Hi, I unrooted my note 8 GT-N5110 because it was acting all wacky. In searching for instructions on how to unroot (not that many) I wasn't too sure of which was the right official firmware to flash via odin. Though some of the few sites I found on official firmware, they somewhat always pointed me to http://samsung-updates.com/device/?id=GT-N5110 Now here is where I get confused. They have regions listed (sammobile does as well) but none of them say anything about USA or North America for that matter.
Can someone please tell me what region we are supposed to be using for this tablet (N5110). I ended up flashing the one from region FWD (Morocco) seemed to be the latest and everything is working fine. I did notice that there are two new Samsung apps that weren't on it out of the box ie: Learners Hub and Readers Hub.
My concern is that maybe I'm screwing with my future updates. Again can someone please help me with which is our region (USA).
Thanks in advance.
Try looking on http://www.sammobile.com/
You should be able to find the correct firmware. I flashed back to 4.1.2 for UK region (from 4.2.2)
PUNCHYS said:
Hi, I unrooted my note 8 GT-N5110 because it was acting all wacky. In searching for instructions on how to unroot (not that many) I wasn't too sure of which was the right official firmware to flash via odin. Though some of the few sites I found on official firmware, they somewhat always pointed me to http://samsung-updates.com/device/?id=GT-N5110 Now here is where I get confused. They have regions listed (sammobile does as well) but none of them say anything about USA or North America for that matter.
Can someone please tell me what region we are supposed to be using for this tablet (N5110). I ended up flashing the one from region FWD (Morocco) seemed to be the latest and everything is working fine. I did notice that there are two new Samsung apps that weren't on it out of the box ie: Learners Hub and Readers Hub.
My concern is that maybe I'm screwing with my future updates. Again can someone please help me with which is our region (USA).
Thanks in advance.
Click to expand...
Click to collapse
Check out mskip's All In One Tool. You should be able to easily do what you want with that.
You. Obviously didn't go to my thread in android development....
Sent from my SGH-T889 using Tapatalk 4 Beta
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
|Vyp| said:
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
Click to expand...
Click to collapse
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
SilviuMik said:
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
Click to expand...
Click to collapse
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
|Vyp| said:
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
Click to expand...
Click to collapse
Yes BUT ! Do not download any firmware that have MK4 MK5 ML1 ML2 ML4 NA2 in name They contain Knox bootloader
Hello from a newbie & sorry if this has been covered elsewhere, but I can't seem to find it anywhere for the 2014 edition.
I've bought a 32Gb LTE Note 10.1 2014 edition from Hong Kong and needless to say it comes with a heavily biased Chinese version of the operating system, now having read other fora, I have managed to understand how to flash the device using Odin, however I was after a UK (BTU) version of the rom, but what I have got is the Spanish one.
OK, I have no problem with it as I have changed all of the settings to use UK English, but I am looking for a way to change the CSC code to from PHE (Spanish) to BTU (UK) so that I can get any firmware updates for it.
The one thing I want to do is keep it as near to stock condition as possible, namely I don't want to root it (is that what it's called?).
Can someone please advise me how to do this please.
Thanks.
If you know how to flash the thing, just get a Spanish firmware from sammy mobile and flash it
I've also ordered a 605 from HK. I intend to flash this firmware.
I bought the P605 from Germany and it is unlocked but T Mobile branded. Can I flash the UK firmware ?
Thanks,
Halldor
Halldor said:
I bought the P605 from Germany and it is unlocked but T Mobile branded. Can I flash the UK firmware ?
Thanks,
Halldor
Click to expand...
Click to collapse
Sure
Gesendet von meinem GT-I9505 mit Tapatalk
@Ben81.
That despite it saying it's a BTU firmware isn't. It's the one I downloaded and is the Spanish one (PHE), I really do wish that those who provide these firmwares ensure that when they say it's from the UK it IS from the UK and when you do the flash it gives you the correct CSC code, when you plug it into Kies.
Thanks for the info. Will probably still flash that as it'll be better than the Chinese one!
EDIT: Installed it and can confirm it gives a PHE code.
Hello Friends,
I've bought a Galaxy Tab S 10.5 SM-T800 in China but unfortunately I'm not able to install google play and youtube on it,so can anyone help me in order to clarify which ROM is compatible with this tablet without "bricking " it? I'm from Brazil and any info will be very helpful.
Thank you all, Wish you all the best!
Best Regards,
Expedito
Chinese tablette, change/add language, flash to french?
Hi guys,
I'm on the same boat, I bought the device from China for my dad, but it only has Chinese/Korean/English language and a lot of stuff he doesn't want/need.
I would like to flash the tablet to French, but it seems the ROMS are country dependent, and I don't want to brick it just yet
What's my best option to get french on the device?
Any feedback on this will be appreciated!!
marcorobert said:
Hi guys,
I'm on the same boat, I bought the device from China for my dad, but it only has Chinese/Korean/English language and a lot of stuff he doesn't want/need.
I would like to flash the tablet to French, but it seems the ROMS are country dependent, and I don't want to brick it just yet
What's my best option to get french on the device?
Any feedback on this will be appreciated!!
Click to expand...
Click to collapse
Well, what's your number of the Tab? SM-T800? SM-T805?
Tkkg1994 said:
Well, what's your number of the Tab? SM-T800? SM-T805?
Click to expand...
Click to collapse
Hello My TAB Number is SM-T800 -WIFI
Thank you!:good:
marcorobert said:
Hi guys,
I'm on the same boat, I bought the device from China for my dad, but it only has Chinese/Korean/English language and a lot of stuff he doesn't want/need.
I would like to flash the tablet to French, but it seems the ROMS are country dependent, and I don't want to brick it just yet
What's my best option to get french on the device?
Any feedback on this will be appreciated!!
Click to expand...
Click to collapse
Hello,
could you install the Google Play and youTube in your device?
Thank you
SM-T800C (China) is compatible with SM-T800
SM-T805C (China) NO (modem.bin, sboot.bin and system.img you can not flash through Odin). If you want, you can flash this firmware:
http://forum.xda-developers.com/galaxy-tab-s/general/sm-t805-zhu1ang2-multilanguage-t2845483 but with my system.img ZHU1ANG2 for T805C:
Dowload firmware ZHU1ANG2 for T805C
bodivas said:
SM-T800C (China) is compatible with SM-T800
SM-T805C (China) NO (modem.bin, sboot.bin and system.img you can not flash through Odin). If you want, you can flash this firmware:
http://forum.xda-developers.com/galaxy-tab-s/general/sm-t805-zhu1ang2-multilanguage-t2845483 but with my system.img ZHU1ANG2 for T805C:
https://docs.google.com/file/d/0B6HUyOxY0Qb5VHhHUFk2dHFaSkU/edit?pli=1
Click to expand...
Click to collapse
Hello Bodivas, so far, thank you very much, but here comes another question, If I flash the firmware in my SM-T800 (bought in China) that you suggest, would I be able to install google play and youtube?
Thanks again.:good:
abidaboy said:
If I flash the firmware in my SM-T800 (bought in China) that you suggest, would I be able to install google play and youtube?
Click to expand...
Click to collapse
You'll have the European model with all the services of google working ..
Try to flash this latest firmware for Hong Kong. After the flash, you have to get into recovery mod and do the wipe reset factory.
Download
bodivas said:
You'll have the European model with all the services of google working ..
Try to flash this latest firmware for Hong Kong. After the flash, you have to get into recovery mod and do the wipe reset factory.
Hello Bodivas,
Thank you very much my friend. So just confirming which rom I have to download for my SM-T800 (china) the SM-T800 European ROM, install it and then install the firmware that you suggest in your last post?
Thank you very very much!
Click to expand...
Click to collapse
abidaboy
You just have to flash the one I posted above and do the reset. Stop.
Firmware Hong Kong is the European firmware (not ė China and contains all the google services) but as a rule are the fastest of those european
bodivas said:
abidaboy
You just have to flash the one I posted above and do the reset. Stop.
Firmware Hong Kong is the European firmware (not ė China and contains all the google services) but as a rule are the fastest of those european
Click to expand...
Click to collapse
what firmware would be compatible for SM-T805C with gapps and English IME?
Flashing SM-T805C with firmware ZHU1ANG2
bodivas said:
SM-T800C (China) is compatible with SM-T800
SM-T805C (China) NO (modem.bin, sboot.bin and system.img you can not flash through Odin). If you want, you can flash this firmware:
http://forum.xda-developers.com/galaxy-tab-s/general/sm-t805-zhu1ang2-multilanguage-t2845483 but with my system.img ZHU1ANG2 for T805C:
Dowload firmware ZHU1ANG2 for T805C
Click to expand...
Click to collapse
Hello bodivas,
Thanks for your help. I have downloaded the firmware ZHU1ANG2 from your link. You mentioned that it cannot be flashed through Odin. Could you guide me through the process (is there a special way to replace the old firmware with this?)
also want to know...
Unfortunately, I also have the same question... Any helps would be greatly appreciated!:good::good::good:
chinese Tab S
oxfei said:
Unfortunately, I also have the same question... Any helps would be greatly appreciated!:good::good::good:
Click to expand...
Click to collapse
Hi, I have the same problem with my Tab S 805 from China, have you already been able to flash the suggested ROM ?
Thanks !
China SM-T805C
rjterhorst said:
Hi, I have the same problem with my Tab S 805 from China, have you already been able to flash the suggested ROM ?
Thanks !
Click to expand...
Click to collapse
I haven't. I am being careful. I am waiting on Bodiva to answer my question. Bodiva if you are seeing this can you please advise
I'm in the UK, bought my Tab S 10.5 from eGlobal Central UK and when it arrived the system software was in Chinese. I was able to change it ok to English and the model number is SM-T800. The Samsung internet app home page is the Samsung Hong Kong site. All Google apps are present and correct and there are no preinstalled Chinese apps. But I can't get Odin to recognise it in download mode. I've tried different cables, different usb sockets, I've even tried it on 2 pc's but no use. Odin does see it on Com port 9 when the tablet is booted up, but doesn't see it at all on the 2nd pc. It connects as an mtp device on both pc's ok.
So even though its an SM-T800 Tab S, it looks like I have no mission of rooting it as Odin doesn't work. I suppose I could return it as I wasn't told in advance that it would be a Chinese one I was buying.
niijonas said:
I haven't. I am being careful. I am waiting on Bodiva to answer my question. Bodiva if you are seeing this can you please advise
Click to expand...
Click to collapse
Hi, I used the ROM Bodiva suggested. It works perfect !
The only thing that doesn't work is the 4g connection. it doesn't recognize the SIM card (null / null IMEI). I am still looking for a solution for that. But for the rest the ROM is OK, can easily be flashed through ODIN.
Robbert
mickrick said:
I'm in the UK, bought my Tab S 10.5 from eGlobal Central UK and when it arrived the system software was in Chinese. I was able to change it ok to English and the model number is SM-T800. The Samsung internet app home page is the Samsung Hong Kong site. All Google apps are present and correct and there are no preinstalled Chinese apps. But I can't get Odin to recognise it in download mode. I've tried different cables, different usb sockets, I've even tried it on 2 pc's but no use. Odin does see it on Com port 9 when the tablet is booted up, but doesn't see it at all on the 2nd pc. It connects as an mtp device on both pc's ok.
So even though its an SM-T800 Tab S, it looks like I have no mission of rooting it as Odin doesn't work. I suppose I could return it as I wasn't told in advance that it would be a Chinese one I was buying.
Click to expand...
Click to collapse
which odin do you use.... I use odin 3.07, but it seems odin 3.09 for galaxy s4 also recognizes the tablet, although I haven't confirmed it actually works. See if this works: go to your tablet's settings, tap general, tap "about device", then tap "build number" 7 times. Now you have developer options. Now tap that and check enable usb-debugging. If you have installed adb, open a command terminal with admin rights and type "adb reboot download" (without the quotationmarks) put your original samsung cable in the top-usb port on the back of your computer, open odin 3.07, and check the connection.
rjterhorst said:
Hi, I used the ROM Bodiva suggested. It works perfect !
The only thing that doesn't work is the 4g connection. it doesn't recognize the SIM card (null / null IMEI). I am still looking for a solution for that. But for the rest the ROM is OK, can easily be flashed through ODIN.
Robbert
Click to expand...
Click to collapse
That will be difficult if not impossible until someone can change the bootloader, even in Hong Kong if you tell them you live on
the mainland, they will not sell you a 4G model as it will not work.
One strange thing is that with every ROM ever made, if you for example took the SamsungIME apk and moved it to another device
that was similar, it worked fine, it does not in this, a Hong Kong 805 IME will not even register or be recognized on the 805C. That
is enough to suspect that China does not want you to replace that keyboard, but why? keylogging perhaps.
lorinkundert said:
That will be difficult if not impossible until someone can change the bootloader, even in Hong Kong if you tell them you live on
the mainland, they will not sell you a 4G model as it will not work.
One strange thing is that with every ROM ever made, if you for example took the SamsungIME apk and moved it to another device
that was similar, it worked fine, it does not in this, a Hong Kong 805 IME will not even register or be recognized on the 805C. That
is enough to suspect that China does not want you to replace that keyboard, but why? keylogging perhaps.
Click to expand...
Click to collapse
Hi, what would happen if I would flash an European 805 firmware on the 805C ?
Hi guy,
I purchased samsung galaxy watch about 2 weeks ago from amazon. It was a international version. I thought it didn't had any different for US version plus it was cheaper the US version. Later on i found that samsung pay didn't work due to being international version and csc R800XAOU1DSL1 it workes perfect but i wanted Samsung pay to work so came upon a thread that show how to change csc but it worked on older versions not on tizen 4.0.0.4 so my only option was to downgrade so i did to firmware R800XXU1APH3 and changed csc to XAR now samsung pay work fine but stuck to Tizen 4.0.0.0 old version. When i try to update it says "software up to date" .
Need help!!
*if you guys need link to firmware or xda thread let me know
IMHO flash now DSL1 back... with netOdin...
Remember Backup BEFORE... as Full Wipe... Factory Reset...
Best Regards
Your problem is that APH3 was never released for XAR (you can check here).
Now that you are on XAR, you can simply flash DSL1, the same way you flashed APH3 and you should be fine, also for automatic future updates.
DSL1 is very hard to find. If you have link to it please post.
https://forum.xda-developers.com/showpost.php?p=81261659&postcount=133
Please be carefully and choose correct file for your SM-R800...
Best Regards
Thanks guys! Fingers crossed let hope it works.
Ill let you know :fingers-crossed: