Develop Bugs

[Q] Cannot Update My S3

Hello fellas! It's my first post here, but I've been a member for quite a while now. Anyway my question is how do I update my Samsung galaxy s3. It's an At&t s3 but I use T-Mobile on it. I'm stuck with the 4.1.1 because I can't update it. Whenever I try it says software update interrupted check again in 48 hours. I did search through the forums about this and someone fixed this by using another sim, I tried that but it didn't work.
A couple things to note, I did root my S3 with the cyanogenmod but I went back to stock rom and did the triangle away. I also unlocked my phone using that dial method. Please help me guys. Thanks!
Oh and here's a picture, the continue update is grayed out.

FreaKeyy said:
Hello fellas! It's my first post here, but I've been a member for quite a while now. Anyway my question is how do I update my Samsung galaxy s3. It's an At&t s3 but I use T-Mobile on it. I'm stuck with the 4.1.1 because I can't update it. Whenever I try it says software update interrupted check again in 48 hours. I did search through the forums about this and someone fixed this by using another sim, I tried that but it didn't work.
A couple things to note, I did root my S3 with the cyanogenmod but I went back to stock rom and did the triangle away. I also unlocked my phone using that dial method. Please help me guys. Thanks!
Oh and here's a picture, the continue update is grayed out.
Click to expand...
Click to collapse
You have 2 options ...
1) Find a valid AT&T SIM and temporarily place that in your phone to get an OTA update via Wi-Fi
2) Install custom recovery (TWRP or CWM) and manually update to 4.3 using the stock restore image posted in the thread below
http://forum.xda-developers.com/showthread.php?t=2658486
This will unroot your phone (if currently rooted), update your system to full stock 4.3, reinstate stock recovery and reset your flash counter.

Larry2999 said:
You have 2 options ...
1) Find a valid AT&T SIM and temporarily place that in your phone to get an OTA update via Wi-Fi
2) Install custom recovery (TWRP or CWM) and manually update to 4.3 using the stock restore image posted in the thread below
http://forum.xda-developers.com/showthread.php?t=2658486
This will unroot your phone (if currently rooted), update your system to full stock 4.3, reinstate stock recovery and reset your flash counter.
Click to expand...
Click to collapse
Thanks Larry. I tried using another sim before and it didn't work. But then again that sim wasn't At&t. Hopefully the first option works. Now I'll have to look for an At&t sim card.

FreaKeyy said:
Thanks Larry. I tried using another sim before and it didn't work. But then again that sim wasn't At&t. Hopefully the first option works. Now I'll have to look for an At&t sim card.
Click to expand...
Click to collapse
Using an AT&T SIM should be fail proof to receive the OTA.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

FreaKeyy said:
Thanks Larry. I tried using another sim before and it didn't work. But then again that sim wasn't At&t. Hopefully the first option works. Now I'll have to look for an At&t sim card.
Click to expand...
Click to collapse
Just to add that OTA update could take anything from 30 minutes to 2 hours depending on the speed of your Wi-Fi connection so if you are 'borrowing' someone's SIM, to have an idea of how long you'll be needing it.

[Q] Update Failed? Problems while updating to 4.4.4)

Hi,
My name is Asaf and I have a kinda weird problem:
I cannot update my phone to 4.4.4 (it's on 4.4.2)
My model is 4.4.2.
So the thing is:
I tried to update and it failed,
tried again and again for 2 months and I still can't.
Today I've installed Samsung Kies 3 and it failed to update.
I live in Israel and I don't think it matters.
It is T Mobile's phone and they aren't working in israel all tough I can call and SMS and use my 3G.
I don't want to flash and I am unrooted (I had root) and I have 3.5GB of memory.
Device Information:
Android Version: 4.4.2
Model Number: GSH-M919
Firmware Number/Build Number: M919UVUFNB4
Kernel Version: 3.4.0-540242
I got my phone from T Mobile
My carier is: Golen Telecom (again, I'm from Israel, this is an Israeli company.)
Thanks for helping!

You need to provide much more information like exact model number, exact firmware version that's running on phone now, what carrier your using and also your shoe size.
In order to get the best help you need you must provide better info.
You may be trying to install the wrong update.
Pp.

PanchoPlanet said:
You need to provide much more information like exact model number, exact firmware version that's running on phone now, what carrier your using and also your shoe size.
In order to get the best help you need you must provide better info.
You may be trying to install the wrong update.
Pp.
Click to expand...
Click to collapse
I did update the topic, try helping me ok?
and It's my phone's update I can't do that wrong.

Go here http://forum.xda-developers.com/showthread.php?p=54155517 follow instructions in post #8 , if doesn't work the first time do a factory reset then repeat procedure with odin 3.07 .
Refer to YouTube on how to flash firmware tmobile S4, there are many videos on this subject, just make sure it's tmobile, not Att or Verizon.
You should have no issues.
Afterwards you can use Chainfire's autoroot to root new firmware.
Pp.

PanchoPlanet said:
Go here http://forum.xda-developers.com/showthread.php?p=54155517 follow instructions in post #8 , if doesn't work the first time do a factory reset then repeat procedure with odin 3.07 .
Refer to YouTube on how to flash firmware tmobile S4, there are many videos on this subject, just make sure it's tmobile, not Att or Verizon.
You should have no issues.
Afterwards you can use Chainfire's autoroot to root new firmware.
Pp.
Click to expand...
Click to collapse
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.

AsafOV said:
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
Click to expand...
Click to collapse
Download this free app from the Play Store:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Then, take screen shots of the General, Firmware and Android screens. (You can take screenshots by holding down the Power and Home at the same time until you hear the camera sound).
Then, post those screens.
This will tell us what you have.
My guess is that the T-Mobile OTA updates may not work for phones outside of the US, but I could be wrong.
You may have to flash the phone using ODIN if you have a Windows PC. There are lots of threads on flashing the Stock Roms.
You can download the firmware from either Sammobile.com or this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob

AsafOV said:
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
Click to expand...
Click to collapse
Its not a rom it's a firmware, official from Samsung, which is exactly what an update does. Other than an OTA, it is the only way to update your device

AT&T Galaxy Note 4 N910A 5.1.1 Root for CM?

Hey,
Still a bit of a noob to the whole rooting process and navigating XDA forums, so I'm having trouble finding the information *I think* I should be looking for. Basically, my phone's just begun crashing periodically, multiple times a day: anything from Camera, Process System, Touchwiz Home Launcher, or Samsung Apps have "stopped working" / "not responding" before. Of course, my phone's warranty has expired, but my contract isn't up so an AT&T Store wont re-image it for me :crying:
Even I can tell, at this point, that it's either my OS that's failing, or it's my hardware. I figured the easiest way to test this would be to put some stable CyanogenMod on it.
The information I'm looking for is: "is this possible?"
AT&T Samsung Galaxy Note 4
SM N910A UCU2DOI2
Currently @ 5.1.1
Thanks for reading,
~Vita.

No it is NOT possible to use any form of custom firmware or to root this device. It has a locked bootloader that has yet to be cracked open and the future of that happening os very bleak to non existant.
As for reimaging the device go to the note 4 at&t general section on the forum and read up on using odin and the 5.1.1 image posted there it will wipe the phone and format yhe system and data partitions and reinstall it like a new phone just like at&t would do or the manufacturer if you sent it to them.
Good luck

Thanks for the response.
Sorry for the dumb question, but isn't Odin able to flash any firmware onto a device? The "locked bootloader" means that only the stock OS may be reinstalled? Why is this...
Also, it seems unlock progress is being made on the N910V. Maybe hope?
Thanks for mentioning Odin, I'll try re-imaging the phone.
~Vita.

Ricovita said:
Thanks for the response.
Sorry for the dumb question, but isn't Odin able to flash any firmware onto a device? The "locked bootloader" means that only the stock OS may be reinstalled? Why is this...
Also, it seems unlock progress is being made on the N910V. Maybe hope?
Thanks for mentioning Odin, I'll try re-imaging the phone.
~Vita.
Click to expand...
Click to collapse
Well the problem is the kernel the bootloader prevents the devs from using an unsecure kernel (one not created and signed by at&t) on the phone if one is used the phone stops boot and says it is an unsecure non at&t kernel and to take thenphone to at&t store.
Odin can only write the firmware versiom that is currently on this phone in this case it is 5.1.1 if you flash any other note 4 versoin such as 4.2.2 it will brick.
Sm-910a flash example
Update ver Official at&t 5.1.1 / currently on phone 5.0.1 or 5.1.1 = good
Update ver (downgrade)oficcial at&t 4.2.2 / currently on phone 5.0.1 or 5.1.1 = brick not good or odin fail
Update from another carrier such as tmobile or verizon for 910t 910v 910g = fail (do not attempt)
Until oir boot loader is unlocked there is nothing we can do to mod or use custom firmware on this phone any attempt leads to a brick requiring using odin to re-flash the latest firmware (5.1.1 at this time) in order to make the phone functional again.

giga8547 said:
Until oir boot loader is unlocked there is nothing we can do to mod or use custom firmware on this phone any attempt leads to a brick requiring using odin to re-flash the latest firmware (5.1.1 at this time) in order to make the phone functional again.
Click to expand...
Click to collapse
So from what I understand, I could use Odin to flash the 4 files which correspond to the specific AT&T 5.1.1 SM-901A version of my phone (which is exactly what I have) to re-image the device and make it functional again. The problem is, I cannot find these devices on sammobile D:
Could someone direct me to these files? Or are they not out because AT&T sucks? Or, what.
~Vita.

Ricovita said:
So from what I understand, I could use Odin to flash the 4 files which correspond to the specific AT&T 5.1.1 SM-901A version of my phone (which is exactly what I have) to re-image the device and make it functional again. The problem is, I cannot find these devices on sammobile D:
Could someone direct me to these files? Or are they not out because AT&T sucks? Or, what.
~Vita.
Click to expand...
Click to collapse
Look in odin files in progress thread.
Sent from my SAMSUNG-SM-N910A using Tapatalk

Is it possible to downdraft from 5.1.1 to 5.0.1

firebird7880 said:
Is it possible to downdraft from 5.1.1 to 5.0.1
Click to expand...
Click to collapse
I think so, I don't know for sure but we've been able to Odin from various 5.0 Lollipop releases back to KitKat so should be fine.

downgrading from 5.1.1 or 5.0.1 to kitkat is possible but with many many problem but form 5.1.1 to 5.0.1 i don't know maybe phone will stuck or boot loop
thanks finitetime for your reply
other question are there any news about root for 5.1.1 n910a

help
my att note 4 is unlocked and it still won't let me install custom rom's

mouseman1 said:
my att note 4 is unlocked and it still won't let me install custom rom's
Click to expand...
Click to collapse
I am sure that you are referring to a sim unlock. A sim unlock and unlocked bootloader are two completely different entities. To flash a custom rom you will need to have your bootloader unlocked, which is something that a few of us are currently working on. Until then, no custom roms can be flashed on the att variant Note 4s. Take care

the boot loader says Qualcom secure boot : disabled ?
in the boot loader screen ?

mouseman1 said:
my att note 4 is unlocked and it still won't let me install custom rom's
Click to expand...
Click to collapse
Your phone is SIM UNLOCKED which has NOTHING to do with root, bootloader, or custom roms.
Sent from my SAMSUNG-SM-N910A using Tapatalk

mouseman1 said:
the boot loader says Qualcom secure boot : disabled ?
in the boot loader screen ?
Click to expand...
Click to collapse
Sorry, was off the forum for the weekend. Spexwood was correct, that is sim unlock. Qualcom is for the sim IE network. Take care.

Root is possible btw
Root is possible if youre willing to dedicate 10-30 hours of repititive root fails

How?
Press Buttons said:
Root is possible if youre willing to dedicate 10-30 hours of repititive root fails
Click to expand...
Click to collapse
How is root possible? What's the process ?

Just made a jump from note 2 to note 4 - Need suggestions

Hello community,
I got a Note 4 N910V and the jump was something incredible. I am in love with the thing.
My note 2 was rooted and had the Resurrection Remix rom. I felt free to customize it since I didn't have to worry about the bootloader or anything but it was really sluggish.
My note 4 came with 5.0.1(stock rom) and skiming through the forums I'm seeing things like 'safely upgrade to MM'. Makes me thing the OTA update ain't working right for everyone.
I'm not getting any OTA updates, could be because I'm not in the US and my phone is unlocked for a local telco.
I have a couple of questions
- Is the MM update fine? Battery, performance, root? how would I update if I'm not getting any OTA updates?
- I know about kingroot but is it recommended as the root option for my OS version. I found this but It's been a long time since I rooted a phone.
- Any popular ROM/Mods? RR was a big thing in the note 2 community (also a couple of custom kernels).
Pics of what I got down below.
Thank you for your time.

I'm using this phone on Bell Mobility in Canada and was unable to get the OTA. I have no intention of rooting this phone yet.
I was able to get the stock 6.0.1 OTA file from here:
http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937
I was able to update using the stock recovery without issue....

crutzulee said:
I'm using this phone on Bell Mobility in Canada and was unable to get the OTA. I have no intention of rooting this phone yet.
I was able to get the stock 6.0.1 OTA file from here:
http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937
I was able to update using the stock recovery without issue....
Click to expand...
Click to collapse
Hey man thank you for your answer!
Did you have any problems with the unlocked properties (telco wise, no bootloader) when flashing these things?
I also checked my download mode and doesn't say anything about developer. Seems fine showing up Odin mode so I'm going to assume this is a retail version.

demiorkan said:
Hey man thank you for your answer!
Did you have any problems with the unlocked properties (telco wise, no bootloader) when flashing these things?
I also checked my download mode and doesn't say anything about developer. Seems fine showing up Odin mode so I'm going to assume this is a retail version.
Click to expand...
Click to collapse
The only way to get an ota is to be on Verizon. Other wise you'll need to download the update and flash with Odin or flash with stock recovery.
The reason for the "safe update to mm" threads are for people who rooted and unlocked the boot loader. You'll need to follow one of those threads if you want root. Nothing wrong with just updating to mm other than you'll have to downgrade to 5.1.1 if you later decide you want root and unlocked boot loader
These phones become really unstable if you just try to root and you lose root once you restart the phone.
Sent from my SM-N910V using Tapatalk

Downgrading 6.0.1 to 5.1.1

Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks

@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?

djisback said:
@tjmethod by chance how did you process go, did you manage to root and unlock bootloader?
Click to expand...
Click to collapse
I bought the phone already with 6.0.1 on it and read that you cannot unlock/ root it with mm on it and can only be done after downgrading to 5.1.1 so I haven't done anything yet

I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?

tjmethod said:
Hi if anyone can help- I'm on the Verizon Samsung Galaxy Note 4 after 2 Note 7's and a Note 3 before that on Biggin's so I've sorta been out of the root game. I want to downgrade from 6.0.1 to 5.1.1. I am downloading the full firmware for the Note 4 from further back in this thread (N910VVRU2CPA1) and am currently on (N910VVRU2CPG2).
From what I understand, I need to do a factory reset, then go to Odin and flash the firmware. I have Odin 3.10.7 and am downloading the N910VVRU2CPA1 as we speak. I see 'hsbadr' firmwares in his thread and the PIT file TRLTE_USA_VZW.pit which I'm not sure is compatable pit file for the specific 5.1.1 firmware or the necessary pit file is included in the full firmware and can anyone tell me if these are the right steps?are these the right steps Any information would be greatly appreciated,
Thanks
Click to expand...
Click to collapse
sudermatt said:
I'm in the same boat...Coming from a n7. Bought a n4 on eBay...It's got 601. Want to root...Guess we need to downgrade....Is it possible?
Click to expand...
Click to collapse
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.

quinciebee said:
Before you can start rooting, you'll need to be on 5.1.1 BPA1. If you're currently on 6.0.1, just download the BPA1 firmware from Sammobile, factory reset on 6.0.1, then flash BPA1 stock via Odin.
Click to expand...
Click to collapse
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?

tjmethod said:
Hi thanks, I had called Samsung and talked to top tier tech support and was told that once the phone has been upgraded to 6.0.1., it cannot be downgraded. and that i need to search the rooting sites and try to find where someone has found a breach or workaround for unlocking the bootloader which will usually have a bounty but I dont know. top tier tech support has always been good. Do you think thats false it cannot be downgraded?
Click to expand...
Click to collapse
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.

quinciebee said:
It's definitely false, when I rooted my phone, I downgraded from 6.0.1 to 5.1.1 without any issues.
Click to expand...
Click to collapse
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?

tjmethod said:
I will definately give it a go when I have the time, have you flashed a rom and if so which one, there must be some or some tweaks to get rid of the lag?
Click to expand...
Click to collapse
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.

quinciebee said:
I'm currently using CM13 because of Xposed and overall stability, but there are newer roms out there.
Click to expand...
Click to collapse
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-

tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.

ziggy71 said:
You want the PA1. It's really easy. Just sounds more complicated then it is. I am using the PaulPizz rom. It is very stable, good battery life, and spen and sview work. If you need any help, let me know.
Click to expand...
Click to collapse
Thanks bro I don't if I'll have time til this weekend to do this- Does this rom have tweaks to fix the aggravating galaxy lag? With a non rooted phone there's goin into recovery and deleting cache, DU speed and phone booster, cleaned but it's like they all have it- thanks again- lookin forward to rooting this damn thing

tjmethod said:
I am a little confused as to whether I've found the right firmwares but I've found the firmwares here:
https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
If I am downgrading to 5.1.1. which this phone was obviously on before, I don't know what this phone was on since it currently is on the PL1 build which are not one of the two 6.0.1. builds on this page. I don't even know if that matters.. Anyway, the two 5.1.1. builds are PA1 and OK3. Do you know where any other firmwares out there that might show my current one and the previous build that it came from?
Thanks-
Click to expand...
Click to collapse
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.

kevintm78 said:
Yeah they're out there but that thread hasn't been updated recently. Basically the order after pf3 is pg2, pj2, and then cpl1. The one you want, if your planning on rooting, is bpa1. Also, as far as your question in the op about the pit file, it should really only be used if absolutely necessary. It's in case your partitions have been corrupted for some reason and you need to repartition your device.
Edit- I was going to link to those other firmwares but they are buried in the thread that your already looking in. Either way they aren't necessary for you to unlock your bootloader, you can go straight from cpl1 to bpa1.
Click to expand...
Click to collapse
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ

tjmethod said:
Hey thanks for confirming all this. So all I need to download and install is the bpa1 firmware via Oden with the AP button I think- I've got a few different versions of Oden on my pc. It's been a while since I've flashed firmware on a phone but I remember it was easy. So just save my pictures, any files, etc. on the sd card, remove it, then do a factory reset or when I put the setting into usb download mode, and flash the firmware this will automatically factory reset the phone? Also earlier today Verizon has been trying to push an software upgrade. After I unlock the bootloader and install twrp then flash a rom, do I need to somehow disable the update notice. I remember having to do that once with another phone.
What rom are you on? Thanks again for the Info-
TJ
Click to expand...
Click to collapse
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.

kevintm78 said:
Yeah that all sounds spot on. I would definitely do the factory reset before you start, but other than that your good. To block the updates, you can uninstall the SDM apps. There are 2 of those and you'll need root to remove them, but you can disable them without root with that debloater tool. The rom I'm currently using is kind of work in progress. I have a couple stock based roms in the dev section, one is stock_plus that has a stock feel with some mods added and the other is Modest Rom that is got some grace apps added and system ui mods. You can find them here and here if you want to check them out.
Click to expand...
Click to collapse
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-

tjmethod said:
Awesome, I'm going to check those out but I forgot the biggest question of all... how to get rid of the Galaxy lag- is there a rom or tweak where this can be fixed since recovery cache delete and cleaning tools dont really do much?
Thanks again-
Click to expand...
Click to collapse
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.

kevintm78 said:
Custom kernels help a lot. The problem is it's kind of slim pickings for our specific model, but some of the international kernels work well too. Oscar kernel is made for the 910v so that's probably the most reliable but if your like me, I like to use a permissive kernel and Ram kernel is not a bad choice for that though it's not as feature rich.
Click to expand...
Click to collapse
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!

tjmethod said:
I really dont know the difference... from what I remember a kernel is the layer between the software and the hardware- a key component of the os. I'm guessing the permissive ones can be used for different roms or firmware? You can probably tell I really don't that much about the root game. The last time I flashed a firmware was on my note 3 after I bricked it. Then rerooted and got on to biggins rom which was great ut I never understood or learned how to use xposed. Anyway, I downloaded Modest Rom, PJ2 _STOCK .tar and am downloading cpl1_tar but I know that once I flash bpa1 firmware which puts the phone back on 5.1.1. I see your roms are 6.0.1 roms, after I flash the bpa1, will the bootloader be unlocked? If so can I then just flash the cpla1_tar or is that not a full firmware? or use one of the two 6.0.1 firmwares from where I found the cpa1? Are the kernels different from 6.0.1 and 5.1.1 and where to find the downloads?? I appreciate the tips especially coming from a develpoer and i'm happy to make a donation- I'm not sure how?
Thanks again!
Click to expand...
Click to collapse
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.

kevintm78 said:
Hey buddy, did you get it figured out? I broke my arm at work on Sunday and of course it's my right arm so I'm having some issues responding back on my note with one hand. I bet I've dropped this thing 20 times already.
Click to expand...
Click to collapse
Oh man that sucks- hopefully they gave you some good pain meds. Anyway, I havent taken th plunge yet- once I get on to 5.1.1 then twrp, I want to go on to 6.0.1 but am unsure as to what point the bootloader is unlocked or exactly what to do to upgrade to 6.0.1 once I crack the bl. I just dont want to go through the dreaded set up everything twice.