recover after broken screen, modify default.prop to disable secure USB debug? - Sprint Samsung Galaxy S III

Dropped my S3 today, and now the screen doesn't respond to touch. The display also only works partially. This is the excuse I needed to get an S5, but I'd like to pull data off this S3 for the transition. Honestly I'm not even sure there's anything important on there that isn't already backed to the cloud one way or another. But I'd like to poke around to be sure, use Titanium backup for at least a few apps in particular.
So I found this nice utility: http://forum.xda-developers.com/showthread.php?t=2786395 to allow me to control the device and see the screen via adb. Problem is that while USB debugging is enabled, I have to confirm the RSA fingerprint of my PC on the device itself... which I can't do because the digitizer on the phone is broken. Some searching suggests using a USB OTG to connect a mouse to blindly try to hit the RSA confirmation button. Either it doesn't work, or the cable I hacked together didn't cut it. I couldn't get off of the keyguard screen. Ordered a premade OTG adapter, but if that still fails I may have to find another way in.
From what I've read, I can disable the RSA check by setting ro.adb.secure=0 in default.prop, but that file would need to be replaced on the boot ramdisk. Making a custom boot image isn't something I've done. I found this article about it, "HOWTO: Unpack, Edit, and Re-Pack Boot Images". Following that article, should my boot.img come from extracting the L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5 file? And then once I've recompiled boot.img with the modified default.prop, what is the proper method for flashing that boot.img? Do I need to use odin?
The device has stock NJ2+root and Philz Touch recovery. The display and hardware keys work well enough that I can navigate recovery and initiate anything in there, and I can get to an adb shell while the device is booted in recovery.
So two questions...
1) am I on the right track to make and flash a custom boot.img?
2) is this all pointless? would I be better served to simply use recovery to copy down a backup image and extract anything I may need from that? That main data I'm concerned about is keys/etc for 2-factor apps like google authenticator and battle.net.
EDIT: As far as getting in, I couldn't figure out how to make that app work properly for controlling the phone. It could show me the screen, but apparently not send touch input.
BUT, the solution to bypassing secure adb was easy. Since I had a custom recovery and could get adb shell while booted in recovery, I could shell in, mount data, and push my local adbkey.pub to /data/misc/adb/adb_keys. VMLite VNC Server was the easiest way I found to access the system remotely, since I could push the app install from the play store on the web and then use the companion desktop app to launch the server on my phone via adb.

Related

[N2E][1.0][1.0.1] TouchNooter 1.6.24

This will officially not work for 1.1
What it does:
Enables ADB via uRamdisk
Installs su and Superuser.apk
Installs Busybox
Installs Button Savior
Installs Go Launcher
Installs NookColor Tools (To Enable Non-Market Installs)
Installs Gapps (Gmail, Market, Youtube, Others)
System Files that get Modified:
/system/build.prop - Enabling Google Check In
packages.xml - Allows Gapps to install properly.
framework.jar - Should allow a proper Android ID to generate.
Changes:
June 24, 2011 -
Removed: Multitouch Permission
Added: Modified framework.jar
June 22, 2011 - Fixed: Script not running at boot.
June 20, 2011 - Initial Release
Before you begin:
You must already have a registered Nook Simple Touch
You must have a Gmail/Youtube linked Account. IF you used a Gmail account for B&N Registration you should use that one for this process.
You must either have dd (Linux) or WinImage (Windows) software.
You must have an external microSDCard reader or this will not work. Do NOT use the Nook Simple Touch.
You must have enough intelligence to follow instructions.
Let's get started:
Download TouchNooter from here: touchnooter-1-6-24.zip
Linux: Unzip and use dd if=touchnooter-1-6-24.img of=/dev/sdcard
Windows: Unzip and use WinImage to "Restore Virtual Hard Disk Image" to your SDcard.
Windows Alternative: https://launchpad.net/win32-image-writer/+download
Power off your Nook Simple Touch.
Insert TouchNooter SDcard into your Nook Simple Touch.
Power on your Nook Simple Touch.
You should see the screen "Rooted Forever".
It will boot like normal and you should be asked to select a launcher now. (If not use Button Savior to go home. This will bring up the launcher chooser.)
That was the hard part, now to the simple stuff.
Upon boot unlock your screen.
At the Android Welcome Screen skip Sign In.
Enable Location Services when given the option.
Connect to Wifi and launch Youtube from Go Launcher's App Drawer (Or the App Drawer of your Choice).
Click the Menu button (The right one in the middle of the status bar).
Select "My Channel" and Login using your Gmail Account.
Exit Youtube and Launch Gmail from "Extras".
Sync your Gmail Account and Exit. (If it fails to sync that is fine.)
Open up Market and Accept Terms and Service.
If you made it this far your nook should be successfully Rooted. Go Download an App to make sure.
Enable Non-Market Installs by running the NookColor Tools App.
If your Youtube fails to launch Uninstall and Reinstall Youtube from /data/app
Go to Settings > Device Info > SdCard > UnMount > Format
Thanks To:
Arnold Snarb - modified framework.jar
nemith - helping me figure out getting it to run at boot.
JesusFreke - For getting root.
MrMuffin - For the original Market Hack that we're using.
Currently Working On: TouchNooter 1.11.x
I've probably screwed up, but perhaps not too badly. Tried to follow all the steps and got the system files copied to media, and then to replace the main system files, but there I got confused. I ended up rebooting without attempting to install the youtube app, which I didn't find in the download. Even now, a lot looks like it is working, but I can't even attempt to sign in to google cause I can't get a keyboard to come up to allow me to enter my user name and password. Is there any help for me, or am I a total dunce needing to start over? thanks!
EDIT: I see I am screwed -- no keyboard is coming up for me anywhere. I guess I can go through a major reset but if anyone has a suggestion to just get the keyboard back I will appreciate it.
EDIT2: Well I got past that, simply chose multitouch keyboard instead of Gingerbread in NookColor Tools.
EDIT3: But now I am stuck again as I can't sign in to a google account... says can't establish a reliable data connection to the server, even though my wifi is fine. But at least at the moment everything else is fine, though the keyboard isn't working very well (but it does work; lots of ghosting)
An .img file is being uploaded for TouchNooter 1.6.20 It'll do all the copy and edit stuff, the only thing it can't do is create an android ID.
In the "GappsAndMore" there was some keyboards which were from the NC it was just a raw pull from AN. This is more refined with things that could cause issues removed. (Like Keyboards, Framework.jars from the NC, etc.)
william1853 said:
I've probably screwed up, but perhaps not too badly. Tried to follow all the steps and got the system files copied to media, and then to replace the main system files, but there I got confused. I ended up rebooting without attempting to install the youtube app, which I didn't find in the download. Even now, a lot looks like it is working, but I can't even attempt to sign in to google cause I can't get a keyboard to come up to allow me to enter my user name and password. Is there any help for me, or am I a total dunce needing to start over? thanks!
EDIT: I see I am screwed -- no keyboard is coming up for me anywhere. I guess I can go through a major reset but if anyone has a suggestion to just get the keyboard back I will appreciate it.
EDIT2: Well I got past that, simply chose multitouch keyboard instead of Gingerbread in NookColor Tools.
EDIT3: But now I am stuck again as I can't sign in to a google account... says can't establish a reliable data connection to the server, even though my wifi is fine. But at least at the moment everything else is fine, though the keyboard isn't working very well (but it does work; lots of ghosting)
Click to expand...
Click to collapse
I'd suggest a wipe and running TouchNooter... GappsAndMore had Keyboards and stuff in it and removed the stock keyboard =\
is a wipe in the nook touch holding down the power for 20 seconds?
No you need to do a complete wipe by triggering recovery, but I don't know how to trigger recovery yet.
oh well the perils of early adoption. I'll follow the thread with anticipation!
william1853 said:
oh well the perils of early adoption. I'll follow the thread with anticipation!
Click to expand...
Click to collapse
You could try 8 failed boots. Basically you power it on and then power it off before it fully boots. Do that 8 times and it might trigger recovery.
Confirmed this works great. I'm going to find a fix for the calendar.
GabrialDestruir said:
You could try 8 failed boots. Basically you power it on and then power it off before it fully boots. Do that 8 times and it might trigger recovery.
Click to expand...
Click to collapse
Recovery is holding the power button for 20+ seconds it will trigger recovery
xboxexpert said:
Recovery is holding the power button for 20+ seconds it will trigger recovery
Click to expand...
Click to collapse
Really? Is that from when it's off?
GabrialDestruir said:
Really? Is that from when it's off?
Click to expand...
Click to collapse
Not sure I have yet to try it but someone in the other thread said he called BN and they told him that and he did it.
xboxexpert said:
Not sure I have yet to try it but someone in the other thread said he called BN and they told him that and he did it.
Click to expand...
Click to collapse
I tried it and all I could get was it turning on and off
TouchNooter 1.6.20
This doesn't seem to work for me at all... I tried restoring the backup image and starting from scratch and it still will not work. I tried enabling Google Apps manually and it won't work for me either.
I think I'm done, if the 7th time wasn't the charm then I'm giving up for now...
MystaWright said:
This doesn't seem to work for me at all... I tried restoring the backup image and starting from scratch and it still will not work. I tried enabling Google Apps manually and it won't work for me either.
I think I'm done, if the 7th time wasn't the charm then I'm giving up for now...
Click to expand...
Click to collapse
I ran this on my Nook Touch and it worked just fine. Are you getting the "Rooted Forever" boot screen?
GabrialDestruir said:
I tried it and all I could get was it turning on and off
Click to expand...
Click to collapse
Didn't work for me either. 8 interrupted boots did.
i'm getting the rooted forever screen and then it just goes to the default stock home
any thoughts?
GabrialDestruir said:
I ran this on my Nook Touch and it worked just fine. Are you getting the "Rooted Forever" boot screen?
Click to expand...
Click to collapse
Same problem here... tried to return EVERYTHING to stock too.
yugoliang said:
i'm getting the rooted forever screen and then it just goes to the default stock home
any thoughts?
Click to expand...
Click to collapse
I did a reset of the device back to the out of the box experience, registered with my BN account, shut down and followed the directions to the letter. I had no luck at all. It just shows the Rooted Forever screen, then boots normally is if nothing happened.
Sorry Guys and Gals. Entirely my fault. It seems a combination of my own forgetfulness and bad scripting (I forgot proper codes and methods used in AN) caused this just to do nothing. I'm uploading a version as I'm typing this and will remove "BROKEN" from the title when it's up.
Still broken. init.rc isn't running it's script properly.
Script can be ran manually with:
Code:
adb shell sh /sdcard/nooter/tmp/scripts/Nooter
Will be working on getting it to trigger properly

[Q] Lock Screen Password Reset?

Hi All,
My 10 y.o. son changed the lockscreen password on his Kindle Fire 2 HD 7" and is now unable to access. He has used all but 2 of the allowed unlock attempts, and is now 2 tries away from an automatic factory reset. The device has all stock settings, has not been rooted nor any other modifications. I'm trying to figure out if there is anything I can do to crack/read/reset the lockscreen PIN / password with the device in its current state, or if a factory reset is the only option? The big issue is he does not want to lose his game save data. I work in IT, and am very comfortable with both Linux & Windows command line tools. Is it possible for me to access the files on his Kindle, or to perform root modifications while unable to get past the lock screen password? I have read many posts on this forum, but cannot find one which speaks to my specific situation. Thanks in advance for any replies!
danimal71 said:
Hi All,
My 10 y.o. son changed the lockscreen password on his Kindle Fire 2 HD 7" and is now unable to access. He has used all but 2 of the allowed unlock attempts, and is now 2 tries away from an automatic factory reset. The device has all stock settings, has not been rooted nor any other modifications. I'm trying to figure out if there is anything I can do to crack/read/reset the lockscreen PIN / password with the device in its current state, or if a factory reset is the only option? The big issue is he does not want to lose his game save data. I work in IT, and am very comfortable with both Linux & Windows command line tools. Is it possible for me to access the files on his Kindle, or to perform root modifications while unable to get past the lock screen password? I have read many posts on this forum, but cannot find one which speaks to my specific situation. Thanks in advance for any replies!
Click to expand...
Click to collapse
http://www.addictivetips.com/androi...e-pattern-unlock-on-android-via-adb-commands/
http://www.youtube.com/watch?v=SzdWc0ymtUU
Thanks for the link; I am not sure if USB Debugging / Enable ADB is enabled on this Kindle Fire HD device. If it is not, will this approach work? Since the lock screen password is unknown, I am not able to go into the device & check/modify this setting.
The YouTube video is not of practical use, since I am trying to avoid having to perform a factory reset.
danimal71 said:
Thanks for the link; I am not sure if USB Debugging / Enable ADB is enabled on this Kindle Fire HD device. If it is not, will this approach work? Since the lock screen password is unknown, I am not able to go into the device & check/modify this setting.
The YouTube video is not of practical use, since I am trying to avoid having to perform a factory reset.
Click to expand...
Click to collapse
No, the instructions there assume you have debugging enabled AND your computer is added to the list of authorized computers (on the device) to send adb commands. That's a nice little security feature Google added recently to prevent stolen devices from being hacked into
soupmagnet said:
No, the instructions there assume you have debugging enabled AND your computer is added to the list of authorized computers (on the device) to send adb commands. That's a nice little security feature Google added recently to prevent stolen devices from being hacked into
Click to expand...
Click to collapse
Thanks, so if I'm reading this correctly - if I am unable to connect via ADB, I have no option except for the factory reset? Am I able to root the device while the lock screen password is unknown, or would that process also be blocked to me? The factory reset is easy enough, and I know we can reinstall his games, apps, and books - but the big problem (for my son at least!) is that he will lose all of his Dragonvale progress save data!
I have a different approach on it that may be more complicated and I don't know the full method of doing this, but if u can flash twrp onto the recovery and the custom bootloader for kf2 (is it fff?) Then in twrp u could mount the partition, plug it into your pc, and copy the data folder for that game. But I am unfamiliar with the process for modifying the boot loader on kf2's since I don't have one. I know u could probably flash twrp from fastboot, but idk if the kf2 has be booted up with adb and root to install fff. Probably could force it into recovery by softbricking it but I don't suggest doing that from fastboot because it might hard brick if u flash a bad image for all I know. Only way I can think of safely getting it to soft brick and go into twrp is to get someone else with a rooted kf2 to do something like use adb to move their framework-res.apk to sdcard and then backup the system partition while the kindle is in a broken state and pull the backup, then put their framework back, chmod it and reboot and hand u the system image that's broken so u could flash it from fastboot. Usually when you do something like this the ki dle will go into recovery. Told ya my method was really complicated and well slightly risky.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
unlock lockscreen password
danimal71 said:
Hi All,
My 10 y.o. son changed the lockscreen password on his Kindle Fire 2 HD 7" and is now unable to access. He has used all but 2 of the allowed unlock attempts, and is now 2 tries away from an automatic factory reset. The device has all stock settings, has not been rooted nor any other modifications. I'm trying to figure out if there is anything I can do to crack/read/reset the lockscreen PIN / password with the device in its current state, or if a factory reset is the only option? The big issue is he does not want to lose his game save data. I work in IT, and am very comfortable with both Linux & Windows command line tools. Is it possible for me to access the files on his Kindle, or to perform root modifications while unable to get past the lock screen password? I have read many posts on this forum, but cannot find one which speaks to my specific situation. Thanks in advance for any replies!
Click to expand...
Click to collapse
As you are an IT experts, you may try to unlock your lock screen password with some free tool, such as Ophcrack. Also you can try other Windows Password Recovery tools to keep all data safe. I got this Youtube video: youtu.be/QyGptsC3VLg

Engineering Mode (no longer working)

There is a special secret dial code for invoking an extended Engineering Mode on the Oneplus 3:
*#36446337#
This opens up the menue of this extended EM.
It worked. But I screwed it up, so I cannot invoke it any more
I know, shame on me and all that stuff, this was totally my fault, as I played around with the apk, copied (not moved) it to the Download folder and tried to install it like a normal app.
Did not work.
But now also invoking the original extended EM no longer works ([email protected]).
I'd like to kindly ask the real experts among you:
1. What is it I screwed up with my stupid attempts to install this apk?
2. Is there any way to restore the information the dialer needs for parsing this secret code - other than performing a factory reset?
Or which is the information that got lost or overwritten?
3. All files in
/system/app/EngineeringMode
/system/app/EngSpecialTest
appear to have been unaffected.
(But could anyone please share the proper contents of these two folders, in case the extended EM works properly for him?)
4. Is there any way of invoking the extended EM directly working around doing it with the secret dialer code given above? e.g. by modifying the apk - admittedly in a more sophisticated way I attempted ?
I hope my question comes in the proper forum, don't want to cross-post it.
Thanks in advance!
Please Post Files as attachment or Link...
Would you be kind enough to post these files or a link to them? Unsure, but suspect a permissions issue or incorrect location of said files. I think you can connect to computer (with debugging enabled, & allowing access & allowing the rsa prompt also). You will need a command line/terminal depending on your desktop /laptop os. . I would say that you can use adb devices, then adb shell and finally am then the package name. Not sure how to format the activity manager command. Mayb am start - n xxx or am start xxx. Perhaps forum or Google can help. I kno that typing just am from the adb shell will list all possible options.

Rooting the LG Exalt LTE from Verizon (LG VN220) - Request for Advice

TL.DR; Trying to root new Verizon Android flip-phone with Marshmallow 6.0.1, ARMv7. Firmware version: VN22010B. Seems to to be locked down.
Click to expand...
Click to collapse
I'm trying to root the LG Exalt LTE, or LG VN220, from Verizon. Initially, I've attempted the common rooting kits, such as KingoRoot as well as the tools described around XDA. However all failed. I suspect the cause to be the restrictive permissions of /data/local/tmp, which prevents execution of binaries. I believe any kit using this location will likely fail to achieve anything.
As such, I've been looking to achieve the same using manual techniques. The first step, as in most rooting activity is to put the device into USB debugging mode. To do this on the VN220, first compose ##7764726220. When asked for a service code, use 000000 to access a special menu. Select the Developer Options > USB Debugging and select On. There is an additional menu below named Select USB configuration, from which you can select Media Transfer Protocol or RNDIS among other options.
With that done, you can verify that you can now communicate with the device via ADB. To do so, download the Minimal ADB and Fastboot bundle. While I was successful in querying the device with ADB with
Code:
adb devices
Trying to use fastboot simply outputs "< waiting for device >" indefinitively. It is also possible to open a shell using ADB, however attempting ADB with root will fail. I don't think this is caused by having wrong drivers, as all the other tools could detect the phone (see below), but rather a permission issue.
From there, I've try to boot in different modes, which are accessible by turning off the phone, and then powering up the device while holding the Volume Down button. This will boot into a white screen with some options, including the "Safe Mode" option which I attempted. The second mode is the "Firmware Upgrade" mode which is accessible by again, powering down the phone and powering it up again, but this time holding the Volume Up for 3 seconds.
Attempting to run the following fails:
Code:
fastboot oem unlock
That being said, I later found out that LG does provides a legitimate way to unlock the bootloader via their LG developer portal. Unfortunately the VN220 is not in the list of supported devices, nor does the procedure given applies to this phone. Additionally, it requires the device ID which fails also since it requires fastboot:
Code:
fastboot oem device-id
The other attempt I've tried is using the LG Mobile Support Too l and while it was useful to obtain the KDZ file from their website, it also failed to apply the update. LGUP didn't recognise the model. (Note that both requires the USB mode to be RNDIS to detect the phone)
Trying to run apps from the internal storage such as su or even using the chmod command only results in "Operation not permitted" messages. So even temporary root seems rather difficult.
At this point, I'd like to know if anyone has any advice on additional things I could try to root the phone, or even have temporary root.
Thanks in advance
@cyberrecce
Why?
First of all thank you, I've been looking for that service code to enable developer settings / adb since I discovered the phone secretly runs Android. But I don't see why we would need root, I've been using adb to side load apps since I can't get to a menu that allows it
jfn0802 said:
First of all thank you, I've been looking for that service code to enable developer settings / adb since I discovered the phone secretly runs Android. But I don't see why we would need root, I've been using adb to side load apps since I can't get to a menu that allows it
Click to expand...
Click to collapse
1. Why? To install a custom ROM.
2. Did you get any issue with certificates when side-loading apps? I keep getting INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES. Can't seem to find the "Install from Unknown Sources" option.
Same problem
InfectedPackets said:
1. Why? To install a custom ROM.
2. Did you get any issue with certificates when side-loading apps? I keep getting INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES. Can't seem to find the "Install from Unknown Sources" option.
Click to expand...
Click to collapse
i get the same error. did you find a solution? i would really appreciate it
InfectedPackets said:
1. Why? To install a custom ROM.
2. Did you get any issue with certificates when side-loading apps? I keep getting INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES. Can't seem to find the "Install from Unknown Sources" option.
Click to expand...
Click to collapse
MendilR said:
i get the same error. did you find a solution? i would really appreciate it
Click to expand...
Click to collapse
re: the certificate error for side loading apps...
Code:
adb shell settings put secure install_non_market_apps 1
turns off the unknown source block, but I'm still getting INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES
Could the apk itself I'm trying to use have a bad certificate? Or is there another solution?
InfectedPackets said:
I'm trying to root the LG Exalt LTE, or LG VN220, from Verizon. Initially, I've attempted the common rooting kits, such as KingoRoot as well as the tools described around XDA. However all failed. I suspect the cause to be the restrictive permissions of /data/local/tmp, which prevents execution of binaries. I believe any kit using this location will likely fail to achieve anything.
As such, I've been looking to achieve the same using manual techniques. The first step, as in most rooting activity is to put the device into USB debugging mode. To do this on the VN220, first compose ##7764726220. When asked for a service code, use 000000 to access a special menu. Select the Developer Options > USB Debugging and select On. There is an additional menu below named Select USB configuration, from which you can select Media Transfer Protocol or RNDIS among other options.
With that done, you can verify that you can now communicate with the device via ADB. To do so, download the Minimal ADB and Fastboot bundle. While I was successful in querying the device with ADB with
Code:
adb devices
Trying to use fastboot simply outputs "< waiting for device >" indefinitively. It is also possible to open a shell using ADB, however attempting ADB with root will fail. I don't think this is caused by having wrong drivers, as all the other tools could detect the phone (see below), but rather a permission issue.
From there, I've try to boot in different modes, which are accessible by turning off the phone, and then powering up the device while holding the Volume Down button. This will boot into a white screen with some options, including the "Safe Mode" option which I attempted. The second mode is the "Firmware Upgrade" mode which is accessible by again, powering down the phone and powering it up again, but this time holding the Volume Up for 3 seconds.
Attempting to run the following fails:
Code:
fastboot oem unlock
That being said, I later found out that LG does provides a legitimate way to unlock the bootloader via their LG developer portal. Unfortunately the VN220 is not in the list of supported devices, nor does the procedure given applies to this phone. Additionally, it requires the device ID which fails also since it requires fastboot:
Code:
fastboot oem device-id
The other attempt I've tried is using the LG Mobile Support Too l and while it was useful to obtain the KDZ file from their website, it also failed to apply the update. LGUP didn't recognise the model. (Note that both requires the USB mode to be RNDIS to detect the phone)
Trying to run apps from the internal storage such as su or even using the chmod command only results in "Operation not permitted" messages. So even temporary root seems rather difficult.
At this point, I'd like to know if anyone has any advice on additional things I could try to root the phone, or even have temporary root.
Thanks in advance
@cyberrecce
Click to expand...
Click to collapse
Just curious - any success or updates. I can't seem to get past " INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES"
For installing apps I'm still not getting past INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES
I even tried pulling an apk from my LG G4 that successfully installed on that device and tried installing it on the Exalt, but same error.
The biggest reason I've seen for the INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES is apks that are signed poorly. When I check the apks I'm using for their signatures with the JDK it says one or more of their signatures lack a timestamp which can cause problems.
Also, downloading the apk from the Exalt's browser and trying to install from either
settings > phone settings > storage > phone > explore > downloads > open > install
or
tools > file manager > internal storage > downloads > open > install
has been coming up with "app not installed" after it tries to install the apk.
I'm not really giving up though, I just don't really know where to go from here.
effulgent.unicorn said:
For installing apps I'm still not getting past INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES
I even tried pulling an apk from my LG G4 that successfully installed on that device and tried installing it on the Exalt, but same error.
The biggest reason I've seen for the INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES is apks that are signed poorly. When I check the apks I'm using for their signatures with the JDK it says one or more of their signatures lack a timestamp which can cause problems.
Also, downloading the apk from the Exalt's browser and trying to install from either
settings > phone settings > storage > phone > explore > downloads > open > install
or
tools > file manager > internal storage > downloads > open > install
has been coming up with "app not installed" after it tries to install the apk.
I'm not really giving up though, I just don't really know where to go from here.
Click to expand...
Click to collapse
Any ideas on how to get past - "INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES"?
PAULC91316 said:
Any ideas on how to get past - "INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES"?
Click to expand...
Click to collapse
I'm still at the same place I was the other day when I posted this.
effulgent.unicorn said:
For installing apps I'm still not getting past INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES
I even tried pulling an apk from my LG G4 that successfully installed on that device and tried installing it on the Exalt, but same error.
The biggest reason I've seen for the INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES is apks that are signed poorly. When I check the apks I'm using for their signatures with the JDK it says one or more of their signatures lack a timestamp which can cause problems.
Also, downloading the apk from the Exalt's browser and trying to install from either
settings > phone settings > storage > phone > explore > downloads > open > install
or
tools > file manager > internal storage > downloads > open > install
has been coming up with "app not installed" after it tries to install the apk.
I'm not really giving up though, I just don't really know where to go from
here.
Click to expand...
Click to collapse
InfectedPackets said:
The other attempt I've tried is using the LG Mobile Support Too l and while it was useful to obtain the KDZ file from their website, it also failed to apply the update. LGUP didn't recognise the model. (Note that both requires the USB mode to be RNDIS to detect the phone)
Click to expand...
Click to collapse
Can you please share with us the KDZ file?
Thanks!
anyone?
You will need to:
- unlock it’s Bootloader. If the “fastboot oem unlock” command will not work (and I’m quite sure it will not, since we’re talking about a USA LG device), you can stop here and throw the phone out the window.
- if by some any miracle you will be able to unlock the bootloader, you have two ways of rooting it:
1. Using TWRP and a superuser zip file (magisk or the now Chinese owned supersu). The main problem with this is that you will need to compile TWRP yourself, since I doubt anyone will bother for such an obscure device.
2. Using a prerooted boot image. You will need the stock boot image, install the latest magisk manager, let it root it and then flash it via fastboot. This is particularly difficult because you will need to decrypt the kdz file (if any available) in order to get the boot.img
Even if by a greater miracle you will be able to get 1 or 2 working, there still is a huge chance that the fastboot flash command will be disabled.
Forget about solutions like king/kingoroot. Best case scenario they will fail. Worst case scenario they will softbrick the phone by gaining temporary root and then modifying /system. That will in turn trigger dm-verity which will cause the soft brick.
Forget about the scams like oneclickroot. Their so called techs will try the aforementioned and fail and you will waste your $40.
Sorry To deliver the bad news, but there’s no way out of it.
Thanks for taking your time, to help me.
I will check if I can unlock the bootloader.
Thanks alot
r3w1NNNd said:
You will need to:
- unlock it’s Bootloader. If the “fastboot oem unlock” command will not work (and I’m quite sure it will not, since we’re talking about a USA LG device), you can stop here and throw the phone out the window.
- if by some any miracle you will be able to unlock the bootloader, you have two ways of rooting it:
1. Using TWRP and a superuser zip file (magisk or the now Chinese owned supersu). The main problem with this is that you will need to compile TWRP yourself, since I doubt anyone will bother for such an obscure device.
2. Using a prerooted boot image. You will need the stock boot image, install the latest magisk manager, let it root it and then flash it via fastboot. This is particularly difficult because you will need to decrypt the kdz file (if any available) in order to get the boot.img
Even if by a greater miracle you will be able to get 1 or 2 working, there still is a huge chance that the fastboot flash command will be disabled.
Forget about solutions like king/kingoroot. Best case scenario they will fail. Worst case scenario they will softbrick the phone by gaining temporary root and then modifying /system. That will in turn trigger dm-verity which will cause the soft brick.
Forget about the scams like oneclickroot. Their so called techs will try the aforementioned and fail and you will waste your $40.
Sorry To deliver the bad news, but there’s no way out of it.
Click to expand...
Click to collapse
Any sage advice on the [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES] issue when sideloading apps?
 @jfn0802 said they had success with sideloading, but haven't been online in ages, and none of the rest of us seem to have had the same success. Minimum, that's what I would like to accomplish.
[side note, has anyone switched from Verizon with this phone? I'm looking to, but I'm wondering a couple of things like, does verizon have the mobile hotspot function restricted from use on other carriers? & etc & just wondering how it's doing off-verizon for anyone.]
effulgent.unicorn said:
Any sage advice on the [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES] issue when sideloading apps?
@jfn0802 said they had success with sideloading, but haven't been online in ages, and none of the rest of us seem to have had the same success. Minimum, that's what I would like to accomplish.
[side note, has anyone switched from Verizon with this phone? I'm looking to, but I'm wondering a couple of things like, does verizon have the mobile hotspot function restricted from use on other carriers? & etc & just wondering how it's doing off-verizon for anyone.]
Click to expand...
Click to collapse
my freinds are using it in Canada with videotron and everything works, without unlocking
Just to add a clue what to look at, I think these devices are from Verizon and they are blocking anonymous apps from being installed
GenTech Solution said:
Just to add a clue what to look at, I think these devices are from Verizon and they are blocking anonymous apps from being installed
Click to expand...
Click to collapse
Yes right, but how can I go around it?
Ps. I was able to uninstall apps (I removed my Verizon)
With adb shell, as the user 0, but with adb normal uninstall didn't work, but when I try to install with adb shell, it gave the same certificate erorr
GenTech Solution said:
Just to add a clue what to look at, I think these devices are from Verizon and they are blocking anonymous apps from being installed
Click to expand...
Click to collapse
Isn't that what turning on the "install from unknown sources" option should do? I still get the Install Parse Failed after switching it on with ADB.
@98jbsz I've tried to uninstall without success. What way did you do it? And does it just leave a blank space in the menu screen?
[Less on topic, sorry again, but has anyone seen the LG Wine LTE? http://www.lg.com/us/cell-phones/lg-UN220-lg-wine
It's strikingly similar to our friend the Exalt LTE here, but it seems less carrier branded/available at US Cellular, so I'm wondering if that would make a difference?
Major differences Wine LTE has more 4G bands (2/4/5/12/25) versus Exalt (4/5/13), which kind of has me kicking myself, because travel and 4G was one of the reasons I bought the Exalt. Both have quadband GSM and WCDMA, but interestingly the Wine also has CDMA.
Beyond that, there are some more smaller differences I scavenged from their LG pages, Exalt has more bluetooth profiles, supports more music formats, has more GPS capabilities, wifi calling, and 1 more ringtone. Wine has more supported video formats, and an FM radio.
I'm curious about what/if the Wine would have for sms messaging (I doubt it'd have Verizon's message+) and instead of my Verizon app...]
98jbsz said:
Yes right, but how can I go around it?
Ps. I was able to uninstall apps (I removed my Verizon)
With adb shell, as the user 0, but with adb normal uninstall didn't work, but when I try to install with adb shell, it gave the same certificate erorr
Click to expand...
Click to collapse
Alright, I also managed to uninstall my verizon and verizon's cloud app using
Code:
adb shell and the pm uninstall -k --user 0
But the Verizon apps folder on the menu screen remains, although it's empty. Any ideas on how to remove it?
Then I tried to install an apk using
Code:
pm install
and it came back with [INSTALL_FAILED_INVALID_URI] which...is a different than [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES], but not better.
right, but when you first copy the APK to the phone, and then you install it, you will see the [INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES] error. still not a solution

Spyware of Phone

Hello,
I'm hoping that someone here will be able to help to do one or more of the following things:
1) Complete data recovery of Samsung Galaxy S9 snapdragon
2) Bypass pattern lock
A partner against whom I have a restraining order purchased this phone for me and I have since become aware that there is software installed on it which I cannot access which is recording my location, communications, etc.
All I installed is Mxplorer, OS Monitor, and Logcat, all of which were recommended by users on these forums and which were Google Play verified. When I started going through what I could access and recording the logs, my phone went crazy and a bunch of root files began to delete themselves. Now it is locked by a pattern and I never set a pattern.
Is it possible for me to bypass this pattern without deleting all the data on the phone, or to backup all the data on the phone including root files even if I cannot download the phone itself?
Alternatively, is anyone aware of any organization that would help me to examine the phone, as I do not feel that I have the technological ability to do so myself?
Also, I understand that the best thing to do for my own security is to use a different phone and to reset the passwords for all the accts that were saved on that phone from a different device and I am already doing that but it is very important to me to identify and preserve the spyware that was installed on this phone in order to 1) ensure the continuation of the restraining order 2) know what information he has had access to and 3) share the information that I find with organizations that are involved in combatting the development/sale/use of this kind of stalkerware.
Thank you.
PS C:\Users\Genevieve\Desktop\platform-tools_r30.0.5-windows (1)\platform-tools> .\adb shell
starqlteue:/ $ cd /data/data/com.android.providers.settings/databases
/system/bin/sh: cd: /data/data/com.android.providers.settings/databases: Permission denied
2|starqlteue:/ $
2|starqlteue:/ $
This is what I'm coming up against when I try to bypass the screen lock using adb, just for reference.
Permission denied on that path is not unusual, some devices simply don't support accessing that path over ADB. To delete that path, USB debugging needs to have already been enabled in the device's developer options so you can delete the gesture.key file and regain access. I've had a similar fight with an older Android device, trying to retrieve photos from a phone with an unlock pattern the owner had forgotten.
In the end I managed to gain access to the filesystem, but I had to do it through recovery mode by flashing an alternative recovery image to the device which bricked it for normal use.
I'd be surprised if this other person managed to install commercial spyware/malware without rooting the device, which would also give you access to that path.
That sort of 0day vuln is either darknet for $$$ (at which point, just wipe the cache partition, reflash the stock firmware and start from scratch) or nation state actor complexity.

Categories

Resources