Develop Bugs

After flashing TWRP, will not boot system

Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!

if you have 3.0.2 i think there was a problem with early build causing this. there was a link posted for the new one that supposedly fixed it. or just use the 3.0.0 build.

Mike02z said:
Good morning,
I'm sure it's something I'm missing. I had my tablet unlocked and running fine with TWRP. I went to Omni then to Preview 2. All was well.
Last night I decided to try SuperSU 2.72. I factory reset my Pixel C by installing the latest firmware. I then used fastboot to flash TWRP. It goes into TWRP fine but now it will not boot system any longer. It goes directly into TWRP when I have it boot system. Is this an encryption problem. I've tried both TWRP versions and same behavior.
Any idea what I'm doing wrong?
Thanks!
Click to expand...
Click to collapse
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !

followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!

Mike02z said:
Thanks guys! I did go back to 3.0.0-0 and it now boots into system. I'll also try your repackaged version of 3.0.2-0. I'm on my work PC but I don't see a link to your version. Is my work PC just hiding it or can I find it somewhere else? Thanks again!
Click to expand...
Click to collapse
Here is the direct link for TWRP_dragon_3.0.2.0.img:
https://onedrive.live.com/?authkey=...&id=479EB75F5DD9DA59!131&cid=479EB75F5DD9DA59
Here is the complete folder: (TWRP flashable stock kernel)
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Cheers

Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.

redukt said:
Well in case of "recovery bootloop" start your device in bootloader mode and type "fastboot reboot" in command shell. That works mostly. No need to flash another recovery.
Click to expand...
Click to collapse
And connect everytime with PC to do a manual reboot via fastboot .. seems a little bit too much for a simple reboot. At least for me
A proper TWRP with proper vboot will boot always correctly, like the one from xceed.
Did you ever had to do a manual reboot on his version ?
Should be fixed at the root cause .. Hope you agree ?
Cheers

I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...

redukt said:
I think there´s a little missunderstanding
The fastboot command helps you to get out of "recovery bootloop". After this you can reboot your device how offen you want without issues.
And yes with all existing TWRP versions I had some reboot hickups and have solved it with the fastboot method...
Click to expand...
Click to collapse
Interesting .. I did not have any reboot issues with xceed TWRP versions .. I had to use the fix fastboot option once, but this is another topic.
But thanks for your information ...

followmsi said:
It seems some people have problems installing the NYCHitman1 TWRP version.
Most of them complaining because of boot problems.
To fix it:
Pls use xceed TWRP 3.0.0-0 version: http://forum.xda-developers.com/pix...official-twrp-2-8-7-0-pixel-c-dragon-t3288243
Or use my repacked TWRP 3.0.2-0 version : TWRP_dragon_3.0.2.0.img
Pls install TWRP via fastboot and boot directly into TWRP.
Install stock kernel (boot.img) via "fastboot" or use the TWRP flashable version from here: Update.ZIP_Nexus_Ryu_MXC89F-kernel_dragon.zip
Install SuperSU.zip 2.72 directly afterwards in TWRP - no reboot in between.
Download: http://forum.xda-developers.com/pixel-c/development/twrp-flashable-monthly-update-zip-pixel-t3375591
Good luck !
Click to expand...
Click to collapse
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.

Annan Denis said:
Hi.. after installing TWRP my phone nokia 3 TA-1020 I only booted to system once, when I restarted it later it does not boot the system but boots to TWRP. what can I do so that it will be rebooting to system instead of TWRP your help will be highly appreciated, thanks in advance.
Click to expand...
Click to collapse
Wrong device thread .. anyway just restore "stock" ROM/recovery to make it working again.
Good luck !

Issue when flashing TWRP

Hi guys
I am trying to install the latest TWRP, but every time that I try to boot into recovery through "adb reboot recovery" the phone restarts and I see the android maintenance logo.
What I did up to now:
1) I unlocked the bootloader following LG site instructions successfully. I have the bootloader unlocked message.
2) Downloaded TWRP to my windows PC for H815. After doing "fastboot flash recovery twrp-3.0.2-0-h815.img", the result seems to be successful as I get the expected OK message.
3) I try to reboot to TWRP through "adb reboot recovery" but every time goes to the maintainance logo. I tried also the button combination but I cannot see the Factory Reset menu or the TWRP menu.
Just to mention that I was completely stock V20d without root at the beginning and that the phone boots fine for the moment.
Please help.

No one had my issue? I am still trying to install TWRP and I only manage to boot it temporarily from the PC..

nasosgr said:
No one had my issue? I am still trying to install TWRP and I only manage to boot it temporarily from the PC..
Click to expand...
Click to collapse
twrp needs to be flashed from within twrp. First boot twrp:
> fastboot boot twrp.img
Now you install the image as recovery.

Jens1969 said:
twrp needs to be flashed from within twrp. First boot twrp:
> fastboot boot twrp.img
Now you install the image as recovery.
Click to expand...
Click to collapse
I think this was the first issue, but after I should also remove the "read only" from TWRP in order to keep it in the recovery.

nasosgr said:
I think this was the first issue, but after I should also remove the "read only" from TWRP in order to keep it in the recovery.
Click to expand...
Click to collapse
once you boot into twrp from abd. you must have flashable zip on external sd card then use twrp to flash the twrp zip then youll have twrp for recovery..

raptorddd said:
once you boot into twrp from abd. you must have flashable zip on external sd card then use twrp to flash the twrp zip then youll have twrp for recovery..
Click to expand...
Click to collapse
Not quite right. You can flash twrp image from twrp recovery. No need for a zip.

Jens1969 said:
Not quite right. You can flash twrp image from twrp recovery. No need for a zip.
Click to expand...
Click to collapse
It didnt worked fro me. i select img. and i got red error letters, then i flash it using zip and it worked.. i had both files on sd external card and on pc.

couldn't boot to twrp recovery after flashing cm14

hi'
i have flashed cm14 nightly with aroma (gapps) on cm13 on my oneplus 3
now i couldn't go neither to recovery mode nor to current cm 14 rom to change my rom
i am out of ideas i tried in every possible way to my knowledge pleasee help me ........................

Flash the modified twrp 3.0.2-22 via fastboot.

Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img

I had the same problem. Flashing modified twrp worked for me, thanks! But now if I to flash stock recovery (to install otas), I can't boot to recovery. E: oxygenos otas can be installed with twrp, so no problem anymore

plz send me the link of modified twrp
i coudnt find it on google properly plz

Try the link given by Demian3112. It works

THQ thq soon much.. Its working
Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Yes its working
Thank q very much

THQ thq soon much.. Its working
AJay27 said:
Try the link given by Demian3112. It works
Click to expand...
Click to collapse
THQ for ur valuable suggestion
My killer is back

Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Hii,
Still the problem remains same I will explain in detail
I am back to cm14.1 when I flashed twrp from the above link
When I tried to flash some other ROMs they are flashed but screen goes blank after oneplus boot animation,
If I flash 14.1 ROM it is working fine
From cmd non of the recovery where flashed only the above is working
Plz help me
I want to go back to stock soon

It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.

sanjumalik720 said:
It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.
Click to expand...
Click to collapse
ohhh
then what is the solution ?????

Thank you very much
Demian3112 said:
Get modified twrp here i assume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
I had the same problem as OP, got stuck with the CM 14 and did not like it (to early, to many bugs)
Wanted to go back to CM 13 but was unable to get into TWRP, and unable to flash CM13 back. Tried with fastboot and adb sideload, nothing worked.
The modified TWRP let me do i full wipe of the phone, (wiped Data, Dalik/ART, and system.) then copied the CM13 Stable release from here onto the phone, together with Gapps, and now everything is back to normal.
Again thank you, and thanks XDA! Somehow you always manage to save my ass after i messed with my device

Balaji Dasari said:
ohhh
then what is the solution ?????
Click to expand...
Click to collapse
Just flash the twrp image file again. The one you used before. Just flash it again. The same way you did back then.

How to permanently install twrp??

Hello everyone,
I tried twrp ...advanced....file manager.... to locate system/bin/ install recovery...etc file to rename or delete it but couldnt find the file!!.
The mi stock recovery keeps overwriting twrp after reboot so i have to reflash twrp using adb everytime i wanna use it
Device is mi max hydrogen miui(9). 8.1.4 beta. and the twrp version am using is 3.1.1.0

ron_hyatt said:
Hello everyone,
I tried twrp ...advanced....file manager.... to locate system/bin/ install recovery...etc file to rename or delete it but couldnt find the file!!.
The mi stock recovery keeps overwriting twrp after reboot so i have to reflash twrp using adb everytime i wanna use it
Device is mi max hydrogen miui(9). 8.1.4 beta. and the twrp version am using is 3.1.1.0
Click to expand...
Click to collapse
Try to flash with fastboot flash recovery (twrpname).img

himul said:
Try to flash with fastboot flash recovery (twrpname).img
Click to expand...
Click to collapse
Well,this is how i always flash twrp but stock mi recovery keeps coming back after a reboot!

ron_hyatt said:
Well,this is how i always flash twrp but stock mi recovery keeps coming back after a reboot!
Click to expand...
Click to collapse
The first boot after flashing TWRP need to be into recovery so TWRP could use his scripts to block the automatic restore of the stock recovery.
Also try the last TWRP version 3.2.1

himul said:
Try to flash with fastboot flash recovery (twrpname).img
Click to expand...
Click to collapse
bttcp12 said:
The first boot after flashing TWRP need to be into recovery so TWRP could use his scripts to block the automatic restore of the stock recovery.
Also try the last TWRP version 3.2.1
Click to expand...
Click to collapse
I used adb commands.:
fastboot devices.....fastboot recovery recovery.img......fastboot boot recovery.img.........Twrp boots ok ......from twrp menu i choose boot into recovery or turn off......same result with both.....when i hold vol up button+power.....the phone boots into mi recovery 3.0!!
Am I doing something wrong here?

ron_hyatt said:
I used adb commands.:
fastboot devices.....fastboot recovery recovery.img......fastboot boot recovery.img.........Twrp boots ok ......from twrp menu i choose boot into recovery or turn off......same result with both.....when i hold vol up button+power.....the phone boots into mi recovery 3.0!!
Am I doing something wrong here?
Click to expand...
Click to collapse
I only use
Code:
fastboot flash recovery twrp.img
Then
Code:
fastboot reboot
Entering recovery with the volume up key (at the same time that you click enter into adb)
Then into recovery reboot.

After booting into recovery install supersu (flash zip file) ,then boot into system.. try it..

[Recovery][TWRP] Mi 8 Lite TWRP-3.2.3 Multilanguage from 4pda

RECOVERY information:
Name Version: Xiaomi Mi 8 Lite Multilanguage TWRP
Download:
DOWNLOAD
MOD EDIT: Link removed, side is containing warez
How to install:
Fastboot just run .bat file to install it from fastboot mode
TWRP.img can be flashed manually from fastboot
all credits goes to @wzsx150, and poison-74 (4pda)

U know if this is compatible with latest Miui EU rom?
Is data decryptable?
Not entire related to Platina but Mi8 SE users are having trouble with twrp and miui eu.
Thanks.

Have downloaded and installed file recovery.img with twrp, works ok with xiaomi.eu rom.
I have MIUI 10 xiaomi.eu 9.1.10 android 9

lucainno said:
Have downloaded and installed file recovery.img with twrp, works ok with xiaomi.eu rom.
I have MIUI 10 xiaomi.eu 9.1.10 android 9
Click to expand...
Click to collapse
Can you enter in twrp and see if data folder is avalable?
Or it ask a password?

Go recovery no enter password, press cancell .
Before wipe Save All data to PC
(this action wipe All data and internal Memory) Wipe data factory reset and reboot phone
install update recovery.img multilanguage

Please help me, how enter to twrp recovery on Mi8 Lite ? I try all buttons combinations and nothing.

Power of phone
Press Vol + and Power for 5 seconds for enter recovery

Hi guys, I just went from Redmi5 Plus to Mi8 lite, unfortunately I have to wait for the famous 360 hours in the meantime I'm downloading what I need on the R5Plus was available Orange Fox recovery, which automatically decrypted the partitions without having to install lazy Flasch later, here how does this TWRP mod do this?
I would like to install the Xiaomi Eu as soon as I unlock the bootloader I am currently on last Global Stable 10.2.2.0 a help thanks.

It's work on android pie beta global 9.3.1?

this should be a new one:
MOD EDIT: Link removed, side is containing warez

This build does not work with Pie - can someone update the initial post?

excuse me sir, ust want to ask, after flashing twrp 1003 version why after reboot always revert to stock recovery, is there any to fix it, thanks
edit : i already fix it

falqon said:
excuse me sir, ust want to ask, after flashing twrp 1003 version why after reboot always revert to stock recovery, is there any to fix it, thanks
edit : i already fix it
Click to expand...
Click to collapse
Could you please share how you fixed it?
Just upgraded the ROM to 10.3.2.0 and now TWRP recovery always reverted to stock recovery after reboot.

reflash your twrp via adb and when u type "fastboot reboot" press and hold Volume Up until enter twrp, and then try to reboot recovery via twrp. i can't share youtube link, afk right now

falqon said:
reflash your twrp via adb and when u type "fastboot reboot" press and hold Volume Up until enter twrp, and then try to reboot recovery via twrp. i can't share youtube link, afk right now
Click to expand...
Click to collapse
Done this several times, but I didn't use hard buttons, instead i used fastboot boot recovery.img command to reboot to recovery after flashing recovery. I also tried rebooting to recovery from twrp without problem, but after rebooted to system, twrp reverted to stock recovery, everytime.
I didn't have this problem with MIUI 10.3.1.0 with the same TWRP.
edit : I'm using TWRP 0330 btw, and somehow there was no swipe to allow modification confirmation when the phone rebooted to twrp for the 1st time after flashing twrp.
Wonder why.

ne0t said:
Done this several times, but I didn't use hard buttons, instead i used fastboot boot recovery.img command to reboot to recovery after flashing recovery. I also tried rebooting to recovery from twrp without problem, but after rebooted to system, twrp reverted to stock recovery, everytime.
I didn't have this problem with MIUI 10.3.1.0 with the same TWRP.
edit : I'm using TWRP 0330 btw, and somehow there was no swipe to allow modification confirmation when the phone rebooted to twrp for the 1st time after flashing twrp.
Wonder why.
Click to expand...
Click to collapse
check your display panel via device hardware info on playstore, mine is synaptic, not all twrp version work on this panel, i'm using twrp 3.2.3-1003 btw
https://www.youtube.com/watch?v=7eeiSm7rzZY

falqon said:
check your display panel via device hardware info on playstore, mine is synaptic, not all twrp version work on this panel, i'm using twrp 3.2.3-1003 btw
https://www.youtube.com/watch?v=7eeiSm7rzZY
Click to expand...
Click to collapse
Tks, but I don't have problem with TWRP 0330, it works fine, including touch screen, the problem is TWRP get replaced by Stock Recovery everytime I boot my my phone to system.
I don't want to root my phone, just like to have TWRP recovery around so I can use it to flash hosts file for ads blocking and some other things.
Someone told me i need to flash lazyflasher...I'm going to do it later ..

ne0t said:
Tks, but I don't have problem with TWRP 0330, it works fine, including touch screen, the problem is TWRP get replaced by Stock Recovery everytime I boot my my phone to system.
I don't want to root my phone, just like to have TWRP recovery around so I can use it to flash hosts file for ads blocking and some other things.
Someone told me i need to flash lazyflasher...I'm going to do it later ..
Click to expand...
Click to collapse
Boot to recovery through fastboot and then flash the image or the zip through TWRP, then to flash it reboot again to TWRP before to boot up to system.

SubwayChamp said:
Boot to recovery through fastboot and then flash the image or the zip through TWRP, then to flash it reboot again to TWRP before to boot up to system.
Click to expand...
Click to collapse
Tried that too, actually more, boot to recovery from fastboot with fastboot boot recovery.img command and also hard button, boot to recovery from twrp recovery, flash recovery.img, boot to twrp recovery again twice, but stock recovery still came back.

ne0t said:
Tried that too, actually more, boot to recovery from fastboot with fastboot boot recovery.img command and also hard button, boot to recovery from twrp recovery, flash recovery.img, boot to twrp recovery again twice, but stock recovery still came back.
Click to expand...
Click to collapse
No. don´t try to boot to recovery from fastboot after to flash it, don´t flash it through fastboot.
Do the next three steps and see what happens but do it exactly the same or won´t worth the try:
- In fastboot delete recovery partition by typing fastboot erase recovery
- Then reboot to recovery (don´t flash it yet) by typing fastboot boot twrp.img (rename recovery image firstly to twrp)
- Now once in TWRP flash the zip or image to the recovery partition, when you finish go to Reboot options within TWRP and choose recovery to boot to it before to boot up to system. If you boot at this instance to TWRP then the issue have to be solved, reboot normally to system.
Edit: If this way the problem is not solved then after to install TWRP flash Magisk that can prevent it to be overwritten.