Mine is stock 2.3.6 rooted.
I tried to flash other rom today after installing cwm.
However, I am not familiar with flashing...after flashing and reboot, the sreen only stayed in samsung
also I could not restore in cwm , as it said it failed to do( I pressed backup before in cwm..why it doesnt work)
and How could I install the stock rom again now?
download mode and recovery mode is available
I tried to use odin to install recovery again and the stock rom again.(installation is successful)
however, it just keeps rebooting(now showing the samsung-->GTS5660-->animation-->animation again-->animation again)
finally it is working now, as I tried to flash many times
However, I dare not to flash rom anymore..and I do not know really how to flash rom
go to recovery and do factory reset and then reboot
Hello XDA,
it appears as though I have somehow managed to brick my S4 when using odin to return the phone to stock (MDL the device was never updated to 4.3 or 4.4.2)
Here is what I tried;
1. put the phone into download mode an flashed firmware (UVUAMDL, as mentioned above, I never updated)
2. put the phone into stock recovery to perform a data wipe
3. rebooted and the phone; once the t-mobile screen appeared, the phone went black.
Whenever I attempt to boot the device, I am presented with the main S4 splash screen for about 2 seconds, and then the phone turns itself off.
I can only enter download mode
I also cannot enter recovery mode
please help, thanks
Nightfrost95 said:
Hello XDA,
it appears as though I have somehow managed to brick my S4 when using odin to return the phone to stock (MDL the device was never updated to 4.3 or 4.4.2)
Here is what I tried;
1. put the phone into download mode an flashed firmware (UVUAMDL, as mentioned above, I never updated)
2. put the phone into stock recovery to perform a data wipe
3. rebooted and the phone; once the t-mobile screen appeared, the phone went black.
Whenever I attempt to boot the device, I am presented with the main S4 splash screen for about 2 seconds, and then the phone turns itself off.
I can only enter download mode
I also cannot enter recovery mode
please help, thanks
Click to expand...
Click to collapse
First, if you have updated your baseband/modem to MK2, NB4, or NH7, you need to find the MDL baseband/modem files and manually revert your modem. Once you've done that, you can then attempt to revert by simply flashing the MDL firmware in Odin again. If that still doesn't allow you to do anything but get into download mode, try the next suggestion.
Download an Odin-flashable custom recovery and a non-TouchWiz ROM... Cyanogenmod 11, SlimKat/Bean, etc... any Odin-flashable custom recovery will work for this purpose as well as any CM/AOSP-based ROM. No need to download GApps unless you plan to use whatever ROM you download some point in the future.
Using Odin, flash the recovery you picked.
Using the recovery you just flashed, flash the ROM you downloaded.
Boot into the ROM <Optional>
(Re)Boot into download mode
Use Odin to flash UVUAMDL.
At that point, since you're still on the MDL bootloader, you can then use TriangleAway to reset your flash counter or whatever else you want to do.
I've found that when using Odin to revert to stock while already running a TouchWiz ROM (custom or stock, doesn't matter) data and settings will, for some reason, survive the flash and cause problems. If you begin the process while already on a CM/AOSP ROM, going back to stock tends to go much smoother and there's no need for a factory reset after that.
Got it! Thank you
+Thanks button
Hello,
Im having a problem using ODIN to return to stock. It is going through the entire step of flashing the stock image and it reboots successfully but it doesn't work and my old ROM is still there. Any idea why?
After successfully flashed .tar via odin, restart to recovery and do a full wipe/factory reset.
It will return you back to full stock
I am am trying to take my Samsung i317 AT&T Note 2 back to stock.
Installed 4.4.2 NJ1 stock rom using ODIN. Reset/ cleared and started phone and went to OTA upgrade the latest patch from AT&T to make it to NJ2. However, when the phone reboots, the Samsung Note II logo shows up and the screen does dark. When I try to enter recovery, it starts to reinstall the OTA patch all over again and says updated. Tried turning the phone back on and the same thing happens again.
I was able to get the phone to work by reflashing the NJ1 stock rom and installed the ZIP stock recovery file using CWM. However, I am trying to get back to the original stock configuration as possible without having CWM installed on the phone and was hoping I can install the stock recovery so that when I go to download mode, everything shows Samsung Official. Knox Warranty Void is at 1, so I guess there is nothing I can do to fix that at this point.
Would installing this be the simple fix by downloading 4.3 Param.bin and Tz.img
Another would be to install the stock recovery ZIP file using CWM as I have already successfully done and maybe someone can point me to find a way to uninstall the CWM afterwards. I've searched online to remove CWM but couldn't find the md5.tar file that would do that from ODIN.
Tmobile Galaxy S4 (SGH-M919) Non-rooted
Problem:
The phone was working and then suddenly went into boot loop. The Samsung screen displays and right before it would goto the animation screen, it loops. I can get to download mode and the recovery OS.
What I've tried:
- First thought it was power button, sent it away to replace button but tech says it's not power button. The phone doesn't turn itself on when the battery is inserted. I can use the power button to turn on/off the phone fine.
- Cache wipe
- Factory reset
- Kies update/recovery
- Burn different firmware version (NB4, NH7, NK2, OH3)
- Tried just to burn NB4 twice consecutively without reboot (first time OK. when burn second time w/o reboot, the phone would display error saying the percentage completed is incorrect since it just finished 100%. Odin continues to burn to finish fine.)
Nothing seems to work. It still loops.
I am desperate. Please help! Thanks in advance.
Beocop
An update:
I tried CF Root and was able to get past he first Samsung screen, past the white TMobile screen, but it went back to boot loop again. Don't know what else to do. Any suggestions?
By burn do you mean you odin'd official stock rom? You cannot downgrade after 4.2.2 MDL so if you flashed OH3 then NB4 will not work anymore...just flash oh3 and root it. For root you can either flash recovery through odin then fash supersuBETA via recovery. Or (if you dont have a computer near you) use kingroot then push recovery through terminal emulator, then run remove kingroot app (google it) then flash supersu through recovery. Link to supersubeta: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
lordodin912 said:
By burn do you mean you odin'd official stock rom? You cannot downgrade after 4.2.2 MDL so if you flashed OH3 then NB4 will not work anymore...just flash oh3 and root it. For root you can either flash recovery through odin then fash supersuBETA via recovery. Or (if you dont have a computer near you) use kingroot then push recovery through terminal emulator, then run remove kingroot app (google it) then flash supersu through recovery. Link to supersubeta: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Click to expand...
Click to collapse
I've tried flashing OH3 (twice) also. It still boot loops. Then I tried CF Root to see if it does anything. It flashes fine with no problem. It still boot loops.
I can get into download mode and recovery without problem. It just won't let me past the boot loop.
Try different versions of odin/usb cables and reflash. Or and this voids WARRANTY. Put TRWP on your phone and try a different kernel or OS.
lordodin912 said:
Try different versions of odin/usb cables and reflash. Or and this voids WARRANTY. Put TRWP on your phone and try a different kernel or OS.
Click to expand...
Click to collapse
update:
- I've tried different odin versions (3.07,3.09,3.10). I've tried different USB cables. There was no indication on any error during the flashing process.
- I can flash any stock ROM after NB4 (anything before NB4 => Odin fail). After flashing stock ROMS, it can never get past the Galaxy S4 screen. It just boot loop.
**** I tried to download the OH3 stock rom from Sammobile but I always get a corrupt file error in Winrar. Can someone verify if the OH3 ROM on Sammobile is error free?
- I've tried TWRP (2.6.0.0, 2.6.3.1, 2.8.4.0). I've used it to flash CM-12.1 and Darthstalker_S4_V3 ROMs.
- After flashing all the custom CM ROM, it got stuck with the pink screen.
- I get nothing from Darthstalker ROM, just blank.
I am so frustrated with this process. It seems that I am doing something wrong in my process to flash the ROMs. I am missing something.
Can you please list ALL the steps necessary to properly flash a ROM? Please list every single step that you would personally take, no matter how insignificant (remove battery, clear cache, settings, etc.). Just treat me like a 1st grader.
Thanks so much.
Another update...
- So far, I've tried to flash stock ROMS (NB4-OH3) with odin. None of the stock ROMs will boot fully. All stuck at Samsung logo and bootloops from there.
- The best, but not fully functional, solution I've found so far is from:
1- Flash stock rom NH7 (tried NB4,NH7 so far) with odin
2- Flash CF auto root (CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5) with odin
3- Flash CWM for recovery
4- boot into recovery, from CWM, install cm-11-20140110-SNAPSHOT-InstallerXNPQ02R-jfltetmo-signed.zip from sdcard1
5- From CWM, install gapps kk for 4.4.3 from sdcard1
6- Clear dalvik, format data + cache
It'll boot up fine. However, I get no sound (not from speaker or headphone). Google keyboard keeping turn on and off. The camera doesn't work. Video's cannot be played.
info "about phone":
Model: SGH-M919
Android version: 4.4.2
Baseband version: M9191UVUFNH7 (prob from CF auto root ?)
Kernel version: 3.4.0 cyanogenmod
Cyanogenmod version: 11.0-installer-XNPQ02R
Build date: 1/9/14
Build number: cm_jftetmo-userdebug4.4.2 KOT49H-installerXNPQ02R release-keys
Don't know what to do now. I've no idea why it won't take stock ROMs. I don't know why I am having problems in cyanogenmod. I freakin hate working on these phones.
Any ideas? suggestions? PLEASE!
Flash philz cwm touch recovery with your current recovery. Then use philz recovery to flash this rom: http://forum.xda-developers.com/galaxy-s4-tmobile/development/moving-please-post-t3009561.
Vicious89 said:
Flash philz cwm touch recovery with your current recovery. Then use philz recovery to flash this rom: http://forum.xda-developers.com/galaxy-s4-tmobile/development/moving-please-post-t3009561.
Click to expand...
Click to collapse
Update:
-OK. I tried using philz cwm and burned this ROM but went through the installation process and picking choices. However, it wouldn't even boot.
-I decided to open up the phone to verify I had a SGH-M919. The sticker underneath the battery indicated SGH-M919. The phone has been using and updating OTA with T-Mobile firmware, the latest being OH3 with stagefright fix.
-After I removed the motherboard, what I saw underneath was disturbing. There was one big stamping showing "I337", which is AT&T. Many other stampings on the chips also show I337.
-In download mode, the product name indicated "SGH-M919".
So the question is, do I have a I337 or M919 phone? Currently, I cannot flash or install any firmware that is not for M919. I tried flashing ATT stock rom (I337ATTFNB1) with odin but it failed, indicating many errors such as PIT. I tried installing CM 11 for ATT but it also failed indicating that I need jfltetmo (M919) version. Ever since the bootloop problem, I cannot get the phone to boot with stock M919 roms.