Related
Donning a new name in favour of the new delicious version of Android... Welcome to the ThunderKat Project!!
Heavily based of my Flaming Monkey kernel configurations and the stock AOSP kernel source, here's my standalone kernel for the Nexus 10. I will maintain this independently.
It will always remain close to the AOSP exynos kernel for manta (Nexus 10) with a few useful tweaks and additions, but will not have any OC/UV, colour controls and any advanced customisation options. It is a stable kernel and will not have frequent updates.
This kernel uses the AnyKernel method and is ROM independent. I have tested this on 4.4 (Stock & AOSP) based ROMs.
Features:
1. Linux Kernel 3.4.39.
2. Based on AOSP KitKat MR1 kernel source for exynos/manta.
3. Built using the Google ARM GCC 4.8 toolchain with -O3 CFLAGS & AFLAGS optimisations & ARM Cortex A15 build optimisations.
4. Enabled Conservative & Powersave CPU frequency governors (in addition to Interactive, Performance & Userspace). Interactive set as default.
5. Preserve correct sysfs permissions on governor change.
6. KSM (Kernel Samepage Merging) support.
7. NTFS, F2FS, EXT4 xattr (extended attributes) support.
8. Networked file systems support (NFS V3, NFS V4 & CIFS).
9. HIDRAW support (supports non-conformant HID devices).
10. Support for more input devices (keyboards, mice & joysticks) including Logitech Unifying devices.
11. Support for USB serial modems (PPPOE).
12. Support for multi-card readers (multi-lun devices). This allows you to mount multiple cards using a multi-card reader. May need an app like StickMount. (Credit @nvertigo67)
13. Removed SWAP support.
14. Removed some un-needed debugging.
15. Increased thermal throttle limits
16. Scalable CPU frequencies
Changelog [2014/08/24]:
1. Built using Graphite optimized GCC4.8 toolchain
2. Added ROW & SIO I/O schedulers
3. Set ROW as default I/O scheduler
4. Upstream F2FS changes
5. Miscellaneous I/O improvements
Changelog [2014/06/05]:
1. Update to AOSP 4.4.3 kernel source (kitkat-mr2)
2. Added F2FS filesystem support
Changelog [2013/12/15]:
1. Update to AOSP 4.4.1/4.4.2 kernel source (kitkat-mr1)
Changelog [2013/11/21]:
1. Initial release
Information:
1. Flash using a custom recovery (TWRP/CWM).
2. This kernel is ROM independent and uses the AnyKernel method. Hence it uses the current ramdisk. You may have issues if this is flashed after a kernel with a custom ramdisk. If so, reflash your ROM and then flash this kernel.
3. Needs an unlocked bootloader.
4. Make sure you have at least 50% battery charge before flashing this.
Download:
ThunderKatKernel-4.4.4-20140824 (AndroidFileHost)
ThunderKatKernel-4.4.4-20140824 (Goo.im)
Archive (4.4.x) - (AndroidFileHost)
Archive (4.4.x) - (Goo.im)
Archive (4.3.x) - Unsupported
Archive (4.2.x) - Unsupported
Source:
GitHub
Disclaimer:
While I have extensively tested this and even though it is heavily based on the AOSP kernel, you may encounter issues. I will try to help you, but I will not take any responsibility if anything goes wrong. Please exercise caution.
Credits:
Google, Samsung, CM, AOKP, PA, ktoonsez, morfic, franciscofranco, Goo.im, AndroidFileHost
Reserved. Just in case
craigacgomez said:
Reserved. Just in case
Click to expand...
Click to collapse
Very cool! I will be trying this tomorrow, will have time to play with it. Nice to see KSM in it.
Nicely done. I'm running your kernel as we speak--snappy, snappy! No issues so far. :good:
Only thing left to do now is give it a catchy name like: "The CRAIGINATOR"
Wow, great news, thanks craig!
brGabriel said:
Nicely done. I'm running your kernel as we speak--snappy, snappy! No issues so far. :good:
Only thing left to do now is give it a catchy name like: "The CRAIGINATOR"
Click to expand...
Click to collapse
Thanks...and yes, I will be renaming my ROM and kernel to something more... well, appealing... when I restart the ROM project...
Once I'm at 50% I'll be all over this like a rash
Sent from my Nexus 10 using xda premium
Great job, runs great! Only issue is it defaults to cfq scheduler on boot even when I have it set to run deadline.
More of a preference than an issue.
This kernel is really good, I was very impressed by your previous Rom and look forward to the new Rom you said will be released later in the year (hopefully!). Your hard work is much appreciated. Using your kernel with Carbon Rom right now and it seems very stable.
Sent from my Nexus 10 using XDA Premium HD app
Yep, snappy, snappy!
Sent from my Nexus 10 using Tapatalk HD
this kernel works best on my N10. no reboot, no SOD and no battery drain.
my tablet is 10 days up without a single problem or recharge! :good:
i hope it will be continued in the future!
Yes, I will continue supporting this kernel... though there will not be many updates... the aim to to remain close to AOSP, yet provide some useful tweaks and additions... I will be building a newer version soon (having problems with the cross compiler on my work laptop, else I would have done it today)...
Hi!
Can I flash this kernel to the stock ROM?
And revert back when new android version comes out to OTA update?
Thank you
teodor_ch said:
Hi!
Can I flash this kernel to the stock ROM?
And revert back when new android version comes out to OTA update?
Thank you
Click to expand...
Click to collapse
Yes, this will work fine on stock...and you can easily revert back using the boot.img from the factory images provided by Google...
Updated release in OP...
Does this have the latest wifi and or gpu drivers? I know wifi drivers are kernel level, not sure about the gpu though. Anyways, its a very nice and smooth kernel. It's been a baron wasteland in mantaland. I guess Google didn't sell many of these.
I just installed the kernel, very smooth, I was having shutdowns on Trinity latest and RootBox. Hopefully is not a ROM problem and this kernel fixes it, I really like RootBox.
Thanks for the awesome work and support.
Erik
situman said:
Does this have the latest wifi and or gpu drivers? I know wifi drivers are kernel level, not sure about the gpu though. Anyways, its a very nice and smooth kernel. It's been a baron wasteland in mantaland. I guess Google didn't sell many of these.
Click to expand...
Click to collapse
I have yet to incorporate the updated wifi and gpu kernel level drivers... I will be working on these soon...
Anyone here with sufficient kernel knowledge to merge the updated mali graphics drivers (http://malideveloper.arm.com/develo...n-source-mali-t6xx-gpu-kernel-device-drivers/)... There are a few updates that are beyond my kernel & C/C++ capabilities... like osk has been replaced by kbase... Please PM me if you can help!! Thanks!
Great work on this kernel! First time reaching 9 hours on screen time. Paired with Mr Robinson AOKP.
STOCK KERNEL FOR GT-I9505
WORKS ONLY WITH 4.3 (v1.3) and 4.4.2 (v3+) TW!!
Code:
*** Disclaimer
This is a stock kernel. Please be aware that it is for i9505 only.
I can not guarantee that it will work for other devices.
Use it at you own risk. If anything goes wrong I take no responsibility.
Introduction
This kernel is build from stock samsung MJ5 update 4 sources (v1.3) and from NB8 update 5 sources for v2 ! I wanted to keep it as stock as possible for people like me that are satisfied with the stock kernel, do not want OC, UV, and have the old bootloader.
Till now all of us with the old bootloader could not use the stock kernel but only custom.
The kernel can be used also with the new bootloader, but I guess you already have a stock kernel
This Kernel solves ALL the problems. Also slow motion on camera works. I expect NO REBOOTS. (I had none!)
Click to expand...
Click to collapse
Description
This is the stock samsung kernel source, but changed the SELinux policy from enforcing to permissive. In the settings app, it still shows as "Permissive". Removed the restrictions from kernel source regarding rooting etc.
Click to expand...
Click to collapse
Features
Build from NG2 4.4.2 TW Samsung sources Update 8
Build from NB8 4.4.2 TW Samsung sources Update 5 (Version 2)
Build from MJ5 4.3 TW Samsung sources Update 4 (Version 1.3)
Build with stock ARM toolchain 4.6
Can be rooted
Exfat sdcard build-in support.
SELinux status to permissive.
Reboot FREE!!
Click to expand...
Click to collapse
Bugs
Old bootloader
[*]Can not charge phone when it is off..
[*]Can not set lockscreen and vpn *** Fixed you have to change build.prop entry security.mdpp=None to #security.mdpp=None
[*]Wifi does not work *** Fixed you have to change ro.securestorage.support=true to ro.securestorage.support=false
-MTP does not work with 4.4.4 T-mobile ROMs
Click to expand...
Click to collapse
Changelog
Version 1.1 First Version
Version 1.2 Added init.d support
Version 1.3 Added FauxSound v2.1 support.
Version 2.0 New kernel for 4.4.2 TW rom
Version 2.4.2 Bug fixes ..Fixed install script.
Version 2.5 Fixed charging when phone is turned off Thanks to @Fenny
Version 2.51 Updated ramdisk to NE5. No significant changes...
Version 3 Updated Sources NG2 (Update 8) and ramdisk to NG8. No other significant changes...
Version 3.1 Updated Sources NG8 (Update 9) and ramdisk to NG8.No other significant changes...
Version 3.2 Updated Sources NG8 (Update 9) and ramdisk to NG8.No other significant changes...Fixed fauxsound bug
Version 3.3 Fixed fauxsound bugs...
Version 3.4 Update Fauxsound to 3.5
Click to expand...
Click to collapse
Downloads
Download
Flash it with CWM!
For 4.4.2 TW ROM
- Kernel v3.4 (kernel shows as v3+) Update fauxsound to 3.5, charge when device is OFF, Update9 with NG8 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v3.3 (kernel shows as v3+) FIXED fauxsound, charge when device is OFF, Update9 with NG8 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v3.2 (kernel shows as v3+) FIXED fauxsound, charge when device is OFF, Update9 with NG8 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v3 (kernel shows as v3) FIXED charge when device is OFF, Update 8 with NG8 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v2.51 (kernel shows as v2.+-gb4fe160-dirty) FIXED charge when device is OFF, with NF1 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v2.51 (kernel shows as v2.+-gb4fe160-dirty) FIXED charge when device is OFF, with NE5 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v2.5 (kernel shows as v2.+-gb4fe160-dirty) FIXED charge when device is OFF, with NB8/9 ramdisk * with init.d support - Permissive - auto fix build.prop for OLD Bootloaders credits to hanspampel
- Kernel v2.4.2 Old version
For 4.3 TW ROM
- Kernel v1.3 with ML6 ramdisk * with init.d support -
Donate
Keep me motivated Click HERE
Click to expand...
Click to collapse
Sources
GitHub for v4.4.2
GitHub for v4.4.2
GitHub for v4.3
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Samsung
* Google
* ktoonsez
* ausdim
* wanam
* akshizzle
* Fenny
* dorimanx
* faux123
XDA:DevDB Information
[KERNEL][v3.4][4.3/4.4.2][TW] talexop - SELinux Permissive - Exfat, FauxSnd support!, Kernel for the Samsung Galaxy S 4
Contributors
talexop
Kernel Special Features: SElinux permissive - Exfat, init.d support
Version Information
Status: Stable
Current Stable Version: v3.4
Stable Release Date: 2014-10-24
Created 2013-10-29
Last Updated 2014-10-25
Click to expand...
Click to collapse
Reserved
Reserved
Thank You!
I have been waiting for this,thanks
This is great a new kernel is always welcome!
Hi talexop, congratulations and I wish you much success in kernels development
Sent from my GT-I9505
Omega v13.2 Kernel
I just wanted to ask if this is the same Kernel/version that is comming with Indie's Omega V13.2 Rom...
Regards
ch061441 said:
I just wanted to ask if this is the same Kernel/version that is comming with Indie's Omega V13.2 Rom...
Regards
Click to expand...
Click to collapse
Yes it is the same yo do not need it if you have omega v13.2
ch061441 said:
I just wanted to ask if this is the same Kernel/version that is comming with Indie's Omega V13.2 Rom...
Regards
Click to expand...
Click to collapse
Hello
Yes this is the same kernel.
Congratulations mate for the new and shiny thread
-MVKA
Sent From My Pink & Xparent GT-I9505
MVKA said:
Hello
Yes this is the same kernel.
Congratulations mate for the new and shiny thread
-MVKA
Sent From My Pink & Xparent GT-I9505
Click to expand...
Click to collapse
Because it is a little confiusing, OMEGA V13.2 shows Kernel-Version 3.4.0 and you have 1.1 on this tread, but now I know it is the same....
Thx.
ch061441 said:
Because it is a little confiusing, OMEGA V13.2 shows Kernel-Version 3.4.0 and you have 1.1 on this tread, but now I know it is the same....
Thx.
Click to expand...
Click to collapse
3.4.0 is from stock samsung sources kernel version... I will start changing version numbers after next update ...
So yes 3.4.0 is correct.
This thread is the same as this. And does not belong in original forum.
http://forum.xda-developers.com/showthread.php?t=2487089
---------- Post added at 10:57 AM ---------- Previous post was at 10:52 AM ----------
Second xda rules say you must post your sources github.
boterkaaseneieren said:
This thread is the same as this. And does not belong in original forum.
http://forum.xda-developers.com/showthread.php?t=2487089
---------- Post added at 10:57 AM ---------- Previous post was at 10:52 AM ----------
Second xda rules say you must post your sources github.
Click to expand...
Click to collapse
No it not the same.... I have kernel sources compiled and this one works with old bootloader too!!
This kernel can load unsecured modules and if you read OP it includes also exFat support.!!!
Please be more carefully when you point out something.
Regarding the sources... I guess you are correct.. I have not done it before. I will try and post the sources as well
boterkaaseneieren said:
This thread is the same as this. And does not belong in original forum.
http://forum.xda-developers.com/showthread.php?t=2487089
---------- Post added at 10:57 AM ---------- Previous post was at 10:52 AM ----------
Second xda rules say you must post your sources github.
Click to expand...
Click to collapse
Tataaaa...I've been patiently waiting for the "xda thread police" - et voilà, and here it is...
°°° tapatalked °°°
@talexop
Could you please include in your flashable zip (together with the 2 modules you have already) the original lib/modules ?
I ask for this because every custom kernel comes with its own set of modules, erasing pre-existing ones. And if I want to flah your stock kernel above the one I have now, I'll be stuck.
Thanks,
Sent from my GT-I9505 using Tapatalk 4
Tassos_i said:
@talexop
Could you please include in your flashable zip (together with the 2 modules you have already) the original lib/modules ?
I ask for this because every custom kernel comes with its own set of modules, erasing pre-existing ones. And if I want to flah your stock kernel above the one I have now, I'll be stuck.
Thanks,
Sent from my GT-I9505 using Tapatalk 4
Click to expand...
Click to collapse
The modules are already included in the download link in OP.
talexop said:
The modules are already included in the download link in OP.
Click to expand...
Click to collapse
Thank you very much ! I prefer having the most close possible to stock configuration + root + cwm/twrp + xposed and I do not need any other mods.
I installed your kernel above KT kernel and everything seems to work just fine (among else : wifi, lte, camera, mtp, gps, mhl, dlna, ...). And cpuspy suggests that when screen is off the phone is in "98% deep sleep". I'm on echoe v5+ rom (which is mostly stock).
I have 2 further questions (in the "as much as possible stock" direction) : Does your kernel work with ...
MJ5 wifi modules, or as Friedrich420 points out, all kernels except "Faux" need the GE wifi modules ? If yes, could you build a "back to stock MJ5" wifi flashable zip ?
MJ5 NON-HLOS.bin, or in case of old bootloader do we still need MGA NON-HLOS.bin ?
Thanks again,
Tassos_i said:
Thank you very much ! I prefer having the most close possible to stock configuration + root + cwm/twrp + xposed and I do not need any other mods.
I installed your kernel above KT kernel and everything seems to work just fine (among else : wifi, lte, camera, mtp, gps, mhl, dlna, ...). And cpuspy suggests that when screen is off the phone is in "98% deep sleep". I'm on echoe v5+ rom (which is mostly stock).
I have 2 further questions (in the "as much as possible stock" direction) : Does your kernel work with ...
MJ5 wifi modules, or as Friedrich420 points out, all kernels except "Faux" need the GE wifi modules ? If yes, could you build a "back to stock MJ5" wifi flashable zip ?
MJ5 NON-HLOS.bin, or in case of old bootloader do we still need MGA NON-HLOS.bin ?
Thanks again,
Click to expand...
Click to collapse
Nice to see that it works for everyone!
1.This kernel can work with stock MJ5 wifi files. I do not want to mix this thread with wifi files etc.. because that will mess up the readers. I guess you can use Omega 13.2 which has the stock wifi files or echo v6.
2.I have tried with MJ5 LTE modem but I had no sound. So For the old bootloader I guess we need to have LTE modem MH1 or MGA!
Has this kernel init.d support?
From universe with my gs4 snapdragon powered!
This is a kernel you can flash on any rom for amami, which uses the caf-based libraries and stock rom.
The most work on this was not done by me, this is more a package of work done by other people.
See the next post for installation instructions.
Features
- f2fs support
- cpuquiet cpu hotplug driver(disabled mpdecision automatically)
- lz4 support and lz4 kernel compression
- optional underclocking to 268 Mhz
- fiops i/o scheduler
- lcd color calibration support
- cpu undervolting support
- enabled zram
- faux123's sound control
- fastcharge support
- dynamic sync control by faux123
- '-Ofast'-optimizations
- 'proc/last-kmsg'
- vibration density sysfs interface
- TWRP recovery with f2fs support(stock-based only)
- [WIP] f2fs-compatible ramdisk(stock-rom only, for aosp-based check this
- init.d support(stock romonly, but already included in the most aosp-based roms)
- disabled ric service(stock only, not needed with aosp-based roms)
- prima wifi module
Issues
- exfat sdcards and usb storage can't get mounted
XDA:DevDB Information
MoshKernel-amami[aosp-based + stock], Kernel for the Sony Xperia Z1 Compact
Contributors
CoolDevelopment, faux123, DooMLoRD, FreeXperia, every android kernel developer
Kernel Special Features:
Version Information
Status: Testing
Current Beta Version: 0.3
Beta Release Date: 2014-09-08
Created 2014-07-16
Last Updated 2014-09-08
Reserved
How to configure cpuquiet
You can configure cpuquiet to the pefect use with your phone. You need root permissions and any shell, i. e. Terminal Emulator.
First run 'su' to get root permissions.
Change the minimum and maximum amount of online cpu cores:
Code:
file for max. amount of online cpus: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/max_cpus
file for min. amount of online cpus: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/min_cpus
Example:
echo 3 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/max_cpus
echo 2 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/min_cpus
The cpuquiet driver supports different governors, a bit like cpufreq governors. The governors which are currently present are: "runnable", "rq_stats", "load_stats", "balanced"
Find the best one for you by yourself
Code:
sysfs file: /sys/devices/system/cpu/cpuquiet/current_governor
Example: echo balanced > /sys/devices/system/cpu/cpuquiet/current_governor
Change the max screen-off cpu frequency and online cpus:
Code:
sysfs file for max. screen-off-freq: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_cap
syfs file for max. screen-off online cpus: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_max_cpus
Example:
echo 960000 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_cap
echo 1 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/screen_off_max_cpus
Disable cpuquiet(and enable mpdecision):
Code:
sysfs file: /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/enabled
Example:
echo 0 > /sys/devices/system/cpu/cpuquiet/cpuquiet_driver/enabled
start mpdecision #enable mpdecision
These settings only stick until you reboot. So better setup an init.d script, which applies your settings every boot.
If you aren't sure, what init.d scripts are, ask google.
Reserved
AOSP-based roms
The kernel for asop-based roms gets flashed using a special .zip, which only flashes zImage and dt. That means, there are no ramdisk-problems, which you didn't got before. The scripts inside the script are also modifying the ramdisk to don't have mpdecision enabled by default.
Installation
1. Flash the zip file through a recovery
Download
https://s.basketbuild.com/devs/CoolDevelopment/MoshKernel-amami/aosp-based/
Source: https://github.com/CoolDevelopment/MoshKernel-amami/tree/caf
Stock rom/Stock-based roms
Installation
1. Be sure you have an unlocked bootloader
2. Be sure you have installed busybox
3. Flash the zip file through a recovery
Download
https://s.basketbuild.com/devs/CoolDevelopment/MoshKernel-amami/stock-based/
Source: https://github.com/CoolDevelopment/MoshKernel-amami/tree/14.4.A.0.xxx
https://github.com/CoolDevelopment/MoshKernel-amami-stock-based-initramfs
Changelog
0.1
- initial commit
0.1.1
- revert back to row as default i/o scheduler
0.1.2
- update f2fs to current upstream
- replace Cyanogenmod branding with mine
- strip kernel modules, you don't need to download 30mb+ anymore
0.2
- removed intelliplug
- added cpuquiet cpu hotplug driver
- automatically disabled mpdecision(the scripts are modifying the ramdisk)
- fastcharge support
- '-O3'-optimizations
- lz4 support and kernel compression
- remove overclocking
0.3
- stock-rom support
. dynamic fsync control by faux123
- changed default configuration for cpuquiet
- prima wifi module for stock rom
- upstreamed f2fs commits from linux 3.17rc4
Any roms, Also cm11?
Inviato dal mio Xperia Z1 Compact
cicci0 said:
Any roms, Also cm11?
Inviato dal mio Xperia Z1 Compact
Click to expand...
Click to collapse
Yes
Whaa!! for CM based ROMs and Sony based ROMs!! that would be interesting,
also I like the idea of not having a ramdisk inside the zip, I'll probably use it for next releases of Pimped kernel,
And did you strip the kernel modules before putting them inside the zip??
the wlan.ko module is 43.5MB!! the kernel's zip is around 35MB!!!! that is alot.
BTW, great work, thanks for contributing again and again for our beloved device,
hope you the best:angel:
OmarEinea said:
Whaa!! for CM based ROMs and Sony based ROMs!! that would be interesting,
also I like the idea of not having a ramdisk inside the zip, I'll probably use it for next releases of Pimped kernel,
And did you strip the kernel modules before putting them inside the zip??
the wlan.ko module is 43.5MB!! the kernel's zip is around 35MB!!!! that is alot.
BTW, great work, thanks for contributing again and again for our beloved device,
hope you the best:angel:
Click to expand...
Click to collapse
I am sorry but it may not work on sony roms, you can try if you want. I didn't test it.
I did not even know that kernel modules can be stripped
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
CoolDevelopment said:
I am sorry but it may not work on sony roms, you can try if you want. I didn't test it.
I did not even know that kernel modules can be stripped
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well yeah that is the problem, I'm kinda sure that you can't use the same kernel for Sony and AOSP based ROMs in the same time!!
so you should mention in OP or in title that this kernel is for AOSP based ROMs so that users don't get confused...
Also if you haven't searched and found out about the stripping, you can do it by executing this:
<dir-to-toolchain>/bin/arm-eabi-strip --strip-unneeded <dir-to-modules-folder>/*
of course the arm-eabi-strip part depends on what toolchain you're using.
Hopefully that would help.
Works on unofficial slimkat
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
It also works great with this : http://download.mokeedev.com/?device=amami
ps: Always love to use the FauxSound Audio/Sound Control and FauxClock apps
Thank You !!!!
:good:
Version 0.1.2:
- update f2fs to current upstream
- replace Cyanogenmod branding with mine
- strip kernel modules, you don't need to download 30mb+ anymore
If you want to use f2fs, I really suggest you to install this, the fixed bugs are really important. Else it is almost unneccessary
@CoolDevelopment
Very nice job! Finally we get a dedicated custom kernel for Amami
Oh and I saw the commits on CM gerrit. Nice job man :good:
I'll try flashing this on PAC. If what you say is true, that it doesn't modify the ramdisk, then it should boot. Otherwise I'll get stuck in a bootloop because PAC has custom jar files.
Finally some exciting development on Amami, testing now
EDIT: just a tip, you should ask a mod to move this thread to original development, because it really belongs there
EDIT2: it works perfectly
Yes it doesnt work on pa aslo :/
ygecesefa said:
Yes it doesnt work on pa aslo :/
Click to expand...
Click to collapse
Please give me details else i can't help
Sent from my Xperia Z1 Compact using XDA Premium 4 mobile app
it work on candykat rom
@cooldevekopment Is it possible to include TWRP instead of CWM in your kernel. I know there is a patch for f2fs that has TWRP buid-in, but anyway.
da900 said:
@cooldevekopment Is it possible to include TWRP instead of CWM in your kernel. I know there is a patch for f2fs that has TWRP buid-in, but anyway.
Click to expand...
Click to collapse
this kernel has no ramdisk, meaning it doesn't contain nether CWM nor TWRP,
whatever recovery you'll flash the kernel through, it won't be replaced with any other recovery
OmarEinea said:
this kernel has no ramdisk, meaning it doesn't contain nether CWM nor TWRP,
whatever recovery you'll flash the kernel through, it won't be replaced with any other recovery
Click to expand...
Click to collapse
Does this mean I can flash it even on a rooted stockrom?? 4.4.4 108 for example
djdana said:
Does this mean I can flash it even on a rooted stockrom?? 4.4.4 108 for example
Click to expand...
Click to collapse
Nope, because it is based on AOSP kernel source, which won't work on Sony based ROMs,
this kernel will only work on AOSP-based (CM-based) ROM..
To bad haha thanks for the quick reply
Overview:
This is a custom kernel based on Omni sources for our legendary i9000. This is only for 5.1.1/6.0.1 roms and no other version of android will be suppported
It works on any Omni based 5.1.1/6.0.1 rom.
>The zip you will download is flashable via recovery.
>> Use devil kernel manager or NStools to edit the kernel settings.
Features : - Multiple CPU governors (lulzactive, smartassV2, wheatley, lagfree, ondemandX)
- Tweaked smartassV2
- BFQ, Zen, VR & SIOPLUS I/O schedulers added
- Tweaked VR
- New TCP algorithms (westwood is default)
- Bigmem, up to 430mb
- CMA (MM only for now)
- Kernel compressed with XZ
- Compressed initramfs
- Dynamic page writeback
- Dynamic Fsync
- Custom ARM & INT voltages
- Voltages fixed for more stable OC
- Selectable GPU OC (not working properly for now)
- Fast charge
- BLX
- Live OC
- FULL O3 optimisations
- Call volume hack
- Touchwake
- BLN
- Zram
- Swap / Zram optimisations
- LMK tweaks
- SLQB memory allocator
- NEON optimized crypto routines
- Voodoo color
- SquashFS support (module)
- EXfat support (module)
- 720p patched bigmem libs
- Built from the latest Omni source
- Built using custom Cortex-A8 optimized UBERTC 5.3 toolchain of @Cl3Kener
Todo:- Backport more things from higher linux versions and fix remaining conflicts ...
- Fix GPU OC ... Well we have live OC, not worth the time i guess.
- Make CGROUP_TIMER_SLACK work
- GPU driver to DDK [email protected]
- Make a better (and more fancy) updater script
- Fixing the remaining issues [...]
What I wont do : - Enable TV out
- Upgrade linux version
- Add useless CPU governors or I/O schedulers
- make your phone as fast as a i9500
Please use it at your own risk! I am not responsible for any damage that may occur to your device.
Download :
Latest android 5.1.1 kernel :
Kernel_ION.zip MD5 : 2060f96fbffc98a1f2fae9108066b69a
http://www50.zippyshare.com/v/zVr8YvZ4/file.html
Latest android 6.0.1 kernel :
Kernel_CMAEXP.zip MD5 : 236f89a961b559c666a1c064aaccd728
http://www43.zippyshare.com/v/Yxm6WDuA/file.html
Old versions :
https://mega.nz/#F!3x5VTbiQ!87aMOGoDBuQZmiELhKlUkQ
Thanks:
@humberos
@DerTeufel1980
@kasper_h
@Alberto96
@Ezekeel
@xc-racer99, for his help on setting up my Github
@(°_o)
Anyone else who helped me
Source Code:
https://github.com/Coldwindofnowhere/android_kernel_samsung_aries
Custom built UBERTC with A8 optimisations : https://bitbucket.org/Coldwindofnowhere/
XDA:DevDB Information
Omni kernel, Kernel for the Samsung Galaxy S I9000
Contributors
Coldwindofnowhere, xc-racer99
Version Information
Status: Beta
Created 2015-10-02
Last Updated 2016-03-06
>If you like my work, hitting the thanks button won't hurt you<
good luck
Thanks for sharing ! I really want to check this kernel out, can someone tell me what is the recommended Omni LP release to be used with this kernel? A link in PM or a reply would be great.
Sent from my Nexus 7 using Tapatalk
idCyber said:
Thanks for sharing ! I really want to check this kernel out, can someone tell me what is the recommended Omni LP release to be used with this kernel? A link in PM or a reply would be great.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=61937705
Gesendet von meinem SM-G900F mit Tapatalk
idCyber said:
Thanks for sharing ! I really want to check this kernel out, can someone tell me what is the recommended Omni LP release to be used with this kernel? A link in PM or a reply would be great.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
If you can , that would be great if you test if on different 5.1.1 roms and tell me if it works or not
Coldwindofnowhere said:
If you can , that would be great if you test if on different 5.1.1 roms and tell me if it works or not
Click to expand...
Click to collapse
This kernel works with Code rom 5.1.1 the latest build and mostly everything work perfectly. However, to test this i ported it to my good old vibrant. The only issue is since Im guessing devil kernel manager doesnt support vibrant cant seem to change any values in devil. Thanks for building this kernel
falconscrest123 said:
This kernel works with Code rom 5.1.1 the latest build and mostly everything work perfectly. However, to test this i ported it to my good old vibrant. The only issue is since Im guessing devil kernel manager doesnt support vibrant cant seem to change any values in devil. Thanks for building this kernel
Click to expand...
Click to collapse
Assuming you used the kernel source (github.com/omni) to port to the vibrant, you won't have any options other than bigmem. The source code linked there doesn't have things such as Fast Charge, etc.
However, you can see if support for them is there by manually putting a "1" in the file /sys/kernel/fast_charge/force_fast_charge
(ie echo 1 > /sys/kernel/fast_charge/force_fast_charge from a terminal/adb shell).
Also, look out for selinux issues. If selinux is in enforcing mode, the Devil Manager may or may not be able to access the sysfs paths. Run "setenforce 0" to put it to permissive mode.
Speaking of source code, @Coldwindofnowhere have you uploaded the complete kernel source you used somewhere? I'd be curious to see it. Thanks for taking this project on!
xc-racer99 said:
Assuming you used the kernel source (github.com/omni) to port to the vibrant, you won't have any options other than bigmem. The source code linked there doesn't have things such as Fast Charge, etc.
However, you can see if support for them is there by manually putting a "1" in the file /sys/kernel/fast_charge/force_fast_charge
(ie echo 1 > /sys/kernel/fast_charge/force_fast_charge from a terminal/adb shell).
Also, look out for selinux issues. If selinux is in enforcing mode, the Devil Manager may or may not be able to access the sysfs paths. Run "setenforce 0" to put it to permissive mode.
Speaking of source code, @Coldwindofnowhere have you uploaded the complete kernel source you used somewhere? I'd be curious to see it. Thanks for taking this project on!
Click to expand...
Click to collapse
I didnt use the source code to do anything just replaced the boot image with that of vibrant and it seemed to boot up just fine and i could switch between smartass v2, and other addition. the only thing cant change the bigmem option over xl. It was just random since i have no clue how to build stuff.
falconscrest123 said:
I didnt use the source code to do anything just replaced the boot image with that of vibrant and it seemed to boot up just fine and i could switch between smartass v2, and other addition. the only thing cant change the bigmem option over xl. It was just random since i have no clue how to build stuff.
Click to expand...
Click to collapse
Ah, ok. I could be wrong, but I think if you replaced the boot.img with one from the Vibrant, then you're not even using the kernel from here. Weird that you still had the smartassv2 option...
If I'm wrong, someone please correct me
431mb ram possible??
xc-racer99 said:
Ah, ok. I could be wrong, but I think if you replaced the boot.img with one from the Vibrant, then you're not even using the kernel from here. Weird that you still had the smartassv2 option...
If I'm wrong, someone please correct me
Click to expand...
Click to collapse
Im not sure either because i have all govenors mentioned above while i can tweak everyone of them using kernel aditor apk and plus i can also toggle fast charge which wasnt present in omni rom for the vibrant. I have uploaded some screenshots and it is from code rom.
xc-racer99 said:
Assuming you used the kernel source (github.com/omni) to port to the vibrant, you won't have any options other than bigmem. The source code linked there doesn't have things such as Fast Charge, etc.
However, you can see if support for them is there by manually putting a "1" in the file /sys/kernel/fast_charge/force_fast_charge
(ie echo 1 > /sys/kernel/fast_charge/force_fast_charge from a terminal/adb shell).
Also, look out for selinux issues. If selinux is in enforcing mode, the Devil Manager may or may not be able to access the sysfs paths. Run "setenforce 0" to put it to permissive mode.
Speaking of source code, @Coldwindofnowhere have you uploaded the complete kernel source you used somewhere? I'd be curious to see it. Thanks for taking this project on!
Click to expand...
Click to collapse
Sure, i'll set a github soon, but trust me there are only minimal changes to the origianl code (even if adding liveOC seems harder since i only got build errors xD).
Btw i won't build anything this week, i'm busy with exams.
Github is up !
Coldwindofnowhere said:
Could someone help me to setup my github please ? (PM me)
Click to expand...
Click to collapse
Check your PM, let me know if you need more help.
Hey.
I tested it on 5.0.2 . stuck on bootanimation. Better mention that its for 5.1.1 .
Can you add support or please tweak it for 5.0.2
Now iam using RR lp 5.0.2
I removed some apps. And it have the same apps like omni. Its works faster than ever. Working theme engine. Only removed music and added apollo.
Has anyone have a bug where when you call someone the speaker mode work fine but the audio stops working when you turn off speaker mode
I had no problem with original omni kernel any fix because this is an awesome kernel
falconscrest123 said:
Has anyone have a bug where when you call someone the speaker mode work fine but the audio stops working when you turn off speaker mode
I had no problem with original omni kernel any fix because this is an awesome kernel
Click to expand...
Click to collapse
That's weird, i haven't changed anything concerning the audio in the kernel. You're using it on a vibrant right ? This might be the problem. I'm gonna try to reproduce this bug on my i9000 and see ....
Edit: try this http://www42.zippyshare.com/v/aZ6XgBlE/file.html
DO NOT FLASH, IT DOESN'T WORK (except if you want to give me a log or if you're really curious)
Any feedback on the vibrant version ?
Coldwindofnowhere said:
Any feedback on the vibrant version ?
Click to expand...
Click to collapse
The kernel didnt even flash no errors nothing whenever i flashed via twrp it would instantaneously reboot to recovery. Thanks again for atleast trying to fix the issue.
Coldwindofnowhere said:
Any feedback on the vibrant version ?
Click to expand...
Click to collapse
Bro. Can you add fast charge and the governers in omni kernal 5.0.2. Please
Thanks
Introduction
Hello everyone, this is my personal continuation of the famous Flash Kernel by Nathan Chancellor for the OnePlus 5/T.
This kernel is made with a focus on performance, battery life and stability.
You got the choice between a HMP version and a EAS version of the kernel.
Hopefully you will enjoy it!
Important thread information!
If you got issues please provide a log.
If you got feature requests, just ask.
OT is allowed.
Flash instruction
On OOS stock kernel:
- Flash kernel zip
On custom kernel:
- Dirty flash stock rom
- Flash kernel zip
Features
Major features of both (HMP and EAS) kernels
- Up to date with OOS (Stable and Beta)
- Up to date with the latest stable Linux version
- Up to date with the latest CAF tag
- Mainline patches from Linux, focusing on bug fixes/security
- Mainline CFQ scheduler improvements
- Kernel hardening from CopperheadOS
- Disables dm-verity
- Several subsystems converted to use power efficient workqueues
- Accidental touch protection on hardware keys
- Backlight dimmer
- KCAL color control
- Sweep2sleep
- Sound control
- Wakelock blocker
- Latest WireGuard snapshot
- Westwood as the default TCP algorithm
- Built with a self compiled Clang 7.0.3 toolchain
- USB fast charge
- CPU Boost improvements
- Pixel2Oreo WiFi MOD v5 Stable included
- Wake Gestures
- Notification LED Control
EAS specific features:
- Schedutil governor
- Dynamic stune boost
HMP specific features:
- CPU input boost
- Devfreq boost
- Simple LMK
Downloads
Primary
Archive
Sources:
Kernel: https://github.com/crian/kernel_oneplus5
AnyKernel: https://github.com/crian/AnyKernel2
Credits and Thanks:
- @nathanchance for Flash and inspiration
- @osm0sis for AnyKernel2
- @Sultanxda for being a Dev
- @franciscofranco for having some nice stuff
- @RogerF81 for WiFi MOD
- @joshuous and @RenderBroken for EAS
- @azaidi for Adaptive Stune app
- and all the other amazing Devs out there
XDA:DevDB Information
[KERNEL][OOS 8.1.0 TREBLE][CLANG] Reverse Flash, Kernel for the OnePlus 5
Contributors
crian
Source Code: https://github.com/crian/kernel_oneplus5/tree/reflash
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v2.1
Stable Release Date: 2018-10-25
Created 2018-09-13
Last Updated 2019-01-05
Misc
Adaptive Stune app
This app calculates the Dynamic stune boost on the EAS kernel for each activity you are running.
It optimizes battery drain while aiming for 60 FPS.
This a slightly modified version of @azaidi's work.
Instruction
- Install the apk
- Give access and su permission
- Settings are available via long-press shortcut
Download
AdaptiveStune.apk
Source
https://github.com/crian/AdaptiveStune
Great.. Will try out soon.. Hopefully will be as good as what Nathan put out.. Really sad he sold his oneplus 5.
Edit: does this include latest CAF updates?
Sent from my OnePlus 5 using XDA Labs
Is this unified by any chance?
persieghini said:
Is this unified by any chance?
Click to expand...
Click to collapse
Yes it's unified.
Custom support?
evanxyj said:
Custom support?
Click to expand...
Click to collapse
Nope. Currently only for OOS.
crian said:
Nope. Currently only for OOS.
Click to expand...
Click to collapse
Hi! Do you know whether this kernel exposes battery life / capacity information ? I recall when I had a 1+3t some kernels did that.
Added to the OnePlus 5 Index Thread here.
crian said:
Yes it's unified.
Click to expand...
Click to collapse
Sorry for the noob question but does unified mean 5 and 5T or single kernel could be flashed on both Stable and beta OOS for OP 5?
Sy1ar said:
Sorry for the noob question but does unified mean 5 and 5T or single kernel could be flashed on both Stable and beta OOS for OP 5?
Click to expand...
Click to collapse
It supports 5/T and stable/beta.
shadowstep said:
Added to the OnePlus 5 Index Thread here.
Click to expand...
Click to collapse
Thanks!
Nice to see a new kernel here. Wish you good luck
The kernel is running perfectly on Open Beta 18! Thank you very much for continuing the Flash kernel for OxygenOS ROMS.
@franciscofranco @nathanchance It would be awesome if users will download this kernel using FK Kernel...
crian said:
It supports 5/T and stable/beta.
Click to expand...
Click to collapse
Is this hmp or EAS? Gonna give it a try
@crian Seems promising.. Your kernel is actually on par with what @nathanchance put out..
Anyway do you include latest CAF updates as well?
Sent from my OnePlus 5 using XDA Labs
infatality said:
@crian Seems promising.. Your kernel is actually on par with what @nathanchance put out..
Anyway do you include latest CAF updates as well?
Click to expand...
Click to collapse
Latest CAF kernel.lnx.4.4.r27-rel and wlan driver are merged in.
Update to v1.1
Changelog
- Upstreamed to Linux 4.4.156
- CPU Boost improvement (Apps start faster on a cold launch)
- USB fast charge
- Upstreamed Android Binder
- Removed Dynamic SchedTune Boost (it is not very effective on a HMP kernel)
Download
Primary: https://raw.githubusercontent.com/crian/rf-zips/master/stable/ReverseFlash-OP5-v1.1.zip
Archive: https://github.com/crian/rf-zips/tree/master/stable
Commits: https://github.com/crian/kernel_oneplus5/commits/reflash
Thanks @crian! I've been waiting for something like this! Great to see someone's continuing Nathan's great work