[ROM][MM 6.0.1] [ KatKiss - KatshMallow #029 ] [MultiWindow] - Transformer TF300T Android Development

[ROM][MM 6.0.1] [ KatKiss - KatshMallow #029 ] [MultiWindow] - Transformer TF300T Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KatKiss ROM
MarshMallow 6.0.1 ReleaseAsus TF300T
Please note that this version is made for and tested on the TF300T model.
This rom is an aosp based rom with my own additions on top of it.
The main motto of the rom being Kiss. Even though the Meerkat could give you a kiss, it stands for Keeps it Sweet and Simple too
Which means that just like the other K.A.T stuff, the rom's main goal is efficiency, speed/responsiveness,
while not adding bloated features that will slow things down

DOWNLOADS:
TF300T Latest Rom Version: KatKiss-6.0_TF300T_029.zip | Mirror
TF201: See the TF700 thread
Gapps: OpenGapps ARM 6.0 Pico
(if you want Now on Tap use the nano version, and activate Now on Tap from google now settings)
Latest SuperSU: SuperSU BETA 2.52
Sound improvements & misc : install the K.A.T App
Thanks to keep this thread for the TF300T

Install Instructions:
Install KANG TWRP Recovery
Backup everything !
Boot into the recovery
The first time or everytime you have an issue when dirty flashing (Especially when changing android versions):
[*] do a full wipe , if you have issues make sure that you format /data (format is different than wipe)
Warning: formatting will remove what is stored in your internal storage, so store the rom /gapps/supersu zips onto an external storage (microSD, SD card..) or make sure you know how to push them back through adb.
Change /data filesystem to f2fs
Then everytime (even when "dirty flashing") do the following steps:
Flash the rom
Flash the SuperSU zip
[*]Flash gapps
Wipe cache/dalvik
Reboot
Rom Main Features:
MultiWindow Support with 2, 3 or 4 panes setup
High speed and responsive oriented
High performance and overclocked KatKernel included
Built with UberTC 5.4, graphite, -O3 & High optimization flags
Dock keyboard Support with full special/function keys support
Global Keyboard Shortcuts / KeyOverride Macro association (See post #2 for more info)
HDMI Support
Battery Level Indicator & Dock Battery support + Mods (icon/Text/%)
F2FS, CIFS, ext4, NTFS & Exfat support
RRO Theme Engine - Themes & more info
Native Android FSTRIM + Manual scripts for Database optimization and fstrim (see post #2)
Media Scanner Filters
Navbar with left, balanced (PixelC like) or middle aligned buttons.
All Wifi channels support
Integrated cpu & io performance settings panel
Custom Navbars buttons long press actions
Advanced power menu with reboot options.
User Immersive mode and actions with automode when docked setting
Advanced per application permission management (AppOps)
Ethernet-auto support
Misc utils Busybox, rsync...
Custom Quick Settings tiles
Included KatKernel Main Features:
-- Based on latest Asus 10.6.1.27.5 version.
-- CPU Overclockable up to 1700 (1500 default), GPU overclock (OC 520 by default) , uservoltage
-- Built with UberTC GCC 5.4, -O3, graphite + Optimized flags
-- F2FS support
-- governors: interactive pegasusq conservative ondemand powersave performance
-- iosched: BFQV7r5, ROW, SIO, deadline, NOOP, CFQ
-- FS: ext3-4, VFAT, NTFS, F2FS, NFSV3+4, CIFS
-- TCP Congestion: illinois cubic veno reno bic westwood highspeed htcp vegas scalable yeah
-- Asynchronous Fsync
-- USB NET drivers
-- lowmemorykiller: misc optimisations & fixes
-- backports from more recents kernels (3.4,& 3.9)
-- SLUB
-- exposed SOS/LNX
-- Restrict slave mountspace so Dalvik apps can mount system-wide volumes
-- Misc optimization & fixes: cpufreq, block, mmc, i2c, sched, rcu, arm specific routines, ...
-- Misc security fixes, futex, tty ...
ChangeLog: http://public.timduru.org/Android/KatKiss/6.0/ChangeLog.html
Rom Source: https://github.com/timduru (branch katkiss-6.0)
Kernel Source: https://github.com/timduru/tf300t-katkernel
Credits: Original banner concept by i9apps, Bootanimation by mgeniusm, original drawing by BBF, tetsuo for his contributions, Chainfire for SuperSU
WebPage
How to report
What to include in the report
Disclaimer: The usual
Use at your own risk, I won't be responsible for any damages caused to your Transformer or to yourself.
In most cases if something breaks, flashing a rom on top should fix it.

XDA:DevDB Information
KatKiss-MarshMallow, ROM for the Asus Transformer TF300T
Contributors
timduru
Source Code: https://github.com/timduru
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.1.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-10-31
Last Updated 2016-08-05

Tips
First Install
Make sure you do a format /data the first time you install the rom
(backup your internal storage first if you want to keep something)
The first boot after a rom flash can take a few minutes as ART is slower than dalvik to optimize the applications, but is faster after the 1st time.
(First boot takes ~4-5 minutes without gapps and 10+ minutes with gapps)
Also keep in mind that after a fresh install, it might take a bit of time to get up to full speed as media scanner & google are checking/scanning and restoring stuff.
Bluetooth
Bluetooth might require to be turned on twice before it scans and displays the available devices.
Wallpaper Modes
Different Wallpaper modes have been added in Settings => Display
** Normal (regular android mode)
** Disable System Wallpaper rendering (set as default)
** Disable Wallpaper service
2nd setting will prevent the wallpaper being rendered by the system making things faster and also freeing resources
That's the recommended setting you want to use if you are using a launcher that has internal wallpaper rendering
The Default included Launcher3 has internal rendering
For Nova: Go to its Settings => Desktop => Wallpaper Scrolling => Force, then set a wallpaper.
(You will see a black wallpaper if you're not using a launcher that can do internal rendering, If wallpaper is important and that you want to keep your current launcher, then switch back to the 1st setting)
Google Play Movies
Our current Widevine DRM libs are not compatible in MM.
So you can't play a movie on the tablet with Google Play Movies as it requires that.
Starting a movie to play on chromecast should be fine as the drm will be the chromecast one in that case.
Hardware keyboard layouts
More languages have been added in the default asusec keyboard
Set the keyboard layout through Settings => Language & Input => asusec => setup keyboard layouts
These also allow live switching without reboot with ctrl + space
Global Key Override/Shorcut Mecanism
Available in Settings => Dock => Add Key Override Actions
This will allow you not only to redefine function keys assignment, and other special keys actions,
but you'll also be able to assign global macro actions / app launch to any key + Meta key combination (shift Left or Right , ctrl..)
You can also add multiple actions to one key combination, simply click again on the "+" button for the same key combination.
For example if you want to assign to one key combination a list of action to run before going to bed for example, like: turn wifi off, Bluetooth off, mute sound, and turn screen off, you can do that
Note that starting multiple applications with one key is kinda a miss and hit for the moment due to some mecanism in android that seems to prevent applications to start too close to each others.
Storage (fstrim) and Database optimization:
Fstrim is native since 4.3 and will happen in the background if your tablet is idle / sleeping and that your battery is > 70%
There is also a script to run it manually in the rom: /etc/kat/optimizestorage
To optimize the Database: /etc/kat/optimizedb
To run both, open a terminal and run:
su
/etc/kat/optimize

MultiWindows
Multiwindow allows you to split the screen in 2, 3 or 4 panes
you can switch an app back and forth between multiwindow mode and regular mode while it's running
NavBar:
- To switch between full screen and split View you can use the
NavBar Buttons
The app that currently has the focus (or the latest used app if you're on the Desktop) will be used for the main pane (left and/or top depending on the mode and rotation)
And it will lay the remaining most recently used apps in the rest of the available 1-2-3 panes depending on the icon you click
- If you press a multiwindow icon again when in splitview mode, it'll bring the focused app back to fullscreen mode.
- To swap the 2 latest focused apps location / pane , long press on the
NavBar Button
- To change focus simply Tap on the app or use the
NavBar Button
That button can also be used in non multiwindow mode to switch quickly between the 2 most recent apps.
Global Actions:
Actions to switch the app between fullscreen / splitview 2-3-4 panes and switch between the 2 most recent apps have been added
so you can bind them to a key / key combination with the Global KeyOverride or long press on navbar button too.
Note: Most apps works ok in splitview mode, but some of them might crash or not refresh correctly sometime.
To manually position an app in one of the pane:
For the moment either reorder your apps before clicking on an auto mode icon,
or you can also activate the default Marshmallow Multiwindow mode to get extra icons to positions an app in a specific pane (activate it in developer options )
Then position the apps with the icons from the Recents screen. (default MM recents icons are for 2 or 4 panes)

Banners

very impressive. guessing it wouldnt be good to uupgrade from 5.1.1 but do a clean flash?

Insane PPC said:
very impressive. guessing it wouldnt be good to uupgrade from 5.1.1 but do a clean flash?
Click to expand...
Click to collapse
Yeah, you'll need to format /data

New Version #004
New rom version available: KatKiss-6.0_TF300T_004.zip
Make sure you read the first post to see what is not currently working or implemented.
Make sure you format /data before installing. (only ext4 supported for the moment)
Use gapps and the new beta supersu linked from the 1st post.
As usual the first boot with gapps will take some time: ~7-10 minutes.
Just be patient.
ChangeLog:
- Bring up those Sh'mallows !

timduru said:
New rom version available: KatKiss-6.0_TF300T_004.zip
Make sure you read the first post to see what is not currently working or implemented.
Make sure you format /data before installing. (only ext4 supported for the moment)
Use gapps and the new beta supersu linked from the 1st post.
As usual the first boot with gapps will take some time: ~7-10 minutes.
Just be patient.
ChangeLog:
- Bring up those Sh'mallows !
Click to expand...
Click to collapse
You are truly amazing. :beer:

Format data
timduru said:
New rom version available: KatKiss-6.0_TF300T_004.zip
Make sure you read the first post to see what is not currently working or implemented.
Make sure you format /data before installing. (only ext4 supported for the moment)
Use gapps and the new beta supersu linked from the 1st post.
As usual the first boot with gapps will take some time: ~7-10 minutes.
Just be patient.
ChangeLog:
- Bring up those Sh'mallows !
Click to expand...
Click to collapse
Hi
I wanna ask: wenn i format data, will it not erase all my previous backups?

It will yes. Thus I made a backup to my computer.
Sent from my XT1032 using Tapatalk

New Version #005b
New rom version available: KatKiss-6.0_TF300T_005b.zip
ChangeLog:
005:
- Add F2FS support on /data
- Add Global Dock KeyOverride shortcuts
- Add Missing Dock function Keys implementation
- Add NavBar UI settings change for left or centered buttons
- Add User Immersive mode
- Add Auto immersive mode on docked
- Add Global actions
- Add Touchpad disable
- Add back SL101 Lid override conf
- Add Reboot modes in power menu
- Prevent system restart when orientation sensor is not fully initialised
- Fix AppOps crash on launch
- Fix MicroSD & UsbDisk not mounting
005b:
- Fix MicroSD & UsbDisk not mounting when /data is f2fs

Man, this looks like really awesome news! Is it really TF300 exclusive or is there any chance this Rom will ever make it to the TF201?

timduru said:
For the moment, only the native Marshmallow Multiwindow is supported
(activate it in developer options )
Then position the apps with the icons from the Recents screen.
Click to expand...
Click to collapse
Hallo. How to do this (activate it in developer options )?
I must say you are the MAN and you do a grait job. Thank you. I put your rom on tf300tg. Of course 3g is not working.
---------- Post added at 07:26 PM ---------- Previous post was at 07:08 PM ----------
Carlosk1966 said:
Hallo. How to do this (activate it in developer options )?
I must say you are the MAN and you do a grait job. Thank you. I put your rom on tf300tg. Of course 3g is not working.
Click to expand...
Click to collapse
Never mind. I found how to activate Multiwindow.

Carlosk1966 said:
Hallo. How to do this (activate it in developer options )?
Click to expand...
Click to collapse
There's a Setting called "Multi-Window mode" if you scroll down on the page, simply activate the option.

timduru said:
There's a Setting called "Multi-Window mode" if you scroll down on the page, simply activate the option.
Click to expand...
Click to collapse
Thank you Tim, I fond it.

So far working very well thanks timduru!
Sent from my XT1032 using Tapatalk

Edit: never mind...it s working ok

+1000000
Enviado desde mi D6603 mediante Tapatalk

Wow
What a way to take a dated tablet and breathe new life into it! I don't think my tablet has ever run this smoothly! Thanks for your efforts!!

This is pretty cool. Thanks dude!

Related

[ROM] [6.0 and 5.1] nAOSProm for Xperia Acro S

nAOSP ROM 5.1 and 6.0 for Xperia Acro S
The purpose of this rom is to provide a rom not so far of the AOSP with some cool features (nAOSP means "near AOSP").
As I'm using some external works to do this rom, I first want to thanks the community and specially billchen1977,ViPER4Android Team ,Cyanogenmod Team , FXP Team
I have not this device and so @vsergeyev convinced me to do it and he has done all the tests. You can thanks him.
A lot of things (like the flashing procedure) will point on Xperia S thread where I'm active. You can post in Xperia S thread if needed EXCEPT if this is relevant to Acro S (flashing, adoptable/portable external storage etc).
About Adoptable storage on Android 6:
You are free to use portable or adoptable option for your external sdcard. Don't forget that if you answer "Adoptable", the external sdcard will be FORMATTED and will NOT be usable on an other devices. If you want the classical behavior, you will need to select "Portable"
nAOSP 6.0 Marshmallow Changelog (features, issues, etc)
b12
Please read the associated post to don't have issues with Superuser
android-6.0.1_r61 (August security fixes)
Superuser: Bye to Superuser, welcome to Superuser with AppOps
su: Support for multiuser and the new Superuser
Ui: Battery styles (see Settings/nAOSProm/More) - compatible with GravityBox (thanks @millosr)
Ui: Optimizing application displays the application name (thanks @millosr)
ROM Updater : Remove download action from notification
Layers: doze invert color is now automatically set by the theme (manual option removed)
Bluetooth: Accept all incoming files
Settings: Display safe entries into nAOSP section (depends on current user, root access ...),battery styles, substratum, root access control per user
SELinux: add missing nfc and mediaserver rules (+ fix selinux denied ioctl by checking binder fd type: sockets using ashmem accessors)
Boot: check f2fs not run anymore
kernel: bma250: more fix about bma250_ic_write issues when motion (pickup/significant) are in use with accelerometer.
Gapps: /persist/gapps-config.txt
include b11 (unreleased for acroS)
Daydream: supported (see Settings/Display) - disabled by default
Sensors: Significant motion added (Full doze and localization/low power mode support) - disabled by default
Sensors: Pickup sensor implementation reviewed (just a high_g detection on Y axe) - disabled by default
Kernel: accelerometer: merge bma250_ng and bma250_motion drivers to avoid conflict and provide a better hardware managment
Kernel: cpufreq: Fix issues when a cpu goes back online and was clocked to the max frequency of 2.05 Ghz.
Kernel: Color calibration: full support of RGB Multipliers with kcal_ctrl driver implementation.
Kernel: Leds: Store the brightness requested. That permit to better control the requested brightness when thermanager/other changing the max_brightness value.
CPU Hotplug: mpdecision daemon is back (will manage cpu1 online state)
Offline charging: new pictures for chargemon (thanks @Jurn_Software)
Day/night mode: support new kcal_ctrl driver.
Settings: Enable/disable some sensors (pickup, significant motion, ...), Support substratum application
Themes: Full support of Layers 4.0
Dialer/InCall: Automatic spearkerphone (see Dialer/Settings/proximity speakerphone) - disabled by default
Translations: update for uk @Jurn_Software ), fr
include b10 (unreleased for acroS)
android 6.0.1_r46 (June Security patch)
Settings: Double Tap to sleep can be disabled (thanks @millosr)
Quick Settings: Immersive mode (hide NavBar and/or Status Bar). If you dirty flash, you can add it with SystemUI Tuner. (thanks @millosr)
Dialer: Fix "invalid number" issue (based on @runekock feedback. thanks)
include b09_r43 (unreleased for acroS)
Eleven updated
TWRP: 3.0.2+
Previous versions
b09
android 6.0.1_r20 (April Security patch)
kernel: Intermediate security fix of march added
Quick Settings: add Caffeine (thanks @millosr)
ROM Updater: fix a permission issue (thanks @millosr)
b08
android 6.0.1_r17 (March Security patch)
Hw Keys: launch Camera application with Camera key can be configured to Disabled, Long press only or default
Battery: 1910mah
Translation: update pt/pt-rBR @ThunderBolt_BR)
b07
New partition layout with /data and /sdcard merged. please read the flashing procedure.
kernel: Wake Gesture support (double tap, sweep). Touchscreen power managed by proximity sensor when screen off
kernel: governor SMARTMAX by default. OC supported.
Selinux: Fully supported and Enforced
TWRP: (3.0.0 on Android 6) with Support of new partition layout and encryption footer length. /data/media will be preserved and used for backup/restore (recovery.img on the OTA zip file)
TWRP: Add Crypto, Battery status and FOTA backup/restore/install support
WakeUp: Permit to control wake gesture (Settings/nAOSProm/WakeUp)
ViPER4Android: Sound FX managed by ViPER4Android version 2.4.0.1
Email: Patched to bypass Exchange Security Policy (No Pin code etc)
Browser, Music and Gallery2: AOSP version replaced by CyanogenMod version
Dialer: Materialized Icon added
Quick Search: Removed. Be free to use another application like Google Search provided with GApps
GApps: Patch to avoid force close due to permissions (you need to flash the ROM + OpenGapps in one shot and to reboot directly after that)
Double Tap to Sleep on the status bar
Minfree setting supported
Volume Keys can control track (next/previous/stop) when screen off and music is playing
Doze: Support adaptive brightness (Ambient Display)
Notification during Doze: Invert color for dark theme supported (avoid a black text on black background)
Menu/Home Keys: By default press Menu will launch App switcher and long press on Menu will trigger Menu. Long press on Home will launch Search Engine. This is the modern layout but you can use the old one too
Power Key: Include Reboot menu (Normal, Soft, Recovery and Bootloader)
Hw Keys: Use Camera button to launch Camera Application (Short press if screen is off and long press if screen is on)
Quick Setting: Can be pull down directly with one finger on the 1/3 right of the Status bar
Quick Settings: Add Fast Charge, Lockscreen, ADB wifi, Day/Night tiles
Recent Applications : Close all applications button on the right bottom
Settings: nAOSProm section that permit you to configure the ROM, to start WakeUp, Layers Manager, Superuser and SuperSU if available.
Settings: Color Calibration improved to support Night and Day settings. Presets are now available.
Settings: Add About nAOSProm
NavBar: On-screen keys can be enabled/disabled from Settings/nAOSProm/More
Developer mode and Tuner UI enabled by default
Superuser integration
Battery: Menu include the Fast Charge option (Fast charge will be always disabled after a reboot)
KSM: Kernel Same-page merging disabled by default. (See Settings/nAOSProm)
Signature Spoofing: Permit an application to fake his signature mainly for Microg/NoGapps (disable by default)
Adaptive Brightness: Speed up transition when you go to a brighter environment (~1.5s).
Busybox include
NFC: supported
USB OTG support (thanks @Phantasm4489)
GSM: 2G/3G switch fixed
Xposed : Supported with Selinux enforcing
Auto Power Mode : Doze and applications standby enabled by default (see Settings/nAOSProm)
Localisation: support GPS/Wifi/GSM fix with Google GMS
init rc: complete rework of init process to simplify it (remove some scripts and unused services)
Bluetooth 3.0 Headset: Seems to support HFP and A2DP profiles (thanks to report with your model)
Google Now on Tap : Support with Long press on Home
OTA: support with ROM Updater (see Settings/About phone/Updates)
OTA: Recovery: OTA will automatically flash recovery.img into FOTA
OTA: Layers: OTA will preserve theme files when flashing a new ROM
SuperSU: force system installation with the new stable version 2.65 (/system/.supersu). Can be overrided by /data/.supersu
Fix offline charging
Fix FM Radio and Bluetooth crash when FMRadio is closed without headphone.
Fix DeskClock crash when trying to view world cities
Translation: en, fr, es (@vayavalla), pt-rBR @ThunderBolt_BR), uk @Jurn_Software), it @nicofossa), pl @A6ekAK), sr @millosr)). Thanks Guys for your help
Partition Layout: /data and /sdcard merged. F2FS is the only filesystem supported for /cache and /data now
nAOSP 5.1 Lollipop Changelog (features, issues, etc)
b29
New partition layout with /data and /sdcard merged. please read the flashing procedure.
see 6.0 b07 changelog that is pretty similar for b29 (except specific Android 6 stuffs and some features like lockscreen/ADB wifi tiles on Quick Settings)
Download
Release available under :
https://www.androidfilehost.com/?w=files&flid=51010
Overclocking
Overclocked kernel are tested on my own device BUT I won't be responsible for any damages on yours
Please don't enable mpdecision on OC kernel.
By default the ROM will use stock frequencies.
Thermanager
By default if the device is too hot it will reduce the screen brightness and CPU clock. When the device will be cool enough it will restore brightness and CPU clock but at 1.5Ghz only.
If you want to force thermanager to restore the clock to a specific value defined by an external overclocking tool, you can edit /system/etc/thermanager.xml.
See http://forum.xda-developers.com/showpost.php?p=62419397&postcount=2465
ViPER4Android
All credits go to ViPER520 and the amazing works.
You should read detail and go to thanks developers.
xda : http://forum.xda-developers.com/showthread.php?t=2191223
website: http://vipersaudio.com/blog/?page_id=31
Layers
Themes are supported with Layers Manager.
This is not a CM Theme Engine so you can just use Layers themes.
Howto flash
About Adoptable storage on Android 6:
You are free to use portable or adoptable option for your external sdcard. Don't forget that if you answer "Adoptable", the external sdcard will be FORMATTED and will NOT be usable on an other devices. If you want the classical behavior, you will need to select "Portable"
6.0 and 5.1 procedure
Translation help
6.0 translation files
Source
nAOSP 5.1
nAOSP 6.0
Release
Kernel: 3.4.0
Android: 5.1.1 and 6.0.1
Thanks
- billchen1977
- ViPER4Android Team
- Cyanogenmod Team
- FXP Team
- TWRP Team
- All the community around Android
FAQ

My current screenshoots.

be stuck in the sony interface when start up the mobilephone.
How to do？

netants said:
be stuck in the sony interface when start up the mobilephone.
How to do？
Click to expand...
Click to collapse
Have you repartition the phone yet ?

USB OTG is not working

what bugs in this rom plz ?

tested by me
Mahmoud Halem said:
what bugs in this rom plz ?
Click to expand...
Click to collapse
i guess everything is normal until now.. i have just tested this rom today.. you can see some of my screenshots from acro S..

Mahmoud Halem said:
what bugs in this rom plz ?
Click to expand...
Click to collapse
Everything OK, I try to check USB OTG - it doesn't work on my phone, but I don't know whether this feature really work on other ROM

thank you very much this is what i waiting for.. this works fine on my acro S... here I shared some of screenshots from my phone on google link.. keep developing.. hehe
:good: :good: :good: :good: :good:
goo*gl/photos/fZQvPiepMnF8mRgg6 (replace * with . )

thank you very much this is what i waiting for.. this works fine on my acro S... here I shared some of screenshots from my phone.. keep developing.. hehe
:good: :good: :good: :good: :good: :good:

Hello, this Custom ROM is stable or in Beta?
It is Official or Unofficial?
Thank you for your job!

soulpower11 said:
USB OTG is not working
Click to expand...
Click to collapse
vsergeyev said:
Everything OK, I try to check USB OTG - it doesn't work on my phone, but I don't know whether this feature really work on other ROM
Click to expand...
Click to collapse
Yes USB OTG is working on Xperia S nAOSP rom.
The issue should be on my fstab for hikari
https://github.com/mickybart/device_sony_nozomi/blob/nAOSP-6.0-hikari/config/fstab.semc
/devices/platform/msm_hsusb_host* auto auto defaults voldmanaged=usb:auto
Can you check if you see /devices/platform/msm_hsusb_host* ? Can you provide a logcat of the issue (logcat, plug an usb device, end logcat)
Thanks

What about warning from BPaul regarding complete acro bricking because of increasing data partition?
http://forum.xda-developers.com/showpost.php?p=61563359&postcount=599
Some users in the thread confirmed that eventually they got their device bricked

mickybart said:
Yes USB OTG is working on Xperia S nAOSP rom.
The issue should be on my fstab for hikari
https://github.com/mickybart/device_sony_nozomi/blob/nAOSP-6.0-hikari/config/fstab.semc
/devices/platform/msm_hsusb_host* auto auto defaults voldmanaged=usb:auto
Can you check if you see /devices/platform/msm_hsusb_host* ? Can you provide a logcat of the issue (logcat, plug an usb device, end logcat)
Thanks
Click to expand...
Click to collapse
dmesg - http://pastebin.com/v15k5P7T
logcat - http://pastebin.com/DTHZTTHi
And theres msm_hsub_host.0 and msm_hsusb

Mmmm that's good .. so can someone explain slowly how to install it .. bcuz i don't know anything about repartitioning ..
And can i go back to stock based roms or must take a full backup by twrp before install this rom ?

I love you man❤?
Thanks you've just made my day
I'll be delighted if you fix the otg

Hello, this Custom ROM is stable or in Beta?
It is Official or Unofficial?

Great ROM so far! Obviously Better than AOSP!
Repartitioning wasn't that hard as expected. Just took 3 mins, and it was done!

hitman-xda said:
Great ROM so far! Obviously Better than AOSP!
Repartitioning wasn't that hard as expected. Just took 3 mins, and it was done!
Click to expand...
Click to collapse
Hi hitman, I wonder whether this new ROM consume more memory than AOSP since it stuffed many things inside. Thanks.
I used to have problems with 3G BPaul's AOSP: it will not be connected until I tap on the profile manually while it is chosen by default.

hitman-xda said:
Great ROM so far! Obviously Better than AOSP!
Repartitioning wasn't that hard as expected. Just took 3 mins, and it was done!
Click to expand...
Click to collapse
Hitman please elaborate on the repartio
nting technic

[JDCTeam][6.0.1][25 March][EOL]Optimized LineageOS 13.0 Builds

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optimized Lineage 13.0 for the Samsung Galaxy S4 (Qualcomm variants)
Brought to you by the Jflte DevConnection Team
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
JDCTeam
Diego Monaco - @alucard_24
Dimitris Katikaridis - @side
Franck Rohée - @franzyroy
Ray Daley - @gadget!
Jim Silverlock - @Jimsilver73
Marco Zanin - @-+BB+-
Matthew Booth - @MattBooth
Mattia D'Alleva - @AntaresOne
Mike Atkins - @FernBch
Oliver - @angelcalibur
Paul Harris - @hawkerpaul
Paul Keith - @javelinanddart
Simeon Ivanov - @smstiv
Stefano Meroni - @smeroni68
Yannis Menexes - @SkL*
FEATURES
Faster than a rocket!
Based on Lineage 13 - Android 6 Marshmallow
F2FS support
Improved speed, stability, RAM usage & battery drain
LEDify by JDCTeam - choose your favorite notification LED pattern at device's boot!
Toolbox by JDCTeam - the all-in-one device manager
Powered by Alucard kernel
All Galaxy S4 variants with Qualcomm Snapdragon 600 are supported:
GT-I9505
GT-I9505G
GT-I9507
GT-I9508
SCH-I545
SCH-R970
SGH-I337
SGH-M919
SPH-L720
SGH-S970G
SM-S975L
Many, many more! Install and see yourself!
GT-I9515 is not supported (slighty different hardware)
GT-I9500 is not supported (completely different hardware)
AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL bootloader.
VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK bootloader.
Do 'getprop ro.bootloader' in Terminal Emulator or through ADB shell to find out which bootloader you have.
DOWNLOAD
Optimized-Lineage-13.0 at AndroidFileHost: [HERE]
Old CM Archive: [HERE]
Official TWRP Recovery v3.0.2-0 for 'jfltexx' with F2FS Support: [HERE]
INSTALLATION
If you are coming from any previous Optimized Lineage 13.0 build or any other ROM, please do a clean install!
FULL WIPE (with external microsd card)
= Move any files you want to keep to your External MicroSD Card - OR YOU WILL LOSE THEM.
= DOWNLOAD your Optimized Lineage Rom and GApps Package
= Move your Optimized Lineage Rom and GApps Package to the external microsd storage
= Boot into Recovery Mode (HOLD Volume UP, Home, and Power button for 1 second after the vibrate)
= Wipe > Advanced Wipe
= Select ON (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache.
= SWIPE to Wipe at bottom of screen
= Back to MAIN START SCREEN
= Wipe > Format Data
= Type ‘YES’ and press blue checkmark at the bottom-right corner
= Back to MAIN START SCREEN
= INSTALL to install Rom and GApps
= AFTER you have finished installing the Rom and GApps > WIPE CACHE/DALVIK > SWIPE to Wipe
= REBOOT SYSTEM
FULL WIPE (without external microsd card with NO Home PC access)
= Move any files you want to keep to a safe folder - OR YOU MAY LOSE THEM.
= DOWNLOAD your Optimized Lineage Rom and GApps Package and place in Any Folder
= Boot into Recovery Mode (HOLD Volume UP, Home, and Power button for 1 second after the vibrate)
= Wipe > Advanced Wipe
= Select ON (enable tick) for Dalvik / Art Cache, System, Data, Cache
= SWIPE to Wipe at bottom of screen
= Back to MAIN START SCREEN
= Wipe > Format Data
= Type ‘YES’ and press blue checkmark at the bottom-right corner
= Back to MAIN START SCREEN
= INSTALL to install Rom and GApps
= AFTER you have finished installing the Rom and GApps > WIPE CACHE/DALVIK > SWIPE to Wipe
= REBOOT SYSTEM.
FULL WIPE (without external microsd card with Home PC access)
= Move any files you want to keep to your Home PC - OR YOU WILL LOSE THEM.
= DOWNLOAD your Optimized Lineage Rom and GApps Package to the Home PC
= Boot into Recovery Mode (HOLD Volume UP, Home, and Power button for 1 second after the vibrate)
= Wipe > Advanced Wipe
= Select ON (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache.
= SWIPE to Wipe at bottom of screen
= Back to MAIN START SCREEN
= Wipe > Format Data
= Type ‘YES’ and press blue checkmark at the bottom-right corner
= Back to MAIN START SCREEN.
= Copy Rom and GApps to your Internal Storage (create a new folder) using the downloaded files from the Home PC
= INSTALL to install Rom and GApps
= AFTER you have finished installing the Rom and GApps > WIPE CACHE/DALVIK > SWIPE to Wipe
= REBOOT SYSTEM
= Once first boot is completed you can safely move your files back onto your Internal Storage
NOTICE: First boot after an install/update takes a while, wait at least 5 minutes for it to boot.
If the LED stops flashing and goes solid with any color then SuperSU did not correctly trigger the reboot.. You can either pull the battery -OR- hold down the power button for 15 seconds till the screen goes blank, then let go of the power button.. Then after another 4 seconds it will automatically boot and vibrate and everything is 100% normal.. It only happens that one time on a new Rom install with SuperSU.
SOURCES
Available on:
JDCTeam GitHub
CREDITS
Side - Lead developer
JDCTeam
LineageOS
OpenGApps
SPECIAL THANKS
Optimized-Lineage-13.0 Test Team
Donators
AndroidFileHost
All of you!
XDA:DevDB Information
Android 6.0.1 | Optimized LineageOS 13.0 builds, ROM for the Samsung Galaxy S4
Contributors
side, creeper36, smeroni68, alucard_24, -+BB+-, MattBooth, hawkerpaul, angelcalibur, Jimsilver73, javelinanddart, franzyroy,SkL*, smstiv, FernBch
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Current Stable Version: 4
Created 2016-03-11
Last Updated 2018-05-18

Some notes of installation by @Creeper36
Creeper36 said:
OPTIMIZED CM13 ROM (Android 6.0.1)
By JDC TEAM using TWRP RECOVERY
I will not be held responsible for you messing up your phone. It worked for me.. It SHOULD work for you.
This does trip your Knox Warranty Bit. This does void your warranty..
*NOTE: The lines marked for Windows 7 is only that single line.. the rest of the instructions are for ANY versions of Windows.
= Windows 7 ONLY: Download to your PC: Samsung KIES3 - found [HERE].
= Download to your PC: ODIN 3 v3.10.7 - found [HERE]
= Download to your PC: TWRP Recovery 3.0.*-jfltexx.img.tar - found [HERE].
= Download to your Phones External MicroSD Card: Optimized CM13.0 ROM - found [HERE].
= Download to your Phones External MicroSD Card: Open GApps 6.0 - found [HERE]- (Look for "open_gapps-arm-6.0-pico-[DATE].zip")
= Power ON your phone and boot into the normal system.
= CHARGE YOUR PHONE TO AT LEAST 80%.. if your battery runs out while your flashing or loading you will be in trouble!!
= Windows 7 ONLY: Install KIES3 on your PC -- You must install KIES3 in order to install the Samsung phone drivers -- You do not actually need to use it. (Windows 8/8.1/10 does this automatically on the next step).
= Win 7/8/8.1/10: Plug your phone into your PC via USB cable.. WAIT for your PC to finish installing drivers.
= TRANSFER all the needed files to your phone now.. put the files in a 'ROM' folder on your External MicroSD Card.
= Unplug your phone from your PC.
= Power OFF your phone.
= Boot your phone into DOWNLOAD MODE (While Powered OFF - HOLD Power, Home, and Volume DOWN buttons for 6 secs, let go as soon as the screen changes).. then press the Vol UP button.
= Run ODIN3-v3.10.7 on your PC -- use "Run as Administrator".
= Plug in your phone (phone is still in Download Mode) via USB cable to your PC.
= In ODIN3: Make sure you see "COM #" and "ADDED!!" -- SEE HELP IMAGE HERE
* If you Do NOT see the 'COM#' and 'ADDED!!' then Samsung Drivers is Installed INCORRECTLY!
* If you DO see the 'COM#' and 'ADDED!!' then you Can Continue Below to the Next Step.
= Insert the 'twrp-3.0.*-jfltexx.img.tar' file in "AP" - Click START -- SEE HELP IMAGE HERE
= Wait for your phone to reboot into system.
= You can unplug your USB cable now.
= Power OFF your phone.
* Your custom recovery is now successfully installed!
= Boot into TWRP Recovery (While Powered OFF - HOLD Power, Home, and Volume UP buttons for 6 secs).. Let go of the buttons after the vibrate but just before you see the small blue writing appear at the top.. I was holding mine down for too long and it would just boot like normal and not recovery mode.
= MAKE A CURRENT BACKUP: Tap 'Select Storage' near the bottom > Select "Micro SDCard" > then "OK"
= Backup: Tick (enable): EFS Only > Swipe to Backup -- Hint: Change the filename from 'Auto-Generate' to 'EFS-ONLY'
* Note: You should only backup EFS by itself.. You only need to backup EFS one (1) time ever.
= Backup: Tick (enable): Boot, System, Data > Swipe to Backup -- Hint: You may change the filename from 'Auto-Generate' but its optional.
= Go back to Main Menu
= 'WIPE' > 'ADVANCED WIPE' > Tick (enable): Dalvik/ART Cache, Cache, Data, Internal Storage, and System.
= 'SWIPE TO WIPE'
= Go back one menu then 'FORMAT DATA' - type 'YES' and press blue checkmark.
= Go back to Main Menu
= Install Optimized CM13 ROM by Clicking 'INSTALL' > Find your Optimized CM13 ROM you downloaded. --> 'Select Storage' (near the bottom) > 'Micro SDCard' > 'OK'.
= Install Open GApps by Clicking 'ADD MORE ZIPS' > Find your Open GApps you downloaded.
= 'SWIPE to Confirm Flash'.
= Wait for completion.
= 'Wipe Cache and Dalvik'.
= 'REBOOT' into system.
* Your System is now successfully Installed!
* After your initial setup you need to tweak a few things:
= Settings > Location > Change to 'Device Only'.
= Settings > Location > 3-Dots > Scanning > DISABLE (untick) Wifi Scanning and Bluetooth Scanning.
= Pull-Down Notification Panel > GPS (Device Only) changed to disabled.
= App Drawer > Google > 3-Lines > Settings > Now Cards > Turn OFF
= App Drawer > Google > 3-Lines > Settings > Voice > OK GOOGLE Detection > Turn OFF
* You should setup SuperSU first thing.
= Go to Settings > Optimized CM Settings > Developer Options > Root Access > Turn ON (enable) 'APPS and ADB'.
= Install SuperSU by Chainfire from the Play Store and Update Binaries. (See SuperSU notes below)
= Enjoy!
* SuperSU Notes: A basic Superuser is pre-installed with this Rom (called 'Privacy Guard)'. It does Not give you any control. You will be able to use the traditional SuperSU from the Play Store (updating the SuperSU binaries will be Successful). After you have updated the binaries it will work great with our phones. SuperSU Pro Key can be installed from the Play Store. BUSYBOX SHOULD NOT BE INSTALLED. ITS ALREADY PRE-BUILT INTO THIS ROM.
When Privacy Guard prompts you in SuperSU for access, click 'Remember my choice' and hit 'ALLOW'.
You will never be prompted like this again. SuperSU will now take over control.
* IF YOU HAVE ANY PROBLEMS WITH MOBILE DATA, PHONE CALLS, OR TEXT MESSAGES ALWAYS CHECK YOUR APN SETTINGS! *
.
.
Click to expand...
Click to collapse
Before report an overheat/sim/cellular issues
Always update your baseband to the latest one selecting from this thread
Rom builds here
Changelog
md5 aroma:81670b48f5962998077de299cc6a0c67
md5 non aroma:1b15638905e943fd5eab089886457803
Update stock kernel to 25-March-2018
Upstream merge until 25-March-2018
Spectrum support
Ramdisk and kernel updates
Update to r81
Hack the Nougat kernel into Marshmallow
Security patches
Final wallpaper
Device tree edits on odex speedup
Mark as EOL
Update Snap camera
This ROM contains ViPER4Arise by @A.R.I.S.E. Sound Systems
Source: Here
Old changelogs:
changelog:
Aroma md5:d4d5b489358b3b9293ea85f316dabbc8
Non-Aroma md5:5e94b00b1ebe186c2a344d1f8b457f77
Update stock kernel to 15-August-2017
Upstream merge until 15-August-2017
Ramdisk and kernel updates
August wallpaper
Android revision 79
Updated SuperSU to 2.79 (There was some problems with 2.82)
Android art to O3
Update snap camera
Update kernel adiutor
core:Support microG Gapps
system.prop:set ro.build.shutdown_timeout=3
bacon:hack to make Youtube 4k videos work
try allow GMS saving
Pump dex2oat operation
system.prop:Add dex2oat limits
CameraWrapper:Increase camera open retries
jflteRIL: bring back handleNitzTimeReceived
jf: overlay:Record panorama with lower res to make it faster
jf: doze after screen is off
overlay: SnapdragonCamera: Reduce frame size of panorama pictures
system.prop: touch.pressure.scale=2
mixer_paths: reduce speaker volume from 88 to 80
bt:Enable BTM_WBS_INCLUDED flag
20170211
MD5 side - bfad49ba1d021354d9f5fc39485f7437
MD5 AROMA - 9b6905a95c78b4d3f93c9e416d166393
Update stock kernel to 10-Feb-2016
Upstream merge until 10-Feb-2016
Ramdisk and kernel updates
Februarys wallpaper
Android revision 78
Updated SuperSU to 2.79 SR3
From CM to LineageOS
Update Snap camera
Disable LiveDisplay by default
Allow some BT profiles
Enable quick power on
Set delay of ringing while calling to 0
Disable cpp duplication (affects camera)
Enable all cores on installing apps
*NOTICE: I am removing the continued references to STABLE # ....
We all know its stable now.. We will just be using build dates.
.
20161225
MD5 - c4d29e21ce5fe252374dc2621f1a4b9d
Update stock kernel to 24-dec-2016
Upstream merge until 24-dec-2016
Ramdisk and kernel updates
Decembers wallpaper
Fix SELinux switch at STweaks
Updated BusyBox
Updated Snap Camera
Correctly replace STweaks profiles on dirty flash
increase sms limit
update to r74
Remove Gello.If you fresh install choose whatever you want in aroma
20161125
MD5 - 1b86e791a0d4d4ecb5831b18373abffd
Update stock kernel to Nov-25-2016
Upstream merge until Nov-25-2016
Ramdisk and kernel updates
Clouds wallpaper
System partition will be wiped on every installation.
That provides dirty installation capability
Add LTE QS Tile
Fix battery icon color while using battery saver mode
Add option to remove browser
Add option to remove OptCM QS Themes
Add option to remove Eleven
Major Camera edits I will need your feedback!
Also clean
/sdcard/Android
/sdcard/DCIM/.thumbnails
/sdcard/LOST.DIR
when installing the rom
Edit initialized Home Screen
PLEASE MAKE A FULL WIPE SINCE ITS THE FINAL VERSION.
KEEP IN MIND THAT WIPE OPTIONS ARE NOT IN INCLUDED IN AROMA.
YOU HAVE TO WIPE FROM TWRP BEFORE RUN AROMA
20161025-Aroma-Stable5-FinalSide
This ROM is named "FinalSide" because its MY final dev on this rom.maybe one day someone of my people
want to maintain it and release a new update!Of course i will also test that before release.
Do you think you can maintain it?Drop me a message.i got something to tell you
MD5 - c86e1af2ac9da036770797dd41cf4050
Many changes on kernel
Many changes on Ramdisk
Edits on sound (affects voip and calls)
Changed wallpaper/bootanimation
Updated stock kernel to aroma
qmuxd edits
Edits on sound that affects gaming sound
Remove some Aroma Root apps
STweaks now works with systemless root
Update SuperSU to v2.78 SR1
Replace viper4android with viper4arise
Busybox will be installed if you select viper4arise
Speaker Optimization (Broken Ringtone,Notification tone,etc.)
Camera edits(Seems stabler)
User can select kernel editor via Aroma
Huge updates on audio HAL sources
Remove Wipe options from aroma(You have to wipe from TWRP,BEFORE zip installation)
Upstream merge until 1022 date
Returned to Alucard governor since its stable now
Completely removed Snap camera
20161105
MD5 - fd05afe6d3bf16c5b579c393e7db8993
Update Stock kernel to 02-nov-2016
Upstream merge from 02-nov-2016
Edits on STweaks profiles
Ramdisk changes
Aroma: fix SuperSU installation
20160920-Aroma-Stable4
MD5 - b01a8c917eaa605e67a85cf901e04990
-Bring live wallpapers back
-Fix SIM issue for some cdma variants
-Upstream merge until 2016-20-09
-Ramdisk updates/edits
-Fix dexopt welcome fonts
-Updated kernel
-Update stock kernel to the latest one
-UI speed boost
-Edits on sound(Distortion and stability)
-qmuxd edits
-Fix Viper4android installation(requires your OWN busybox from playstore!)
-Reworked camera(still crashes)
-Update to r66 android revision
-Remove google play killer
-Airplane mode - sim card issue fixed by CM upstream
-Rdit recents menu(add tweaks to optcm settings section)
-Add some android N notifications flavor
-Changed wallpaper again (3D mandelbrot)
-Force fast charge by default
-Use darkness as default governor(That means better sleep and UI transitions)
-Make STweaks to work with systemless superSU
-Workaround on CDMA variants(Read here
for details)
------------aroma edits------------
-Edit the license.
-Speedup the boot of aroma
20160902-Aroma-Stable3
READ THIS TOO ,PLEASE
MD5 - 24c8500b28fceb4cbed4c0969311bf06
Bring OptCM QS themes back
Updated manifest
Upstream merge since 0831
Updated kernel to latest Linux changes and general fixes
Kernel now got CRON services(Check out the CRON tab at STweaks)
Updated toolchains
Ramdisk updates and changes
Updated webview
Busybox:Change the way we handle it
GPS doesnt affect cpu/battery/heat as before
Edited dexopt screen while booting
Changed wallpaper...again
Back to old camera version as default
Build CLANG with -O3 flag[testing]
Reduce CPU frequency while on call
Prevent a logcat spam caused by a wifi event
Add an EXPERIMENTAL feature about Google Service drain(See OTHER Stweaks tab)
QMUXD edits(Affects gps connecting speed,maybe battery too)
Removed some ugly wallpapers
General fixes and define some default-enabled values from Settings apk
New Gallery app
AROMA updates
Updated stock kernel
Remove launcher selection
Add option to remove STweaks(HIGHLY NOT RECOMMENDED THOUGH)
Add a warning message before return to recovery about gapps and SU
Option to add both aosp and snap camera
Add aroma option for SuperSU
20160806-Aroma-Stable2
MD5 - 15fec0a3b23d6a29079a42853c8f816d
-AROMA installer with advanced wipe options and JDCTeam theme(Thanks to @Kushan02 for helping me sort some things out)
-Allow dirty installations
-Increase VoIP app's mic volume
-Back to 0.75 transitions
-ROM is now odexed
-Clean on 'About Phone' Section
-Add test team as contributors
-Change boost time according to CAF
-Kernel general fixes
-Ramdisk general fixes
-Fix STweaks typo
-upstream merge until 20160806
-Truly fix lockscreen wallpaper
-Update graphic drivers and blobs
-Update to R61 Android
20160717-Stable1
MD5 - fa644ff8048acc1402db22983deccc41
-updated kernel
-Remove some unused props from jfcommon and add new ones
-MMS while no data enabled
-Final Audio/BT edits
-Fix the STweaks typo
-Edits on packages/apps/Bluetooth
-upstream merge
-fix a FC when Settings/lockscreen/2nd wallpaper changer selected
-KERNEL:allow reconnect wifi
-Updated RAMDISK
-Smoother UI
Rom builds here
20160629-snapshot3
MD5 - 694a940401f17958daaa9cd4f6f7d22c
Use gello
restore ledify
upstream
wallpaper-summer mood
s7 clicks/lock
duration to music app
voip volume
bt edits from CM upstream
fully updated kernel
Latest ramdisk
Fix WGET ad block issue
return dev options to stock location
edits on bt/audio again
F2FS is back
webview from CM
Remove the orange borders while battery saver mode is enabled
2 sound patches.Use them as you like.Read below
Suggested Gapps
PS
Always remember the google now bug with BT...Make your tests and check which package is comfortable for you.
a good solution is to disable Google Now Card and OK Google
20160618-snapshot2
MD5 - 579fc63b59f2b3a7ab13b429233fe0e6
ROMHUT is under construction again
Download here
If you use BT we suggest you to NOT use google search app!
So ,use pico opengapps
If you dont use bt,use whatever u want
more bt fixes
back to Eleven app
kernel changes for performance and no heat
Ramdisk updates
fixed wakelocks
CM upstream
20160614-snapshot1
MD5 - 591436f70b13517d0950a32e72f6949c
Updated Bluetooth sources / audio
Upstream merge (Android R46)
Rotation fix
Remove logcat spam
PS
Snapshot doesnt mean stable !
Snapshot is an important build that i mark it like this to show us that from this build and on new ones,we got mayor stability changes.
its just a flag to mark ,a new stage of build process
20160606
MD5 - a2e0afb4707ea0318661479bdc967551
Download here
Google drive due to romhut issues
upstream
kernel changes
ramdisk changes
sound and BT edits
rocket player instead of stock one
double tap to lockscreen = sleep
super su icon at status bar can be hidden
adb enabled(for better battery saving,please turn it of via STweaks)
20160525
MD5 - 39572e9b32b25a263ef3aa1b72105682
upstream
back button kill time reduced
updated device tree (affects RIL)
bt edits (seems like works 101% perfect with poweramp.CM app still buggy)
VoIP edits
gello app
battery bar tweak
membar at recents menu
changed temperature unit
caf ril and sound sources.Cleaner sounds on stream
20160510
MD5 - 4a535f97d9a4557864631dee5b4b83cc
Fast unlock if lockscreen's password is correct
Ability to change wallpaper of lockscreen
Added some QS themes.
These are preinstalled.Just go to Themes and enable them.it only affects QS and volume panel!
Small UI animation push
Added Samsung's stock sounds for notifications and alarms.You can freely choose them from options
Remastered and compressed the stock sounds.Made them louder and cleaner
Upstream merge to android r43
Critical fix on kernel & Stweaks
ZRAM updates
Some device tree edits/tests.Report me about BT
Ramdisk updates
Unknown source apps:Enabled by default
20160429
MD5 - 70535a842235be8a30ab2d69b81338c3
CM Upstream merge and sync
Contains fixes for:
Dialer/Phone stability
Some BT Fixes
Settings crashes
GAPPS related issue.Please also read post #2
Kernel updates
Ramdisk updates
Hotness seems to be disappeared
20160419
MD5 - 6778f6ea80b7d30f53e0211c0ee0150c
android N wallpaper
introducing Optimized CM Settings
updated device tree from aosp
updated kernel+ramdisk
upstream merge
switch to linaro toolchain
edited bootanimation(simpler/smoother)
moved dev options to Optimized CM Settings(always enabled),Fast Data enable tweak,Network traffic status bar
dev tools = disabled
20160329
MD5 - ba20b00d512de37a4b037b98fec21dc2
RIL fixes (CDMA issue with SIM is dissappeared.Change network type is possible)
Overall performance (kernel updates-Ramdisk updates)
Archi's Optimizations
New Bootanimation
Removed OTAupdates app for now
Added OptimizedCM12.1's BSOD killer
Merge with CM upsteam
20160312
MD5 - 75252dd20f3243775b3e84ee2f0a0e57
Canadian/US Carrier fix (com.android.phone crash).
Merge with CyanogenMod upstream.
Merge with latest alucard kernel.
20160311
MD5 - e3f678d68c2497bed6d9b89c4fb78a00
Initial release
Changes of upstream merge can be found https://www.cmxlog.com/13/jfltexx/

Thank you @AntaresOne for this great ROM and for every development you have done for our device!
Video preview by shark jungle.thanks mate!
HERE

Tricks and Tips of this ROM
STweaks shows "no kernel support", what to do? Go in Developer options and enable root.
ADB logcat is disabled by default.Run STweaks,go to OTHER tab and enable it
If you issue microphone volume problems-> Look here
Get the benefits of F2FS(Speed!)
Using F2FS
What it is? Wikipedia
To use it you should first convert your EXT4 partitions through recovery, before installing this ROM.
On TWRP:
Download and install TWRP from post #1
Wipe->advanced wipe
Select cache->change or repair file system->f2fs
Select data->change or repair file system->f2fs (Warning: internal storage is formatted, make a backup of your personal data before doing this!)
About Logs/LogCat
Logcat is disabled by default.
Why?
Less battery consumption
Less CPU Load
How to enable it:
Run STweaks
Swipe to right side/menu and reach the one called "OTHER"
Enable logcat from there
Reboot to make it happen
About GAPPS
sjamie said:
GApps & Google Search Clarification: The test team has determined most GApps packages trigger the dreaded "Unfortunately, Bluetooth Share has stopped" error message (BSE). The problem seems to stem from the bundled Google Search app. If you use OpenGapps (pico) and simply download the Google Search app from the Play Store, you should be error-free and you can use all of Google's features (ie. OK Google, Google Search, Google Now, etc.).
Bottom line: You will have many less problems if you use OpenGapps (pico). It was just discovered that there seems to be a problem with the 6/18 version which may not allow you to download apps from the Play Store resulting in Error DF-DLA-15. To avoid the possibility of getting this error, use an older version of pico gapps like 6/17 which works flawlessly.
Click to expand...
Click to collapse
Οf course if you dont use BT you can freely use Banks Gapps or A-Gapps!
STweaks Corner
My old STweaks profile:
Governor: interactive for all CPUs
min CPU frequency = 1 scale before max.
ZRAM disabled
GPU performance governor.
Antutu benchmark score 40500.Lost 1% of battery after 2 hours of sleep device.No hotness while antutu was running.
i dont care for battery life.
PS.i also use f2fs
My latest STweaks profile to attachments
To install it,paste it to internal storage,select 'default profile' at stweaks if u changed it.
if not,then simply press IMPORT from the most-right menu.Reboot after import just to be sure
@Feedmeeeee 's profile
Battery save Corner
I personally have disabled:
NFC
battery and notification light
Display music visualizer
any kind of gesture
Went to settings/memory/apps started on boot and disabled useless apps i dont need to boot
and disabled KEEP AWAKE too.
locations/settings/bluetooth scanning disabled
locations disabled
backup and reset/disable automatic restore
backup my data disabled
RILJ Work-around
Some infos about RILJ wakelock.
RILJ is the background process that is functioning the phone signal/location etc.if you got drain that maybe means
you got wrong baseband/modem/ril.PLEASE READ CAREFULLY THIS AND USE THE CORRECT ONE
you got a full pack of gapps.if yes,please disable the 'news and weather' app.
the quickly change of signal's strength will always keep rilj busy.
Try some things like:
Use Wakelock Terminator to block the wakelock of RILJ.
and
1. Turn on airplane mode
2. Turn off the phone and pull out the battery for a couple of minutes (~2 minutes)
3. Put the battery on then turn on the phone
4. After it booted, turn off the airplane mode..
About the touch screen bug on SOME devicesFor the minority of users who got issues with touch screen after sleep,please use the stock kernel from nightlies until i will be able to fix it .
Here is how to
About donationsI do accept donations .
My paypal mail is
[email protected]
All donations will be spent to make this ROM better. Even for new parts of build server or a new device other model of s4 for tests

And finally here... Optimized CM 13... from JDC team!!

Good work mate.

Many thanks guys !!!!!

finally it is here !!
we have waited a lot but it deserve it from recognized developers
will try it soon

The download link does not work

LimitsX said:
The download link does not work
Click to expand...
Click to collapse
try again my friend

side said:
try again my friend
Click to expand...
Click to collapse
lol i went to romhut and found the rom . The link works!

Nice! I've waited ages for this, can't wait to flash
Sent from my GT-I9505 using Tapatalk

great!!

Thank so much !!!
Oh woua ! Thanks so much for this work. I install it right now.
Thkssss

Initial impressions:
- Rom is buttery smooth
- No random reboots (so far) which is great because I was plagued with them in the CM13 nightlies
- Snap Camera working great
- No wifi issues so far
- Successfully streamed music via bluetooth
Thank you JDC Team!

Epic. said:
Initial impressions:
- Rom is buttery smooth
- No random reboots (so far) which is great because I was plagued with them in the CM13 nightlies
- Snap Camera working great
- No wifi issues so far
- Successfully streamed music via bluetooth
Thank you JDC Team!
Click to expand...
Click to collapse
thanks for that reply !
You can also check the case-lid while u talk to the phone,its also fixed
Also BT on car is fixed.
Waiting for more replies!

side said:
thanks for that reply !
You can also check the case-lid while u talk to the phone,its also fixed
Also BT on car is fixed.
Waiting for more replies!
Click to expand...
Click to collapse
What about gaming performance and battery life in this rom??
Envoyé de mon GT-I9505 en utilisant Tapatalk

MLDamazigh said:
What about gaming performance and battery life in this rom??
Envoyé de mon GT-I9505 en utilisant Tapatalk
Click to expand...
Click to collapse
Gaming performance can be changed.Kernel is so flexible through STweaks app ,so i believe u wont have issue on it
Personally when i want play games,i use the Performance profile of STweaks ....
battery life ?
I would answer the same.According to what u do u can use the STweaks profile.
i use extreme battery profile and i got epic battery life + normal performance for daily use.

Ok thanks for your reply, i will flash it tomorrow
Envoyé de mon GT-I9505 en utilisant Tapatalk

Just installed the rom! It looks good so far except one issue. I have no Data =\. I can't even change from LTE to 3G to 2G at all. Actually there are no APN available for my carrier lol. im gonna manually add them and see how it goes.
I have I337M model and i am using 5.0.1 OH1 modem and bootloader.
So I manually added the LTE apn. Rebooted my phone and then i got following:
"android.phone" crashed. I opened settings and it took 30 seconds to load. Also, now it says there is no sim card inserted when there is =\. This happened after I entered APN settings manually.

[ROM][N 7.1.2] [ KatKiss - Nougatella #039 ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KatKiss ROM
Nougat 7.1 ReleaseAsus TF300T
Please note that this version is made for and tested on the TF300T model.
This rom is an aosp based rom with my own additions on top of it.
The main motto of the rom being Kiss. Even though the Meerkat could give you a kiss, it stands for Keeps it Sweet and Simple too
Which means that the rom's main goal is efficiency, speed/responsiveness,
while not adding bloated features that will slow things down

DOWNLOADS:
TF300T Latest Rom Version: KatKiss-7.1_TF300T_039.zip | Mirror
Gapps: OpenGapps ARM 7.1 Pico
Latest SuperSU: SuperSU stable
Sound improvements & misc : install the K.A.T App
TF700 & TF201 versions: http://forum.xda-developers.com/transformer-tf700/development/rom-t3457417
TF701 version: https://forum.xda-developers.com/transformer-tf701/orig-development/rom-t3540259
Quick demo video of the current rom: https://youtu.be/bclpP2UJydE
You'll have to excuse the phone quality
it's mostly to show the responsiveness, launch times, switching between apps repeatedly, multi apps, video playing, floating windows and so on, it's not feature exhaustive.
Install Instructions:
Install KANG TWRP Recovery
Backup everything !
Boot into the recovery
The first time or everytime you have an issue when dirty flashing (Especially when changing android versions):
[*] do a full wipe , if you have issues make sure that you format /data (format is different than wipe)
Warning: formatting will remove what is stored in your internal storage, so store the rom /gapps/supersu zips onto an external storage (microSD, SD card..) or make sure you know how to push them back through adb.
Change /data filesystem to f2fs
(wipe => advanced wipe, check /data then "Repair or change filesystem" => change file system => and choose F2FS)
Then everytime (even when "dirty flashing") do the following steps:
Flash the rom
Flash the SuperSU zip
[*]Flash gapps
Wipe cache/dalvik
Reboot
Note that current gapps setup wizard will crash as it is not fully compatible with android 7.1.2 (KatKiss >= 022)
unless you turn on wifi manually after the language selection in the initial setup.
(if you don't have a dock, use the extra wifi button in the navbar)
Rom Main Features:
Native Nougat MultiWindow
High speed and responsive oriented
High performance and overclocked KatKernel included
Built O3 & with High optimization flags
Dock keyboard Support with full special/function keys support
Global Keyboard Shortcuts / KeyOverride Macro association (See post #2 for more info)
HDMI Support
Battery Level Indicator & Dock Battery support + Mods (icon/Text/%)
F2FS, CIFS, ext4, NTFS & Exfat support
Native Android FSTRIM + Manual scripts for Database optimization and fstrim (see post #2)
Media Scanner Filters
System UI editor with Navbar tuner
All Wifi channels support
Integrated cpu & io performance settings panel
Custom Navbars buttons long press actions
User Immersive mode and actions with automode when docked setting
Advanced per application permission management (AppOps)
Ethernet-auto support
Misc utils Busybox, rsync...
Included KatKernel Main Features:
-- Based on latest Asus 10.6.1.27.5 version.
-- CPU Overclockable up to 1700 (1500 default), GPU overclock (OC 520 by default) , uservoltage
-- Built with UberTC GCC 5.4, -O3, graphite + Optimized flags
-- F2FS support
-- governors: interactive pegasusq conservative ondemand powersave performance
-- iosched: BFQV7r5, Zen, ROW, SIO, deadline, NOOP, CFQ
-- FS: ext3-4, VFAT, NTFS, F2FS, NFSV3+4, CIFS
-- TCP Congestion: illinois cubic veno reno bic westwood highspeed htcp vegas scalable yeah
-- Asynchronous Fsync
-- USB NET drivers
-- lowmemorykiller: misc optimisations & fixes
-- backports from more recents kernels (3.4,& 3.9)
-- SLUB
-- exposed SOS/LNX
-- Restrict slave mountspace so Dalvik apps can mount system-wide volumes
-- Misc optimization & fixes: cpufreq, block, mmc, i2c, sched, rcu, arm specific routines, ...
-- Misc security fixes, futex, tty ...
ChangeLog: http://public.timduru.org/Android/KatKiss/7.x/ChangeLog.html
Rom Source: https://github.com/timduru (branch katkiss-7.1)
Kernel Source: https://github.com/timduru/tf300t-katkernel
Credits: Original banner concept by i9apps, Bootanimation by mgeniusm, original drawing by BBF, tetsuo for his contributions, Chainfire for SuperSU, Anthony Restaino for Lightning Browser
WebPage
How to report
What to include in the report
Disclaimer: The usual
Use at your own risk, I won't be responsible for any damages caused to your Transformer or to yourself.
In most cases if something breaks, flashing a rom on top should fix it.

XDA:DevDB Information
KatKiss-Nougatella, ROM for the Asus Transformer TF300T
Contributors
timduru
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: Latest stock bootloader, KANG TWRP
Based On: AOSP
Version Information
Status: Stable
Beta Release Date: 2016-09-02
Created 2016-09-02
Last Updated 2019-09-28

Tips
First Install
Make sure you do a format /data the first time you install the rom
(backup your internal storage first if you want to keep something)
The first boot after a rom flash can take a few minutes as ART is slower than dalvik to optimize the applications, but is faster after the 1st time.
(First boot takes ~4-5 minutes without gapps and 10+ minutes with gapps)
Also keep in mind that after a fresh install, it might take a bit of time to get up to full speed as media scanner & google are checking/scanning and restoring stuff.
Note that app optimizations /cache will now occur in background after being installed, only when :
- your device is idle
- on power and fully charged.
So after install , let your device on the charger for a few hours for it to fully optimize.
System UI Tuner
A few things including the navbar buttons can be tweaked in Settings => System UI Tuner
Hardware keyboard layouts
More languages have been added in the default asusec keyboard
Set the keyboard layout through Settings => Language & Input => Physical Keyboard (asusdec)
(to use multiple layouts , you first need to add another Language in Settings => Language & input)
You can switch between layouts using the keyboard icon that appears in the navbar.
Storage Encryption
Encryption is not supported on our devices
Global Key Override/Shorcut Mecanism
Available in Settings => Dock => Add Key Override Actions
This will allow you not only to redefine function keys assignment, and other special keys actions,
but you'll also be able to assign global macro actions / app launch to any key + Meta key combination (shift Left or Right , ctrl..)
You can also add multiple actions to one key combination, simply click again on the "+" button for the same key combination.
For example if you want to assign to one key combination a list of action to run before going to bed for example, like: turn wifi off, Bluetooth off, mute sound, and turn screen off, you can do that
Note that starting multiple applications with one key is kinda a miss and hit for the moment due to some mecanism in android that seems to prevent applications to start too close to each others.
Bluetooth audio devices
For bluetooth audio devices that have "phone audio" capability you need to uncheck the box in the device's bluetooth settings.
Camera
Video recording is 720p max
Storage (fstrim) and Database optimization:
Fstrim is native since 4.3 and will happen in the background if your tablet is idle / sleeping and that your battery is > 70%
There is also a script to run it manually in the rom: /etc/kat/optimizestorage
To optimize the Database: /etc/kat/optimizedb
To run both, open a terminal and run:
su
/etc/kat/optimize

res
res

Oh man sounds sweet but the link is down.

StaticMaal said:
Oh man sounds sweet but the link is down.
Click to expand...
Click to collapse
that's why it says ****Coming soon**** next to the download links
I need to create the thread first to upload basically, 8 minutes left if xda doesn't fail

First Beta Release #006
New rom version available: KatKiss-7.0_TF300T_006.zip
Let's go !
I've been using Nougat for the past few days and It's pretty much usable as a daily rom already I'd say
Unless you need one of the missing /not working feature of course (See 1st post)
I'll be busy for the weekend, so I thought some might want to play with it too
As usual with a major upgrade: FORMAT /data first
(it'll change it to ext4, then you simply need to change it back to f2fs)
Have fun

Sorry man I thought coming soon was meant for the mirror link.

Wow. This is very impressive, I hope to try this soon

Tim, you are..THE MAN!!!
Sent from my TF300T using XDA-Developers mobile app

Installed and seems to run good! I didn't do extensive testing till now though...
Thank you for the great work you are doing!

@timduru
Did I understand correctly?
My steps when moving from version KatshMallow #029 the following:
Full wipe + format /data to ext4
Convert /data to F2FS
Install new ROM (7.0) + GAPPS + SuperSU

BrateloSlava said:
@timduru
Did I understand correctly?
My steps when moving from version KatshMallow #029 the following:
Full wipe + format /data to ext4
Convert /data to F2FS
Install new ROM (7.0) + GAPPS + SuperSU
Click to expand...
Click to collapse
Yep, that would work
You can skip "full wipe", as data format to ext4 does the same, just more complete

Installed. Running fine.
Sent from my TF300T using Tapatalk

Do I have to format f2fs even though I am already on katshmallow with f2fs?

thorrules said:
Do I have to format f2fs even though I am already on katshmallow with f2fs?
Click to expand...
Click to collapse
Yes, full cleaning internal storage needed.

Do I convert /data to f2fs within kang twrp or adb with a command line?
Sent from my Nexus 5X using XDA-Developers mobile app

tamkhanh said:
Do I convert /data to f2fs within kang twrp or adb with a command line?
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
kang twrp

Will this fantastic ROM become available for the TF201 as my TF300 has just gone Kaput!!

Is there a possibility to install google now launcher?
When installed from the store, I can't get it to run. And flashing the micro or stock gapps, results in the device not booting. And I waited for like 20 minutes. Or was that too short of a waiting time?

[JDCTeam][7.1.2][21 Jan 2019][EOL]Optimized LineageOS 14.1-Version12

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optimized LineageOS 14.1 for the Samsung Galaxy S4 (Qualcomm variants)
Brought to you by the Jflte DevConnection Team
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
JDCTeam
Diego Monaco - @alucard_24
Dimitris Katikaridis - @side
Franck Rohée - @franzyroy
Ray Daley - @gadget!
Jim Silverlock - @Jimsilver73
Marco Zanin - @-+BB+-
Matthew Booth - @MattBooth
Mattia D'Alleva - @AntaresOne
Mike Atkins - @FernBch
Oliver - @angelcalibur
Paul Harris - @hawkerpaul
Paul Keith - @javelinanddart
Simeon Ivanov - @smstiv
Stefano Meroni - @smeroni68
Yannis Menexes - @SkL*
FEATURES
Faster than a rocket!
Based on LineageOS 14.1 - Android 7.1 Nougat
F2FS support
Improved speed, stability, RAM usage & battery drain
LEDify by JDCTeam - choose your favorite notification LED pattern at device's boot!
Toolbox by JDCTeam - the all-in-one device manager
Powered by Alucard kernel
All Galaxy S4 variants with Qualcomm Snapdragon 600 are supported:
GT-I9505
GT-I9505G
GT-I9507
GT-I9508
SCH-I545
SCH-R970
SGH-I337
SGH-M919
SPH-L720
SGH-S970G
SM-S975L
Many, many more! Install and see yourself!
All Variants with a locked bootloader are currently unavailable until the unified tree is further updated.
GT-I9515 is not supported (slighty different hardware)
GT-I9500 is not supported (completely different hardware)
AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL bootloader.
VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK bootloader.
Do 'getprop ro.bootloader' in Terminal Emulator or through ADB shell to find out which bootloader you have.
DOWNLOAD
Optimized-LineageOS-14.1 at AndroidFileHost: [HERE]
Official TWRP Recovery v3.1.0-0 for jfltexx: [HERE]
INSTALLATION
If you are coming from any previous Optimized LineageOS 13/14 version or any other ROM, please do a clean install!
FULL WIPE (with external microsd card)
Move any files you want to keep to your External MicroSD Card – ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the external microsd storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
FULL WIPE (without external microsd card with NO Home PC access)
Move any files you want to keep to a safe folder - ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the internal storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
FULL WIPE (without external microsd card with Home PC access)
Move any files you want to keep to your Home PC - ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the internal storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
Once first boot is completed you can safely move your files back onto your Internal Storage
NOTICE: First boot after an install/update takes a while, wait at least 5 minutes for it to boot.
If the LED stops flashing and goes solid with any color then SuperSU did not correctly trigger the reboot.. You can either pull the battery -OR- hold down the power button for 15 seconds till the led/screen goes blank, then let go of the power button.. Then after another 4 seconds it will automatically boot and vibrate and everything is 100% normal.. It only happens that one time on a new Rom install with SuperSU.-----------------------------------------------------------------------------------------------------------------------------------------------
AROMA-BOOTANIMATION -- By Creeper36
(Does Not Contain the Rom)
This is an Aroma installer if you want to change your BootAnimations.
This is a completely seperate and optional Aroma from the Rom installer.
I created this to give you the option of easily changing your BootAnimations.
Take a look at the Previews below and I will be creating more of these and will continue to update it.
ANIMATION PREVIEWS:
(Note: Quality may be reduced for Preview GIFs.. Final version is flawless)
ZOMBIE
OPT LINEAGE
OREO
PIXEL WHITE
PIXEL BLACK
BIOS
S ENERGY
BLUE STREAKS
HEART
WATCH DOGS
New Aroma-BootAnimations-v.1.0 >> https://www.androidfilehost.com/?w=files&flid=178732
-----------------------------------------------------------------------------------------------------------------------------------------------
SOURCES
Available on:
JDCTeam GitHub
CREDITS
Side - Lead developer
JDCTeam
LineageOS
OpenGApps
SPECIAL THANKS
Optimized-LineageOS-14.1 Test Team
Donators
AndroidFileHost
All of you!
XDA:DevDB Information
Android 7.1.2 | Optimized LineageOS 14.1 builds, ROM for the Samsung Galaxy S4
Contributors
side, creeper36, smeroni68, alucard_24, -+BB+-, MattBooth, hawkerpaul, angelcalibur, Jimsilver73, javelinanddart, franzyroy,SkL*, smstiv, FernBch
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2016-10-13
Last Updated 2019-01-20

Update is out
Version 11
20180320 / (20-Mar-2018)
MD5 for aroma build - a71b6dc9f08064ceb067f7f3363dac3d
MD5 for non-aroma build - c92a40be0de17975999df738e276b948
Changelog
Upstream merge until 19-March-2018
Update stock kernel to 19-March-2018
Updated Alucard kernel and Ramdisk
Reset Alucard kernel to version 8 source
Update security patch to March
BT edits
Google Apps related edit from upstream
Aroma: Do not delete Stock Dialer if Google Dialer is selected
Update magisk
Update mixplorer
Introduce Spectrum implementation
Fix the proximity sensor (That time for real
Resize user data partition to allow crypto work
Update our wallpaper
Update stock kernel
Update aosp and Snap camera
Update our flashables
old changelogs:
Version 10
20171020 / (20-Mar-2018)
Upstream merge until 3-Jan-2018
Update stock kernel to 3-Jan-2018
Updated Alucard kernel and Ramdisk
Minor edits here and there and some clean up
Version 10 wallpaper
Speed up some things around, like animations
Implement SideCore kernel to aroma
Update Stock camera
Update our flashables
Version 9
20171020 / (20-Oct-2017)
MD5 for aroma build - 37e9b19dc975aa5263ed3d47b19d228d
MD5 for non-aroma build - 6b39a9de65cef4395cbb4ce04af4fd64
Upstream merge until 12-Dec-2017
Update stock kernel to 12-Dec-2017
Updated Alucard kernel and Ramdisk
Update to _r36 revision
Minor edits here and there and some clean up
Update mixplorer app
Add runtime themer (Settings->Display->Theme
Version9 wallpaper
propush the dex even more
Add 4G/LTE switch at tweaks section
SystemUI:Set recents taskbar delay to 0
config:Enable lockscreen rotation(Display/Rotation
Version 8
20171020 / (20-Oct-2017)
MD5 for aroma build - ff5bad8283fc608c7f324b15b8bfaffd
MD5 for non-aroma build - 94d11e511f8a3f0abc8054a6af74bbfe
Update stock kernel to 19-Oct-2017
Updated kernel
Fix a known BlueTooth bug
October security patches
Updated ramdisk
Completely resize partitions
Update aroma packages
Stable 8 wallpaper
Update our flashables
Add burnIn option
BT Audio edits from upstream
Add CMSettings package to power_off_alarm_apps
Enable variable button brightness
aroma:Add SamsungOne fonts
aroma:Add Pixel2 Contacts/Dialer/Messages
Please READ THE DESCRIPTION AT AROMA
Version 7b
20170916 / (16/17-September-2017)
MD5 for aroma build - 25c0d82a9cc8d504df0f0b94fe05d1af
MD5 for non-aroma build - 01e4c8e3a7f01efea943e37601c07d93
Upstream merge until 16-Sep-2017
Update stock kernel to 16-Sep-2017
September security patches
Updated Ramdisk
20170906 / (6-September-2017)
MD5 for aroma build - 8873d4ec9ee4a63954ad69dd3fead255
MD5 for non-aroma build - 8245c1281cb0c6146106cbae976b3418
Changelog:
Upstream merge until 6-Sep-2017
Update stock kernel to 6-Sep-2017
Version 7 wallpaper
Updated Alucard kernel
Updated Linaro ToolChain for Alucard
init:Sprint edits from LineageOS
Fix BT audio stream for car sets and headsets
Overlay:Set config_deviceHardwareKeys to 83
Revert "Overlays: capacitive keys: light up only when pressed."
Update Pixel Launcher to rootless 2.1
Allow to ignore presentation indicator of outgoing calls
GPS:Set XTRA version check to AUTO
Update mixplorer.apk 24/08/2017
Revert "system.prop:debug.hwui.use_buffer_age=false"
prop:Boost dex2oat process
Build bionic with O3 flags
Updated webview
20170816 / (16-August-2017)
MD5 for aroma build - dbbe359729941cd5f3b38501b0bec59a
MD5 for non-aroma build - e4c886ff43cfcdecaf548b7c6b0b1ef8
Changelog:
Upstream merge until 15-August-2017
Update stock kernel to 15-August-2017
Stable 6 wallpaper
Update to _r29
PhoneToggler: Update preferred network mode setting
Update Alucard kernel
More Sprint variant edits on signal
Build Alucard with 7.1.1 Linaro TC
device:capacitive keys: light up only when pressed
device:animate screen lights
Doze: Use pure Samsungs app
Pin camera app in memory for faster executions
Allow GMS power saving
Hack to make YouTube 4K videos work
aroma:Update Magisk to 13.3
Enable "Panic Detection" mode
Aroma:Fix an unexpected format on removing option
ramdisk-tweaks/cortexbrain:make script less aggresive
Kernel: Default profile:Enable power_efficiency_workqueue
All profiles:Slightly reduce voltages
default/battery/exbattery profiles:Set maxcoreslimit_sleep=1
APNs:Add freedomLTE
Bluetooth:Fix car audio (?)
Pure CAF Gallery
Update our flashables
More SafetyNet patches
Reduce DEFAULT_MIN_BOOST_FREQ at alucard kernel
debug.hwui.use_buffer_age=false Affects display updates
Fix a Sprint connections property overwrite
Speed up PlayStore installations
Enable GLONASS (?)
Add some stock system prop flags
HDR workaround.Works?i see no difference
Modify 480p profile
20170711 / (11-July-2017)
MD5 for aroma build - dbbe359729941cd5f3b38501b0bec59a
MD5 for non-aroma build - e4c886ff43cfcdecaf548b7c6b0b1ef8
Upstream merge until 9-July-2017
Update stock kernel to 9-July-2017
Update to revision 24
SuperSU to 2.82
Core edits from upstream
Ramdisk edits
art: switch to -O3 completely
Kernel optimized ToolChain edits
default.prop:Enable MTP by default
Update alucard kernel
Custom scrolling values at OptCM Settings
Add more sensitive apns
Remove decay time hack
Update Magisk
Updated wallpaper
CarrierConfig overlay.affects data connections
Even more bt edits
Switch to chromium patched webview
Update aroma packages
Update flashables from optcm settings
bdroid_buildcfg:enable BTM_WBS_INCLUDED
bluetooth:vnd_jf: Do not set SCO_WBS_SAMPLE_RATE
Changelog:
20170605 / (07-June-2017)
MD5 for aroma build - d16bbe2a05a642d1b5b3b4ade3931356
MD5 for non-aroma build - 5137ea26182f651e281c669da8680ca9
Upstream merge until 3-June-2017
Update stock kernel to 3-June-2017
Update to _r17 android 7.1.2
Update builder PC to java9
Remove SDCARDfs again
Fix tethering on some devices
Reenabled logcat-no qmuxd drain
Use S8s sounds (Notifications/UI/ringtones)
Use S8 wallpaper
Remove some ugly sounds from stock
SettingsProvider:Always allow non-play store apps installations
aroma:Split aroma to 2 pieces (Install/Remove sections
proc: Remove additional SafetyNet flags from /proc/cmdline
Allow apps to read statistics from /proc/stat
Big kernel changes affecting sot and heat
Webview:always use the latest beta version
Fixes on pegasusq and hyper governors
Support two themes for aroma
Back to default bootanimation
Back to 450mhz max gpu-less heat
Revert some audio flags
Enable wifi on first boot
Remove old IR driver
Set freeze timeout to 2 seconds
Debouncing of the light sensor
Disable Dreams by default
Double tap to lock screen to sleep option
Enable power save config for system apps too.Select your apps
Updates on Substratum core
20170507 / (07-May-2017)
MD5 for aroma build - 0204933401f84706ababb6d9a216d070
MD5 for non-aroma build - 617222b57f22ba0834173145d00f7236
Upstream merge until 7-may-2017
Update stock kernel
Updated Alucard kernel
Remerge 7.1.2 to avoid issues
Update to r8
Stable3 Wallpaper
STweaks profiles edits
Add the new HealthD flag to device tree
jflte: turn off carrier provisioning and allow tethering for everyone
Dex2oat speed edits
Edits on audio
Updated default bootanimation
Aroma installer buttons, icons, and colors change
system.prop:Enable use.voice.path.for.pcm.voip
Quick unlock on lockscreen password
Edits on ramdisk affecting battery life
Stweaks:New variable about mediaserver killer
STweaks:Allow user to select other IO while sleeping
CameraWrapper:Increase camera open retries
Add ldjcdo to test team/Remove SkL
Add hyper,pegasusq and slim CPU governors
Wifi Edits from upstream
SystemUI: Use AOSP AutoBrightness implementation
GsmCdmaPhone: Fix GSM SIM card ICCID on NV sub CDMA devices
Speedup the dex2oat operation
Edit on BlueTooth HPF overlay
Truly enable sdcardfs
(IF YOU HAVE ISSUES REMOVE THE ro.sys.sdcardfs=true FROM YOUR /system/build.prop AND REBOOT)
Enable and tweak KSM
Update our flashables
Update aroma-installed packages
Update WebView
Support Custom QS rows/columns
QS Tile which support partial screenshot
GPU MAXIMUM FREQUENCY IS SET TO 200Mhz.Change it if you want from STweaks
Drop stock browser.Use Jelly
prop:set persist.bluetooth.disableabsvol=false
profiles:Fix camera and headset mic volumes
Introduce Aroma-BootAnimations.See it at Optimized LineageOS Settings
Revert "telephony:Hack GSM and LTE signal strength
post-init:Speedup the profiles loading after boot
Update backuptool scripts(Dirty installations are even stabler)
Settings:Add changelog tile(About phone section)
20170413 / (13-April-2017)
MD5 for aroma build - daa09690b2ea350a3cd75d1b98e9708f
MD5 for non-aroma build - 8816663fddf8c97e73ecdaa2a0f335ef
Upstream merge until 12-April
Update stock kernel to 11 April
Update to 7.1.2
Stable2 Wallpaper
Kernel:Enforce kernel to read users edits
Kernel:Huge updates regarding battery life
Readd Logger switch.Default: OFF.REBOOT WHEN CHANGED.(Stweaks/OTHER/Logger)
Kill mediaserver on boot
system.prop: Disable 2 audio-voip flags.Fixes some VOIP apps
Recalculate the lights values
Add HPF bt profile
Reorganize the contributors list
Fix panorama mode on Snap camera
Enable night mode.New QS Tile
Edits on lockscreen's charging message
aroma:Allow user to select Magisk
Faster boot speed
Faster reboot to recovery
Edits on doze
Add lekiaM to contributors
Allow user to select different LED color when device is fully charged
Add some extra infos on some STweaks menus
Edits on Gapps killer
Update ThemeInterfacer
Get latest Substratum commits
Bypass SafetyNet check
Updated ramdisk scripts for Magisk root
Fixed CVE-2017-0583
Show USB mode dialog when USB is inserted
BatteryStatsService:Stop logcat spam about modem
CPU usage overlay:Relocate it,make its interval faster,remove temperature
telephony:Hack GSM and LTE signal strength
Timezone bug is now fixed(Partially?)
Reduce reboot delay by 4 seconds
Edits on LTE tile
Still doesnt work,for a strange reason.to make it work
From Settings use 3g as prefered network
Now the QS tile should be disabled.
It now works
Speed up the UI feeling without affect the animation speeds
Remove the icon from 'Clean all' tweaks
Update Webview
Remove Soft Reboot option
Details here:https://github.com/JDCTeam/android_...mmit/86306fb5df2cdb7932b51a0dbe88b096cb7ac913
Advanced reboot is automatically enabled when you enable dev options
Support microG Gapps by supporting fake signature spoofing
20170120 / (13-February-2017)
MD5 for aroma build - 8198edab63f3e45d81e26773903a7930
MD5 for non-aroma build - 0073655d738380181050645e7771898a
Upstream merge until 13-Feb-2016
Update stock kernel to 13-Feb-2016
Fixes on cellular issues.Affects Sprint variants
Fix device behavior when lid case exist
Overlay:Add some BT profiles
Keep WiFi on during sleep by default
Set backKill time to 250ms
kernel: Disable CPUSET code
system.prop:Enable quick power on
system.prop:Set delay of ringing while calling to 0
fix f2fs for alucard kernel when using SuperSU
[Test]PermissionGrant: added missing permission for gapps
sepolicy: Fix denials after restore of ROM backup
OMS updates
Removed HexoLibre.RIP Theme Engine
Substratum does NOT come with ROM.Please get it from PlayStore
Use 4 cores while installing apps
Updated flashables and aroma packages
Updated webview
Some camera stability edits(Placebo?You tell me)
Fix a buggy situation while Lid case cause freeze
Edited icon when no recents apps,at recents panel
Do not show clear icon when no recent apps
Edited sound steps
Long press Power to activate Torch
Vibrate when connecting or disconnecting a power source
20170120 / (20-January-2017)
MD5 for aroma build - 4caf50d8ec345e25815c30c5210539fe
MD5 for non-aroma build - 08cd79f2277580ab639057849333e5ca
Upstream merge until 20-Jan-2016
Update stock kernel to 20-Jan-2016
LineageOS
Revision r9
Reconstruct the way that ROM is provided
Kernel and ramdisk big updates
STweaks is updated
Refresh Snap preview after photo shoot
Edits on Doze
Substratum support
Edit SMS Limit and restrictions
Wallpaper
Several device edits(affects partitions)
Updated Snap camera
Completely remove CMStats and its drain
Stop some logcat spams
Disable LiveDisplay by default
SuperSU to 2.79 SR3
Give persistent SU access to system apps
Fix WiFi Hotspot
Enable Google Assistant
Add an advanced Google Play Services killer(Default) 'Stweaks/OTHER tab"
SystemUI:Remove 'x' sign from signal icon
Update Wallpaper app
Update ES file manager app
Updated bootanimation
Updated WebView
Add ability to download flashables from Opt-LineageOS menu
Give the proper permissions to your browser
Many transitions from CM to LineageOS
Fix SuperSU related logcat spam
Add membar to OptLineage tweaks
Set back button kill timeout to 500ms
Increase timeout to compile GMS core
Add ability to restrict app data/wifi usage
LineageOS official bootanimation
Add CPU info overlay at developer options
Add mattgyver to Test Team
bluetooth:Allow HFP protocol
Edit Straight Talk APN
Enable Blur feature
Add unlink volumes feature
Some notes about the new build....
F2FS is known to cause issues when we use SuperSU.I hardly suggest to use ext4 for all partitions
On the first boot u may have some browser and music FCs...not constantly though.Select the option to mute the notification until next reboot.
So ,give all the permissions to those apps and reboot when u setup ur device
On the next reboot you wont have such issues.
The folder link contains 2 ZIP files.1 is the aroma 1 is the NON aroma build for those who got issues with it.
Non-aroma build contains :
Alucard kernel
CM File manager
No Nexus apps
No SuperSU
AOSP camera only
Optimized LineageOS settings has got options to download all the aroma installer packages.To do that ,simply click on the desired package.
To make this work,u must have already give the proper permissions to your browser.You can download any package ,even if you installed aroma zip
Dont you want to make a fully clean install ? no problem.BUT.keep in mind that dirty install will keep ur old kernel changes even i made changes to kernel.
So
if u really want to make a dirty install and keep your kernel settings,simply flash the zip over the old one.(optional:delete system and dalvik before that )
if u really want to make a dirty install with the new kernel settings,delete the folder /data/.b--b/ from twrps file manager and then flash the rom as situation 1)
The late reboot time is a known issue on s4 with nougat roms.
Changelog:
20161224 / (24-December-2016)
MD5- 5484ab6d746c2bc8601b5172d01f5d69
---------------------------------------------------
Upstream merge until 24-dec-2016
Update stock kernel to 24-dec-2016
Settings apk:Back to stock colors
APN changes
Kernel and ramdisk changes
RIL/Network changes from upstream
Changed wallpaper
Updated SuperSU to 2.79 SR1
Fix SElinux switch at STweaks
Disabled SDCARDfs again
No scrolling cache-I need smoothness.not speed
Always show battery percentage when charging
Increase sms limit
Removed Gello app
20161210 / (10-December-2016)
MD5- 0db973ada05a5c3800194e8f5308ac64
Upstream merge until 9-dec-2016
Update stock kernel to 9-dec-2016
Update to Android 7.1.1_r4
Ramdisk and profiles updates
Kernel updates
F2FS and sdcard edits
Supersu:Update to v2.78-SR5
STweaks:do not dex preopt
Update ril-service daemon
Add Recents Panel tweaks from OptCM13
New wallpaper
Brand new Snap camera
-Still buggy.Its not ROMs issue.Snap camera is
under development.USE IT AT YOUR OWN RISK!!!
Bugs:
HDR not working.Its N issue.not Snap.wont work
with any app
1 shot with back camera
= freeze of camera preview.
App does NOT freeze.Camera preview DOES.
solution:
Switch to front camera,and back again
OR
press home button to minimize and run it
again to be back
Add OptCM13s camera wrapper
Resetting proximity sensor on every ROM flash
Replace charging string on keyguard(Help me translate
Improve scrolling cache
Speed up background transitions
Add LTE tile(Works but not visible to Settings app
Hold click to get in Network preference menu
Add Sound tile
Add Switch to disable/enable wake on plug
More edits affecting dirty installations
Change the base main color of ROM
Settings icon has got our custom color
Fix circle battery icon
Fix network switch(Preferred network type
Turn off some default CM display features
Implement press home to answer call
Remove STweaks and SuperSU from JDCSettings if not installed
Settings:LED capabilities
Aroma
Add Nexus Launcher & Wallpaper capability
Also clean on installing:
-/sdcard/Android
-/sdcard/DCIM/.thumbnails
-/sdcard/LOST.DIR
Add Camera selection capability
Add file manager selection capability
Fully edited UI
20161121 / (21-November-2016)
MD5- aa8fc17391deed6b3cf8a8b83b5578fb
Big upstream until 21-nov-2016
Stock kernel updated kernel until 21-nov-2016
Alucard kernel updated
Ramdisk changes
Wallpaper changed
Add contributors to Settings/About phone
Remove CM updater
Add S7's UI touch/unlock/lock sounds
Battery save color is now light gray
Disable tap2wake by default(Not supported by kernel)
Disable captive portal by default
Force fast UI experience
Remove useless CM's features
Add JDCTeam's custom scripts(eMMC Trim,LEDify)
Add Samsung's stock notification/alarm sounds from lollipop
Remove snap camera/use aosp one
Edits on camera.(Video recording is partially working)
Edits on ramdisk that affects charging
Fix f2fs
Allow dirty installations(A custom script ensures /system wipe)
Introduce JDCSettings Settings section
Build with -O3 flag on clang
Expose ROM's name at ABOUT PHONE section
Storage manager is enabled by default
Add Google Assistant property
Updates on blobs/graphics
Default STweaks theme is Sammy one
Fix unified tree(All device are now supported!)
20161013 / (13-October-2016)
MD5- dontcare
Initial test release

OptCM13/14 Test Team
@Creeper36
@Chibbo
@-Deco-
@Feedmeeeee
@Pwnycorn
@sjamie
@mattgyver
@lekiaM
JDCTeam's members
Do you have plenty of time and android knowledge?Drop me a PM.i may need you to my team
OptCM Slack channel is closed due to inactivity.Seems like that people prefer an already-chewed food to eat than,cook it.

Many thanks for your generous donations !
All donators are welcome to join the optcm test team and / or get access to beta versions built every couple of days, PM me for details.
Differences compared to nightly so far
JDCToolbox
ROM built with Linaro toolchain
Stock kernel built with Linaro toolchain
Custom Setup Wizard
faster transitions
Unified tree(didnt test CDMA.please report me back)
Custom boot animation
Holding home button presents recents menu
Odexed
Aroma installer
Alucard kernel
STweaks
Some tweaks out of lineageOS
Enable logcat on stock kernel
Code:
adb shell
su
start logd
exit
adb logcat > mylog.txt
Google assistant guide
by @Apad121
thanks for that mate
Apad121 said:
Hi everyone
Just wanted to say that I got Google Assistant working on this ROM and it seems fast to work really well!
BTW the bug above happens to all devices that aren't pixel or nexus.
THE BUG WITH OK GOOGLE IS WORKING NOW..... SEE BELOW IN STEP 9:
GUIDE ---- I had to find lots of articles and looked through many guides because CM14.1 was slightly different to CM14 and android nougat. Because of how we flashed different Gapps it made the installation quite difficult. However after a bit of problem solving and determination I succeeded in getting Google Assistant on this great ROM.
1 Go to build.prop (I just used BuildProp Editor from the Play store, once in the app I pressed the edit button on the top right)
2 I changed "ro.product.name=cm_jflte" to "ro.product.name=Pixel XL" (I am not convinced this is neccassary but I did it anyway and it works)
3 Add "ro.product.model=Pixel XL" at the bottom (the ROM didn't have the ro.product.model bit that most phones seem to have...)
4 Add ro.opa.eligible_device=true after the above (Add this underneath the 3rd step)
5 Save the build prop then Reboot phone (Almost there)
6 Clear Google app data (This is to help ensure the process works)
7 Launch Google assistant as if you would launch now on tap so go to settings>functions> select home button >long press >select search assistant (OR SET IT TO ANY OTHER BUTTON YOU WANT)
8 Go to Google app settings and check you have enabled Google assistant
9Install the application and setup (credit to @masterchop for making this app ) ChopAssistant https://play.google.com/store/apps/details?id=choplabalagun.blogspot.com.chopassistant&hl=en
10 FINISHED! :laugh: (Please read the rest below)
IF IT STILL DOESN'T WORK DO NOT WORRY ---- IF YOU FLASHED A SMALL GAPPS SUCH AS PICO GAPPS THEN THERE IS STILL 1 MORE STEP!!!
11 Now if you had to install the google app when you first setup the phone, then you need to move the file "com.google.android.googlequicksearchbox-1" from data/app to system/priv-app
Google Assistant for CM14.1, this guide covers most errors and problems you will face for installing it on any device including CM14 and Android 7.x
Reboot and NOW GOOGLE ASSISTANT should work with "OK Google" working too!
PLEASE LEAVE A LIKE IF THIS HELPED! :laugh:
Click to expand...
Click to collapse

Hehe! Jdc did it again!

Today is a good day ?
Enviado desde mi GT-I9505 mediante Tapatalk

angelcalibur said:
Hehe! Jdc did it again!
Click to expand...
Click to collapse
thaaaaaaats true mate

Where is the download link? It says its on drive but I don't see a link? ?
Sent from my SGH-M919 using Tapatalk

It's Awsome thank you

Xplorer4x4 said:
Where is the download link? It says its on drive but I don't see a link? ?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Try again.my fault.thanks!

Downlaoding

Wow, huge deal, thanks JDCTeam! Very excited to have this on my phone!
----Sent from my phone----

For who have installed the rom: wich gapps are you using ? Thanks :cyclops:

AlfaTeam Corporation said:
For who have installed the rom: wich gapps are you using ? Thanks :cyclops:
Click to expand...
Click to collapse
Please use the suggested package which is OpenGapps.read first post

I'm trying to download but it never downloads successfully. Can you use a different host maybe?
Sent from my SGH-M919 using Tapatalk

Xplorer4x4 said:
I'm trying to download but it never downloads successfully. Can you use a different host maybe?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
not now.i have made 20gb upload today

side said:
Please use the suggested package which is OpenGapps.read first post
Click to expand...
Click to collapse
Okay, thanks The Galaxy S4 i9505 is ARM64 ?

AlfaTeam Corporation said:
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
Click to expand...
Click to collapse
ΑRM

AlfaTeam Corporation said:
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
Click to expand...
Click to collapse
No just arm
Sent from my SGH-M919 using Tapatalk
---------- Post added at 03:18 PM ---------- Previous post was at 03:14 PM ----------
Can any one upload this to a mirror?
Sent from my SGH-M919 using Tapatalk

Based on CyanogenMod 13.0 - Android 6.0.1 Marshmallow
Click to expand...
Click to collapse

[JDCTeam] Resurrection Remix 5.8.5 FINAL Rel 40 [23 Mar] [7.1.2_r36] [EOL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix 5.8.5Samsung Galaxy S4 i9505 (jfltexx)Release 40 - 23rd March 2018
Code:
#include
/*
* Your warranty is now void.
* And other random stuff no-one reads.
*/
Intro
This is a straight port of Resurrection Remix with a tweaked kernel for Galaxy S4 i9505.
It is based on Nougat 7.1.2_r36 and nightlies of LineageOS 14.1 and Resurrection Remix from 20th March.
Security updates up to 20th March are applied, including Kernel.
OMS / Substratum is the integrated theme engine since Release 12.
Magisk is the integrated root and system modification hiding solution since Release 18.
Since Release 37 only the Rootless build is distributed.Features
Code:
● navigation bar ▼
- enable/disable navbar
- navbar colour tint
- navbar button customisation smart bar
- navbar pulse
- navbar fling
- double tap to sleep navbar
● status bar ▼
- brightness slider
- enable / disable show notification count
- superuser indicator switch
- double tap to sleep status bar
- carrier label
- carrier label switch
- carrier label colour
- carrier label size
- clock customisation's
- time & date
- day & date toggle
- centre / right / left clock choice
- date format
- clock font styles
● battery ▼
- battery bar customisation
- battery icon customisation (circle / landscape / portrait and more)
- battery % text
● network traffic indicator ▼
- network traffic arrows switch
- incoming / outgoing traffic
- network traffic colour
● status bar RR logo ▼
- RR logo colour
- position
● custom logos ▼
- logo colour
- position
- style
● status bar weather ▼
- weather colour
- weather position (left / right)
- weather font style
- weather size
● status bar ticker ▼
- ticker text colour
- ticker icon colour
● animations ▼
- toast animations
- list view animations
- system animations
- qs tile animations
- power menu animations
- misc animations
● gestures ▼
- gestures anywhere feature
- 3 finger swipe screenshot gesture
● app circle bar ▼
- choose apps in app sidebar
- trigger width
- trigger height
- trigger position
● app sidebar ▼
- choose apps in app circle
- trigger width
- trigger height
- trigger position
● pie control ▼
- pie trigger (left / right / bottom)
- pie targets
- pie colours
- more pie features
● recents panel ▼
- clear all button switch
- clear all tasks switch
- clear all button location (top right / top left / top centre / bottom left / bottom right / bottom centre)
- full screen recents
- recents styles
- omniswitch
● cclock widget ▼
- clock and alarm customisation's
- weather panel customisation's
- calender events
● lockscreen ▼
- lock screen bottom shortcuts
- lock screen general shortcuts
- 100+ icons for shortcuts
- double tap to sleep lock screen
- lock screen media art / enable disable
- quick pin / patter unlock
- lockscreen wallpaper
- lock screen weather widget
- lock screen icons colour
● quick settings draggable tiles ▼
- customisable tiles
- dynamic tiles adjustment
- number of columns / rows
- tile animations
● notification drawer ▼
- task manager
- custom headers
- long press toggles to enter settings
- disable immersive mode messages
- force expand notification
- quick pull-down
- smart pull-down
- notification panel transparency
- volume dialog transparency
- notification panel stroke
- volume dialog stroke
● buttons ▼
- back-light timer
- back-light strength
● advanced reboot menu ▼
- power off
- reboot (recovery / boot-loader / hot reboot)
- screen-shot
- power menu end calls switch
- restart systemui
- aeroplane mode
- screen record
- on the go mode
- sound panel
● home button (for devices with hw keys only) ▼
- home button answer call
- long press actions
- double tap actions
● menu button (for devices with hw keys only) ▼
- short press actions
- long press actions
● search button (if device supports) ▼
- short press action
- long press action
● volume buttons ▼
- wake up device
- playback control
- ringtone volume control
- keyboard cursor control
- swap buttons on landscape mode
- volume key answer
● miscellaneous ▼
- selinux switch (switch between permissive and enforcing selinux if device has selinux enabled)
- clock shortcut
- disable battery saver warning colour
- ota updates
- camera shutter sound enable / disable
● systemui tuner ▼
- enabled by default
- removed demo mode and tweaked systemui tuner as compared to aosp
- status bar icons customisation's
- quick settings customisation's
● other features ▼
- performance profiles
- lcd density
- expanded desktop mode
- heads up switch and customisation's
- live display
- configurable 0/90 / 180 / 270 degree rotation
- lock screen auto-rotate switch
- double tap power button to enable camera gesture
- prevent accidental wake-up
- wake phone on charging plug
- battery light customisation's
- notification light customisation's
- font size
- CM privacy guard
- RR ota
- CM root inbuilt
- new RR configurations
- overall smoothness improvements
- optimisation's to improve battery
- includes all android nougat features
- includes all CM14.1 features
- and much much more ...
Download
Available releases:
OLD:
Release 17 - 7.1.1, last CM root version.
Release 28 - 7.1.2, Magisk 12 root, July security updates.
Release 29 - 7.1.2, Magisk 13.3 root, July security updates.
Release 30 - 7.1.2, Magisk 13.3 root, August security updates.
Release 32 - 7.1.2, Magisk 14.0 root, September security updates.
Release 33 - 7.1.2, Magisk 14.2 root, September security updates.
Release 34 - 7.1.2, Magisk 14.3 root, October security updates.
Release 35 - 7.1.2, Magisk 14.3 root, October security updates, WPA_supplicant fixes.
Release 36 - 7.1.2, Magisk 14.3 root, October security updates, WPA_supplicant fixes.
Release 37 - 7.1.2 Rootless, November security updates, Krack fixes.
Release 38 - 7.1.2 Rootless, December security updates.
Release 39 - 7.1.2 Rootless, January security updates.
CURRENT: Release 40 - New builds only from AFH going forward.
Download latest ROM from AndroidFileHost.
Download archived roms rom Sourceforge.
Source code
BuffCore kernel: here
Buffs' common device tree: here
RR code: here LOS code: here
Build instructions (use old method) here
All code in this rom is correctly forked / cherry picked / credited where not authored by Buff99.
Anyone can use my repos if they do the polite thing and ASK PERMISSION FIRST - no use outwith this please.
What does / doesn't work
All hardware support issues will be the same as LOS / CM 14.1.
DOES
GPS, orientation and acceleration work. GPS Status gets a good fix indoors.
Camera.
MHL video output.
OMS support integrated.
Magisk integrated.
You tell me.
DOESN'T
GLONASS.
You tell me.
Thanks / Credits
Code:
* Resurrection Remix core team, The extended team of RR maintainers
* CM team, LOS team, Omni team, Slim team.
* XDA developers, AndroidFileHost, Sourceforge, Github.
* Everyone who has contributed to LOS / CM on S4.
* The [COLOR=Red]Buff99_RR_test_team[/COLOR] for help and support:
* [URL="https://forum.xda-developers.com/member.php?u=4204995"]Sjamie[/URL], [URL="https://forum.xda-developers.com/member.php?u=7995577"]63ck0[/URL], [URL="https://forum.xda-developers.com/member.php?u=4669592"]Rabbit48[/URL],
* [URL="https://forum.xda-developers.com/member.php?u=5978751"]-Sohail[/URL], [URL="https://forum.xda-developers.com/member.php?u=3750366"]Andy Hall[/URL], [URL="https://forum.xda-developers.com/member.php?u=7868788"]Frankv723[/URL]
* Many thanks to [URL="https://forum.xda-developers.com/member.php?u=5968293"]Side[/URL]
* The [COLOR=Red]OptLos_test_team[/COLOR] and JDCTeam.
* Did I already thank [URL="https://forum.xda-developers.com/member.php?u=5968293"]Side[/URL]? Yes [URL="https://forum.xda-developers.com/member.php?u=5968293"]Side[/URL]. [URL="https://forum.xda-developers.com/member.php?u=5968293"]Side[/URL] MUST be thanked more than once.
* TJsteveMX and Srisurya95 for their previous work.
* DaveJimson, ReubenBrown13, Elv1503, Nxss4 - initial beta testing.
XDA:DevDB Information
Resurrection Remix Nougat for S4 i9505 (jfltexx), ROM for the Samsung Galaxy S4
Contributors
Buff99, side
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Lollipop supporting bootloader and modem / non-hlos
Based On: LineageOS
Version Information
Status: No Longer Updated
Current Stable Version: Release 2
Stable Release Date: 2016-11-27
Created 2016-11-26
Last Updated 2018-12-02

Installation
Required for installation: Recovery - Latest version of TWRP - TWRP 3.1.1-0
Firmware - Lollipop supporting bootloader and modem / non-hlos. Look in _Bon_Bon's great MODEMS and BOOTLOADERS collection
Gapps - a latest version of Open Gapps 7.1. Either Pico / Nano or see Addons post #7 below about how to use a Config-Gapps file to customise a Super Gapps install1st install - " clean install "
Make a full nandroid backup <always backup!>.
Properly remove previous root solution i.e. flash Magisk uninstaller and / or UnSU.
Fully wipe device.
Install Rom.
Install desired root solution if using Rootless.
Install Gapps.
Wipe Cache and Art / Dalvik.
Reboot.
Wait for 1st boot.
Enjoy.
2nd and subsequent installs - " dirty flash "
If you do not follow these instructions you will get install / boot problems.
Uninstall all Substratum overlays.
Make a full nandroid backup <always backup!>.
Properly remove previous root solution i.e. flash Magisk uninstaller and / or UnSU.
Wipe System, Cache and Art / Dalvik <wiping System is ESSENTIAL for Magisk>.
Install Rom.
Install desired root solution if using Rootless.
Install latest Gapps (Updating with latest Gapps for every dirty flash is A Good Thing).
Wipe Cache and Art / Dalvik.
Reboot.
Wait for App optimization.
Enjoy.
Swapping between Magisk and Rootless builds
Changing build types is as simple as following the full dirty install procedure, changing the root solution in the appropriate place.
While dirty flashing may be possible for some updates, be prepared that progress sometimes means you will need to clean install updates!
Nandroid backups are your friend!

Latest changelist
- Release 40 -
Release-40-changelog.txt
md5sum - a365b7177dc31c0b91e7dd85a4395d6d

Fixes to APN's and sensitive numbers.
Fix SELinux policy for MAX88920 calibration file
Updated translations.
Bump security patch level to 2018-03-05.
Kernel: Buffcore 1.8.
Simple GPU governor added. Don't think it's any better than ondemand though, so not enabled by default.
Security fixes, bug fixes, crypto fixes.
March 2018 security updates applied for RR, LOS and kernel.
RR and LOS code grabbed at 12:00 GMT Tuesday 20th March.
Please view the attachment for further details.
Thanks to Buff99_RR_test_team for help and support: Sjamie, 63ck0, Rabbit48, -Sohail, Andy Hall, Frankv723
Thanks to OptLos_test_team & Side

Reporting bugs
Proper reporting of issues will help me spend time productively fixing bugs rather than tail chasing vague issues.
Please follow these guidelines.
Reporting bugs
If you wish to report an issue, then the onus is on you to prove the issue.
If you provide exact replication instructions, an idea of how often the issue occurs and logs that enable me to replicate the issue then a fix will be possible ("if you do action 1 then action 2 then action 3 you will find that bug X occurs 100% of the time").
If you give a vague complaint about an issue then I will not look at it without explicit replication instructions and preferably logs ("phone overheats when using CallOfDirty") .
Issues about overheating, battery life or performance should be backed up with information from relevant monitoring apps.
One-off issues generally do not get investigated unless they are well documented and have provided logs.
Issues that are specific to one piece of software will generally not get investigated without logs. I am not very keen on installing software to investigate bugs, especially if I need to create user accounts. If you can replicate the issue on more than one piece of software it will increase the chance of being fixed.
Issues to do with speaker or microphone related issues need to be explicit about which speaker and mic is in use (internal, head phones, earphones, bluetooth headset, Bluetooth speakers), whether normal earpiece or hands free mode is in use, Audio mods that have been installed. Logs may be helpful too.
Issues with media / streaming / playback should be provided with examples.
A picture is worth a thousand words; a movie is thousands of pictures. If you cannot describe your problem in words, post pictures or movies to help show your issue. The rom has in-built screen capture and screen recording tools, so please use them.
It can often be difficult to tell what is going on with logs from a fully loaded system. It can help a lot if you make a nandroid of your current system, format and then make a clean install, with gapps only if needed, and only the app that causes the issue - as minimal a system for replication as possible - then replicate the bug and capture logs. If I then have to replicate the issue I can easily replicate your system.
If you want to send a full set of logs for a bug, I recommend using Syslog.
Perform some of the functionality that is bugged and then capture logs in the app.
If you have had a reboot then capture a set of logs immediately when the system reboots. If the last-kmsg file is empty then the logs are useless.
Type a brief description of the problem in the notes field and your XDA username .
Select to scrub personal information.
Upload it to a web based host (gdrive, dropbox, etc.) and PM the link to me.
And remember:
The Drill .... settings > configurations > about > the drill > logcat or GTFO

Hints, tips & FAQs
RR is a very feature laden rom. Don't go mad and switch everything on when you first boot. Concentrate on a feature and see how you like it. Blur for example can take a lot of tuning to look right.
- If something does not run go into Settings > Privacy > Privacy Guard and check settings.
- To enable root go to Magisk Manager.
- Use Open Gapps for your Google apps. You can either use the smallest version you can get away with (recommended Pico or Nano) or use a larger version in combination with a gapps-config file, see post #7.
- Most issues / caveats for CM14.1 / LOS will apply for this rom!
- Long boot times on 2nd and subsequent boots? Go into Settings > Privacy > Privacy Guard > Advanced > Bootup and disable startup on apps that don't need started on every boot.
- After flashing in TWRP you may see two messages saying "E:unknown command" - this can happen on all CM14.1 based roms and is nothing to worry about.
Q. Does xposed....
A. There are now versions of Xposed which run on Nougat. However Xposed WILL NOT BE SUPPORTED AT ALL. You will be on your own. Do not report bugs. Logs that show Xposed use will be ignored.
Q. The install button does not work when I want to install an app, usually a non market side-loaded app?
A. Stop / disable the application running that is using a screen overlay.
Q. Does OTA work?
A. Yes. It checks to see if a new version has been published and alerts you. Links are provided in the OTA app for direct downloads. The rom will still need to be flashed manually as normal.
Q. Why is there now a Magisk and a Rootless build?
A. The work on this Nougat RR rom is nearly finished. I am now giving the user the option of selecting to install a root of their choice, or go with the current Magisk. Once I have finished releasing builds the Rootless version will allow you to install the latest Magisk version of the day rather than an old obsolete version that will need updated once the rom is installed. Running the rom without any root applied is also a viable option.
Q. What theme engine is integrated?
A. Full OMS7 support has been implemented from version 12 onwards, so Substratum can be installed from the play store if you wish to theme the rom.
Q. Can I use an alternate kernel?
A. You may be able to use other kernels. Use Flashify to flash them or extract the boot.img and flash as img from TWRP. Do not wipe kernel / dalvik if only flashing a kernel. SideCore looks to be a promising alternative. Buffcore FYI is now very closely related to SideCore and for most uses you will notice no difference between the two.
Q. I would like louder / better quality sound.
A. You could us the latest mod by A.R.I.S.E. - ARISE+Magnum+Opus+20180105+Stock+Edition.zip from here. See advanced post #7 for more on Arise. I no longer use Arise as I find the available Magisk mods to be less bloated and better performing. From Magisk downloads I recommend installing "Ainur Sauron", "Viper4Android FA by Ahrion" and "Audio Modification Library".
Q. Can I replace the weather provider?
A. Go to settings > apps > configure apps > weather. Add weather provider takes you to the playstore. Download Yahoo weather provider. Back to weather and enable Yahoo weather provider.
Q. Can I mirror the rom on a different provider?
A. NO! only want the rom served from AFH and Sourceforge so I can monitor downloads. NO mirroring is permitted. Downloads from other providers will not be supported.
Q. Can you make an i9515 (or other variant) build too?
A. Sorry but I am not going to make another blind build, too much grief and hassle.
Q. My screen goes black when making or receiving a call and does not return?
A. You probably need to clean and / or re-calibrate your proximity sensor. See here.
Official Resurrection Remix FAQ: here
Crowdin for translations here
Feature requests to "thoughts / feedback" section of RR G+ page here

Advanced
Magisk:
From version 37 I don't include Magisk, it's up to you to choose your root solution.
Recommended: enable Magisk hide for Google play store and Google services framework (if using substratum also hide overlays for GPS & GSF - thanks Catscratch).
Recommended: disable busy box and host hiding.
Recommended: ensure you are certified in Google play store.
Recommended: only enable Magisk Hide when you are actually trying to hide something, may have caused root disapearing bugs.
If you want to play Mario run, you need both Magisk Hide enabled and Magisk Manager hidden.
If you have Magisk problems refer to the Magisk support thread here.
Good thread of hints and tips for Magisk by Didgeridoohan here.
Debug options esp. ADB over USB should be disabled if you are trying to get a safetynet pass.If you need busybox, the Stericson version from playstore works fine.
Adaway 3.2 is the recommended host filtering solution.
Rootless:
From version 37 I only distribute the Rootless version.
Rootless is intended to allow the user to choose which root solution to apply.
This will be especially useful in future when Magisk 14.5 is no longer current.
The rom should even be useable without any root applied.
Google play store certification:
If you find protected applications not appearing when expected in play store, check in the settings to see the certification state. When uncertified, apps like Mario run will not show up.
To force certified, stop the play store and delete it's data. Ensure you can pass SafetyNet. Next time you start you should be certified.
F2fs
F2fs file system is supported.
It is only recommended to use with the /data and /cache partitions, leave /system as default ext4.
Caution! The /data partition contains your internal SD card partition. Although it does not get backed up when you nandroid, if you format /data you will lose the contents of Internal SD. So we need to back this up ourselves if we are changing /data.
To change /data and /cache to F2fs:Connect your phone to your PC with your trusty USB cable.
In TWRP, go into Mount and enable MTP.
Copy everything from your internal SD to a folder on your PC.
Unmount MTP.
Go into Backup and perform a full nandroid backup.
Go into Wipe and change File System on /data and /cache from ext4 to f2fs.
Restore the /data and /cache partitions from your newly performed backup (will warn you that you are restoring to a different file system, is OK).
Go back to Mount and enable MTP again.
Copy the internal SD contents back from PC.
Job done.

Addons
Arise:
For Release 39 use the latest ARISE+Magnum+Opus+20180105+Stock+Edition.zip from here.
Recommended: use the in-built compatibility module for Magisk. My attached Arise prop file has had this edit added.
DO not install Arise as part of an initial Clean install - has been observed that wifi connectivity has been lost due to this. Do first install as ONLY rom + (root solution) Gapps, let OS boot and settle / install apps THEN boot back into TWRP and do a dirty flash with Arise.
Arkamys audio is now broken and should not be used (from my testing anyway).
Don't be scared of it not being an aroma installer - it is actually easier and more flexible once you are used to it.
Place your edited arise_customize.prop into the root folder of your internal SD card.
The procedure for a full dirty flash with Arise then becomes:Boot into TWRP and flash: Rom, (root solution), Gapps, Arise Magnum Opus, clear cache, reboot.
My arise_customize.prop for Opus is attached as an example to this post. You may notice it has been simplified. Try it!
For listening to loud raucous heavy metal I use:Installed using Opus prop: Core install, ViPER4Arise 2.5.0.5, v4a_profiles, Qualcomm effects = ANDROID_O, DIRAC, Uninstall MusicFX.
Viper4Arise settings: Convolver ON (DFX metal rap big bass), Viper Bass ON (Freq 60Hz, Boost 12db), Viper Clarity ON (Natural, 3.5db)
Big Gapps:
Large Gapps packages can be installed with our large system volume, saving valuable /data space by allowing you to fill unused /system space with the Google apps you normally install from the play store.
However, do not just install the full super package and expect there to be no impact on the fluidity of your system. Installing everything will bog your system down with too much unnecessary crap.
Recommended: setup a gapps-config.txt file to customise what gets installed to your preference and use the full Super Gapps file. Using this I delete some unnecessary apps for me from the rom (trebuchet launcher, AOSP keyboard, live wallpapers, exchange, calendar) and add in about 400 Mb of google apps I normally install anyway.
Gapps-config.txt can be leveraged to uninstall pretty much any file in the rom. This is a very powerful feature.
The basic idea for setting up the config-gapps file is: Core gapps are automatically installed, so you don't bother with them. Add the Pico and Nano apps as you prefer. Add all the Google apps you normally install from the playstore.
Gapps-config.txt needs to be in the same folder as the gapps file you will be using.
Careful you do not delete essential apps for boot : you need to have a launcher and keyboard, otherwise you won't be able to do anything on first boot. Watch out for apps which delete others when added (launcher, keyboard, etc.).
I have included a zip with my config-gapps as an example and a template file setup to make it easy for you to creat your own custom version.
Spectrum
Spectrum is a basic profile switcher app by @frap129 for switching performance profiles pre-setup by the rom dev.
Download Spectrum app here.
There are 4 profiles setup in the rom for use in Spectrum. The names and descriptions are preset - the descriptions in Spectrum don't really relate too much to Buff99 profiles.
The Spectrum application does not need to be installed if you do not wish to use profile switching.
If you do not install the app the default profile ("Balanced") is used.
You can directly change profiles without the app by saving a value of 0 - 3 to /data/property/persist.spectrum.profile
BALANCED (0)
The default Buff setup, same as without Spectrum applied.
PERFORMANCE (1)
Slightly slower version of balanced.
BATTERY (2)
Tweaked for a lower speed and better battery usage. Will not be as quick to perform certain tasks but will be more battery frugal.
GAMING (3)
Setup the same as balanced, except the governer is tweaked to work with user tweaked voltages.
Balanced, Performance and Battery are setup to use with default voltages (Power efficient speeds are favoured).
Gaming is setup to be used with user tweaked voltages, and scales more smoothly between all voltages.
Any suggestions of settings to apply are welcome.
View attachment Buff99_arise_customize.prop.zip
Setup for Arise versions from 20170424 - 20180105
Core install, ViPER4Arise 2.5.0.5, v4a_profiles, Qualcomm effects = ANDROID_O, DIRAC, Uninstall MusicFX + ADDED magisk compatibility mod.
View attachment Buff99_gapps-config_2.0.zip
Version 2.0 - new template to make it easier to create your own version!

Donators
Donators- Hall of Fame -
Никита Перерослый
Matthias Behr
Bruno Mercier
Quentin Vanduele
Scott Dill
Sean Higgins
Jeremy Watts
Andrew Swanson
Kristopher Kolessar
Andre Kuehne
Jose Angel Palenque Plaza
Many thanks for your generous donations !
All donators are welcome to join the Buff99_RR_test_team and / or get access to beta versions built every couple of days, PM me for details.

Video rec work ?
Sent from my SM-G903F using Tapatalk

mbaier said:
Video rec work ?
Sent from my SM-G903F using Tapatalk
Click to expand...
Click to collapse
nope; rom is untested and bugs need reported.

It's a official release? Are u the official manteiner?
Thx for this work

AndroidianoSr said:
It's a official release? Are u the official manteiner?
Thx for this work
Click to expand...
Click to collapse
It is unofficial on jfltexx for the moment but I am official Note 8 tablet maintainer.
I am hopeful releasing this will raise interest and others will volunteer to help out on an official build as I don't want to be sole maintainer.

How can I change weather provider (cLock) to yahoo? It's better for my localization.

Bookmarked!
Sent from my jfltexx using XDA Labs

could you upload to mega?

Downloading now to try on my l720 that is gsm unlocked.
Sent from my GT-I9505 using XDA Free mobile app

Great Rom! But after a Reboot I can't acess my sd-card files

Can someone post some screenshots?

cberggold14 said:
Great Rom! But after a Reboot I can't acess my sd-card files
Click to expand...
Click to collapse
Bummer has been fine for me (..so far..)
Can you get me a log please?
@cberggold14 - I also noticed you reported the same bug on AICP 12.1...

Screenshots
https://1drv.ms/f/s!AlomWSgBgPQIrQEOMCjey3QWWVBl
https://android-hubo.de/thread/5111...-8-0-7-1-0-r7-i9505/?postID=116284#post116284
for germany

Develop Bugs

welcome