Guys, I have got the OTA update for Micromax Canvas A1 last night. I have downloaded the whole update and then started installing it. But it got stopped in middle saying "Error occurred" and revert back to Lollipop again. I have repeated the process for 5-6 time. Still same result. Anyone knows solution for the same?
if u guys didn't get the update. go to settings->Apps->All-> open google service framework and thn force stop, disable and thn clear data. aftr thn enable it. now go to system updates in about phone. and check it will work. it worked for me.
Android 6 LMY48 build please try this idea
try this
Hello,if your phone is rooted,go to custom twrp recovery and take a full back up of your current rom .Then wipe cache,dalwik cache,system and data and flash your new stock rom
Build No. Problem
I hope your build no. Is LMY47V And u are ota update which can only performed with build no. LMY48M.
Please confirm your problem.
Related
The update showed up on my phone and so I updated it after unrooting my phone, removing lucky patcher, freedom, sd booster, and so on. After downloading the update, phone rebooted showed it was updating then Error. Rebooted the phone then the update was no longer there, tried using System update but to no avail.
My question is.. how do I fix this for me to be able to update to the latest?
I'm getting a similar problem. However instead of doing what you did to unroot and such, I flashed the 2.17 via their recovery and now I don't get the prompt for 2.18 update at all.
Its confusing as to why its acting like this :/
I already removed all root applications and unrooted the phone then did a factory reset but afterwards it put me to one of its old build and wont freakin update anymore.. Any help regarding this would be very much appreciated..
I am open to rooting and manually flashing the latest build.. Problem is, I was a Sony user whom just switched to zenfone.. So i have no idea how to or what to flash on our zenfone 2..
I started with unlocking bootloader using minimal ABD and fastboot. Once done my device went into bootloop.Then I download the stock frimware from sony's software called xperifirm which said that it is 15.5.A.1.5 but was 15.5.A.0.18.And wanted me to update using my laptop. tried doing that to but every time a error 12 came up.then i found someone's thread with .ftf file for 15.5.A.1.5 that to generic_IN. flashed it and then booted into it,got network working.then updated to CM13 and still it says sim card not detected.then flashed the same ftf file checked for software update and this is what i got:
Settings>about phone>bulid number:15.5.A.1.5
Update center>system::15.5.A.1.5 Ready to download 104.4MB
still downloaded it and tried to install.but,while installition when phone goes into recvery mode the screen stared blinking and the installition failed .then flashed cwm recovery and tried again but this is what comes up:
CWM-based Recovery v6.0.4.9
E:invalid command argument
Finding update package. . .
Opening update package. . .
Verifying update package. . .
E:footer is wrong
E:signature verification failed
Install Untrusted Package?
THIS CAN NOT BE UNDONE
- Yes - Install untrusted zip
E:Can't open /cache/recovery/fota/update_package(bad)
Installation aborted.
Rebooting. . .
Note:bold text is recovery log
pls someone help me out I want cm 13 with network working (only one sim working is ok for me but two will be better)
just the same problem
Hi,
I came here looking for a solution to this same problem. I have a C2004, and I have to admit I didn't really know what I was doing, but at this point I'm sure I've followed the right steps at least once. I only followed the official wiki.
I
- unlocked the bootloader
- flashed CM13
- booted, no GApps
- installed GApps (phone unusable due to popups)
- Re-flashed CM13 and GApps before first boot, phone works beautifully but I did all my tests without the SIM, when I rebooted to insert the SIM I noticed the phone was not detecting it. Eventually I found a post detailing what the problem was: CM13 required a previous Android 4.3, but my phone was on an older version.
So I downloaded the radio firmware and the image of the stock Sony OS on 4.3:
- wiped all data
- flashed radio firmware
- restored OS backup with CWM
- booted: SIM card is detected, no idea whether dual sim works because I'm not interested on it, GPS doesn't work
- wiped all data
- flashed CM13 again, still no network.
I repeated the above process several times, always get a working stock OS (except for GPS) but never got CM13 to connect to the mobile network. So, right now I'm stuck on that Sony OS, because it even detects an OS upgrade but can't install it because CWM doesn't know how to handle the upgrade package.
I'd like to know if it is possible to get a copy of the original recovery partition, so that official upgrade can be installed.
Or, better, to get CM13 working, somehow it seems my issue is not common because everything I find on the web points to the same above steps...
After installing CM13 , Did u flash the dual sim patch?
Steps :
First install a custom recovery,
then wipe/format everything
install cm13,dual sim patch and gapps(if u need) in one go because after that your recovery will be replaced by the cyanogenmod recovery and you will have to reinstall another recovery.
I don't know where, but I read that was not needed anymore, and that idea was fixed in my head. Maybe I mixed comments about the dual patch with comments about the radio patch, I can't recall at this point.
Anyway, patching that additional zip fixed the network access for me. Let's just see if its get fixed for the OP as well
Thanks!
You need to flash a patch for enabling dual sim, without it you will get no network ... This is because the official cyanogenmod gives no support for the xperia m dual and so an extra patch has to be flashed before you can really access the sim card's network! hope this helps ! so go on flash the cm13 and then the patch and share the results!!
Hello everyone
I have a lenovo vibe p1a42
When i bought this phone i was initially able to update without any problem til build no. S147_151288_ROW. But after that when i received notification of new update available, i downloaded it bt I cannot update it. I tried it several time. Every time it jist takes me to recovery mode, starts updating then at 24% it fails. I tried updating manually. I also tried using Lenovo Smart Assistant. But all of them give same result.
I am unable to uodate any furture. Can u tell me what should i do? I hear that this phone has now MM update too, bt i'm stuck.
Also, my phone has stopped vibrating. No vibration on anything. The vibration does works sometimes, bt again stops working in few min. I dont know whether this is software related or h/w prob. I will take it to service center if the problem doesnt solve on updating the os.
niranjand147 said:
Hello everyone
I have a lenovo vibe p1a42
When i bought this phone i was initially able to update without any problem til build no. S147_151288_ROW. But after that when i received notification of new update available, i downloaded it bt I cannot update it. I tried it several time. Every time it jist takes me to recovery mode, starts updating then at 24% it fails. I tried updating manually. I also tried using Lenovo Smart Assistant. But all of them give same result.
I am unable to uodate any furture. Can u tell me what should i do? I hear that this phone has now MM update too, bt i'm stuck.
Also, my phone has stopped vibrating. No vibration on anything. The vibration does works sometimes, bt again stops working in few min. I dont know whether this is software related or h/w prob. I will take it to service center if the problem doesnt solve on updating the os.
Click to expand...
Click to collapse
Hello,
Try upgrading your phone via QPST and not OTA
Good luck
dreigosh said:
Hello,
Try upgrading your phone via QPST and not OTA
Good luck
Click to expand...
Click to collapse
I wanted to try tht but i cannot find a link for s152 version file. I tried contacting lenovo through their official forum, they said bring it to service center. I think i ll just do that only. Since i anyway had to go there for my vibration problem.
BTW Thank you for reply.
Sent from my Lenovo P1a42 using XDA-Developers mobile app
niranjand147 said:
Hello everyone
I have a lenovo vibe p1a42
When i bought this phone i was initially able to update without any problem til build no. S147_151288_ROW. But after that when i received notification of new update available, i downloaded it bt I cannot update it. I tried it several time. Every time it jist takes me to recovery mode, starts updating then at 24% it fails. I tried updating manually. I also tried using Lenovo Smart Assistant. But all of them give same result.
I am unable to uodate any furture. Can u tell me what should i do? I hear that this phone has now MM update too, bt i'm stuck.
Also, my phone has stopped vibrating. No vibration on anything. The vibration does works sometimes, bt again stops working in few min. I dont know whether this is software related or h/w prob. I will take it to service center if the problem doesnt solve on updating the os.
Click to expand...
Click to collapse
I understand your pain.... lenovo OTA updates are very finicky. If you want marshmallow you can straightaway flash that ROM (the latest one is S285).
But please make sure to backup your data since this will definitely wipe all your data (same as factory reset). There is thread in on this forum which gives a fairly easy steps on flashing ROMs folr Vibe P1.
If you want to root your android 6.0 though, thats a different story.
Still have a look here - http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
You can flash ROM fairly easily from flashing steps mentioned in above thread. If you feel rooting steps are complex, you can still stay on unrooted rom, at least it will be the latest one.
HI,
I had been using the phone for the past 1 year. It was working fine. But, for past couple of months after the recent updates, everything went haywire.
I downloaded the last Android 10 ROM from sammobile and flashed it, it did not help too.
I am at a loss , can anyone please suggest anything.
Do I really need to flash the stack ROM , is that the only option I have ?
Hey all
I recived the miui 12.5 enchanced [ALIOTHEEAGlobal_V12.5.3.0.RKHEUXM] (2.9 GB & 466 MB) Update a few days ago via ota. My rom is stock - no root or custom Recovery. The download and installing process work fine, but then the Phone need to restart. While restarting the Phone stuck at poco Logo. Only with a few reboots (or leave it alone for a long time) the Phone comes alive again. Then there is the Info miui update failed after reboot. I also tried to Update manually the Full and increment Rom over the three dots menue. No Chance. Even if i install my current rom version [ALIOTHEEAGlobal_V12.5.3.0.RKHEUXM] again - the same problem
I searched the whole Internet and couldn't find someone with the same problem.
Please help.. Thank yo all!
FYI: I cannot do a full reset / wipe with data loss, because i have so much banking apps and accounts. I need a full day of restoring my current status and i don't have the time at the moment.
No one?
Hmm... I don't know if it possible with locked BL but try boot from B partitions? Are they for cases like this one, aren't they?
I dont know this option. How will this work?
I backed up my phone as good as possible und tried to flash with "XiaoMitTool V2" my currend rom and the 12.5.6.0 and it always endet in "miui sideload failed". WTF is here going wrong .. While sideloading it stops at 4.99% on phone screen.
Have you tried with 12.5.6 via stock recovery? (full rom ofc, not OTA). It doesn't erase your data.
I also tried ToolV2 with my F3 and no luck too.
isnt 12.5.6 eea enchanced? 12.5.3 is older update in eu
I tried to update through stock recovery and MIAssistant but no success. Like @crysus said, it stops to 4,99 on phone screen, no error but it boots to the old ROM. Maybe because is a stable beta version.
Mine updade went all good without hassles. I updated it via stock recovery but first I use 3 dots menu in system updater app just to show where update file is. (full recovery fw used, not just OTA).
The fastboot version of 12.5.6_EEA has been available for a few days now, it can be Flash with miflash.
Here the link:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com