Develop Bugs

[HOW TO] Root a bootloader-unlocked Xperia Pro MK16a

There is now a MUCH easier way to root ALL Sony Ericsson 2011 phones including the Xperia Pro, making these instructions obsolete. Please see DooMLorD's thread here: http://forum.xda-developers.com/showthread.php?t=1319653
Remember to say thanks to DooMLorD for his awesome work!
However, I'll sill keep the 2 sets of instructions here in case anyone needs them or wants to refer back to them. My ZIPs do have all the drivers needed with good instructions on how to install them after all
My original instructions based on alvaroag's work can be found below, and the instructions via my instructions the Xperia Pro CWM Recovery method can be found on post 50 of this thread.
It's important to note that DooMLorD's tool only works for Windows. You can still use our original method in this post if you're running Linux.
We finally have a method to root the Xperia Pro MK16a (and PROBABLY MK16i) thanks to XDA Member alvaroag!!
This is his method, with the instructions modified by myself for ease of use.
What you need before you begin:
1. A rock hard stomach, because should the very unlikely happen and this brick/damage your phone in some way, I’m not responsible
2. An Unlocked Bootloader
NOTE: Sony offers a totally free, official, and simple method to unlock your bootloader here: http://unlockbootloader.sonyericsson.com/
Should that not work for you, your phone is probably SIM locked from your carrier (FIDO for example does that). You'll need to get the bootloader unlocked remotely from someone who has SETool and the appropriate security USB dongle. THIS COSTS MONEY, as SETool requires that user to pay per use.
Please see this thread for further instructions as it's the method I used personally: http://forum.xda-developers.com/showthread.php?t=1232050
Alejandrissimo was awesome at helping me through it.
3. On the phone itself navigate to the following locations:
a. Settings - applications – Make sure Unknown Sources (first option) is checked
b. Settings – applications – development – Make sure USB Debugging is checked
4. Download this archive. It contains all the files and drivers you will need:
http://www.mediafire.com/?7cz7672da9cxkrd​
Instructions:
1. Extract the archive you downloaded to a folder on your computer. Where doesn’t matter as long as you remember where it is.
2. Navigate to the folder ADB For Dummies (thanks to VanillaTbone for his guide) and install ADB for Dummies.exe
a. This will create a new folder on your C: drive called “android-sdk-windows”
3. Take the file “xperia_pro_root.zip” from the archive you downloaded and extract the contents to C:\android-sdk-windows\platform-tools\
4. Power off the phone and make sure it’s not plugged into anything.
5. Hold down the MENU button and connect the USB cable. A blue light will appear. If a blue light does NOT appear, then your phone can't get into FastBoot, and probably still has the bootloader locked.
a. If Windows asks you to install the drivers, install the driver from the folder “Fastboot Driver” in the archive you downloaded. Should those drivers not work, try the drivers found in "C:\android-sdk-windows\google-usb_driver"
6. Open the “Fastboot” folder in windows explorer (its part of the archive you extracted in step 1. Hold down the shift key and right click on an empty space in the folder window, select Open Command Prompt Here.
7. Type:
fastboot boot recoveryNEO.img​
8. The blue light on the phone will turn off, the screen on the phone will be blank, and the phone will be disconnected from windows, but after a few seconds you will get a Mass Storage & ADB Interface Detected. Note that the phone’s screen will continue to be black for the rest of this process. THIS IS NORMAL, your phone has not been bricked. If you need to stop anywhere along the way, simply unplug the phone from the computer and take your battery out. The phone will return to normal operations, though UNROOTED.
a. Windows will PROBABLY say hardware failed to install. This is fine.
i. Open the start menu, right click on “Computer” and select “Manage”
ii. Select Device Manager on the left side of the Computer Management window that opens.
iii. Look for the unknown piece of hardware. Right click on it and select update/install driver.
iv. Browse your computer, and select the main folder you extracted the archive to way back in step 1 – the drivers are somewhere in there, don’t worry about where, as windows will find them just fine.
9. On your computer navigate to “C:\android-sdk-windows\platform-tools”. Hold down the shift button on your keyboard and Right click on an empty part of the windows, and select “Open Command Window Here”
10. Type "adb shell". If it says "device not found", disconnect the USB cable, remove the battery, and try again from step 6. Also, try changing the USb port on your CPU. I'm not really sure about this, but I had to do it twice.
Now you’ll have to run a bunch of commands inside the ADB Shell window (the one with the black background and looks like a DOS window). You can just copy and paste each one from here. Be sure that once you start this step, you continue until the end of these instructions.
mount -t yaffs2 -o rw,relatime /dev/block/mtdblock0 /system​
If it says “/system is not empty” then type:
"rmdir /system/bin" and then run the first mount command again
type "exit"
11. From the DOS window, Run these commands (again copy and paste each one is fine)
adb push Superuser.apk /system/app/Superuser.apk
adb push su /system/bin/su
adb shell​
12. From the adb shell, run:
chmod 0644 /system/app/Superuser.apk
chown 0 /system/bin/su
chgrp 0 /system/bin/su
chmod 6755 /system/bin/su
ln -s /system/bin/su /system/xbin/su
cd
umount /system
reboot​
13. The adb shell will terminate. Disconnect the phone from the USB cable, wait for about 15 sec, remove the battery, and then turn it on.
14. From the phone, Open the Market, search for "Busybox" by "Stephen (Stericson)". Install that
15. From the Market, go to My Apps, search for "Superuser" by "ChainsDD" and make sure you're running the latest edition
16. Run the App "Superuser" from your app tray.
- under the settings tab, scroll to the bottom and click SU Binary "tap to check for updates"
17. Run the "Busybox Installer" app. Follow the onscreen instructions - just leave everything at default.
Congratulations! Your device should now be rooted! I personally suggest downloading and installing Titanium Backup to make sure - it will run a root check on startup and notify you if anything is wrong.
Notes:
This may seem to be a complicated method, but, as we will have to wait some weeks for an automated or simpler method, I think making writing an automated tool for this method is not worth the effort. But maybe, if no automated method appears in some weeks, I write one myself as a comunity contribution. - alvaroag​Thanks to VanillaTbone of XDA Developers for his awesome ADB For Dummies guide and app.
http://forum.xda-developers.com/showthread.php?t=502010
And of course thanks to Bin4ry for his NEO recovery image.
And thanks to all the other contributors to this thread for their help, advice, and overall contribution.
And if this thread helped you in some way, Please click THANK YOU to show your appreciation
Hello
Since there is no Xperia Pro forum I decided to post this here. Hope you can help me.
I recently bought an Xperia Pro MK16a and I have already unlocked the bootloader with setool (thanks to alejandrissimo and his remote unlock abilities). Now I'm searching for a way to root the device.
He and I experimented with it a bit, and we've already tried the recovery hot-boot with recovery.img from Arc, Play, and Neo, but with no luck. Recovery just doesn't boot.
He's guessing it's related to something like a different ramdisk or something like that.
Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse

rcummings100 said:
Hello
Since there is no Xperia Pro forum I decided to post this here. Hope you can help me.
I recently bought an Xperia Pro MK16a and I have already unlocked the bootloader with setool (thanks to alejandrissimo and his remote unlock abilities). Now I'm searching for a way to root the device.
He and I experimented with it a bit, and we've already tried the recovery hot-boot with recovery.img from Arc, Play, and Neo, but with no luck. Recovery just doesn't boot.
He's guessing it's related to something like a different ramdisk or something like that.
Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
If you bootloader is open you can flash directly "prerooted".img with fastboot? Arc and Neo have this option.
Regards!
Taavi
Sent from my MT15i using Tapatalk

Edit; ............
Sent from my LT15i using XDA App

taaviu said:
If you bootloader is open you can flash directly "prerooted".img with fastboot? Arc and Neo have this option.
Regards!
Taavi
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
To be able to generate a pre-rooted system.img you need first a rooted phone and this is exactly the problem, how to root it if there is no recovery for MK16
For sure RootXperia.zip will work but for install it the proper recovery is needed first i guess

XperienceD said:
There is a Mini Pro forum. ;-)
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
Totally different phone
This is just the "Xperia Pro" - it was released in August. It's the same phone as the Neo, but with a slide out QWERTY keyboard. Model is MK16a (or MK16i for the international one)

Gingerbreak??
Sent from my MT15i using Tapatalk

Alejandrissimo said:
To be able to generate a pre-rooted system.img you need first a rooted phone and this is exactly the problem, how to root it if there is no recovery for MK16
For sure RootXperia.zip will work but for install it the proper recovery is needed first i guess
Click to expand...
Click to collapse
How to do it? Generate prerooted system.img
Thanks!
Sent from my MT15i using Tapatalk

I think that NEO recovery should work:
http://forum.xda-developers.com/showthread.php?t=1183465
Maybe the keys are wrong mapped, you have to try a little. Just flash RootXperia.zip from Recovery and you are rooted.
Regards

Bin4ry said:
I think that NEO recovery should work:
http://forum.xda-developers.com/showthread.php?t=1183465
Maybe the keys are wrong mapped, you have to try a little. Just flash RootXperia.zip from Recovery and you are rooted.
Regards
Click to expand...
Click to collapse
That was the first thing I tried, since the Pro should just be a Neo with a keyboard. Unfortunately it doesn't work.
Here's the output:
C:\root-play>fastboot boot recoveryNEO.img
downloading 'boot.img'...
(bootloader) USB download speed was 9336kB/s
OKAY [ 0.517s]
booting...
(bootloader) Download buffer format: boot IMG
OKAY [ 0.002s]
finished. total time: 0.519s​
The phone is clearly still turned on, but no longer in fastboot mode, and the screen is totally blank, though the backlight is active.
I've tried the same thing with the Arc and Play recovery images and had the same results.
What do you mean by the keys are mapped wrong?
Is this what you're talking about?
http://www.knowyourcell.com/sony-er..._hard_reset_the_sony_ericsson_xperia_pro.html
The instructions on how to get into Recovery on that site are very similar to how to do it on the stock build of my previous phone, the Motorola Milestone. Unfortunately THEY DON'T WORK
I've tried substituting the volume down button with other keys, but with no success. Pretty difficult to guess the right key combination when there's a full qwerty keyboard on here
Is there a way to boot into the standard recovery from ADB or fastboot or something? Possibly from an on-board terminal emulator? A command like "Reboot Recovery" perhaps? Or is that too easy to be possible...
It's ironic that my old Motorola milestone with a totally locked down bootloader proved easier to hack than this phone with it's wide open bootloader

Well,
i wrote you already in PM. But now here too. The PRO is only released in Canada and some Asien Countrys. Until it is released in Europe i cannot help you, because i need the device for testing.
One thing you can try:
after you fastboot boot and the phone is in blackscreenmode please unplug and replug it to pc.
Now try to adb shell on it. Is this working? If yes please gimme a logcat
Regards

Bin4ry said:
Well,
i wrote you already in PM. But now here too. The PRO is only released in Canada and some Asien Countrys. Until it is released in Europe i cannot help you, because i need the device for testing.
One thing you can try:
after you fastboot boot and the phone is in blackscreenmode please unplug and replug it to pc.
Now try to adb shell on it. Is this working? If yes please gimme a logcat
Regards
Click to expand...
Click to collapse
Nope, adb shell doesn't work. Shows "error: device not found"
But because I'm new to this (I came from a motorola milestone), I want to make sure I did what you actually asked of me:
- I turned on the phone into fastboot mode (hold down menu, plug in usb cable, get blue light)
- from a command prompt window: fastboot boot recoveryARC.img
(replacing ARC with NEO and PLAY depending on the image I'm trying)
- phone now boots into black screen, no blue light, screen backlight is on
- unplug from computer, plug back in
- from command prompt: adb shell
Are those the instructions you wanted me to follow?
Fastboot works fine. Can I do anything from there? Getvar for example, or something? can I run the command Update and flash the RootXperia.zip file? Or will that not work because it's not signed properly or something similar?

Via fastboot you cannot flash the zip. Zip needs to be flashed via recovery, because this only contains some files and not whole system!
I'm sorry, you have to wait until i have the device! Only if the adb shell would work i could help you, if even this is not working it's hard to say what's goin wrong. All you can do is sending me the kernel.sin from you firmware. Maybe i can mix something up with this file
Regards

Bin4ry said:
Via fastboot you cannot flash the zip. Zip needs to be flashed via recovery, because this only contains some files and not whole system!
Click to expand...
Click to collapse
I figured as much. Just hoped I might be wrong.
Bin4ry said:
I'm sorry, you have to wait until i have the device! Only if the adb shell would work i could help you, if even this is not working it's hard to say what's goin wrong. All you can do is sending me the kernel.sin from you firmware. Maybe i can mix something up with this file
Regards
Click to expand...
Click to collapse
Can anyone give me instructions or pointers on how I extract the kernel.sin from my firmware?
Thanks for your continued patience with me. I really do appreciate it.

Its funny how all the phones without forum ends up here!
Sent from my LT15i using xda premium

datagubben said:
Its funny how all the phones without forum ends up here!
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
It's because they're all so similar, and are based on the same hardware as the Arc.

Process is simple:
IF you NEVER used UpdateService or PCCompanion BEFORE you unlocked your bootloader then : You need to relock bootloader first (sorry :/)
Then have to use SonyEricsson UpdateService/PC-Companion and tell it to REINSTALL/REPAIR your firmware.
If you used one of the tools before just skip the relock and do this:
After that is done you copy out the two files named:
FILE_XXXXXXXXXXX
FILE_XXXXXXXXXXX
where XXXXXXXXXX are some numbers. This files are located in the subfolder blob_fs inside the UpdateService/PC-Companion directory.
Just copy it on a "safe" place.
After that is done you have to start flashtool go to the "Advanced" Tab -> Decrypt -> then just choose the folder where you copied the files and let flashtool do its work
Afterwards upload the Firmware which is now present as a FTF file, somewhere and post it here (others will be happy to to have the whole MK16a Firmware )
Regards

Bin4ry said:
Process is simple:
IF you NEVER used UpdateService or PCCompanion BEFORE you unlocked your bootloader then : You need to relock bootloader first (sorry :/)
Then have to use SonyEricsson UpdateService/PC-Companion and tell it to REINSTALL/REPAIR your firmware.
If you used one of the tools before just skip the relock and do this:
After that is done you copy out the two files named:
FILE_XXXXXXXXXXX
FILE_XXXXXXXXXXX
where XXXXXXXXXX are some numbers. This files are located in the subfolder blob_fs inside the UpdateService/PC-Companion directory.
Just copy it on a "safe" place.
After that is done you have to start flashtool go to the "Advanced" Tab -> Decrypt -> then just choose the folder where you copied the files and let flashtool do its work
Afterwards upload the Firmware which is now present as a FTF file, somewhere and post it here (others will be happy to to have the whole MK16a Firmware )
Regards
Click to expand...
Click to collapse
Unfortunately the very first thing I did with the phone was unlock the bootloader. 'Fido' is the only phone company selling the phone, but I'm with 'Rogers'...so I needed to unlock the bootloader in order to actually use the phone as a phone, which was and remains the most important thing to me.
That being said, I'll see if Alejandrissimo can give me a hand with re-locking the bootloader, then I can get the firmware as you instructed, then have him re-unlock the bootloader. I'll just stick my SIM Card back in my old motorola milestone while we work on this so I can still have a working phone.
You're awesome Bin4ry for helping like this

Maybe I could help with that since I am with Fido and I have a locked bootloader (I haven't touched the phone except adding an ssh key) with my Xperia Pro MK16a. Though I know my way with ssh, I am new with the rooting stuff and Android. If you need some files or something from a locked bootloader I can help with that, just need some simple instructions.
Bin4ry said that files FILE_XXXXXXXXXXX were located under UpdateService/PC-Companion, can I access those via ssh? I have used PCCompanion only once when I got on Windows, but I am always on Ubuntu so I was wondering if I could get those file via scp and if so, where are they?.

ratius said:
Maybe I could help with that since I am with Fido and I have a locked bootloader (I haven't touched the phone except adding an ssh key) with my Xperia Pro MK16a. Though I know my way with ssh, I am new with the rooting stuff and Android. If you need some files or something from a locked bootloader I can help with that, just need some simple instructions.
Bin4ry said that files FILE_XXXXXXXXXXX were located under UpdateService/PC-Companion, can I access those via ssh? I have used PCCompanion only once when I got on Windows, but I am always on Ubuntu so I was wondering if I could get those file via scp and if so, where are they?.
Click to expand...
Click to collapse
If you could, that'd be great. I don't especially want to lock my bootloader over again since you have to use SETool to unlock it, which costs money each time you use it (essentially). Not to mention it involves some acrobatics with a paperclip to connect a testpoint inside the phone to a ground!
Unless there's an easier way to lock/unlock now that I've done it once that is...if so, I'm happy to do it.
As for accessing the files Bin4ry is talking about, boot to windows if you can and do it that way. Just follow his instructions to repair your firmware, then go to that folder in windows (it's located in C:\Program Files (x86)\Sony Ericsson\Sony Ericsson PC Companion). At least, that's my understanding.

Hi. Yesterday, I bought a Xperia Pro. Ive spent most of the afternoon and the nigh trying to root it, and I've finally got how to do it. It's a manual method, as there is not an automated one.
There's no need to say I'm not responsible for any damaged or bricked devices(but mine is working ok )
What you need:
1. The Xperia Neo Recovery, by Bin4ry, get it here
2. xperia_pro_root.zip I'm attaching. It contains the files from RootXperia.zip, but without the update.zip-related files, as they are not needed.
3. The Android SDK, with the Google USB Drivers Package.
4. If you've never used your device in fastboot mode, you may also need to follow steps 7 & 8 from SE bootloader unlocking tutorial.
5. [NOT REALLY SURE] Application Debugging & Unknown Sources enabled.
6. [NOT REALLY SURE] Unlocked Bootloader. This is because mine is unlocked, but I don't really know if that is required to boot the recovery image via fastboot.
I'm assuming that you are working on a Windows/Unix terminal, with a working directory where you have recoveryNeo.img, Superuser.apk and su /these two from the zip file I attach), and that fastboot & adb are on the PATH. If some file is not on the working directory, or fastboot/adb are not on the path, use full paths.
Instructions:
1. Disconnect & Power off the phone.
2. Hold down the menu button and connect the USB cable.
(If Windows asks you to install the drivers, install the driver from ANDROIDSDK\extras\google\usb_driver folder).
3. Run "fastboot boot recoveryNeo.img". The fastboot device will be disconnected, but after a few seconds you will get a Mass Storage & ADB Interface Detected.
4. Run "adb shell". If it says "device not found", disconnect, remove the battery, and try again from step 1. Also, try changing the USb port on your CPU. I'm not really sure about this, but I had to do it twice.
5. Run "mount -t yaffs2 -o rw,relatime /dev/block/mtdblock0 /system" from the adb terminal. If it says /system is not empty. run "rmdir /system/bin" and then run mount again.
6. type "exit"
7. Run :
adb push Superuser.apk /system/app/Superuser.apk
adb push su /system/bin/su
adb shell
8. From the adb shell, run:
chmod 0644 /system/app/Superuser.apk
chown 0 /system/bin/su
chgrp 0 /system/bin/su
chmod 6755 /system/bin/su
ln -s /system/bin/su /system/xbin/su
cd
umount /system
reboot
9. The adb shell will terminate. Disconnect the phone, wait for ~15 sec, remove the battery, and then turn it on.
10. Your device should now be rooted.
Notes:
1. When booting with recoveryNeo.img, the screen will keep blank. That's normal(I think).
2. This may seem to be a complicated method, but, as we will have to wait some weeks for an automated or simpler method, I think making writing an automated tool for this method is not worth the effort. But maybe, if no automated method appears in some weeks, I write one myself as a comunity contribution.
Hope this is usefull for you.

[Tutorial] Rooting Your Device in Linux

Root Galaxy Nexus (Either GSM or LTE) in Linux (Personally in Ubuntu)
Disclaimer: I am not at fault for anything you have done to your phone (ie. Brick, break, etc.). You are doing this at your own discression. I am merely stating what I did to unlock/root my phone.
Tutorial Broken Down Into Three Sections
I. Unlocking the bootloader
II. Installing Clockwork Mod Recovery
III. Installing SuperUser
Resources
1. Super User (used by flashing in Clockwork): http://download.clockworkmod.com/test/su.zip
You can get the latest version here: SuperUser by ChainsDD
2. Clockwork – based by carrier
1. Verizon (CDMA) version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.4-toro.img
MD5:*b2d31c29b7ef785f9c0802a12264d322
File size:*5,263,360*(bytes)​
2. GSM version: CMW Galaxy Nexus
File name:*recovery-clockwork-5.5.0.2-maguro.img
MD5:*445887336a863573997ccbaeedddc984
File size:*5,427,200*(bytes)​
Unlocking Bootloader
Part 1: Unlock
1. First off, you need to download the adb drivers. There have been mentions of just getting the drivers, but I actually have the entire SDK. You can download it here. http://developer.android.com/sdk/index.html
2. Plug in your device, then open up Terminal (Ctrl + Alt + T) and type in: “lsusb” (without quotes). This will pull up all the devices plugged into your usb slots. Look for the one that says samsung (others have found google, but please make note).
3. Find the device, then find where it says ID. After where it says ID, it should have a number/letter mix such as “04e8” or such. Make note of that for later.
4. Go to http://developer.android.com/guide/developing/device.html . This will give the instructions on how to Install the device drivers (specific to each manufacturer). Start from where it says “4. Set up your system to detect your device.”
5. Go to your internal and cd to platform-tools. (This should include both adb and fastboot.) Put your phone into fast boot. (Do this by holding the power, volume up, and volume down buttons while phone is off).
6. Once in fastboot, go back to your computer and type in “sudo fastboot oem unlock”. This will bring up the option to unlock your phone's bootloader on your device's screen. It will give you a disclaimer, and it will say that if you unlock, it will wipe all of your phone's data. Scroll to Yes using the vol up or vol down buttons, and select it with the power button.
7. If you boot straight from there, you will go through a series of boot loops (it was 2 for me) then will be prompted to go through the process of setting up your Google account again. again.​
Congratulations, your phone is now unlocked. However, this doesn't mean that you have rooted your phone.
Rooting
Part 2: Putting Clockwork Mod Recovery On Your Phone
(do step one for preparation of Part 3)
1. First, we will want to push su.zip to your phone's Internal storage or “sdcard” partition. Open up Terminal and type the command “adb push 'directory_of_su.zip'/su.zip /sdcard/”. Hit enter/return and it should transfer over. (Based on the quality of usb cord, times of transfer may vary.)
To make this easier, put su.zip into the directory of adb. Then all you have to use for the command is “adb push su.zip /sdcard/”.​EDIT:
After you root, you have to delete /system/recovery-from-boot.p and reflash or else every time you reboot, the recovery partition will be written over by android. This can either be done in terminal (phone or comp) or by a file manager with root access (such as Root Explorer).
Reference: http://forum.xda-developers.com/showthread.php?t=1392336
Thanks vihil
2. Put your phone in fastboot mode again (vol up + vol down + power)
3. Go back to Terminal and type in “fastboot flash recovery 'whatever the file name is'”. This will flash CWM (Clockwork Mod) onto your phone, deleting your phone's stock recovery image.
EDIT: If it doesn't work, i.e. due to permissions, run with sudo​
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.​
Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Special Thanks to scary alien on androidforums.com and jcarrz1 on XDA

Reserved
Reserved......

Thanks a lot I was looking for exactly this. Appreciated. Will try in a few hours when I get my phone.

Downloaded the sdk file but have no idea what to do. My windows computer died and it would be a lot easier on that to do all this but all I have is a computer with linux currently so if anyone would be kind enough to tell me how to install sdk I'd appreciate it. I seen the read me and seen it says execute "android" first but I don't know how to do that. I realize this is incredibly annoying to the xda hive mind trust me I hate needing help like this I'm nothing close to a noob as far as rooting flashing and all that good stuff I'm just unfortunately stuck with only Linux. I'd really really appreciate it.

under the tools folder there is a script called android, u can either run it in a terminal or hopefully if u were to click it, it was ask if u want to run it!

If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.

Seems like my fastboot is stuck on `waiting for device`. I have the fastboot screen on my GN.
Before rebooting into fastboot `adb devices` successfully showed a device (i.e., usb debugging is enabled, dunno whether it is needed for the unlocking):
$ fastboot oem unlock
< waiting for device >
Any idea?
EDIT: Found the solution. After doing a `fastboot devices` it told me "no permissions fastboot" so I needed to be root on my computer for it to work.

FadedLite said:
If you want to run it, you can just cd to it in terminal, then do "./android" and that should do the trick.
./ is the way you execute scripts in linux.
Click to expand...
Click to collapse
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.

C-4Nati said:
Thank you! That worked correctly and installed it. Now the next step to check the usb and if its there does not work, I might be entering this incorrectly but I typed just lsusb and enter nothing happened, held down ctrl, alt, t then typed in lsusb and nothing happened then just copied that entire part encase I was suppose to and got this.
[[email protected] ~]$ (Ctrl, Alt, T): lsusb
bash: syntax error near unexpected token `:'
Like I said I'm not expecting help because I know XDA doesn't like noobie questions, I will be greatly appreciative if you have patience with me and will even be willing to donate once I unlock the BL and root it. Thank you again.
Click to expand...
Click to collapse
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system

For simplicity, you can shorten that to: mount -o rw,remount /system
You can also delete it from a terminal on the phone or any file manager that allows root access. I think the free ES file explorer has root options.

vihil said:
You don't really need that step. Since '04e8' is Samsung and you have a Samsung device it will likely always be 04e8.
Part 1, 3. and 4. can be summarized as following:
Put the following line into /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Execute: chmod a+r /etc/udev/rules.d/51-android.rules
Type the following to verify it is working: "adb devices" It should display something like:
List of devices attached
01492B093401000F device
Part 1, 6. should probably changed to "sudo fastboot oem unlock"
Also, Part 2, 1. the preparation makes no sense to me: "(do step one for preparation of Part 3)". How can I go into Clockwork recovery before completing Part 2? Since Part 2 is about installing Clockwork...
Edit: And I just realised, C-4Nati, you should not write the "(Ctrl, Alt, T):" out.. that's just a shortcut to open a terminal. Just "lsusb" is fine. Then it should work.
---------- Post added at 11:33 AM ---------- Previous post was at 11:09 AM ----------
For anyone wondering why the step by step instructions in the OP do not work:
You need to flash the Clockwork recovery and install su.zip before you can remove the /system/recovery-from-boot.p (and if you follow that link provided it will cost you around $3.50 but you should be able to do it manually, will try to figure it out).
---------- Post added at 11:38 AM ---------- Previous post was at 11:33 AM ----------
(I couldn't find the /system/recovery-from-boot.p on my GN filesystem but maybe someone else does)
To remove /system/recovery-from-boot.p:
$ adb shell
$ su
# mount -o rw,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
# rm /system/recovery-from-boot.p
# mount -o ro,remount -t ext4 /dev/block/platform/omap/omap_hsmmc.0/by-name/system /system
Click to expand...
Click to collapse
for needing to type in lsusb, i found that as somewhat of a precaution. I had seen on other threads that others had their device show up as either google or samsung. So i just figured rather check first instead of installing both or something.
for the preparation, basically you do that since your phone is already on. after flashing cwm, you would have to boot back into your phone, push the file to your sdcard, then boot back into recovery. All it does is that it saves just a bit of time.
As for the sudo fastboot, I didn't actually have to do that, but i'll add it, Thanks.
As for the cwm terminal commands, i'll add that as well. Thanks again.

FadedLite said:
Part 3: Flashing Super User onto your phone.
1. Next, go into Clockwork by hitting the volume up or down buttons till you see recovery mode. Hit the power button to enter Clockwork.
2. Scroll down (using volume buttons) till you get to “install zip from sd card”. Use the power button to select it.
3. Scroll down to “su.zip” and select it. Then, hit the selection for installing the zip file.
4. Go back using the “Go Back” selection to return to the main screen.
5. Reboot the system using the “reboot system”.​Congratulations! You now have Root access!!!
Have fun with Flashing ROMs!
Click to expand...
Click to collapse
not yet. after flashing su-bin-3.0.3.2-efghi-signed.zip (which is just the binary), the user still needs to flash Superuser-3.0.7-efghi-signed.zip, to have Superuser.apk placed in /system/app, otherwise GUI apps won't have access to su. (unless, of course, the zip you are linking here has them both)
It's preferable to have users linked to ChainsDD website, there people will find latest binaries and Superuser.apk. I also don't see any mention to him in the OP. Even if this is a tutorial, don't forget to give credit where needed.

Some help for an Ubuntu Noob/Not a Noob to Windows
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar

jmartino5920 said:
Hi all,
Long story short, I no longer have Windows (nor a way to load Windows without a purchase; I'd rather not). So I have a fresh install of Ubuntu Linux 11.10. I have read this guide and some of the helpful responses and have yet to be able to get adb and fastboot up and running. I am beginning to understand the nuances of Ubuntu and have tackled adb and fastboot in Windows but Ubuntu is different. I would say I have put in two 12 hour sessions with no desire to pack it in and go back to Windows (I am avoiding a VM as well).
Here is where I seem to be stuck (mind you I have done a fresh install numerous times to start with a fresh playing field in case I have messed up something): Whether downloading the full SDK through Eclipse (cos I'd like to dev apps soon and why not have it?) or downloading the SDK on its own, I get it without fail. The steps leading up to entering in commands for terminal so that the computer recognizes either just my Nexus or a slew of OEMs are easy enough but maybe I am messing up. It is where getting the computer to see my device (udev steps) I can't seem to get it right. I have even looked at other guides for reference (most seem messy and convoluted) but keep coming back here.
I know you probably need more to go on and I am sooooooo willing to tell more. I just hope someone is down to help a brother out. Like I said, I just need some direction. I have manually rooted and all that jazz, just in windows. Thanks in advance for your help.
jmar
Click to expand...
Click to collapse
Are you getting a "waiting on device" message or something similar when you run adb or fastboot?
Forget about the udev nonsense (not important really until you start developing full time) and just drop a sudo before your commands.
You can shoot me a PM or a gtalk (same username as my xda) if you want and I'd be more than happy to help you get your system going.

Thanks, still a bit more annoying that Windows but this tutorial makes it easy.

Sorry if this is ignorant, but can I use these instructions with Unix & terminal on Mac OS X? I'm thinking yes???

I rooted mine in linux as well... No problems. For some reason I was able to do it much easier though...
I did the fastboot oem unlock step above (Part 1). Rebooted then installed superuser from the android market. Then I installed Clockworkmod from the android market.
Done.
Not sure if I'm missing out on something by doing it this way but so far I've had no issues....

[ROOT]How to Root KVT49L.D85110r and Install TWRP. My experience

I am not sure if this is the correct forum for this. Moderators, Please feel free to remove it or relocate it
First of all thanks to all amazing people on this forum ( thecubed,777jon,Dees_Troy, chainfire, supernoman, crashfocus, etc)
This is not my work . It is a compilation of what it worked for me from the work made by others. It is directly toward newbie users.
Instructions
1- Make sure you install LG G3 drivers in your computer( you can get them attached on this thread). Connect phone to the PC using USB cable. Make sure the phone is recognized when you plug it in with the usb cable
Also phone shall be connected as Media device (MTP), if it is in Charge Phone change it to MTP.
Scroll down this post. You will find the correct usb drivers attached. Install them in your pc.
2- Enable Developer options in your phone on Setting > General> About phone > Software information > and click seven times Build number until it enables it
3- Enable USB debugging on your LG G3 from your phones Settings > Developer options > tick ‘USB debugging’ check box. A window should pop up in your phone display to allow USB debugging. Select Allways Allow from This Computer and hit OK.
It will also be convenient to Enable installation of apps from Unknown Sources: Open phone’s Settings » select Security » Tick the “Unknown sources” check box (under Device administration section)
4- Download and unzip
- Pupledrake-Lite at http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-Lite_R03.tar.gz Thanks to Codefi.re
- Download and unzip the attached ADB LOCAL READY with TWRP recovery.img
Thanks to @Dees_Troy & TeamWin - for TWRP Touch recovery
ATTACHMENT IS HERE- JUST CLICK HERE
5- Download -Latest SuperSu at http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip Thanks to Chainfire
6- Transfer UPDATE-SuperSU-v2.40.zip to the internal sdcard
7- Open Purpledrake-Lite and Run purpledrake_windows.bat. It should detect your devices if it is not, you need to check if the drivers were installed properly and unplug-plug back your phone.
Hit Enter as instructed on the computer screen until it gains temporary root.
IMPORTANT : READ AND DO NOT CONTINUE TO PERMANENT ROOT INSTRUCTIONS DISPLAYED. FOLLOW INSTRUCTIONS TO CONTINUE WITH ADB INSTEAD.
Hit Ctrl+C to exit to use adb.
This process takes a few seconds and The phone start on download mode and it will stay on it.
8- Open ADB LOCAL READY folder you downloaded and hit Start Here.bat
Type "adb devices" to ensure that your phone is connected and it accept adb commands . On list of devices attached it should show LGD851........
Unplug it and plug it back if it is not .
NOTE: SOME PEEPS HAVE REPORTED PROBLEM WITH ADB NOT WORKING PROPERLY ON USB 3.0 PORTS. PLEASE USE USB 2.0 PORTS
9- Type "adb push recovery.img /temp"
You will see that it pushes the data. it should take a few seconds
Note: you may need to push it a few times if you do not find the recovery file on the /temp folder when you do step 12.
Some members stated that they need to push it ..5 times.
rubbamade tip
" This does work. If after you do the "adb push....", Hit the up key on your keyboard. What you just typed " adb push...." will appear again. Hit enter. It will "push" again. Hit up again. Hit enter. Do this at least 5 times. Now proceed with next step "adb shell"..... Should work now"
For some reason others user needed to push it more than 5 times, i assume that it is due to the file size of the image and your operating system and pc settings(i used win7). It is recommended to verify if it was pushed on step 12.
10- Type "adb shell" and it should go to shell command $
11- Then type "/temp/fakesu". This will put you in a superuser shell on your device. It should show su command line # .
12- Type "ls /temp" to make sure that recovery.img and fakesu are in /temp folder . If it is not, then you did not complete correctly the above instructions..repeat it
13- Type "dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery". it will take a few seconds to complete and install TWRP recovery.
14- Type type "reboot recovery" It should boot onto TWRP Touch recovery. it could take a few but it should
15- Once in TWRP, select install,go to the SD card directory, select UPDATE-SuperSU-v2.40.zip and install it. Reboot the phone once complete. Do not panic, it should take a while to cook and update applications, but it will, be patient.
16- Your device is rooted and with TWRP custom recovery. IF you do not see SuperSu in your application drawer, do not panic, just install it from the Play Store.
17- Now you are ready to install custom Roms, any application that requires root, or enjoy root features.
Quick References
How to Boot into TWRP(Recovery Mode)
1.Turn off your phone
2.Now, press and hold Power and Volume down buttons at the same time.
3.When the LG logo appears, release the keys.
4.Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
5.Press volume down to Select "YES" on reset data. Do not panic, it will not . Select "yes" again . It will boot into TWRP recovery mode.
If you do not like hardware method you can use Quickboot or TWRP Manager applications from the Play store
How to Boot LG G3 Download Mode
-Disconnect your phone from PC.
-Power off your G3 and wait 4-5 seconds after lights go off.
-Hold the Volume Up button on phone, and while holding it, connect the phone to PC using a USB cable
If you get the "Windows cannot find '.\assets\windows\bin\mintty.exe'." error..on purpledrake temproot step 7.
Try just double-clicking on the .bat instead of running as admin.
Also make sure the script is extracted properly first before running
Disclaimer: It worked for me, but I am not responsible for any damages to your phone.

Your experience is very interesting vcurbel!
I was under the impression there was no way to root untouched stock 10R.
It would appear you have found a way! :good: Thanks for your contribution.
I am curious if anyone else has replicated this?

thank you so much had a little trouble but successfully rooted my device

Where was this guide yesterday?
Last week I just thought rooting build R was impossible as of yet, got fed up, and 5 minutes ago ran the LG Update tool to revert my phone back to stock/ Build C and root that way.

vcurbel said:
I am not sure if this is the correct forum for this. Moderators, Please feel free to remove it or relocate it
13- Type "dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery". it will take a few seconds to complete and install TWRP recovery.
Click to expand...
Click to collapse
dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
This command doesn't work for me. It shows, "cannot open for read: no such file or directory".
Can you help?
Edit: Nevermind, had to repush recovery. Didn't go through properly the first time. Thank you
Everything worked great. Thank you for the guide! Rooted on 10r!

NO GO
- Type "ls /temp" to make sure that recovery.img and fakesu are in /temp folder . If it is not, then you did not complete correctly the above instructions..repeat it
AT THIS POINT I AM GETTING "NOT FOUND". DID THE STEPS ABOVE SEVERAL TIMES.
I saw 8xxxkb data pushed after 'push'
==========================================================================================
C:\Users\nick\Downloads\ADB LOCAL READY>c:\windows\system32\cmd.exe
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\nick\Downloads\ADB LOCAL READY>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
LGD851xxxxxxxx recovery
C:\Users\nick\Downloads\ADB LOCAL READY>adb push recovery.img /temp
9716 KB/s (11245568 bytes in 1.130s)
C:\Users\nick\Downloads\ADB LOCAL READY>adb shell
[email protected]:/ $ /temp/fakesu
/temp/fakesu
# Is /temp
Is /temp
/temp/fakesu: Is: not found
#
=========================================================================================

sharkoparko said:
- Type "ls /temp" to make sure that recovery.img and fakesu are in /temp folder . If it is not, then you did not complete correctly the above instructions..repeat it
/temp/fakesu: Is: not found
#
=========================================================================================
Click to expand...
Click to collapse
try to redo step number 7. But, you are getting into su command line which is #
after you do the ls/temp on su #, you should get the list of files in your temp folder.....check if recovery and fakesu are there
then continue to step 13

vcurbel said:
try to redo step number 7. But, you are getting into su command line which is #
after you do the ls/temp on su #, you should get the list of files in your temp folder.....check if recovery and fakesu are there
then continue to step 13
Click to expand...
Click to collapse
Thanks. I did it several times, I did number 7 also. Phone is found, it says creating permaroot....Once I click CTRL C screen disappears then I go to ADB file and follow procedures. IT STILL DOES NOT WORK
===================================================================================
Welcome to PurpleDrake!
Please ensure your phone is connected, powered on, and USB debugging is properly enabled.
Your phone should be showing your homescreen with no other apps open. This is to ensure a clean state.
When you're ready, press [enter]...
Press [enter] to continue...
Waiting for device... Found device!
Your phone is a [ LG-D851 ] on [ TMO ] running SW version [ V10r ] ...
Alright. We're ready to go. We're going to temproot your phone first. Press enter when you're ready!
Press [enter] to continue...
Rebooting phone...
Waiting for device... .... Found device!
Found device, checking if vulnerable...
Yep, performing temproot...
Waiting for system to settle...
Temproot worked, all done here. Moving on...
Alright, now that you're temprooted, you can press CTRL-C here and get
a temproot prompt through 'adb shell /temp/fakesu' if you're so inclined...
However, if you'd like to permaroot, let's continue.
Press [enter] to continue...
===============================================================================================
DO I NEED TO RE-ROOT?

sharkoparko said:
Thanks. I did it several times, I did number 7 also. Phone is found, it says creating permaroot....
DO I NEED TO RE-ROOT?
Click to expand...
Click to collapse
Here is the problem. You pressed to continue (enter) to create permanent root after temporary root was created
You need to press CTRL C instead , then it will exit......then continue to next step with ADB LOCAL READY.
Ill clarify this better on step 7.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

vcurbel said:
Here is the problem. You pressed to continue (enter) to create permanent root after temporary root was created
You need to press CTRL C instead , then it will exit......then continue to next step with ADB LOCAL READY.
Ill clarify this better on step 7.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Once I click CTRL C screen disappears then I go to ADB file and follow procedures. IT STILL DOES NOT WORK
That's what I do. I clicked enter first time rooting following purple instructions. Then I realized it does not work with January update. I run purple drake again (after I found this "fix") and, as I said, I DO NOT PROCEED WITH ENTER. I use CTRL C. The window closes and I open ADB, then click start hereand follow the rest of the procedures. So YES I did click enter once initially (because purple drake post is not updated that it does not work with JAN 15 update).

sharkoparko said:
Once I click CTRL C screen disappears then I go to ADB file and follow procedures. IT STILL DOES NOT WORK
That's what I do. I clicked enter first time rooting following purple instructions. Then I realized it does not work with January update. I run purple drake again (after I found this "fix") and, as I said, I DO NOT PROCEED WITH ENTER. I use CTRL C. The window closes and I open ADB, then click start hereand follow the rest of the procedures. So YES I did click enter once initially (because purple drake post is not updated that it does not work with JAN 15 update).
Click to expand...
Click to collapse
Ok....lets do it one at a time
Once you open and run ADB LOCAL READY. When you type adb devices, is it show your device?
Let me know on which step you got stuck.
Ill try to help you
Sent from my LG-D851 using XDA Free mobile app

Just got home with a Craigslist buy.
rooted in 15min thanks vcurbel !
now to find CM12 for this baby

hi sorry for the newbiness but for some reason i donload everything i need, basically preperation is done to the T, but as soon as i click on purpledrake_windows.bat it goes into dos window and complety exits out in less then a second, so fast that i can barely read whats on that lil black screen, im pretty sure i can make out "command not found" at the end of it..any help would be greatly appreciated

tomez206 said:
hi sorry for the newbiness but for some reason i donload everything i need, basically preperation is done to the T, but as soon as i click on purpledrake_windows.bat it goes into dos window and complety exits out in less then a second, so fast that i can barely read whats on that lil black screen, im pretty sure i can make out "command not found" at the end of it..any help would be greatly appreciated
Click to expand...
Click to collapse
Did you run it as Administrator?
Did you install LG drivers and the device is being recognized as Media device?
Sent from my LG-D851 using XDA Free mobile app

all drivers are installed, the device is recognized, and nothing, when i do run it as administrater i get a whole different error msg
vcurbel said:
Did you run it as Administrator?
Did you install LG drivers and the device is being recognized as Media device?
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
---------- Post added at 08:43 AM ---------- Previous post was at 08:38 AM ----------
windows cannot find '.\assets\windows\bin\mintty.exe'. Make sure you type the name correctly and try again...thats the error i get when trying to run as administrator

tomez206 said:
all drivers are installed, the device is recognized, and nothing, when i do run it as administrater i get a whole different error msg
---------- Post added at 08:43 AM ---------- Previous post was at 08:38 AM ----------
windows cannot find '.\assets\windows\bin\mintty.exe'. Make sure you type the name correctly and try again...thats the error i get when trying to run as administrator
Click to expand...
Click to collapse
It seems your windows os is missing the default mintty.exe terminal...
Google it and you will find a solution to manually install it.
Or use other pc
Sent from my LG-D851 using XDA Free mobile app

tomez206 said:
hi sorry for the newbiness but for some reason i donload everything i need, basically preperation is done to the T, but as soon as i click on purpledrake_windows.bat it goes into dos window and complety exits out in less then a second, so fast that i can barely read whats on that lil black screen, im pretty sure i can make out "command not found" at the end of it..any help would be greatly appreciated
Click to expand...
Click to collapse
If I recall if the PD batch file/script is closing on you or giving you trouble, then you can run the script manually.
See link below to thecubed PD lite thread and read the 5th grey portion down of the OP, it is titled:
"But, what if I don't want to run your script to root?"
If you must use command line because the PD batch file/script is closing immediately just be sure to STOP after gaining temporary root!
From OP step 7:
IMPORTANT : READ AND DO NOT CONTINUE TO PERMANENT ROOT INSTRUCTIONS DISPLAYED. FOLLOW INSTRUCTIONS TO CONTINUE WITH ADB INSTEAD. [/FONT]

lagvoid said:
dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
This command doesn't work for me. It shows, "cannot open for read: no such file or directory".
Can you help?
Edit: Nevermind, had to repush recovery. Didn't go through properly the first time. Thank you
Everything worked great. Thank you for the guide! Rooted on 10r!
Click to expand...
Click to collapse
Hello,
I am also having the same issue. I tried the above steps a couple times and am not sure if I am doing something wrong (more than likely I am). What did you mean by repush recovery?

Try step 9 again
9- Type "adb push recovery.img /temp"
You will see that it pushes the data. it should take a few seconds

vcurbel said:
Ok....lets do it one at a time
Once you open and run ADB LOCAL READY. When you type adb devices, is it show your device?
Let me know on which step you got stuck.
Ill try to help you
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------
C:\Users\nick\Downloads\ADB LOCAL READY>c:\windows\system32\cmd.exe
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\nick\Downloads\ADB LOCAL READY>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
LGD851xxxxxxxx recovery
C:\Users\nick\Downloads\ADB LOCAL READY>adb push recovery.img /temp
9682 KB/s (11245568 bytes in 1.134s)
C:\Users\nick\Downloads\ADB LOCAL READY>adb shell
[email protected]:/ $ /temp/fakesu
/temp/fakesu
# Is /temp
Is /temp
/temp/fakesu: Is: not found
# dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
/temp/recovery.img: cannot open for read: No such file or directory
#
--------------------------------------------------------------------------------
Yes, The phone is recognized and the file as you see was pushed (see script above). I think there is some issue with this method, as other people are reporting problems following the procedure in post #1??!! I guess it work for some and it does not for others.

[Q&A] How to Root KVT49L.D85110r and Install TWRP. My experience

Q&A for How to Root KVT49L.D85110r and Install TWRP. My experience
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for How to Root KVT49L.D85110r and Install TWRP. My experience. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

This worked fantastic for me!
Perfect guide to fix the root problem on the 10r! Great work on the guide!

thanks
really didn't want to downgrade to previous version. this worked great. awesome detailed instructions. thank you so much for this thread.

With this do you lose all your data?

not working
ALL IS FINE UNTIL I GET TO THIS STEP IN THE LINK:
- Type "ls /temp" to make sure that recovery.img and fakesu are in /temp folder . If it is not, then you did not complete correctly the above instructions..repeat it
AT THIS POINT I AM GETTING "NOT FOUND". DID THE STEPS ABOVE SEVERAL TIMES.
================================================== ========================================
C:\Users\nick\Downloads\ADB LOCAL READY>c:\windows\system32\cmd.exe
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\nick\Downloads\ADB LOCAL READY>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
LGD851xxxxxxxx recovery
C:\Users\nick\Downloads\ADB LOCAL READY>adb push recovery.img /temp
9716 KB/s (11245568 bytes in 1.130s)
C:\Users\nick\Downloads\ADB LOCAL READY>adb shell
[email protected]:/ $ /temp/fakesu
/temp/fakesu
# Is /temp
Is /temp
/temp/fakesu: Is: not found
#
================================================== =======================================

christian2399 said:
With this do you lose all your data?
Click to expand...
Click to collapse
no, you will not
---------- Post added at 07:37 PM ---------- Previous post was at 07:31 PM ----------
sharkoparko said:
ALL IS FINE UNTIL I GET TO THIS STEP IN THE LINK:
- Type "ls /temp" to make sure that recovery.img and fakesu are in /temp folder . If it is not, then you did not complete correctly the above instructions..repeat it
Click to expand...
Click to collapse
I responded in the main thread
ls /temp on su command # , it is just to confirm that recovery.img image and fakesu files were pushed to the temp folder
. You should check that both are there and continue to step 13

can you tell me what you mean by push through recovery im a nube and i dont know how to do that causethat same command isnt working for me

The TWRP recovery is pushed into your device /temp folder on step 9 and it is installed in your device with the comands in step 13.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

hey Im having that same problem
dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery that command isnt working and i wanted to know if anyone can help me get around this??

Not working for me - see output
PurpleDrake doesn't appear to be able to get temp root. Any ideas on where to go from here?
Launching PurpleDrake for OSX
Welcome to PurpleDrake!
Please ensure your phone is connected, powered on, and USB debugging is properly enabled.
Your phone should be showing your homescreen with no other apps open. This is to ensure a clean state.
When you're ready, press [enter]...
Press [enter] to continue...
Waiting for device... ....
.... Found device!
Your phone is a [ LG-D851 ] on [ TMO ] running SW version [ V10r ] ...
Alright. We're ready to go. We're going to temproot your phone first. Press enter when you're ready!
Press [enter] to continue...
Rebooting phone...
Waiting for device... .. Found device!
Found device, checking if vulnerable...
Yep, performing temproot...
Waiting for system to settle...
ERROR: Something went wrong. FakeSU didn't work, rebooting phone.
Debug information - 'ls -l /temp/fakesu':
/temp/fakesu: No such file or directory
------------------------
We tried to temproot you, and it didn't work. This phone isn't vulnerable, it would appear.
Please post on XDA with your phone model, carrier, and SW version in the PurpleDrake thread and someone will take a look.
Your phone has been rebooted back to normal system mode, no changes have been made. Thanks for trying!
logout
---------- Post added at 01:09 AM ---------- Previous post was at 12:56 AM ----------
phpthug said:
PurpleDrake doesn't appear to be able to get temp root. Any ideas on where to go from here?
Launching PurpleDrake for OSX
Welcome to PurpleDrake!
Please ensure your phone is connected, powered on, and USB debugging is properly enabled.
Your phone should be showing your homescreen with no other apps open. This is to ensure a clean state.
When you're ready, press [enter]...
Press [enter] to continue...
Waiting for device... ....
.... Found device!
Your phone is a [ LG-D851 ] on [ TMO ] running SW version [ V10r ] ...
Alright. We're ready to go. We're going to temproot your phone first. Press enter when you're ready!
Press [enter] to continue...
Rebooting phone...
Waiting for device... .. Found device!
Found device, checking if vulnerable...
Yep, performing temproot...
Waiting for system to settle...
ERROR: Something went wrong. FakeSU didn't work, rebooting phone.
Debug information - 'ls -l /temp/fakesu':
/temp/fakesu: No such file or directory
------------------------
We tried to temproot you, and it didn't work. This phone isn't vulnerable, it would appear.
Please post on XDA with your phone model, carrier, and SW version in the PurpleDrake thread and someone will take a look.
Your phone has been rebooted back to normal system mode, no changes have been made. Thanks for trying!
logout
Click to expand...
Click to collapse
So, I apparently already had TWRP installed as the recovery somehow of this device, so I just had to flash the SU zip from it and all is good. Thanks!

christian2399 said:
hey Im having that same problem
dd if=/temp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery that command isnt working and i wanted to know if anyone can help me get around this??
Click to expand...
Click to collapse
1- make sure that device is recognized , if not unplug it and plug it back on
2- make sure that you apply this dd command when you are on # su command
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

vcurbel said:
1- make sure that device is recognized , if not unplug it and plug it back on
2- make sure that you apply this dd command when you are on # su command
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
I did do all that correctly but still for some reason it says file cannot be found everything works until that step please help me i want my root back!

christian2399 said:
I did do all that correctly but still for some reason it says file cannot be found everything works until that step please help me i want my root back!
Click to expand...
Click to collapse
Did you do the ls/temp on su # command? It will give you all files on the /temp folder. If you do not see the twrp recovery.img there.. it means that the recovery.img was not pushed into the /temp folder on step 8.
Another question? What do you mean about that you want you root back? Do you have root before? Do you a custom recovery before?IS IT TWRP? If so ...it is easy...just move the updatesupersu2.40.zip file to you sdcard and install it in your custom recovery
Sent from my LG-D851 using XDA Free mobile app

vcurbel said:
Did you do the ls/temp on su # command? It will give you all files on the /temp folder. If you do not see the twrp recovery.img there.. it means that the recovery.img was not pushed into the /temp folder on step 8.
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
look this iswhat im getting

christian2399 said:
look this iswhat im getting
Click to expand...
Click to collapse
Yea...as you can see recovery file is not in you temp folder.....you need to go back to step 8 and push it
Sent from my LG-D851 using XDA Free mobile app

Worked for me!!
Glad I stumbled on this thread. It worked for me. I did have to move the recovery.img twice (it didn't move the first time). But I was able to check that it was not there with the ls. Thanks for this tutorial! Appreciated.

You all did it the hard and complicated way. You should have just followed the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=2961261
It how I updated both my phone and my wife's phone when the update came out last month and it took less than a minute

Thanks
I'm glad I found a way for this to work

truckerdewd said:
You all did it the hard and complicated way. You should have just followed the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=2961261
It how I updated both my phone and my wife's phone when the update came out last month and it took less than a minute
Click to expand...
Click to collapse
This thread is not about to install the R update. It is to root it and to install twrp custom recovery
Sent from my LG-D851 using XDA Free mobile app

vcurbel said:
This thread is not about to install the R update. It is to root it and to install twrp custom recovery
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Wrong. If you read, it has everything needed to update to to the R update and root it. This is the exact sane thread I used to update both my phone and my wife's phone.

Note 4 bootloop after *#9090# menu

First of all dont go to that menu. U will brick. Does anyone have a solution? Google is NOT helping!!!

thenobileone said:
First of all dont go to that menu. U will brick. Does anyone have a solution? Google is NOT helping!!!
Click to expand...
Click to collapse
Use ODiN find on XDA recommend version 3.10 and download a stock firmware based on your phone and flash it. Find a guide or so.

I am too stuck in the same boat. Did you find a fix for it?
I downloaded stock firmware and flashed it but still freezes then restarts.

im having the same problem... and the phone is restarting .. i cant access the menu againg... help please

This is a real bugger of a problem and simply reflashing firmware alone will not fix it. If your phone is still under warranty, I'd advise sending it back to Samsung for replacement. The following instructions were pulled off the GSM with credit to user Bsisco. You will need to know how to issue ADB commands and when it's all said and done, you may stop the bootlooping, but you will likely lose your original IMEI and have to write a new certificate which requires a Z3X box or other unlock repair box. KingRoot supplies a temporary root and requires repeating the steps after reboot. Proceed with caution and no guarantees included. Here is his solution:
1. Downgrade to 4.4.4 via Odin. Extract OC4, extract Odin, open Odin, select four files into correct position (BL, AP, CP, CSC) 4.4.4 OC4 Odin 3.09 (Samsung Mobile drivers required)
2. Once on 4.4.4 or below, enable developer options by tapping "build version" several times, enable USB debugging & mock location, and install KingRoot 4.0.0.233 to phone. Caution, newer versions did not work for me.
3. Open "Command Prompt" and type "adb version" should reply with "Android Debug Bridge version x.x.x", if does not, change to the correct directory where adb is installed via "cd" command.
4. These next two steps can be a little tricky as the phone often reboots before completed, must work quickly, I suggest copying the long command, then paste when ready.
5. Connect to working WiFi. Turn off your phone, reboot, or wait for it to reboot itself. Soon as phone turns on, open KingRoot, soon as WiFi connected notification appears, touch button in center of KingRoot app, soon as KingRoot reaches 30%, began adb commands.
6. ADB commands: first command "adb shell", second command "su", third command "dd if=/dev/zero of=/dev/block/mmcblk0p10 | dd if=/dev/zero of=/dev/block/mmcblk0p13 | dd if=/dev/zero of=/dev/block/mmcblk0p14 | dd if=/dev/zero of=/dev/block/mmcblk0p15 | dd if=/dev/zero of=/dev/block/mmcblk0p16" phone will reboot or you can reboot and after reboot boot-loop and unknown baseband will be fixed! Can now write new IMEI via "Write Cert" and possibly "Write QCN" if any network troubles, then all good to go!

brg7562 said:
This is a real bugger of a problem and simply reflashing firmware alone will not fix it. If your phone is still under warranty, I'd advise sending it back to Samsung for replacement. The following instructions were pulled off the GSM with credit to user Bsisco. You will need to know how to issue ADB commands and when it's all said and done, you may stop the bootlooping, but you will likely lose your original IMEI and have to write a new certificate which requires a Z3X box or other unlock repair box. KingRoot supplies a temporary root and requires repeating the steps after reboot. Proceed with caution and no guarantees included. Here is his solution:
1. Downgrade to 4.4.4 via Odin. Extract OC4, extract Odin, open Odin, select four files into correct position (BL, AP, CP, CSC) 4.4.4 OC4 Odin 3.09 (Samsung Mobile drivers required)
2. Once on 4.4.4 or below, enable developer options by tapping "build version" several times, enable USB debugging & mock location, and install KingRoot 4.0.0.233 to phone. Caution, newer versions did not work for me.
3. Open "Command Prompt" and type "adb version" should reply with "Android Debug Bridge version x.x.x", if does not, change to the correct directory where adb is installed via "cd" command.
4. These next two steps can be a little tricky as the phone often reboots before completed, must work quickly, I suggest copying the long command, then paste when ready.
5. Connect to working WiFi. Turn off your phone, reboot, or wait for it to reboot itself. Soon as phone turns on, open KingRoot, soon as WiFi connected notification appears, touch button in center of KingRoot app, soon as KingRoot reaches 30%, began adb commands.
6. ADB commands: first command "adb shell", second command "su", third command "dd if=/dev/zero of=/dev/block/mmcblk0p10 | dd if=/dev/zero of=/dev/block/mmcblk0p13 | dd if=/dev/zero of=/dev/block/mmcblk0p14 | dd if=/dev/zero of=/dev/block/mmcblk0p15 | dd if=/dev/zero of=/dev/block/mmcblk0p16" phone will reboot or you can reboot and after reboot boot-loop and unknown baseband will be fixed! Can now write new IMEI via "Write Cert" and possibly "Write QCN" if any network troubles, then all good to go!
Click to expand...
Click to collapse
If you try this fix you will ended up stuck in factory mode just like I did. On the original post someone said that we only have to wipe 3 partitions (this method wipes five .10,13,14,15,16). Since I don't have a box to completely repair my phone I'm gonna have to sell it for parts.

And Why this thread in Development???? It make me exited when I saw new thread in Development section ( thought permanent root came) Gzzzz

# adb shell
[email protected]:/ $ su
=/dev/block/mmcblk0p15 | dd if=/dev/zero of=/dev/block/mmcblk0p16 <
/dev/block/mmcblk0p16: write error: No space left on device
9+0 records in
8+0 records out
4096 bytes transferred in 0.006 secs (682666 bytes/sec)
/dev/block/mmcblk0p14: write error: No space left on device
8193+0 records in
8192+0 records out
4194304 bytes transferred in 0.477 secs (8793090 bytes/sec)
/dev/block/mmcblk0p10: write error: No space left on device
8193+0 records in
8192+0 records out
4194304 bytes transferred in 0.531 secs (7898877 bytes/sec)
/dev/block/mmcblk0p15: write error: No space left on device
8193+0 records in
8192+0 records out
4194304 bytes transferred in 0.547 secs (7667831 bytes/sec)
/dev/block/mmcblk0p13: write error: No space left on device
28673+0 records in
28672+0 records out
14680064 bytes transferred in 0.987 secs (14873418 bytes/sec)
Somehow my device truly hates me. I've been trying to get past a modem crash/ kernel panic with no success.