Hello, so quite sometime ago I rooted my phone, or unrooted it. I am not sure what the term is, I dont even remember why I done this in the first place. Anyways today I wanted to just put my phone back to like it was when I got it, and in doing so I have actually broke my phone I can't get my phone to boot up anymore, I always get a message saying I have no OS installed. I am really useless with all of this so I would appreciate it if there is a patient person out there who can help me get my phone back on and back to how it was when I recieved it. I am sure I need to add more information but I dont know what so please tell me what you guys need to know and I will try and provide the answers.
This should be the first rule when asking for help.
Post fastboot getvar all result (delete serial & imei no.)
Without this info, no one will be able to offer any help
ckpv5 said:
This should be the first rule when asking for help.
Post fastboot getvar all result (delete serial & imei no.)
Without this info, no one will be able to offer any help
Click to expand...
Click to collapse
Where do I find this?
Do you have fastboot & adb on your PC ? You should have one, if not how can you install a custom recovery and root your device before ?
If you're not sure .. install this : http://forum.xda-developers.com/showthread.php?t=2317790
Put your device in bootloader mode and connect to PC
Open a command prompt and type fasboot getvar all then "enter"
Copy the outcome and paste here
ckpv5 said:
Do you have fastboot & adb on your PC ? You should have one, if not how can you install a custom recovery and root your device before ?
If you're not sure .. install this : http://forum.xda-developers.com/showthread.php?t=2317790
Put your device in bootloader mode and connect to PC
Open a command prompt and type fasboot getvar all then "enter"
Copy the outcome and paste here
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I think thats what you want right?.
Yes .. that's the one.
You have two options :
Option 1:
Install new stock ROM with a RUU - Download : https://www.androidfilehost.com/?fid=95916177934555499
you need to relock bootloader - run command fastboot oem lock
run RUU (right click the RUU and select run as administrator)
you need to use USB2.0 on your PC
RUU will wipe everything on your device including your files on internal storage
Option 2:
Restore a non-rooted TWRP backup 4.20.206.1
No need to relock bootloader
No internal storage wipes
Read how-to and all the needed files are here : http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Good luck .. I have to sleep now, good night
ckpv5 said:
Yes .. that's the one.
You have two options :
Option 1:
Install new stock ROM with a RUU - Download : https://www.androidfilehost.com/?fid=95916177934555499
you need to relock bootloader - run command fastboot oem lock
run RUU (right click the RUU and select run as administrator)
you need to use USB2.0 on your PC
RUU will wipe everything on your device including your files on internal storage
Option 2:
Restore a non-rooted TWRP backup 4.20.206.1
No need to relock bootloader
No internal storage wipes
Read how-to and all the needed files are here : http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Good luck .. I have to sleep now, good night
Click to expand...
Click to collapse
Option one just stays on updating 0/6 sending and nothing happens. Option 2 doesnt make sense to me, I really have no idea what most of it means.
Ok so this morning I tried option one again. It went through the first 6 stages fine, then it got stuck on the next set of stages at 1/7. When I restart my phone into the recovery screen type thing I have in red letters OS - (4.20.206.1) but I am still unable to start my phone up. I have disabled firewalls and also using USB2.0 when trying to do this process. Maybe this one that has been linked is not the right one for me? Or maybe I am doing something wrong?. I would really love to get my phone back working so all help is really appreciated.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dcdaa6e0
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
You have USB/Device connection problem. First it was 0/6 and now 1/7 ...
Which windows version that you use ? try with a Win7 PC .. I don't know many people cannot run RUU on windows higher version that Win7. I don't have problem on any windows version including my current Win 10.
What do you don't understand about option 2 ? It's very straight forward.
Install latest TWRP 2.8.6.0 or TWRP 2.8.7.0 (you need to reunlock bootloader because you relocked it for option 1)
Extract and copy the backup folder to TWRP backup on your device
Restore backup .. done
Or
Just install any of Sense based ROM that available in Development thread to get your device up & running ... then you can start that option 1 & 2 again
But seeing you mentioned OS - 4.20.206.1 in red, you need to get option 1 done because the firmware installation was incomplete
ckpv5 said:
You have USB/Device connection problem. First it was 0/6 and now 1/7 ...
Which windows version that you use ? try with a Win7 PC .. I don't know many people cannot run RUU on windows higher version that Win7. I don't have problem on any windows version including my current Win 10.
What do you don't understand about option 2 ? It's very straight forward.
Install latest TWRP 2.8.6.0 or TWRP 2.8.7.0 (you need to reunlock bootloader because you relocked it for option 1)
Extract and copy the backup folder to TWRP backup on your device
Restore backup .. done
Or
Just install any of Sense based ROM that available in Development thread to get your device up & running ... then you can start that option 1 & 2 again
But seeing you mentioned OS - 4.20.206.1 in red, you need to get option 1 done because the firmware installation was incomplete
Click to expand...
Click to collapse
Yes maybe I do but I am not sure why, maybe I need to look into seeing if my motherboard needs an update or if any windows updates are needed. I am on Windows 7 but like I said, it goes through the first 6 steps then as it boots the bootloader up again I hear the sound that my computer makes when plugging in a USB cable. However even if I leave it, it will not go past 1/7. But if I take the cable out it reconises I have done that so that makes me wonder if it is a USB problem?.
I dont understand option 2 because I dont know anything about all of this, I shouldnt have done it in the first place and I dont even remember why I did. I also must have deleted my backups as I cant find them. The part I was confused at, was which TWRP to get, then how to get it on my phone as my computer does not reconise my phone in the state it is in so I cant just go into the phone and place it. I also dont have an SD card with my phone either.
I will try updating my PC and try and get option 1 working and report back. Thank you for helping by the way, I really appreciate your patience with me.
Try also to install latest HTC USB driver.
Download HTC Sync Manager and install. Then uninstall the HTC Sync Manager but leave the HTC Driver installed.
http://www.htc.com/us/support/software/htc-sync-manager.aspx
Is there a way to wipe this OS version and try this whole thing again? I have found my 2.0 USB ports, I have tried a different cable and it still gets hung up. Only now it doesnt move past the 0/6 whereas it used to go through all of them then into the 1/7 and get stuck on this part. I also can try a different PC if need be.
KDK11 said:
I also can try a different PC if need be.
Click to expand...
Click to collapse
That is what I would suggest.
Also, does your PC have USB 3.0 on the ports? This has been known to cause problems with the RUU.
Ok so I have done the steps suggested now, when I uninstalled the HTC Sync Manager it let the process complete. It is now on a screen which says Android is upgrading, optimizing app 17-261. Is that my phone fixed? Or is there more I need to do now that it actually has turned on?.
KDK11 said:
It is now on a screen which says Android is upgrading, optimizing app 17-261. Is that my phone fixed?
Click to expand...
Click to collapse
Looks that way. It should boot into OS after its done optimizing all the apps, which is normally pretty slow (with that many, it will take 10 or more) since Android moved from Dalvik to ART.
Well I would like to say a massive thank you for the help I really appreciate the patience and help. So thank you again. I would have been lost without you's.
KDK11 said:
Ok so I have done the steps suggested now, when I uninstalled the HTC Sync Manager it let the process complete. It is now on a screen which says Android is upgrading, optimizing app 17-261. Is that my phone fixed? Or is there more I need to do now that it actually has turned on?.
Click to expand...
Click to collapse
That's it ... nothing else to do .. run the setup wizard and enjoy your device
KDK11 said:
Well I would like to say a massive thank you for the help I really appreciate the patience and help. So thank you again. I would have been lost without you's.
Click to expand...
Click to collapse
No problem .. glad that we could help
O2 RUU Marshmallow CID O2_001 pleaseee
Hi!
I have an HTC One M8 from O2 UK, that i give me a lot of problem after updating to Marshmallow.
After successfully complete the update i have done a factory reset which i guess it soft brick my phone.
It will show optimizing apps, after that starting apps and is stuck there until battery dies. I try many methods, formatting cache partition from recovery menu, made another factory restore from fastboot, I even left it plugged one night and nothing.
The only hope is if i find a RUU for CID O2_001
The phone is S-ON non rooted, i unlock then re lock boot loader thanks to htcdev website.
adb fastboot getvar command show this.
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: .................................................
(bootloader) imei: .......................................
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.126s
Please help me made the phone working again!
Thank you!
cossty said:
Hi!
I have an HTC One M8 from O2 UK, that i give me a lot of problem after updating to Marshmallow.
After successfully complete the update i have done a factory reset which i guess it soft brick my phone.
It will show optimizing apps, after that starting apps and is stuck there until battery dies. I try many methods, formatting cache partition from recovery menu, made another factory restore from fastboot, I even left it plugged one night and nothing.
The only hope is if i find a RUU for CID O2_001
The phone is S-ON non rooted, i unlock then re lock boot loader thanks to htcdev website.
adb fastboot getvar command show this.
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: .................................................
(bootloader) imei: .......................................
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.126s
Please help me made the phone working again!
Thank you!
Click to expand...
Click to collapse
Hello,
In this thread you will find the firmware for your phone. It looks like you know the process of installing your firmware, so if I were you I'd down load the proper firmware and try the whole process all over again.
Jerrel7 said:
Hello,
In this thread you will find the firmware for your phone. It looks like you know the process of installing your firmware, so if I were you I'd down load the proper firmware and try the whole process all over again.
Click to expand...
Click to collapse
Hi!
I didn't find because it is to new. It's an O2 UK, android 6 version, cid O2_001.
I did something else, i flashed TWRP recovery and then i flash latest InsertCoin rom, and now the phone it is working again.
Thank you!
Related
After Update bootloop ... please help!
Hello everyone!
So im trying to fix this HTC One M8 since yesterday. My gf tried to install the latest update, after she did the phone went into bootloop.
It was rooted, TWRP recovery installed.
Now i tried yesterday to get i back to stock, but strangely nothing seems to work. I downloaded a couple of ruu ZIP files, none of them worked. Only thing worked was the cyanogenmod but well... she wants her phone back to stock
Every Stock-image i could find was for 4.16.401.10, but the phone says its 4.16.401.13.
Please help me! What exactly must i do in order to get i back to stock?
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
EDIT
strange thing is, even with android SDK and USB drivers my laptop wont execute an RUU.exe... it fails due to not finding the device even though its connected to the laptop and i can acess the phones memory
Khaira said:
So im trying to fix this HTC One M8 since yesterday. My gf tried to install the latest update, after she did the phone went into bootloop.
It was rooted, TWRP recovery installed.
Click to expand...
Click to collapse
In addition to stock 4.16.401.13 ROM, you will also need stock recovery. Since TWRP is on the phone, OTA will cause the phone to boot over and over looking for stock recovery (and not finding it).
Khaira said:
Now i tried yesterday to get i back to stock, but strangely nothing seems to work. I downloaded a couple of ruu ZIP files, none of them worked.
Click to expand...
Click to collapse
Unless the RUU zip is 4.16.401.13, its going to fail CID or version checks.
Khaira said:
Every Stock-image i could find was for 4.16.401.10, but the phone says its 4.16.401.13.
Click to expand...
Click to collapse
You can get .13 stock nandroid and recovery here: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Note this is a nandroid, and not a flashable ROM zip. So restore according to the instruction given in the same thread.
Khaira said:
strange thing is, even with android SDK and USB drivers my laptop wont execute an RUU.exe... it fails due to not finding the device even though its connected to the laptop and i can acess the phones memory
Click to expand...
Click to collapse
Did you try with the phone in fastboot mode?
Any response if you type the command: fastboot devices
Response should be the phone's serial number if you have fastboot connectivity.
What Windows version?
Also, as previously stated, unless the RUU is 4.16.401.13, it will fail anyway.
I got it! Thanks a lot! Seems really like I was too stupid to find the thread u posted
Khaira said:
Seems really like I was too stupid to find the thread u posted
Click to expand...
Click to collapse
Its actually a bit hard to find, as its in Q&A. Deserves to be made sticky.
HTC One M8
Unlocked and S-off
From UK so with international network
Cyanogenmod 11 i think
Clockwork recovery
Soooo i bought the M8 secondhand with Cyanogenmod installed, however, i couldnt do any updates due to error status 7. i tried the normal fix (delete code which checked authorisation of phone) but to no avail. since then the error came back and i managed to get a different error on reboot: "root access possibly lost. fix?". I've cleared cache(s) and done a factory reset. No matter what i pressed it would be in a boot loop. I can still get to bootloader and recovery. then i tried to change the recovery to TWRP however when i try and fastboot, my device is not recognised by my laptop so i cannot add the ADB driver to the device.
sorry for sounding very vague / idiotic, i have no idea what i have done and no idea what i am doing to try and fix it. that means sadly i will need to be spoonfed the fix. if you need any more details or pictures of the problem let me know
thanks in advance
josborn42 said:
i couldnt do any updates due to error status 7. i tried the normal fix (delete code which checked authorisation of phone) but to no avail.
Click to expand...
Click to collapse
Are you trying to update to CM12.1? If so, the error is for a reason, and not to be bypassed in the way you describe.
If you are on an hboot older than 3.19, I don't think it will work with CM12 and 12.1. You'll need to update hboot (and rest of firmware, preferably) to proceed.
Also, CWM may be too old for CM12 as well.
josborn42 said:
then i tried to change the recovery to TWRP however when i try and fastboot, my device is not recognised by my laptop so i cannot add the ADB driver to the device.
Click to expand...
Click to collapse
Not sure what you mean here. Are you trying to install HTC Sync (and corresponding driver) by connecting the phone?
You can just do an XDA search for "simple adb" and you will find a couple really easy adb/fastboot installers.
how do i see what hboot i am on? and how would i update it?
i've installed HTC Sync but it doesn't recognise my phone being connected (so i cant view any files on the phone) and i've installed a simple ADB/fastboot but i can't see the driver option when trying to add it to my phone on Device manager. i have got to the stage whereby i have the ADB/fastboot folder and have the TWRP file in the same folder, just i cant get any further.
where would i begin getting to cyanogenmod 12.1, or would it be easier to revert back to a basic android os?
i know this is probably incredibly frustrating for you as i am a complete novice, but i greatly appreciate your help
i would post pictures to help but i cant as im a new member, i will when i can
josborn42 said:
i've installed HTC Sync but it doesn't recognise my phone being connected (so i cant view any files on the phone)
Click to expand...
Click to collapse
This in itself does not mean the phone is not connecting by fastboot. And fastboot is the important thing here, so we can update TWRP, etc.
Try rebooting into fastboot mode, and try the command and see if your phone's ID is returned: fastboot devices
If you don't get the phone's ID and just "waiting for device" you do indeed have some type of USB connectivity problem.
josborn42 said:
how do i see what hboot i am on? and how would i update it?
Click to expand...
Click to collapse
Boot into bootloader, andyour hboot number is listed near the top of the screen.
Since you are s-off, its fairly easy to update the firmware (and I would suggest to update all the firmware, not just hboot) by flashing the proper firmware.zip. But let's determine whether that is even the problem, before we worry about flashing firmwares.
hboot is: 3.16.0
also my phone is detected by my laptop so all is well there
i have installed a simple 15 second ADB file but am unsure how to proceed from here
josborn42 said:
hboot is: 3.16.0
Click to expand...
Click to collapse
Your firmware is very old, so will need to be updated to run CM12.1. Also, newer versions of TWRP will not run with your old hboot.
Do a fastboot getvar all, and post the output, but delete your IMEI and serial numbers (as these are private info). Need more details on the phone (particularly CID) in order to know how to proceed.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s
josborn42 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s
Click to expand...
Click to collapse
I'm going to suggest WWE/International firmware. The updates are available way before O2 updates.
Download this firmware (it also includes TWRP2.8.4.0). Rename it to firmware.zip and place it into your fastboot folder.
Next, boot into fastboot and change your CID to superCID (it won't flash with the O2 CID)
fastboot devices to make sure you are connected (a bunch of letters and numbers/your serial# means you are)
fastboot oem rebootRUU (a black screen with the HTC logo means you are in RUU mode)
fastboot oem writecid 11111111 (eight ones) You are now superCID!
Now flash the firmware
fastboot flash zip firmware.zip
If you get "error 90 hboot pre-update" (and you probably will with how old your current firmware is) run the same command again and the firmware will flash properly. The first run only updated your hboot.
The process will stop at 75% to 90%. That's normal and gives you a chance to check your console output. The last few percentage is the reboot.
The bar will fill to 100% after you enter fastboot reboot-bootloader
That's it. Good luck!
thank you both so much! so now do i just download the appropriate cyanogenmod version and flash it over?
josborn42 said:
thank you both so much! so now do i just download the appropriate cyanogenmod version and flash it over?
Click to expand...
Click to collapse
Yes. But there are more ROMs out there as well. Try them out and find the one that suits your needs best.
hi there i have htc one m8 rooted s-on & software status is modified
i got a new update so i flashed the stock recovery then downloaded the update and pressed install
it was loading the update and suddenly the screen frozen on the htc ONE screen without responding
i tried the volume down + power button nothing happened then i tried volume up + power button
it reboots and freezes on the same screen - tried to remove the sim & sd card but nothing happened
what should i do plz ???
cid : htc_j15
build number : 4.16.401.10
Hi,
second try. First post didn't go through... good thing I didn't save what I typed.
I'm trying to update my firmware, I've read somewhere that a RUU is the easiest way to do so. The one I found "somewhere" doesn't go through with the update proses. It spits out error 155, bootloader is relocked hboot version is 3.16.000 and I'm S-on (not that I was able to change that).
I'm loosing my patience and I'm about to throw the phone in the trash. I've some one can point me to a RUU that work with it I'd be in your debt. The carrier is O2 Germany BTW.
thanks and happy new year.
Even though I can guess which RUU that you might need .. is best to post
fastboot getvar all result without serial & imei no. to confirm it
If it is really a O2, I'll link you the RUU
ckpv5 said:
Even though I can guess which RUU that you might need .. is best to post
fastboot getvar all result without serial & imei no. to confirm it
If it is really a O2, I'll link you the RUU
Click to expand...
Click to collapse
thanks for the reply, I was able to calm down a bit in the meantime.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *****
(bootloader) imei: ****
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
here's the result I put in "****" instead of the serial & imei no. as I guess you meant I shouldn't post that online?
PortentousLad said:
thanks for the reply, I was able to calm down a bit in the meanwhile.
here's the result I put in "****" instead of the serial & imei no. as I guess you meant I shouldn't post that online?
Click to expand...
Click to collapse
Yeah .. not to post them online.
Here is your RUU - https://www.androidfilehost.com/?fid=95916177934555499
This will update your device directly to lollipop 4.20.206.1
then after check for software update, I believe there will be a few more OTAs
ckpv5 said:
Yeah .. not to post them online.
Here is your RUU - https://www.androidfilehost.com/?fid=95916177934555499
This will update your device directly to lollipop 4.20.206.1
then after check for software update, I believe there will be a few more OTAs
Click to expand...
Click to collapse
This will update your device directly to lollipop 4.20.206.1
then after check for software update, I believe there will be a few more OTAs[/QUOTE]
Thanks for the quick response. I've started the download, but slow internet means it'll take about 45min I'll report back once I'm done.
I realized I haven't really said anything about my intentions, I did that the first time I wrote the post which wasn't posted because my session in the forum got kicked or something.
I wanted to update CM to CM12 and I've managed to flash a stock ROM with lollipop but wifi won't work. So my main concern was updating the firmware so that I can flash CM12. This would enable me to do so?
thanks again.
Restore a stock ROM, you can't use lollipop. Wifi won't work because you have hboot 3.16.0000
You only can restore 1.54.206.10 stock ROM and its stock recovery then do all OTAs up to lollipop then only it work for wifi and other thing.
Using a RUU will remove everything on your device including internal storage (so make backup) then it will update everything including firmware to lollipop. So it is faster compare the nandroid backup method. You have less OTA to do.
Got to rest now .. already in bed .. its 4 AM here .. I'll check your progress tomorrow .. good luck
ckpv5 said:
Restore a stock ROM, you can't use lollipop. Wifi won't work because you have hboot 3.16.0000
You only can restore 1.54.206.10 stock ROM and its stock recovery then do all OTAs up to lollipop then only it work for wifi and other thing.
Using a RUU will remove everything on your device including internal storage (so make backup) then it will update everything including firmware to lollipop. So it is faster compare the nandroid backup method. You have less OTA to do.
Got to rest now .. already in bed .. its 4 AM here .. I'll check your progress tomorrow .. good luck
Click to expand...
Click to collapse
the applications froze... has been stuck at 0/6 for over an hour now.
Edited: I'm downloading the stock ROM from http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860 now and will try to go the long way round.
PortentousLad said:
the applications froze... has been stuck at 0/6 for over an hour now.
Click to expand...
Click to collapse
When you asked for RUU I expect you know all the requirements to run RUU ...
Your problem is related to PC/USB to device connection problem ...
You need to relock bootloader before you run RUU because your device is S-On
(I believe you did that as stated on post #1)
and you need a Windows PC with USB2.0 and latest HTC USB driver installed.
If you're not sure about HTC USB driver - download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install then after uninstall HTC Sync Manager but leave the HTC USB driver
ckpv5 said:
When you asked for RUU I expect you know all the requirements to run RUU ...
Your problem is related to PC/USB to device connection problem ...
You need to relock bootloader before you run RUU because your device is S-On
(I believe you did that as stated on post #1)
and you need a Windows PC with USB2.0 and latest HTC USB driver installed.
If you're not sure about HTC USB driver - download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install then after uninstall HTC Sync Manager but leave the HTC USB driver
Click to expand...
Click to collapse
My bad forgot to deĆnstall the sync manager... BRB.
Edited: That did the trick RUU worked flawlessly and all is fine now, as a token of my gratitude I donated some money. It's not much, about what I can afford right now, but I felt like it since I#ve been struggling with this problem for so long now.
So thank you very much for the quick responses and the patience. Have a nice year!
PortentousLad said:
My bad forgot to deĆnstall the sync manager... BRB.
Edited: That did the trick RUU worked flawlessly and all is fine now, as a token of my gratitude I donated some money. It's not much, about what I can afford right now, but I felt like it since I#ve been struggling with this problem for so long now.
So thank you very much for the quick responses and the patience. Have a nice year!
Click to expand...
Click to collapse
Great .. now you fixed it.
Thanks for the donation .. highly appreciated
Need help with RUU file
Hi can anyone help me with the right RUU file for my HTC ONE M8
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ******
(bootloader) imei: *******
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__059
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
eden2oscar said:
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__059
Click to expand...
Click to collapse
There is no RUU for your current firmware version which is 6.14.707.1
Install the latest TWRP 3.x (don't use your current one which I believe is 2.7.0.2)
and restore 6.14.707.1 nandroid backup
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
ckpv5 said:
There is no RUU for your current firmware version which is 6.14.707.1
Install the latest TWRP 3.x (don't use your current one which I believe is 2.7.0.2)
and restore 6.14.707.1 nandroid backup
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Click to expand...
Click to collapse
I Have no backup
eden2oscar said:
I Have no backup
Click to expand...
Click to collapse
I know that you don't have backup .. that's why I gave the link to my backup thread.
Read post #1 in that thread on how-to : all the 14 steps
The backup is on post #3
I gotta go now ... good luck
ckpv5 said:
I know that you don't have backup .. that's why I gave the link to my backup thread.
Read post #1 in that thread on how-to : all the 14 steps
The backup is on post #3
I gotta go now ... good luck
Click to expand...
Click to collapse
:good:Thanks a lot man, it worked for me :good:
Please help me find the correct stock rom, s-on so might be needing equal or greater level
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.15.720.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
siddharthsachdeva said:
Please help me find the correct stock rom, s-on so might be needing equal or greater level
(bootloader) version-main: 6.15.720.2
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) security: on
Click to expand...
Click to collapse
Use 6.15.720.2 TWRP backup - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
or install 6.15.720.2 RUU zip in RUU mode - https://www.androidfilehost.com/?fid=24591000424941691
ckpv5 said:
Use 6.15.720.2 TWRP backup - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
or install 6.15.720.2 RUU zip in RUU mode - https://www.androidfilehost.com/?fid=24591000424941691
Click to expand...
Click to collapse
i dont want to use twpr, i prefer ruu zip or exe but the problem I already have this zip and it can not be execute using adb it shows the maximum allowed size reached kind of thingy and when put in external sdcard and restarted in bootloader/recovery it did pick the zip file. I waited for about mins and it said to press power button to restart and nothing changed tried a few times but nothing is happening. already run the fastboot oem lock command before doing all this. can i know what m i doing wrong? or can I have a exe file. thank u
siddharthsachdeva said:
i dont want to use twpr, i prefer ruu zip or exe but the problem I already have this zip and it can not be execute using adb it shows the maximum allowed size reached kind of thingy and when put in external sdcard and restarted in bootloader/recovery it did pick the zip file. I waited for about mins and it said to press power button to restart and nothing changed tried a few times but nothing is happening. already run the fastboot oem lock command before doing all this. can i know what m i doing wrong? or can I have a exe file. thank u
Click to expand...
Click to collapse
You need htc_fastboot.exe to install the RUU zip.
Follow the steps as explained here but using your own RUU zip (skip that no.1) -
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Or if you prefer the exe method .. you can follow this - http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749
ckpv5 said:
You need htc_fastboot.exe to install the RUU zip.
Follow the steps as explained here but using your own RUU zip (skip that no.1) -
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Or if you prefer the exe method .. you can follow this - http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749
Click to expand...
Click to collapse
Thank a lot bro please help me out of a new problem, ur method worked completely fine . I successfully switched from custom to stock rom and then installed the updates available. Now i wanted to root so
I unlocked bootloader using htc dev
Started the phone and all the apps optimized which took around30-40 mins
Now i shifted to bootloader installed twrp then installed supersu which i had already put in extsd
Phone didnt started for an hour stuck on htc screen
Used adb reboot bootloader and repeated everything all again right from fastboot oem lock doing ruu and all still it is same
It works all very fine before installing supersu after that all chaos dont know what to do
hi, thanks for letting me join. if this is posted in the wrong place im very sorry. My HTC One M8 is secondhand and Ive had it for about 1.5 years now. the other day it crashed and ended up in a boot loop. i have tried lots of stuff but to no help. is there a way i can load stuff on to the sd card to fix it. on two occations it has got to the setup screen but errors would not let me type wifi password so had to hard reset.
ive tried hard reset
ive tried recovery
ive tried wipecache/factory reset
ive tried factory reset......seemed to work on two occations but on setup came back with sense input error and google error.
the phone had all the newest updates and was unlocked to any network.
on bootlader its says....SOFTWARE STATUS MODIFIED
LOCKED
SECURITY WARNING
THEN LOTS OF GREEN WRITING.
any help would be great. thanks
Post the result of fastboot getvar all ( after removing serialno and imei )
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
Post the result of fastboot getvar all ( after removing serialno and imei )
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
hi, im not sure if usb debug is on. will i still be able to get this info?
VMKDF said:
hi, im not sure if usb debug is on. will i still be able to get this info?
Click to expand...
Click to collapse
Yes
From fastboot mode ( no need for usb debugging )
Sent from my HTC M8 using XDA Labs
ahmed.ismael said:
Yes
From fastboot mode ( no need for usb debugging )
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
hi, im sorry but new to all this bootloader stuff. here is what i see on phone. ill google how to get other info when i get home. cheers
VMKDF said:
hi, im sorry but new to all this bootloader stuff. here is what i see on phone. ill google how to get other info when i get home. cheers
Click to expand...
Click to collapse
cant upload photo. ill try when i get home. cheers
VMKDF said:
cant upload photo. ill try when i get home. cheers
Click to expand...
Click to collapse
you can just copy and paste the result here
ahmed.ismael said:
you can just copy and paste the result here
Click to expand...
Click to collapse
C:\Users\User>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.203s
C:\Users\User>
VMKDF said:
C:\Users\User>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.203s
C:\Users\User>
Click to expand...
Click to collapse
You can follow this post instruction ( skip the part of relocking bootloader )
https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
easy way :
Download the RUU.zip from the linked post and rename it to 0P6BIMG.zip then put it in your external sd card root and reboot to bootloader ( hboot )
It will ask you to update confirm it and wait for a few minutes till it finish and ask you to reboot,that's it
Sent from my HTC M8 using XDA Labs
downloading it now..... will let you know. thanks very much for your time
VMKDF said:
downloading it now..... will let you know. thanks very much for your time
Click to expand...
Click to collapse
get this error
device halted due to large image update fail!
press <power> to reboot
then !!image update FAIL!! after the reboot
tried this too
i select recovery, then press power and vol up once to get to the menu with ....apply update from sdcard
install/sdcard/0P6BIMG.zip
finding update package
opening update package
verifying update package
E:footer is wrong
E:signature verification failed
installation aborted
VMKDF said:
get this error
device halted due to large image update fail!
press <power> to reboot
then !!image update FAIL!! after the reboot
tried this too
i select recovery, then press power and vol up once to get to the menu with ....apply update from sdcard
install/sdcard/0P6BIMG.zip
finding update package
opening update package
verifying update package
E:footer is wrong
E:signature verification failed
installation aborted
Click to expand...
Click to collapse
you can't flash RUU in recovery mode !!!!!!!!!!!
you tried to flash using sd card ( formatted as fat32 ) or the fastboot method ????
you said earlier your bootloader is locked
if it's unlocked relock it
Sir you are a GOD!!!!!!!! Phone is back to normal.
I followed your instructions and my M8 is now back to normal.
Thank you so much for your help and time. You saved my phone.
Thanks again
htc bootloader info
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.213311711.15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.31.425.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mels_tuhl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B6****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 438ab579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
bsikazinga said:
htc bootloader info
Click to expand...
Click to collapse
Bootloader info is great. But if you are asking for help, you really need to tell us more about what is going on with the phone. I gather from the subject of the thread, that your device is stuck in bootloader. But how did it get to that state? Did it just happen spontaneously (while using the phone, or when you tried to turn the screen on after idle for a while, etc.?). Or were you trying to do something, like unlock bootloader, install custom recovery TWRP, root, flash custom ROM, etc. Or some other function, like install an OTA update? If trying to flash something, provide exact details like version numbers, file names; as well as exactly what happened when you tried to install (changes to status of phone, error messages, etc.).
Have you tried anything so far to resolve the problem? If so, describe exactly what you tried, again with any applicable file names, version numbers, and outcomes (error messages, etc.).
The more specific details you provide, the better we can help you.
Stuck can't get phone to connect to PC
Hi, I have an HTC One M8 which I just got secondhand, it's stuck on bootloader screen, usual messages ('modified' 'locked' etc)... I followed the instructions for RUU flash on other posts and am all set to go, but annoyingly my phone will not connect to any PC I use....I have installed the drivers etc...I am well used to using ADB, just can't get the phone to be recognised.
I also can't boot into recovery, just ends up back in the bootloader screen again. If it does try and boot it hangs at the logo screen....
Would welcome some ideas on where to go next....
GitManMatt said:
Hi, I have an HTC One M8 which I just got secondhand, it's stuck on bootloader screen, usual messages ('modified' 'locked' etc)... I followed the instructions for RUU flash on other posts and am all set to go, but annoyingly my phone will not connect to any PC I use....I have installed the drivers etc...I am well used to using ADB, just can't get the phone to be recognised.
Click to expand...
Click to collapse
adb won't work in bootloader mode, by definition. You want fastboot for running RUU, which is related to adb, but with important differences.
As long as you are in bootloader-fastboot mode (fastboot is highlighted near the top of the bootloader screen) which is often default if phone is connected by USB, you should be able to use fastboot. Try the command:
fastboot devices
And as long as the phone's ID is returned, you should be good to go.
If the command just results in "waiting for response" or an error, try a different USB cable, or a different USB port on your PC.
Still no go... Tried connecting on different ports and with different cables but just doesn't seem to work. Best I've managed is with the Aruuwizard tool which seemed to connect but I couldn't get much further. If I run fast boot devices it returns no device... Just a blank line....
Hello. I have a similar problem with my HTC One Mini. It's stuck in fastboot mode and trying to reboot/boot into recovery or factory reset does nothing...goes black for a sec and then back to fastboot mode. Bootloader is unlocked and it's S-ON. Any help much appreciated! Cheers!
So my htc is 2 years old and it's starting to have some problems. Right now when I tried to restart it it just got stuck on the android logo. I've read a lot on the internet but since I am entirely new to this I decided to come here so i can get a valid answer on my current options. Do i have to use ruu to make it alive and if yes which version to download? Are there any there any other options? I got adb and fastboot on my windows. Right now the phone is connected to the pc with usb in bootloader mode. Here are some pieces of info about my phone
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Also , if i install the ruu, is there anything left to do after? or can i just reboot my phone and watch it open finally?
therzvsm said:
Right now when I tried to restart it it just got stuck on the android logo. I've read a lot on the internet but since I am entirely new to this I decided to come here so i can get a valid answer on my current options. Do i have to use ruu to make it alive and if yes which version to download? Are there any there any other options?
Also , if i install the ruu, is there anything left to do after? or can i just reboot my phone and watch it open finally?
Click to expand...
Click to collapse
You can try to do factory reset, wipe cache and Dalvik, all within bootloader/stock recovery. But if that doesn't help, we see a good amount of reports like yours, where it seems like the OS has been damaged or corrupt. In which case, simply doing factory reset or wiping cache, is not going to fix it.
In that case, RUU is certainly an option, and probably the easiest. The correct RUU for your device, plus instructions how to flash, can be found here: https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Once RUU is installed, nothing else to really do. Just boot up the phone (hopefully will boot to Android OS) and setup the phone again. Note that RUU will wipe all personal data on the phone.
Another option is to unlock the bootloader, flash TWRP, and install a stock TWRP backup (stock ROM) as outlined in the following thread: https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
But note that unlocking the bootloader also wipes all user data. So you aren't gaining anything with this method, and it is a significantly longer and more complicated process. So again, I think RUU is your best bet.