Hello guys. i´m from portugal. i bought a P8000, I insert the sim card and when i turn on the phone, he does not have network signal.....Can you help me? do i need to configure something?
Thanks
You get it to work ?
buen día compre un elephone p8000 y no agarra red, simplemente dice sin servicio, que puedo hacer??
Did it come like that from factory?! Or did you install anything on it before trying?
My guesses would be that either you have a faulty device, or you have a faulty SIM. Try using a different SIM on it!!
If you installed anything on it (like a ROM, for example), I would try reflashing from scratch.
Regards.
that have version a and b ,,,you make sure that device version work with your carrier
ANARKI1 said:
Hello guys. i´m from portugal. i bought a P8000, I insert the sim card and when i turn on the phone, he does not have network signal.....Can you help me? do i need to configure something?
Thanks
Click to expand...
Click to collapse
if you just insert the sim and turn it on . the mobile data cant work.. you have to enable mobile data in settings/data usage/ your provider / enable mobile data!
and look at your baseband. does it say something with .......p10 at the end? (settings/info)
if yes i can provide you a solution
---------- Post added at 10:23 AM ---------- Previous post was at 10:14 AM ----------
yuwai said:
that have version a and b ,,,you make sure that device version work with your carrier
Click to expand...
Click to collapse
you have a pm . check you inbox
Won't connect to mobile network!!! Baseband version ends P 10 any ideas please!! HELP
Phone arrived but will not connect to any network, it recognizes that the SIM is there but does not connect. Baseband version ends P10, has anyone got any ideas please!!
Dougie.J. said:
Phone arrived but will not connect to any network, it recognizes that the SIM is there but does not connect. Baseband version ends P10, has anyone got any ideas please!!
Click to expand...
Click to collapse
flash my eragon rom and it will be fine
I have a similar issue and have tried the Eragon ROM (and other stock ROMS) - none of which solve the problem.
Some screenshots to show what is going on. The SIM is fine in another phone. Other working SIMS do the same in this P8000.
Really need some help with this. It was all working perfectly up until the recent OTA and a factory reset.
Cooperuk said:
I have a similar issue and have tried the Eragon ROM (and other stock ROMS) - none of which solve the problem.
Some screenshots to show what is going on. The SIM is fine in another phone. Other working SIMS do the same in this P8000.
Really need some help with this. It was all working perfectly up until the recent OTA and a factory reset.
Click to expand...
Click to collapse
Your.imei is Working?
Check it please. If not you have to restore it . there are many guides out here for that with mtk engineering tool
Gesendet von meinem P8000 mit Tapatalk
Hi Skeleton1911
IMEI is all working as far as I know - they are both in there and RADIO is on.
Any other ideas?
Cooperuk said:
Hi Skeleton1911
IMEI is all working as far as I know - they are both in there and RADIO is on.
Any other ideas?
Click to expand...
Click to collapse
Okay. Use.flashtools and flash a previous stock version.
All you need is here in this 4 posts
http://forum.xda-developers.com/ele...ine-install-mtk-drivers-t3334698/post65791437
Gesendet von meinem P8000 mit Tapatalk
Hi,
I've tried that already and it did not work. I may have killed the NVRAM.bin in doing so. Would that give me this problem?
Thanks.
Cooperuk said:
Hi,
I've tried that already and it did not work. I may have killed the NVRAM.bin in doing so. Would that give me this problem?
Thanks.
Click to expand...
Click to collapse
Yes. If the nvram is killed you need to restore your imei via engineering mode
Gesendet von meinem P8000 mit Tapatalk
IMEI have been restored via engineering mode - still can't get a mobile signal - it finds networks, but will not connect.
---------- Post added at 11:18 AM ---------- Previous post was at 11:01 AM ----------
When the IMEI are back in place, does that mean that the NVRAM is back to normal?
Cooperuk said:
IMEI have been restored via engineering mode - still can't get a mobile signal - it finds networks, but will not connect.
---------- Post added at 11:18 AM ---------- Previous post was at 11:01 AM ----------
When the IMEI are back in place, does that mean that the NVRAM is back to normal?
Click to expand...
Click to collapse
Yes ..should be.
Have you rebooted after you restored?
Gesendet von meinem P8000 mit Tapatalk
Yep - rebooted and then rechecked using engineer mode to make sure that the IMEI were still there. They are there, but I get no connection to the mobile network. It finds the network but I get the "Can't connect to the network right now. Try again later." message
Cooperuk said:
Yep - rebooted and then rechecked using engineer mode to make sure that the IMEI were still there. They are there, but I get no connection to the mobile network. It finds the network but I get the "Can't connect to the network right now. Try again later." message
Click to expand...
Click to collapse
Flash 20150715 stock ROM now.
That should work.
You will find the link to it in my guideline...
Gesendet von meinem P8000 mit Tapatalk
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
Cooperuk said:
Yep - rebooted and then rechecked using engineer mode to make sure that the IMEI were still there. They are there, but I get no connection to the mobile network. It finds the network but I get the "Can't connect to the network right now. Try again later." message
Click to expand...
Click to collapse
Flash 20150715 stock ROM.
You will find the link to it in my guideline
Gesendet von meinem P8000 mit Tapatalk
I will give it a go. I'll let you know what happens.
---------- Post added at 12:01 PM ---------- Previous post was at 11:56 AM ----------
Did you mean 20150725 instead of 20150715?
Cooperuk said:
I will give it a go. I'll let you know what happens.
---------- Post added at 12:01 PM ---------- Previous post was at 11:56 AM ----------
Did you mean 20150725 instead of 20150715?
Click to expand...
Click to collapse
Yes. Sry typo..
Gesendet von meinem P8000 mit Tapatalk
Related
Hello,
I've just received my Zenfone (ASUS_Z00AD) bought on Gearbest
It is full stock, I did not anything...for now !
My problem is that when I tap on the icon tu update (a kind of cloud with an arrow going down) I got the message '' DMClient has stopped" !!!
What could I do ?
Do you think I should root, flash a custom recovery and flash a new ROM ?
How can I know if it is a CN or WW ROM ?
Thanks for all m8
Check your about/software information, what current Rom are you running? Also in software version, make sure you turn on USB debugging, if you have play store is likely a we Rom but likely the Chinese version of phone. Post version you are on here.
Sent from my ASUS_Z00AD using Tapatalk
jimchee said:
Check your about/software information, what current Rom are you running? Also in software version, make sure you turn on USB debugging, if you have play store is likely a we Rom but likely the Chinese version of phone. Post version you are on here.
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Yes, I have playstore
here is my Rom version http://hpics.li/c545f90
Didn't get the img
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 03:58 PM ---------- Previous post was at 03:57 PM ----------
That was weird, I didn't get the image and it didn't show here on my phone
Sent from my ASUS_Z00AD using Tapatalk
That Rom version is for 551, Z00A IS 551 Z008 IS 550
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 12:33 AM ---------- Previous post was at 12:24 AM ----------
That is very old Rom, you should be able to able to flash the full .59 Rom straight to it by downloading the full Rom and placing it in root of internal storage, turning off, then booting to fastboot and then booting to recovery and it will apply the update.
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 12:36 AM ---------- Previous post was at 12:33 AM ----------
Link for the full Rom is located in ZenFone general thread under the title new Rom tonight, read through the thread till you see the link for the full rom
Sent from my ASUS_Z00AD using Tapatalk
Thx a lot, I m gonna try this and tell you...thx
;; it did it, downloaded, placed on a card, reboot recovery ...
It started to update but then, update error ....and stop ....
Hi, me again..
My bootloader is à CN one..but m'y ROM is à WW...
Can I flash à WW bootloader for me to get OTA ?
Hello, maybe anybody here can help me...
I have a Microsoft Miracast-Display-Adapter connected with my LG TV which worked perfectly on offical p600 KitKat 4.4.2 Rom (unrooted), but I don't find a way to use it with other Roms. It doesn't work on Hyperdrive KK 5.1 Rom (after clicking on Screen Mirroring the window closes), on Temaseks cm 12.1 Rom (it starts to connect, but then fail) and even with the official Lollipop 5.1.1 release (rooted) by Samsung I get the message, that there is a hardware problem.
I'am very frustrated and now I went back to cm 12.1 by temasek.
Someone wrote in a forum that it could depending on Knox, but on cm it also won't work.
Is it maybe a general problem by Lollipop?
Has anybody the same problem with his p600?
No, i think the problem is caused for the custom recovery.
Anyone knows if i change the custom recovery for the original one, make me loose the root ?
Enviado desde mi SM-P600 mediante Tapatalk
Thanks, but i found a solution for the screen mirroring problem just before 5 hours.^^
It is a general bug with rooted samsung devices.
I had to change something in the system folder and now everything works perfectly.
Here is a video tutorial to fix this problem: https://m.youtube.com/watch?v=A0JqRf6sygM
Can you say me these instruccions?
Enviado desde mi SM-P600 mediante Tapatalk
---------- Post added at 06:07 PM ---------- Previous post was at 05:39 PM ----------
Thanks for the video
Enviado desde mi SM-P600 mediante Tapatalk
---------- Post added at 06:53 PM ---------- Previous post was at 06:07 PM ----------
Stogie87 said:
Thanks, but i found a solution for the screen mirroring problem just before 5 hours.^^
It is a general bug with rooted samsung devices.
I had to change something in the system folder and now everything works perfectly.
Here is a videotutorial to fix this problem: https://m.youtube.com/watch?v=A0JqRf6sygM
Click to expand...
Click to collapse
Thanks, it was successful, you don't know how many hours i lose looking for this.
Enviado desde mi SM-P600 mediante Tapatalk
Any developer working on Marshmallow for Note 2? Just curious to understand the what and when. Has anyone tried it already? Would love getting my hands dirty on it
Hello and thanks for note 2 discussion.
Its the Android 6 for not 2 her ?
The best kernel for Android 6 ?
Besteht thanks
Gesendet von meinem GT-I9300 mit Tapatalk
no replies so far, so I doubt if anyone is really working on it
ok sorry. do not want false, kernel install. want to hurt handy not make defective.
Gesendet von meinem GT-I9300 mit Tapatalk
CrazyDude009 said:
no replies so far, so I doubt if anyone is really working on it
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-note-2/orig-development/rom-cyanogenmod-13-0-n7100-t3267758
you blind or what?
browse the forum instead waiting for a reply here
tilak build,download link in comment
https://plus.google.com/108321221872633034471/posts/PrcWJeMHeRB
RR team, no build release yet but here the discussion
https://plus.google.com/108029663688984173146/posts/byKBptkBhRw
sora9009 said:
http://forum.xda-developers.com/galaxy-note-2/orig-development/rom-cyanogenmod-13-0-n7100-t3267758
you blind or what?
browse the forum instead waiting for a reply here
Click to expand...
Click to collapse
Thank you Sora for giving me the "line of sight"
Had searched when I started this topic and found none. Should have searched now nevertheless.
Any other CM13 based ROM out there for N7100?
what you have for kernel for android. 6 what is the best kernel
Gesendet von meinem GT-I9300 mit Tapatalk
CrazyDude009 said:
Thank you Sora for giving me the "line of sight"
Had searched when I started this topic and found none. Should have searched now nevertheless.
Any other CM13 based ROM out there for N7100?
Click to expand...
Click to collapse
already edit above post with new link
---------- Post added at 12:04 AM ---------- Previous post was at 12:00 AM ----------
alex16021973 said:
what you have for kernel for android. 6 what is the best kernel
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
only agni available for custom kernel...and of course stock is the best
sora9009 said:
already edit above post with new link
Click to expand...
Click to collapse
You're awesome! Thank you!
Will follow these threads over the next few days and go marshmallow when something looks stable. Any personal recommendations?
CrazyDude009 said:
You're awesome! Thank you!
Will follow these threads over the next few days and go marshmallow when something looks stable. Any personal recommendations?
Click to expand...
Click to collapse
ivan build is pretty good for daily use..just little sd card issue
Sora9009
Best thanks.
Is tis for cm13 ?
Best thanks for tis info.
Gesendet von meinem GT-I9300 mit Tapatalk
alex16021973 said:
Sora9009
Best thanks.
Is tis for cm13 ?
Best thanks for tis info.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
yup..agni support cm13
Best THX ??
Gesendet von meinem GT-I9300 mit Tapatalk
sora9009 said:
http://forum.xda-developers.com/galaxy-note-2/orig-development/rom-cyanogenmod-13-0-n7100-t3267758
you blind or what?
browse the forum instead waiting for a reply here
tilak build,download link in comment
https://plus.google.com/108321221872633034471/posts/PrcWJeMHeRB
RR team, no build release yet but here the discussion
https://plus.google.com/108029663688984173146/posts/byKBptkBhRw
Click to expand...
Click to collapse
THanks for the info
I still don't get it why CyanogenMod released CM13 for S3 and doesn't care about Note 2. International model of Note 2, GT-N7100 to be more exactly, has only CM11 while other versions, like t0lte got CM12.1.Same for Sprint and Verizon, both have CM12.1.
Now, CM11 works good. Trust me. I used for 2 weeks and I've got NO bugs. Nothing! Smooth and stable.
And that was about system stability. Anyway, there is one problem with the graphics. There is a little bit of video tearing sometimes, when closing and opening apps.
I really wish to see at least CM12.1 in these days from CyanogenMod. There were no updates for more than a week. Galaxy S3 got like 5 CM13 updates in one week.
I'm not sure who is in charge of Samsung development there, but he or she should focus on all devices, not only on a few.
The head developer or Note 2 left for Sony. I just hope someone else will take hes job.
---------- Post added at 12:08 PM ---------- Previous post was at 12:05 PM ----------
CM11 does not work with Xposed for it's SDK level is only 19. Just so you know
Tell me please .....if I have 12.1 and I want to install 13....I need to do any wipes or not?
Red3k said:
Tell me please .....if I have 12.1 and I want to install 13....I need to do any wipes or not?
Click to expand...
Click to collapse
Yes you need to Wipe Cache, System and Data
RR rom released
CrazyDude009 said:
Any developer working on Marshmallow for Note 2? Just curious to understand the what and when. Has anyone tried it already? Would love getting my hands dirty on it
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...emix-5-6-0-t3278709/post64487493#post64487493
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
kgshank said:
THanks for the info
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...emix-5-6-0-t3278709/post64487493#post64487493
---------- Post added at 06:42 PM ---------- Previous post was at 06:39 PM ----------
alex16021973 said:
Hello and thanks for note 2 discussion.
Its the Android 6 for not 2 her ?
The best kernel for Android 6 ?
Besteht thanks
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-note-2/development/rom-resurrection-remix-5-6-0-t3278709
---------- Post added at 06:54 PM ---------- Previous post was at 06:42 PM ----------
alex16021973 said:
Sora9009
Best thanks.
Is tis for cm13 ?
Best thanks for tis info.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-note-2/development/rom-resurrection-remix-5-6-0-t3278709
---------- Post added at 06:57 PM ---------- Previous post was at 06:54 PM ----------
Red3k said:
Tell me please .....if I have 12.1 and I want to install 13....I need to do any wipes or not?
Click to expand...
Click to collapse
Wipes always needed, but here you will be needing to do a clean Flash
---------- Post added at 07:00 PM ---------- Previous post was at 06:57 PM ----------
Best Kernel for Note 2 is Agni Kernel
Thanks will give a try
hibin.m said:
http://forum.xda-developers.com/gal...emix-5-6-0-t3278709/post64487493#post64487493
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
http://forum.xda-developers.com/gal...emix-5-6-0-t3278709/post64487493#post64487493
---------- Post added at 06:42 PM ---------- Previous post was at 06:39 PM ----------
http://forum.xda-developers.com/galaxy-note-2/development/rom-resurrection-remix-5-6-0-t3278709
---------- Post added at 06:54 PM ---------- Previous post was at 06:42 PM ----------
http://forum.xda-developers.com/galaxy-note-2/development/rom-resurrection-remix-5-6-0-t3278709
---------- Post added at 06:57 PM ---------- Previous post was at 06:54 PM ----------
Wipes always needed, but here you will be needing to do a clean Flash
---------- Post added at 07:00 PM ---------- Previous post was at 06:57 PM ----------
Best Kernel for Note 2 is Agni Kernel
Click to expand...
Click to collapse
Turbo Editor and Es Explorer (Es editor) don't save edited txt file (premission denied). How fix?
Standart CM editor open and save text files normally.
CM13 build 4 (by Ivan) without Gapps
Like if I take the modem of the Sprint GS6 and the Kernel and add them to the rom of the international version, would it work?
I'm very sorry for the nooby question, I'm just trying to learn a few things.
djpabz23 said:
Like if I take the modem of the Sprint GS6 and the Kernel and add them to the rom of the international version, would it work?
I'm very sorry for the nooby question, I'm just trying to learn a few things.
Click to expand...
Click to collapse
No. At best, if you flash a S6 Sprint kernel, it will work, but with no data.
todivefor said:
No. At best, if you flash a S6 Sprint kernel, it will work, but with no data.
Click to expand...
Click to collapse
Bummer, thanks for your reply. Appreciate ir
Sent from my SM-G920P using Tapatalk
It is possible, you need to use like Uninkernel and replace some files from a International R0M with ones from a Sprint ROM.
1619415 said:
It is possible, you need to use like Uninkernel and replace some files from a International R0M with ones from a Sprint ROM.
Click to expand...
Click to collapse
I don't think anyone has successfully used any of the international Roms. one of the devs told me it had to do with how much more different the source code is on the Sprint model.
southernstyle said:
I don't think anyone has successfully used any of the international Roms. one of the devs told me it had to do with how much more different the source code is on the Sprint model.
Click to expand...
Click to collapse
I used to do it when I had my Sprint LG G3, it worked really well its just a matter of finding a model with similar Wifi Chips, Bluetooth Chips, etc
I may work on it actually, if anyone wants to help message me
When I messed with international ROMs on my S5, I kept having issues with Phone force closing and everything data/phone related force closing. I never followed the logcat but I think I gave up because it required fixing a lot of smali code in the framework.jar which.. screw that. Lol. I think it is possible, just way too much work to make it function fully.
I got this ROM booting, just flash it and THIS KERNEL. So far, cellular and 5GHz WiFi don't work, I will be working on a patch though. It will be a all in one patch, with Kernel, WiFi and cellular then you guys can test...
---------- Post added at 07:53 PM ---------- Previous post was at 07:17 PM ----------
Can anyone help me getting data working?
---------- Post added at 08:39 PM ---------- Previous post was at 07:53 PM ----------
southernstyle said:
I don't think anyone has successfully used any of the international Roms. one of the devs told me it had to do with how much more different the source code is on the Sprint model.
Click to expand...
Click to collapse
Who was that Dev? Can you send me their username maybe he can help me
I mean I've gotten some roms to work, only problem is getting the data to work.
Or lets say if I try porting a VZW rom, what would I have to do to get data or is it not possible?
djpabz23 said:
I mean I've gotten some roms to work, only problem is getting the data to work.
Or lets say if I try porting a VZW rom, what would I have to do to get data or is it not possible?
Click to expand...
Click to collapse
That's what I've been trying to figure out... Data seems to be the hardest thing to patch. Does anyone know if there is a modem.img?
1619415 said:
I got this ROM booting, just flash it and THIS KERNEL. So far, cellular and 5GHz WiFi don't work, I will be working on a patch though. It will be a all in one patch, with Kernel, WiFi and cellular then you guys can test...
---------- Post added at 07:53 PM ---------- Previous post was at 07:17 PM ----------
Can anyone help me getting data working?
---------- Post added at 08:39 PM ---------- Previous post was at 07:53 PM ----------
Who was that Dev? Can you send me their username maybe he can help me
Click to expand...
Click to collapse
The dev was Xileforce, but it was him telling me that he heard the source was different. I haven't browsed around much, but if there is a dev porting international to sprint on the Note 5 or Edge Plus, they might know where such files exist. Also, the devs from the international forum that have attempted to port might have insight also.
Could we make a modem.IMG? Or do you guys know where the modem.bin goes?
1619415 said:
I got this ROM booting, just flash it and THIS KERNEL. So far, cellular and 5GHz WiFi don't work, I will be working on a patch though. It will be a all in one patch, with Kernel, WiFi and cellular then you guys can test...
---------- Post added at 07:53 PM ---------- Previous post was at 07:17 PM ----------
Can anyone help me getting data working?
---------- Post added at 08:39 PM ---------- Previous post was at 07:53 PM ----------
Who was that Dev? Can you send me their username maybe he can help me
Click to expand...
Click to collapse
If I had the device I'd help. I really would like bluetooth tethering but sprint disabled it in the bluetooth lib file(native code) only way to get it working is with CM or intl rom.
elesbb said:
If I had the device I'd help. I really would like bluetooth tethering but sprint disabled it in the bluetooth lib file(native code) only way to get it working is with CM or intl rom.
Click to expand...
Click to collapse
I'm honestly not even sure how to get data working or where to start.
1619415 said:
Could we make a modem.IMG? Or do you guys know where the modem.bin goes?
Click to expand...
Click to collapse
I dont think it is modem related. its lib and framework related. As said by the other guy, there is A LOT of source code changes that we don't have access to. It will boot, as you have seen, but the data doesn't work due to how the native code interacts with the hardware on the device. It tries calling methods that do not exist or are named differently. Intl ROMs mainly use GSM. Which is one of the reasons its so tedious. When I had T-Mobile, a simple change in the APN would make intl ROMs work.
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
1619415 said:
I'm honestly not even sure how to get data working or where to start.
Click to expand...
Click to collapse
Read the post I just posted xD
Ok, thank you
...is there Any one who can make theese roms work ?!
Plz
darker.than.black said:
...is there Any one who can make theese roms work ?!
Plz
Click to expand...
Click to collapse
Everything works but DATA, that seems to be the main issue with upcoming ROMs...
UPDATE: Could someone try flashing it and run ##update# that may fix it
after installing note 4 mini rom lollipop update cames then i updated my note 3 neo to lollipop BUT IT WORKS FINE then i installed note 5 rom on my note 3 neo after install finished it shows emeegency call only when i trys to make a call it says not registered on network THEN I FLASHED STOCK ROM BUT POBLEM NOT FIX. I FLASHED SIGNAL FIX TAR FILE FROM NOTEROM THEREND BUT IT DOESNT WORK FOR ME i realy need a help to fix this please help me somebody.
i faced that same problem by installing various roms or flashing kernels but the solution to this problem is only and only that you have to flash the repair firmware for N-750 aka note 3 neo. just visit to this website "www.tsar3000.com" and search for the same.
downloaded zip contains all the four files that are needed to be flashed on the phone to make it factory default and will surely solve your problem too. Best Of Luck...
Thanks I will try
IMEI changed
IF your imei is changed then you need to replace your motherboard
my friend and myself have same mobile (note 3 neo)
we so happenend to install custom roms, luckily my IMEI didnt change,
but my friend's imei changed ( 0011... NULL) ,tried many measures but still couldnt fix..so replaced motherboard
BUT THERE IS A SOLUTION
if you have taken a EFS backup of your IMEI, before this incident has happen for you,then we can fix this issue FOR SURE!
MOTHERBOARD REPLACEMENT FOR MY FRIEND COSTED 7-9K
yes i also face this problem and i think this problem occure in all samsung model
IMEI backup
I SUGGEST EVERY NOTE 3 NEO ROOTED USERS TO TAKE A EFS BACKUP
or else just in case your imei changes then no other meassure other than replacing your mother board
CHEERS :good:
---------- Post added at 11:32 AM ---------- Previous post was at 11:30 AM ----------
baqir2 said:
yes i also face this problem and i think this problem occure in all samsung model
Click to expand...
Click to collapse
what did you do to fix it?????
I tried to flash stock 4.3 then I installed 4.4.2 after I installed 5.1.1 then flashed noterom v3 and the problems start.
Any way can someone tell me how much cost motherboard for my SM-N7505 ? (I'm in italy)
Sent from my SM-N920G using XDA-Developers mobile app
darkoover said:
i suggest every note 3 neo rooted users to take a efs backup
or else just in case your imei changes then no other meassure other than replacing your mother board
cheers :good:
---------- post added at 11:32 am ---------- previous post was at 11:30 am ----------
what did you do to fix it?????
Click to expand...
Click to collapse
changed motherboard
---------- Post added at 07:24 AM ---------- Previous post was at 07:21 AM ----------
suraj lakmitha said:
i tried to flash stock 4.3 then i installed 4.4.2 after i installed 5.1.1 then flashed noterom v3 and the problems start.
Any way can someone tell me how much cost motherboard for my sm-n7505 ? (i'm in italy)
sent from my sm-n920g using xda-developers mobile app
Click to expand...
Click to collapse
it costed somewhere around 7-9k (here in india)
original official motherboard
Darkoover said:
I SUGGEST EVERY NOTE 3 NEO ROOTED USERS TO TAKE A EFS BACKUP
or else just in case your imei changes then no other meassure other than replacing your mother board
CHEERS :good:
---------- Post added at 11:32 AM ---------- Previous post was at 11:30 AM ----------
what did you do to fix it?????
Click to expand...
Click to collapse
just enable flight mode and disable flight mode thats it
Baqir2 said:
just enable flight mode and disable flight mode thats it
Click to expand...
Click to collapse
enabling and disabling flight mode doesnt fix the issue
I have the same Problem, and I fixed it by using the Z3x Box
Your IMEI is Normal or Not? if not , the EFS is broked
ZAKJR10 said:
I have the same Problem, and I fixed it by using the Z3x Box
Click to expand...
Click to collapse
HI.. do you have z3 box i wanted it,just in case something goes wrong in my phone
will you be able to send me??
nicolasneville12 said:
Your IMEI is Normal or Not? if not , the EFS is broked
Click to expand...
Click to collapse
My imei is fake how to re build imei
Sent from my SM-N920G using XDA-Developers mobile app
suraj lakmitha said:
I tried to flash stock 4.3 then I installed 4.4.2 after I installed 5.1.1 then flashed noterom v3 and the problems start.
Any way can someone tell me how much cost motherboard for my SM-N7505 ? (I'm in italy)
Sent from my SM-N920G using XDA-Developers mobile app
Click to expand...
Click to collapse
If your Imei changed you can fix it by BOX !!!