Related
A few weeks ago I installed a blackjelly rom on my telus s3, and then proceeded to install codenameandroid. It worked great for a while but then I decided to see if I could unroot my phone and install stock rom. I did this using Odin and it worked great as well with no issues. My problem now is I am trying to install roms again and whenever I do so, after the installation and reboot I get stuck in the Samsung Galaxy loading screen. I have left it there for 5 minutes with no change. I even tried flashing the blackjelly rom the same way I did the first and nothing is changing. Lastly, when I try to flash Hellfire, i always get the message status 7. I have wiped everything, formated /system, and wiped all caches. Any suggestions?
-I am using latest CWM.
-It is rooted with superuser
All help will be appreciated.
if stuck at the samsung screen, pull battery, reboot recovery,wipe cache, wipe dalvik, maybe even fix permissions, reboot
thebig7 said:
A few weeks ago I installed a blackjelly rom on my telus s3, and then proceeded to install codenameandroid. It worked great for a while but then I decided to see if I could unroot my phone and install stock rom. I did this using Odin and it worked great as well with no issues. My problem now is I am trying to install roms again and whenever I do so, after the installation and reboot I get stuck in the Samsung Galaxy loading screen. I have left it there for 5 minutes with no change. I even tried flashing the blackjelly rom the same way I did the first and nothing is changing. Lastly, when I try to flash Hellfire, i always get the message status 7. I have wiped everything, formated /system, and wiped all caches. Any suggestions?
-I am using latest CWM.
-It is rooted with superuser
All help will be appreciated.
Click to expand...
Click to collapse
^ what he said or try using Kies to back to stock and start from there. Guide is here : http://forum.xda-developers.com/showthread.php?t=1984717
Sorry if there's already a thread for this, kind've in a slight panic and I'm relatively new to this.
I just rooted my Note 3 and everything worked, I then went to install a custom rom called Darthstalker Note3 V2 (not blaming the rom/developer)
and I followed all the steps:
Did my backup, then went into CWM
Wiped data/factory reset
Wiped my cache partition, then wiped Dalvik Cache
Went to Mounts And Storag" And Then format/system
Installed the rom from my sd card, and it said Install Complete, enjoy DarthStalker
I went to reboot my phone and its stuck in a boot loop, it just says Galaxy Note 3, screen goes black, repeat.
I have tried re-wiping the dalvik cache, but with no luck. Any help would be greatly appreciated
Nickamortis said:
Sorry if there's already a thread for this, kind've in a slight panic and I'm relatively new to this.
I just rooted my Note 3 and everything worked, I then went to install a custom rom called Darthstalker Note3 V2 (not blaming the rom/developer)
and I followed all the steps:
Did my backup, then went into CWM
Wiped data/factory reset
Wiped my cache partition, then wiped Dalvik Cache
Went to Mounts And Storag" And Then format/system
Installed the rom from my sd card, and it said Install Complete, enjoy DarthStalker
I went to reboot my phone and its stuck in a boot loop, it just says Galaxy Note 3, screen goes black, repeat.
I have tried re-wiping the dalvik cache, but with no luck. Any help would be greatly appreciated
Click to expand...
Click to collapse
Go get TWRP instead. Jovy says to use it and not CWM for his rom. Grab TWRP 2.3.6.7 and repeat the process. Factory wipe and then wipe system then install the ROM. Do NOT restore a nandroid you may have taken with CWM.
Will I be able to install TWRP if I can't boot my phone? Because right now I can only get into CWM Sorry for the late reply, was at work.
Nickamortis said:
Will I be able to install TWRP if I can't boot my phone? Sorry for the late reply, was at work.
Click to expand...
Click to collapse
power+vol. down+home will get you to bootloader & install the tar version of TWRP under PDA.
Thank you Zoth and HughesNet, got it working. Next time I'll read more details
Have a Note 3, rooted, flashed Jedi Elite about 3 months ago, works like a champ.
Randomly today during normal usage, phone froze, reset, then gives me this message
"Device memory damaged - the data partition has been corrupted. You need to reset your device to factory defaults. This will erase all the data on your device"
Tried that, didn't change anything (booted right back to the same screen), Went into the bootloader, wiped the cache, no change, tried a factory reset from there, no change, tried 're-rooting' it (a suggestion online), root worked, no change ( still booting to the same screen )
Help! Can't find any help online, in desperate need of guidance.
doctorc501 said:
Have a Note 3, rooted, flashed Jedi Elite about 3 months ago, works like a champ.
Randomly today during normal usage, phone froze, reset, then gives me this message
"Device memory damaged - the data partition has been corrupted. You need to reset your device to factory defaults. This will erase all the data on your device"
Tried that, didn't change anything (booted right back to the same screen), Went into the bootloader, wiped the cache, no change, tried a factory reset from there, no change, tried 're-rooting' it (a suggestion online), root worked, no change ( still booting to the same screen )
Help! Can't find any help online, in desperate need of guidance.
Click to expand...
Click to collapse
if you have no choice, I would recommend flashing through ODIN the new firmware, or which ever firmware you have installed on your phone..
goto recovery,, wipe system, data, cache, dalvik cache, then ODIN your firmware.. this way you will have a fresh clean install, see what happens after that,
544
mdiaz33685 said:
if you have no choice, I would recommend flashing through ODIN the new firmware, or which ever firmware you have installed on your phone..
goto recovery,, wipe system, data, cache, dalvik cache, then ODIN your firmware.. this way you will have a fresh clean install, see what happens after that,
Click to expand...
Click to collapse
Tried, everything seemed to go well, but on boot up after flashing the ROM, same screen about corruption of memory.
Seems like I might want to try the re-partition option, which requires a pit file, but can't find the right file (SM-N900T)
doctorc501 said:
Tried, everything seemed to go well, but on boot up after flashing the ROM, same screen about corruption of memory.
Seems like I might want to try the re-partition option, which requires a pit file, but can't find the right file (SM-N900T)
Click to expand...
Click to collapse
After boot up of the stock ROM it still said that?
If you Odin the stock room boot into the stock recovery and factory reset. You can also do this in the settings menu under storage. This will wipe your phone
Sent from my SM-N900T using XDA Premium 4 mobile app
Hello everyone,
This is what is happening to me. I was trying to flash Miroslav's Cyanogenmod 11 RC2 with Philz Touch 6.07.9, but none of the recomended methods worked for me, I just got stuck on lg logo bootloop - I really want this rom but it is hard as f**k to flash -. So I tried to go back to CM 10.2.1 and got the "Status 7" error. Very frustrated, I finally used my stock recovery image and it worked fine.
From this point, i was recovering my apps and data using titanium back up and when it finished, a notification asked if I wanted the official system update. I refused it and proceded to reboot. Now the phone boots instantly to recovery mode and show the purple screen of Philz touch. First I wiped cache and dalvik and got the same bootloop. Then I wiped cache, dalvik and factory reset and got the same bootloop. Finally, I formated system, factory reset, wiped cache, wiped dalvik and flashed again my recovery image, and got again the recovery mode bootloop.
Any Ideas? Thank you for your help.
Best regards.
EDIT: I must clarify that when I flash my recovery image, it ALWAYS get suck on a part that says something like "installing android security". I have to press power button 10 seconds to restart but it boots normaly in the stock rom.
chortiman said:
Hello everyone,
This is what is happening to me. I was trying to flash Miroslav's Cyanogenmod 11 RC2 with Philz Touch 6.07.9, but none of the recomended methods worked for me, I just got stuck on lg logo bootloop - I really want this rom but it is hard as f**k to flash -. So I tried to go back to CM 10.2.1 and got the "Status 7" error. Very frustrated, I finally used my stock recovery image and it worked fine.
From this point, i was recovering my apps and data using titanium back up and when it finished, a notification asked if I wanted the official system update. I refused it and proceded to reboot. Now the phone boots instantly to recovery mode and show the purple screen of Philz touch. First I wiped cache and dalvik and got the same bootloop. Then I wiped cache, dalvik and factory reset and got the same bootloop. Finally, I formated system, factory reset, wiped cache, wiped dalvik and flashed again my recovery image, and got again the recovery mode bootloop.
Any Ideas? Thank you for your help.
Best regards.
EDIT: I must clarify that when I flash my recovery image, it ALWAYS get suck on a part that says something like "installing android security". I have to press power button 10 seconds to restart but it boots normaly in the stock rom.
Click to expand...
Click to collapse
When in vain , unbrick your phone again using unbricking guide and use CWM , not all guide is working for the same type of phone . No need to wipe system clean cache watevr **** you were told unless recommended by developer and just factory reset then flash the rom
Mr.201 said:
When in vain , unbrick your phone again using unbricking guide and use CWM , not all guide is working for the same type of phone . No need to wipe system clean cache watevr **** you were told unless recommended by developer and just factory reset then flash the rom
Click to expand...
Click to collapse
Thanks for the answer and the advice about factory reset. Yes, I had to unbrick my phone and by the way, still could not install miroslav's cm11 RC3 using Philz touch 6.19.3.
But I have another issue: I successfully got back to CM 10.2.1 but after I restored my apps using Titanium Backup, I rebooted the phone and got stuck on CM logo for half hour. I wiped dalvik and got the same result. Then wiped cache and dalvik and still stuck. What should I do? Flash again the rom? The restored data is from CM 10.2.1 so I don't see any problem....
chortiman said:
Thanks for the answer and the advice about factory reset. Yes, I had to unbrick my phone and by the way, still could not install miroslav's cm11 RC3 using Philz touch 6.19.3.
But I have another issue: I successfully got back to CM 10.2.1 but after I restored my apps using Titanium Backup, I rebooted the phone and got stuck on CM logo for half hour. I wiped dalvik and got the same result. Then wiped cache and dalvik and still stuck. What should I do? Flash again the rom? The restored data is from CM 10.2.1 so I don't see any problem....
Click to expand...
Click to collapse
check again what you restore, user apps will have no problem to restore but system apps will cause incompatibility to the rom and crash it
Mr.201 said:
check again what you restore, user apps will have no problem to restore but system apps will cause incompatibility to the rom and crash it
Click to expand...
Click to collapse
The phone is good now, I restored the stock rom and from there I flashed CM 10.2.1 just making a factory reset. Plus I flashed adreno drivers and gapps. Once it booted, I restored my apps without sistem data and now the phone works properly.
Thank you Mr.201
chortiman said:
The phone is good now, I restored the stock rom and from there I flashed CM 10.2.1 just making a factory reset. Plus I flashed adreno drivers and gapps. Once it booted, I restored my apps without sistem data and now the phone works properly.
Thank you Mr.201
Click to expand...
Click to collapse
Glad it worked, make sure you untick 'system' in filter in titanium backup so that you can only see your user apps .
I flashed a rom and then this problem started happening since. My phone tries to go to the samsung boot animation screen but never goes through it, it vibrates and then reboot, i tried installing stock rom, etc, i can now go to recovery and download mode.
You might need a jtag
But if i can go through recovery and download mode, maybe there is something i could do to fix this issue?
errusdan said:
But if i can go through recovery and download mode, maybe there is something i could do to fix this issue?
Click to expand...
Click to collapse
I Can install firmware through download mode.!""
Me too, i tried installing stock firmware and all that. Even i am able to use the aroma filemanager from recovery, to see all my files, and when i delete system, preload, data, cache, etc i can see that in fact the device deletes them correctly.
Sorry I miss understand, you can go in download and recovery, my bad.
Have you tried factory reset, Flash original firmware, factory reset, let it boot
What was your original firmware which file(s) did you use?
When the thing you said happened i went on the store and Luckly they replaced my phone. Your phone probably ruined thats what happens when you play with it:cyclops:
Yeah i know that there are risks when you install another roms and such. I've read that it can corrupt your internal sd card, maybe that is what happened to me? because i tried installing different firmwares, kernels, recoveries, wipe data, wipe cache, wipe dalvik cache, wipe system, wipe preload, etc, even i tried installing boot animations, and it stucks at the boot animation screen samsung galaxy, it tries to load but then it vibrates and restart like a loop.
I am now with the russian 4.4.2 rom, and yes i know that i cannot downgrade because of the bootloader version. But i tried installing modified roms with zip (like cm 11) in recovery, and it installs correctly without errors, the problem is with the bootloop.