Related
Hi everyone,
tried to make my old gio usable ...
It was rootet long time ago with cwm.
I want to install CM11, so first I updated like described to tass 6.0.4.5 via zip from sdcard, because my cwm (3.x) was old.
But after (automatically done) rebbot the gio system (2.3.6 stock rom) works, but CWM dosn't. Pressing the 3-Button or 2-Button method a log appears and stands for hours while pressing keys. After releasing keys system is booting the 2.3.6.
So I tried to recover with odin - if pressing the 3-button to apply download mode the screen becomes yellow word "downloading" at black background - but with 2 PCs (driver installed with kies at one, with driver pack at the second) don't find the phone, only an unknown usb device *without* usb id.
I need some suggestions how to recover the device.
Thanks
dischneider
no problem!
dischneider said:
Hi everyone,
tried to make my old gio usable ...
It was rootet long time ago with cwm.
I want to install CM11, so first I updated like described to tass 6.0.4.5 via zip from sdcard, because my cwm (3.x) was old.
But after (automatically done) rebbot the gio system (2.3.6 stock rom) works, but CWM dosn't. Pressing the 3-Button or 2-Button method a log appears and stands for hours while pressing keys. After releasing keys system is booting the 2.3.6.
So I tried to recover with odin - if pressing the 3-button to apply download mode the screen becomes yellow word "downloading" at black background - but with 2 PCs (driver installed with kies at one, with driver pack at the second) don't find the phone, only an unknown usb device *without* usb id.
I need some suggestions how to recover the device.
Thanks
dischneider
Click to expand...
Click to collapse
get rid of all this kies stuff and install these drivers:
http://forum.xda-developers.com/showthread.php?t=961956
make sure that it is a windows 7 PC.
Thanks for your assistance.
No, that dos not work.
The device isn't identified.
I have tried with USB-Tools: "USB\VID_0000&PID_0000". That cannot work.
But in normally operational mode or in "ARM9 debug mode" (VOLUP+HOME+POWER) it is identified well.
I have tried different devices, these will be identified in download mode to.
So I need another way to recover the device. CWM isn't working too.
Dirk
Update: I found an old pc with a 32bit vista - there it worked!
Like described in the update to my last post I will confirm, that everything works fine now.
I resettet to CWM 5.0.xx, updated to 6.0.4.7_GIO (this one works, the 6.0.4.5 I tried again, seems to be broken!).
After booting CWM 6.0.4.7 I installed CM11 RC5 (stable build) from sd and rebooted the device.
First boot was up to 20 minutes, but now everything works!
Now I have to search for the gapps package ...
Thanks a lot for your help!
Dirk
dischneider said:
Like described in the update to my last post I will confirm, that everything works fine now.
I resettet to CWM 5.0.xx, updated to 6.0.4.7_GIO (this one works, the 6.0.4.5 I tried again, seems to be broken!).
After booting CWM 6.0.4.7 I installed CM11 RC5 (stable build) from sd and rebooted the device.
First boot was up to 20 minutes, but now everything works!
Now I have to search for the gapps package ...
Thanks a lot for your help!
Dirk
Click to expand...
Click to collapse
why dont you use the stable 6.0.4.8 see http://forum.xda-developers.com/showthread.php?t=2691050
devrieshh said:
why dont you use the stable 6.0.4.8 see http://forum.xda-developers.com/showthread.php?t=2691050
Click to expand...
Click to collapse
Because of not easy to find the right version.
I am not patching my phone every day.
I know the technics, because I'm a professional it specialist.
But it isn't easy to find the right versions.
I did find 6.0.4.7 and not 6.0.4.8 *advanced*
What do advanced mean? Is it working for my phone? Do I need an advanced version?
6.0.4.7 I found in a linked thread from -> this CM11 article. There was said I need 6.0.4.6 or above, the linked thread was 6.0.4.5! So I scrolled thru 50 pages of thread to find the latest - it was 6.0.4.7.
I did find two gapps packages too, no one is working for me ...
One seems to be working, but after ending the initial screen of the assistent (after language selection) nothing appears and nothing works, no menu ... nothing. Is it the right version? How to know? Where to find another? Working with the CM11 I installed?
It's not easy. Or maybe only I am a stupid dummy.
But the help in this support is great!
Everyone gives useful answers, thats nice.
Dirk
dischneider said:
Because of not easy to find the right version.
I am not patching my phone every day.
I know the technics, because I'm a professional it specialist.
But it isn't easy to find the right versions.
I did find 6.0.4.7 and not 6.0.4.8 *advanced*
What do advanced mean? Is it working for my phone? Do I need an advanced version?
6.0.4.7 I found in a linked thread from -> this CM11 article. There was said I need 6.0.4.6 or above, the linked thread was 6.0.4.5! So I scrolled thru 50 pages of thread to find the latest - it was 6.0.4.7.
I did find two gapps packages too, no one is working for me ...
One seems to be working, but after ending the initial screen of the assistent (after language selection) nothing appears and nothing works, no menu ... nothing. Is it the right version? How to know? Where to find another? Working with the CM11 I installed?
It's not easy. Or maybe only I am a stupid dummy.
But the help in this support is great!
Everyone gives useful answers, thats nice.
Dirk
Click to expand...
Click to collapse
you have to download recovery.img put it on your sdcard then do the commands on your terminal as exampled in the 6.0.4.8 article.
you can also flash the aromafm_gio.zip (advanged filemanager)
the article http://forum.xda-developers.com/show....php?t=2691050
reason to use the 6.0.4.8 is that it is much more compleet than 6.0.4.7 and older ones (you can do everything that the older ones also the 5.0.2.8 etc and more)
you have to use the ............ 14.02.08-Gapps_YWOR-KK-GIO-4.4.2.zip .....
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
cameron72 said:
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
Click to expand...
Click to collapse
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
bob23bk said:
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
Click to expand...
Click to collapse
I had already tried the method and file in the forum you linked me to. It failed almost instantly. That's when I turned everything off and tossed it all to the back seat of my work truck before it got thrown at the windshield. I keep seeing people saying they have trwp or whatever. I don't even know what that is haven't researched that. Is it something i need as well?
I've never successfully rooted a Samsung device. I used to do this stuff a lot back with the droid x with Linux and everything was pretty simple. Does Samsung change their bootloader with each update like Motorola did then? I was wondering that when trying to install a firmware of a previous version that maybe that was the problem.
All I wanted root for was to just tweak some things and be happy. It has turned into a nightmare.
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
moonbutt74 said:
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
Click to expand...
Click to collapse
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
cameron72 said:
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
Click to expand...
Click to collapse
okay, hmm, when you say it fails, do you mean odin fails to flash and if so what is the reason/ouput ?
or do you mean that you are now in a recovery bootloop ?
note- though i go the full route of packing recovery.img's for odin flashing, the md5 checksum always seems to
come up as invalid, the working "remedy" is to remove the .md5 extension from the "odin-flashable-recovery".tar.md5 file
by renaming the file to "odin-flashable-recovery".tar
odin will no longer attempt the checksum verification but the recovery file will flash.
make sure you have samsung-usb-drivers for windows installed. on the main page of my devhost archive [link is in my signature]
you will find the tools you need. the possible problem is that the ota you installed may have overwritten your bootloader, for that i don't
have a reliable fix, so if anything make sure you also have the stock recovery ready to go as well as supersu update zip
already downloaded onto your device for rooting.
after you flash the custom recovery [with auto-restart in odin disabled] run the flash and wait for the res-ok message, give it another second or two then disconnect the tab and force reboot to recovery, home,vol-up and power, once in recovery make a full backup, then flash supersu zip and reboot, if you do go into recovery loop, force reboot to odin mode, home,vol-down and power, follow the on screen instruction, now reconnect your tab to pc and use odin to flash back stock recovery.
m
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
moonbutt74 said:
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
Click to expand...
Click to collapse
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
cameron72 said:
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
Click to expand...
Click to collapse
for root look up supersu update zip
ask Restl3ss :silly:
m
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Glad it worked out, recovering from brick does set you free from the stress induced by the disclaimers imo :silly:
Looking for any information and help on rooting this device. Thanks in advance.
jslow3 said:
Looking for any information and help on rooting this device. Thanks in advance.
Click to expand...
Click to collapse
I managed to root this device today using king root. The first try failed. I ran it a second time and got it to work. I installed titanium backup which gave a warning that the superuser binary was functional but may cause problems. I installed supersu from the play store and tried to update the binary, which failed, even after a restart. Not sure what that means, perhaps someone more knowledgeable can tell me. I also installed other root apps, SD maid pro and rom toolbox pro, both of which seem to function as they should. I have yet to confirm root with a root checker but I intend to shortly. Hopefully this information will help with further development of this device.
The above listed method works. I did it this morning by fluke. I just tried it thinking it wouldn't work but it did. I have lollipop v 5.0.2 and the kingrooy file I downloaded was from google searching "king root" without apk. Half way down you should see the 4.6 link.
Current version is 4.6x which works on most newer mid grade phones. Then I used kingroot to SuperSU files and setup which I got from Google. Can't remember link but search kingroot to supersu and it should be the first link. Run and reboot enter supersu and update binary. You ready to install root apps, debloat, and customize. Haven't found any customs kernel, ROMs, recovery, or anything so I will be working on that soon. Keep an eye out in the near future. Unregistered user until I finish posting.
sosthenisRR
King root
King root version 4.5.0 works for Alcatel one touch conquest thank you very much. Titanium backup doesn't like the manager and anticipates problems and recommends superSU. I was unable to install the binary normally but haven't tried using the cwm or twerp option. Busybox 26 installed and I'm new to xda and will continue on the subject.
sosthenisRR said:
The above listed method works. I did it this morning by fluke. I just tried it thinking it wouldn't work but it did. I have lollipop v 5.0.2 and the kingrooy file I downloaded was from google searching "king root" without apk. Half way down you should see the 4.6 link.
Current version is 4.6x which works on most newer mid grade phones. Then I used kingroot to SuperSU files and setup which I got from Google. Can't remember link but search kingroot to supersu and it should be the first link. Run and reboot enter supersu and update binary. You ready to install root apps, debloat, and customize. Haven't found any customs kernel, ROMs, recovery, or anything so I will be working on that soon. Keep an eye out in the near future. Unregistered user until I finish posting.
Click to expand...
Click to collapse
Success! thank You
Yep, that method works great. I was looking for a.method to.root this device. The only difference was I used this link to switch from KingRoot to SuperSU
androidmtk.com/replace-kinguser-with-supersu
Thanks for the OP
Does anyone have a link to the stock firmware and or the version of Ono Touch Upgrade for this device?
Need stock rom!!
bmk072 said:
Does anyone have a link to the stock firmware and or the version of Ono Touch Upgrade for this device?
Click to expand...
Click to collapse
my device is bricked! i have the alcatel onetouch conquest 7046t for boost mobile....i read this thread and decided to do exactly what everyone who posted on the thread said to do...i i got kingroot version 4.6, and it worked on the second try....but no root apps would work... netspoof said that i might have not given it superuser permissions ( which i did...when kingroot asked i clicked allow) and titanium backup pro said it failed to get root and that it recommends supersu....i installed superuser from chains sd and tried to update the binaries, but it failed......i notcied that in superuser it said that i had root and it said something about kinguser in superuser...so it bacame clear to me that i need to switch kinguser with superuser...or supersu like titanium backup and this thread suggested
so i followed the directions and found kingroot to supersu on google and let the app "supersu me" do its thing...
while supersume was uninstalling kingroot, and installing supersu....something popped up and asked me if i wanted to delete all the files associated with kingroot...i clicked yes....and thats what i think caused my phone to brick
when it said supersu was successfully installed, i went to the app and successfully updated the binaries...right....well it told me that i should reboot the phone because i just updated the binaries so i clicked the reboot now button that the app offered me and the phone went to reboot....but stayed at the alcatel onetouch screen and all i can access is the recovery mode....in recovery logs it says something about no such file or directory for dev/tty0 or soemthing. it said it again in something about the bootloader....
so i think what happened is when i told supersu me to delete all files associated with kingroot it went ahead and deleted a bootloader file or something....normally i would just reinstall the stock rom but this damn phone is so new there isnt one online anywhere
so anyways....can anyone tell me where to get the stock rom or how to unbrick my phone.....i want to just put the stockrom on an sd card and apply it as an update to restore whatever file that is missing and keeping it from booting up....i was thinking (since i happen to have a duplicate phone) that i could make a backup of the same exact phone in twrp and put it on the sd card, switch it to the bricked phone...recovery mode...apply update from phone storage...and bam...that shoulod work! right?
the only thing is....can you put twrp on this phone yet? there is really no development on it at all
so here are the questions i need answered
does anyone have a stock rom of this phone they could put in this thread?
can i get the stock rom straight from alcatel?
has anyone got twrp or cwm recovery onto this phone
i have never bricked a phone and not been able to fix it...i refuse this to be the one
mistaweeks said:
my device is bricked! i have the alcatel onetouch conquest 7046t for boost mobile....i read this thread and decided to do exactly what everyone who posted on the thread said to do...i i got kingroot version 4.6, and it worked on the second try....but no root apps would work... netspoof said that i might have not given it superuser permissions ( which i did...when kingroot asked i clicked allow) and titanium backup pro said it failed to get root and that it recommends supersu....i installed superuser from chains sd and tried to update the binaries, but it failed......i notcied that in superuser it said that i had root and it said something about kinguser in superuser...so it bacame clear to me that i need to switch kinguser with superuser...or supersu like titanium backup and this thread suggested
so i followed the directions and found kingroot to supersu on google and let the app "supersu me" do its thing...
while supersume was uninstalling kingroot, and installing supersu....something popped up and asked me if i wanted to delete all the files associated with kingroot...i clicked yes....and thats what i think caused my phone to brick
when it said supersu was successfully installed, i went to the app and successfully updated the binaries...right....well it told me that i should reboot the phone because i just updated the binaries so i clicked the reboot now button that the app offered me and the phone went to reboot....but stayed at the alcatel onetouch screen and all i can access is the recovery mode....in recovery logs it says something about no such file or directory for dev/tty0 or soemthing. it said it again in something about the bootloader....
so i think what happened is when i told supersu me to delete all files associated with kingroot it went ahead and deleted a bootloader file or something....normally i would just reinstall the stock rom but this damn phone is so new there isnt one online anywhere
so anyways....can anyone tell me where to get the stock rom or how to unbrick my phone.....i want to just put the stockrom on an sd card and apply it as an update to restore whatever file that is missing and keeping it from booting up....i was thinking (since i happen to have a duplicate phone) that i could make a backup of the same exact phone in twrp and put it on the sd card, switch it to the bricked phone...recovery mode...apply update from phone storage...and bam...that shoulod work! right?
the only thing is....can you put twrp on this phone yet? there is really no development on it at all
so here are the questions i need answered
does anyone have a stock rom of this phone they could put in this thread?
can i get the stock rom straight from alcatel?
has anyone got twrp or cwm recovery onto this phone
i have never bricked a phone and not been able to fix it...i refuse this to be the one
Click to expand...
Click to collapse
same thing here, except I can't boot into recovery or download. fflashcustom custom twrp from the aforementioned. still won't boot into recovery, hangs at the alacatel logo. what I did was hold down volume and power til it reboots 3&4 times, than it seems to boot back to a android. I even tried the factory restore and it wouldn't do that either. *shrug* imma hafta do more research and find out wtf. but ya, that should fix your sh*t. also. and haven't found the boost stock rom yet either. it's a custom rom, it's not actually lollipop.
Alcatel Onetouch Conquest 7046t rooting, etc.
jslow3 said:
Looking for any information and help on rooting this device. Thanks in advance.
Click to expand...
Click to collapse
I couldn't find the Alcatel Onetouch Conquest 7046t listed in the list of devices on this site at all, other than in a few posts. Maybe people don't think it's a worthy device to work on? Anyway, enough of that rant, what I would like to contribute here is that I tried using kingroot for my old Motorola xt912 which I had install Dirty Unicorns KitKat ROM on successfully, but lost root on. First it said it couldn't root it, then, after trying again, said it could. I started receiving alerts from Avast staying it has detected viruses, and it seemed to install it's own version of super user, when I already had the one by chain installed.. Which struck me as suspect activity and rose yet more red flags.
I also find it suspect that the users posting here on this thread seem to only be newbies.
Any thoughts or feedback is greatly appreciated. Thanks for reading.
P.S. .. And yes, I am interested in rooting this phone, debloating it, installing custom rooms, etc.
mistaweeks said:
my device is bricked! i have the alcatel onetouch conquest 7046t for boost mobile....i read this thread and decided to do exactly what everyone who posted on the thread said to do...i i got kingroot version 4.6, and it worked on the second try....but no root apps would work...
does anyone have a stock rom of this phone they could put in this thread?
can i get the stock rom straight from alcatel?
has anyone got twrp or cwm recovery onto this phone
i have never bricked a phone and not been able to fix it...i refuse this to be the one
Click to expand...
Click to collapse
Rusty, it's possible that the reason your phone bricked is that it was not fully/properly rooted in the first place. So when SuperSu tried to Un-kingroot it, something went terribly wrong. By the way, had you remembered to turn Developer Options on and set USB Debugging on before running the KingRoot app?
Anyway, there are a couple of options to easily unbrick since you have an identical device.
Note that you can't unbrick by installing TWRP or CWM on your working device, then flashing the bricked device, UNLESS you already have the same custom recovery installed on the bricked device and can boot into that recovery. These recoveries do not provide their backups as a flashable zip, nor are they compatible with each other, which is why you need the identical custom recovery on the bricked phone.
Here is how you can unbrick your device. Go to Alcatel's website and download and install their Mobile Upgrade S software - you will find the link in the support tab for most of their models (or use Google to find it). This is the official Alcatel tool that you would use to flash their stock ROMs onto your bricked phone.
That's the easy method. But if you want a learning adventure, let's pull out your working device. Lol. Go ahead and root it with the King Root app. You may have to try several times to get it fully and properly rooted. Make sure you run a root checker app to confirm that it's rooted. Do not use the SuperSu Me utility yet.
Once you've confirmed it's rooted, install busybox. I prefer the Busy Box X app from Rob Nedi over Stericson's.
Ok, so now we want to install the MTK Droid Tools on your computer. On your phone, make sure USB Debugging is still on. Now connect your phone to the computer and let the drivers for the phone automatically install. Once the drivers are installed, run MTK Droid. It should automatically detect your phone. Next select the Blocks Map button. Then save the scatter.txt file it gives you. Make a folder somewhere because you're going to next use SP Flash Tool to backup the ROM from your phone.
Use Google and XDA to learn how to use MTK Droid and SPF. Here's a helpful link:
http://freaktab.com/forum/mtk-based-devices/mtk-phones/13919-some-useful-tools-for-mtk-phones
Once you've installed SPF on your computer and created the ROM_0 readback of your ROM, go back to MTK Droid Tools and let it break the ROM_0 down into all the partitions that are contained in the ROM. You do this on the root.backup.recovery tab of MTK Droid. Select the "To Process File ROM From Flash Tool". Note that during this process, the Tool will give you the option to create the ClowWorkMod recovery for your phone!
Once the ROM partition files are created by MTK Droid, place them in that folder you created. At this point, you can use SPF to flash the stock ROM to your bricked phone. This will unbrick your phone.
(There's an even simpler way to unbrick your phone with SPF. Instead of backing up the entire ROM of your working phone with SPF and then processing that ROM woth MTK Droid, in this case, you will just READBACK the ROM up to the recovery partition and no further. Then do a direct MEMORY WRITE of that partial ROM to your bricked phone. This will unbrick it. But this approach will not allow you to create the CWM recovery.)
Finally, once you've unbricked your phone, you can install either the Flashify or Rashr app on your phone, and use that to flash the CWM recovery image you just made with MTK Droid onto your phone's recovery partition. I usually also flash the boot_patched boot image, which was also created by MTK Droid, to the boot/kernel partition.
Long post, but I wasn't sure if you were up to an adventure. Please note that there is always a risk that you brick your working device if you make a dumb mistake along the way. It's going to be really hard to brick your working phone because you're pretty much just reading from it and not writing anything to it except when you are rooting it....but just be careful. You've been warned. Lol. But I suspect that like me, a bricked device is just a learning challenge. So enjoy.
Don't forget to thank me!
Sent from my Nexus 7 using XDA Free mobile app
I'm not a newbie y
Ya I've been doin this for awhile and have an extensive list of phones I have rooted, debloated, installed custom roms on etc....and I have never had as much trouble with a device as I have with this phone....this pos phone isn't even on their site! I got another phone from boost (same one) And did the same root method....bricked it.....but I still have the one bricked phone....waiting for a stock ROM
Ya man........get a different phone.....
mistaweeks said:
Ya I've been doin this for awhile and have an extensive list of phones I have rooted, debloated, installed custom roms on etc....and I have never had as much trouble with a device as I have with this phone....this pos phone isn't even on their site! I got another phone from boost (same one) And did the same root method....bricked it.....but I still have the one bricked phone....waiting for a stock ROM
Ya man........get a different phone.....
Click to expand...
Click to collapse
Rusty they sent that phone to you special delivery from HELL! They're just testing you, bro. Lol
But seriously, I think if you could somehow get the scatter.txt for the demon (without having to risk rooting and bricking a good one), then it would be possible to use SP Flash to simply read back the ROM of a properly working phone (up to and including the recovery partition) then simply do a direct memory write onto any bricked device. Should wake it up immediately after the flash. The only exception would be if the custpack partition had something really stupid done to it...like someone messing with the buildprop.txt file! That would put it into a head-spinning bootloop.
So the key here for this demon is for someone on this thread to post the scatter.txt file PLUS a working stock ROM. Is there anyone out there who has already successfully rooted who can post a ROM? Or at least post the scatter.txt?
Sent from my Nexus 7 using XDA Free mobile app
CVAngelo said:
Rusty they sent that phone to you special delivery from HELL! They're just testing you, bro. Lol
But seriously, I think if you could somehow get the scatter.txt for the demon (without having to risk rooting and bricking a good one), then it would be possible to use SP Flash to simply read back the ROM of a properly working phone (up to and including the recovery partition) then simply do a direct memory write onto any bricked device. Should wake it up immediately after the flash. The only exception would be if the custpack partition had something really stupid done to it...like someone messing with the buildprop.txt file! That would put it into a head-spinning bootloop.
So the key here for this demon is for someone on this thread to post the scatter.txt file PLUS a working stock ROM. Is there anyone out there who has already successfully rooted who can post a ROM? Or at least post the scatter.txt?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
i tried rooting the new alcatel the same exact way ( usb debugging was enabled both times) and ended up bricking it....i was doing this for my friend...we ended up just going to boost and telling them that there was a defect in the phone they gave him the day before and told them to give him the moto e ( which has so much developement on it its insane)
anyways my friend just gave me the other bricked alcatel one touch conquest and said that if i can fix it i can have it. so i no longer have a duplicate device to work with . can i even flash a stock rom with the original recovery ? im going to try to download the program from alcatels website like you said and see if that works
then if i get it working im going to get the program you were talking about where u said i can make a clockworkmod recovery for it....
CVAngelo said:
Rusty, it's possible that the reason your phone bricked is that it was not fully/properly rooted in the first place. So when SuperSu tried to Un-kingroot it, something went terribly wrong. By the way, had you remembered to turn Developer Options on and set USB Debugging on before running the KingRoot app?
Anyway, there are a couple of options to easily unbrick since you have an identical device.
Note that you can't unbrick by installing TWRP or CWM on your working device, then flashing the bricked device, UNLESS you already have the same custom recovery installed on the bricked device and can boot into that recovery. These recoveries do not provide their backups as a flashable zip, nor are they compatible with each other, which is why you need the identical custom recovery on the bricked phone.
Here is how you can unbrick your device. Go to Alcatel's website and download and install their Mobile Upgrade S software - you will find the link in the support tab for most of their models (or use Google to find it). This is the official Alcatel tool that you would use to flash their stock ROMs onto your bricked phone.
That's the easy method. But if you want a learning adventure, let's pull out your working device. Lol. Go ahead and root it with the King Root app. You may have to try several times to get it fully and properly rooted. Make sure you run a root checker app to confirm that it's rooted. Do not use the SuperSu Me utility yet.
Once you've confirmed it's rooted, install busybox. I prefer the Busy Box X app from Rob Nedi over Stericson's.
Ok, so now we want to install the MTK Droid Tools on your computer. On your phone, make sure USB Debugging is still on. Now connect your phone to the computer and let the drivers for the phone automatically install. Once the drivers are installed, run MTK Droid. It should automatically detect your phone. Next select the Blocks Map button. Then save the scatter.txt file it gives you. Make a folder somewhere because you're going to next use SP Flash Tool to backup the ROM from your phone.
Use Google and XDA to learn how to use MTK Droid and SPF. Here's a helpful link:
http://freaktab.com/forum/mtk-based-devices/mtk-phones/13919-some-useful-tools-for-mtk-phones
Once you've installed SPF on your computer and created the ROM_0 readback of your ROM, go back to MTK Droid Tools and let it break the ROM_0 down into all the partitions that are contained in the ROM. You do this on the root.backup.recovery tab of MTK Droid. Select the "To Process File ROM From Flash Tool". Note that during this process, the Tool will give you the option to create the ClowWorkMod recovery for your phone!
Once the ROM partition files are created by MTK Droid, place them in that folder you created. At this point, you can use SPF to flash the stock ROM to your bricked phone. This will unbrick your phone.
(There's an even simpler way to unbrick your phone with SPF. Instead of backing up the entire ROM of your working phone with SPF and then processing that ROM woth MTK Droid, in this case, you will just READBACK the ROM up to the recovery partition and no further. Then do a direct MEMORY WRITE of that partial ROM to your bricked phone. This will unbrick it. But this approach will not allow you to create the CWM recovery.)
Finally, once you've unbricked your phone, you can install either the Flashify or Rashr app on your phone, and use that to flash the CWM recovery image you just made with MTK Droid onto your phone's recovery partition. I usually also flash the boot_patched boot image, which was also created by MTK Droid, to the boot/kernel partition.
Long post, but I wasn't sure if you were up to an adventure. Please note that there is always a risk that you brick your working device if you make a dumb mistake along the way. It's going to be really hard to brick your working phone because you're pretty much just reading from it and not writing anything to it except when you are rooting it....but just be careful. You've been warned. Lol. But I suspect that like me, a bricked device is just a learning challenge. So enjoy.
Don't forget to thank me!
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
strike the alcatel mobile upgrade S off the list of possibilities...
first of all.... the alcatel onetouch conquest 7046t is not even listed in supported devices, and when i downloaded/ installed mobile upgrade to my windows computer it said " pick your device " and it wasdnt listed in the dropdown menu there either
i still tried selecting the 7047 , because it was closest to 7046, and tried to run the program and it just said it was scaning my device for an ungodly amount of time
so im looking for other methods
mistaweeks said:
strike the alcatel mobile upgrade S off the list of possibilities...
first of all.... the alcatel onetouch conquest 7046t is not even listed in supported devices, and when i downloaded/ installed mobile upgrade to my windows computer it said " pick your device " and it wasdnt listed in the dropdown menu there either
i still tried selecting the 7047 , because it was closest to 7046, and tried to run the program and it just said it was scaning my device for an ungodly amount of time
so im looking for other methods
Click to expand...
Click to collapse
Uh oh! I think I see the problem here. The Conquest runs a QUALCOMM chip! All along, I've been running with the assumption that this Alcatel was running the MTK chipset. Everything I've described here is thus for naught! Those tools, like SPF and MTK Droid, only work with phones that use the MTK platform. They will not even recognize the Conquest.
My sincere apologies, but I don't even know what tools would even work with this sucker. Oh my God... I'm beside myself with embarrassment...I can't believe I made such a serious mistake.
Sent from my Nexus 7 using XDA Free mobile app
Root Alcatel conquest 7046t
Kingroot rooted mine
can the phone work with GSM sim card. i have one piece which is locked i guess coz am overseas and it doesn't work says invalid simcard
Mcrome1018 said:
Kingroot rooted mine
Click to expand...
Click to collapse
Did you get full root with KingRoot? Do your root apps actually work properly? Please confirm as others have reported that the root with KingRoot did not function properly or with all root apps.
Another question several people have is where to get the flashable stock firmware for this phone?
Sent from my Nexus 7 using XDA Free mobile app
CVAngelo said:
Did you get full root with KingRoot? Do your root apps actually work properly? Please confirm as others have reported that the root with KingRoot did not function properly or with all root apps.
Another question several people have is where to get the flashable stock firmware for this phone?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Mine all works, ad away, root browser etc no clue for firmware though
If you are on Lollipop, this guide is NOT for you!
Almost none of this is my work, I just collect it and put it together in one place and I'm writing a small how-to get things done.
PLEASE ONLY PROCEED AT YOUR OWN RISK!!!!!!!!!
ONLY FOR ZX551ML
Bootloader unlock:
Currently the only way I was able to get ROOT on the phone was by installing it from TWRP which required an unlocked bootloader, so the first step is to get the bootloader unlocked, to do this please follow this steps:
1) Enable USB debugging - If you do not know what is that and how to do it, you should probably STOP right here.
2) Download and extract: Unlock 6_ZX551ML.ZIP
3) From the extracted folder run unlock.bat (This will restart your phone into fastboot mode, downgrade the bootloader and unlock it)
4) When step 3 is completed, you need to run restore.bat
If everything went on correctly your boot screen should be inverted (white background, black Asus text). This was the most risky part. I only have my phone and it worked, but if something goes wrong here you might end up bricking your phone, so please take extreme care, always read the messages on the screen!!!!!
Custom Recovery:
1) Now to get a custom recovery, please download TWRP-3.0.2-M1-Z00A.img.
2) Put your phone into bootloader mode, if your phone is currently in use, just use the following commands:
Code:
adb reboot bootloader
Alternatively you can power off the phone, remove the USB cable. Power it back on while holding the volume up button.
3) once your phone if in bootloader mode please use the following command:
Code:
fastboot flash recovery TWRP-3.0.2-M1-Z00A.img
4) Use the vol up & down to select "RECOVERY"
5) Use the power button (short press) to reboot to TWRP
ROOTING
1) Download BETA-SuperSU-v2.74-2-20160519174328-patch-by-shakalaca-for-zenfone2-6.0_(1).zip
2) In recovery select Advanced -> Sideload
3) From your computer use the following commands:
Code:
adb sideload "BETA-SuperSU-v2.74-2-20160519174328-patch-by-shakalaca-for-zenfone2-6.0_(1).zip"
4) Once it's completed installing, restart the phone to system
FLASHABLE STOCK ROM
If you have TWRP installed and you want to flash the latest stock ROM, you will need to, make sure you un-root your phone from the supersu app, reboot to recovery and sideload the zip. You can also copy the zip to your phone and install it from twrp. When installing the stock rom, your bootloader will be locked again, so you will need to unlock it (if you wish), also you will need to root again, because the root is lost. However the modified stock rom will NOT remove the custom recovery giving you freedom to flash whatever you like in the future...
XPOSED
Xposed on our device won't work if we have SuperSu installed. If you want to use Xposed modules you will need to use PHH's SuperUser instead. All files required for Xposed/Magisk/Phh's SuperUser are available in the Xposed folder.
Available modified stock rom versions:
UL-Z00A-WW-4.21.40.141-user-TWRP.zip - Updated: 2016-Oct-07
UL-Z00A-WW-4.21.40.197-user-TWRP.zip - Updated: 2016-Dec-16
Files can be downloaded from: here
Again, please proceed on your own risk.
Special tanks and credits to all the guys who made this possible, namely:
@sorg @social-design-concepts @shakalaca - For bootloader unlock
@jrior001 for the TWRP
@shakalaca - For the modified SuperSU package.
Magisk / systemless should also work?
any way to get back the noninverted Bootscreen?
Tr4sHCr4fT said:
Magisk / systemless should also work?
any way to get back the noninverted Bootscreen?
Click to expand...
Click to collapse
Yes I'm using Magisk, but even with it I wasn't able to use Google Pay. To get back to non inverted, you will need to flash the locked bootloader.
Emil Borconi said:
Yes I'm using Magisk, but even with it I wasn't able to use Google Pay. To get back to non inverted, you will need to flash the locked bootloader.
Click to expand...
Click to collapse
While essentially true the user can always use a different boot animation by flashing one via twrp. There might even be one somewhere of the unmodified asus screen.
Can anyone confirm the flashable Rom mentioned in Post #1 is MM 6.0.1? I ask because my phone upgraded itself right after I booted it up and I wondered if it was on a newer version than the downloadable one. Pretty sure the update was only security updates given it was only around 80mb.
The actuall boot screen is only a couple of seconds long while the boot animation shown
---------- Post added at 10:00 PM ---------- Previous post was at 09:02 PM ----------
Well as usual the linux users drew the short straw. The shell script is for mac users. I decided to see about running the lines manually but never even reached the "danger zone". As soon as I did an "adb reboot bootloader" I followed up with "sudo fastboot devices" (some linux distro's need sudo..some don't)....and nothing shows up although I can clearly see the device is hooked up and in fastboot mode as well as the fact the adb reboot bootloader worked. I swap out one of my other devices and check things...they show up fine in fastboot....ok...so what's missing from this picture?
*update* solved by updating the ubuntu adb and fastboot binaries from here: https://github.com/simmac/minimal_adb_fastboot/tree/master/linux
*update2* bootloader unlocked, supersu flashed and verified. Much appreciated.
I ran the bootloader unlock and it appeared to work. Now it keeps booting back into the bootloader. I can't seem to get it to boot normal. Suggestions?
Nevermind, I didn't realize that I needed to run restore.bat while still in the bootloader. It is booting now! I was able to follow your guide and it is now rooted.
Regarding the marshmallow zip you include. I have a couple questions.
- For the modified stock version that will keep the recovery do I just need to flash it from recovery?
- Do I need to unroot before flashing this modified stock marshmallow?
Thanks!
slgooding said:
I ran the bootloader unlock and it appeared to work. Now it keeps booting back into the bootloader. I can't seem to get it to boot normal. Suggestions?
Nevermind, I didn't realize that I needed to run restore.bat while still in the bootloader. It is booting now! I was able to follow your guide and it is now rooted.
Regarding the marshmallow zip you include. I have a couple questions.
- For the modified stock version that will keep the recovery do I just need to flash it from recovery?
- Do I need to unroot before flashing this modified stock marshmallow?
Thanks!
Click to expand...
Click to collapse
Happy to read you got it booting, by the time I got to answer you seemed to git it figured out.
Regarding the zip, yes flash from recovery and you don't need to unroot before, but you will need to root after flashing.
However I do suggest you make a backup before flashing jsut in case....
Emil Borconi said:
Happy to read you got it booting, by the time I got to answer you seemed to git it figured out.
Regarding the zip, yes flash from recovery and you don't need to unroot before, but you will need to root after flashing.
However I do suggest you make a backup before flashing jsut in case....
Click to expand...
Click to collapse
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
I read this after I went to 6.0.1 from Asus's manual download and update process. I can't get ADB to connect in the OS (developer mode never displays, even though it tells me I'm a developer after doing kernel ver. button process). I tried to get adb devices -l in fastboot and recovery, and it wont discover it. I've tried multiple windows drivers (including the one that worked when I flashed the firmware the first time) to no avail. Any ideas?
Irishman2020 said:
I read this after I went to 6.0.1 from Asus's manual download and update process. I can't get ADB to connect in the OS (developer mode never displays, even though it tells me I'm a developer after doing kernel ver. button process). I tried to get adb devices -l in fastboot and recovery, and it wont discover it. I've tried multiple windows drivers (including the one that worked when I flashed the firmware the first time) to no avail. Any ideas?
Click to expand...
Click to collapse
If windows doesn't see the phone when in recovery there is something wrong, this can be:
1) Wrong driver
2) Damaged USB cable
3) Damaged USB port.
When you are in recovery you should see the phone with adbm if you are in fastboot you should see the phone with:
Code:
fastboot devices
If nothing works you have the nuclear option.
Manually download the original firmware from Asus website: https://www.asus.com/support/Download/39/1/0/26/BXbNqJplzZiLmk6G/32/
copy the zip to an Sd card.
1) Now Turn Off your phone and boot into recovery mode by pressing Power+Volume UP.
2) Now in recovery mode choose to apply update from sdcard.
3) Now select the zip file.
4) Now wait until the process complete and then Reboot the phone.
5) Done!
famewolf said:
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
Click to expand...
Click to collapse
More or less true, but somehow I was on a 6.0.1 version which is now gone from the firmware list of Zenfone, meaning I have updated from 6.0.1 to 6.0.1
Again now I see there is a new firmware released yesterday if I have the time I will patch that system image as well so it can be upgraded with TWRP.
famewolf said:
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
Click to expand...
Click to collapse
Just for you I've just uploaded the 4.21.40.197 release as well... so now there is a point of the TWRP rom's
Emil Borconi said:
Just for you I've just uploaded the 4.21.40.197 release as well... so now there is a point of the TWRP rom's
Click to expand...
Click to collapse
Typical....now you've given me work I need to do on the phone. ;P
Appreciate your work!
Out of curiosity have you tried xposed?
famewolf said:
Typical....now you've given me work I need to do on the phone. ;P
Appreciate your work!
Out of curiosity have you tried xposed?
Click to expand...
Click to collapse
Yes and it works. I tried a few modules, but generally speaking I'm not a big xposed user myself. Nify doesn't work to well because of all the asus software on it and I wasn't able to get google assistant either. Android audo mod worked perfectly, so yeah generally speaking xposed work's
Emil Borconi said:
Yes and it works. I tried a few modules, but generally speaking I'm not a big xposed user myself. Nify doesn't work to well because of all the asus software on it and I wasn't able to get google assistant either. Android audo mod worked perfectly, so yeah generally speaking xposed work's
Click to expand...
Click to collapse
Thanks...that answers all my questions except for figuring out what's safe to disable. I put a post in q&a but no replies..the zoom appears to have a very small group on xda. I'll figure it out eventually.
famewolf said:
Thanks...that answers all my questions except for figuring out what's safe to disable. I put a post in q&a but no replies..the zoom appears to have a very small group on xda. I'll figure it out eventually.
Click to expand...
Click to collapse
Actually most if them can be. Here is a print screen of the ones I have disabled on my phone hover I have a zenpad z380c which I use as my car dashboard and on that one o have disabled almost of all of the apps, except zenhome, audio manager and the file manager.
Yes I was surprised to find out that there is almost no zoom community.
Emil Borconi said:
Actually most if them can be. Here is a print screen of the ones I have disabled on my phone hover I have a zenpad z380c which I use as my car dashboard and on that one o have disabled almost of all of the apps, except zenhome, audio manager and the file manager.
Yes I was surprised to find out that there is almost no zoom community.
Click to expand...
Click to collapse
I'm actually enjoying mobile managers auto startup managing...it's done a good job of keeping 10000 things from running at startup that don't need to although "Startup Manager" would do a similar job for free. I'm liking the zenui launcher and calling screen so don't want to break anything related to that...the phone's been performing exceptionally well for days on end with no required reboots. Been very impressed. Previously been fighting with a T-mobile V10 and an Alcatel Idol 3...the v10 had spontaneous reboots...the idol had a stock rom with a bunch of lag in it....tiny to nothing development on both of those.
What about Zentalk, ZenChoice, PhotoCollage, MyAsus Service center, Clean Master, Audiowizard and Bug Reporter?
famewolf said:
I'm actually enjoying mobile managers auto startup managing...it's done a good job of keeping 10000 things from running at startup that don't need to although "Startup Manager" would do a similar job for free. I'm liking the zenui launcher and calling screen so don't want to break anything related to that...the phone's been performing exceptionally well for days on end with no required reboots. Been very impressed. Previously been fighting with a T-mobile V10 and an Alcatel Idol 3...the v10 had spontaneous reboots...the idol had a stock rom with a bunch of lag in it....tiny to nothing development on both of those.
Click to expand...
Click to collapse
I use tasker for that, but yes I agree as a whole is not bad, this is my 4rd Asus product (Zenfone 4, Zenfone 2, Zoom and Zenpad) and overall I'm quite impressed with how they perform, just the support from Asus isn't really the top of the cream... they released MM when other were releasing N... so yeah a bit of sour taste, otherwise happy. And the camera, I think it's brilliant, not the best on the market, but the optical zoom is cool, as well as the camera app which allows you to do some nice manual shooting.
Emil Borconi said:
I use tasker for that, but yes I agree as a whole is not bad, this is my 4rd Asus product (Zenfone 4, Zenfone 2, Zoom and Zenpad) and overall I'm quite impressed with how they perform, just the support from Asus isn't really the top of the cream... they released MM when other were releasing N... so yeah a bit of sour taste, otherwise happy. And the camera, I think it's brilliant, not the best on the market, but the optical zoom is cool, as well as the camera app which allows you to do some nice manual shooting.
Click to expand...
Click to collapse
I listed a few apps in my previous post I wondered if you had looked at..it was a last minute addition so you may have missed it. I own tasker...I'm unaware of using it to stop tasks from running at bootup although I have used it to MAKE some apps run after "Boot Completed".
famewolf said:
I listed a few apps in my previous post I wondered if you had looked at..it was a last minute addition so you may have missed it. I own tasker...I'm unaware of using it to stop tasks from running at bootup although I have used it to MAKE some apps run after "Boot Completed".
Click to expand...
Click to collapse
Generally tasker can be used for almost anything.... but I'm doing most of the thing with root+shell scripts, but yes nothing wrong with the app provided by Asus. I think everybody uses the setup/software he/she is most comfortable using... and there is no right or wrong.... that's until you are NOT and iCrap user, because that is the ultimate WRONG! )
Emil Borconi said:
Generally tasker can be used for almost anything.... but I'm doing most of the thing with root+shell scripts, but yes nothing wrong with the app provided by Asus. I think everybody uses the setup/software he/she is most comfortable using... and there is no right or wrong.... that's until you are NOT and iCrap user, because that is the ultimate WRONG! )
Click to expand...
Click to collapse
Well from the lack of posts it appears you and I ARE the zenfone zoom community. Any idea where the system updates get stored after downloading? I thought in /cache based on regular zenfone posts but was unable to see it. I've got one available but it has to be modified for twrp compatibility as well as unrooting temporarily.
Official updates for our M2 tablet,
although having installed another
recovery and root access, already.
- Disclaimer
Well, whatever you do with this guide is all up to you and in your own responsibility. You
should have basic knowledge about ADB and flashing, which is explained in many other
threads here on our beloved XDA.
- Issue
When you used this guide (https://goo.gl/r04XjJ) or any other one to give your M2 tablet
another recovery and therefore root rights, you have now the problem, that EMUI will show
you new updates, but you are not able to install them, because of the missing stock recovery,
of course.
- Solution
So, you have to flash back the original stock recovery, getting the official update and then you
can flash back your TWRP recovery.
- Guide
1. You should start your EMUI update programme/app and start the download of your update.
When it is finished, it will ask you to reboot into recovery and install automatically. As you have
no stock recovery I strongly advise not to do so. Usually nothing happens, but there is one case
reported, where it somehow ****ed up the guy's tablet. I am not sure, if that story is true, but
well, I have warned you.
2. Just turn your tablet off after you have finished downloading the update (it will wait now in
the directory "HwOUC" on your tablet and it is called "update.zip" - just let it sleep there).
3. Start the tablet in the fastboot recovery mode, meaning plugging in the USB cable (connected
to the computer) and hold the buttons "power" and "volume down", immediately, until a white
screen appears, which is the fastboot recovery screen. It should tell you, it has the bootloader
unlocked, which is normal, because you did that earlier on with any of the other guides (see above).
4. Copy the downloaded stock recovery of your choice to your ADB directory. In my case this is
"c:\ADB", but this depends on your way of installation.
5. Now open up a command line in Windows (with Windows key + R) and type "cmd") and go to
your ADB directory, using commands like "cd .." and "cd adb".
6. When having arrived in the ADB directory, you have to enter these commands one after the other:
fastboot flash recovery stock-recovery.img
fastboot reboot
If you renamed the recovery file, then you have to consider that in the command, of course.
7. The device will reboot directly into the recovery, because it "sees" the update in the update
directory et voila ... you are getting your awaited update. Sometimes it will boot not into the EMUI
recovery directly, but then you hast have to start the tablet normally, open up the EMUI app and
download the update again and do the OTA update properly with the reboot it tells you to do,
when it is finished.
8. Okay, now you have received your update, but if you want to have back your TWRP, you just
have to turn off your tablet and boot into the fastboot recovery again (see 3.).
9. You have to copy your TWRP recovery to your ADB directory (in my case "twrp.img" in "c:\ADB").
10. Now open up a command line in Windows (with Windows key + R and type "cmd") and go to
your ADB directory, using commands like "cd .." and "cd adb".
11. When having arrived in the ADB directory, you have to enter these commands one after the other:
fastboot flash recovery twrp.img
fastboot reboot
12. The tablet will reboot and you are back to a working lovely updated M2 tablet.
- Root:
If you want to have root rights, I strongly recommend flashing Magisk within TWRP, because it is
just a nice and more modern approach to having root. It works very fine on my M2 10 tablet. The
link for the files and guide is here:
https://goo.gl/UXYk4d
It is very easy. You just flash Magisk 12 in TWRP and then install the Magisk Manager app from the
Play store.
- Files for M2-802L and M2-A01L:
https://ufile.io/0df492 (all four recoveries here)
https://files.fm/u/aajdmadr (all four recoveries here)
https://www.file-upload.net/download-12438839/HuaweiM2recoveries.rar.html (all four recoveries here)
Have fun with your updated tablet. ... and I am happy, if I could help you - any coffee appreciated.
...
..
.
+++ saved +++
Additionally, I can offer you the updates B007 and B010 (most current one) for the
M2 10 LTE (M2-A01L), because I managed to save them/back them up. These are the
European versions of B007 and B010 with all language files, I believe.
So, who is having a M2-A01L and is still sitting on B006 or B007, might try a manual
update, which is as easy as pie. It is just one simple step.
Also, an update from B009 to B010 might be possible.
Of course, I cannot give any guarantee for Huawei's update files, which you will
understand, I guess.
what android version ?? M2-801L, thanks
Eagle-no1 said:
what android version ?? M2-801L, thanks
Click to expand...
Click to collapse
M2-A01L, not M2-801L. For all 8 models you find your ROMs here:
https://forum.xda-developers.com/me...om-8-0-models-stock-marshmallow-roms-t3535466
or
https://forum.xda-developers.com/me...-b207-android-6-0-marshmallow-emui-4-t3533572
or
https://forum.xda-developers.com/mediapad-m2/development/rom-stock-rooted-xposed-t3519031
xsycox said:
Additionally, I can offer you the updates B007 and B010 (most current one) for the
M2 10 LTE (M2-A01L), because I managed to save them/back them up. These are the
European versions of B007 and B010 with all language files, I believe.
So, who is having a M2-A01L and is still sitting on B006 or B007, might try a manual
update, which is as easy as pie. It is just one simple step.
Also, an update from B009 to B010 might be possible.
Of course, I cannot give any guarantee for Huawei's update files, which you will
understand, I guess.
Click to expand...
Click to collapse
I'd greatly appreciate it, if you could share. Got the problem that my A-01L got corrupted. The only official ROM I've been able to find has been B005 what is somewhat old. As it seems to be a pre-release version the tablet doesn't find any updates. Thus I'd like to try to upgrade to B007, or even B010 manually when I'm back home. Currently I'm on a weekend trip as friends of mine are going to marry tomorrow. Thus I'd be able to download them on Sunday evening if you'd provide them.
Regards
Sent from my htc_pmeuhl using XDA Labs
Tried Magisk but can't pass Safetinet test even with Magisk hide enable...
is it working for you?
5m4r7ph0n36uru said:
I'd greatly appreciate it, if you could share. Got the problem that my A-01L got corrupted. The only official ROM I've been able to find has been B005 what is somewhat old. As it seems to be a pre-release version the tablet doesn't find any updates. Thus I'd like to try to upgrade to B007, or even B010 manually when I'm back home. Currently I'm on a weekend trip as friends of mine are going to marry tomorrow. Thus I'd be able to download them on Sunday evening if you'd provide them.
Regards
Click to expand...
Click to collapse
https://forum.xda-developers.com/me...om-official-manual-updates-m2-tablet-t3595211
zedoc said:
Tried Magisk but can't pass Safetinet test even with Magisk hide enable...
is it working for you?
Click to expand...
Click to collapse
I have Magisk running on several devices, including the M2-A01L, but I must admit,
I never got the Safetynet passed, even with Magisk hide enabled.
I just use it as systemless root and with systemless Xposed, which is great.
zedoc said:
Tried Magisk but can't pass Safetinet test even with Magisk hide enable...
is it working for you?
Click to expand...
Click to collapse
xsycox said:
I have Magisk running on several devices, including the M2-A01L, but I must admit,
I never got the Safetynet passed, even with Magisk hide enabled.
I just use it as systemless root and with systemless Xposed, which is great.
Click to expand...
Click to collapse
After enabling magisk hide, you have to reboot your device. Got the 801L working with that and safetynet passes.
Noob Question on recovery files
Hi, and thanks for a incredible well detailed guide for updating. Came here because I haven't found any good recovery files for the wifi model. I've been trying (unsuccessfully may I add...) to install TWRP and magisk. So, my question is: can the recovery files for the LTE model be used on the wifi model? (M2-A01w). Thanks for your help!
myst771 said:
Hi, and thanks for a incredible well detailed guide for updating. Came here because I haven't found any good recovery files for the wifi model. I've been trying (unsuccessfully may I add...) to install TWRP and magisk. So, my question is: can the recovery files for the LTE model be used on the wifi model? (M2-A01w). Thanks for your help!
Click to expand...
Click to collapse
Sorry, I have been on vacation.
To be honest, I am not sure, if the recovery for M2-A01L works on M2-A01w, too, but you can just try it.
I think, there should not be that big a problem, because the recovery has nothing to do with Wi-Fi or LTE, at all. It is just important, that partition tables and drives are accessible the same way and well, I really think, there is not much difference in between the M2 10 models.
From M2 8 to 10 there is a difference, of course. That is why I uploaded both recoveries (for 802L and A01L).
Just use that guide (https://forum.xda-developers.com/mediapad-m2/how-to/guide-unlock-bootlader-twrp-root-huawei-t3322340) without the SuperSU flashing and my recoveries in this guide.
Hi guys,
I need help, I have a M2 10 LTE previously modded with TWRP for root and I've just followed this guide to update from 007 to 010 version.
So I've flashed the stock-recovery, rebooted the tablet, requested the firmware update (I don't know if I got any error during the process) and the tablet has rebooted. Now it's stuck on HUAWEI logo..
I use this tablet for work so I really need to recover it asap.
Please help.
Shocker580 said:
Hi guys,
I need help, I have a M2 10 LTE previously modded with TWRP for root and I've just followed this guide to update from 007 to 010 version.
So I've flashed the stock-recovery, rebooted the tablet, requested the firmware update (I don't know if I got any error during the process) and the tablet has rebooted. Now it's stuck on HUAWEI logo..
I use this tablet for work so I really need to recover it asap.
Please help.
Click to expand...
Click to collapse
Could upload the B010 fullstock ROM/firmware. Thus you could reset the device to the latest stock ROM using the /dload method and gain a factory rested Huawei, as if out of the box. Just quote me if you'd want me to upload and I'll share the link asap. Took that way myself as soon as I found the full stock ROM.
Sent from my htc_ocnuhl using XDA Labs
thanx
Dear xsycox
I have an issue where I updated my W version tablet to L version accidentally and I am having issue getting it back..
I am currently trying to get some help in this thread: https://forum.xda-developers.com/me...-m2-installed-wrong-update-zip-t3563105/page2
Can you please help me out? do you have any idea what ican do to get back to W version?
Thanks!