Related
Having extensive experience with both phone watches and BT-enabled watches, I want to make an important remark to firmware/software developers for these devices, more so after having recently acquired a SONY Smartwatch.
It is simple: NOTIFICATIONS NEED TO BE PUSHED ALL THE WAY. ALL GOODS NEED TO BE DELIVERED.
In the Sony Smartwatch, a vibration accompanied by a Gmail logo is useless. Having me awake the watch, click on ‘Events’, click again on the message and only then being able to see the email message defeats the purpose of immediateness. Probably easier for me to reach out to the phone and see what the notification is about.
The right way to go is simple: everything the phone has in terms of message info needs to be pushed to the watch notification:
“Email from John Doe
To [email protected]
Subject: Dinner on Tue
->And the entire body”
Same with SMS, IM notifications, or anything. Having only the SMS or Gmail or Whatsapp logos and have to hunt down for the message in the watch is absurd.
The way the MBW-150 worked offered way more info at a glance; Sony is moving backward with this minimalistic notification approach. More is needed.
Secondly: let me disable BT on the watch (say when batt is low or overnight) without forcing me to shut down the device -> no time telling anymore.
Third: watch brightness needs to be adjustable from the watch itself (let me manage battery life myself, I’m a grown up).
Fourth: an audio beep won’t kill anyone. When I’m driving, for instance, I cannot feel the phone vibration. A CASIO-style ‘beep-beep’ cannot hurt. While I understand this may involve additional hardware and pose operational complexities, this is a nice-to-have feature.
First two remarks are KEY, and I’d appreciate not only Sony but everybody involved in such development to think a bit smart before pouring a fortune into development.
Anyone has anything else worth highlighting?
Thanks
Sure dude. But first things first... I would scream that let these things display the clock at all times. Failure to do so defeats the whole watch disguise!
Sent from my GT-N7000 using xda premium
Which app are you using to get Gmail notifications?
jairmoreno said:
Which app are you using to get Gmail notifications?
Click to expand...
Click to collapse
I am messing with Customnotifier, GMail notifier (not 2), and RSS (which works best but drains the battery on the phone if set to frequent checks).
In any event, on the watch I only get an icon on the screen, no further info.
Rgds
Well they are moving in the right direction. With the updated firmware, that was released today, you are able to do a couple more things. You now have an option of leaving new watch faces on at all times. Also with notifications, you can now single tap the new notification icon and it will take you straight to the notification!
gtdRR said:
Well they are moving in the right direction. With the updated firmware, that was released today, you are able to do a couple more things. You now have an option of leaving new watch faces on at all times. Also with notifications, you can now single tap the new notification icon and it will take you straight to the notification!
Click to expand...
Click to collapse
Yes indeed. Touchscreen seems a tad more responsive now also, more polished.
Still, notifications need to appear spontaneously -no need to tap- and bightness should be adjustable -too much backlight for me; always staying indoors.
But it's a good step fwd and the app in the phone is more efficient.
Hi, I'm Considering buying this watch simply cos I'm a geek I guess, but, if it is possible for sony to update the firmware/create new apps, and others also to create new apps etc, isn't it almost inevitable that more detailed notifications will be developed eventually? Or am I wrong, is it up to just sony to develope new apps etc, meaning we'll have to wait for just them to decide, taking ages etc? (Unlinke the wimm one for example)..
It does look great, but I agree, notifications really MUST include details, and if this is a future possibility, then I'll get one. (Mainly due to the wimm one not being on sale over here yet! Arrghh!)
jmpcrx said:
Hi, I'm Considering buying this watch simply cos I'm a geek I guess, but, if it is possible for sony to update the firmware/create new apps, and others also to create new apps etc, isn't it almost inevitable that more detailed notifications will be developed eventually? Or am I wrong, is it up to just sony to develope new apps etc, meaning we'll have to wait for just them to decide, taking ages etc? (Unlinke the wimm one for example)..
It does look great, but I agree, notifications really MUST include details, and if this is a future possibility, then I'll get one. (Mainly due to the wimm one not being on sale over here yet! Arrghh!)
Click to expand...
Click to collapse
The notifications seem detailed to me I mean you see the icon if you want to read the message tap the icon once. I like the screen always on update but I won't use it often since I rather have the battery last through the week.
I've checked back ever so often and there new apps popping up so I think development will only improve. Its honestly one of my favorite phone accessories I would recommend trying it out.
general forceps said:
Yes indeed. Touchscreen seems a tad more responsive now also, more polished.
Still, notifications need to appear spontaneously -no need to tap- and bightness should be adjustable -too much backlight for me; always staying indoors.
But it's a good step fwd and the app in the phone is more efficient.
Click to expand...
Click to collapse
I agree I can't wait til they update to allow adjustment of of the backlight. The notifications I find using the MMS notifier over Sony's I get no delay in the notifications. The Gmail notifier app I use for Gmail sends me the notice without delay also.
Have you looked at the Metawatch at all? That ended up being my choice. Waiting for delivery.
RedRamage said:
Have you looked at the Metawatch at all? That ended up being my choice. Waiting for delivery.
Click to expand...
Click to collapse
Good choice RedRamage. I have the analog Metawatch and expect the new iOS digital version any day. Latest phone console release and functions here
OP - fullly agree with the "at a glance" concept. Metawatch provided this for me and I have the Sony, WIMM, original Liveview and MotoACTV also.
Only very recently I was able to stop using MetaWatch and switch to the Sony only for this. See my blog @ augmentedtraffic.wordpress.com/2012/06/09/finally-true-real-time-at-a-glance-notifications-on-sony-smart-watch (you need to cut & paste into a browser since I have < 10 posts).
I use Tasker/K-9 combined with my app to get "at a glance' on a SonyWatch!
I am still testing battery life, but it seems OK. I haven't put the app on the market as yet as it is very customized to my use cases and it may be a bit too much for others to use. The only thing I am currently missing from the MetaWatch is the next upcoming appointment. I have everything else I was using (notifications at a glance, phone battery life, location, weather). I even added my last Withings scale weigh-in
Ok, I've got both of the 1st Gen MetaWatch models (The bt2 Analog and Digital ones), and maintain a popular fork of the Android MW software (see link in my sig), so I'll try and answer your points in relation to that watch.
1) Yes, MW will display your notifications as soon as the phone does - gmail is a little tricky as google keeps changing/modifying/revoking permissions with the official gmail app, so the information available to the watch manager app can be a little sketchy. If you use k-9 mail, you'll see the sender and subject. It doesn't display body text yet, but that is doable. Gmail would also be fixable by just making the app go to the gmail server directly and pull the message text when the new mail notification comes in.
The fork I maintain has an "Other notifications" Option, that lets you selectively display any android notification, although the OS limits how much information we can actually pull. If anyone has requests for additional notification support, then I'm happy to try adding it, assuming the developer of the app has provided intents or an api to access that information.
Currently notifications will stay on screen for a few seconds, then disappear (except for the SMS notifications, which, on the digital watch can be set to stay on screen until dismissed, as you can see the full body, and scroll) - On the digital watch you can configure a button to redisplay the last notification again if you missed it, and there's an on watch menu of all the previous notifications which is only a few button presses away.
2) Yes, all the MW models have a menu option (on the watch) that let you disable BT without turning off the watch, so you can still tell the time
3) Yes, the Analog MW model has menu options to configure the OLED brightness. There's nothing to configure on the Digital model, as it has an always on LCD screen (though there's an option in my fork of the app to automatically turn on its light when a notification comes in)
4) The MWs don't have a speaker, but they do have a powerful vibrator inside - it's pretty hard to miss it when it does vibrate, and the app lets you configure different vibration patterns for different notifications, so you can know what sort of message it was without even looking.
Let me know if you've got any other questions!
MW has some very good stuff, I'm quite familiar with it.
Pity -both for MW and SW- is the poor pixel density. I believe MOTO has a much better display.
B/W displays appear sub-optimal to me and definitely not the direction the market wants to move toward.
Also, beyond the immediate 'at-a-glance' notification, can you read within the watch the full email or notification in MW? This is also a key element.
One more topic I missed on SW is that once connection is lost we need not only vibration but some on-screen display, like a warning sign or something. This feature prevented me from leaving behind a SGSII in a bar when I was using my ancient MBW-150. Vibration won't typically suffice.
I survive 2.5 full days with heavy notification traffic with my SW. How long you stay unplugged with MW under heavy traffic?
Thanks for the good discussion.
general forceps said:
Also, beyond the immediate 'at-a-glance' notification, can you read within the watch the full email or notification in MW? This is also a key element.
Click to expand...
Click to collapse
As I said, the current software doesn't support that, but it's something I'm planning on adding.
SMS messages currently support this - you can page through a long message, then dismiss it when you're done, so I just need to add the code to pull out (and strip html from) the body text - I know for certain that it's easily possible using k-9 mail, gmail will probably need work to talk to google's mail server directly to get the message text.
general forceps said:
One more topic I missed on SW is that once connection is lost we need not only vibration but some on-screen display, like a warning sign or something. This feature prevented me from leaving behind a SGSII in a bar when I was using my ancient MBW-150. Vibration won't typically suffice.
Click to expand...
Click to collapse
Yes, it'll display a "No watch connection" icon in the top right of the time display, which is pretty hard to miss!
general forceps said:
I survive 2.5 full days with heavy notification traffic with my SW. How long you stay unplugged with MW under heavy traffic?
Click to expand...
Click to collapse
I tend to get 2 or 3 days, depending on what I'm doing - 3 days for medium traffic, 2 for heavy traffic (usually when I'm developing features, so pushing lots of data to the watch)
3 days = Taken off the charger on Monday morning, needs to go back on the charger Wednesday evening before I go to bed.
I could probably get much longer battery life if I manually turned bt off each night, and back in the morning, but I like having my watch vibrate in the morning when the alarm goes off! Perhaps adding a "bt sleep" mode to the firmware would be a good addition.
How long does your battery last on the Sony Smartwatch if you keep the small digital clock on at all times?
I've had my watch a little over a week and haven't been able to make it through the day yet even with minimal notifications. The battery life has been very disappointing.
@benjymous:
I forgot to note that I shut it down when I go to sleep. In the morning I turn it on with no pairing issues, so we'd be looking at 18h/day actual uptime, for a total of say 45h per charge. Not stellar by any means.
@tjrhine:
It didn't even cross my mind to have the screen on full-time. It is obvious you won't make it tremendously far (I think the bat has a capacity below 130). No way. I push the button to get the time, I can live with this.
I also need to report that the glass is far from scratchproof. That's something that really pisses people off. Next HW release should DEFINITELY include at least Gorilla Glass and certainly a bigger battery. The thickness of the plastic clip and the strap can be each reduced by about half a millimeter that combined gives you 1mm that they should invest in a bigger capacity batt.
And obviously, a standard usb port.
Please keep ideas coming folks, thanks.
And this is how the notification queue should look like:
http://www.slashphone.com/media/data/767/inPulse_SmartWatch-2.jpg
I'm having exact same problem - Battery lasts barely 8-10 hrs. Do we need replacement watches?
general forceps said:
And this is how the notification queue should look like:
w ww.slashphone. com/media/data/767/inPulse_SmartWatch-2.jpg
Click to expand...
Click to collapse
Looks like chinese product
The software seems a bit flaky. New SMS does not display message details......still investigating
I eventually managed to download music tracks to the device and they played okay over bluetooth headphones. Not tried the GPS yet
Any questions I will try and answer
tmn0004676 said:
The software seems a bit flaky. New SMS does not display message details......still investigating
I eventually managed to download music tracks to the device and they played okay over bluetooth headphones. Not tried the GPS yet
Any questions I will try and answer
Click to expand...
Click to collapse
Can you run my tracks via the start on the phone (offline mode) that used watch GPS and let me know if the music stutters? It seems to happen when bluetooth and internal GPS are enabled...im on 2nd device and same issue
download my tracks to phone, then go to apps on watch and run that app, then start music via watch memory
gs05 said:
Can you run my tracks via the start on the phone (offline mode) that used watch GPS and let me know if the music stutters? It seems to happen when bluetooth and internal GPS are enabled...im on 2nd device and same issue
download my tracks to phone, then go to apps on watch and run that app, then start music via watch memory
Click to expand...
Click to collapse
please could you provide more detailed instructions
thanks
tmn0004676 said:
please could you provide more detailed instructions
thanks
Click to expand...
Click to collapse
Sure...
Download My tracks (google) from play store. Get google music (if not already) and download some songs to your watch...do this by downloading to your phone first (offline) and then selecting in music options to download to android wear. Let a few songs load over.
Go outside. Go to the watch (make sure far from phone and disconnected). Start tracks with the start menu. Then do start on that
Now do play music from the same menu as start.
Go for a jog
OP's can help us all (please; this is a suggestion not a criticism) by listing what they are pairing with :good:
Sent from my D6653 using Tapatalk
I've had mine since Friday. Have you found any way use the running apps without the phone and use the watch gps? I bought this to replace my motoactiv but stava and runtastic won't allow me to start a run without being connected to the phone.
oddoreven said:
I've had mine since Friday. Have you found any way use the running apps without the phone and use the watch gps? I bought this to replace my motoactiv but stava and runtastic won't allow me to start a run without being connected to the phone.
Click to expand...
Click to collapse
I have the same problem.. Nothing uses the watch GPS that I have found. Also is your screen yellow when it should be white. Mine is terrible.
runningwarrior08 said:
I have the same problem.. Nothing uses the watch GPS that I have found. Also is your screen yellow when it should be white. Mine is terrible.
Click to expand...
Click to collapse
Download google tracks to your phone.
It will work in offline mode and give you distance and time via the watch GPS. Start it via the start menu and select tracks. The running apps are still through the phone currently.
gs05 said:
Download google tracks to your phone.
It will work in offline mode and give you distance and time via the watch GPS. Start it via the start menu and select tracks. The running apps are still through the phone currently.
Click to expand...
Click to collapse
It didn't work for me yesterday when I tried during my run. Started it from the watch when I was not with my phone and the distance just stayed at 0
runningwarrior08 said:
It didn't work for me yesterday when I tried during my run. Started it from the watch when I was not with my phone and the distance just stayed at 0
Click to expand...
Click to collapse
Give it a minute and you should see a little location google stake on the top left. It worked for me and i could see my entire mapped run via tracks afterwards. Make you start it, give it a minute and then try. It took mine about .15 of a mile to kick in
You can also go into GPS test under Settings- Developer options - manufacturer - GPS and press start to check time to first fix.
runningwarrior08 said:
I have the same problem.. Nothing uses the watch GPS that I have found. Also is your screen yellow when it should be white. Mine is terrible.
Click to expand...
Click to collapse
I just got mine today. The screen definitly has a yellow tint to it. Can othere people please test this?
Did you replace it?
bookat said:
I just got mine today. The screen definitly has a yellow tint to it. Can othere people please test this?
Did you replace it?
Click to expand...
Click to collapse
I don't think this is a defect. It is the trade-off for the tft tech making it fully daylight readable. Mine also has this. I'm torn on the trade-off, on the one hand, it is leagues better than even the moto 360 for reading in direct sunlight (it's almost like a mirasol display), but on the other, the 360's screen was very pretty. I'm leaning towards being "ok" with it, since I don't think I'm going to watch any movies on my wrist, but I will probably want to deal with notifications in unideal lighting, but it is definitely an adjustment.
I don't mind the yellow. Its actually not that bad and the screen is definitely visible in the daylight. I am really liking this watch alongside with my Microsoft Band.
legend921 said:
I don't mind the yellow. Its actually not that bad and the screen is definitely visible in the daylight. I am really liking this watch alongside with my Microsoft Band.
Click to expand...
Click to collapse
How is the health tracking on the band? This watch has some great features, but none of the android wear watches do true health tracking very well yet, and even if it had a heart rate monitor, I've been unimpressed with the ones on the 360 and gear live, so I've been thinking about adding something purely for the health side of things.
Khidr said:
How is the health tracking on the band? This watch has some great features, but none of the android wear watches do true health tracking very well yet, and even if it had a heart rate monitor, I've been unimpressed with the ones on the 360 and gear live, so I've been thinking about adding something purely for the health side of things.
Click to expand...
Click to collapse
The band is great. Its not big and it definitely doe fitness better than the Android Wear. The 24/7 heart rate tracker gives you a better count on how many calories burned, and the only feature that you lose when not using the Windows Phone is Cortana. When I was using it on the 5K run that I had participated with the GPS on, the band was able to tell me where I was running fast and where I had slowed down and so fourth and it was very accurate along side the path that I was running on. The 5K reported that the run was 3.2 miles which was pretty dead on to the 5K. The pedometer is more accurate too compared to the android wear since mine will count steps even if I am pushing a shopping cart so all in all I really like the band for fitness with smartwatch duties as secondary. I can read everything just fine from the notifications when not using the Smartwatch 3, but at least now I can let the band do all my fitness stuff when I go on the run and have the Sony Smartwatch stream my music for me to run with. That way I don't have to carry the phone.
Thanks for confirming this. I guess there is no perfect solution out there for smart watches yet. The screen does bother me some times specially because i had the moto 360 and returned it. but that watch had its own set of problems.
guess i will be keeping this.
From the patent at http://www.google.com/patents/US8208104
It states "a change in chromaticity caused by wavelength dispersion due to the λ/4 plate."
---------- Post added at 08:15 PM ---------- Previous post was at 08:13 PM ----------
As for on device tracking I hope that Sony and others will include support for just released google fit api on device.
My screen shows whites correctly. I don't see the yellowish problem here.
My screen is unimpressive (pale, low contrast) but OK. A colour tinge is normal for a transflective display, and it depends on the colour of the light you shine on it...the nice thing is that I can read it without the backlight in most situations.
What bothers me is, that some things that work on Google Now on my phone don't work via Wear Voice input. Setting alarms for example. It works fine on my phone, but not on my SW3. Why? On the Watch it always understands, but then just throws up a web search card...
Also, the "wrist flick" to activate the display is a bit weird. It works about 1 time out of ten, but if I just move my arm around randomly, then I often trigger the backlight. That's also a bit weird. I'm trying to get used to it. With my Pebble, I mostly just glanced at the watch without moving it in front of my eyes. That worked fine. I had actually turned off the auto-backlight on Pebble and would probably do the same on the SW3 if I could.
The most annoying thing is the weak vibration of the SW3. With my Pebble, I feel (and hear) the vibrating alert, with the SW3 I miss it frequently even when I'm not moving around. That's unacceptable and might be the main reason for sending it back. I haven't decided yet.
Is there a way to increase the vibration intensity and length? That would be cool.
And one last thing, not directly related to the SW3...On my Pebble I get notifications for every email in my Gmail account, apart from SPAM. With Android Wear, I think not all labels are signalled. How do I change that? I tried to set it up in Gmail, but I think I still don't get all emails announced on the SW...
Howdy everyone,
I just purchased a Huawei watch that I'd like to use to replace my FitBit plus lots more that you can do with Android Wear.
Odd thing that I'm dealing with is that the watch and phone are reporting wildly different steps - it appears that Google Fit on the watch and Google Fit on the phone are not communicating.
I have looked at the Google Fit Connects Apps -> Google Fit apps & devices, but do not see the Huawei watch listed - if the watch is connected properly, should it show up here? If it is supposed to be listed to connected Google Fit properly, how do I make that happen?
Thanks.
Which app is set to count your steps in the actions menu?
Android Wear App -> scroll to the bottom -> More Actions -> Show me my steps -> Fit
Good question. Ive been thinking about this. Given that Fit is on the device and the Huawei fit app is also there, which app gives the better stats, as they show different step counts. Also, if you are using the Google Fit app, is that only counting steps when you have your phone on you, or does it count steps when you leave your phone on your desk?
Edit:
Just tested it and it appears as though Google Fit uses the watch to calculate step data as I left my phone on my desk and went for a walk, and the step count increased.
I have the same problem i was expecting the watch would be connected to the phone app but it doesn't look like it. So what happens when i start one of the predefined activities on the phone such as stationary bike the watch is not doing anything. I can only start tracking from the native wear app which has very few predefined tracking types. Is there any solution to this?
Not sure if this is a common bug or not - if I do NOT have Fit installed on my phone, fit tracks steps on my watch fine, but if I install Fit on my phone, it just reads zeros for current activity on the phone and the watch.. but if I uninstall Fit on the phone, it seems to work fine on the watch. Trying to figure out if it's a phone or watch issue. I did give it permissions to read sensors on both phone and watch on install
Same issues
Google fit did not record steps on my gen 1 Moto 360. I just bought the Huawei Watch as a replacement and fit still does not record steps. The Huawei app works great. I am at a loss on how to get this working. I can't believe it does not work at all. There has to be a setting issue but I have yet to find it.
Update: I have Fit working pretty well now. (have to go back and change my rating of fit from 1 star to maybe 3 ) Here is what I did:
- Deactivated Fit on my phone and deleted all the data. Then I reactivated it.
- I went into the Wuawei fitness app and connected it to Fit. There was not an option to do it the other way. But after I connected it it shows up in connected apps in Fit.
- Everything pretty much started working after this. One thing to note: Everything does not sync automatically. I have to open my Wuawei fitness app on my phone and update it before those steps seem to show up in Fit. So, it is not perfect but it is close.
Old thread but if you guys are still having the same issues with Huawei Watch and Google Fit, please join this thread and submit a bug report. https://issuetracker.google.com/issues/77606997
hello
Yesterday i installed google fit on my galaxy s6 and moto 360 gen1
But i have problems with it. i have set activity detection to on and body sensor on.
But what the problem is is that you need your phone in your pocket or it doesnt register steps.
So if i only have my watch on me and not my phone there are not counted any steps.
Then the second problem is that if i want to start an exersice like running it says enable gps on phone. But i dont want to bring my phone with me while running.
The third and final problem is that the heart rate doesnt work automatic it only putts it in the graph when i start the heart rate sensor myself. but it doesnt measure it like every hour
Hope someone can help me with these problems.
someone?
You will need to ensure that MotoBody on the 360 has access to sensors. It does not matter if you intend to use MotoBody or not - I went through the same behavior and in discussion with the Google Fit team, this was their resolution to my issue.
sfringer said:
You will need to ensure that MotoBody on the 360 has access to sensors. It does not matter if you intend to use MotoBody or not - I went through the same behavior and in discussion with the Google Fit team, this was their resolution to my issue.
Click to expand...
Click to collapse
well the moto body app is counting the steps. but it is not getting updated in google fit
No, you do not need to install Moto Body on your phone.
Moto Body is already present on the Moto 360 and you simply need to navigate to the permissions section of the settings app, choose Moto Body and ensure Sensors are enabled.
sfringer said:
No, you do not need to install Moto Body on your phone.
Moto Body is already present on the Moto 360 and you simply need to navigate to the permissions section of the settings app, choose Moto Body and ensure Sensors are enabled.
Click to expand...
Click to collapse
i have done that now the moto body app on my watch says i have done 101 steps but google fit still shows the same apps as before. i did grant permission so moto body could look into my sensors
It may take a few minutes for Google Fit on the 360 to start registering steps. This is the process I took per guidance from the Google Fit devs. Here is the reply from that email exchange:
"Thanks for the bug report. Could you try enabling moto body permissions, by opening the moto body app on the watch?
Enabling permissions should trigger the moto body app to start recording steps, and these should be reflected in Google Fit."
Click to expand...
Click to collapse
Once I performed these steps I have not gone back to making use of Moto Body. Are you using one of the Google Fit watch faces to track steps or just launching the Google Fit app on your 360?
sfringer said:
It may take a few minutes for Google Fit on the 360 to start registering steps. This is the process I took per guidance from the Google Fit devs. Here is the reply from that email exchange:
Once I performed these steps I have not gone back to making use of Moto Body. Are you using one of the Google Fit watch faces to track steps or just launching the Google Fit app on your 360?
Click to expand...
Click to collapse
i use an google fit watch face but there is not chaning anything when i look in the moto body app just to check it it counting steps but no steps in the google fit app.
sfringer said:
It may take a few minutes for Google Fit on the 360 to start registering steps. This is the process I took per guidance from the Google Fit devs. Here is the reply from that email exchange:
Once I performed these steps I have not gone back to making use of Moto Body. Are you using one of the Google Fit watch faces to track steps or just launching the Google Fit app on your 360?
Click to expand...
Click to collapse
EDIT: The watch it counting steps now when i leave my phone on my desk. but when i get back and the watch reconnects to the phone the steps wont update on the phone. so the phone says 8500 steps while the moto 360 says 8600 steps for example. and after 5 minutes or so my watch also says 8500 steps again. so the phone overrides the watch
Glad to hear it's finally counting steps on your 360.
As for step sync between the 360 and your Galaxy S6, I don't have any insight there other than I've noticed that step count syncing is never instantaneous (and even slower to the Fit website).
sfringer said:
Glad to hear it's finally counting steps on your 360.
As for step sync between the 360 and your Galaxy S6, I don't have any insight there other than I've noticed that step count syncing is never instantaneous (and even slower to the Fit website).
Click to expand...
Click to collapse
Thanks but it is not synching at all.
When the moto 360 has an higher value then my phone the watch sets the stepcounter back to the count that is on the phone.
I've not encountered the issue you've described so I'm not certain what steps you could take to correct the issue.
You could try submitting an issue in the Google Fit community on Google+.
sfringer said:
I've not encountered the issue you've described so I'm not certain what steps you could take to correct the issue.
You could try submitting an issue in the Google Fit community on Google+.
Click to expand...
Click to collapse
i did that but now response yet
thebest07111 said:
i did that but now response yet
Click to expand...
Click to collapse
Did you get a response? I am having the exact issue after bring my moto 360 from beyond the grave.
Any update on this? Having same problems with my moto360
Just got myself a GT 2 - love the hardware and just hope I will be able to live with the software. There are a few thing I haven't found, can you please let me know if I'm missing something?
Is there no way to adjust the step goal per day? It is set to 10.000 steps and I want to change it.
Can't I receive notifications while in the workout mode, like a walk och running?
If I get a notification on my phone and delete it from the phone it is still visible on my watch. And if I delete a notification on my watch it is still visible on my phone. This can't be right?
Is there no way to see coming calendar entries?
I got a Gmail but could only see the subject and sender, nothing of the content?
Is it likely that more features will be added, maybe when GT 3 is released?
After an update incomming phone calls do not show up on my watch. And in the list in the Health app I can no longer enable notifications from "Phone". Anyone else with this issue?
Would really appreciate if someone could comment on the above.
Thanks a lot!
You're right, hardware is great, software is limited.
#1, change step goal in Health app on phone (settings, goal).
#2-5, unfortunately correct.
Having said that, I'm wearing this watch since December, day and night, only taking out during shower. I have latest Samsung watches, have few Wear watches, like all of them, but GT2 just looks great and does just enough job (tell time and show notifications). I've loaded multiple custom watches and love it.
ddavtian said:
You're right, hardware is great, software is limited.
#1, change step goal in Health app on phone (settings, goal).
#2-5, unfortunately correct.
Having said that, I'm wearing this watch since December, day and night, only taking out during shower. I have latest Samsung watches, have few Wear watches, like all of them, but GT2 just looks great and does just enough job (tell time and show notifications). I've loaded multiple custom watches and love it.
Click to expand...
Click to collapse
Thanks @ddavtian! I have been through every single menu without finding step goal, can you please help me find it? I consider myself as a "power user" so this is really embarrassing
Health app: Me, Settings, Goal
There you can set weight and steps goals
6. I do jot think so.
7. What firmware version are you on? Did incommig call work correctly before update?
bokyfly said:
Health app: Me, Settings, Goal
There you can set weight and steps goals
6. I do jot think so.
7. What firmware version are you on? Did incommig call work correctly before update?
Click to expand...
Click to collapse
Wow, that one wasn't there until I switched to English language on my phone. Now it was there and I could finally change it. What a bug
Regarding incoming call I cannot even find "Phone" under notification settings in the long list of all available apps. It worked just fine when I got the watch a week ago. Do you have "Phone" in the app list in the Health app under "Notifications"?
Firmware: 1.0.6.32
Health app version: 10.0.5.317
No, if you gave Health app permissions, it will do its work, no need for separate settings, just watch needs to be connected to phone via bluetooth.