Related
Hello,
I cannot connect to my AP on 5 Ghz
It sees it, it asks for password, but then disconnect and reconnect endlessly
Any idea why
Cheers.
One X does not support 5GHz wifi. I see only 2.4GHz in official spec
Oups, I thought it could as i can see it
Switch your router to 2.4, and it will work
I thought it was 2.4ghz only cos of the specification too but i can connect to my 5ghz frequency on my Netgear WNDR3700.
I can see and connect to my Netgear 5Ghz WNDR4500 no problem at all.
You guys can tell me what parameters do you use for your 5ghz ?
Thanks.
My router is fairly new, just bought it 2 months ago. I didnt change any of the settings, just plug & play. Even didnt change the router password.
The problem is with Linksys router's wireless .
even in my house we used to have a Linksys router , kept on disconnected when over 3 devices are connected to it , keeps on disconnected every 2-3 minutes really.
changed the router , and everything is smooth now
ChefChaudart said:
You guys can tell me what parameters do you use for your 5ghz ?
Thanks.
Click to expand...
Click to collapse
WIFI Channel 44
WPA2 AES encryption
Up to 300 Mbps speed setting
5Ghz a/n network types.
That's all the settings that i've configured, although it works out of the box with stock netgear settings too.......
borce_razor said:
One X does not support 5GHz wifi. I see only 2.4GHz in official spec
Click to expand...
Click to collapse
I have seen some places (specs) where is doesn't show the 5GHz, but the phone supports it.
Not able to connect with 5Ghz WiFi AP
harolds said:
I have seen some places (specs) where is doesn't show the 5GHz, but the phone supports it.
Click to expand...
Click to collapse
I have tried to double check this spec on the HTC offical website and it does indicate this phone supports WiFi 5Ghz, as it is with Wi-Fi 802.11 a/b/g/n
htc.com/us/products/htconex-att#tech-specs
however, i have tried to link with a DLink router, DIR-857, and it sees the 2.4Ghz SSID and could connect without any problem, however, not able to see 5Ghz SSID though, i have also tried to set no security and with different channels but seems not have any lucky to this.
i am wondering is there any particular setting to the phone or router double checked with customer service but seem not really help, only ask me to change and try with another AP or router.....
I'm connected to my 802.11a AP with no problems at all. Ditto for 802.11g. I don't have 802.11n here so no idea if that affects it or not.
I didn't need to do anything special on the phone. The AP is a Cisco AP1242AG and it has the usual configuration with WPA2-PSK.
Tiersten said:
I'm connected to my 802.11a AP with no problems at all. Ditto for 802.11g. I don't have 802.11n here so no idea if that affects it or not.
I didn't need to do anything special on the phone. The AP is a Cisco AP1242AG and it has the usual configuration with WPA2-PSK.
Click to expand...
Click to collapse
same as that, i didnt have to configure the phone at all. i just scanned, found the network and connected using WPS push button. Im on 802.11n as well
I have a Netgear Knighthawk router and the main network is one name that utilizes both 2.4 and 5 and as long as the connecting device supports it, it should connect on that band.
My Nexus 5 and wife's S4 which are right next to my Tab are connected on the 5 band.
Any ideas on how I can force the Tab Pro to connect mm on 5?
Thanks
I can't remember in detail but I had mine connected to 5ghz but switched to 2.4 a while back.
If your tab can't see the network or is having a prob connecting to it, then enable broadcast if its disabled
Sent from my SM-T320 using Tapatalk
Try changing the 5GHz channel your router is using.
Sent from my M80TA using Tapatalk
cloud71 said:
I can't remember in detail but I had mine connected to 5ghz but switched to 2.4 a while back.
If your tab can't see the network or is having a prob connecting to it, then enable broadcast if its disabled
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
My network only has one name but it is both 2.4 & 5 so when I connect its only one option.
dodo99x said:
Try changing the 5GHz channel your router is using.
Sent from my M80TA using Tapatalk
Click to expand...
Click to collapse
I will try this, I have been messing with the channels for the 2.4 but forgot to do that with 5.
Thanks
If your using both 2.4 and 5 at same time, that might be your problem. Change the name of one of them. Xxxx5. Or something
Sent from my SM-T320 using Tapatalk
cloud71 said:
If your using both 2.4 and 5 at same time, that might be your problem. Change the name of one of them. Xxxx5. Or something
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
I would really like to keep it as one network, I have had it like this since I set it up and have had zero issues. All AC devices connect to 5 and N to 2.4, this is the first time it may be an issue but my wife's S4 connects to 5 with no issues currently.
Raistlin1 said:
I have a Netgear Knighthawk router and the main network is one name that utilizes both 2.4 and 5 and as long as the connecting device supports it, it should connect on that band.
My Nexus 5 and wife's S4 which are right next to my Tab are connected on the 5 band.
Any ideas on how I can force the Tab Pro to connect mm on 5?
Thanks
Click to expand...
Click to collapse
It seems your tab pro might be defective and not able to connect to 802.11ac, it can only connect to 802.11n which on your routher is running on 2.4GHz.
I had an issue with wifi one, for some reason it wasn't connecting right after some investigations. I enabled ssid broadcast and it worked again. I'm figuri g it was the rom being glitchy.
So try enabling broadcast if its disabled and see it that works
Sent from my SM-T320 using Tapatalk
silvscorp said:
It seems your tab pro might be defective and not able to connect to 802.11ac, it can only connect to 802.11n which on your routher is running on 2.4GHz.
Click to expand...
Click to collapse
Tested out my Tab by connecting to my guest 5ghz network and tab connected fine. My router let's you combine the main network 2.4 and 5 into one name but guest network must be two separate names for the 2.4 and 5.
cloud71 said:
I had an issue with wifi one, for some reason it wasn't connecting right after some investigations. I enabled ssid broadcast and it worked again. I'm figuri g it was the rom being glitchy.
So try enabling broadcast if its disabled and see it that works
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
ssid broadcast was already enabled
Raistlin1 said:
Tested out my Tab by connecting to my guest 5ghz network and tab connected fine. My router let's you combine the main network 2.4 and 5 into one name but guest network must be two separate names for the 2.4 and 5.
Click to expand...
Click to collapse
Are you sure that your guest network 5Ghz is running with 802.11ac and not A/N mode?
There are some incompatibility with tab pro and some routers.
I'm using tp-link wdr4600, 2.4ghz and 5ghz works fine. A friend, using different router, has the same problem as you, and sometimes the connection drops.
Raistlin1 said:
I have a Netgear Knighthawk router and the main network is one name that utilizes both 2.4 and 5 and as long as the connecting device supports it, it should connect on that band.
My Nexus 5 and wife's S4 which are right next to my Tab are connected on the 5 band.
Any ideas on how I can force the Tab Pro to connect mm on 5?
Thanks
Click to expand...
Click to collapse
Have you loaded a ROM other than USA? I'll look for the link, or search for posts by me, but i had a similar problem with an S4, and it turned out to be some countries outside US use different frequencies that keep it from connecting at 5ghz. Just needed to change a couple of settings in some files and all was good, or load a USA ROM.
Sent from my SM-T320 using Tapatalk
I haven't loaded any ROMS, running stock version that came with Tab from my US Best Buy purchase and I also did the OTA update.
I haven't checked if my Tab is running on N or AC when connected to my guest 5ghz network, I will have to check that soon. I will also need to find someone who has an AC network and a different router so I can test it out there, but I have a feeling this may be a little difficult for me to do.
Edit: So I checked my router and the 5GHz guest network is automatically set for a/n/ac and there is no option to change it. When viewing my Tab on the connected devices screen I cannot tell if it's connected as n or ac, how can I find this out? Any way to find this out via the Tab?
Raistlin1 said:
I haven't loaded any ROMS, running stock version that came with Tab from my US Best Buy purchase and I also did the OTA update.
I haven't checked if my Tab is running on N or AC when connected to my guest 5ghz network, I will have to check that soon. I will also need to find someone who has an AC network and a different router so I can test it out there, but I have a feeling this may be a little difficult for me to do.
Edit: So I checked my router and the 5GHz guest network is automatically set for a/n/ac and there is no option to change it. When viewing my Tab on the connected devices screen I cannot tell if it's connected as n or ac, how can I find this out? Any way to find this out via the Tab?
Click to expand...
Click to collapse
you can get a app called "network signal info" and install on your tab and other phones. in the app it can tell you what frequency you are connected at.
silvscorp said:
you can get a app called "network signal info" and install on your tab and other phones. in the app it can tell you what frequency you are connected at.
Click to expand...
Click to collapse
Tried that app out but all I could see on the statistics was that I was connected to the 5.something Ghz band, this was while I was on my guest 5Ghz specific wifi. I did not see anything about being "N" or "AC". Maybe I am not fully understanding this, but I thought AC was always in the 5Ghz band, is that not correct?
I was setting up a new Tab S 10.5 on a relatives network. The access point (router) is not set to broadcast. Of course the first time I wanted to connect I made the router visible and then the Tabs S connect per usual. After that I change the router back to invisible (no broadcasting). I fully expected the tablet to automatically reconnect with the router but that did not happen. I toggled the tablet's WiFi but I could only reconnect after I made the router visible again.
My relatives laptop has no problem connected to WiFi even when the router is not broadcasting. Its likely that some other tablet setting has been turned off. This is a relatives tablet and network so I can't experiment. On the tablet I'd turn off automatic WiFi scanning to save battery. Could that be the culprit?
Basically I'm asking if this is a Tab S issue that other owners have experienced?
Sent from my Nexus 10 using XDA Premium HD app
Try using either 2.4 or 5 GHz channels with standard b, g, n etc.
Also try the same connected to a different brand of router.
UpInTheAir said:
Try using either 2.4 or 5 GHz channels with standard b, g, n etc.
Also try the same connected to a different brand of router.
Click to expand...
Click to collapse
Thanks for your suggestions.
Sent from my Nexus 10 using XDA Premium HD app
Hi!!
I just bought a new tab s4, and I can not connect it to the 5ghz wifi network. It connects, but says connected without internet. The 2.4GHz network connects perfectly.
PS. Sorry for my English.
Same issue.
My tablet is TIM branded.
Same issue, it connects on 2.4ghz but not on 5ghz...
Anyone?
HI peep's mine is connected to 5 GHz and it’s working flawlessly, it’s showing a connected speed of 866MBPS!
Quick questions, did you try a reboot router and Tab S4 once connected to 5GHZ ?
Also are you using separate WPA2 PSK key ?
As some routers can’t handle separate keys, keep the Wi-Fi key same for both channels i.e 2.4GHZ and 5GHZ!
Does it get ip address from the router/dhcp server you have?
I don't have access to a 5Ghz wifi right now. Next week I'll try the tablet and I'll try everything you said. If the new tablet has the same problem of course, I hope it goes well.
speed_boy said:
Does it get ip address from the router/dhcp server you have?
Click to expand...
Click to collapse
See below and bands i have Separate bands!
Galaxy-Tab-S4
dual stack
Galaxy-Tab-S4
device info type 5 GHz
IP address: 000.000.0000 (DHCP)
MAC address: 77:EE:00:FFD:00
I have the same problem and I noticed that it came with the Anroid Pie update! 2,4G is working fine in my S4.
I have another tablet Samsung Galaxy Note 10.1 2014 edition and 5G Wifi is working flawlessly.
Might it be software issue in Android 9?
My basebandversion is T835XXU3BSF4, kernel 4.4.153-16124683 #2 Fri Jun 14 2019.
My Tab S4 was ,finally, updated to Android 9. 5GHz working fine. Both 5GHz and 2.4GHz working fine...
All good here...
I got one coming in the mail and will report back on my success but if you don't get internet trying setting your dns manually to Google's public one for testing. 8.8.8.8 Could also be related to the channel the router is using for 5ghz.
Malcolm
Okay, so I got a new tab s4, and I have the same problem. At the second floor of my house, I don't connect to the 5Ghz wifi. I have separated bands. I tried changing the channel... I don't know what else try.
InsertCoin_Pls said:
Okay, so I got a new tab s4, and I have the same problem. At the second floor of my house, I don't connect to the 5Ghz wifi. I have separated bands. I tried changing the channel... I don't know what else try.
Click to expand...
Click to collapse
5GHz WiFi has less range than 2.4GHz, maybe the signal strength is not enough at the second level. Use the lowest frequency band available, move the base unit to a place less obstructed etc. This does not sound like a device issue.
1eStar said:
5GHz WiFi has less range than 2.4GHz, maybe the signal strength is not enough at the second level. Use the lowest frequency band available, move the base unit to a place less obstructed etc. This does not sound like a device issue.
Click to expand...
Click to collapse
Yeah, I know, the device issue is that all my other phones, computers and devices are able to connect to the wifi. I enabled the smart wifi and it looks like it's going better, the tablet is able to get better download speed.
I have Samsung Note 10 Plus , it shows wi-fi 6 logo when connected to Asus Wifi-6 router AX88U. Sometimes, when I leave my home and come back, the Note 10 plus does connect to AX88U wifi-6 but the speed is slow (about 50 mbps on 200mbps connection). If I turn off wifi on my phone and turn it back again. I get blazing fast 226 mbps. I did check some forums and was advised to change phone wifi setting is to static IP with primary DNS to 8.8.8.8 and secondary dns as 8.8.4.4 but this does not help.
Other steps taken: I disabled Wifi-6 on my router, but issue does not go away even when wifi ac (5Ghz) is being used.
Also, I have done "forget" network on phone, restart phone, reprogram Wifi setting. No use...
Another interesting fact: I have connected Netgear R7900 (wifi ac only, Mu-mimo) in AP mode to AX88U via cat7 cable. One day, I had observed that as I entered my home, my phone had connected to the Netgear router and the download speed was 200mbps with ping of 8 milliseconds. While I was roaming in the home, I was simultaneously browsing a few websites on my phone, and I observed the phone went from Netgear to ASUS router because I could see Wi-Fi logo without the Wi-Fi 6 symbol and then as soon as it hooked to Asus, I could see Wi-Fi logo with Wi-Fi 6 symbol. All of a sudden, the download speed as tested on speed test app went down from 200 Mbps to 6 Mbps. I switched off the Wi-Fi of my phone and switched it back again. the phone then connected with ASUS router on Wi-Fi 6 and the download speed was 200mbps. So this means that my phone performs very poorly when first-time re-connected to ASUS router. Would this be an issue with my phone not receiving signals properly - because of some issue while acting like a wifi-6 client?
Can someone please advise me how to have my phone connect to router with full internet speed? This only happens if I go out of home and come back in AX88U signal range. Also is this a router issue or phone issue? All other devices in my home are wireless ac (Wifi 5) only and have no issues with Asus router. Asus customer support is pointing finger on the Note 10 plus. Please help!
From what you've described here I would say the issue lies with the assus router. Since the netgear works fine.
On reconnect maybe it's not recognizing the phone properly. When it reconnects to your phone with slow speeds have you checked the router's connected device map? (shows what devices are connected to it) does it recognize properly?
lennie said:
From what you've described here I would say the issue lies with the assus router. Since the netgear works fine.
On reconnect maybe it's not recognizing the phone properly. When it reconnects to your phone with slow speeds have you checked the router's connected device map? (shows what devices are connected to it) does it recognize properly?
Click to expand...
Click to collapse
Thank you lennie for your reply. Yes, the device shows up on clients list/ device map. Router does handshake immediately but does not transmit proper speeds. Only difference here is Netgear is AP and is Wifi 5 (ac Mu-mino), whereas Asus ax88u is Wifi 6, ax, main router. So phone does talk well to Netgear but in ac mode. Phone immediately talks to Asus in ax mode but slow speeds. If there is any other way out please let me know... TIA.
gaggz said:
Thank you lennie for your reply. Yes, the device shows up on clients list/ device map. Router does handshake immediately but does not transmit proper speeds. Only difference here is Netgear is AP and is Wifi 5 (ac Mu-mino), whereas Asus ax88u is Wifi 6, ax, main router. So phone does talk well to Netgear but in ac mode. Phone immediately talks to Asus in ax mode but slow speeds. If there is any other way out please let me know... TIA.
Click to expand...
Click to collapse
Hmmm have you tried to reset network settings on your phone yet? But I seriously think it's a problem with the router and not the phone.
Does this problem only happen to the Note 10 and no other device?
Have you checked for router updates?
Do you use a private DNS service? VPN?
Do you have WiFi power saving mode enabled?
lennie said:
Hmmm have you tried to reset network settings on your phone yet? But I seriously think it's a problem with the router and not the phone.
Does this problem only happen to the Note 10 and no other device?
Have you checked for router updates?
Do you use a private DNS service? VPN?
Do you have WiFi power saving mode enabled?
Click to expand...
Click to collapse
Hi lennie
I did reset network settings, including forget network>reboot> re-program wifi password. Nothing worked. Router is updated. I do not use private DNS or VPN. Not sure about power saving, all settings are default... Also; in the past I used to have Netgear R7800 as main router and R6900P as AP, such incidents did not occur. Not sure where the problem lies. While contacting respective customer care, Asus blames Samsung and vice versa.
gaggz said:
Hi lennie
I did reset network settings, including forget network>reboot> re-program wifi password. Nothing worked. Router is updated. I do not use private DNS or VPN. Not sure about power saving, all settings are default... Also; in the past I used to have Netgear R7800 as main router and R6900P as AP, such incidents did not occur. Not sure where the problem lies. While contacting respective customer care, Asus blames Samsung and vice versa.
Click to expand...
Click to collapse
FYI for everyone - I just got on phone, my 4th time with Asus. They finally agreed that one more user was facing same issue so they have taken feedback seriously and are addressing this connectivity issue via another firmware update. No idea when this would be released. Asus asked me to return to original seller (an individual on eBay as it is within 30 days of purchase) or send to Asus for service. If service, then I will have to pay for shipping and arrange for a temporary router myself. Hence returning to seller on eBay. So we do have issues where router will not talk well with certain devices!
gaggz said:
FYI for everyone - I just got on phone, my 4th time with Asus. They finally agreed that one more user was facing same issue so they have taken feedback seriously and are addressing this connectivity issue via another firmware update. No idea when this would be released. Asus asked me to return to original seller (an individual on eBay as it is within 30 days of purchase) or send to Asus for service. If service, then I will have to pay for shipping and arrange for a temporary router myself. Hence returning to seller on eBay. So we do have issues where router will not talk well with certain devices!
Click to expand...
Click to collapse
OK thought so. Glad to hear that they've taken your issue. There's a reason people don't buy Asus products anymore like they use to especially motherboards. They tend to do some things right and others just wrong which you usually don't find out until it's too late.
lennie said:
OK thought so. Glad to hear that they've taken your issue. There's a reason people don't buy Asus products anymore like they use to especially motherboards. They tend to do some things right and others just wrong which you usually don't find out until it's too late.
Click to expand...
Click to collapse
Thanks lennie - any suggestions for a good router? I have one R7800 acting like AP, handles about 15 devices on 2.4Ghz (IoT - smart plugs, 3 wifi cameras @720p, not too much data load; and AX88U main router that handles about 8 devices, where most work is done, like iPads, Cellphones, Laptops on 5Ghz. I need to choose one main new router as I want to get rid of AX88U. Shall I get another R7800 as I did not see any performance difference between Wifi 5 & 6 on a 200mbps bandwidth - or I have shortlisted Wifi-6 RAX80 Netgear as main router. Any advice? TIA!
gaggz said:
Thanks lennie - any suggestions for a good router? I have one R7800 acting like AP, handles about 15 devices on 2.4Ghz (IoT - smart plugs, 3 wifi cameras @720p, not too much data load; and AX88U main router that handles about 8 devices, where most work is done, like iPads, Cellphones, Laptops on 5Ghz. I need to choose one main new router as I want to get rid of AX88U. Shall I get another R7800 as I did not see any performance difference between Wifi 5 & 6 on a 200mbps bandwidth - or I have shortlisted Wifi-6 RAX80 Netgear as main router. Any advice? TIA!
Click to expand...
Click to collapse
Tell you the truth I wouldn't know. But I would go with what works, if the R7800 are works then I don't see why not.
lennie said:
Tell you the truth I wouldn't know. But I would go with what works, if the R7800 are works then I don't see why not.
Click to expand...
Click to collapse
I got informed via another forum subscription that a new AX88U firmware update was out.......
It also happened around the day I was in a bitter situation as I was waiting for seller on eBay to accept my return request. He is a good guy who did not use the router on Ax devices. Now that I have purchased from him and using it on ax client, we came across this issue. Immediately upon reading this note, I updated the router firmware. I then went outside my home for a short walk but when I came back, my cellphone still had poor download speed with router upon reconnecting on 5Ghz. I explained this new observation and sent screenshots of speedtest and the seller kindly accepted my return request. Sadly this update did not sort out my issue.
But here is the good part: I had purchased a new AX88U at full price from Amazon. Initially I noted my 2.4 Ghz speed was very poor 4-25 mbps even when "6" was seen in wifi logo, means cellphone and router were on some new signal standard. With this update, I am getting 7 ms ping and 120-130 mbps download speed (same speeds on 2.4 Ghz with the "faulty" router described above). So this update did really speed up the internet speeds most evidently seen on 2.4 Ghz frequency. Also worth noting: I am not having the "poor download speed upon reconnect" with the brand new router that I just got.
Hello from Germany
This is a bug i already noticed and spent hours and hours with my Note 10 Plus and Asus AX88U !!! Now after 2 Month i give up. If you have 2 same 5GHZ Networks in your house (for better coverage) with the same SSID you can
see what is happening. My Internet Provider Speed is 200 down and 80 up. When first connected to the Asus Wifi 6 Router everything is fine. Than when you go one floor up you will get connected to the Other (i have tested both Asus AI and also as normal Access point via Ethernet ) Router and everything is ok. But than when you go back and connect again with the Asus AX88u in Wifi6 the Download speed on my Note 10 Plus is capped at 4-7 mbps down and 10 up !!! from 200/80. This is only affecting on the new Asus AX88u and Note 10 Plus and it doasn't metter if you switch Wifi6 or use Wifi5 AC . I tested also without 160 Mhz and every other mode nothing is changing. The sync on the Note 10 Plus is 1200 mbps on 5 GHZ so the most possible sync between note 10 device and the Router !! But after you connect to the same SSID on other channel in your house you will have this bug when returning to the Asus AX88u ! Only way is WIFI off and ON and all Speed are back again on Note 10. I have written to Samsung but no one replyed. With other devices like IPAD Pro 12.9 2018 or some Xiaomi devices everything works fine. Only Note 10 Plus is having this Bug . Most of the People will not notice it because almost all services will run fine for them with 10 mbps but i do because i always have my note 10 with Network Data in Statusbar and want to know all the time my network speed etc.
Sry for my English but i hope you understand. Definitly a AX88u Bug !
UPDATE: I tested with new Firmware from 25 of November they seemed to fixed it !!!
Update again : The Bug is still there! Almost every time when u roam in your house and reach again the wifi 6 router from Asus.
Again I have two wifi in my house with same ssid and different channels. It doesn't matter if you put the second router in access point mode or normal router(connected via ethernet cat 6 to Asus) . I also tryed a second Asus Router in Asus Mesh mode wired and over WiFi. Still same behavior.
When first connected to the Asus rt ax 88u with my note 10 plus everything is fine. The wifi sync is 1200 mbps when in same room and I get all of my isp bandwidth 200/80 from my provider. When I move upstairs and reach the second Hotspot the phone automatically switches to the other router (also tested different once). Also here everything is OK you get the full bandwidth up and down. But as soon as you return to the wifi 6 coverage of the rt ax88u the wifi speeds are dropping to almost 4-7 mbps! Down and maximum 20-30 up. Really strange behavior the sync is normal with 1200 mbps but you get no bandwidth! When moving up to the other network everything works fine again.
Also tryed with switching of ax mode but same problem with AC mode. This is a huge bug with Galaxy note 10 plus and Asus AX 88u Router
I recently acquired the Tenda NOVA MW6 mesh network, and have noticed wifi speed issues only with my note 10, not with roku 4k, not with my box S, not with galaxy tab s6, only with note 10, my cablemodem, it has the option wifi, also had problems, also only with note 10 ....
bovoro said:
I recently acquired the Tenda NOVA MW6 mesh network, and have noticed wifi speed issues only with my note 10, not with roku 4k, not with my box S, not with galaxy tab s6, only with note 10, my cablemodem, it has the option wifi, also had problems, also only with note 10 ....
Click to expand...
Click to collapse
Same here, also the Tenda NOVA MW6, and also only speed problems with my Note 10. The reason why t¡is because Note 10 connects to 2.4 Ghz network that seems to be much slower than 5Ghz. Sometimes, out of the blue, Note 10 connects to 5Ghz wifi and then no speed problems at all. I'm trying to find out how to force 5Ghz connection or how to turn off 2.4 Ghz on Note 10, but Google disabled that options in last Android version. So, there seems to be no solution, maybe rooting could solve the issue.