTC One X using xda app-developers app
Okay I unlocked my bootloader flashed my recovery.img and relocked my bootloader again. But still it reboots into the bootloader. Could it be my backup of the recovery.img is already wrong?? and if so where can i get the right one
My phone:
1.29.401.11
HTC__102
I Relocked the bootloader and got back to stock recovery.. But while updating i have an error.. Phone with red square on him..
Idk what i'm doing wrong. i have status relocked.. Maybe something wrong with stock recovery?
I tried the recovery image attached to this post first time it deleted al my data second time the update succeeded
Still can't update.. tried some other recoveries, but still get error while updating..
try to flash the stock boot.img first.
ckpv5 said:
try to flash the stock boot.img first.
Click to expand...
Click to collapse
can you give me the link pls?
http://forum.xda-developers.com/showthread.php?t=1692404
lirox said:
Still can't update.. tried some other recoveries, but still get error while updating..
Click to expand...
Click to collapse
same here
ckpv5 said:
http://forum.xda-developers.com/showthread.php?t=1692404
Click to expand...
Click to collapse
It returns me to bootloader))
You can try to following download stock recovery and download the RUU of your phone ( the same version as your latest official update ) then go to fastboot
Type
Fastboot flash recovery "your stock recovery " .img
Hit enter
Fastboot flash OEM lock
This might give an error but when you type it again it wil work
Now put your phone in fastboot again and then start your RUU from your pc if it gives an error just search for another One it will take about 10 min but after your phone will work fine
Hope it helps
Sent from my HTC One X using xda app-developers app

JB Installation Problems

Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
blankfile99 said:
Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
Click to expand...
Click to collapse
you installed an OTA?
I'm using a Stock from a recovery Nandroid, not mine but the same CID 044... I guess I shold go back to RUU...but I've tried without any success
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
blankfile99 said:
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
Click to expand...
Click to collapse
you are on JB now and you can't run ICS RUUs, you can't downgrade...
matt95 said:
you are on JB now and you can't run ICS RUUs, you can't downgrade...
Click to expand...
Click to collapse
I'm not...I'm on 2.17 yet...JB update does not install...that's the main problem
and I have noticed that NO MATTER I CHANGE...IT WONT CHANGE THIS VERSION... OMG
tks man!
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Sentinel196 said:
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Click to expand...
Click to collapse
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Also, this may sound silly but did you reflash stock RECOVERY?
blankfile99 said:
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Click to expand...
Click to collapse
No worries, let us know how you go, and don't forget the Thanks button.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Well I am currently running Team Venom's Viper but I have HBOOT 1.31. My device's CID is HTC_J15.
I have checked the list of RUUs but unfortunately all of them are older than the version I need, which has to be 3+.
Does anybody know if there's an RUU available for my device? It is an ubranded WWE version, 401 if I remember correctly.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
I'm using the same as the NANDROID, taken from it...right?
Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
That's all I need... I'll give my feedback later.
Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
In my experience the 2.17.707.xx RUU Asia WWE does not work properly. It does its thing installing everything, relocks the bootloader but somehow it does not reflash the recovery. After 4 hours trying everything under the sun, I gave up and looked for a nandroid of 2.17 for CID_044 and restored from that, reflashed stock recovery and went to town with the OTA.
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Refer custom to stock thread posted earlier. Go through step by step procedure. It will help u to be on stock Rom. After that flash any Rom suitable to your CID only
http://forum.xda-developers.com/showthread.php?t=1859714
Hit Thanks if u like.
Sent from my HTC One X using xda app-developers app
Got It guys!!
What I did... NOTHING else...
Only Reboot the phone...wait to initialize completely, then reboot again, when came a little update about 1.25mb...installed and reboot...after that...JB update installed correctly.
If someone else needs...Someone like me who relocked the phone waiting for JB and Has problems
1. Unlock Phone
2. fastboot flash recovery recovery.img (from nandroid 2.17)
3. fastboot flash boot boot.img (from nandroid 2.17)
4. fastboot erase cache
5. restart bootloader (I like to do this way)
6. Install RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed on windows
7. Wait to boot completely, then restart phone.
8. Update Software ...a little update came before JB. (about 1.25mb)
9 Reboot phone.
10. Update Software... finally to JB.
Thanks guys!
Sentinel196 said:
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Click to expand...
Click to collapse
The RUU ran with no problem, and it relocked my bootloader, but it still did not receive any OTAs. So I had no choice but to do a nandroid restore instead (recommended anyway )

[Q] can't install OTA on original ROM

dear all
i m trying to install an OTA updae for my original HTC M8 firmware, the OTA update i am trying to install since along time is ( 3.28.401.9 ) which is 73.96 MB, i have stock recovery, and when i donload the OTA update and try to install with stock recovery, it proceeds for almost 30% only and i see the green arrown, then it turns red and i cant proceed installation, i am doing this so i can get the lolipop update later.
know that my phone is rooted and boot loader is opened.
Tell me exactly what the state of your device is when you look at your bootloader.
osamaxosama said:
dear all
i m trying to install an OTA updae for my original HTC M8 firmware, the OTA update i am trying to install since along time is ( 3.28.401.9 ) which is 73.96 MB, i have stock recovery, and when i donload the OTA update and try to install with stock recovery, it proceeds for almost 30% only and i see the green arrown, then it turns red and i cant proceed installation, i am doing this so i can get the lolipop update later.
know that my phone is rooted and boot loader is opened.
Click to expand...
Click to collapse
I too had this issue, for me it was as simple as restoring a stock Nandroid backup I found on here, as my backup wouldn't work.
http://forum.xda-developers.com/showthread.php?t=2701376
Also, I know it's obvious, but make sure your bootloader is re-locked!
here is attachments for what happened
osamaxosama said:
here is attachments for what happened
Click to expand...
Click to collapse
That last photo shows you have modified your system partition. You won't be able to take the OTA with /system modified. Are you using Xposed? If you are, you need to open Xposed and uninstall any modules you have, then uninstall Xposed itself.
andregardner said:
Also, I know it's obvious, but make sure your bootloader is re-locked!
Click to expand...
Click to collapse
And this is obviously a wrong advise.
There is no need to relock bootloader for OTA.
Relocked bootloader is needed only for installing RUU and manual firmware flashing on S-On device.
I see your device is S-Off, you can try to install a RUU, keep in mind that your RUU must match your CID, but you can change your CID always if you want. I have superCID so I can install every RUU file.
thanks guys
i haven't installed exposed, but i think i installed sun plus o turn S-ON to S-OFF
i wish i could install original OTA.
i already relocked my bootloader.
so the only option for me is to install via RUU, is there anyway or a chance to use OTA udates and remove modified system ?
Back up your phone storage and data partition then flash this:
http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
ashyx said:
Back up your phone storage and data partition then flash this:
http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
Click to expand...
Click to collapse
thanks for the link
but i found many links like OTA update, and official update and many
is there any difference ?
do u recommend any of these ?
thank you..
i already downloaded the OTA one.
How did you manage to flash the ota when your system is modified?
ashyx said:
How did you manage to flash the ota when your system is modified?
Click to expand...
Click to collapse
i dont know, you tell me.
i just did as you guys told me.
i got some snapshots for the process, thank you all, it worked like a charm !!!
i just downloaded the OTA from the attached link, renamed it to 0P6BIMG.zip and moved the file to the root of my SD Card, and wen to the bootloader, and it started automatically to install, it took 10 mins. :good::good::good:
thank you guys for helping me out.
i just got one question, do i have to root my device agaiin ? do i have to make nandroid back for the recovery.img ???
thank you.
what could we do without you XDA developers !!!
osamaxosama said:
i dont know, you tell me.
i just did as you guys told me.
i got some snapshots for the process, thank you all, it worked like a charm !!!
i just downloaded the OTA from the attached link, renamed it to 0P6BIMG.zip and moved the file to the root of my SD Card, and wen to the bootloader, and it started automatically to install, it took 10 mins. :good::good::good:
thank you guys for helping me out.
i just got one question, do i have to root my device agaiin ? do i have to make nandroid back for the recovery.img ???
thank you.
what could we do without you XDA developers !!!
Click to expand...
Click to collapse
attachments
Let's not confuse the ota with a full ruu. So my question is :
1: did you flash the ruu (full rom update utility)
2: flashed the ota (smaller size file, pure update to the existing software)
?
I had the same problem as the OP..So i tried to restore just the system from my back up using CWM..Now im stuck at the HTC logo screen after the reboot. Im not sure what to do.
That wasn't the ota you just flashed. That was an RUU which completely wipes everything. I hope you realise it's also wiped your internal memory too?
ashyx said:
That wasn't the ota you just flashed. That was an RUU which completely wipes everything. I hope you realise it's also wiped your internal memory too?
Click to expand...
Click to collapse
I couldnt flash the OTA...I got the red exclamation. So I tried to restore the system (using advanced restore)because I had put up the adblock. After which I was stuck in the loading screen.
Anyway I did a complete restore and flashed the stock recovery. Now its updating from the Eye Update.
Thanks for the quick reply though!
. .
Why are you relocking bootloader while you're S-OFF?
Relocking bootloader for flashing RUU is needed only on S-ON devices.
Wysłane z mojego HTC One_M8

[Q] Can't install Lollipop update..

Guys, I got the new update, but I can't install it. It gives me red icon during installation. I have installed the stock recovery, but still can't install the update... Can someone help me? My device is rooted and the last time I got an update, I installed stock recovery and installed the update successfully, but now I can't install lollipop update, although I have done the same, can someone help me?
KabbozZ said:
Guys, I got the new update, but I can't install it. It gives me red icon during installation. I have installed the stock recovery, but still can't install the update... Can someone help me? My device is rooted and the last time I got an update, I installed stock recovery and installed the update successfully, but now I can't install lollipop update, although I have done the same, can someone help me?
Click to expand...
Click to collapse
this problem happen to no-root, no unlocked bootloader user too
i don't know why?
Seriously, none got a solution for this problem?
Relock the bootloader, unroot.
Might have to RUU.
FoxyDrew said:
Relock the bootloader, unroot.
Might have to RUU.
Click to expand...
Click to collapse
Don't even how to unroot. Whenever I hit "full unroot", it deletes super SU from my device and asks for a reboot, but when I reboot it, it gets back again..
And I don't even have a nanodroid backup..
FoxyDrew said:
Relock the bootloader, unroot.
Might have to RUU.
Click to expand...
Click to collapse
Yeah i went back to stock unrooted and flashed the stock recovery from your ruu post and then relocked the bootloader but whenever i try to install the update, it doesnt boot into the recovery. It goes straight to the bootloader i think im going to run the ruu zip you provided and then try again.
Sent from my 710C using XDA Free mobile app
Flashing the ruu allowed me to install the update with no problems.
Sent from my 710C using XDA Free mobile app
The_Greatest_Juan said:
Flashing the ruu allowed me to install the update with no problems.
Sent from my 710C using XDA Free mobile app
Click to expand...
Click to collapse
a5ul asia x.xx.707.x has no ruu :crying::crying:
bigbear1308 said:
a5ul asia x.xx.707.x has no ruu :crying::crying:
Click to expand...
Click to collapse
this one should work http://forum.xda-developers.com/desire-816/general/rom-backup-htc-desire-816-single-sim-4g-t2890824
Can someone tell me what to do? What does RUU mean? and how could I know to which region my device belong? like Europe, Arabic etc...
and how could I flash this RUU?
I know how to lock bootloader though..
terrybear2k said:
this one should work http://forum.xda-developers.com/desire-816/general/rom-backup-htc-desire-816-single-sim-4g-t2890824
Click to expand...
Click to collapse
i can't use this
this edited platform.xml so install update abort when around 10-15%
Yeah, same thing is happening to me. My bootloader is unlocked, and the phone is unrooted. I'll download the update, but whenever I hit install, it'll go to the install page, and the green bar starts loading, then it goes to the pre-recovery screen thing with the red triangle with the exclamation point. So I've tried two things. Number one is pressing and holding the volume up and tapping the power button, which gets me to the stock recovery screen. It says that the update was aborted. So I go and restart the device. This seems to have deleted the update, so I have to download it all over again. I do that, then install. Again, I get to the triangle ! screen, so instead, I press and hold both the power button and volume up (which is basically the equivalent of a battery-pull. I get the same result. The update has to download again. What do I do? I was contemplating locking the bootloader and even factory reseting the device. I've kind of been waiting for this update since 5.0 was released period, so I would like some guidance as to what to do next. Oh, and just for helps-sake, I'm using a mac, not a pc. I don't own a pc, only an iMac, and this MacBook Pro.
Anyone know what's going one? Please do help
Thanks!
Noah
KabbozZ said:
Can someone tell me what to do? What does RUU mean? and how could I know to which region my device belong? like Europe, Arabic etc...
and how could I flash this RUU?
I know how to lock bootloader though..
Click to expand...
Click to collapse
After flashing stock recovery and relocking bootloader you need to flash RUU with your CID number.To find out your CID number install CID Getter from Play Store.After you find out your CID number you need to download RUU.And that is hard part of problem... I didn't find my RUU anywhere on web,but you maybe will have better luck.
When you have your RUU just rename file in OP9CIMG.zip and put it in to your sd card.After booting into bootloader phone will search for OP9CIMG.zip file and if CID number is same on phone that file will be flashed.
Aimbot91 said:
After flashing stock recovery and relocking bootloader you need to flash RUU with your CID number.To find out your CID number install CID Getter from Play Store.After you find out your CID number you need to download RUU.And that is hard part of problem... I didn't find my RUU anywhere on web,but you maybe will have better luck.
When you have your RUU just rename file in OP9CIMG.zip and put it in to your sd card.After booting into bootloader phone will search for OP9CIMG.zip file and if CID number is same on phone that file will be flashed.
Click to expand...
Click to collapse
k, my CID is HTC J_15.. How could I find my RUU now?
My VMUSA 816 is still upgrading, but it looks like the solution for some people will be running the last version of ruu???.exe from HTC for your particular version of the 816 before downloading and installing the OTA update for Lollipop. Before running the ruu???.exe file the OTA would just reboot into the bootloader. Note that you should run ruu even if you already have that rom version installed. I already was running 1.50.652.3 but the OTA just wouldn't work. So the ruu just reflashed a clean version of the same rom.
As others have done I unrooted, installed stock recovery and then relocked bootloader before running ruu???.exe and installing OTA update for Lollipop.
The reason flashing a stock recovery would work before is because when doing a smaller update that stayed within kitkat it didn't do an entire system check, when upgrading to lollipop it checks EVERYTHING so the only way it'll install is having a nice fresh stock ROM from an RUU with a locked bootloader and stock recovery.
If s-offed is it necessary to relock bootloader?
KabbozZ said:
k, my CID is HTC J_15.. How could I find my RUU now?
Click to expand...
Click to collapse
Search on web you maybe get lucky...
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
marcukial said:
If s-offed is it necessary to relock bootloader?
Click to expand...
Click to collapse
No its not necessary...
Aimbot91 said:
Search on web you maybe get lucky......
Click to expand...
Click to collapse
Don't even know how to search for it. Still don't know what to type on google, so i could get results.. Could you help me more? I know I have asked much..
KabbozZ said:
Don't even know how to search for it. Still don't know what to type on google, so i could get results.. Could you help me more? I know I have asked much..
Click to expand...
Click to collapse
Did you check the HTC site yet? Look for ROM updates there first. I assume they have country specific sites that will list ROMs for your region. For me in they show all their ROMs for US carriers.

Categories

Resources