I have Arc LT15a from Rogers Canada (fw 3.0.1.A.0.145) and want to upgrade to the newest fw 4.0.A.2.368- however, it is available only for LT15i.
If I simply flash the firmware, will my phone work?
(I know the difference between LT15a and i is in frequencies, but they might be entirely hw based- the fw maybe doesn't even "know" what frequencies it is using)
Thanks!
It works fine I just put the new one using the xda flasher tool works great slot faster you have to manually add the apn but I love it so far. You can find the rogers apn info but if you need it I will post it
Sent from my LT15i using XDA App
it works..
Build 4.0 on my Rogers arc.
You can flash any v2.x firmware onto any phone. The firmwares contain both (software) radios for i and a.
However, flashing an "i" firmware onto an "a" phone will NOT give you "i" frequency 3G support and vice versa ("a" firmware on an "i" phone will NOT give you "a" frequency 3G support).
The HARDWARE radios are fixed.
It also doesn't unlock your phone (buy an unlock code) nor does it re-lock a SIM/network unlocked phone (unlocking in once and permanent).
LT15a update 4.0.A.2.368 ad hoc?
Hello everyone.
Does the 4.0.A.2.368 FW comes with Ad Hoc support? or is it just a urban legend?
I am really trying to get ad hoc support for my Xperia Arc. I have already checked around and didn't find any "success" story..
I tried myself with 4 different wpa_supplicants from around the forums.. for android 2.3.3 (my current version)... I was hoping they will work.. but nothing... most of them don't work at all (either the Wi Fi doesn't scan or the phone crashes completely )
I also read a post saying that CM7.1.0 - FXP045 has ad hoc support can anyone confirm this? what about the other functions? given the comments I read on its thread it seems to be rather bugsome...
I also found out this thread for X10
http://forum.xda-developers.com/showthread.php?t=1253087
I will either try that X10 solution to see if it works for ARC ... or go for the update to 4.0.A.2.368 if it has Ad Hoc support already..
I have a Xperia Arc (LT15a) Rogers Branded - rooted - 2.3.3 - 3.0.1.A.0.145
Any help would be great!.. Thanks a lot.
Hi!
I tried to flash the 4.0.2.A.0.58 from the 15i, but with that i get no service and the screen is acting funny.
Is there a 4.0.2.A.0.58 ftf ready for R800i? I read about better Battery Life in the 58, so i want to give it a try.
Greetings
MrMmmkay
Have you tried flashing it with WotanServer? Seems that version is available on there
Ok, i see. Wotan Server is new for me, but i can choose the 58 , just downloading.
Atarii said:
Have you tried flashing it with WotanServer? Seems that version is available on there
Click to expand...
Click to collapse
Hi mate can you please teatch me what is that Wotanserver i've my Xperia Play rooted an can´t install OTA my phone is operator locked and i'm from Portugal tried old firmwares give me a lot of headackes and i've to go back to old firmare 2.3.4
compilation 4.1.A.0.283 this is the one i've and works fine portuguese keyboard with all the accents etc. is there anyone o please have new firmware and tell me if it is values the pain in the ass to erase all the data ? what are the improvements for portuguese version... sorry to be such a noob but i prefer to have my play working like this than have an international keyboard for portuguese (no accent's, dicitonary bla bla) anyone from Portugal have the new firmware instaled help me?
i've got engough for having the message nem firmware available and when download it EIF go to install and says can't install.... F****
sorry for my english and keep on XDA Forum. Sony Ericsson should learn with XDA Team and all the people that help !!!!
I think that the only .58 firmware out right now is for Hong Kong at least it was when I checked yesterday
Sent from my R800i using XDA App
There are many languages in the HK Firmware to, so this shouldt work .
It seems i cant use the Wotan files. There seems to be no way to convert the Wotan Files to use with Flashtool.
I dont want to wipe my Userdata, so i have to use the Flashtool, on Wotan there is no Option to disable wiping Userdata as far as i know .
So, is their a Flastool ready ftf File for R800i anywhere?
<< DOWNLOAD >>NORTH AMERICA / NA
BELL CANADA
2.3.5 - 55.10.280.MB632.BellMobility.en.CA
2.3.5 - 55.10.3900.MB632.BellMobility.en.CA
Click to expand...
Click to collapse
LATIN AMERICA / LATAM
CHILE
Entel 2.3.5 - 5.5.1Q-55.10.282.MB632.Latam.en.01
Movistar 2.3.5 - 55.10.280.MB632.Movistar.en.01
Claro 2.3.5 - 55.10.3600.MB632.AmericaMovil.en.01
COLOMBIA
Movil 2.3.5 - 55.10.3317.MB632.Latam.en.01
Movistar 2.3.5 - 55.10.3506.MB632.Movistar.en.01
Comcel 2.3.5 - 55.10.280.MB632.AmericaMovil.en.01
PERU
Claro 2.3.5 - 55.10.290.MB632.AmericaMovil.en.01
Movistar 2.3.5 - 55.10.3809.MB632.Movistar.en.01
UEA / SOUTH AFRICA
Retail 2.3.6 - 55.1.1032.MB632.MERetail.en.06
Click to expand...
Click to collapse
<< DOWNLOAD >>EUROPE MIDDLE EAST ASIA / EMEA
UNITED KINGDOM
O2 2.3.6 - 55.1.1036.MB632.O2.en.GB
Retail 2.3.6 - 55.1.1036.MB632.Retail.en.GB
FRANCE
Retail 2.3.6 - 55.1.1036.MB632.Retail.en.FR
GERMANY
Vodafone 2.3.6 - 55.1.1038.MB632.Vodafone.en.DE
DACH
Retail 2.3.6 - 55.1.1038.MB632.Retail.en.DE
ITALY
Retail 2.3.6 - 55.1.1029.MB632.Retail.en.IT
SPAIN
Retail 2.3.6 - 55.1.1036.MB632.Retail.en.ES
NETHERLANDS
Retail 2.3.6 - 55.1.1029.MB632.CEE-Retail.en.EU
Click to expand...
Click to collapse
USE AT YOUR OWN RISK !!
some custon ROM or kernel for motorola pro+ of MOVISTAR Argentina?
It also have 2.3.6.
Thanks!!
gvillanueva said:
some custon ROM or kernel for motorola pro+ of MOVISTAR Argentina?
It also have 2.3.6.
Thanks!!
Click to expand...
Click to collapse
I second gvillanueva
instructions required
any body have step to step guide how to upgrade to O2 2.3.6 - 55.1.1036.MB632.O2.en.GB for motorola pro plus i have downloaded the file end extracted but too many files not sure where to start? thanks
Help!
Hi, does anyone know if i can flash the EURO 2.3.6 ROM on an MB632(MOTOROLA OEM VERSION UNLOCKED) with usa bands, i'm in venezuela and on DIGITEL which uses the 900mhz band for 3G, and i can't use 3g because the phone or radio does not support it, i would like to know if anyone knows if the phone is harware capable of using the 900mhz band. Thanks.
Guys! help!! how can i get a fastboot mode i try vol- +pwbn & vol+ +pwbn & vol+ vol-+pwbn and it dont work :'(
sokar311 said:
Hi, does anyone know if i can flash the EURO 2.3.6 ROM on an MB632(MOTOROLA OEM VERSION UNLOCKED) with usa bands, i'm in venezuela and on DIGITEL which uses the 900mhz band for 3G, and i can't use 3g because the phone or radio does not support it, i would like to know if anyone knows if the phone is harware capable of using the 900mhz band. Thanks.
Click to expand...
Click to collapse
Hi guys,
Anybody can help us?
is there any rom [Fastboot][LATAM][NA][EMEA] Motorola Pro + MB632 Firmware including Chinese language?
marbery3 said:
is there any rom [Fastboot][LATAM][NA][EMEA] Motorola Pro + MB632 Firmware including Chinese language?
Click to expand...
Click to collapse
http://dl.vmall.com/c0n8mu5g2j
please, rom with russian language, anybody have this?
thanks.but,this is 2.3.5 for me632,
my pro+ is 2.3.6 ,and it cannot back to 2.3.5.
Flashing Motorola Pro Plus(Pro +) MB632/ME632 ELWAY firmware in detail
For all those who wanna update their Moto pro plus with the latest and last firmware updates which is elway plus 2.3.6 gingerbread firmwares
Here is the link to download respective firmwares what so ever country you belong to : droidevelopers.com/showthread.php?t=12879
And also download latest Motorola ADB drivers from : motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
And RSD lite 5.3.1 from : datafilehost.com/d/33dce367
Once your all done downloading all the 3 requirements Install RSD lite. Extract your firmware into a folder in your PC.
Install moto ADB drivers.
Do not connect your phone yet.
Turn Off your Phone. Hold "R" & "M" & power ON and do not let the R & M buttons until Android with a triangle is shown.
Now hold Volume up and down together which will take u to android system recovery.
Do wipe data/Factory reset and wipe cache partition. To navigate use Volume button and to select use Enter button.
Once done reboot phone and immediately hold volume down.
Note: Do not use volume up. Using volume down scroll to fastboot and then press volume up to select.
Now connect your phone to PC using USB cable.
Let windows install all the required drivers. Wait till installation in completed.
Run RSD lite.
In RSD lite Open file name rsdlite which is a xml file in your firmware folder.
Once selected check below were your phone model and connection status is displayed..Status should be "connected".
Just click the start button and sit back.
It would take approx 5 to 8 min to complete..and once its complete phone will reboot by itself..
If you find fastboot error in the middle of flashing process dnt panic .,,just remove battery and turn it on by holding volume down and go to erase user data and volume up...follow screen instruction...and press volume down again go to fastboot,,
download new firmware again possible belonging to other county,,,and repeat the flashing process again ...it will be all good,,:good:
anyone wanting to root your pro plus can reply to me...:cyclops:
links out
Guys the links are out Can You replace them?
Thanks a lot ^_^
I have a so called Engineering Sample,
im german, so flashed it with 5.5.1Q-110_ELW-TA-41-release-keys-signed.Retail-en-DE,
i did everything as described by Deekx,
wipe data/cache etc. and then flashing via fastboot/RDS Lite ...
Motorola Logo appears, Android Logo is coming up too, and then all that i see is the lock screen which i cant control becouse the touchscreen of my device is not working anymore :/
I´ve read about this problem at different places, but found no solutions ...
does anyone have any ideas on how to fix this? :/
New with Motorola and a bricked phone.
Excuse me! I have a Motorola Pro+ and it just crashed, all I can see is the M logo and when I try to put it on recovery mode the display stays in black without the "hazard" logo and does not react no matter what I do, the only thing I can do is to put it on fastboot mode but I don`t know that to do then! Please help me I'm new with Motorola... Plus, its not rooted, it's just the way it came from the factory... Can I use the sbf files that are posted here to repair it? I mean I bought it in Mexico and now I'm living in Venezuela and I don't know what to do :crying::crying::crying:
I have a problem with my MB632 (o2 from UK)
When I power up, the phone stops/freeze at Red Motorola logo (only removing the battery helps).
* M + R + Pwr - does not work
* Vol-+ Pwr - acces to menu: fastboot, Reboot, Erase USERDATA, Qualcoom Flash, Exit
I used RSD Lite to upload the new firmware: 5.5.1Q-110_ELW-TA-41-release-keys-signed.Retail-en-DE (olny this link work)
All went well until i get message like: "Please manually power up this phone."
But I can't do this (the screen appears red logo motorola) :/
Info form RSD (i have print screen, but can't upload to this post):
IMEI/ESN/MEID: N/A
Technology: N/A
Software version: N/A
Flex version: N/A
Boot version: N/A
DRM version: N/A
Any suggestions?
Hi does anyone have or can anyone point me in the direction of somewhere to download the stock ftf of firmware version 15.1.A.1.5?
I have the latest single SIM FW on my c1905 15.1.C.2.8 UK based Tesco Mobile carrier locked.
I am after the earlier FW in the hope of flashing it and getting the "bug" where the bootloader unlock status changes from yes to no randomly on re-boots as my current bootloader is locked and apparently there is "no possible way" to unlock it
and yes before anyone sends me a link to giyf.com i have searched over and over for it with no luck.
Thanks in advance for any help/info :good:
mindyabiznis said:
Hi does anyone have or can anyone point me in the direction of somewhere to download the stock ftf of firmware version 15.1.A.1.5?
I have the latest single SIM FW on my c1905 15.1.C.2.8 UK based Tesco Mobile carrier locked.
I am after the earlier FW in the hope of flashing it and getting the "bug" where the bootloader unlock status changes from yes to no randomly on re-boots as my current bootloader is locked and apparently there is "no possible way" to unlock it
and yes before anyone sends me a link to giyf.com i have searched over and over for it with no luck.
Thanks in advance for any help/info :good:
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B23...it?usp=sharing
ftf for xperia M 15.1.C.2.8 ..sorry i could not found ftf version 15.1.A.1.5
press thanks if i helped
Hi everyone, i bought a Xperia M 2005(Dual sim) a few weeks ago, but one of the SIM cards isn't working properly, it lose 3g signal at any time and then returns. I have another Sony ericsson, a SK17i with the same SIM card and 3g runs fine, so, i think that the problem may be due to a Baseband issue, maybe is not the correct for my country (Uruguay).
Any idea where i can find the right baseband or the complete firmware for my SIM operator (Ancel)?
Sorry for my english
Thanks.
elbolso23 said:
Hi everyone, i bought a Xperia M 2005(Dual sim) a few weeks ago, but one of the SIM cards isn't working properly, it lose 3g signal at any time and then returns. I have another Sony ericsson, a SK17i with the same SIM card and 3g runs fine, so, i think that the problem may be due to a Baseband issue, maybe is not the correct for my country (Uruguay).
Any idea where i can find the right baseband or the complete firmware for my SIM operator (Ancel)?
Sorry for my english
Thanks.
Click to expand...
Click to collapse
First, there is no spesific baseband for any sim, but you can flash baseband based on your firmware.
Here is the list of the baseband and the guide http://forum.xda-developers.com/showthread.php?t=2703161
Vroyaloko said:
First, there is no spesific baseband for any sim, but you can flash baseband based on your firmware.
Here is the list of the baseband and the guide http://forum.xda-developers.com/showthread.php?t=2703161
Click to expand...
Click to collapse
Thank you very much your answer and that thread is just what i need