Hello, please help me. I cant access my recovery mode of my ZENFONE 2. firstly i rooted it using CWM. All went good. But when i tried to open the recovery mode after pressing power +vol up. the recovery mode was opening with Andy opened and lying down and the screen flashing an error. i thought flashing TWRP will be a good idea and it will work. From the PC side everything was good. The pc was showing that TWRP has been flased but when i tried again to open TWRP, by pressing the recovery mode from rectangular box at the top , TWRP didnt open. Even the recovery mode with error is also not opening. when i am selecting the recovery mode the BOOTLOADER is starting again and again . i neither cant access TWRP. i dunno if it has been flashed or not. I can see TWRP nowhere :/. please help me. how do i reach my recovery mode if it is not opening? And what is the problem with TWRP? is it flashed or not?? i dunno. i hope i have made my problem clear to you. Please help ASAP. plz help
same problem here
So, did you guys unlock your bootloader? Bet not...
For me, I'd flash back a stock recovery using fastboot and see if it works...
If you see the android lying on its back with error underneath when you go to recovery, then you need to hold power and press up volume key.
To replace stock recovery with TWRP you need to unlock your bootloader, this is also applicable if you want to flash a custom rom...
I'd suggest you go to general section, look for the stickied threads and do a butt ton of reading before you try doing this again...
Related
Can someone help please?
I was using the Venom ROM but decided I could not live with the battery life, so flashed the Revolution ROM. I must have installed something it does not like, so it is now saying Android.process.acore has stopped, and requires force close. I can sometimes get into Clockwork recovery but on selecting to flash a zip by pressing the power button the DHD boots up the ROM.
Is there a way to bypass having to use the power button?
Thanks
Alex
Whether the cwm recovery is touch based? If not try flashing cwm touch recovery or 4ext recovery or twrp recovery. With these recoveries you can select menu by touch no need of power button to select menu.
Thanks doesn't hurt....
ukmaps4us said:
Can someone help please?
I was using the Venom ROM but decided I could not live with the battery life, so flashed the Revolution ROM. I must have installed something it does not like, so it is now saying Android.process.acore has stopped, and requires force close. I can sometimes get into Clockwork recovery but on selecting to flash a zip by pressing the power button the DHD boots up the ROM.
Is there a way to bypass having to use the power button?
Thanks
Alex
Click to expand...
Click to collapse
Did You do a Clean install? If You didn't do a full wipe do that And then reflash The ROM, if You did, just boot into recovery And choose fixmpermissions from there To see what happens.
Yes use a touch recovery as suggested above
I don't seem to be able to do anything in recovery because of the power button starting the ROM.
Trying to get into the bootloader using adb on the PC doesn't seem to work either, as I'm not getting into fastboot, being unable to select it. I get device not found error in all the screens I can get to on the DHD.
Edit.
I've now, I think, got into fastboot by taking out the SD card and Sim card. I think the DHD knows it's in fastboot USB as this changes to fastboot as I put the USB cable in. However, I get no response to fastboot devices, and still device not found to USB reboot bootloader.
I'll keep trying, but not sure what else I can do.
Nightmare, but eventually managed to get into recovery and flash a new ROM by putting SD card in at the last minute.
After several attempts when the on/off button loaded the old ROM, got the recovery to work correctly, and the new ROM is flashed. adb now works as well.
Samsung galaxy tab3 the model number is SM-T211,When i try to go to recovery mode it just freezes at the samsung screen when I press the power button.volume up and home button and still it 's not going to recovery mode, I am trying to root the device I installed TWRP from this post http://forum.xda-developers.com/showthread.php?t=2386098, I was folling this guide http://forum.xda-developers.com/showthread.php?t=2525630,I used odin andput it on download mode it installed the twrp but now how do i root it since it's not going to recovery mode how do i fix these?
salza222 said:
Samsung galaxy tab3 the model number is SM-T211,When i try to go to recovery mode it just freezes at the samsung screen when I press the power button.volume up and home button and still it 's not going to recovery mode, I am trying to root the device I installed TWRP from this post http://forum.xda-developers.com/showthread.php?t=2386098, I was folling this guide http://forum.xda-developers.com/showthread.php?t=2525630,I used odin andput it on download mode it installed the twrp but now how do i root it since it's not going to recovery mode how do i fix these?
Click to expand...
Click to collapse
why no one replies to this?
salza222 said:
why no one replies to this?
Click to expand...
Click to collapse
To go Into recovery mode hold Home +Volumen up and Power button , when you see Samsung Logo hold only Home and Vulome up for the next around 20 sec that you See the recovery menu.
Please help me !
I have the same problem, I've took the steps to aquire recovery but nothing happens
On my 8.0 recovery is power+volume up, no home button. Don't know if that makes a difference or not.
Try downloading an app like " rebooter" from the play store. See if that will get u into it.
Also I use power/vol up to get into recovery.
Sent from my SPH-L720 using xda premium
Use the normal CWM
Sent from my SM-T211 using xda premium
I had the same problem, try this:
http://forum.xda-developers.com/showthread.php?t=2639423
Flash a recovery again. I have experenced this after i tried a wipe ， but when i flash the re again , the problem solved.
发送自我的 SM-T211 使用 Tapatalk
pengpengback said:
Flash a recovery again. I have experenced this after i tried a wipe , but when i flash the re again , the problem solved.
发送自我的 SM-T211 使用 Tapatalk
Click to expand...
Click to collapse
dude where can I get the recovery? please do share tge link ... I'm having the same problem!!
Hello,
I have a Samsung Galaxy Tab 3 Kids version (SM-T2105). It is only a Wifi tablet. I never rooted and USB debugging is not enabled (Keep this in mind). It is pure stock firmware. My 9yr old daughter has locked herself out. The Lock Screen password does not work. Because I can not gain access, I do not know exactly what firmware version it has or enable USB debugging (again - keep this in mind). The tablet will not boot to recovery mode, no matter what button combination I use. It only boots back to the Lock Screen. I tried in Regular Mode and Safe Mode. The only other mode that works is Download Mode (for Odin).
I am trying to do a Factory Reset, but I can not get into Recovery Mode. I tried flashing the stock firmware using Odin, but that does not work even after everthing PASSED with green lights (Odin 3.10.7). The tablet just reboots back to the same Lock Screen. Also, because the tablet is not enabled with USB debugging I can not do anything with ADB.
So basically I am stuck on the Lock Screen, and cant get into Recovery Mode in order to do a Factory Reset. Also, Odin flash is not working, even though everything says completed successfully. I have read in another post that other people are experiancing the same issue not being able to get into Recovery Mode (even when the tablet is not locked out and working fine). See this link:
http://forum.xda-developers.com/galaxy-tab-3/help/samsung-galaxy-tab-3-7-kids-t2105-t-t3294954
Can anyone help me. I beleive the tablet is stock in a soft brick that doesn't allow access to Recovery Mode. And the Locked Screen password is preventing me from getting into the table OS.
Any help would be greatly appreciated. And my 9yr old daughter will be happy again...
Thanks,
ggee
Hello,
I'm not sure which one of these did the trick for me, but I was able to get into recovery mode. I'm not sure if your three tables are rooted or not, but I don't think it matters. Try these two methods:
Method #1:
Technically, I think I just stumbled on to this one after successfully completing Method #2 (below). But it's worth trying it first before moving on to Method #2.
-Hold the Home + Volume Up + Power buttons together at the same time (just like the normal process).
-Now, you will probably need to try this next step a couple of time before you get it right. This is because it happens pretty fast and you need to time it perfectly.
-Notice that when the screen turns on, the actual first thing that happens is that the the screen backlight turns on and glows first. This happens first and a split second later the first Samsung logo flashes.
-You need to let go of all three buttons at the same time as soon as you see the backlight turn on, but before the Samsung logo flashes.
This is the sweet spot, and it happens pretty fast. But once you do it at the right time, the tablet will go black again and then the recovey mode will show up. It works for me every time.
Method #2:
I thought somehow the recovey mode portion of the firmware had become corrupter somehow. So I decided to flash a custom recovery using Odin (since at that time I hadn't stumbled onto Method #1 yet). Make sure to download and flash the CWM or TWRP .tar file for Odin (I personally have always liked CWM over TWRP).
-Make sure you have all the correct USB drivers for the tablet installed on your computer.
-Open Odin and load the .tar file that you downloaded into the PDA or AP slot (depending on your Odin version).
-Let Odin check the m5d verification for successful authorization.
-Once Odin is ready, then boot the tablet into Download Mode (Home + Volume Down + Power button)
-Connect the table to a USB cable that is attached to your computer's main USB port.
-Odin should now recognize that the table it connected to a valid COM port.
-Click <Start> button on Odin and it should flash the costum recovey .tar file pretty quickly.
-The tablet will simultaneously flash a progress bar and start to automatically reboot (also pretty quickly).
-Disconnect the tablet from the USB cable now.
If the tablet does not automatically reboot to the new custom recovery screen, then just power off the tablet completely. Wait 30 seconds, and then boot the table to recovery mode use the Method #1 shown above. You should now be able to go into the new custom recovery mode you flashed with Odin (CMW or TWRP). It should all work now.
From this point you can download and install SuperSU to add root (if you want to).
Let me know if this works for you.
ggee
Worked great thanks
galaxy tab 3 model GT-P5210 rebooting cant enter recovery mode what can i do i reinstall software it doese the same things need to fix it
Main information. F180, bootloader unlocked with teenybin, I'm on resurection lp rom.
Everything worked fine but I accidentally flashed the wrong file, now the phone is in boot loop. Though that is not the problem (I know how to fix it).
The problem is that there is no way I can access recovery. This happened to me before but I got lucky - computer detected the phone while it was in bootloop and I was able to use (adb reboot recovery). Next time I got lucky some kind of green screen showed up and from there I was able to go to recovery. Now i know that the most obvious way to go to recovery is through bootloader (vol up + power) but no matter how many times and in what diffrerent ways I try it I can't boot into bootloader it simply starts booting the rom... I am frustrated and have zero ides. Maybe you have some. Thank you in advance.
P.s.: i held down the power button for over 1 minute before attempting. And also download mode works.
If you can still boot into download mode you can try to flash the original firmware with the LG flash tool:http://forum.xda-developers.com/showthread.php?t=2797190
Don't worry you can use it for the LG Optimus G too:fingers-crossed:
Thank you for the idea, but I managed to solve my problem the same way as before. Use adb while the phone is in bootloop.
Hey All,
I have recently rooted my Xperia T2 with hopes of entering the wonderful world of customization. However, I cannot enter recovery mode at all. I have exhausted Google looking for a solution prior to registering here. I have tried everything from downloading apps such as Quick Boot to connecting to PC and trying the adb command ''adb reboot recovery'' and ''adb reboot-bootloader'' and of course I have tried the obvious of turning off the phone and then powering back on while holding the power button and volume up key at the same time. Performing that action shows the phone powering on with the Sony screen followed by a black screen where the phone vibrates 3 times and will continue in this loop if I don't release the keys, If I do release them the phone just starts normally. In all cases, that is is what is happening, the phone restarts and boots normally.
I have checked that everything is OK with the rooting that I did via the app Root Checker and and checked bootloader unlocked status via the command ''*#*#7378423#*#*''.
So, there you have it and I just can't understand why I can't enter the recovery mode. My main goal for the moment is to free up some RAM by doing the Link2SD method but without getting into the recovery mode, that seems hopeless.
Hopefully someone here can advise me.
Thanks for reading and have a great day!
I can't enter recovery mode too... also already unlocked my bootloader but recovery still unacessible.
See what I did:
(DONE) - Unlocked my bootloader;
(FAIL) - Tryed to root by using KingRoot (2 differrent versions, one that I saw in a tutorial and the newer version - cause I'm using the newer T2 Ultra firmware)
(FAIL) - Tryed to install a custom recovery and as a gift, my T2 started an infinite bootloop.
(DONE) - Fix the boot loop problem...;
(FAIL) - Enter recovery mode and flash a Pre Rooted Firmware;
(DONE) - Searching how to flash a custom recovery again...
(DONE) - Installed a custom recovery (TWRP)...
Now I have another problem... wen a I try to turn It on, It only goes to recovery, and the notification led blinks red and then purple. There's anything I can do to fix It?
The very same problem i am facing now
I wanted to upgrade to higher version of lollipop but not able to get in recovery mode though i have already rooted n installed NDR utils BUT not able to get in recovery mode even via app
Any one who can help US OUT ?? !
I have same problem i can't enter to recovery mode by hold power button and volume + or volume - i try a lot of other combinaison but it doesn't work , help us thanks
I know it's too late for a reply but if u still wandering for how to flash a custom recovery first you need to install one as our Sony phones doesn't come with stock recoveries as mtk and Samsung devices have. Now go to http://forum.xda-developers.com/t2-ultra/development/t2-ultra-xzdualrecovery-qa-t2823793 for Complete tutorial on flashing and downloading a custom recovery. I have installed it with no errors
Hi,
I need some help.
So i rooted my D855 G3 using the avioch's 1 click method.
I then flashed the TWRP recovery image on the phone. Now every time i try to boot to recovery mode , my phone shows a "boot certification verify error" in the top left corner and then goes to a black screen with the LED flashing blue and red.
I am able to get back into my regular phone OS , so its not bricked. I have tried several methods of getting into recovery mode (apps, holding power + vol down, adb)
Please can someone help me with this , ive read soo many threads but cannot find a straight answer on how to get passed the error
Thanks
krishin316 said:
Hi,
I need some help.
So i rooted my D855 G3 using the avioch's 1 click method.
I then flashed the TWRP recovery image on the phone. Now every time i try to boot to recovery mode , my phone shows a "boot certification verify error" in the top left corner and then goes to a black screen with the LED flashing blue and red.
I am able to get back into my regular phone OS , so its not bricked. I have tried several methods of getting into recovery mode (apps, holding power + vol down, adb)
Please can someone help me with this , ive read soo many threads but cannot find a straight answer on how to get passed the error
Thanks
Click to expand...
Click to collapse
have you try autorec for g3 in playstore?! that app let you install the TWRP without problems...try it...go to playstore and search for it, its a must have!
copy2050 said:
have you try autorec for g3 in playstore?! that app let you install the TWRP without problems...try it...go to playstore and search for it, its a must have!
Click to expand...
Click to collapse
Yeah i have tried that app before i flashed twrp...
I'm having the same problem. UK G3 D855 running 5.0
krishin316 said:
Hi,
I need some help.
So i rooted my D855 G3 using the avioch's 1 click method.
I then flashed the TWRP recovery image on the phone. Now every time i try to boot to recovery mode , my phone shows a "boot certification verify error" in the top left corner and then goes to a black screen with the LED flashing blue and red.
I am able to get back into my regular phone OS , so its not bricked. I have tried several methods of getting into recovery mode (apps, holding power + vol down, adb)
Please can someone help me with this , ive read soo many threads but cannot find a straight answer on how to get passed the error
Thanks
Click to expand...
Click to collapse
Same problem here my friend D855 stock rom 20i
Install TWRP Manager from the Play Store, and see if it recognizes that TWRP is installed. If not, you can use the same app to install the latest version 2.8.7.0
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
krishin316 said:
Yeah i have tried that app before i flashed twrp...
Click to expand...
Click to collapse
If it didn't work then you are not on stock rom or you are not rooted (or don't have supersu app)