Related
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Download Android SDK Tools from here and install the packages.
4) Plug your Ascend P1 to the PC.
5) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
6) Open "b113_b115-root_u9200---__[Nixing]" from your desktop.
7) Run "hwadb.exe".
8) Run "ubl.exe", click ROOT - this should root your device without restart and any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Recovery
lerso said:
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Click to expand...
Click to collapse
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
I am curious how you install some ROM as .zip file, when all original updates from Huawei have .app as extension.....
Nixing said:
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Plug your Ascend P1 to the PC.
4) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
5) Run "hwadb.exe".
6) Run "ubl.exe" - this should root your device without any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Click to expand...
Click to collapse
In my case it after step 5) it works a little bit different.
When run "Onekey_ROM_Ascendp1.exe" and stuck on reboot stage (just show Huawei Ascend), then you must install a driver for Blaze device manually, you can choose the standard "Android Adapter ADB interface" for this (it works in my case), after intalling the driver Onekey_ROM will resume and install only the recovery image and you phone is showing the Chinese recovery menu choose your "update.zip" or "gapps-signed.zip" from SD-card and it wil be installed (update.zip means your desired firmware).
It seems that the firmware in the Onekey_ROM_Ascendp1 tool will not be placed on the SD-card but in Local Storage, so it will not be installed, therefor put the "gapps-signed.zip" or "update.zip" before flashing on the SD-card so you can select it in Chinese recovery.
I only installed the gapps with original firmware B115 on the phone and all gapps are working.
GRTZ DiMaC
Hi people,
I'm sorry for this little off topic but I don't know where to find other Huawei Ascend P1's users.
I would like to buy this device but before I would like to know if this device is going fine.
In particular way: how is the in call audio quality? Is it missing calls (like other Huawei device U8800 Pro)? How is the Network (GSM and/or UMTS-3G) quality?
Is the price balanced to the overall quality of the device? I just know that the Huawei Ascend P1 is able to record amazing video and the audio quality is really incredible, but the "phone" function, how is it?
Sorry for the off topic.
It's a great news that I can root the device, so probably at 99% I will buy it after reading your comments.
Thank you in advance,
regards,
kalo
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Nixing said:
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Click to expand...
Click to collapse
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Build B218
Hi,
i have the Build B218.
Has anyone rooting?
B218
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Try Unlock Root here - Unlock Root 2.3.1 it says it can root the U9200 and might work for your firmware version.
You can also try the method for B113 and B115
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - Johnny Paranoia's Other Blog
or here
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - MadModder
See if it works and post back to let everyone know
ljmchinastar said:
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Click to expand...
Click to collapse
The links to my sites above have links to the tools and the link to OneKey's rom is also there on the - How to Install Root and Recovery on Huawei U9200 - Ascend P1 post
I didn't mirror nixings full download without his permission, though I will if he would like me to (Although I would have to remove the password because I don't like them lol)
Hope this helps
The main link for "b113_b115-root_u9200---__[Nixing]" works as well now, thanks for all your PMs!
Download Mode
Hey,
is there any trick to get into Download Mode/Fastboot?
Should I press both at the same time? When do I release them..
With Vol. Down + Power Key i don't get into Download Mode..
I just managed to get there once, but I don't remenber how I did it.
And by the way. When I press Vol.Up und Power, I get to the android recovery, stock. where I can do a wipe or apply a update from sdcard.
Pease let me known
jensema
EDIT:
Got it. Hold VOL. Down and then Plug in USB Cable.
Phone in Download Mode.
Now I need the right drivers.
Phone shows a "Blaze"
Can someone tell me which driver to use.
thanks
2.EDIT: Got it. Under Win7 , installing Hi Suite, then change Driver for "Blaze" to Android ADB Interface.
Fastboot working!
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
b113_b115-root_u9200---__[Nixing] mirror
Nixing has given me permission to mirror his download so here it is - b113_b115-root_u9200--__[Nixing] mirror
jensema said:
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
Click to expand...
Click to collapse
Hi jensema,
root and recovery works with B218 !:good:
http://www.mediafire.com/?7pdfh11ue8ykyk6
http://madmodder.co.uk/huawei/u9200/how-to-root-huawei-ascend-p1-u9200.htm
http://www.android-hilfe.de/huawei-ascend-p1-p1-s-forum/275267-root-recovery.html
Arcelor
Has anyone updated with cwm-recovery on B219?
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY0NjU=
WIND Mobile Huawei Ascend P1 (U9200)
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
JohnnyParanoia said:
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
Click to expand...
Click to collapse
I want to install the new version B118
I can not update with the alternate recovery
How can I get back to the original recovery.img?
Safe to update Superuser?
I have also successfully rooted my Wind Mobile, build U9200-1V100R001CANC113B104. Just wondering if it's safe to update Superuser (update available through system updates).
djstyles97 said:
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
Click to expand...
Click to collapse
Did not work on my Wind pentaband P1, the firmware version on mine is B105.
***
All thanks go to our awesome XDA-Developers, the developers at Oppo, and also to scumpicule for this working root method.
It doesn't require any alterations to the recovery system, just stick with the one that Oppo has provided.
This has only been tested on the X9076, it should theoretically work for other versions of the Find 7 as well, but please do this under your own discretion.
**Update: It has been reported that the newest Rom release of 1.2.2i or 1.2.3i and onward might not work with this root method! If this is the case, you will need to use these instructions from this post: http://forum.xda-developers.com/showpost.php?p=53902937&postcount=10
________________________________________________________________________________
CONTINUE with these instructions if you have Rom Version: 1.2.1i, otherwise if you have updated, click on the above link ^
INSTRUCTIONS:
Download the "Find7_ROOT4.3_bbs.oppo.cn.zip" file.
** It is also available at:
http://forum.xda-developers.com/showthread.php?t=2739102&highlight=find+7 **
Then Copy/Paste it in your phone on your root folder
Turn Off your phone
Simultaneously press the buttons ' power ' and 'volume down ' until you feel a vibration.
Your phone will reboot into recovery mode. ( Should be the OPPO recovery ! )
Select ' Choose English ' & Install zip file
Then choose the zip file that you have downloaded in step 1 & click "YES" to install.
Hit "Reboot" once everything is completed.
Go into app drawer and select the SuperSU app. Update the binary by selecting the "NORMAL" method.
Reopen SuperSU and make sure binary is okay.
Try downloading "Root Checker" or a app that requires root.
Congratulations, your device is now Rooted!!
________________________________________________________________________________
If you run into any errors, try updating the SuperSU binary again, or check under "NOTES" on the link above that scumpicule has posted.
________________________________________________________________________________
HIT THE THANKS BUTTON IF THIS HAS HELPED YOU.
Credits & Thanks
@karben @kedro @tk @Jimmy McGee
@scumpicule
installation failed unfortunately
i followed your steps and my device number is X9076
crackjas said:
installation failed unfortunately
i followed your steps and my device number is X9076
Click to expand...
Click to collapse
I'm pretty sure I used the same .zip file earlier today with the stock recovery, installation failed here too. (X9076).
Fortunately this worked perfectly: Click Here
binaryfalcon said:
I'm pretty sure I used the same .zip file earlier today with the stock recovery, installation failed here too. (X9076).
Fortunately this worked perfectly: Click Here
Click to expand...
Click to collapse
Thanks. It works!:good:
crackjas said:
installation failed unfortunately
i followed your steps and my device number is X9076
Click to expand...
Click to collapse
Were you able to get to SuperSU in the app drawer? Make sure that the binary was installed properly.
It's interesting because I was able to get it to work perfectly.
See attached photos of Root Checker.
Does not work on ColorOS 1.2.2i
I just got my Find 7 phone and after the OTA upgraded the system to 1.2.2i, when I tried to install the root file and it failed to install.
Installation Failed
No luck. Failed at the zip file installation part. Please let me know if you have any solution. Thanks. Cheers.:cyclops:
KoTP said:
No luck. Failed at the zip file installation part. Please let me know if you have any solution. Thanks. Cheers.:cyclops:
Click to expand...
Click to collapse
I'm having the same problem. When installing the zip from Oppo Recovery, it fails immediately every time. Tried both the Find7_ROOT4.3 and the Find7_GSM4.3 files. Any suggestions?
I think that after the update to 1.2.2i, the root might not work anymore. For all those that don't have it working, can you confirm if you have the 1.2.2i Rom version?
Sent from my X9076 using XDA Free mobile app
Good news!
I have found the Rooting method and instructions for Rom version 1.2.2i
It should work for every Oppo Find 7 and 7a (not confirmed) with any system (till 1.2.2i at least).
In the end system, bootloader and recovery will be intact - > stock rooted.
WORKING ON: x9077, x9076, x9006 (confirmed by #Oiler)
(NOTE):
Android SDK is required (which gives ADB and FASTBOOT files), if you have these files already on your computer, then you can just download TWRP, STOCK RECOVERY (oppo), and SUPERSU.
All the files are located below:
Preparation:
1. Phone with at least 30% battery.
2. Install Oppo drivers from "OPPO Driver" phone partition.
3. Download and unzip: AndroidSDKSlim - https://mega.co.nz/#!SEhFXbzL!Xy4PrX_NKFnAZvPaggQL-1Vw1PESzRCyqXiPrMlvWVM
4. Download: TWRP - https://mega.co.nz/#!gF0GhBzT!HGaWCcQfqr_ns2z7ZEIeeF-0KvXFliEOAFZ_Z-wHcdw and put it in "platform-tools" folder wich u get from zip above. (img file)
5. Download: Stock Recovery - https://mega.co.nz/#!rVQWXKhD!Ljy9pw_sy0VlKzxqJwuD4UoZGMwF_dOmOYWgR1mMRc4 Mod or Stock Recoveryhttp://ge.tt/2EQ5h2m1/v/0?c *2 and put it in "platform-tools" folder. (img file)
6. Download: SuperSU - http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip?retrieve_file=1 and put it on phone internal storage. (do not unpack)
Changing Recovery Menu:
1. Turn Off phone.
2. Press Volume UP + Power
3. Now u should see small discription on screen: fastboot
5. Plug the phone to PC.
4. Open command prompt inside "platform-tools" folder -> press SHIFT + Right Mouse Click, pick open command prompt here.
5. Write:
Code:
fastboot devices
6. You should see:
Code:
"your phone product code" Dartmoor
7. If you don't see your device listed, make sure drivers are installed properly. Next, write:
Code:
fastboot flash recovery twrp-x9077.img
after few second you should see OKAY. (No need to turn off phone) *1
Rooting the phone:
1. Power off the phone.
2. Hold volume DOWN and the POWER button to get into the TWRP Recovery.
3. Pick install and find the SuperSU zip file, confirm the flash.
4. Reboot the phone. (cash and davlik wipe not nessesary)
5. Phone is now rooted. (Check if there is working SuperSU app. Update binary if needed.)
Restoring stock Recovery Menu:
1. Power off the phone.
2. Press Volume UP + Power
3. Open command prompt on your PC inside "platform-tools" folder -> press SHIFT + Right Mouse Click, pick open command prompt here.
4. Write:
Code:
fastboot flash recovery x9077-official-recovery-mod.img
after few second you should see OKAY.
5. REBOOT, or turn off phone by pressing POWER for 3 sec.
6. Check Recovery Menu (Volume DOWN + Power)
____________________________________________________________________
NOTES:
*1 turning off after installing Recovery Mod is unnecessary, this is because the phone won't startup automatically into the installed Recovery Mod.
*2 Stock Recovery is provided as genuine by #Zeus (Oppo Official Staff). The other one - Stock Recovery Mod is provided by #Kedros which have removed checking of Oppo system (provides possibility to install custom files like roms or SuperSU etc.). #Kedros confirmed that OTA update is still available on it.
____________________________________________________________________
Give a Like if it helped
SOURCE: Jach0o from OPPO forums
JiraffeLeung said:
I think that after the update to 1.2.2i, the root might not work anymore. For all those that don't have it working, can you confirm if you have the 1.2.2i Rom version?
Sent from my X9076 using XDA Free mobile app
Click to expand...
Click to collapse
Yes. Mine is 1.2.2i
Same for me on the version number. 1.2.2I I was hoping the process would be easier. Oh well.
The link to the TWRP recovery is down. I tried to download it in every possible way, but I always get an error. WHen I click download once I get to MEGA, it is saying "temporary error, retrying". Please fix, thanks.
Edit - NM working now, thanks just in case you fixed it.
Edit - Rooted phone, left TWRP on if I ever go to CM11s. Had to do a few things diffrent than what you said, but got it to work. Thanks
JiraffeLeung said:
Good news!
I have found the Rooting method and instructions for Rom version 1.2.2i
It should work for every Oppo Find 7 and 7a (not confirmed) with any system (till 1.2.2i at least).
In the end system, bootloader and recovery will be intact - > stock rooted.
WORKING ON: x9077, x9076, x9006 (confirmed by #Oiler)
(NOTE):
Android SDK is required (which gives ADB and FASTBOOT files), if you have these files already on your computer, then you can just download TWRP, STOCK RECOVERY (oppo), and SUPERSU.
All the files are located below:
Preparation:
1. Phone with at least 30% battery.
2. Install Oppo drivers from "OPPO Driver" phone partition.
3. Download and unzip: AndroidSDKSlim - https://mega.co.nz/#!SEhFXbzL!Xy4PrX_NKFnAZvPaggQL-1Vw1PESzRCyqXiPrMlvWVM
4. Download: TWRP - https://mega.co.nz/#!gF0GhBzT!HGaWCcQfqr_ns2z7ZEIeeF-0KvXFliEOAFZ_Z-wHcdw and put it in "platform-tools" folder wich u get from zip above. (img file)
5. Download: Stock Recovery - https://mega.co.nz/#!rVQWXKhD!Ljy9pw_sy0VlKzxqJwuD4UoZGMwF_dOmOYWgR1mMRc4 Mod or Stock Recoveryhttp://ge.tt/2EQ5h2m1/v/0?c *2 and put it in "platform-tools" folder. (img file)
6. Download: SuperSU - http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip?retrieve_file=1 and put it on phone internal storage. (do not unpack)
Click to expand...
Click to collapse
Great stuff.
Feel free to share how you got it Rooted and which steps you took. It will help others here as well.
Sent from my X9076 using XDA Free mobile app
JiraffeLeung said:
Great stuff.
Feel free to share how you got it Rooted and which steps you took. It will help others here as well.
Sent from my X9076 using XDA Free mobile app
Click to expand...
Click to collapse
Total newbie. Could you explain preparation step 2 to me? (2. Install Oppo drivers from "OPPO Driver" phone partition.)
Will this method work with version 1.2.3i?
Many thanks.
Hey, yes the method should work for the most recent version as well. When you plug in your phone to you pc, it prompts you install the drivers from OPPO, just continue and install them.
If you don't see "Developer Options" in your settings ( in "More" ) then go into "About Phone" and click on "Build number" 5 times until you receive a message indicating that developer options is enabled.
Then plug in your phone and see if the drivers get updated. This process has been tested to work on Windows 7.
Sent from my X9076
I'm eager to try
JiraffeLeung said:
Hey, yes the method should work for the most recent version as well. When you plug in your phone to you pc, it prompts you install the drivers from OPPO, just continue and install them.
If you don't see "Developer Options" in your settings ( in "More" ) then go into "About Phone" and click on "Build number" 5 times until you receive a message indicating that developer options is enabled.
Then plug in your phone and see if the drivers get updated. This process has been tested to work on Windows 7.
Sent from my X9076
Click to expand...
Click to collapse
Thanks. Just waiting to find the time to try. I'll post the result.
Thanks again.
One more thing, you'll have to enable "USB Debugging" in developer options, then try plugging the phone in again.
Failed
JiraffeLeung said:
One more thing, you'll have to enable "USB Debugging" in developer options, then try plugging the phone in again.
Click to expand...
Click to collapse
Hi,
Thanks a lot for your help.
Though I'm pretty sure I've followed your instructions to the letter the phone would fail to install the update.SuperUser file so I can't get to get it rooted.
Any idea, suggestion, tip etc, will be much appreciated.
Thanks
How far were you able to get to? Any errors or freezing? What version of Rom are you on?
Hey guys, I decided to update the thread in hopes of clearing confusion.
Currently I've found two methods of rooting that seem to help people.
Method 1 - E.K IT Services: ekitservices.com currently run by senior member @djerick3 *Not a sponsorship*
Method 2 - CF-Auto Root: Very simple and easy to use, all you need a:
Windows PC (7 - 10)
USB Cable
Step 1 - Download CF-Auto Root for the SM-G920P.
Step 2 - Using either adb (adb reboot download) or hardware keys (turn the device off and hold in Volume Down + Home Button + Power Button once prompted, press Volume Up)
Step 3 - Plug the device into the PC and open the included Odin in the CF-Auto zip
Step 4 - Click the "AP" button and choose the included md5 file
Step 5 - Make sure to check the "Option(s)" tab and make sure only "Auto Reboot" and "F. Reset Time" are checked. Then switch back to the main tab and press start.
Step 6 - Wait as CF-Auto Root will begin to boot and root, note that the process can take while. Upon rebooting you should have the SuperSU app (Note. If its not there, you can find it HERE)
Step 6 - Enjoy
< ----- Optional - TWRP Install ------ >
As of right now, current TWRP releases are not working on marshmallow. Lucky though @ram9200 created a custom version of the tool that should work
Step 1 - Download the TWRP Tar file
Step 2 - Boot back into Odin mode and flash via Odin on your PC (use the "AP" tab once more)
Hope this helps:good: as always though, of you need help feel free to to send me a PM
You stole my thunder bro! :silly:
JoeFCaputo113 said:
You stole my thunder bro! :silly:
Click to expand...
Click to collapse
Lol
going to try this now thanks hopefully i can get back my snaprefs thats all i really care about xD
I must be doing something wrong
when I flash it with odin it says it was successful and reboots to home screen, then when I turn the phone off an turn on with power+home+volup it goes to a blue screen saying its installing an update and then to normal recovery
Neto. said:
when I flash it with odin it says it was successful and reboots to home screen, then when I turn the phone off an turn on with power+home+volup it goes to a blue screen saying its installing an update and then to normal recovery
Click to expand...
Click to collapse
maybe, just maybe u didnt turn on OEM unlock in development setting.
yaibakt said:
maybe, just maybe u didnt turn on OEM unlock in development setting.
Click to expand...
Click to collapse
I did turn on
GalaxyS6Noob said:
going to try this now thanks hopefully i can get back my snaprefs thats all i really care about xD
Click to expand...
Click to collapse
Broooo, I had to get rid of snapprefs bc it was like 5+ versions behind the official snapchat.. Have you gotten it to work??
Saafir said:
Untick auto reboot in Odin. The kernel is overwriting to stock recovery on boot.
Click to expand...
Click to collapse
it worked thanks, I don´t know if i did it right butwhen odin finished I forced the phone off and in the same "movement" entered recovery .
all ok now thanks
1619415 said:
Hey guys, after all the confusion on rooting 6.0.1, I decided to throw together a guide real quick (hope this helps)
To do this, you will need:
TWRP (This is a special version only for the Sprint SM-G920P and is meant to be flashed with Odin)
SuperSU 2.68
Odin
Steps)
1) Boot your device into download/odin mode (adb reboot download) or (while the device is off hold home+power+volume down then you will be taken to a light blueish screen saying "Warning", just press volume up)
2) Once your device is in download/odin mode, plug it into your windows PC and open Odin then in odin, click the "AP" button then find where you downloaded the TWRP .tar and press start
3) After that, your device should reboot into the system, if present use "adb reboot recovery" if you don't have adb, turn the device off and hold home+power+volume up and your should get some red text in the upper left hand corner then you should be brought to TWRP where you can flash SuperSU (to get SuperSU onto your device, you can use TWRP's built in MTP function or use adb, I recommend using adb but TWRP's MTP is also good (to enable MTP, click on the "mount" button then make sure to tap the "Cache","Data" and "System" buttons, if your PC does not detect the device, tap "Disable MTP" then tap "Enable MTP". Then your device should be detected where you can then move SuperSU to your device and flash it,
If you need any help, please feel free to PM me:good:
Click to expand...
Click to collapse
As soon as I get home will try this, thanks a bunch!
I need to get my free Hotspot again, I guess I will have to add a new rom, any suggestions?
valbher said:
As soon as I get home will try this, thanks a bunch!
I need to get my free Hotspot again, I guess I will have to add a new rom, any suggestions?
Click to expand...
Click to collapse
I'm hoping to have TeamSPR ready by Sunday:fingers-crossed:
Help
Same issue here. when recovery is booted. blue update screen then original recovery. OEM is on
---------- Post added at 05:19 AM ---------- Previous post was at 04:39 AM ----------
im getting the blue updateing as well. then goes to original recovery/ OEM is on
unchecked the auto reboot and followed directions and am now rooted. Thanks!
This worked for me! Thank you so much!
A few modifications to the overall guide:
a. Turn on OEM unlock (I forgot to do this first)
2. Turn off auto-boot in ODIN (I needed to do this, as TWRP would not load the first time)
d. Move SuperSU zip folder to phone (same as other methods)
Now just need a good custom ROM...
I unchecked auto-boot in Odin and turned on OEM unlock, but it isn't working. I boot into download mode and apply the TWRP, but it is just stuck in download mode with the white bar at like 99% complete. It doesn't hit 100%. I forced my phone off and then booted into recovery right after and now my recovery mode is a white screen. Not really sure what to do.
Saafir said:
Untick auto reboot in Odin. The kernel is overwriting to stock recovery on boot.
Click to expand...
Click to collapse
You are THE MAN, worked perfect, Untick auto reboot worked!
Roms for 6.0.1?
Saafir said:
Untick auto reboot in Odin. The kernel is overwriting to stock recovery on boot.
Click to expand...
Click to collapse
Any good roms now that I have flashed my phone?
Rooted my Sm-g920r4 us cellular tonight perfectly. Thank you very much. =) happy camper with 6.0.1 root now.
I was curious since it said Sprint only method but assured it rooted my us cellular just fine and everything is working. Rebooted and still have root and working twrp recovery. Thanks again.
1619415 said:
Hey guys, after all the confusion on rooting 6.0.1, I decided to throw together a guide real quick (hope this helps)
To do this, you will need:
TWRP (This is a special version only for the Sprint SM-G920P and is meant to be flashed with Odin)
SuperSU 2.68
Odin
Steps)
1) Boot your device into download/odin mode (adb reboot download) or (while the device is off hold home+power+volume down then you will be taken to a light blueish screen saying "Warning", just press volume up)
2) Once your device is in download/odin mode, plug it into your windows PC and open Odin then in odin, click the "AP" button then find where you downloaded the TWRP .tar and press start
3) After that, your device should reboot into the system, if present use "adb reboot recovery" if you don't have adb, turn the device off and hold home+power+volume up and your should get some red text in the upper left hand corner then you should be brought to TWRP where you can flash SuperSU (to get SuperSU onto your device, you can use TWRP's built in MTP function or use adb, I recommend using adb but TWRP's MTP is also good (to enable MTP, click on the "mount" button then make sure to tap the "Cache","Data" and "System" buttons, if your PC does not detect the device, tap "Disable MTP" then tap "Enable MTP". Then your device should be detected where you can then move SuperSU to your device and flash it,
If you need any help, please feel free to PM me:good:
Click to expand...
Click to collapse
Thank U!!!
Can someone help me with a step by step root,please ?
AndyHppy said:
Can someone help me with a step by step root,please ?
Click to expand...
Click to collapse
Download ODIN, TWRP, SuperSU, Samsung Drivers
- Copy the SuperSU.zip to your phone's storage
- Install Samsung Drivers
- Unzip Odin and start it
- Start your phone in "DOWNLOAD MODE" (Power off and then hold "Vol -" + "Home" + "Power")
-Connect phone to your computer with a usb cable
-Click on "AP" in "ODIN" and select the downloaded TWRP file
- Uncheck "Automatic Reboot" in ODIN
- Press "Start" and wait until its done
- plug off phone, remove battery and put itr back in again
- Start phone in TWRP mode ("Vol +" + "Home" + "Power")
-On first start TWRP asks you for System write premissions --> grant
- Within TWRP press "Install" and select the SuperSU.zip
-Reboot your phone and enjoy root
did you try Kingroot
Just to inform the next guy finding this thread through google like me:
I used LSxDs steps without issue, but in my case afterwards 3 more steps were necessary;
1. Open the SuperSU app and when asked to disable KNOX click yes, the app will hang on "disabling KNOX".
2. Restart the phone.
3. Open the SuperSU app again and when asked to disable KNOX click yes, this time it works.
Thanks to LS.xD for the steps, rooted a i9195i successfully today!
For me it worked without the 3 additional steps from LordPoopyIV.
For the next one: I tried it under Linux with JOdin. Did not work for me, because of missing 'pit file'. With odin under windows it worked flaweless.
Worked perfectly!! Thanks!
I'm having an issue - when I try, then I'm stuck at this step:
"-On first start TWRP asks you for System write premissions --> grant"
Mine does not - and it does not have the "install" option - only reboot, apply update from ADB, apply update from external storage, wipe data, wipe cache and apply update from cache.
Any help in moving forward would be greatly appriciated..
Could somebody please update the links for Odin and supersu that LS.xD mentioned in the first post?
Thanks!
Who knows which HSPA+ version is supported on i9192i? I suppose it is HSPA+ up to 42Mbits, isn it? On regular i9192 it is HSPA+ up to 21Mbits, but i see i9192i works on 25 Mbits right now, so it should be more fast version, which one exactly?
READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?
Oh. Alright thanks for telling me.
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.
Can you upload it to Mediafire? Mega marks a "temporal error"...
Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?
Works on a105m?
Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes
i receive message that i running samsumg not official firmware after odin install recovery.tar
not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.
BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message
have you fixed the storage reduced to 16gb problem?
I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?