Related
okay so i was trying to root my kindle fire and i didnt get su any where so then i tryed to install cwm and now its stuck at the yellow triangle and it wont go into recovery and it also will not connect to adb i need hellp ASAP
Install drivers as ADB composite with the Android SDK and then use this to change the bootmode
The link you posted is not working due to the period in the URL at the end.
Do not afraid. I have got the same experience Let God bless the search button
http://forum.xda-developers.com/showthread.php?t=1568340
unzip fbmode.zip
adb push fbmode /data/local/fbmode
adb shell chmod 755 /data/local/fbmode
adb shell /data/local/fbmode
adb reboot
Your kindle will "get stuck" on the kindle fire screen, but really it's just in fastboot mode.
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img
Your device will now boot into twrp recovery, and flash the firefirefire bootlaoder. When done it will prompt you to reboot. Upon reboot you will get stuck on the "yellow triangle" screen of firefire fire.
fastboot oem idme bootmode 5002
fastboot reboot
Click to expand...
Click to collapse
My kindle got the 6.3 update -solved!!
This has got to be one of the fastest ways I have rooted 6.3 kindle update
i went on line here http://liliputing.com/2012/03/root-...ogle-play-store-with-kindle-fire-utility.html
downloaded the new kindle fire utility and ckick on Install permanent root with super user. got rooted in about 2 minutes with no trouble at all
thanks everyone for your help but i solved it what i was doing was unsing the kindle fire utility trying to instal latest firefirefire but it just sat there and so i just went into the utility and reinstaled the twrp and it booted normal!!
Bricked Kindle
Okay, I'm not having the same issue, but I'm pretty sure I've completely, irevicalbly, bricked my kindle.
I know that I'm not in Fastboot mode, I've experienced that issue and solved it with the KFU.
Here's what I did:
I used the KFU to root my kindle. That worked fine. I was able to load all the Google apps (which was my initial goal). Then, I got greedy and decided that ICS was my next step - oops.
I followed the instructions on the following site:
androidauthority.com/kindle-fire-miui-4-ics-55853/
Note: I know, I'm an idiot - I should have paid attention to comments! UGH!
After I did this, I now only get the firefirefire logo and that is it. I can't load/reload TWRP and I can't change my bootmode to normal or recovery. The thing is, no matter which computer I plug the device into, the computer won't recognize the device. I get a message saying something "malfunctioned" when I plug it in. I've tried 3 different Windows machines (I've installed/reinstalled drivers I don't know how many times!) and I even tried loading Linux on a spare laptop and that didn't work either.
So, I tried the next thing I could think of. I followed the instructions on the following site:
ramble.karrth.com - Section "Troubleshooting TWRP
which involved removing the back cover, shorting a circuit (to force usbboot) and plugging my Kindle in. This didn't work for me either.
At this point, I'm willing to try anything. I'm not quite sure how to fix this issue. I think my next step is to either order a factory cable or make my own and try that, but if my bootloader is broke (truely broke) will that even work?
Please, if I should post this in another forum/place, just let me know. Any help appreciated!
I should also not that nothing comes up in my device manager. It does come up as a unrecognized USB bit goes away after telling me there was a malfunction.
ChrisKenison said:
I should also not that nothing comes up in my device manager. It does come up as a unrecognized USB bit goes away after telling me there was a malfunction.
Click to expand...
Click to collapse
If you get the yellow triangle logo to come up, then it's probably in fastboot mode. If you reboot it while it's connected to your computer and you get some device detection beeps from Windows, it's likely to be a driver issue. Look here...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
You might want to read the first post in that thread too.
Watch carefully as the device boots up and you get the yellow triangle logo. If that boot logo comes up and stays there, it's in fastboot. If the boot logo comes up, the screens blacks out, and then the boot logo comes back up (dimmer) then it's either trying to get into recovery or booting into the OS and failing.
I would try setting the bootmode to normal in KFU and when it says "<waiting for device>" reboot the Kindle Fire. Since you have FFF, the fastboot program on your computer will wait for the Kindle Fire's FFF bootloader to get into temporary fastboot and reset the bootmode when the KF is ready.
But, the computer won't even recognize there is a device connected to it
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
And because its not recognized in the device manger, kfu isn't picking it up
Sent from my Galaxy Nexus using xda premium
ChrisKenison said:
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
Click to expand...
Click to collapse
If you can't get the drivers working with the KFU distribution, you'll have a harder time with the SDK. They are the same drivers, but KFU has an updated, Kindle Fire specific .inf file for the driver and also installs the .ini file in the .android folder that you'll need. I don't know what you see in the device manager, but if you don't get one of the devices shown in the post I referred to earlier, I would try another Windows machine. You won't be able to do anything without getting it to detect your KF and load the proper drivers. If you are more adventurous, you could try pokey9000's Firekit (search for it) and try using linux to send it fastboot commands.
Yeah, that's my problem. I have tried 3 different windows machines (all windows 7) and, being the adventurous person i am I tried the Linux fix (removing back cover...) to no avail. All that did was make my kindle blink green. Not sure what that means either.
yea mine is stuck on the firefirefire boot screen
ChrisKenison said:
Yeah, that's my problem. I have tried 3 different windows machines (all windows 7) and, being the adventurous person i am I tried the Linux fix (removing back cover...) to no avail. All that did was make my kindle blink green. Not sure what that means either.
Click to expand...
Click to collapse
Well, if you can't get any of those scenarios to work out, maybe it's a hardware issue. It might be something as simple as a bad USB cable or something more serious within the KF itself. I've never had a problem with Windows or Linux not seeing the KF, so my hands on experience in this regard is limited... my KF has never been broken to that degree. I'm always curious to see what's going on with people's KF when they say nothing works, but my KF has never given me that opportunity.
ChrisKenison said:
I will have to try installing the drivers from the Android SDK... maybe that will turn up something. But, by installing the drivers from KFU, it doesn't work.
When I plug the device in, it beeps at me saying device is unrecognize and it couldn't install drivers because there was a malfunction. In the device manager (while that's happening) it shows up as an unrecognized usb device. Then, it goes away (the device doesn't stay in the device manager). Then, that whole thing happens again one more time. There isn't anything for me to update in the device manager... thoughts?
Click to expand...
Click to collapse
Sometimes in order to install the correct driver you need to delete the original from your computer because it will continue to attempt to revert to the default but beforehand try rebooting your computer and the kindle
---------- Post added at 07:41 PM ---------- Previous post was at 07:39 PM ----------
mistaanime said:
yea mine is stuck on the firefirefire boot screen
Click to expand...
Click to collapse
Run the kf utility again install twrp and fff again
So, Ive been searching for over 6 hours now and I really cant seem to root my kindle fire. I tried basically everything, and when things went wrong, I just deleted the files and started again. On my last try, I was able to fastboot it (at least I think so). When I ran KFU, ADB was online and Boot: 4002.
When I tried to root it always got stuck trying to find twrd.img. Then I tried option number 4, Installing Clockwork Recovery (because option number 3 was a dead end) and twrd.img was installed. But everytime something seemed to go right, the process wouldnt finish, it would just be <waiting for device>. I thought my problems would be over, so I tried to root it again. Now whenever I turn on the device, KFU is unable to locate my kindle, and it doenst appear on the device managing tab either. Even using the kindleunbrick.bat that worked for me the last times, it just gets stuck at <waiting for device>. ADB is offline and Boot: Unknown for now.
I really need to root my kindle because I dont live in America, so I dont have access to most stuff. I already changed the language when installing the driver, however, everytime I hooked my kindle up, a windows message would pop out saying that there was a problem with the driver, but when I went to device managing tab and tried to uptade the driver to "user\.android" it always came back as updated.
I am really noob at this, but I have read all the guides I found and something always went wrong. I hope someone can help me with this, please.
Thanks
Is your kindle turning on? If I could suggest you should put off anymore attempts to root your device till you know precisely what your doing and why. My biggest guess right now is your drivers are the greatest pitfall. You seriously don't want anything going wrong with them in the process of sending recoveries boot loaders or rooting you will end up with a really fancy paperweight. Privy to to attempting anymore you need to know that your drivers are functioning 100%.The fact that you pushed cwmr to your device after twrp should hurt a thing hopefully one should overwrite the other if all goes well . Since rooting is the primary goal go with that until you have verified root then recovery and bootloader can be done easily later with safer methods. Hold off awhile as long as your device will boot until you have found the knowledge and support to make it happen right. Start here http://forum.xda-developers.com/showthread.php?t=1552547 then go here http://forum.xda-developers.com/showthread.php?t=1638452 plan to use this method to root http://forum.xda-developers.com/showthread.php?t=1568340 ask a lot of questions don't be hasty or you will spend a lot of time trying to fix it instead of enjoying it.
As I said, I read all those guides already. I can use my kindle normally, but when I connect it to my computer, it is unrecognized. I tried every method I found to root, even though I just wanted to watch stuff and download a few games for my spare time(my intention was to watch stuff from premium features, but Im not really sure if root will allow me to do that from a foreign country*, so Im a little hesitant to extend premium).
I guess I wont try anything else for now because my main goal was reading, and this I can still do, but I am puzzled with the fact that I was unable to root it. Ill try to understand a bit more (hopefully with some tips). Thanks
*Geographical restrictions
OK well youve read the guides but in what you say it appears you are doing some of the wrong things why would you unbrick if your not bricked? Your drivers are your only issue as of this point but your methods are pushing you close to bricking your kindle. I would like to see you succeed in rooting your device and avoid bricking it.
---------- Post added at 11:59 PM ---------- Previous post was at 11:36 PM ----------
When your around we can try to get your drivers working
It would be nice to know what os your running on your computer. If you are on windows 7 use system restore to roll your computer back to a date before you started messing with the drivers or anything. Once it completes plug your kindle into your computer check to see if you can access the SD card contents and if it appears as a kindle in your device manager. Important now if all is good unplug your kindle and run the .bat file that comes with kfu. Then plug your kindle in let windows install the driver. Open up kfu find the tools folder shift plus right click select open command window here. Then type adb devices if its followed by a string of numbers this shows your kindle connected via adb . At this point you should obtain some help from some of the pros here at xda at fastboot and adb commands to safely root your kindle. If you decline and still wish to use kfu then only select install permenant root. If at any point in this process it fails and you loose adb connection do not unplug your kindle run the driver file again then recheck device status with kfu I believe its option 0 to see if your back online again. Pay attention to the dialogue that takes place in the kfu window you see verbatim that says failed or permission denied then quit after that. One important thing is you need to allow installation from unknown sources in the kindle settings on the kindle under device or it won't push the required files anyway.Wait to install twrp and fff until later there are easier safer methods. If your kindle hangs for a long time at the kindle fire logo select boot mode normal in kfu before unplugging. If at anytime kfu states waiting for device do not unplug it rather power it completely off then power it back on while connected .
---------- Post added at 01:53 AM ---------- Previous post was at 01:32 AM ----------
Just a side note I have rooted 4 different times with kfu without a single failure or mishap including the ones you are experiencing. I'm inclined to feel that relates mostly to your computer and drivers which makes kfu an unsafe approach for you I'm not responsible If you brick it!!!
I unbricked my device before I even came here, I tried an youtube tutorial and then it got stuck on the kindle fire logo, but after I unbricked it, it was fine. I know that something is going wrong, but Im following step-by-step the guides (at least I think so). As I said, everything was going correctly, ADB was online, Boot:4002, but when I tried to root it would be on an endless search for the file twrp.img, and after I succesfully downloaded it (I guess), my computer is unable to find my Kindle.
I run Windows 7, but it isnt properly activated (my room mate threw out the serial code), I dont know if this would interfeer in any way. When I conect the kindle, it appears to be in USB mode and says that I can transfer files, but my computer wont even find it. Ill try to restore my computer now and then Ill come back.
I know that doing this is my responsibility, but not being able to download apps is pretty annoying, so I have to keep trying.
If you can get adb status online then, why don't you install TWRP manually? Or use the "smirkit"?
Once you get recovery installed, you're set.
Also, be sure to "disconnect" from USB storage mode before trying to use adb commands or they won't work.
I dont even know how to use ADB comands. Is there anyway to make my computer recognize my kindle other then doing a system recovery? I dont know how to do that, and after searching, they say I need the CD (which I dont have).
Shift+right click your KFU "tools" folder and select "Open command window here"
From there, enter:
Code:
adb devices
If the output is something like:
Code:
List of devices connected
123456789ABCDEF
then you can install TWRP
http://forum.xda-developers.com/showpost.php?p=23747804&postcount=3
If the output is:
Code:
List of devices connected
(null)
then you need to reinstall your drivers
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Thank everyone that helped me, I managed it!
Actually I was doing everything right, but I guess the problem was my computer, because when my girlfriend came over I tried connecting it to her netbook and it recognized my kindle. I just downloaded the kfu, installed drivers, reconected kindle and let it update, ran KFU and selected option 2. All done now
I have no idea why this didnt work before, but at least now I can really enjoy my kindle.
Thanks again!
saybhausd said:
I dont even know how to use ADB comands. Is there anyway to make my computer recognize my kindle other then doing a system recovery? I dont know how to do that, and after searching, they say I need the CD (which I dont have).
Click to expand...
Click to collapse
Not system recovery bud system restore two different things go to accessories system tools system restore choose a date chose to restore to that point. System recovery is way way different. Glad you got it going
Ok, so let me preface this by apologizing if somehow the answer to my question is already lurking in the forums. I promise I have been looking for the better part of 3 hours and trying to figure this out on my own. My pride now hurts, and I have a headache. Please help me.
I was attempting to root my kindle fire, and put a custom rom onto it after getting jealous of my sister in law's samsung galaxy tab. I had previously done this back in april, but I decided to go back to the regular stock kindle fire (I think because netflix still wouldn't work otherwise at the time). I went to attempt and do basically exactly what I did in april with the newest version of KFU I could find here on xda, and attempted to install hash's jelly bean rom and gapps on it. I had made a back up restore point, but when I wiped stuff to get it all fresh, I must have wiped the restore. I couldn't get the jelly bean rom to work, it just stayed at the millions of triangles loading screen literally for like 30 minutes before I gave up. I decided to just go back to stock and forget about it. After putting the update.zip on the kindle and flashing it with TWRP, it boots up and just stays at the kindle fire logo, flashing every once in a while. When connected to KFU the ADB says online, but boot type says unknown. I tried to go into the boot type and tell it to go into different boot modes, and nothing changes. It just stays at the kindle fire loading screen, taunting me, laughing at me. I'm assuming that now my internal memory and SD card memory are both completely wiped and it's just got a bootloader or something and nothing else is there so it's in eternal start up mode with nothing to start up? I don't really know, and won't pretend to. I've taken a college level c++ intro to programming class (just finished it last week with an A-) and I've been a computer nerd for most of my life, so I'm not a toooootal noob, but I really have no experience with linux or anything other than playing around with ubuntu for like 4 days over the summer a few months ago. I'm currently downloading it and going to attempt to put it on a usb stick and boot into that so I can try and use soups application to see if that will help me, but I'm not even sure if that's what I need, and frankly I'm horrified to try and use linux for fear of screwing things up even more.
If my Kindle Fire is screwed, it's ok I suppose, but if there's a way I can fix it, I'd love to know.
Sorry for the wall of text, and thank you for any help that is offered. I'm almost to tears from the frustration and headache this has caused me, and you are much appreciated just for reading.
Cheers.
PS - I'm willing to give any screen shots, pictures, or anything else necessary to help diagnose the problem, just let me know.
favaron88 said:
Ok, so let me preface this by apologizing if somehow the answer to my question is already lurking in the forums. I promise I have been looking for the better part of 3 hours and trying to figure this out on my own. My pride now hurts, and I have a headache. Please help me.
I was attempting to root my kindle fire, and put a custom rom onto it after getting jealous of my sister in law's samsung galaxy tab. I had previously done this back in april, but I decided to go back to the regular stock kindle fire (I think because netflix still wouldn't work otherwise at the time). I went to attempt and do basically exactly what I did in april with the newest version of KFU I could find here on xda, and attempted to install hash's jelly bean rom and gapps on it. I had made a back up restore point, but when I wiped stuff to get it all fresh, I must have wiped the restore. I couldn't get the jelly bean rom to work, it just stayed at the millions of triangles loading screen literally for like 30 minutes before I gave up. I decided to just go back to stock and forget about it. After putting the update.zip on the kindle and flashing it with TWRP, it boots up and just stays at the kindle fire logo, flashing every once in a while. When connected to KFU the ADB says online, but boot type says unknown. I tried to go into the boot type and tell it to go into different boot modes, and nothing changes. It just stays at the kindle fire loading screen, taunting me, laughing at me. I'm assuming that now my internal memory and SD card memory are both completely wiped and it's just got a bootloader or something and nothing else is there so it's in eternal start up mode with nothing to start up? I don't really know, and won't pretend to. I've taken a college level c++ intro to programming class (just finished it last week with an A-) and I've been a computer nerd for most of my life, so I'm not a toooootal noob, but I really have no experience with linux or anything other than playing around with ubuntu for like 4 days over the summer a few months ago. I'm currently downloading it and going to attempt to put it on a usb stick and boot into that so I can try and use soups application to see if that will help me, but I'm not even sure if that's what I need, and frankly I'm horrified to try and use linux for fear of screwing things up even more.
If my Kindle Fire is screwed, it's ok I suppose, but if there's a way I can fix it, I'd love to know.
Sorry for the wall of text, and thank you for any help that is offered. I'm almost to tears from the frustration and headache this has caused me, and you are much appreciated just for reading.
Cheers.
PS - I'm willing to give any screen shots, pictures, or anything else necessary to help diagnose the problem, just let me know.
Click to expand...
Click to collapse
Do you have a bootloader installed? Can you boot into recovery?
Eaffon said:
Do you have a bootloader installed? Can you boot into recovery?
Click to expand...
Click to collapse
Nope, I'm pretty sure it wiped out anything I had when I tried to restore it to factory. I can no longer access TWRS and I have no FFF installed it seems. I literally can turn the kindle on, watch it sit at the kindle fire screen, and turn it off once that starts pissing me off. no amount of holding the power button or pushing it different ways gets me into TWRS or anything.
Did I answer your question or was that not what you were asking?
favaron88 said:
Nope, I'm pretty sure it wiped out anything I had when I tried to restore it to factory. I can no longer access TWRS and I have no FFF installed it seems. I literally can turn the kindle on, watch it sit at the kindle fire screen, and turn it off once that starts pissing me off. no amount of holding the power button or pushing it different ways gets me into TWRS or anything.
Did I answer your question or was that not what you were asking?
Click to expand...
Click to collapse
Hmm... Does it show up in device manager?
Dont throw it.. give it to me. Haha
After my sem I will have plenty of time to do all this stuff..
Sent from my SGH-T999 using xda premium
Eaffon said:
Hmm... Does it show up in device manager?
Click to expand...
Click to collapse
I've uploaded a screen shot of my device manager and in "devices and printers"
as you can see, it shows up as a kindle in devices and printers, and as an android phone in the device manager.
I also uploaded "My Computer" so you can see there is no access to it from there.
Okay.
See if you can issue fastboot or adb commands through command prompt. Navigate to your .android folder and type fastboot devices and adb devices and tell me what shows up.
Eaffon said:
See if you can issue fastboot or adb commands through command prompt. Navigate to your .android folder and type fastboot devices and adb devices and tell me what shows up.
Click to expand...
Click to collapse
I'll be honest, I'm not too good with command prompt... Is the .android folder going to be on the Kindle itself? once i get in that directory do I literally just type "fastboot devices" and "adb devies" or is there a command associated with that?
favaron88 said:
I'll be honest, I'm not too good with command prompt... Is the .android folder going to be on the Kindle itself? once i get in that directory do I literally just type "fastboot devices" and "adb devies" or is there a command associated with that?
Click to expand...
Click to collapse
should be in C:\Username\.android if its not there you can copy the files over from KFU. Its in the tools folder of KFU so you can just point command prompt there and then issue the command.
Eaffon said:
should be in C:\Username\.android if its not there you can copy the files over from KFU. Its in the tools folder of KFU so you can just point command prompt there and then issue the command.
Click to expand...
Click to collapse
alright, I found it and tried those commands and this is what I got.
favaron88 said:
alright, I found it and tried those commands and this is what I got.
Click to expand...
Click to collapse
I cant see the picture, but you need to cd to the files.
ex "cd C"\Users\Jimmy\Desktop\KFU\tools\" then issue the commands.
Eaffon said:
I cant see the picture, but you need to cd to the files.
ex "cd C"\Users\Jimmy\Desktop\KFU\tools\" then issue the commands.
Click to expand...
Click to collapse
Ok, nothing happened with I typed fastboot devices, but when I did adb devices it said
*daemon not running. starting it now*
*daemon started successfully*
List of devices attached
06B6002600000001 device.
image is attached. (Are you not able to see any of them/ is it not helping to upload screen captures? I'm just trying to be as easy to help as possible.)
You could try my prefab ISO soupkit is already ran on it and it has teamviewer installed for assistance measures you can find it here post 7 http://forum.xda-developers.com/showthread.php?t=1413358 but what I think you will need is a factory cable found here ultimately post 9 http://forum.xda-developers.com/showthread.php?t=1392693 . The system is trying to run that's why it comes up android composite adb interface, its busy trying to handle the data that you failed to wipe prior to flashing jelly bean and then stock. You could also see if if will allow you to send twrp and fff back to the device with kfu then enter recovery wipe and reflash another ROM.
Okay we need to get it to boot into fastboot. Change the bootmode to fastboot in kfu so we can push recovery/fff
Sent from my Amazon Kindle Fire using xda app-developers app
It's totally fixable.
Thepooch is right. My brother had the same problem with his son's. Just get into fastboot and flash a bootloader and twrp and youre set
Sent from my Amazon Kindle Fire using xda app-developers app
Thepooch said:
It's totally fixable.
Click to expand...
Click to collapse
Awesome
Also I didn't want you to think I ignored your post. I just finished making the usb drive with ubuntu on it and was going to attempt your solution in the other thread if whatever we were trying here doesn't work.
I appreciate y'alls help very much.
Eaffon said:
Okay we need to get it to boot into fastboot. Change the bootmode to fastboot in kfu so we can push recovery/fff
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Ok I loaded KFU and told went and told it to boot in fastboot, it said that it told the device to do it, but it still says Boot Status: Unknown.
Is this a problem or do we know that it's booting in fastmode now? I'm just not sure how to tell if it was successful since it's not giving me the code.
(Ps - I originally posted this before my previous post thanking you guys, but then came back to this window to see that I had screwed up the Captcha, but it wouldn't let me post for 5 more minutes since I'm a new user. Sorry for the wait.)
Its very common for the boot mode to be unknown in fast boot. Try to send twrp with kfu if it says waiting for device for a long time simply power it off while connected then back on it should then pick up and send twrp. If need be do the same thing with the bootloader just wait longer a failed bootloader flash is far worse than the situation your in.
favaron88 said:
Ok, nothing happened with I typed fastboot devices, but when I did adb devices it said
*daemon not running. starting it now*
*daemon started successfully*
List of devices attached
06B6002600000001 device.
image is attached. (Are you not able to see any of them/ is it not helping to upload screen captures? I'm just trying to be as easy to help as possible.)
Click to expand...
Click to collapse
ADB is connected, therefore you are not in fastboot. The Kindle Fire logo you see is actually the stock boot animation. The difference is whether or not it changes in brightness at any point (obviously it does).
You need access to recovery to fix your problem and you need the ability to change bootmodes to get into recovery. Without a working shell you need access to fastboot to change bootmodes.
Unfortunately, in many situations like yours, there is no working shell to change the bootmode. To confirm this, try to launch the shell by entering "adb shell", respectively.
If you receive an error, your only options are to get a factory cable (recommended) or open the device so you can put it in USBboot via the shorting trick and the use of Firekit (not so recommended).
With access to fastboot, you can change your bootmode to recovery or reinstall a custom recovery if necessary. In recovery, the "fix" is as simple as reinstalling a ROM.
"That's a special kind of stupid. The kind that makes me laugh."
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
farkuldi said:
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
Click to expand...
Click to collapse
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Socially Uncensored said:
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Click to expand...
Click to collapse
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
farkuldi said:
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
Click to expand...
Click to collapse
The unbrick program didn't work. It just stayed there t <waiting for device>. How can I use the fastboot cable to fix it?
Thanks.
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
ezproxy said:
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
Click to expand...
Click to collapse
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
farkuldi said:
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
Click to expand...
Click to collapse
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
ezproxy said:
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
Click to expand...
Click to collapse
I'd say you didn't read the previous posts.
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
farkuldi said:
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
Click to expand...
Click to collapse
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Socially Uncensored said:
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Click to expand...
Click to collapse
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Gon Rouge said:
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Click to expand...
Click to collapse
post in correct forum
Fire Index: Which Amazon (Kindle) Fire Do I have?
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
jerry777888 said:
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
Click to expand...
Click to collapse
Repost what?
Sent from my ocean using XDA Labs
Ok, So I am extremely stupid. I installed TWRP, and I clicked on the botton which says "Delete /System", So after that, It seems that when booting up, It displays the Kindle Logo, and that is it. Literally. And when I tries to unbrick it, none of the tools recognize it. I tried FastBoot cables, no luck. And now, the computer seems to recognize it in ADB, but it never able to push back the new bootloader and system file back, just says "Permission Denied", And when I tries to use Shell, it says "./system/./sh: File Does Not Exist"(Since the whole /system folder is gone...)... Does anyone know how to fix this? I'm willing to pay $10-40 for anybody that came up with a solution that works. Thanks. I am trying to fix this for a long time now, And I really don't know what to do at this point. I tried to access TWRP, but it doesn't seems to work anymore.
And I am not sure if this helps, but it is a Kindle Fire 1st generation. It have been lying in a corner of the house for a couple of years now, and I just never been able to fix it,