Develop Bugs

[Q] Update to 4.3 from rooted 4.1.1

Could some one answer a few questions I have on how to go from rooted 4.1.1 to latest build. I have read and DL'd the zip from the "[LEAK] AT&T 4.3 UCUEMJ2 (Root & Knox versions)" thread and was wondering if the the rom can be loaded directly from CM recovery. Is the new bootloader required or optional?
Thanks
Zb
Model
SGH-I747
Android Version
4.1.1
Baseband
I747UCDLK3
Build
JR003L.I747UCDLK3
Recovery
CM 6

ZKornecki said:
Could some one answer a few questions I have on how to go from rooted 4.1.1 to latest build. I have read and DL'd the zip from the "[LEAK] AT&T 4.3 UCUEMJ2 (Root & Knox versions)" thread and was wondering if the the rom can be loaded directly from CM recovery. Is the new bootloader required or optional?
Thanks
Zb
Model
SGH-I747
Android Version
4.1.1
Baseband
I747UCDLK3
Build
JR003L.I747UCDLK3
Recovery
CM 6
Click to expand...
Click to collapse
Have you checked to see if you can get OTA update or update via the latest version of Kies? I was able to update from 4.1.1 to 4.3 with 2 different pre-rooted i747s - one officially via OTA and the other by flashing the same zips you refer to via cm recovery so maybe that answers your question. Before taking the one-way trip to 4.3, however, be sure you are done messing with your phone at the older firmware including unlocking, if required, as you may not be able to go back.

Larry2999 said:
Have you checked to see if you can get OTA update or update via the latest version of Kies? I was able to update from 4.1.1 to 4.3 with 2 different pre-rooted i747s - one officially via OTA and the other by flashing the same zips you refer to via cm recovery so maybe that answers your question. Before taking the one-way trip to 4.3, however, be sure you are done messing with your phone at the older firmware including unlocking, if required, as you may not be able to go back.
Click to expand...
Click to collapse
I wasn't able to update via Kies. If I use CM recovery is there a specific order I need to install with and can I install the new bootloader with CM Recovery or do I need to use odin?

ZKornecki said:
I wasn't able to update via Kies. If I use CM recovery is there a specific order I need to install with and can I install the new bootloader with CM Recovery or do I need to use odin?
Click to expand...
Click to collapse
I'm not aware there is any Odin flashable file for 4.3 yet. You may follow the steps in the link below for manual update via CM...
http://www.smartphonejam.com/2013/1...fficial-android43-i747ucuemjb-ota-update.html
You didn't say if you tried the OTA update? If you want to remain on stock, this is always the safest bet. If you are currently on official 4.1.1 you should be able to get this via WiFi with a valid AT&T sim card in your phone.

Me personally would avoid the official OTA update unless you're absolutely sure you want to keep it. Once you take the bootloader MJB you cannot flash any stock rom anymore unless you have an I747M then you can only flash the official 4.3.
I am on the MJ2 leak bootloader and have no issues, running S3Rx with the MJB modem phone runs great, if something happens I can simply flash anything I want to with Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Me personally would avoid the official OTA update unless you're absolutely sure you want to keep it. Once you take the bootloader MJB you cannot flash any stock rom anymore unless you have an I747M then you can only flash the official 4.3.
I am on the MJ2 leak bootloader and have no issues, running S3Rx with the MJB modem phone runs great, if something happens I can simply flash anything I want to with Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Exactly. I have also stayed away from the official 4.3. I have no idea why so many people around here just insist that their phone be on the latest update. Ok, the ones that had some major issues previously I could see, and yes you're going to have your exceptions whose phones will work just fine on 4.3. But all this 4.3 has done is create even more issues, with no flash-able firmware to go back to when something goes wrong. Some say there is no major reason not to update, but I say that there is no major reason to update, as most never give a reason to why they want to update. I just don't get it, other than these updates have become like new toys, just something new to play with.

shortydoggg said:
Exactly. I have also stayed away from the official 4.3. I have no idea why so many people around here just insist that their phone be on the latest update. Ok, the ones that had some major issues previously I could see, and yes you're going to have your exceptions whose phones will work just fine on 4.3. But all this 4.3 has done is create even more issues, with no flash-able firmware to go back to when something goes wrong. Some say there is no major reason not to update, but I say that there is no major reason to update, as most never give a reason to why they want to update. I just don't get it, other than these updates have become like new toys, just something new to play with.
Click to expand...
Click to collapse
shortydoggg thanks for your post and you actually hit the nail on the head. I can't think of reason I NEED to update, I just get bored and like to play. My warranty is up so voiding that isn't an issue and my 4.1.1 runs just fine, but by playing I learn so I like to play. 4.3 has a few nice features but if prevents the phone from being re-flashed then the risks most-likely aren't worth the benefits. I am just doing my due diligence, researching and asking questions. I really appreciate all the input and advice I get from forums such as this so I can make an intelligent decision.

ZKornecki said:
shortydoggg thanks for your post and you actually hit the nail on the head. I can't think of reason I NEED to update, I just get bored and like to play. My warranty is up so voiding that isn't an issue and my 4.1.1 runs just fine, but by playing I learn so I like to play. 4.3 has a few nice features but if prevents the phone from being re-flashed then the risks most-likely aren't worth the benefits. I am just doing my due diligence, researching and asking questions. I really appreciate all the input and advice I get from forums such as this so I can make an intelligent decision.
Click to expand...
Click to collapse
If you really want to try and want it to be reversible you can use the 4.3 leaked MJ2 bootloader if you decide you don't like the 4.3 stuff you can simply Odin back to stock. But if you use the MJB bootloader you cannot.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Me personally would avoid the official OTA update unless you're absolutely sure you want to keep it. Once you take the bootloader MJB you cannot flash any stock rom anymore unless you have an I747M then you can only flash the official 4.3.
I am on the MJ2 leak bootloader and have no issues, running S3Rx with the MJB modem phone runs great, if something happens I can simply flash anything I want to with Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I was running the same set up with MJ2 OS on MJB modem and the system was running fine until I recently flashed TWRP and SU to root and now the phone keeps booting to TWRP. I've run reset and reboot to system several times and even reflashed the system and modem files to attempt a reset but the same thing keeps happening - booting to TWRP. Will appreciate all steers on how I can rectify this.
Thanks

Larry2999 said:
I was running the same set up with MJ2 OS on MJB modem and the system was running fine until I recently flashed TWRP and SU to root and now the phone keeps booting to TWRP. I've run reset and reboot to system several times and even reflashed the system and modem files to attempt a reset but the same thing keeps happening - booting to TWRP. Will appreciate all steers on how I can rectify this.
Thanks
Click to expand...
Click to collapse
You're on the MJ2 leak bootloader you can use Odin to flash a stock image on the phone if you can get it into download/Odin mode.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
If it won't let you into download mode then format the internal SD card which should erase everything for the most part and flash everything fresh.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

theramsey3 said:
You're on the MJ2 leak bootloader you can use Odin to flash a stock image on the phone if you can get it into download/Odin mode.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
If it won't let you into download mode then format the internal SD card which should erase everything for the most part and flash everything fresh.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
Click to expand...
Click to collapse
Thanks. It does get into download mode. Is there an Odin flashable file for the MJ2 and, if so, where can I find this? I'm wary about flashing an older ROM (e.g. 4.1.1) to avoid any further conflicts as I still have the official MJB modem or can this be done safely?
I've tried clearing the system and reflashing but it was the same result or perhaps I wasn't doing this the right way?

Larry2999 said:
Thanks. It does get into download mode. Is there an Odin flashable file for the MJ2 and, if so, where can I find this? I'm wary about flashing an older ROM (e.g. 4.1.1) to avoid any further conflicts as I still have the official MJB modem or can this be done safely?
I've tried clearing the system and reflashing but it was the same result or perhaps I wasn't doing this the right way?
Click to expand...
Click to collapse
I have been told by very reliable sources that you can Odin to an older version safely regardless of modem as long as the bootloader isn't MJB or MK5 so I am pretty confident it is safe. At this point there isn't too much to loose.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 11:47 PM ---------- Previous post was at 11:42 PM ----------
While you're there I would flash 4.1.1 and do the free unlock. If my laptop charger wasn't broken I would test it for you I would love to unlock my phone.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

theramsey3 said:
I have been told by very reliable sources that you can Odin to an older version safely regardless of modem as long as the bootloader isn't MJB or MK5 so I am pretty confident it is safe. At this point there isn't too much to loose.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 11:47 PM ---------- Previous post was at 11:42 PM ----------
While you're there I would flash 4.1.1 and do the free unlock. If my laptop charger wasn't broken I would test it for you I would love to unlock my phone.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
Click to expand...
Click to collapse
Thanks. Just tried Odining to 4.1.1 but it failed, however. Would you recommend wiping the system in TWRP and booting to download to try again?

Larry2999 said:
Thanks. Just tried Odining to 4.1.1 but it failed, however. Would you recommend wiping the system in TWRP and booting to download to try again?
Click to expand...
Click to collapse
Odining to an older ROM is apparently not an option as this is isn't working. Thankfully, the phone is still booting into both download and recovery modes without difficulty so there is hope. I flashed CWM recovery via Odin thinking the problem may perhaps be with TWRP. However, the result was the same and the phone kept booting back into recovery mode rather than to the system. I also tried to see if was the bootloader so I flashed the MJB bootloader as well as reflashed the MJ2 system zip. The flashings were successful so, at least, it's unlikely to be a bootloader conflict but still the system will not boot.
Will greatly appreciate steers from the community on how to get the thing back working. n Thanks

Larry2999 said:
Odining to an older ROM is apparently not an option as this is isn't working. Thankfully, the phone is still booting into both download and recovery modes without difficulty so there is hope. I flashed CWM recovery via Odin thinking the problem may perhaps be with TWRP. However, the result was the same and the phone kept booting back into recovery mode rather than to the system. I also tried to see if was the bootloader so I flashed the MJB bootloader as well as reflashed the MJ2 system zip. The flashings were successful so, at least, it's unlikely to be a bootloader conflict but still the system will not boot.
Will greatly appreciate steers from the community on how to get the thing back working. n Thanks
Click to expand...
Click to collapse
Finally got it back up and running today. Cant be sure what really led to the soft brick but I simply wiped out everything in TWRP mode and then re-flashed the (MJ2) system, modem and kernel zips. This time it worked, I'd tried the same thing before but without the kernel. Now I'm back to the same configuration as before.

unbrick S3 sgh-i747m

hi
I think I just brick my roger SGH-I747m, I try to bring my phone back to 4.3 from 4.4.2, so I try to flash a 4.3 bootloader from twrp 2.6.3.0; but if give me a error message, then I took the battry out, and I can't start my phone anymore. Is there anything I can do to unbrick my S3 cause the phone is not mine and I will be kill from my sister if I told her I brick her phone. Please help!!!

Was it running stock 4.4.2 before you tried to go back to 4.3? If it was, there is no way to unbrick from 4.4.2 at the moment.
If you need it fixed really fast, a jtag service would be the quickest. Ming Wireless in downtown Toronto provides excellent service.

Actually, there may be hope here. Try the 4.4.2 256mb debrick.img in the debrick thread. Follow instructions there. Also please post there for further assistance.
There have been a couple of bricks recovered on NE4 firmware. As long as you didnt flash the new modem on 4.3 firmware there is hope.

DocHoliday77 said:
Actually, there may be hope here. Try the 4.4.2 256mb debrick.img in the debrick thread. Follow instructions there. Also please post there for further assistance.
There have been a couple of bricks recovered on NE4 firmware. As long as you didnt flash the new modem on 4.3 firmware there is hope.
Click to expand...
Click to collapse
If the OP was on stock 4.4.2 and tried to flash the 4.3 bootloader, would it actually flash the bootloader? If it did flash the 4.3 bootloader, would the debrick still work since the OP would have stock 4.4.2 with a 4.3 bootloader?

If he flashed it via custom recovery, and it wasn't protected by the assert function in the script, yes it could have flashed the older bootloader. Its not the attempt that bricks devices. Something has to actually be written (or corrupted) for it to brick. The only thing that worries me here is the modem. We know we cannot fix a device if it has the new modem flashed onto 4.3 firmware. However, I am not sure about flashing a full 4.3 package. If it does not include the modem, they will have ended up with the same resulting setup. Bust since it was done backwards, I do not know if it will be recoverable or not.
(I hope that makes sense)

How to manually update I747 to 4.4.2

Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
Do I need to go to 4.3 first? Is there a stock firmware for that?
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..

Iz3man said:
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Click to expand...
Click to collapse
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6

audit13 said:
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
Click to expand...
Click to collapse
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?

Iz3man said:
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Click to expand...
Click to collapse
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642

audit13 said:
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
Click to expand...
Click to collapse
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?

Iz3man said:
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Click to expand...
Click to collapse
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.

audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, I have the stock recovery. How do I not flash the radio and boatloads when using the firmware from sammobile?

You cant. You cannot flash another devices firmware. Odin wont let it happen and if it did youd end up hard bricked due to mixed firmware. For example your sbl1, modemst and param partitions (plus others) would be i747 and youd be flashing sbl2, sbl3, rpm, etc from an I747M.
The only thing you could use are the system partition and kernel, nothing else. There are two ways to accomplish this, one is to build a rom from the firmware and flash that. The other is to flash with mobile odin, but that requires root and youd still have to be very careful.
Another priblem I see you encountering is you cannot run 4.4.2 without 4.3 or newer firmware. It will not boot otherwise.
You need to go to the General section and follow one of enewman17's tutorials to get to either 4.3 or 4.4.2. Personally, I dont see any other way you will be able to accomplish it.

audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, based on Doc holiday, and others they say It cannot be done and from my experience I beleive them.

Thank you,
It's very difficult to do this when others are giving bad advice.
So for the record, cannot flash i747m firmware to i747.
Thanks!
The annoying part here is I can do it with my m7, I just flashed the Dev edition onto my Bell m7 with no problems.

All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out!
Now, back on the problem at hand... if you want to be running the latest 4.4.2 kk, you will have the option to use the OS (/system and kernel) from either the I747 or I747M firmware. But first you must fully update to a minimum of the 4.3 MJB firmware for the I747. Once you have this running for your base firmware/bootloader, you can then run the Bell or AT&T (4.3 or 4.4.2) system. (I hope this is making sense!)
So first, update the full 4.3, MJB, firmware via Odin. (Theres a thread in General with the file, ill post the link in a min).
If you want to update to 4.4.2 firmware, you can then follow enewman17's tutorial to do so via OTA.
You can then either stay with that, or use Mobile Odin to flash ONLY the system and kernel from the Bell firmware.
Let me know if any of that needs better clarification! Also let us know what your ultimate goal is. From the options you have, where do you want to end up?
---------- Post added at 10:32 AM ---------- Previous post was at 10:26 AM ----------
Ok, here are some links.
Stock MJB firmware (flash in Odin)
http://forum.xda-developers.com/showthread.php?t=2722660
enewman17's thread for updating to 4.4.2 (high success rate)
http://forum.xda-developers.com/showthread.php?t=2789917
Official, unmodified 4.4.2 OTA
http://forum.xda-developers.com/showthread.php?t=2788012
After updating with the 4.3 firmware, you can first try using the official ota to update. Then, if that fails you can go to enewman17's thread and try his method.

DocHoliday77 said:
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out! ]
:thumbup::beer::sly:
err on the side of kindness
Click to expand...
Click to collapse

reverting to 4.1.1

i have the s3 att on a 4.4.4 CROM. the baseband says ...LK3. can i use any guide using odin to go back to 4.1.1 stock unrooted and then use OTA updates to get the latest baseband/bootloader/modem? just want to make sure before i do it. i hear this is the safest way and i want to make sure i have met the requirements before i do it so i dont end up having a brick! (not sure if it matters but i have never used OTA updates before)
thanks in advance.

Is your bootloader also the lk3? If the modem and bootloader are lk3, you can use Odin to flash back to stock using firmware from sammobile.com.

Ok, I'm on a similar boat. I tried several AOSP based ROMs, and while I like most of them a lot more than stock touchwiz, they all present the same problems:
- Camera stops working sometimes and I have to reboot device;
- Camera won't record videos in 1080p, even when it's selected in the settings;
- Cannot make video calls on Skype longer than 5 seconds before the call drops;
- Disconnecting a bluetooth media device while music is streaming causes sounds to stop working;
- Tap to pay doesn't work at all;
So because of these problems, I want to go back to stock . My phone is the AT&T version. Currently I'm running Carbon Rom with KitKat 444. The baseband version is I747UCUFNJ1. The latest version of the stock ROM available on sammobile is:
Version: Android 4.1.1
PDA: I747UCDLK3
CSC: I747ATTDLK3
MODEM: I747UCDLK3
Would I be able to revert my phone back to stock with Odin? If not, what would I have to do to revert? Am I stuck with custom ROMs?
I'm pretty new to this so I'd appreciate anybody's help.

If your bootloader and modem is the lk3, you should be able to Odin back to stock 4.1.1.

Ok, how do I find out if they are? And if they are not, do I have any other options?

Download and install the Samsung Info App from the Playstore. Report back here with your bootloader and modem.

audit13 said:
Download and install the Samsung Info App from the Playstore. Report back here with your bootloader and modem.
Click to expand...
Click to collapse
Ok, according to the Phone INFO *Samsung* app:
Baseband Version:
I747UCUFNJ1
Bootloader Version:
I747UCUFNJ1
There was no other modem info reported besides this
Modem Board:
MSM8960

someone correct me if i'm wrong.you cannot downgrade bootloader or it will brick. there is no stock rom for NJ1. this link will take you to a stock based 4.4.2 ROM which is safe to flash with the NJ1 bootloader/modem.
http://forum.xda-developers.com/showthread.php?t=2848080
"all i can really do , is stay out of my own way and let the will of heaven be done"

mrrocketdog said:
someone correct me if i'm wrong.you cannot downgrade bootloader or it will brick. there is no stock rom for NJ1. this link will take you to a stock based 4.4.2 ROM which is safe to flash with the NJ1 bootloader/modem.
http://forum.xda-developers.com/showthread.php?t=2848080
Click to expand...
Click to collapse
Well, that's a bummer if I can't restore stock rom to the phone. So there is absolutely no way of safely downgrading the booatloader?

nope. it will brick your phone if you try to downgrade your bootloader.
"all i can really do , is stay out of my own way and let the will of heaven be done"

Have you tried CM-11-based or TW-based ROMs?

mrrocketdog said:
someone correct me if i'm wrong.you cannot downgrade bootloader or it will brick. there is no stock rom for NJ1. this link will take you to a stock based 4.4.2 ROM which is safe to flash with the NJ1 bootloader/modem.
http://forum.xda-developers.com/showthread.php?t=2848080
Click to expand...
Click to collapse
I tried to push that ROM the phone using adb to flash it with ClockWorkMod, but the file is 1.7 GB and the phone always shuts itself down during the push process... So I wasn't able to try that. Also, the instructions say you're supposed to be on UCUFNE4. Are you sure it's safe to flash it on I747UCUFNJ1?
audit13 said:
Have you tried CM-11-based or TW-based ROMs?
Click to expand...
Click to collapse
I have tried CM11 and Carbon ROM, which is CM based, both have all the same problems. I haven't tried TW-based ROMS. Do you have any suggestions?

What do you mean by the phone shuts down? Did you try copying the ROM to a microSD card?
Did you notice any bootloader or modem files in the S3Rx 4.0 (11-9-14) ROM? It may not include a modem or bootloader. In step 1 of the flash process, it says "AT&T I747 users should update bootloaders and modem to NE4 http://forum.xda-developers.com/gala...pdate-t2808654 I747M and T999 users need to be on 4.3 firmware or ROM will not boot. "

the link i posted is TW. post #1306 claims is o.k. to flash with UFNJ1.
did not see any mention of bootloader or modem in changelog or in list of 'extra' features.
"all i can really do , is stay out of my own way and let the will of heaven be done"

audit13 said:
What do you mean by the phone shuts down? Did you try copying the ROM to a microSD card?
Did you notice any bootloader or modem files in the S3Rx 4.0 (11-9-14) ROM? It may not include a modem or bootloader. In step 1 of the flash process, it says "AT&T I747 users should update bootloaders and modem to NE4 http://forum.xda-developers.com/gala...pdate-t2808654 I747M and T999 users need to be on 4.3 firmware or ROM will not boot. "
Click to expand...
Click to collapse
I reboot the phone in ClockWorkMod recovery. Then I go to the command prompt and type:
Code:
adb push S3Rx_UCUFNE4_AROMA_11-9-14.zip /sdcard/
It starts pushing the file to the phone, but after a while, the phone screen goes black, and I get a "Protocol failure" on the command prompt. After this the power button no longer works, I have to do a battery pull for the phone to work again. The phone has 10 GB of storage left so it didn't run out of space. The USB chord is brand new so I don't think it's that either. It worked fine before when I pushed other smaller roms.
In another question, would this process allow me to downgrade the modem and restore stock rom?
http://forum.xda-developers.com/showthread.php?t=1831898

i am pretty sure that since youre on MJ1 , your bootloader and modem have to match.
"all i can really do , is stay out of my own way and let the will of heaven be done"

Did you try flashing the card from an external microSD card?
AT&T never released a stock ROM for the i747 beyond 4.1.1 afaik; therefore, you cannot get back to stock unless you flash an OTA ROM that has been compiled for flashing in Odin.
I do not recommend mixing and matching bootloaders and modems as a mismatch may result in a hard brick.
Downgrading only the modem will not allow you to flash back to stock.

audit13 said:
Did you try flashing the card from an external microSD card?
Click to expand...
Click to collapse
I haven't tried flashing from external microSD card as I don't have one.
audit13 said:
AT&T never released a stock ROM for the i747 beyond 4.1.1 afaik; therefore, you cannot get back to stock unless you flash an OTA ROM that has been compiled for flashing in Odin.
I do not recommend mixing and matching bootloaders and modems as a mismatch may result in a hard brick.
Downgrading only the modem will not allow you to flash back to stock.
Click to expand...
Click to collapse
So you're basically telling me I'm stuck with custom roms unless I find a 4.4.2 OTA ROM I can flash with Odin (which doesn't appear to exist)?
---------- Post added at 05:24 PM ---------- Previous post was at 05:01 PM ----------
Would it be safe to try this:
http://forum.xda-developers.com/showthread.php?t=2788357
Even though I'm on I747UCUFNJ1 and not on I747UCUFNE4?

Once you upgrade to the 4.3 or newer bootloader on the i747, you are stuck with either custom ROMs or OTA ROMs that have been compiled for flashing in Odin or CWM/TWRP.
You can try flashing the NE4 ROM because it doesn't appear to include a bootloader or modem. The first post says "Prerequisites include a minimum of a 4.3 bootloader and modem.
If you are not on the official 4.4.2 bootloaders and modem then you will need to flash ktoonsez kernel."

Thanks audit13 and mrrocketdog for all the help. I was able to get the AROMA rom installed on the phone. All functionalities lost with AOSP ROMs are back working so that's a plus. Still can't get updates OTA updates but this phone is probably not gonna have any new ones. Still hopeful that lolipop based AOSP ROMs fix the problems I had, but I'm not holding my breath.

Help me downgrade my galaxy s3 i747

Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks

mango man said:
Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks
Click to expand...
Click to collapse
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.

Thanks for a very helpful reply. I m going to follow your instructions. Will soon replay. Thanks again.

dawgdoc said:
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.
Click to expand...
Click to collapse
Okay got Samsung phone info app.
Boot loader version -------I747UCDLK3
Baseband version -----I747UCDLK3
And please explain LATEST NE4 BOOT LOADER.
Thanks

You are currently running the LK3 bootloader and modem. If I am not mistaken that's a pretty old one (original?). You will have to update to NE4 or newer firmware before you can flash any of the newer roms. They will not boot in the older ones.
Your firmware is actually the only one available for download so I recommend flashing it via Odin and factory resetting. Then update using the Software Update option in Settings > About Device.
You can download your LK3 firmware here: http://www.sammobile.com/firmwares/database/SGH-I747/
You may have to run Software update several times to fully update.
That is probably the safest and easiest course you can take.
After that, flash the latest custom recovery of your choice, then flash the rom you want.
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
BTW, after flashing the LK3 firmware, you might want to consider using the free Sim unlock method. (Should be pretty easy to find).
Once you update past 4.3 you can no longer use it. It will allow the device to be used on other carriers networks, which can be beneficial if you ever want to sell it or switch carriers.
Sent from my SGH-T999 using Tapatalk

What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)

dawgdoc said:
What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)
Click to expand...
Click to collapse
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks

mango man said:
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks
Click to expand...
Click to collapse
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.

I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk

dawgdoc said:
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.
Click to expand...
Click to collapse
DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thanks men for quick response.
now I m fully confused. Don't know what to do. because I don't want to stuck on this battery enemy rom. (Aokp kitkat. Custom rom )
I am not clear about boootader version (PHONE INFO SAMSUNG APP SAYS ITS i747ucdlk3 ) but I know when got this thing. It was android 4.1.1 . Which I have back a backup. As per I am out of att network and I can't get OTA,s so I don't need to revert to 4.1.1 backup. I think I have to find out 4.3. For my device. So kindly please inform me if some one knows about . Iwill be very thankful to u people.
Again thanks

DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this while searching online. Please tell me if it is helpful for.me.
http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/

Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yup! I think it is. Will try . Thanks

mango man said:
Yup! I think it is. Will try . Thanks
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)

DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)

mango man said:
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)
Click to expand...
Click to collapse
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.

dawgdoc said:
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.
Click to expand...
Click to collapse
Thanks **** I need to be extra careful before taking any step. I am going to collect all relesed OTA,s. By now I onky need the links for ota. Thanks

Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this site having all ota, s . And is linked to the enewman17.
www.androidayos.com/samsung-galaxy-s3-stock-firmware-2/

Lol, I guess they thought they had to provide it somehow! It's a shame they didn't at least acknowledge enewman17 in their article there, but at least they direct linked to his thread.
Anyway, good luck! And if you have any other questions come up, let us know.
Sent from my SGH-T999 using Tapatalk