Develop Bugs

Phone screwed ? Can't mount SD / emergency calls only

Ok, where to begin:
I Rooted this weekend and have been installing a few roms, all has been fine. This afternoon I tried to partition a fresh SDcard using the windows-recover.bat method to allow apps2sd and that (I believe) is where it all went wrong.
When I rebooted the phone it went into a boot loop, never getting past the HTC logo.
So I factory reset from the HBOOT menu and it still looped, until I put a new SD card in - then it loads ok (I'm using Defrost 2.41d) but after the initial set up it says emergency calls only - I manually select Orange (the phone is a factory unbranded/unlocked CPW handset) - it says it's not allowed to connect - won't connect using my T-Mobile sim either.
It also says the SDcard isn't mounted no matter what SDcard I try (tried 4x).
I've tried booting into recovery and installing a zip from the SDcard so try and install a new ROM and it fails saying unable to mount SDcard.
I have also done a cache wipe, and basically any other option that sounds like a wipe type option from within the Recovery menu on HBOOT/Clockword MOD.
I'm lost, if I can't access the SDcard in any way then I'm screwed and can't reflash.
Any ideas gratefully received...

have you tried pushing a rom to the phone from your computer? or unrooting with an official HTC RUU ROM and starting again?
also search the "USB bricked" stuff on the desire android development forum...

Thanks for the advice
I'm trying to push a std Official ROM but the PC just doesn't see there is a phone attached when the phone is in normal use mode, it starts to see it in HBOOT mode but then says the driver has failed etc.
Someone elsewhere has mentioned the USB brick possibility but from what little I've read it requies SDcard functionality and my phone just doesn't see ANY SDcard - even in HBOOT / Clockword MOD recovery mode.

any feedback?
could you solve the problem?

Stuck in Recovery

Hello all, I've searched around and tried many different things to resolve my little problem. I'll try and list out all the details of what I've done and perhaps someone could help me find the error in my ways.
I've got a - VZW Droid Incredible - S-On - Unlocked. The H.boot Is 1.02.000 Radio is 2.15.10.07.07.
*History*
I started with a bootloader locked Droid that was stuck in a boot loop that started after a failed OTA update. The H.boot was lower too, I'm not sure what it was. The device would only boot into the stock recovery and factory reset wouldn't help. It just hung on the white HTC screen.
To fix that I tried to flash a variety of stock images from the SD but each time it failed with a versioning error. I assume that was due to the bootloader being locked and on an OLD h.boot After some troubleshooting I was able to issue a fastboot oem reset command and I was able to boot into the OS.
So then I began working with a factory default Droid running 2.2
Once I was in the OS I used the HTC Dev site to unlock the bootloader. That all went well. I was running Stock 2.2 with a unlocked bootloader. Next I flashed a custom recovery. copied a ROM to the SD and booted into recovery to flash CM 7.2. I began to run into problems at this point.
Then and Now when I boot into recovery (TWRP, or ClockworkMod) I'm unable to mount cache, internal SD, External Sd, nor can I toggle USB. I'm not really clear on what causes that. However because I can not mount the SD I can not flash a ROM, and my attempts to get back to a working phone have been unfruitful thus far.
I created a problem at this point when I wiped System. I ASSUMED that I could drop the stock image back onto the SD card and get back to factory but that doesn't work. Because I wiped system each time I reboot the phone I go directly into recovery.
( I really didn't think that it would mount system and wipe it because it wouldn't mount the other partitions... WRONG)
So now I have a inaccessible SD card while in recovery, a wiped system partition (and boot), and no clear way to get back to good.
I've downloaded numerous stock images, formatted two different SD cards FAT32 saved the stock image to the SD Card as PB31IMG.zip and booted to HBoot watched the progress bar load/complete then it stops and I'm left sitting at the bootloader screen. I can reboot expecting to boot into a stock system but each time I'm dropped back into recovery and recovery will tell me that I have no loaded OS, to me that means the PB31IMG didn't write to system, but IDK.
A RUU won't work because I can't boot into android.
I did extract the system.img and the boot.img from a stock image and used fastboot to write both of those partitions without error, but that didn't help either.
Does anyone have some Thoughts or advice on what to do next?
Many thanks,

nodnarb said:
Hello all, I've searched around and tried many different things to resolve my little problem. I'll try and list out all the details of what I've done and perhaps someone could help me find the error in my ways.
I've got a - VZW Droid Incredible - S-On - Unlocked. The H.boot Is 1.02.000 Radio is 2.15.10.07.07.
*History*
I started with a bootloader locked Droid that was stuck in a boot loop that started after a failed OTA update. The H.boot was lower too, I'm not sure what it was. The device would only boot into the stock recovery and factory reset wouldn't help. It just hung on the white HTC screen.
To fix that I tried to flash a variety of stock images from the SD but each time it failed with a versioning error. I assume that was due to the bootloader being locked and on an OLD h.boot After some troubleshooting I was able to issue a fastboot oem reset command and I was able to boot into the OS.
So then I began working with a factory default Droid running 2.2
Once I was in the OS I used the HTC Dev site to unlock the bootloader. That all went well. I was running Stock 2.2 with a unlocked bootloader. Next I flashed a custom recovery. copied a ROM to the SD and booted into recovery to flash CM 7.2. I began to run into problems at this point.
Then and Now when I boot into recovery (TWRP, or ClockworkMod) I'm unable to mount cache, internal SD, External Sd, nor can I toggle USB. I'm not really clear on what causes that. However because I can not mount the SD I can not flash a ROM, and my attempts to get back to a working phone have been unfruitful thus far.
I created a problem at this point when I wiped System. I ASSUMED that I could drop the stock image back onto the SD card and get back to factory but that doesn't work. Because I wiped system each time I reboot the phone I go directly into recovery.
( I really didn't think that it would mount system and wipe it because it wouldn't mount the other partitions... WRONG)
So now I have a inaccessible SD card while in recovery, a wiped system partition (and boot), and no clear way to get back to good.
I've downloaded numerous stock images, formatted two different SD cards FAT32 saved the stock image to the SD Card as PB31IMG.zip and booted to HBoot watched the progress bar load/complete then it stops and I'm left sitting at the bootloader screen. I can reboot expecting to boot into a stock system but each time I'm dropped back into recovery and recovery will tell me that I have no loaded OS, to me that means the PB31IMG didn't write to system, but IDK.
A RUU won't work because I can't boot into android.
I did extract the system.img and the boot.img from a stock image and used fastboot to write both of those partitions without error, but that didn't help either.
Does anyone have some Thoughts or advice on what to do next?
Many thanks,
Click to expand...
Click to collapse
Try this, reformat your sdcard fat32 with a pc. Then place only this file http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip on the sd in no folders (Do not rename). Boot to hboot (vol down + power), it should find the file and prompt you to press vol up to install. I think your issue with the ruu before was that you were trying to flash an older version than you already have installed. If that dosent work try fastboot flashing cwm again, and see if it can mount the sd then.

Thread moved. Please post all questions here in the correct section of the forum.
Thanks
AvRS

Hi... Mine is incredible s unlocked bootloader... I have cwm installed but now I want to flash 4ext touch.. I tried flashing it from command but it failed.. Also I grief installing by 4ext updater, it did flashed 4ext but didn't overwrite cwm... And hence after pressing vol and power button only cwm comes... Pls help with this..
Sent from my Incredible S using xda app-developers app

shivaagarwal1 said:
Hi... Mine is incredible s unlocked bootloader... I have cwm installed but now I want to flash 4ext touch.. I tried flashing it from command but it failed.. Also I grief installing by 4ext updater, it did flashed 4ext but didn't overwrite cwm... And hence after pressing vol and power button only cwm comes... Pls help with this..
Sent from my Incredible S using xda app-developers app
Click to expand...
Click to collapse
You'll probably get better help in the Incredible S section. This is for just the plain olé Incredible.

Phone wiped itself? And other problems.

Hello. I have a i317 Note 2, running on T-mobile. It is rooted and was running Blisspop 5.x rom. I had set my phone down and noticed it was on the Samsung screen. Figured it was just a random reboot; but it never booted up. I reboot into recovery (TWRP) to find that there is no OS installed. It says my internal storage is 0mb, my external storage is 0mb (I have a 32gb sd card). I cannot mount nor access external storage, or anything internal. I cannot format data. I am able to see my phone while it is in recovery on my computer. But once I put it in download mode, it can no longer be seen. ADB cannot see it in download mode, I cannot fastboot (unless I'm doing it wrong). I used Odin, which can see it in download mode, but it did not fix anything. Also, now the phone says it is unable to format to remove encryption.
Prior to this it had a problem where it would be unable to stat things. Is there any way to fix this? Or am I SOL?

SchusterIX said:
Hello. I have a i317 Note 2, running on T-mobile. It is rooted and was running Blisspop 5.x rom. I had set my phone down and noticed it was on the Samsung screen. Figured it was just a random reboot; but it never booted up. I reboot into recovery (TWRP) to find that there is no OS installed. It says my internal storage is 0mb, my external storage is 0mb (I have a 32gb sd card). I cannot mount nor access external storage, or anything internal. I cannot format data. I am able to see my phone while it is in recovery on my computer. But once I put it in download mode, it can no longer be seen. ADB cannot see it in download mode, I cannot fastboot (unless I'm doing it wrong). I used Odin, which can see it in download mode, but it did not fix anything. Also, now the phone says it is unable to format to remove encryption.
Prior to this it had a problem where it would be unable to stat things. Is there any way to fix this? Or am I SOL?
Click to expand...
Click to collapse
You used Odin for what? Did you try flashing stock rom? Try using the rescue option in KIES. It has saved me in the past when I had messed up my device.

NickVXD said:
You used Odin for what? Did you try flashing stock rom? Try using the rescue option in KIES. It has saved me in the past when I had messed up my device.
Click to expand...
Click to collapse
Sorry about that, forgot that bit! I used odin to flash the stock rom, and even tried a .pit repartition. Kies does not see the phone. At most, it sees it but will not connect. So there are no rescue options to be had.

I thought I made progress. I was able to do the firmware reset with Keis. The phone got to the blisspop launch screen but just stayed there. I rebooted into TWRP and it still said I had 0mb of internal storage, and still had no OS installed. ADB still didn't see the phone, either. Now the phone will no longer boot to samsung, or to recovery, or TWRP. If I hold the power button the proximity sensor shines for a moment but that's it.

Same problem here, same phone but t0lte that ran many ROMs over 4 trouble-free years . Still at the pre-Kies stage, thus still can access twrp. Tried overwriting twrp with philz or CWM - Odin says PASSED but reality say no dice - twrp is still the recovery. Tried flashing stock - Odin again said PASSED, but still have twrp reporting 0MB.
Spent 1day surfing xda to ensure I have correct files and procedures.
Wonder if there has been any solution found...

When flashing a new recovery, do not check auto reboot. Flash the recovery in Odin. When you see the word reset in the status window, remove the USB cable from the phone, remove the battery, replace the battery, boot into recovery. Hopefully, this method will work.

Galaxy Note 8 (GT-N5110) PC Connection Problems - Boot Loop - SOLVED by ME

NO ONE?????
ODIN --> Flash Stock Recovery (AP) with NAND Erase All Option Checked (because it seemed to make sense) + Auto Reboot + F. Time Reset --> Reboots to Stock Recovery (did not work before) --> Reboot into Recovery --> Wipe Data/Cache and Dalvik just to be safe (this crashed it before) --> Reboot. THE END
TL/DR: I am currently stuck on recovery/update mode. Any attempt to wipe data or clear dalvik crashes it. any attempt to access data through TWRP crashes it. Flashing stock rom or custom rom does not help. Somethings wrong with /data? It thinks it has root from the CF Auto Root, but does not really? Something wrong with partitions? Should I wipe the nand with ODIN 3.10? Repartition? ugh ... Please help ...
I have searched the forums and found nothing that describes this issue precisely. I have also tried to apply various suggestions to repair, which, for the most part seems to have made it worse. I am hoping that people still look at this forum.
PC - Windows 7
Initially @4.2.2 ---> Touchwiz debloated stock ROM which I rooted. It worked for a couple years, but the device crashed frequently. I do not recall much about the installation, but believe that I used CWM/TWRP at the time. After installing the ROM, I ran triangle away (out of the box, it had 4.1.2, i recall)
I decided to upgrade to the most recent stock ROM (4.4.2). In order to do so, I used an easy installer I found else where on XDA. (http://forum.xda-developers.com/showthread.php?t=2773712 ---ODIN One Click exe). The device was not initially recognized, so I reinstalled the official driver package (said that they already existed, but I installed again anyway). Ran 1-click and it appeared to work.
Initially, the device booted (long startup) and seemed to function. It also preserved all data and programs (presumably did not touch the internal memory - 16 GB) and possibly root /data.
I then tried to root through most recent ODIN with CF auto root. This appeared to work and rebooted (again, showing the updating android apps screen before fully booting).
The only thing that i could find that had changed was the wallpaper (showed on lock screen but not on home screen). I could no longer find the image, so tried to go to /data/data to find it with root explorer equivalent. This is where it started to act weird.
NOTE: I did not clear anything (system cache, etc. at any point)<--a lie (see below)
It showed the root folder fine, but when I clicked on /data it took a while and could not access it. It either rebooted itself or I rebooted, but this time it was stuck in a boot logo loop. I entered download mode and flashed TWRP through ODIN. I set it to not reboot automatically so that the bootloader was not overwritten automatically (thus losing recovery). TWRP came up. The computer recognized it as a Media Device after I mounted USB storage. Just in case, I copied all of the important files from the internal SD Card to my computer. I then tried to go to the file explorer to copy the wall paper and it forced a reboot. At this point it was stuck on a logo screen boot loop again. I was able to enter Download mode and reflash TWRP. This allowed me to enter recovery again, however, now it would only boot directly into recovery (or Download mode if I did the button combo). The interesting thing was that it would reboot two or three times before successfully entering TWRP.
I believe I tried to reflash the stock ROM at this point, which might have worked but made no difference.
I was also having a lot of problems getting Windows to properly recognize the device. I had to reinstall the drivers a couple times. I tried Kies after the problems started and it tried to connect by failed. The diagnose connection did not work either. I was not able to get Kies to connect though I tried several times throughout the attempted repair
I downloaded a stock-rooted 4.4.2 ROM from here and tried to flash it. It failed.
I also tried to flash via Heimdall, but initially could not find any stock ROMs for Heimdall for the Galaxy 8. (The driver utility that is included helped to get the phone recognized by Windows sporadically).
I decided to switch over to CWM touch recovery, which I flashed via ODIN (I was having issues with TWRP again and also could not get windows to recognize the device as a media device when I mounted USB storage). This worked after a couple tries and I was able to enter CWM. I attempted to flash the stock ROM but it failed. Either at that point or when I tried to mount data it returned an error that device did not have root. Again, it would only boot into CWM (on its own) or Download mode (with key combo). At some point around here I cleared the cache and dalvik (error) after it returned an error saying insufficient space when trying to flash ROM.
I dissected the .exe from the autoflash used in the beginning (stock unrooted 4.4.2) and used the contents (system.img, cache.img, hidden.img, tz.img, recovery.img and one other I do not remember) in Heimdall to create a Heimdall package. At this point I figured out I did not need to create the package, but just specify the individual files. I flashed. It appeared to complete System.img successfully and then failed. Tried again with the same result.
Now when I rebooted, it would enter download mode with the Key combo, but otherwise it booted instantly to an error screen to the effect that a firmware installation had failed and to use the repair function in Kies to fix. Kies still did not recognize it.
At this point, I figured I should stop. Currently I can get to the download screen or the error screen. The computer recognizes it but intermittently fails to install driver. Zadig.exe sees it as Gadget Serial. Sometimes Windows just sees it as SAMSUNG_Android, in which case drivers fail. Once or twice I got it to recognize it as Samsung USB Composite Device, but Kies would still not work.
That's all i have for now. If more information is needed, let me know and I will update the post when I get home from work tonight (this is from memory).
Thank you
UPDATE: last night I went home and was able to get it back to the point where I could flash TWRP or CWM recovery. If I try to flash Stock Recovery, it fails. A minor problem is that I cannot turn it off - it just turns it self on again, so the battery keeps running down.

How to repair Wileyfox Swift when I can get into TWRP but not bootloader

Hi. I've just updated CM13 to the latest nightly using TWRP, but now the system just boots into TWRP - that's whether I select boot system, recovery, or bootloader. I tried restoring from a TWRP backup or another copy of the nightlies zip - it all seems to work fine but doesn't solve the problem. I can connect to the 'recovery' device using adb but adb restart bootloader just loads TWRP again. I've tried wiping first the dalvik/cache, then everything but the internal card, then finally everything but nothing seems to work.
I did get something a little bit like this a few days ago because SuperSU was complaining that I needed to update the binary. I let it do it the way that it suggested one does when TWRP is installed and afterwards couldn't reboot into system, but after a few minutes of frustration sorted things by wiping various partitions.
I attempted to load the full system restore files (cm-13.1-ZNH2KAS29G-crackling-signed-fastboot-74bb753396.zip) using TWRP but that didn't work (I imagine because they're designed to be run via fastboot). I tried loading them via the ADB sideloader option included in TWRP but it failed after a few seconds (I think the message was 'transmitting 0.0x'
I opened that zip and copied the various files to the external card, but I then baulked at installing the image files manually because the only partition option I'm given is boot and my understanding is that each image file should go into its own partition.
The only other potentially pertinent information I can think of:
TWRP keeps reporting "E: Unable to find partition size for '/recovery'"
Has anyone got any ideas please? I had been musing that my next phone would have OTG and NFC, but I wasn't planning to upgrade just yet if I don't absolutely have to.

Have you got it fixed? And if yes - how? I am stuck in a similar situation and can't find a solution for it. Tnx in advance.