Develop Bugs

[Q] Can't hard reset Xperia PLAY and isn't detected by flash tool

I had LauncherPRO, I tried switching wallpapers and everything froze so I did a battery pull and now it gets stuck on the "ROGERS" boot up screen or goes to a blank and no keys work. If I slide out the gamepad while its blank, the screen will turn on and it'll be a black screen with the time and the slideout bar but the touch screen doesn't work for some reason. It also says I have no service.
Here's a list of what I've tried so far -
- Holding the left and right D-Pad keys while starting the phone
- Holding the back and search button while starting the phone
- Using Sony Ericsson Update Service but it won't even detect it
- PC Companion won't detect it either
I've had so many problems with this phone, I was hoping to exchange it for a different phone if possible. I got it from Rogers on May 30th, and I didn't really realize it had problems till this month. Thing is, I have installed APK's from 4shared that you'd normally have to pay for and since it seems to be bricked now, I don't know if it's safe to bring it in.. It's not rooted. I'm pretty sure most of my downloaded apps were on my SD card but I"m not 100% sure. The phone isn't functional at all if I manage to get it to that black homescreen.

As simply as flash with flashtool.
All you need is in the dev forum.

Alejandrissimo said:
As simply as flash with flashtool.
All you need is in the dev forum.
Click to expand...
Click to collapse
Thanks for the reply. This won't void warranty, right?
Edit: Flashtool doesn't seem to recognize my Xperia PLAY when I boot it in flash mode. The green LED is lit, and it shows a battery logo when I start it up so I assume that means it's in flash mode, but flash tool wont recognize it. I've tried on a windows 7 and a windows vista computer

BlueLemming said:
Thanks for the reply. This won't void warranty, right?
Edit: Flashtool doesn't seem to recognize my Xperia PLAY when I boot it in flash mode. The green LED is lit, and it shows a battery logo when I start it up so I assume that means it's in flash mode, but flash tool wont recognize it. I've tried on a windows 7 and a windows vista computer
Click to expand...
Click to collapse
Did you install the gordons gate drivers that come with flashtool??

AndroHero said:
Did you install the gordons gate drivers that come with flashtool??
Click to expand...
Click to collapse
I didn't before but I did just now, no difference. Are there Xperia PLAY gordon gate drivers I need to install?

Are you using flashtool 2.9.1?
Sent from my Xperia PLAY R800i using XDA App

Cat_On_Droid said:
Are you using flashtool 2.9.1?
Sent from my Xperia PLAY R800i using XDA App
Click to expand...
Click to collapse
I am, yes.

I read somewhere that problems with pc companion not regonizing the play can be resolved by umounting the sdcard and then conecting it to pc companion again.
Regards Dousan...

Dousan said:
I read somewhere that problems with pc companion not regonizing the play can be resolved by umounting the sdcard and then conecting it to pc companion again.
Regards Dousan...
Click to expand...
Click to collapse
Just tried it after restarting my computer, still no luck but my PC Companion seems to start up everytime I plug it in while booting in flash mode.. which is odd
Edit: Nevermind, it's detected it now. Thanks!

i read that you said the battery logo shows up. that's not flash mode. you enter flash mode by ONLY holding back and plugging in USB cable. but i see you solved it now.
Sent from my R800i using XDA App

Blagus said:
i read that you said the battery logo shows up. that's not flash mode. you enter flash mode by ONLY holding back and plugging in USB cable. but i see you solved it now.
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Yeah before I had read that it was different for Xperia PLAY, that you had to hold search. Since before I wasn't holding the "back" button long enough and I didn't think it was working. Anywho it's all fixed up now! This doesn't void warranty right?

Just wanted to add as i just spent hours figuring this out and its really stupid and simple but may help other people. When you connect the phone in flash mode. Connect it in FLASH mode. Do NOT hold the search key button as this is for FASTBOOT MODE. You need to hold the back button on the Xperia play to launch into flash mode instead.
Hope this helps someone =)

Apologies for the necro, but just in case anyone else is having this problem and comes here.... i spent an hour reinstalling drivers, holding different keys without flashtool detecting the phone in flash mode & searching through vaguely related results in google.
In the end nothing was wrong, I was plugged into usb 3.0 and whilst the drivers were installed and the device was showing up in device manager, flashtool simply wouldn't detect it. The moment it was connected to a usb 2.0 socket it immediately worked.

HELP!
Deagon said:
Apologies for the necro, but just in case anyone else is having this problem and comes here.... i spent an hour reinstalling drivers, holding different keys without flashtool detecting the phone in flash mode & searching through vaguely related results in google.
In the end nothing was wrong, I was plugged into usb 3.0 and whilst the drivers were installed and the device was showing up in device manager, flashtool simply wouldn't detect it. The moment it was connected to a usb 2.0 socket it immediately worked.
Click to expand...
Click to collapse
My Xperia Play is not being recognised by the FlashTool (I've installed the Gorgon Drivers and it is detecting as ZEUS USBFlash...). It is not responding, I tried pressing the search button, the back button, but I got nothing. I am not getting any light neither. Do any of you have any idea about what I could be doing wrong?
Thanks in advance

Stuck on SONY logo

Hey all,
Yesterday I was about to flash a new ROM on my wifes Xperia S. She had an old ICS rom and I decided to go for the PAC MAN JB 4.2.2 ROM. Seemed ok.
I own a SGS2 myself so I consider myself a total noob when it comes to the Sony.
I know CWM works on on the XS and I am pretty sure I installed it when I romed it last time. Although I didn't remember how to enter CWM mode so I installed it again through that .bat file that comes with it.
I downloaded the ROM and the GAPPS and copied both to the phone. And now I thought I was set and went for it. Of course I did a Nandroid backup before and also from within the phone a full backup in Backup & Restore. Bootloader is unlocked by the way.
So now I boot into CWM and I do a full wipe/factory reset. I clear the cache and dalvik and also I format the system as he guides us to do in his installation video.
I then installed the rom or at least tried. Got the status 7 together with some error I can't remember.
I read then that people had issues downloading the rom with google chrome which sounds pretty far fetched but I decided to do what other did and downloaded the rom from firefox.
Then within CWM I thought to start the USB and copy it directly in CWM since I already had reset the phone and didn't want to go through the "new phone" routine. But the USB in CWM didn't work so I had to restart the phone.
It then got stuck on the initial SONY logo screen and I'm stuck there now.
I have installed the Flash tool from SONY coz I read in another thread that the only way out is to install stock rom. However when I connect the phone holding volume down windows 8 always say that the USB device is not recognized. I have of course rebooted the PC after.
I'm going to try this on my Windows 7 PC as well later after work but I dread I will be stuck there as well.
Can anyone shed some light on how I can get my wifes Xperia S to be recognized by her Windows 8 laptop? Or have I bricked her phone?
I have thought many times that I bricked my SGS2 but always came out on top, I don't want to lose this battle either.

if it says "Unknown Devices" when you plug the phone to the computer, try change an USB line or change a computer
if it says "Unable to install the driver" or another something like this when you plug the phone to the computer, try install the Flashtool driver
...any screenshots?

Windows 8 gives a balloon tip saying exactly "USB Device not recognized". And I did install the Flashtool to get the driver but I guess I still miss the correct driver here.
I will do some more troubleshooting after work. I just thought maybe someone had similar problem and had a quick and easy solution.

It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app

Gripa98 said:
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?

Ok I actually managed to get it connected on my Windows 7 PC.
I installed Emma (Flashtool) and it installed something but I'm not sure really what happened to be honest. Light on the phone was green and it installed 4.0.4 ICS.
It was a success after about 217 seconds but after that the phone didn't do anything. Stayed with green light and when I disconnected it it could not be started at all.
Maybe it doesn't have enough power to start up. It is on 220V charge now so lets see what will happen with it.

Bergaliden said:
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Click to expand...
Click to collapse
I just installed pc companion
Sent from my LT26i using xda app-developers app

Good news y'all.
All it needed after using Emma was some juice. Now it is back to it's normal self. And I'm not going to ROM it anymore. Soon JB will be officially out for XS.

True!! When I was a noob, I tried to flash cyanogrnmod on my galaxy ace (it was a year ago) and I stuck in bootloop. Idk what to do and I regret it, from that day I never flash any rom. But this year I flash xzxperience on acro s and it works but not so happy and then I flash stock firmware to normal. And I regret because i ve unlocked bootloader!! And now BE is not working anymore.
Sent from my LT26w using xda premium

lg e975 stuck in clockworkmod boot loop

I recently installed miui from official website for lg e975. My phone is lg f180 so they both are same.
It was working fine till this morning it asked for update. I allowed. It retarted and now it starts shows google logo. Then goes to recovery.
I flashed my original backup rom. Then even flashed miui rom. Nothing changes. I wiped cache. Data dalvik a lot of times.
It just starts shows google logo. Goes to recovery. Please help
Im sorry if this thread doeant belong here. Mods please move

Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well

awais3344 said:
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
Click to expand...
Click to collapse
Flash stock zip kernel from artmod thread.

the problem is. I can't upload any files to mobile phone. if i connect to pc, it turns on, goes to recovery, so I click on mount storage, and other mount option, nothing happens. My computer detects phone as F180L with a exclamation mark.
If i go to download mode, and then try to flash any KDZ file from all the f180 KDzs. It gives me errors.
LG Support Tool on entering serial number and model name says "check out serial number and model"
ADB never detects my phone. So I can't upload anything.
No option to upload files via SD Card.

ok, so I have no clue what happened :crying: phone was in download mode. I did nothing, but only installed LG Support Tool USB driver, while the mobile connected.
Then I installed Microsoft .net framework 4.0. And my phone is now qhs_usbdload. it's officially bricked now. I have no clue what happened. This is all that happened before I restarted and selected "reboot to bootloader" and its dead. So there's nothing left to do but throw it out

WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?

1. Why is this in Development section?
2. You can't mount internal SD as USB storage. Use adb push or adb sideload instead, that will help you to get the files onto your phone.

awais3344 said:
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
Click to expand...
Click to collapse
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.

artit said:
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
Click to expand...
Click to collapse
My phone is acting weird. Sometime it would start. Sometime the red light would blink. Sometimes the red light wouldn't blink at all. Then sometimes, it starts. And then it doesn't.
I have no clue what is going on with it.
But it went to download mode many times again, it would go to fastboot, bootloader, recovery etc. Then sometimes it will not respond to any buttons at all! I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:

awais3344 said:
I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
Click to expand...
Click to collapse
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...

Regarding the charging problems, I had that once. I was able to startup the phone by simply using a 2A charger instead of the LG's 1.2A.

When I had this issue it was charging while in recovery. Please look at this post and flash your kdz.
http://forum.xda-developers.com/showthread.php?p=54934779. This one helped me http://forum.xda-developers.com/showthread.php?p=53728658
Sent from my LG-E975 using XDA Free mobile app

kt-Froggy said:
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Click to expand...
Click to collapse
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.

awais3344 said:
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
Click to expand...
Click to collapse
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.

huy_gm said:
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
Click to expand...
Click to collapse
Hi, regarding that. I was able to sideload exitrecovery.zip file. It goes to 100% then nothing happens. Nothing happened on phone screen as well.
And can you send me link to that stock zip kitkat? i have a miui.zip and few other roms that I have not tried. thanks
Edit: also what should I do about adb, am i doing correct?
Becuase in adb devices, my device is displayed with deviceID sideload
And i have only pasted adb folder, with a dll and a zip file, there is nothing else, do I need to install SDK?

I tried lg flash tool 2014 again, and it flashed, I swear yesterday I tried to flash it, and after clicking on it, it never showed me country and language selection menu, so it would sit there and do nothing. now I don't know how but it did it :laugh:
thank you so much you'all

Htc desire 320 rebooting bootloop (no recovery, no OS, no bootloader)

hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.

mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.

Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?

Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.

Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace

mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.

mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...

n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.

mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.

n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.

This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.

Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )

Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.

mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?

Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over

I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.

Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk

cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro

cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone

Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip

unbrick oneplus 5t, stuck in waiting for device in msmDownloadTool

Hi Guys,
Yesterday during an official update of my oneplus 5t (using the update manager from the phone itself), the phone got bricked and i dont know why....
So after some research i found it is hard bricked ( basically i cant do nothing, power on i cant, power +volume UP/DOWN too, and even when i plug the charge cable i have neither vibrations nor LED on)
So i follow this tutorial to unbrick the phone:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
I could get the phone recognize by the PC by pressing UP to see the phone as QUSB-BULK and then QUALCOMM QD LOADER after driver's update.
But when i run MSMDownloadTool ( V4.0.27 dumpling 43_0.36_180613) as administrator and click on start, the process get stuck in "waiting for device"
the status of connection before click on start was "connected" and after click and some process it turn to N/A
the status of communication is "memory size....."
status of last communication is "waiting for device"
I have tried several time and always the same result..... stuck in the waiting device
does someone have an idea on how to solve this? because i really need to unbrick the phone....
thank you in advance
EDIT:
I tried another version of MsmDownloadTool (dumpling_43_O.06_171206) and this time, the downloading of cache image failed....
I dont know what to do

You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?

DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.

rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.

DaRk-L0rD said:
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.
Click to expand...
Click to collapse
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.

rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
rokusho32 said:
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.
Click to expand...
Click to collapse
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know

DaRk-L0rD said:
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know
Click to expand...
Click to collapse
I have installed the ADB drivers
which version of MSMDownloadTool should i use?

DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.

rcbjr2 said:
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.
Click to expand...
Click to collapse
I have same situation.. did you resolve this problem?

piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
I contacted OnePlus and I sent them the phone and they reinstalled the operating system. I was never able to fix it myself. I even had an online session with OnePlus and they couldn't get the MSM software to recognize the phone (even though it was truly connected to my laptop). I also had an issue with my OnePlus 8T that got messed up doing something with Magisk, and OnePlus reinstalled the operating system as well. I still can't boot from the A partition though; just the B partition.

piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
At first, I chose WWAN-DHCP - which caused problem with connection

piechu11 said:
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
View attachment 5511425
At first, I chose WWAN-DHCP - which caused problem with connection
Click to expand...
Click to collapse
Thank you this solved my problem exactly.
i was restoring my metro by tmobile oneplus nord n10 BE2025 model with build tag BE88CF