Develop Bugs

[Kernel][3.10.94]tiltkernel - v1.6 - Elephone P8000

I present tiltkernel!
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
It's based on @BlueFlame4 super work, with something extra.
Updated to Linux 3.10.94
dt2w and Pocketmod
ThunderQuake Engine 1.0 - Vibration Intensity Controller for MTK vibrators
Secured
init.d support
CFQ and BFQ IOScheduler
CIFS and NFS
Interactiveplus, Pegasusq and stock CPU governors
westwood and cubic TCP congestion control
Removed various debug and logging stuff
Compiled with latest UBERTC 5.3 toolchain and Cortex-A53 optimizations
Dynamic Fsync Control
mmc: disable crc check for 30% extra performance in IO
Ramdisk
MTK: removed HUGE trail of MTK kernel logging
Increased READAHEAD to 1024 for better I/O performance
And lots of other kernel options...
Source: https://github.com/tiltkoko/android_kernel_elephone_p8000.git
Changelog:
Code:
v1.6:
* Linux 3.10.94
* Updated toolchain
* Default to NOATIME and NODIRATIME for FS performance improvement
* 100+ other patches. Look at the source.
* Fixed fingerprint sensor
* Improved wifi
v1.5:
* Fixed touch zoom bug
* Fixed ThunderQuake Engine
* Removed 1.5 GHz step
v1.45:
* updated to 3.10.93
* Dynamic Fsync Control
* mmc: disable crc check for 30% extra performance in IO
* Tweaked IO scheduler for better performance
* NFS
* BFQ default IO scheduler
v1.4:
* Fixed "youtube" bug
* kernel update fixes and some network patches
* Updated with Eragon init.d fix.
* ARM Cortex-A53 compiler optimizations
v1.3:
* Updated to the new Elephone sources
* Increased VM_MAX_READAHEAD to 1024 for better I/O performance
* Changed to UBERTC toolchain and O3 optimization
* Added Pegasusq CPU Governor
* Some other fixes
v1.21:
* Removed multicore scheduler.
* Added interactiveplus cpu governor
* Fixed some really stupid stuff introduced in v1.2
v1.2:
* Huge update to 3.10.92!
* Disabled some more debug stuff.
* Fixed button wake up.
v1:
* Initial version.
Install:
Rashr or fastboot
Props:
@BlueFlame4
@varun.chitre15
skeleton1911 for Eragon
showp for DT2W
and XDA!
Whats next:
Think it's stable now, so expect new version in a while
I am on #elep8k on freenode IRC network if you want to say hello!

FAQ
F.A.Q
Q. How to use the features?
A. Most of the features are controllable via TricksterMod app
Q. How to use ThunderQuake Engine?
A. With ThunderQuake Engine you can control vibration intensity at hardware level. There are 7 levels of intensities supported
Using Terminal Emulator/ADB shell use following command
Code:
echo "your-value-here" > /sys/kernel/thunderquake_engine/level
Valid values: 0-7

Question:
Is it real 1.5Ghz or is it "1.5Ghz", which actually runs at 1.3Ghz but at higher volts (as it happens in most Mediatek devices when one tries to overclock)?

TricksterMod and benchmark scores indicate 1.5Ghz. That's good enough for me.

Stevethegreat said:
Question:
Is it real 1.5Ghz or is it "1.5Ghz", which actually runs at 1.3Ghz but at higher volts (as it happens in most Mediatek devices when one tries to overclock)?
Click to expand...
Click to collapse
This was already discussed in my kernel thread. They're real, because the kernel already supports it and we just unlocked the frequency. Also benchmarks indicate that it's real.

NTFS is not supported.
NTFS formatted SD-card is not mounted in system at all.

Thank you very much for your kernel I'm too happy .
I installed TricksterMod app and set dt2w , BFQ IOScheduler , westwood TCP and ZRAM .
How do I set NTFS and CIFS and Multicore scheduler ?
You may also upgrade your kernel to version 3.10.92 , please ?

BlueFlame4 said:
This was already discussed in my kernel thread. They're real, because the kernel already supports it and we just unlocked the frequency. Also benchmarks indicate that it's real.
Click to expand...
Click to collapse
Sorry, last I remember it was 30% slower than MT6752 (which basically would show no difference than the 1.3ghz clocks).
Maybe I'd have to run Phoronix's Linux workload via chroot if the results are as inconclusive as I remember them. Phoronix's benchs show things like throttling with surgical precision (it only cares about load, not mhz, so when there's sudden gap in performance that would be throttling). Of course I'd have to get the phone in my hands first (my wife rarely let's me to "pet" it anymore ).

OsitKP said:
NTFS is not supported.
NTFS formatted SD-card is not mounted in system at all.
Click to expand...
Click to collapse
The ROM has to support it as well and stock doesn't But a 3rd party app would do it as well, AFAIK.

I do not have a microSD card yet (ordering one soon). What do work with SD-cards, fat32? ext4?
@stefano91av Multicore scheduler is built in, so nothing to do there.
The kernel sources has a lot of backports etc, especially in the arm code. So it's not that easy to get to the latest kernel. I will get there eventually, just give me some time.
I am not an expert at this stuff, learning as I go.
Has someone played with ThunderQuake?

tiltkoko83 said:
What do work with SD-cards, fat32? ext4?
Click to expand...
Click to collapse
FAT32 definetely does.

My p8000 om eragon 5. Freeze just after reboot.
Flashed it with fla****y. Tryid booth versions.
All version of Blues kernel works without problems.
Any suggestion?

wierd micbanand..
I am still on eragon 4. My and Blues kernel is using same source, so should be no difference. Tried with Rashr?
Finished with updating to 3.10.92. Uploading after I have tested it a few hours...

Uploaded new kernel with 3.10.92 added. There are so much debug stuff in the sources it's crazy. Found some hidden stuff when I updated..
Now I am tired. Was a lot of work..

Thanks. But freezes. Reboots frezes. Tryid all 3 kernels. And allso updated to eragon 5,5
This time flashed with Rashr.

Now I'm trying v1.21.
With v1.20 there were jamming in the videos of facebook when I received messages from whatsapp . In addition, the score was AnTuTu 29000

heh that bad. I did some stupid stuff there.
I got almost 35000 with 1.21.
Will try to improve on the wakeup lagg tomorrow.

I too can confirm that flashing this kernel over Eragon 5.6 results in a bootloop. Well, it's not exactly a bootloop, since the phone finishes botting and you can also unlock the screen, but less that a minute it restarts, and this happens over and over again. I tried rebooting the phone into safe mode before it reboots itself, but in safe mode it also reboots suddenly.

wierd. Every kernel I have build has booted fine for me.
New version with updated sources ++ coming later tonight.

Waiting for new kernel

Related

I don't like to write big first posts, so lets cut to the chase:
This kernel features:
* Completely 100% warning free kernel - clean as butter
* Compiling fixes from showp1984 (awesome job)
* Compiling fixes from riemervdzee (awesome as well)
* Some merges from TripNRaVer
* CRC32 library updated
* Simple I/O scheduler as default and optimized for flash devices
* Several hotplug patches for maximum stability - hotplug is onlining/offlining CPU's on demand
* Maximum debug stripped out without ruining Wi-Fi module
* fsync() calls disabled for maximum I/O throughput
* CPU frequency transitions latency reduced from 300 * 1000 to 10 * 1000
* Partitions properly mounted in the ramdisk for maximum performance
* VM parameters tuned for battery and performance enhancements
* Lowmemorykiller backported from 3.4 kernel - this should help with memory management
* Memory system calls improved using glibc version
* Ondemand governor is the default and is tweaked for my personal prefered values for battery and performance improvements
* Some other minor tweaks and optimizations available to be seen on my github repository
* GPU overclock interface
* Companion core max frequency interface
* Custom lowmemorykiller driver to force the system to have 250-300 memory ram available
* Based on the latest 2.17.401.2 source
Changelog:
r21:
* Major refactoring of the GPU OC interface. Now you just choose whatever max frequency you want the GPU to scale to instead of setting the whole array of frequencies. For example echo 550 > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc. This also scales the voltage used based on what GPU clock you choose. My One X freezes if I set anything => 650Mhz. Have fun.
r20:
* GPU overclock interface. Now you're able to choose which frequency you want your GPU to run:
To check the frequencies just do this: cat sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
The default clocks are: 416 416 416 380 332 285 234.
To change to other clocks just do this: echo X X X 380 332 285 234 > sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
Substitute the X with 484, 520, 550, 600 or 700 if you'd like. Be careful that on higher clocks the device might get extremely hot and unstable. You're on your own.
* Added interface for you to choose which max frequency you want the companion core to run:
echo X > sys/devices/system/cpu/cpu0/cpufreq/cpu_lp_max
substitute the X with 100, 200, 300, 400 or 500. 500 is the default value.
* Added some custom driver changes to lowmemorykiller to force the device to have at least roughly 250-300 mb ram free - we don't want the device to run out of memory and we know how memory hog Sense is.
* Fixed CPU voltage interface with the correct values
r18:
* Add back UV interface
* Refactored CPU frequency table: now it goes from 100Mhz to 1500Mhz in 100Mhz increments
* Adjusted memory bandwidth according to the new frequency table
* Tweak ondemand governor sampling time - now its the same as the cpu frequency transition latency
* Now all cores scale to 1500Mhz - previously single core mode scaled to 1500Mhz and when in multi-core it scaled to 1400Mhz. I think faux discovered this fix, so if he did, credits to him
r17:
* Complete rebase into the new 2.17.401.2 sources
r13:
* Merge latest HTC One X sources
* Fixed lots of HTC derps again in the newer source merge
* Some performance improvements on the ramdisk
r12:
* Attempt to fix most of the screen flicker. Like I said on the previous post its mostly fixed but its still partly visible on the lowest brightness. This is what I can see on my device, but there are 6 or 7 different panels around so I can't predict whats going to happen with all the users
* Enable fsync() calls back to the tree. If you enjoyed the extra IO speed I created a module_param where you can enable/disable fsync whenever you want (echo N to disable).: echo Y > /sys/module/sync/parameters/fsync_enabled
* Revert one of my previous cleanup patches that was causing some extra mAh usage during idle
* Some ramdisk tweaks
r10:
* Add userspace voltage control. You can control the voltages via my own app or via terminal commands
r9:
* Revert back to stock Ondemand because I wanted to enable Two-phase algorithm that will possibly increase battery life (thats the goal for the algorithm)
* Decreased Ondemand up_threshold from 95% to 90%
* A little Ondemand tweak explained here: https://github.com/franciscofranco/One_X-2.6.39.4/commit/6cf7e62bb928e3d08a74dbdf998be69703ecf852
* Cleanup of some of cpu-tegra.c routines explained here: https://github.com/franciscofranco/One_X-2.6.39.4/commit/27caf295bcec946e92cfac6486286130d5476edc
* smp.c: fix ARM RCU stalls
* A little patch to nohz from 3.0.31
* Little config cleanup
r8:
* Fix shutdown bug where it restarted instead of shutting off
* Re-worked baseband-xmn-power2.c cleanup - now airplane doesn't restart the device and the odd signal issues should be fixed
* Re-worked tegra_aic3008.c (responsible for the sound) and now listening to music should use less power (not confirmed, just an assumption)
* One or two extra cleanups
r7:
* I present you the first HTC One X completely warning/section mismatch/error free with over 100 patches (maybe more) where I cleaned all HTC's derp. Check my repository to see what I've been doing
r6:
* Some fixes from TripNRaVeR - awesome job be sure to send him a beer or two
* Lots of warnings, ISO C90 warnings, unused variables and other ton of fixes on top of HTC source (that is bloody derped)
* All the fixes are visible on my github repository
r5:
* Ramdisk rebased to stock 1.29.401.11 (it should boot on every rom now)
* Added native init.d support for the ramdisk
* Added previous ramdisk optimizations
* Enable ARCH_POWER to use arm_cpu_topology power management features.
* Added 18 kernel patches from NVIDIA
r4:
* Proper compiler flags (I accidentally built for cortex-a8 last build)
* Allow CPU-supported unaligned accesses - should give a tiny bit of extra performance
* Remove htc_print_active_wake_locks - from TripNRaVer
* Remove HTC pokecpu - from TripNRaVer
* Remove htc_util - from TripNRaVer
* Fix ARM: Move leds idle start/stop calls to idle notifiers from previous process.c cleanup
* cpufreq: ISO C90 forbids mixed declarations and code - from TripNRaVer
* Revert "Decrease minimum VDD allowed for CPU from 850mV to 800mV." - I believe this was causing the extra screen flicker on lowest brightness and some users report of stuttering music while screen off
* CFS scheduler tweaks on the ramdisk for maximum UI responsiveness and smoothness - if you repack this kernel for other ramdisks you'll lose this tweaks
* Some config cleanups for better speed
This is a 1.29.401.7 ramdisk so you'll most likely have to repack it if you're running a 1.29.401.11 rom, so don't bother crying at me for non-booting issues.
r3:
* More fix-ups from showp1984 (danke you)
* Move x86_64 idle notifiers to generic - From Todd Poynor. This allows us to use the idle_notifiers interface for further patches
* Cleanup cpu_idle call from process.s
* Few compiler flags added
* config cleaned up a little bit
* Westwood+ TCP Congestion algorithm by default - should give an extra boost to internet speed and smoothness
* calibrate.c (loops_per_jiffy calculation file) updated to its latest version from Linux mainline
* A few ramdisk tweaks and cleanups
r2:
* Another round of fixes from riemervdzee (send him a beer sometime)
* Add ARM cpu topology definition
* Add Simple IO scheduler and made it default
* Ondemand governor updated to my 3.0.8 Galaxy Nexus branch
* Some MMC power management fixes
* Decrease minimum VDD allowed for CPU from 850mV to 800mV.
* Some PCIE patches from NVIDIA's repo
* Some other small patches available on my github
Downloads:
Kernel: http://minooch.com/franciscofranco/One X/
Modules: http://minooch.com/franciscofranco/One X/modules/
franco.Kernel updater app: https://market.android.com/details?id=com.franco.kernel
franco.Kernel updater app from AndroidPit: http://www.androidpit.com/en/android/market/apps/app/com.franco.kernel/franco-Kernel-updater
Instructions:
1 - Enter this command: fastboot erase cache
2 - Flash the boot.img on fastboot with: fastboot flash boot boot—rX.img (replace X by the release number)
3 - Reboot to recovery from the fastboot menu (before booting to system for the first time) and flash the modules package
?? - The device didn't boot and you're crying in the corner? Try this: http://forum.xda-developers.com/showthread.php?t=1647398
As always I'm not responsible for thermonuclear war on your device, so you're on your own
Source: https://github.com/franciscofranco/One_X-2.6.39.4
franco.Kernel updater app features:
* Added support for my HTC One X kernels (international Tegra 3 version ONLY) with the following features:
* Downloads boot.img and modules directly from the FTP
* CPU tools with the ability to change governor parameters and mess with the default governor and CPU frequencies
* Full control over the 4 cores - you can chose how many cores you want your device to use
* Live watch over the 4 cores by the second - you can see the device turning on/off the cores live
Enjoy and provide feedback please

Just in case.

Good to see another custom kernel so fast

franciscofranco nice to see you here!

mike1986. said:
franciscofranco nice to see you here!
Click to expand...
Click to collapse
Glad to be around here, hope to do good things for this device

Kernels being released left right and center, love it. Flashing asap.
Sent from my HTC One X ARHD 5.2.0 using Tapatalk 2

Thanks franciscofranco. I am going to try this kernel now.

Yessss Try it out in some Minutes ^_^

I think I should give it a shot/go!

YESSS ATLAST!!!
Going to flash immediately

I'm french, I don't know what to choose as kernel

Waiting for some.feedbacks first
Sent from my HTC One X using XDA

I got stuck on HTC screen..
Will try clearing cache and post..
EDIT: No go for me.. Still stuck, will revert to normal kernel.. I did everything as it should, of course..

the_maker said:
i got stuck on htc screen..
Will try clearing cache and post..
Edit: No go for me.. Still stuck, will revert to normal kernel.. I did everything as it should, of course..
Click to expand...
Click to collapse
same as here

Same for me got stuck on htc screen !

i got stuck on htc screen..
Will try clearing cache and post..
Edit: No go for me.. Still stuck, will revert to normal kernel.. I did everything as it should, of course..
Click to expand...
Click to collapse
Me too ...
RoM leedroid 5.1

the_maker said:
I got stuck on HTC screen..
Will try clearing cache and post..
EDIT: No go for me.. Still stuck, will revert to normal kernel.. I did everything as it should, of course..
Click to expand...
Click to collapse
Same here (on ARHD).

Stuck at HTC screen here as well. The boot.img is only 3mb while all the other I've tried so far are 4.xmb

the_maker said:
I got stuck on HTC screen..
Will try clearing cache and post..
EDIT: No go for me.. Still stuck, will revert to normal kernel.. I did everything as it should, of course..
Click to expand...
Click to collapse
hasan_abeer said:
same as here
Click to expand...
Click to collapse
WYPANG said:
Same for me got stuck on htc screen !
Click to expand...
Click to collapse
me too, but I flashed the bricked kernel before.
I try to reflash lee´s rom/boot and try again.

erasing cash applied and flashing is ok now with command:
fastboot erase cache
testing begining now

ChronicKernel for T-Mobile Samsung Galaxy S4​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now likely void.
*
* I am not responsible for bricked devices, dead SD cards,
* spontaneous combustion, or any other host of cosmic penalties
* which may befall you, your family, or your phone.
*
*/
Here is a initial kernel for AOSP/TW. It has all the features you would expect from a modded kernel, CPU OC, GPU OC, more CPU governors, Undervolted, Underclockable, GPU OC CPU L2 OC, and linaro -o3 optimizations
Click to expand...
Click to collapse
Screenshots
Requirements
* Rooted (obviously)
* I use CyanogenMod as my daily, so i don't test the TW version much..it should be fine though.
Installation
1: Place zip on sdcard
3: Reboot into recovery
3: Clear cache and dalvik cache
4: Flash zip
5: Reboot
6: If desired edit the init script at /system/etc/chronic-config.sh to suit your needs
7: Profit
ChronicKernel
* All-in-One kernel for all qualcomm variants (AOSP/CM only)
* Compiled with linaro
* GPU OC to 627 Mhtz (450Mhtz default - configurable though chronic-config.sh init script)
* CPU OC to 2322 Mhtz (1890 Mhtz default)
* CPU L2 cache overclocked to 1.3Ghtz
* Raised the low/med/high values for GPU governor one step each
* Added many I/O Schedulers
* Some scheduler performance tweaks
* Added CPU Governors intelidemand, wheatley, lagfree, linoheart, smartassH3, badass and smartmax (Default gov = intellidemand)
* Dynamic Fsync
* F2FS Support
* User adjustable CPU uV
* frandom support
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* USB fast charge (disabled by default - configurable though chronic-config.sh init script
* Patched to Linux 3.4+
May-7
* Added back patch to ramdisk for PACMAN rom.
* Added F2FS support
* Synced ramdisk with CM
April-23
New Release v3.0 All-In-One AOSP_KK4.4 Kernel!
* Sorry for the long delay. Got burnt out on android for awhile and got some new toys as well so was busy
* All the needed updates to kernel and Ramdisk since last release and to comply with CM"s new all-in-one rom build,
because of this we can now use one flashable zip for all qualcomm variants now. I added the auto-loki patching from
CM's rom zips so loki should be done for you. let me know if you have any issues.
* Updated kernel to 3.4.82
* I'm sure there are a few small fixes I forgot since last release but basically you can expect what you did with the last release just up to date.
Dec-24
New Release v2.4 for AOSP Android KitKat 4.4! (TW to follow soon)
Changes since v2.3:
* Got rid o dcvs governor as it never worked
* Updated to offical Android 4.4.2/CM-11 Kernel source, changes include:
* We are now using the msm2 gpu driver not msm.
* Updated WiFi Drivers
* Updated Sensor drivers
* Many changes to the framebuffer and vidc driver
* Linux 3.4.75
And as always the ramdisk is synced with CM as of time of compile
Oct-28
* AOSP-JB4.3: Tagged v2.3.3 (maintenance update)
* AOSP-JB4.3: Fixed issue with latest ROM builds
Oct-26
* AOSP-JB4.3: Tagged v2.3.2 (maintenance update)
* AOSP-JB4.3: Merged all the upstream commits from CM, should help with stability
* NOTE: If your colors are off with the display. Its because your ROM hasn't been updated to latest display drivers, ask your ROM developer to update their ROM.
Oct-20
* Common: Updated to Linux 3.4.66
* Common: Added Faux123's Simple GPU governor
* Common: Fixed compatibility with PAC
* AOSP-JB4.3: Merged upstream changes for compatibility with latest CM nightlies
* TW: Tried to fix issue with LPM mode (charging while off)
Oct-6
* Bumped AOSP to v2.2 and TW to v1.2 respectivly
* Common: Fixed issue across all custom S4 kernels where the Governor is only applied to online cpu cores. They are now set regardless
* Common: More aggressive L2 Overclock, bumped max L2 freq by 100 Mhtz and have a more aggressive scaling of the L2 freqs
* Common: Updated to Linux 3.4.62
* AOSP-JB4.3: a few (minor) upstream changes
Sep-5
* AOSP-JB4.3: Merged over 200 commits from CM to bring in sync, No other changes, although seems performance is a little improved
Aug-24
* General: initial release ot the TW/GE kernel, refered to as TW-JB4.3, this is the same as the TW (now known as TW-JB4.2) just compatible with GE roms
AOSP-JB4.3
* AOSP-JB4.3: Synced Ramdisk with CM, latest nightlies should work now
* AOSP-JB4.3: Fixed a bad merge in the last version related to I/O scheduling
* AOSP-JB4.3: Added official Samsung exFAT support (thanks ktoonsez for original commit)
* AOSP-JB4.3: Updated to Linux 3.4.59
* AOSP-JB4.3: Tagged v2.1
AOSP-JB4.2
* AOSP-JB4.2: Added official Samsung exFAT support (thanks ktoonsez for original commit)
* AOSP-JB4.2: Updated to Linux 3.4.59
* AOSP-JB4.2: Tagged v2.1
TW/TW-JB4.2
* TW: Some cleanup to try and make it more stable
* TW: Added official Samsung exFAT support (thanks ktoonsez for original commit)
* TW: Updated to Linux 3.4.59
* TW: Tagged v1.1 and will be known from this point on as "TW-JB4.2"
TW-JB4.3 - TW/GE
* TW-JB4.3: Initial TW/GE kernel v1.0
Aug-16
* AOSP-JB4.3: Maintenance update - Synced with upstream CM kernel at time of compile - glitches should be gone
* Note: sorry for the delay. i was busy getting 10.2 booting on pyramid/glacier/holiday
* Took the version number out of the OP title as its not the same across all platforms
Aug-4
* AOSP-JB4.3: Added AOSP 4.3 kernel, has all the updates from CM's kernel as of this date
* AOSP-JB4.2: Sync with CM. a little clean up
* TW: TW kernel is now out of RC and v1.0, Merged a few things from the AOSP-JB4.3 kernel
* There were a good amount of updates that are kinda hard to explain. if you want more details check my github
Old Changelogs
July-20
* TW: RC2 release
* TW: tried to fix exFAT support, please let me know
* TW: Fixed an overlook that was causing the GPU to stay at a higher freq then normal
July-18
* Fixed a few little overlooks on my part in the TouchWiz beta1. Here is RC1
July-17
* inital TW build, still beta but should work fine just might have a couple things enabled (I/O schedulers that dont work or shouldnt be)
July-14
* Fixed Color temp settings not showing in Advanced Settings
* Couple tweaks to fastcharge cherry-picked from ktoonsez's kernel
* Merged JFA source
* All CM changes merged
* Added option to configure CPU OC from chronic-config.sh
* Fixed a race condition between chronic-config.sh and init.qcom.post_boot.sh setting governor
* Updated to Linux 3.4.52
* Fixed a type-o in chronic-config.sh that might have prevented dynfsync from being set to the desired setting
* Initial support for the Sprint variant
* General cleanup
July-2
* Reworked the way the config script works. it now sets gov correctly. it was renamed to chronic-config.sh and moved to system/etc/
* A few upstream updates
June-30
* Maintenance update
* Merged all upstream CM changes, should work on latest nightlies now
June-26 Stable Release
* Over 100+ upstream commits, like vidc etc, CHECK HERE for details
* Updated to MFx source/google sources
* small bugfix to screen off max gov
* wakelock fix (upstream)
* Updated to Linux 3.0.50
* Few misc bugfixes
** Honnestly the changelog doesnt do the update justice. CHECK HERE for details
June-18
* Upstream: Kernel source updated to MDL (samsung)
* Bugfix: Synced ramdisk with upstream CM to fix issue with bluetooth
* Fixes to Fast charge
* Bugfix: fix issues with workqueue (ktoonsez)
* Screen off Max freq will be disabled while in call (ktoonsez)
* Bugfix: Two EHCI: HSIC commits from caf to fix a wakelock
* Added CIFS Support
* Switch to intellidemand as default CPU governor
* Set 504Mhtz as boot freq for GPU
* GPU: Changed 544mhz to 545mhz to conform better with the pll table
* reduce some log spam (ktoonsez)
* GPU OC: Add 627mhtz step
* Linux 3.4.49
June-11
* Merged all upstream changes from CM kernel, including things like the MDM kernel source update
* Updated to Linux 3.4.48
* GPU OC now correctly reflects the current gpu freq to sysfs
June-7
* Pretty sure the intellidemand issues are fixed now
* Some bugfixes from caf for cpufreq and cpufreq stats
* GPU OC is fixed now (wasn't working correctly, would reject any freq higher then 450)
* GPU OC steps are now 504 544 and 601mhtz
* Synced with upstream (CM)
June-4
* Added in between steps to OC freqs to try and help people squeeze a little more out of the CPU (ktoonsez)
* GPU OC to 533Mhtz
* Added some missing intelidemand code to try and fix battery drain
* Some upstream changes like control screen color temp by sysfs
* Switched back to interactive as default governor
May-31
* Tweaked the GPU bandwith and governor low/med/high values for better performance
* Some bug fixes from type-o's made by samsung
* Removed CPU governors that don't support hotplugging (ktoonservativeq, dancedance)
* Min cpu freq with start at 378Mhtz for all cores
* Switched to XZ compression when making kernel to reduce size (the only impact on user end is a 1 sec longer boot time on Samsung splash)
May-29
* Reverted some cherry-picks from upstream that was causing bootloops for some
* Fix for GPU governor, it was sometimes getting stuck at 450 mhtz even with screen off (credits: ktoonsez)
* Updated the updater-script in the flashable zip to do some housekeeping before flash like remove old modules
May-28-build2
* Fixed bad zip packages
May-28
* Rebased source off of ktoonsez kernel,
* Fixed all the instability from the last releases
* CPU OC up to 2322 Mhtz (not all devices can handle this!)
* added frandom support
* Added a few Governors and I/O Schedulers
* Disabled a lot of useless debugging options
* Disabled un-needed modules
* More general build optimizations
* Other changes I forgot
May-26-build2
* Fixed all the bootloop issues from the last build
May-26
* Bugfix: cpu freqs on all cores but core0 weren't being set to desired levels
* Bugfix: a lot of block (I/O) fixes from caf and faux123
* CPU is now overclockable to 2268Mhtz but not all devices, including mine can handle this.
* CPU can now be overvolted to 1500 uV
* CPU L2 cache overclock to 1.3Ghtz (this seemed to give the most performance boost out of any overclocking so far)
* full kernel based mpdecision (there is an init.qcom.post_boot.sh script included that will disable userspace mpdecision, DON'T REMOVE IT)
* Added back all the special UID drivers that got disabled
* A lot of cleanup to the defconfig and disabled a lot of useless options and enabled some that weren't there before
* Switched to intellidemand as default governor
* Switched to ROW as default I/O scheduler
* CPU: Boot at default freq of 1890Mhtz for stability
* Probably a lot more small tweaks I'm forgetting
May-18
* Added an init.d script to zip to help control custom kernel settings
* Added CPU OC to 2106 Mhtz (1998 mhtz default)
* Set default GPU OC to 450mhtz to save battery (still overclockable via 89chronic init script)
* Adjusted the GPU Bus bandwith, seems to help with performance and battery life
* Lots of updates for CM kernel (gpu drivers etc)
* Maybe a couple other tweaks I forgot to list
May-14
* initial release
* Please keep all comments in this Discussion Thread. Any comments not in that thread will be ignored. Feel free to use the DevDB Bug reporting option as you see fit. This is critical in keeping the same question from being asked times in 5 different threads all with the same answer. It was really slowing down development.
* ]If you have problems with frequencies sticking use "No frills CPU Control" and go to Settings and prevent other apps from changing CPU settings
* Although this kernel has now reached "stable" status. bugs still could pop up. please if you find a reproducible bug and decide to post please try and provide a last_kmesg or logcat.
* Versions go as follows: AOSP-JB4.3 = CM-10.2 etc, AOSP-JB4.2 = CM-10.1 etc, TW-JB4.2 = Android 4.2 TW based ROMs, TW-JB4.3: Android 4.3/Google Edition based ROMs
AOSP-JB4.2 : ChronicKernel-JB4.2-AOSP-TMO-v2.3.zip
AOSP-JB4.3 : ChronicKernel-JB4.3-AOSP-TMO-v2.3.3.zip
AOSP-KK4.4 : ChronicKernel-KK4.4-AOSP-JFLTE-v3.1.zip
TW-JB4.2 : ChronicKernel-JB4.2-TW-TMO-v1.3.zip
TW-JB4.3 : ChronicKernel-JB4.3-TW-TMO-v1.3.zip
Goo.im Repo : CLICK HERE
* This Kernel can also be downloaded directly with GooManager *
My Github (main): https://github.com/Team-Hydra/android_kernel_samsung_jf
* First off of course cyanogen, the CyanogenMod project and all who contribute.
* A lot of this was taken/based off of flar2's Kernel for the HTC One, so thanks for the source!
* Also grabbed some things from Faux123's kernel
* All the people who have helped me learn more and more over the past 4 months (arco/dastin1018/android1234567) you guys are the best!
I really didn't want to do this but people keep asking so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the paypal account may say patricia, this is because it's a family paypal account.
Happy Flashing
Albinoman887
XDA:DevDB Information
[AOSP/TW] ChronicKernel, a Kernel for the T-Mobile Samsung Galaxy S 4
Contributors
albinoman887
Kernel Special Features: * Compiled with linaro * GPU OC to 627 Mhtz (450Mhtz default - configurable though chronic-config.sh init script) * CPU OC to 2322 Mhtz (1890 Mhtz default) * CPU L2 cache overclocked to 1.3Ghtz * Raised the low/med/high values for GPU governor one step ea
Version Information
Status: Stable
Created 2013-10-09
Last Updated 2014-05-07

Reserved
Please keep all discussion in the new Q&A thread please. otherwise your comment will most likely be ignored. Check "NOTES" section in OP for details

Nice. GPU OC. Party only getting started. Cant wait fot CPU OC.
Sent from my SGH-M919 using xda app-developers app

yeah i've never overclocked the cpu from scratch before. i have it done but it wont boot. i think i'm missing a couple references in source somewhere

Great to see you on the S4 albino! I really appreciated your work on the Sensation.

Oh, this is sweet. Installing it now.
Is the S4 audio hardware compatible with the Voodoo Sound? (Had this on my S1, and it was needed..)
Looking forward to this. :good:

Getting lower benchmark scores for some reason on this kernel.
Sent from my SGH-M919 using Tapatalk 2

hmmm i get 6800 is quadrant with stock cm kernel and 7600 with mine. what benchmark program. if you want try underclocking the gpu by 50 mhtz you can do this with this command
echo "4500000" > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk
i'm considering lowering the GPU to that as it saves battery and might give better performance i'm not sure

albinoman887 said:
yeah i've never overclocked the cpu from scratch before. i have it done but it wont boot. i think i'm missing a couple references in source somewhere
Click to expand...
Click to collapse
I think gs4 uses acpuclock 8064 for its main CPU controll. Check the pll tables and convert the hex to decimals and multiply by 27 if I'm not mistaken.
Sent from my SGH-T999 using Tapatalk 2

This belongs in original Android development?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Phone: Tmobile Samsung Galaxy s4 m919
Rom: Wicked v2
Kernel: Stock
Radio: Stock
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ArianaGrande said:
This belongs in original Android development?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Phone: Tmobile Samsung Galaxy s4 m919
Rom: Wicked v2
Kernel: Stock
Radio: Stock
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Click to collapse
isint original for the stock fw. i dont really understand the two different types can someone explain that to me?

Stock..
Antutu3d 5200
Quadrant 7200
3dmark 6600-6850
Chronickernal..
Antutu3d 6000
Quadrant 8000
3dmark 6400-6600
Ran multiple tests @ 35f temp stock settings.
Sent from my SGH-M919 using Tapatalk 2

good to know, i got OC working. only issue i'm having is freqs not sticking. once i get that solved i'll release a update

Please make the kernel compatible with international 9505!
Gesendet von meinem GT-I9505 mit Tapatalk 2

this kernel cant brick a phone if i try it on a i9500, only soft brick right?

iamnotkurtcobain said:
Please make the kernel compatible with international 9505!
Gesendet von meinem GT-I9505 mit Tapatalk 2
Click to expand...
Click to collapse
New version today, i'll add the other variants as well
New features:
CPU OC to 2106 Mhtz
Voltages are still stock, will work on that for next release
Tweaked GPU bus bandwith
Lots of upstream changes from CM
Added a few more governors
i'll be posting soon

albinoman887 said:
New version today, i'll add the other variants as well
New features:
CPU OC to 2106 Mhtz
Voltages are still stock, will work on that for next release
Tweaked GPU bus bandwith
Lots of upstream changes from CM
Added a few more governors
i'll be posting soon
Click to expand...
Click to collapse
So it works on cm for 9505?
Is intellidemand/pegasusq and row included?
Waiting for it! Awesome!!
Gesendet von meinem GT-I9505 mit Tapatalk 2

build posted, OP updated

albinoman887 said:
build posted, OP updated
Click to expand...
Click to collapse
Thanks! Will wait for the 9505 version
Btw which governors are available?
Gesendet von meinem GT-I9505 mit Tapatalk 2

iamnotkurtcobain said:
Thanks! Will wait for the 9505 version
Btw which governors are available?
Gesendet von meinem GT-I9505 mit Tapatalk 2
Click to expand...
Click to collapse
Read the original post its all listed there
Sent from my SGH-M919 using Tapatalk 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hybrid Kernel is for all AOSP ROMs powered by Android 5.0 aka Lollipop.
The main objective of this kernel is to maximize end-user experience with advance optimizations from CAF and 3.18 mainline kernel along with device specific features - A TRUE HYBRID.
Linux mainstream (3.4.y or torvald's dev git) offers FIXES and UPDATES for all architectures (like x86 as well as ARM)
We DO need these crucial updates to ensure stability and security. There are many CM kernels which are already updated with 3.4.y branch.
Hybrid kernel will keep up with latest wherever required. Don't fall for garbage talks.
Hybrid Kernel is descendant of CHAOS kernel - Kernel for CM11 with bleeding edge CAF updates, features and fixes.
You can play with all the features using SYNAPSE app.
We have developed support for Synapse in-kernel itself, no need to flash UKM or install any other kernel manager apps.
Feature Highlight:
Latest from Google (kernel_msm source + kernel_common updates)
Complete CAF Sound Experience (audio offloading and auto UHQ - ultra high quality)
Synapse Backend Support. Install Synapse app from Play Store.
Sound Controls and Profiles (including Faux sound app support - though you won't need it)
Gamma Controls and Profiles (including Franco Display control app support - though you won't need it)
Advcanced CPU Boost driver with unified hotplug boot, wake boost and input boost controls (Truly engineered for Project Butter)
In-kernel thermal driver (always enabled) and thermal controls.
CAF updates for WiFi driver.
Backported fastest ZRam from 3.18 kernel. (Fastest ZRam with customizable compression techniques)
Enhanced KSM (Enabled by default)
Enhanced LMK (low memory killer) with profiles and controls (Thanks Moto source and @Dorimanx)
Tuned virtual memory and LMK (Tuning based on our R'n'D, you can change as per your wish using Synapse)
Overclock upto 2.5 GHz (Still boots at stock frequency)
Per CPU Total Control (You can control how each core will behave individually - set min/max/boost freq and governor)
GPU Overclock and lower freq steps. (Still boots at stock max frequency)
GPU driver critical fixes and updates for smoothness.
Additional Interactive governor for GPU (thanks to Franco)
MSM Limiter driver (Does much regulation on CPUFreq driver than you can imagine. Check it out in Synapse app for details.)
Voltage controls (UV upto 675 mV. Please note our hardware have diff PVS category and so voltages and stability over diff voltages will differ user to user. Find your poison yourself with voltage controls in Synapse)
3.4 upstream important updates and fixes (100% stable updates for our 3.4.y kernel)
Power-efficient workqueues (Ported from 3.18 mainstream - PE WQ aims at improving power efficiency.)
Enhanced MSM Hotplug Driver + Controls (Base driver by myfluxi - Enhanced further by me, Dorimanx and alucard)
Enhanced Intelliplug Hotplug Driver + Controls (Base driver by faux- Enhanced further by me, Dorimanx and alucard)
CyanogenMod Hotplug Driver (This driver is disabled by default)
Enhanced Bricked Hotplug Driver + Controls (On mass demand. Base driver by showp1984- Enhanced further by me)
Auto busybox installation (Busybox is required by root apps to perform misc tasks. Please note this wouldn't auto-root device.)
Multiple TCP Congestion methods (HTCP is default - can be changed via Synapse)
Additional FIOPS, VR, ZEN and BFQ Schedulers (ROW scheduler is our default)
Additional Classic Interactive, Intellimm and ZZMoove governors (Bacon governor is our default)
DT2W/S2S/S2W/Wake Timeout/Power Key Suspend (All the wake controls you'll ever need.)
Hardware Encryption (Faster and Powerful) (Removed to fix idle battery drain)
Built with SaberMOD 4.9.3 Toolchain (Performance + Power) The toolchain is rebuilt by me from their sources and has optimized few parameters.
CDROM emulation support (DriveDroid support included)
LCD KCal driver from LG G2 (This provides ability to change RGB values using Synapse)
Tuned LCD Backlight driver to save power
OTG Support for all ROMs (Use StickMount app if your ROM doesn't provide framework support to auto-mount like CM12)
MultiROM Supported (Thanks tasssadar)
init.d support to autorun user defined scripts. (Do not mess with it unless you know the conflicting risks)
Optimized RWSEM, AES and SHA1 routines with NEON mode enabled.
You name it, we will have it.*
*You can request any feature you like to see, we will respond for feasibility.
To know all the fixes and changes done, please refer detailed change log in below post.
Installation Checklist:
Your ROM is rooted. (If any root issue, please flash SuperSu)
Do not flash UKM after flashing this kernel.
Do not install any external busybox.
Install Synapse app from Play Store.
Download Here: (3.0 and above)
Click Here
Download Here: (2.1 and below)
Click Here
No mirrors. If you have trouble downloading, you can request in topic and since we have good user community, you will get mirror from our awesome user community.
The Awesome User Community Pinned Posts!
Typical Battery Stats using Hybrid Kernel
Companion review from one of the awesome devs.
Source:
Click Here
ROM Chefs, feel free to incorporate kernel in your ROMs or use above source for ROM build. Just do provide topic link for resolution of kernel issues/queries, if any.
Very special thanks to some real good devs, I came across while N5 kernels development -
@Dorimanx , @Alucard24 , @ak , @defconoi , @renderbroken , @LaboDJ , @xboxfanj @apb_axel
(I think I am missing some. Apologies.)
Kernel dedicated to your's and awesome user community's support!!
Also, thanks to these devs for contribution and inspiration -
@andreilux (Synapse interface app . This guy is best)
@apb_axel (Synapse backend support. Please thank him HERE.)
@myfluxi (device specific tweaks and fixes)
@franciscofranco (voltage controls and tuned parameters)
@showp1984 (wake controls)
@faux123 (faux sound baseline)
@flar2 (OC table and extended wake controls)
Let the Chaos Begin!
XDA:DevDB Information
Hybrid Kernel, Kernel for the Google Nexus 5
Contributors
neobuddy89
Source Code: https://github.com/neobuddy89/hammerhead/commits/lollipop/
Kernel Special Features: Per CPU Total Control, CAF Sound, Overclock, Gamma Control, Sound Control, Volt control, CPU Boost
Version Information
Status: Nightly
Current Stable Version: 2.1
Stable Release Date: 2015-02-23
Created 2014-10-26
Last Updated 2015-04-05

Change Log
Code:
[B]Hybrid_v3.0-[04-05]-[14-48][/B]
* New build from refreshed lollipop-mr1 base.
---------------------------------------------------------------------------------------------------
[B]Hybrid_v2.0[/B] (23/Feb/2015)
* Stable Release
* Updated KCal driver to latest
* Fixed potential errors in Synapse
* Updated F2FS
* Misc updates
[B]Hybrid_v2.0-[02-18]-[08-59][/B]
* Added KCAL - Advanced Color Control support. Get app [URL="http://forum.xda-developers.com/android/software-hacking/dev-kcal-advanced-color-control-t3032080"]HERE[/URL]. Thanks @[URL="http://forum.xda-developers.com/member.php?u=4316709"]savoca[/URL].
* Impulse governor is new default governor with powersave_bias = 1.
[B]Hybrid_v2.0-[02-15]-[16-32][/B]
* Uninstalled Camera Driver updates
[B]Hybrid_v2.0-[02-15]-[02-02][/B]
* Update for camera driver to avoid possible mem corruption.
* Updated OTG mount for CM based ROMs.
[B]Hybrid_v2.0-[02-14]-[11-03][/B]
* Unified EXT4 and F2FS version.
*** MultiROM users please update multirom binary and recovery using MultiROM manager app.
*** F2FS users please report working of this version as primary ROM or secondary ROM or both.
* Disabled some qualcomm crypto routines
*** Encrypted users please test if encryption still works fine (it should work as before, we have ARM optimized crypto drivers still active)
*** This is a lean approach to reduce battery consumption. Please report if any difference in battery consumption.
* Updated Synapse backend support for profiles.
*** Please report if any issue.
[B]Hybrid_v2.0-[02-12]-[01-06] / Hybrid_v2.0-[02-12]-[01-23]_F2FS[/B]
* Updated Bricked hotplug
* Updated installation script to remove busybox conflicts
* Updated audio codec driver
* Removed GPU OC (doesn't work with Lollipop)
[B]Hybrid_v2.0-[02-06]-[18-18] / Hybrid_v2.0-[02-06]-[18-38]_F2FS[/B]
* Linux 3.4.106 update (lots of bug fixes for file system, updates for generic drivers, memory improvements, NET driver upgrades and fixes)
* CPUFreq & CPU Boost Driver updates and bug fixes
* A new shiny and our in-house CPU governor - [I]Impulse[/I]
** Impulse governor is based on CAF Interactive but with additions to work smoothly with CPU Boost driver and improved freq stabilization.
Testing in progress.
[B]Hybrid_v2.0-[02-01]-[23-40] / Hybrid_v2.0-[02-02]-[00-21]_F2FS[/B]
* Fixed Synapse Backend Support for CM12 built-in superuser. (Needs more testing)
* Updated interactive governor.
* Misc updates
* Adapted Interactive and CPU Boost defaults from Chaos Kernel (theoretically, these should lower power consumption)
[B]Hybrid_v2.0-[01-28]-[09-26] / Hybrid_v2.0-[01-28]-[09-40]_F2FS[/B]
* Updated F2FS to latest. Please test with F2FS build.
* Updated zzmoove governor.
* Added Yankactive governor, some tuning may need to follow later. This is much similar to classic interactive.
* Fixed hispeed freq for interactive governor for smoother transitions.
* WiFi driver update.
* CPUIdle minor update.
* Audio driver updates.
* Updated kernel locking mechanism from 3.14 mainline.
* Improved stability.
[B]Hybrid_v2.0-[01-22]-[01-48] / Hybrid_v2.0-[01-22]-[09-12]_F2FS[/B]
* Added new SmartMax governor, tuned for hammerhead.
* Updated ramdisk from CM12. (Still root issue only with Synapse app, will check later)
* Bacon governor is now default interactive governor. Classic interactive is removed.
* Updates for conservative and intelliminmax governor!
* RBTree algorithm optimizations from 3.18 upstream.
* Merged Camera driver updates (as that in previous preview build)
* Motorola optimizations for better performance and improved suspend routines.
* OOM improvements.
* Updated serial driver and ARM updates.
[B]Hybrid_v2.0-[01-17]-[00-30][/B]
* Lots of bug fixes from Cyanogen team and stable upstream.
* Updated sound codec driver from CAF.
* Optimized crypto mode for ARM with NEON acceleration.
* Mainstream backports for IRQ subsystem.
* RCU updates from CAF.
* ARM updates.
[B]Hybrid_v1.0[/B] - (03/Jan/2015)
* Stable Release
* CPU Global voltage steps change from 25mV to 5mV
* Update bacon governor
* Misc updates
[B]Hybrid_v1.0-[12-28]-[22-58][/B]
* Fix Fast Charge compatibility with other kernel apps.
* Misc fixes from 3.4.y
* Sound codec driver update
[B]Hybrid_v1.0-[12-25]-[23-00][/B]
* Added QCOM Audio Effects (from CAF)
* Ramdisk updates + Improved tuning
* Updated BFQ I/O scheduler to v7r7
* Enabled qcrypto hw interface (This is not hw encryption)
[B]Hybrid_v1.0-[12-22]-[09-08][/B]
* Simplified Fast Charge control in Synapse
* Updated sound codec driver
* Disable qcrypto hw interface (likely to break l2tp protocol)
[B]Hybrid_v1.0-[12-14]-[01-47][/B]
* Improved Suspend Routines. (Better sleep)
* Reverted back to old settings for CPU Boost and Hotplug drivers.
* Fix misc issues.
[B]Hybrid_v1.0-[12-09]-[22-00][/B]
* New settings:
** Hotplug Boost disabled by default.
** Touch Boosted CPUs disabled by default.
** KSM disabled by default.
* Improved headphone detection consistency
* Misc fixes/improvements from 3.4.y.
* KControl app should now show MSM_MPDECISION tunables (Please check)
* Improved CPU Boost control in Synapse. You can disable it per CPU.
[B]Hybrid_v1.0-[12-07]-[14-36][/B]
* Add control under Misc Tab in Synapse to disable Charging LED.
[B]Hybrid_v1.0-[12-07]-[11-28][/B]
* Fix media driver leaks.
* Tune intellimm governor. So far so smooth!!
* Misc updates for MSM specific drivers.
* Set interactive as default GPU governor.
[B]Hybrid_v1.0-[12-05]-[01-20][/B]
* Completed all required sync with 3.4.105 kernel.
[B]Hybrid_v1.0-[12-03]-[00-04][/B]
* Disabled HW Disk encryption (Fixes idle battery drain)
* Lots of fixes from Linux 3.4.105 update
[B]Hybrid_v1.0-[12-02]-[01-09][/B]
* Fix CM12 native root. (No more issue from kernel side, not sure if any issue still persist in userspace for CM12)
* Misc fixes and updates for stability.
[B]Hybrid_v1.0-[12-01]-[09-11][/B]
* Fix soft reboot with voltage below 700mV
* ARM updates
[B]Hybrid_v1.0-[11-30]-[15-11][/B]
* MSM Idle and power mode driver updates from CAF.
* Misc updates for MSM board.
* Zzmoove governor for test drive.
* Modem driver updates.
* Increased max limit for sound controls in Synapse app.
[B]Hybrid_v1.0-[11-29]-[09-50][/B]
* Add intellimm governor by Faux - This may need further tuning. (I still love bacon gov!)
* Tune bacon governor for battery saving!
* Tune hotplug drivers for battery saving. Set max cpus online (suspend) to 1 by default!
* Added and tuned bricked hotplug driver. Experimental and need reviews.
* Misc updates for internal memory.
* Thermal driver update.
* Ramdisk updates.
* Update hotplug monitor in Synapse, looks better now.
[B]Hybrid_v1.0-[11-24]-[02-30][/B]
* Rework MSM Limiter driver and bug fixes.
* Add live monitor for min-max-current frequencies in Synapse.
* USB Driver update from 3.4.y and CAF.
[COLOR=Red]SuperSu version 2.27 or later required.[/COLOR]
[B]Hybrid_v1.0-[11-22]-[21-43][/B]
* HW Encryption support
* SELinux changed to "Enforcing" mode
* Fixed broken QSEEComm driver
* Misc updates
[B]Hybrid_v1.0-[11-21]-[02-32][/B]
* Fix broken root with SuperSu after CM ramdisk updates.
[B]Hybrid_v1.0-[11-20]-[21-52][/B]
* Fixed Sensor regression - Removed optimized bionic libs.
[ If you already flashed prev nightly broke proximity sensor, dirty flash your ROM and then this nightly.]
[B]Hybrid_v1.0-[11-20]-[08-47][/B]
* Added CyanogenMod hotplug mechanism (This is improved mpdecision. It also manipulates max freq)
* Added Qualcomm Power HAL
* Add vivid color preset tunable (under gamma tab)
* Added optimized bionic libraries
* Added always-on charging LED
* Ramdisk updates from CM12
* Add Piereligio_True_RGB_V7 Color Profile
[B]Hybrid_v1.0-[11-17]-[02-23][/B]
* New Feature: Add Per-CPU Input Boost Frequency Control.
* New Feature: Add Per-CPU Governor Control.
* Improved GUI for CPU tab in Synapse
* Add control for tuning vibrator strength when using wake controls
* Tuned CPU Boost driver to use 500 ms input boost. This gives real good smoothness!!
You can change this to value as you like via Synapse.
[AOSP Power HAL gave 3 sec boost which is too much, non-configurable and hard on battery.
We had removed it long back.]
* CAF update and fixes for MSM BUS driver.
* ZRAM minor fix for potential crash. (from 3.18 upstream)
* Fix memory leak in video playback driver.
* Serial driver updates from upsteam. (not CAF)
[B]Hybrid_v1.0-[11-12]-[09-24][/B]
* New feature: MSM Limiter Driver can control min/max freq of ALL cores individually. Under testing. Please share your exp if tested.
* Complete file system sync with 3.4.y kernel. This includes lot of fixes by upstream.
* EXT4 misc fixes cherry-picked from Chaos kernel.
[B]Hybrid_v1.0-[11-09]-[22-47][/B]
* Added wake controls! (S2W/S2S/DT2W/PWR Key Suspend/Wake Timeout) -- Experimental - Let me know does these work good.
* CM12 compatibility. (until CM12 decides to take another turn again)
[B]Hybrid_v1.0-[11-09]-[13-57][/B]
* Awesome audio updates (Thanks to Steve's staging source and chaos source)
* Critical fixes and updates from 3.4.y
* Enabled support for USB serial drivers (3G cards)
* ARM updates and fixes
* Tuning for battery saving and more smoothness
* Lowered default temperature threshold by 5 degree.
* Added SIO, FIOPS, ZEN and VR I/O schedulers.
* Tuned ROW I/O scheduler
[B]Hybrid_v1.0-[11-07]-[01-08][/B]
* Fix Synapse broken controls for some AOSP compiled ROMs (You still need to install Superuser app separately, if you haven't already)
* Complete crypto, qseecom and security update from CAF. (Same as Chaos)
* Updated Bacon governor for performance.
* Minor update for CPU Boost driver.
* Misc missed updates which should be included in previous build.
[B]Hybrid_v1.0-[11-04]-[23-30][/B]
* Misc updates for timers and IRQ.
* CPUIdle complete backport from 3.16.
[B]Hybrid_v1.0-[11-03]-[01-16][/B]
* Minor correction in GPU freq steps. (perfect now)
* Complete MMC update from CAF. (same as Chaos)
* Complete kernel memory management update from CAF and 3.4.y. (virtual, swap, slab, slub, compaction etc)
* More updates for sound driver from CAF.
* Readded tuned LMK and OOM.
* DIAG complete update from CAF.
* Readded nvidia tegra patches for improved power efficiency.
* Fix broken Synapse control for hotplug
[B]Hybrid_v1.0-[10-30]-[03-55][/B]
* Readded CAF sound codec driver (which was removed for a test build)
* Default governor changed to Bacon which is OnePlus one interactive governor.
This governor offers lower timer_rate which helps a lot preventing any gliches in audio.
If we had kept mpdecision binary in place, min freq would have stayed higher most of the times and helped audio glitch BUT that's too much to sacrifice.
Let's give a shot to Bacon magic.
* Clean ups of misc updates.
* Add interactive governor for GPU. Pretty good.
[B]Hybrid_v1.0-[10-28]-[23-11][/B]
* Auto disable mpdecision to stop messing with minfreq.
* Clean sound control driver to improve compatibility with PowerAmp app.
* GPU OC and improvements. (Still it will boot at stock freqs)
* GPU controls for Synapse
* Various fixes from 3.4.y branch
* Misc updates from Chaos
* Add F2FS support (no auto mount due to some limitations in 5.0)
[B]
Hybrid_v1.0-[10-26]-[13-05][/B]
* Initial version with core features and Synapse support!

Reserved
__/\__ Updated 24th Nov, 2014.
F.A.Q.
Q. What ROMs this kernel work?
A. It should work on ALL lollipop ROMs so far. If it doesn't please highlight.
Q. Is this CAF or AOSP kernel?
A. This is AOSP kernel with best updates from CAF and 3.4.y
Q. Root is no longer working. What do I do?
A. Install SuperSu 2.27 or higher. We need Superuser app that is compatible with Enforced SELinux.
Q. How do I change kernel specific settings?
A. We have developed SYNAPSE backend support. Install Synapse from Play Store. Do not install UKM.
Q. XYZ is not working as expected. What to do?
A. Describe what ROM you running, whether this issue exist on stock kernel of your ROM, share dmesg log when issue just occured,
share steps to reproduce the issue.
Q. Can you add ABC feature?
A. We already have most features. If you need new any ABC feature, provide link to it's development if available.
Also let us know how will it be helpful. If same is not feasible for me to add or there is no need to add same, I will reply back.
Q. ???
Click to expand...
Click to collapse

Good to see you back neo
Sounds interesting, will give it a try. Thanks and a great Sunday.

About to flash this right now. Thanks neo. Looking forward to OTG support! Thanks for sharing.

Does this kernel works on @sykopompos rom?

llevo3 said:
Does this kernel works on @sykopompos rom?
Click to expand...
Click to collapse
Link please. It works on last L-preview found in Vomer topic.

neobuddy89 said:
Link please. It works on last L-preview found in Vomer topic.
Click to expand...
Click to collapse
http://forum.xda-developers.com/google-nexus-5/development/l-android-lpv-dev-n5-enhanced-t2856934

llevo3 said:
Does this kernel works on @sykopompos rom?
Click to expand...
Click to collapse
I'll let you know in 5 minutes. About to flash it over B15.
Edit: Sorry for the wait. 1st boot took nearly 20 minutes!
Anyways, works fine over B15. Root works and all.

Indeed good to see you back Neo
Anyways, kernel is running stable for me, any chance to get fiops or sio schedulers in the future?

Good to see this from you neo! Have you set selinux to permissive or enforcing?
Sent from my Android 5.0 Lollipop + ElementalX powered Nexus 5

Can confirm this works on b15! Run amazing so far, good work

Flashed over vomers preview zip and there's something really screwy with hotplugging. All cores are shown as flashing on and off constantly in synapse and frequencies will not go below 1297mhz
Sent from my Android 5.0 Lollipop + ElementalX powered Nexus 5

sjknight413 said:
Flashed over vomers preview zip and there's something really screwy with hotplugging. All cores are shown as flashing on and off constantly in synapse and frequencies will not go below 1297mhz
Sent from my Android 5.0 Lollipop + ElementalX powered Nexus 5
Click to expand...
Click to collapse
What's the min freq? Is it setting itself to 1297 MHz?
I had same prob, so I thought it's something to do with userspace stuff... I flashed eng.stk's kernel and back hybrid one after a boot.
And all settled quite good..
Need to flash entire ROM again to check what may be causing this.
I believe something left from previous kernel?? Were you on other kernel before?

R3Lax1 said:
Indeed good to see you back Neo
Anyways, kernel is running stable for me, any chance to get fiops or sio schedulers in the future?
Click to expand...
Click to collapse
Yes, that can be done.
sjknight413 said:
Good to see this from you neo! Have you set selinux to permissive or enforcing?
Sent from my Android 5.0 Lollipop + ElementalX powered Nexus 5
Click to expand...
Click to collapse
I have just ripped ramdisk from preview ROM which had modified ramdisk to begin with.
Haven't touched anything on selinux in the ramdisk. So, I believe the modified kernel in vomer thread had changed it to permissive.
Anyways, you can change this yourself using Synapse; there is option available to do so under TOOLS tab.

neobuddy89 said:
What's the min freq? Is it setting itself to 1297 MHz?
I had same prob, so I thought it's something to do with userspace stuff... I flashed eng.stk's kernel and back hybrid one after a boot.
And all settled quite good..
Need to flash entire ROM again to check what may be causing this.
I believe something left from previous kernel?? Were you on other kernel before?
Click to expand...
Click to collapse
The min frequency was jumping between 1190, 1297 and 1497 I believe! I was just on sykompopos permissive boot.img before
Sent from my Android 5.0 Lollipop + ElementalX powered Nexus 5

Kernel working well with version 14 of sykopompos 5.0 preview.
Feels quite snappy.
Min frequency is giving me no problems.
Thanks for this gem

sjknight413 said:
The min frequency was jumping between 1190, 1297 and 1497 I believe! I was just on sykompopos permissive boot.img before
Sent from my Android 5.0 Lollipop + ElementalX powered Nexus 5
Click to expand...
Click to collapse
Will check. Thanks.

Welcome back, Neo! I knew that we can't loose you
From my N10

Running syko B15 and installed your hybrid kernel. One problem I can't change gamma profile. It won't apply on synapse.

DISCONTINUED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, here I'm introducing a custom kernel for our Moto X Play, based on Squid Kernel . Full credits goes to him:fingers-crossed:. I only added some tweaks and more is coming soon. No more blah blah...
Features:
Reduced VFS cache pressure
Disabled noatime and nodiratime
Dirty ratio tweaks
Enabled Arch power and Disabled GFS
Asynchronous I/O latency to a solid-state disk greatly increased
Optimized SLUB
VM_MAX_READAHEAD set to 1024 kbytes
Optimize apply_slack for size and speed - thanks to varunchitre15
Forward port Dynamic Fsync to Linux 3.10 by varunchitre15
Disabled MMC CRC check
Enabled some extra TCP Congestion Controls
Use all cores on-boot for faster bootup
HMP-aware task placement
Code:
[B]CPU Hotplugs:[/B]
[SIZE=2][STRIKE]Bricked Hotplug[/STRIKE]
MSM Hotplug
[STRIKE]MAKO Hotplug
ZEN_DECISION Hotplug
AUTOSMP Hotplug
MSM SLEEPER[/STRIKE][/SIZE]
Code:
[B]CPU Governors:[/B]
[SIZE=2]LIONFISH
SMARTMAX
BLUACTIVE
SMARTASS2
INTELLIACTIVE
INTERACTIVE_PRO
ZZMOOVE
ALUCARD
BARRY_ALLEN
BIOSHOCK[/SIZE]
How to install:
Download Phoenix kernel flashable zip
Copy it into SD Card
Reboot into custom recovery
Install zip from SD Card
Credits:
squid2 (for the GPL source)
varun.chitre15 (for the GPL source)
Kunal.Kene.1797 (for the GPL source)
HridayHS (for the GPL source)
Shoaib05 (for the GPL source)
Motorola
XDA
Google
Missed you ? sorry pm me I'll add you
Downloads:
See the attachment or Download
*** v1.5 and above are not compatible with Stock 5.1 roms ***​
Click to expand...
Click to collapse
XDA:DevDB Information
Phoenix Kernel, Kernel for the Moto X Play
Contributors
AnoopKumar, squid
Source Code: https://github.com/HelllGuest/phoenix_kernel_lux
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-10-24
Created 2015-10-24
Last Updated 2016-02-18

Change log
v1.0 2015 October 24
Initial release
v1.1 2015 November 03
Up to date with Squid Kernel
Added frandom
Network speedup tweak
kernel/sched/fair: reduce latency
power: process: drecrease time to enter sleep
defconfig Enable NTFS,CIFS
Added intelliactive - Paul Reioux
Added smartass2 - Erasmux
Added bluactive - Mike Chan,engstk
Added interactive_pro - Mike Chan
Added smartmax-maxwen
v1.2 2015 November 14
Up to date with Squid Kernel
Added Bricked Hotplug - showp1984
Added MSM Hotplug - myfluxi
Disabled IOSCHED_TEST
v1.3 2015 November 26
Updated Lionfish
Wake mod s2s added
Disabled Bricked Hotplug and added MSM Hotplug as default
v1.4 2015 December 26
Up to date with Squid Kernel
Reduced swappiness to 30
Reduced lag
Some minor fixes too
v1.5 2016 February 08
Up to date with Squid Kernel
Linux 3.10.96
Reduced lag
Improved smoothness
Updated Powersuspend
Adreno idler by arter97
320K AAC Encoding
SELinux: permissive
Compiled with Phoenix GCC 5.2
v1.6 2016 February 18
Up to date with Squid Kernel
Overclocked CPU + GPU
Added zzmoove - Zane Zaminsky
alucard - [email protected]
barry_allen - Javier Sayago
bioshock - James Jamison
Added support for CRC Toggle
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Optimized Task-Search for upto 6% increase in Performance
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Enabled High-Priority WorkQueue for DevFreq
Fixed High-Load Average due to Drivers
Fixed Reporting of GPU Frequency
MSM_HOTPLUG: min 2 cpu while screen off
msm8939: overclock lux big cluster to 1709 MHz
msm8939: overclock lux little cluster to 1209 MHz
msm8939: overclock GPU to 700MHz

Aren't hotplugs like MSM hotplug, bricked hotplug etc. meant for qcom quad core/krait CPUs? I'm not sure how they'd behave on big.LITTLE. Even the governors, I'm not sure they are adapted to big.LITTLE.... could you shed some light on it? Also, your commit history looks like a kang job.... you should clear that out.

Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.

It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...

AnoopKumar said:
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
Click to expand...
Click to collapse
Tbh cherry-picking commits doesn't need a fast internet connection. (I myself have picked commits on a 512 kbps internet) and credits need to be given in the commit, otherwise it counts as a "kang".
Also, credits for bricked hotplug and alucard hotplug etc. haven't been given even in the thread.

Pardon me.. I will fix it give me some time

AnoopKumar said:
Pardon me.. I will fix it give me some time
Click to expand...
Click to collapse
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.

Nice work AnoopKumar. Added to index

eskamhl said:
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
Click to expand...
Click to collapse
Thank you for the feedback.. Some issues are removed and added new zip

Quasar said:
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Click to expand...
Click to collapse
Bro removed all kanged commits.

Perfect, working 100%!!
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.

No more additional cpu governor on the last version?

Nico3d3 said:
No more additional cpu governor on the last version?
Click to expand...
Click to collapse
Actually I removed them because of some authorization issues...

Abravanelsenor said:
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
Click to expand...
Click to collapse
Stay tuned its coming in the next version.

AnoopKumar said:
Stay tuned its coming in the next version.
Click to expand...
Click to collapse
Possible to incorporate D2W?
Thanks :good:

possible installation in the RR 5.5.8 ? No Bootloop ?

FilipeRgz said:
possible installation in the RR 5.5.8 ? No Bootloop ?
Click to expand...
Click to collapse
Currently i'm on pac rom, not faced any bootloop.

brom25 said:
Possible to incorporate D2W?
Thanks :good:
Click to expand...
Click to collapse
Im working on that too. Only sweep2sleep working now

AnoopKumar said:
Currently i'm on pac rom, not faced any bootloop.
Click to expand...
Click to collapse
I'll back up and install for testing, thanks

[size=+1]Welcome to Skatter Kernel forum.[/size]
Today I am very proud to release the Skatter Kernel to you guys, I've done hundreds of tests to see what features function well, and which one's don't. The idea behind this kernel is to be able to customize it the way you want, with the best battery possible
Now... let's take a look and see what's inside this bad boy.
Click to expand...
Click to collapse
Skatter Kernel-v2 is a complete rewrite of v1. What makes this version of the kernel so special?
It's faster, even more stable, and has the ability to run any governor from a 3.10.y kernel.
I've ran many tests and can say, these governors have been playing very nicely with our d2 device. I have not added any junk commits, or any that would cause any battery drain. Also I'm sorry for anyone on marshmallow... but kernel from now on is only going to be nougat and up.
Also I would like to make an introduction to my "Skateractive" governor! :victory:
What does the Skateractive governor do anyways?
Code:
This governor is based on the linux 3.10.y Interactive governor.
I've written it to be mostly a "screen-off profiling" governor.
Meaning, I've added tunables that allow you to customize the governor while the screen is off.
These are...
Timer_rate_multiplier: Name speaks for itself, how many times to multiply timer_rate on screen off. Max number is 10.
Screen_off_maxfreq: Set the limit the max frequency can be reached on screen off.
Screen_off_maxfreq_single_core: If you're like me and use hotplugs you'll notice it can get a bit laggy with music playback when one core is online & max freq is 702mhz. So add a frequency limit for when only one core is online and the screen is off. :good:
* Not a tunable: But enabled powersave bias on screen off & on screen-on back to normal.
Also stripped governor of any unneeded code. For best performance.
Features
* Compiled with a highly optimized Uber 7.x TC
* Tons of optimizations (-Ofast, Graphite, Cortex-A15) and lots more :good:
* CPU UC/OC from 162MHz to 1836Mhz
* Set to Permissive
* Net Speed Tweak
* Decreased time to enter deep sleep
* Optimized GPU
* Enabled Low Power Memory Mode
* Quick Wakeup Driver
* Some Aggressive Seeder Tweaks
* Optimized Square Root Algorithm
* More memory from loggers (Cause the more RAM, the better)
* Screen Tweaks for filling blank spots with more color
* Voltage Table, for your UV/OV Needs
* Tweak to disable Powersuspend when State Notifier is enabled.
* Set standby frequency to 54Mhz.
* Tweaked to lower Thermal throttle on screen off.
* UKSM for better ram, set to not consume so much battery.
* Frandom.
Decimalman's features
* Overclocked GPU to 600, modded & upped to 750Mhz.
* And his super badass tierservative & freelunch governors :good:
* Fast charge patch, no need to diconnect :good:
* Tiered GPU Governor, very nice with frequencies.
Faux123's Features
* Fauxsound
* Powersuspend v1.7
* Dynamic Fsync
* Simple GPU Governor
I/O Schedulers
* Sio
* Sioplus
* V(r)
* Noop
* Zen
* Fifo
* TripNDroid
* Fiops
* Maple
Hotplugs
* MPDecision
* Bricked Hotplug
* Blu_Plug
* Thunderplug v5.4
* AutoSMP
* Intelliplug
* Alucard
* State Helper
* MSM Hotplug
* Skater Hotplug
x MSM Sleeper
x Zen Decision
CPU Governors
* Alucard
* Blu_Active (Latest version)
* Chill
* Conservative (3.10.y version)
* Cultivation
* Cyan (For those gamers, do not use with hotplugs.)
* Darkness
* Despair
* ElementalX v2
* Freelunch
* Interactive
* Lionfish
* Lionheart
* NIghtmare
* Ondemand (3.10.y version)
* Performance
* Powersave
* Relaxed
* Skateractive (Default)
* Skatter_Core
* Smartmax
* Smartmax_EPS
* Tierservative.
Instructions
1.) Make... a... [size=+1]BACKUP[/size]
2.) Download kernel & copy it to sdcard
3.) Flash
4.) Wipe dalvik-cache & cache
5.) Most importantly, Enjoy :good:
Downloads
Right Here
Modded Kernel Adiutor
Right Here
* If anyone needs a mirror link, just ask and I will upload
Contributors
* A special thanks to @bthorne79 for helping me get started on this
* Another special thanks to the beast himself @decimalman
for helping me with a ton of noob questions & especially for the patchs:good:
@faux123 for all his awesome features
@neobuddy for helping me out with the blu_plug driver
@invisiblek for keeping this awesome device alive
@canodroid15 for running my test builds :highfive:
Everyone at CM & everyone else who I forgot
Disclaimer:​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
​
XDA:DevDB Information
Skatter Kernel, Kernel for the T-Mobile Samsung Galaxy S III
Contributors
Lonelyskatter12, bthorne79, decimalman
Source Code: https://github.com/Lonelyoneskatter/skatter_d2_kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-01-29
Created 2016-09-30
Last Updated 2017-11-03

Kernel sounds interesting, but the link is dead for me. Can you repost it?

Link is broke. Please post working link. Looking forward to trying this kernel out

Daemondancer said:
Kernel sounds interesting, but the link is dead for me. Can you repost it?
Click to expand...
Click to collapse
hatchet13rydin69 said:
Link is broke. Please post working link. Looking forward to trying this kernel out
Click to expand...
Click to collapse
Links up, let me know what you guys think :good:

Downloading now will report back with results
Edit.....
So far it very fast and responsive. Battery life is excellent especially considering the fact that I need a new battery as the one I'm using is very old and doesn't like to hold a charge. Will upload screenshots of battery stats after work.
Keep up the awesome work!!!!!!!! :good:

hatchet13rydin69 said:
Downloading now will report back with results
Edit.....
So far it very fast and responsive. Battery life is excellent especially considering the fact that I need a new battery as the one I'm using is very old and doesn't like to hold a charge. Will upload screenshots of battery stats after work.
Keep up the awesome work!!!!!!!! :good:
Click to expand...
Click to collapse
The purpose of this kernel my friend battery & performance I'd love to see some stats & thank you I will :victory:

Lonelyskatter12 said:
The purpose of this kernel my friend battery & performance I'd love to see some stats & thank you I will :victory:
Click to expand...
Click to collapse
Sorry for not getting back to you with stats and screenshots. Had some family issues that couldn't be left unattended. I'm sorry to say that my s3 was unfortunately stolen from me before I had uploaded my results to my drive account. I will say that this kernel made my device perform like new. Which was amazing as the battery was on its last leg. I wonder if this kernel could be built for the Samsung Galaxy Core Prime SM-G360T1? If you need anything to do so let me know. Still kinda a noob but with a lil guidance I can get any source codes you may need for this device. Let me say this was a truly magnificent piece of work for the s3. Thanks in advance

Was running the kernel on OctOs-M and it was quite good. I started using SlimRom though and it seems that your kernel doesn't play nice with it. Everything seems ok but my SIM isn't detected. Using the SlimRom kernel the problem doesn't happen. Would love to use this kernel again!

Compatibility question.
I like the way this sounds, but I've only ever flashed ROM's. Never a Kernel. I was wondering if this kernel would work with what I'm running right now?
### My current build info
ro.build.PDA=T999UVUEMJC
ro.build.characteristics= tmo
ro.build.display.id= JSS15J.T999UVUEMJC
ro.build.fingerprint= samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys
ro.build.hidden_ver= T999UVUEMJC
ro.build.product= d2tmo
ro.build.version.codename= REL
ro.build.version.incremental= T999UVUEMJC
ro.build.version.release= 4.3
ro.build.version.sdk= 18
ro.board.platform= msm8960
###KERNEL INFO
Linux
3.0.31-1804024
#1 SMP PREEMPT Sat Oct 5 00:13:48 KST 2013
armv7
GNU/Linux
Please let me know, thank you.

HollyWood88 said:
I like the way this sounds, but I've only ever flashed ROM's. Never a Kernel. I was wondering if this kernel would work with what I'm running right now?
### My current build info
ro.build.PDA=T999UVUEMJC
ro.build.characteristics= tmo
ro.build.display.id= JSS15J.T999UVUEMJC
ro.build.fingerprint= samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys
ro.build.hidden_ver= T999UVUEMJC
ro.build.product= d2tmo
ro.build.version.codename= REL
ro.build.version.incremental= T999UVUEMJC
ro.build.version.release= 4.3
ro.build.version.sdk= 18
ro.board.platform= msm8960
###KERNEL INFO
Linux
3.0.31-1804024
#1 SMP PREEMPT Sat Oct 5 00:13:48 KST 2013
armv7
GNU/Linux
Please let me know, thank you.
Click to expand...
Click to collapse
I was running this kernel on the same model and baseband with spirit rom Kit Kat 4.2.2. It was definitely a huge improvement over the stock kernel. Very responsive and great battery life. I would definitely recommend this kernel. Just make sure to make a backup of your old kernel in twrp manager before. Better safe than sorry.

OK, I'll give her a whirl and see how it does. Thanks @hatchet13rydin69
WHOOP WHOOP!
hatchet13rydin69 said:
I was running this kernel on the same model and baseband with spirit rom Kit Kat 4.2.2. It was definitely a huge improvement over the stock kernel. Very responsive and great battery life. I would definitely recommend this kernel. Just make sure to make a backup of your old kernel in twrp manager before. Better safe than sorry.
Click to expand...
Click to collapse

HollyWood88 said:
OK, I'll give her a whirl and see how it does. Thanks @hatchet13rydin69
WHOOP WHOOP![/QUOTE)
Don't thank me. All thanks go to lonelyskatter12 for his work on this awesome kernel and to all those that helped him compile it and test it. Hoping maybe we could get something like this for the Galaxy Core Prime
Click to expand...
Click to collapse

I have to say, it's a very nice kernel in terms of giving out great performance. However, every Rom i flash this kernel in, it seems to break the functionality of my baseband causing an error for my sim card not to detect. It's with the latest build of OCT-M-R3 build 10/25 and Slim Roms build 10/29 that I tried out with.
Any fixes for it?

Help
I'm new to this....Only flash ROM's...No Kernel yet.
My last update on my SGH-T999 is....cm-13.0-20161104-NIGHTLY-d2tmo
So for me is it good solution to flash that kernel on my phone?
I see there's a lot of function and updates that I don't have.
Thank You!!
:good:

Maxrom said:
I'm new to this....Only flash ROM's...No Kernel yet.
My last update on my SGH-T999 is....cm-13.0-20161104-NIGHTLY-d2tmo
So for me is it good solution to flash that kernel on my phone?
I see there's a lot of function and updates that I don't have.
Thank You!!
:good:
Click to expand...
Click to collapse
Just wait for the next kernel update, I hear SIM isn't detected on newer ROM updates.
And its easy.
1.) Copy zip to sdcard
2.) Wipe dalvik-cache & cache
3.) Flash kernel zip
4.) Reboot
5.) Enjoy it cx

Lonelyskatter12 said:
Just wait for the next kernel update, I hear SIM isn't detected on newer ROM updates.
And its easy.
1.) Copy zip to sdcard
2.) Wipe dalvik-cache & cache
3.) Flash kernel zip
4.) Reboot
5.) Enjoy it cx
Click to expand...
Click to collapse
Thank's Lonelyskatter12 ......For the SIM issue...It doesn't bother me.
I don't have a sim install on that phone.
I use it for testing and educational purpose....
:good::good:

[size=+1]Changelog[/size]
* Added 2 governors (Intellidemand & Ondemandplus)
* Added Power Efficient Workqueues
* Added The Intelli_plug 5.2 driver
* In sync with CM
* Added OOM throttle
* A few hotplug fixes. Still have more to do but this'll do until they are more stable.
* Added toggle for Gentle Fair Sleepers & Arch Power
[size=+1]Note:[/size]
*** Even tho linux version still says 3.4.112 it has the necessary patches for the "Dirty COW" exploit. Linux version will remain 3.4.112 as I have chosen to wait until CM officially merges 3.4.113 ***
thanks to @canodroid15 for notifying me & @decimalman for confirming the patch is in the kernel :highfive:

Wooty woot woot! ? Thy master is at it again! ??

Lonelyskatter12 said:
[size=+1]Changelog[/size]
* Added 2 governors (Intellidemand & Ondemandplus)
* Added Power Efficient Workqueues
* Added The Intelli_plug 5.2 driver
* In sync with CM
* Added OOM throttle
* A few hotplug fixes. Still have more to do but this'll do until they're are more stable.
* Added toggle for Gentle Fair Sleepers & Arch Power
[size=+1]Note:[/size]
*** Even tho linux version still says 3.4.112 it has the necessary patches for the "Dirty COW" exploit. Linux version will remain 3.4.112 as I have chosen to wait until CM officially merges 3.4.113 ***
thanks to @canodroid15 for notifying me & @decimalman for confirming the patch is in the kernel :highfive:
Click to expand...
Click to collapse
Is the sim issue fixed? I'd like to try this kernel
Sent from my SGH-T999 using XDA-Developers mobile app

Shack70 said:
Is the sim issue fixed? I'd like to try this kernel
Sent from my SGH-T999 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes