I have an international stock HTC One M9. CID is: HTC__621 and firmware version: 210.709.1 - I've already found the stock recovery for 210.709.1 - I'm looking to install a custom ROM, but I may want to go back to stock later on. I found a TWRP stock backup for 210.709.1, but because I am S-ON, will I not have to manually flash the boot.img? I used winrar to look into the TWRP backup, and I could not find a boot.img. So, my question is: if I flash the TWRP backup using TWRP, will the boot.img automatically get flashed?
You will have to flash the boot.img manually. The boot image is there it should be called boot.emmc.win .
mrbtree98 said:
You will have to flash the boot.img manually. The boot image is there it should be called boot.emmc.win .
Click to expand...
Click to collapse
Should I rename this to: "boot.img"? And then, use command: " fastboot flash boot boot.img"?
mrbtree98 said:
You will have to flash the boot.img manually. The boot image is there it should be called boot.emmc.win .
Click to expand...
Click to collapse
There's no "boot.emmc.win" within the archive? I can't find it...
arif9m9 said:
Should I rename this to: "boot.img"? And then, use command: " fastboot flash boot boot.img"?
Click to expand...
Click to collapse
Some weeks ago I was told that all newer phones than the HTC One M7 are able to flash boot images with TWRP even if they are S-ON. (I wasn't able to verify that since my phone is S-OFF.) So there should be no need to rename and manually flash the boot image if it's already inside the backup.
arif9m9 said:
There's no "boot.emmc.win" within the archive? I can't find it...
Click to expand...
Click to collapse
You can find the needed boot image in my signature.
Flippy498 said:
You can find the needed boot image in my signature.
Click to expand...
Click to collapse
Thanks. I downloaded: "boot_2.10.709.1.img" from your signature. Do I just flash it in fastboot like this: fastboot flash boot boot_2.10.709.1.img"? Is it okay if I rename it to just: boot.img?
My M9 is completely stock, right now. I'm intending to: unlock the bootloader, flash TWRP recovery, and finally, install an ASOP ROM.
When attempting to go back to stock, I'm going to: boot into TWRP, wipe everything except for SD card, flash the 2.10.709.1 TWRP stock backup, boot into fastboot and flash the command: "fastboot flash boot boot_2.10.709.1.img", flash the stock 2.10.709.1 recovery, and finally, relock the bootloader. Will all these steps be correct for an attempt to go back to stock?
arif9m9 said:
Thanks. I downloaded: "boot_2.10.709.1.img" from your signature. Do I just flash it in fastboot like this: fastboot flash boot boot_2.10.709.1.img"? Is it okay if I rename it to just: boot.img?
My M9 is completely stock, right now. I'm intending to: unlock the bootloader, flash TWRP recovery, and finally, install an ASOP ROM.
When attempting to go back to stock, I'm going to: boot into TWRP, wipe everything except for SD card, flash the 2.10.709.1 TWRP stock backup, boot into fastboot and flash the command: "fastboot flash boot boot_2.10.709.1.img", flash the stock 2.10.709.1 recovery, and finally, relock the bootloader. Will all these steps be correct for an attempt to go back to stock?
Click to expand...
Click to collapse
If you use the backup from my signature you only need to follow the instructions on the first page of my google sheet to get back to stock.
Be warned: Since Android 5.1 you should only relock the bootloader if you are completely sure that your phone is able to boot to system and that you ticked the new option that allows a bootloader unlock (can be found in the developers options). Many users already got stuck with a non-booting phone that cannot be re-unlocked because they didn't fulfill these requirements. (Sidenote: If you only want to get back to stock to install new OTAs you don't need to relock your bootloader.)
Besides I read that some people stated that the AOSP roms of the M9 messed up their LTE reception (so that LTE was even unusable on other custom roms or stock rom). I don't know whether this problem is already fixed. Some weeks passed since I read about that problem so I suggest you to read the corresponding threads before you start flashing.
arif9m9 said:
Thanks. I downloaded: "boot_2.10.709.1.img" from your signature. Do I just flash it in fastboot like this: fastboot flash boot boot_2.10.709.1.img"? Is it okay if I rename it to just: boot.img?
My M9 is completely stock, right now. I'm intending to: unlock the bootloader, flash TWRP recovery, and finally, install an ASOP ROM.
When attempting to go back to stock, I'm going to: boot into TWRP, wipe everything except for SD card, flash the 2.10.709.1 TWRP stock backup, boot into fastboot and flash the command: "fastboot flash boot boot_2.10.709.1.img", flash the stock 2.10.709.1 recovery, and finally, relock the bootloader. Will all these steps be correct for an attempt to go back to stock?
Click to expand...
Click to collapse
There is no need to flash the boot.img separately on this phone.
As noted DO NOT RELOCK unless you have ticked that "allow oem unlocking" option first. I cannot stress this enough.
Also, no AOSP rom currently has a working camera.
iElvis said:
There is no need to flash the boot.img separately on this phone.
As noted DO NOT RELOCK unless you have ticked that "allow oem unlocking" option first. I cannot stress this enough.
Also, no AOSP rom currently has a working camera.
Click to expand...
Click to collapse
My phone is S-ON, won't I have to flash the boot.img via fastboot?
arif9m9 said:
My phone is S-ON, won't I have to flash the boot.img via fastboot?
Click to expand...
Click to collapse
Flippy498 said:
Some weeks ago I was told that all newer phones than the HTC One M7 are able to flash boot images with TWRP even if they are S-ON.
Click to expand...
Click to collapse
iElvis said:
There is no need to flash the boot.img separately on this phone.
Click to expand...
Click to collapse
No, it's not needed. The only exceptions are backups that don't contain a boot image (like mine for example). That's why I created the google sheet with the instructions.
Flippy498 said:
No, it's not needed.
Click to expand...
Click to collapse
But, when installing custom ROMS, I'll definitely have to use the fastboot command to flash the boot image, right?
arif9m9 said:
But, when installing custom ROMS, I'll definitely have to use the fastboot command to flash the boot image, right?
Click to expand...
Click to collapse
No.
Flippy498 said:
No.
Click to expand...
Click to collapse
But, I'm S-ON....
arif9m9 said:
But, I'm S-ON....
Click to expand...
Click to collapse
It hasn't been an S-on restriction since the M7.
iElvis said:
It hasn't been an S-on restriction since the M7.
Click to expand...
Click to collapse
Does that mean I can flash RUUs even if I'm S-ON?
arif9m9 said:
Does that mean I can flash RUUs even if I'm S-ON?
Click to expand...
Click to collapse
For your CID/MID, yes.
iElvis said:
For your CID/MID, yes.
Click to expand...
Click to collapse
But, all the 'Returning to stock' guides
for the M9 state S-OFF is obligatory?
arif9m9 said:
But, all the 'Returning to stock' guides
for the M9 state S-OFF is obligatory?
Click to expand...
Click to collapse
It depends. If you have a current RUU for your phone (i.e., you don't need to downgrade), you can run it S-on, as that's what it's for.
But if you need to downgrade because the only RUU is an earlier version, yes you do need s-off.
S-off also allows you to go back to LOCKED instead of RELOCKED.
iElvis said:
It depends. If you have a current RUU for your phone (i.e., you don't need to downgrade), you can run it S-on, as that's what it's for.
But if you need to downgrade because the only RUU is an earlier version, yes you do need s-off.
S-off also allows you to go back to LOCKED instead of RELOCKED.
Click to expand...
Click to collapse
When going back to stock, at which stage should I relock my bootloader?
arif9m9 said:
But, all the 'Returning to stock' guides
for the M9 state S-OFF is obligatory?
Click to expand...
Click to collapse
Because if you follow these guides your phone will state "locked" instead of "relocked" at the end. And that is only possible with S-OFF. Besides with S-ON you can only use RUUs with the same firmware version as your phone (or newer RUUs)*.
*Actually downgrades seem to be possible, too, but as far as I know only if the two first numbers of the firmware versions before and after the downgrade are the same. Like from 1.32.xxx.15 to 1.32.xxx.8 but not from 1.40 versions to 1.32 versions or from 2.xx versions to lower versions.
Edit: Looks like I didn't type fast enough.
Related
Ok im nexus user but my sister gave me her old DHD to give it to my father but i can't root that $#$!#$ device...im on 3.13.163.3 software no root no s-off (whatever this is) and im not sure what version i have to download from htcdev to downgrade to hboot2.....anyone can help???
Ok i manage to unlock the bootloader with upgrading hboot....i dont have sdcard can i remove soff without one???so i can normally flash roms??cause i flash "RandomROMv101" i also fastboot flash the boot.img after that....but i didnt manage to boot to rom....it takes me to twrp!!!
If your bootloader is S-On unlocked, you need to flash the boot.img from fastboot each time you flash a ROM.
bananagranola said:
If your bootloader is S-On unlocked, you need to flash the boot.img from fastboot each time you flash a ROM.
Click to expand...
Click to collapse
On fastboot is show a purple line sais unlock something...but one line bellow sais sON...can i s-off it without sdcard??
Why do you want S-Off?
bananagranola said:
Why do you want S-Off?
Click to expand...
Click to collapse
To be able to flash boot without flasthboot....i cant flash nothing now...for 4.1 roms i need to flash something else??i flash them through twrp after that i flash boot.img through fastboot but it send me straight to recovery
pikachukaki said:
To be able to flash boot without flasthboot....i cant flash nothing now...for 4.1 roms i need to flash something else??i flash them through twrp after that i flash boot.img through fastboot but it send me straight to recovery
Click to expand...
Click to collapse
What version of TWRP are you running? What ROM are you trying to flash? Are you full wiping? How are you flashing the boot.img? Are there any error messages?
bananagranola said:
What version of TWRP are you running? What ROM are you trying to flash? Are you full wiping? How are you flashing the boot.img? Are there any error messages?
Click to expand...
Click to collapse
This happent to me for the 1st time...but it needed format system too....not sure maybe it isnt inside the update-script file!!!now its all good....so whats exacly soff is doing??i didnt need to flash boot with fastboot
pikachukaki said:
This happent to me for the 1st time...but it needed format system too....not sure maybe it isnt inside the update-script file!!!now its all good....so whats exacly soff is doing??i didnt need to flash boot with fastboot
Click to expand...
Click to collapse
I have no idea what you're saying.
bananagranola said:
I have no idea what you're saying.
Click to expand...
Click to collapse
I had to wipe system too...i only making factory reset that didnt wipe system...all roms i have used wipe system through update-script...anyway now its all good...but why i didnt need to flash boot.img through fastboot?
look here http://forum.xda-developers.com/showthread.php?t=2367322
I have to get 100% stock for warrenty.. my devices is s-off, custom recovery, bootloader unlocked and custom rom. Will i get to stock with these steps: ?
- flash the stock rom (from my nadroid backup)
- flash the stock recovery
- set the bootloader to "locked"
- go back s-on
do i need an unlocked bootloader to get s-on ("writesecureflag 3) ?
Thanks!
If you used htcdev to unlock the boot loader, this can be a problem since HTC can see it!
MICH_** said:
I have to get 100% stock for warrenty.. my devices is s-off, custom recovery, bootloader unlocked and custom rom. Will i get to stock with these steps: ?
- flash the stock rom (from my nadroid backup)
- flash the stock recovery
- set the bootloader to "locked"
- go back s-on
do i need an unlocked bootloader to get s-on ("writesecureflag 3) ?
Thanks!
Click to expand...
Click to collapse
Have you tried looking at this thread? http://forum.xda-developers.com/showthread.php?t=2735235
MrKhozam said:
Have you tried looking at this thread? http://forum.xda-developers.com/showthread.php?t=2735235
Click to expand...
Click to collapse
Yes i have Do i have to flash the whole firmware? Or is it enough to flash te stock recovery? should be okay i think..
MICH_** said:
Yes i have Do i have to flash the whole firmware? Or is it enough to flash te stock recovery? should be okay i think..
Click to expand...
Click to collapse
If you're already on stock Sense 6 before doing these steps, I would think flashing stock recovery is enough. Then you can manually boot into the OS and do a factory reset from within the settings, before sending it off for warranty repairs.
MrKhozam said:
If you're already on stock Sense 6 before doing these steps, I would think flashing stock recovery is enough. Then you can manually boot into the OS and do a factory reset from within the settings, before sending it off for warranty repairs.
Click to expand...
Click to collapse
okay, thank you! do you think i should go s-on? (i heard about may risks when going back s-on)
MICH_** said:
okay, thank you! do you think i should go s-on? (i heard about may risks when going back s-on)
Click to expand...
Click to collapse
You can try spoofing S-ON status through hboot. I have not tried this before, so proceed with caution. You can read about it here: http://forum.xda-developers.com/showthread.php?t=2708721.
MrKhozam said:
You can try spoofing S-ON status through hboot. I have not tried this before, so proceed with caution. You can read about it here: http://forum.xda-developers.com/showthread.php?t=2708721.
Click to expand...
Click to collapse
Does it work to flash files (.zip & recovery) with a locked bootloader but s-off? And is it possible to get s-on with a locked bootloader?
Okay, thanks guys! I just "stocked" my phone The only thing that´s left is s-off. Do you recommend to go back s-on?
I successfully returned my M8 back to full stock (no root, locked bootloader and S-On). I wrote about my experiences here: http://forum.xda-developers.com/showpost.php?p=55374704&postcount=7
I need an HTC One M8 Telus/Koodo RUU for my phone. I flashed GPE Rom and it works great but i want the 5.0 update of my carrier but i can't flash it because i am on a custom rom so i would like to revert back to stock in order to flash the 5.0 update.
Any help or suggestion would be appreciated
marawan31 said:
I need an HTC One M8 Telus/Koodo RUU for my phone. I flashed GPE Rom and it works great but i want the 5.0 update of my carrier but i can't flash it because i am on a custom rom so i would like to revert back to stock in order to flash the 5.0 update.
Any help or suggestion would be appreciated
Click to expand...
Click to collapse
Go back to stock, and take the OTAs. Then re-root and enjoy your new firmware.
Visit this thread:
http://forum.xda-developers.com/showthread.php?t=2701376
or this thread:
http://forum.xda-developers.com/showthread.php?t=2710735
I cant do that because i am not s-off
marawan31 said:
I cant do that because i am not s-off
Click to expand...
Click to collapse
Incorrect. This is the method that you use if you are not S-Off.
If you were S-Off, you would just update firmware manually, with no need to go back to stock.
thanks for your help!
ok the second link you posted led me to a canadian nandroid backup.
thanks a lot for your help man
Edit: my hboot is 3.18 and its the only one missing
what should i do?
marawan31 said:
thanks for your help!
ok the second link you posted led me to a canadian nandroid backup.
thanks a lot for your help man
Edit: my hboot is 3.18 and its the only one missing
what should i do?
Click to expand...
Click to collapse
I would suggest asking if anyone has a link to one in that thread.
I'm on Telus too, but I am running WWE firmware. I ALWAYS have the new firmware before Telus. Just sayin.
S-Off is a good thing to have. I know it seems like $25 is a lot to pay to get it, but if you think of all the hassle it saves trying to update firmware, and the other freedom it gives you (I'm using the Sprint Harman/Kardon version's audio files and ADSP) it is very reasonably priced.
xunholyx said:
I would suggest asking if anyone has a link to one in that thread.
I'm on Telus too, but I am running WWE firmware. I ALWAYS have the new firmware before Telus. Just sayin.
S-Off is a good thing to have. I know it seems like $25 is a lot to pay to get it, but if you think of all the hassle it saves trying to update firmware, and the other freedom it gives you (I'm using the Sprint Harman/Kardon version's audio files and ADSP) it is very reasonably priced.
Click to expand...
Click to collapse
i just flashed the one saying 3.x. its a 5.0 nandroid backup and all is working except wifi for some weird reason. looks like the firmware wasnt updated.
i have nothing against paying 25$ its just that sunshine never worked for me. It always said it didnt like my kernel and that i should try with a stock and i was too lazy tbh
marawan31 said:
i just flashed the one saying 3.x. its a 5.0 nandroid backup and all is working except wifi for some weird reason. looks like the firmware wasnt updated.
i have nothing against paying 25$ its just that sunshine never worked for me. It always said it didnt like my kernel and that i should try with a stock and i was too lazy tbh
Click to expand...
Click to collapse
Use 3.34.661.4 backup for 4.4.4 but wifi will not work on your device yet because you have hboot 3.18.0000
Find the 2.23.661.2 -> 3.34.661.4 - thanks @shaboobla on this thread : http://forum.xda-developers.com/showthread.php?t=2701376
Extract out firmware.zip from that OTA zip (with 7-zip)
then you can flash this firmware in RUU mode (but you need to relock bootloader because your device is S-On)
Later .. you can check software update and accept OTA to 4.20.661.2
ckpv5 said:
Use 3.34.661.4 backup for 4.4.4 but wifi will not work on your device yet because you have hboot 3.18.0000
Find the 2.23.661.2 -> 3.34.661.4 - thanks @shaboobla on this thread : http://forum.xda-developers.com/showthread.php?t=2701376
Extract out firmware.zip from that OTA zip (with 7-zip)
then you can flash this firmware in RUU mode (but you need to relock bootloader because your device is S-On)
Later .. you can check software update and accept OTA to 4.20.661.2
Click to expand...
Click to collapse
how would i flash a firmware in RUU mode? you mean like renaming it to some weird name like PG.... and placing it in root of sdcard and going in fasboot? or is it something else because tbh i have never heard of flashing something in RUU mode
thanks for your help, really appreciate it.
EDIT: I just found out i can go to RUU mode with "fastboot oem rebootRUU".
so i can flash the firmware with "fastboot flash zip firmware.zip"
thanks again for all your help guys
marawan31 said:
how would i flash a firmware in RUU mode? you mean like renaming it to some weird name like PG.... and placing it in root of sdcard and going in fasboot? or is it something else because tbh i have never heard of flashing something in RUU mode
thanks for your help, really appreciate it.
EDIT: I just found out i can go to RUU mode with "fastboot oem rebootRUU".
so i can flash the firmware with "fastboot flash zip firmware.zip"
thanks again for all your help guys
Click to expand...
Click to collapse
You found it
1. Make sure you restore the 3.34.661.4 backup first and reboot
2. Boot to bootloader
3. relock bootloader - fastboot oem lock
4. flash the firmware in RUU mode
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip <---- again for the 2nd time
fastboot reboot
5. check software update
6. accept, download, install
7. done
Flash TWRP 2.8.5.0 if you want to flash a custom ROM
ckpv5 said:
You found it
1. Make sure you restore the 3.34.661.4 backup first and reboot
2. Boot to bootloader
3. flash the firmware in RUU mode
fastboot oem rebootRUU
fastboot flash zip hbootMOD3.zip
fastboot flash zip hbootMOD3.zip <---- again for the 2nd time
fastboot reboot
4. check software update
5. accept, download, install
6. done
Flash TWRP 2.8.5.0 if you want to flash a custom ROM
Click to expand...
Click to collapse
You renamed the firmware to hbootMOD3.zip? or do i also need to flash the hboot? if so which hboot do i flash?
lol sorry im easily confused
marawan31 said:
You renamed the firmware to hbootMOD3.zip? or do i also need to flash the hboot? if so which hboot do i flash?
lol sorry im easily confused
Click to expand...
Click to collapse
Ahh.. sorry ... I was in a hurry ... just copy paste from my own note that meant for my personal modded firmware. Edited the post.
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip <---- again for the 2nd time
fastboot reboot
ckpv5 said:
Ahh.. sorry ... I was in a hurry ... just copy paste from my own note that meant for my personal modded firmware. Edited the post.
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip <---- again for the 2nd time
fastboot reboot
Click to expand...
Click to collapse
oh ok thanks man!!
ill post back with the result
marawan31 said:
oh ok thanks man!!
ill post back with the result
Click to expand...
Click to collapse
Just don't forget to relock bootloader before flashing firmware.zip
fastboot oem lock
ckpv5 said:
Just don't forget to relock bootloader before flashing firmware.zip
fastboot oem lock
Click to expand...
Click to collapse
yea i was going to do it and also for the sake of completeness flashing the stock recovery(3.34.661.4) after the restore, just in case someone else has the same problem
You can do that but not really needed because the signed firmware.zip will restore stock recovery.
ckpv5 said:
You can do that but not really needed because the signed firmware.zip will restore stock recovery.
Click to expand...
Click to collapse
oh didnt know that, i guess i wont then
I just wanted to thank you guys for helping me out!
I did everything and now i am on android 5.0.1 (although i ran into a small problem: process com.android.phone is not responding, factory reset from recovery fixed it)
Hope this thread helps someone else with similar problems
https://photos.google.com/album/AF1QipNmb1q2tT6uldWZLHQSLD1fsauQYRMlkHmA5y1g/photo/AF1QipPXGvhZ063BpX0f30U4O7d6ZYQgTkgeowCWDywd
Sorry for reviving such an old thread, but I'm trying to get my htc one m8 up and running again. It was functioning on lineage os but wasn't very stable, couldn't find any other roms that would successfully flash on it, I decided to try and go back to stock after a few beers one night night, now the phone has been sitting in a drawer with no os or recovery on it. There doesn't seem to be any still functioning links to any Canadian RUU's that I can use. I'm not s-off, bootloader is "relocked". I'd like to go back to stock marshmallow because I only use this thing to play music and as a tv remote. I'm hoping someone might have an old RUU lying around.
I guess if not my best option is just to unlock the bootloader again and try flashing the same lineage os again. Since I relocked does that mean I have to go through the htc website to get the unlock token again like I did ages ago? They probably don't even have this phone on there anymore. Hopefully I didn't actually turn this thing into a brick.
Please see my comments in red font below:
350Rocket said:
https://photos.google.com/album/AF1QipNmb1q2tT6uldWZLHQSLD1fsauQYRMlkHmA5y1g/photo/AF1QipPXGvhZ063BpX0f30U4O7d6ZYQgTkgeowCWDywd
Photo link is coming up with 404 error for me. Better to do fastboot getvar all, then post the results (cut and paste from command prompt), so we can see all the info on the phone (delete IMEI and serial number before posting).
Sorry for reviving such an old thread, but I'm trying to get my htc one m8 up and running again. It was functioning on lineage os but wasn't very stable, couldn't find any other roms that would successfully flash on it,
If you can be more specific about which ROMs you tried (plus info about your device from getvar as noted above), then we might be able to advise why they did not flash. Did you get error messages, and if so, what exactly were they?
I decided to try and go back to stock after a few beers one night night, now the phone has been sitting in a drawer with no os or recovery on it.
What exactly did you do (step by step, with any relevant file names, etc. - more detail is better).
I presume you intentionally relocked the bootloader in attempt to run some RUU. But would like clarification on this (and where that happened in the sequence of events)
There doesn't seem to be any still functioning links to any Canadian RUU's that I can use. I'm not s-off, bootloader is "relocked". I'd like to go back to stock marshmallow because I only use this thing to play music and as a tv remote. I'm hoping someone might have an old RUU lying around.
Far as I know, Canadian versions don't have RUU.
I guess if not my best option is just to unlock the bootloader again and try flashing the same lineage os again. Since I relocked does that mean I have to go through the htc website to get the unlock token again like I did ages ago? They probably don't even have this phone on there anymore. Hopefully I didn't actually turn this thing into a brick.
One option (maybe the best one) is to restore a stock TWRP back from the collection: https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
You will need to unlock the bootloader to do this. You can either reuse the unlock bin code you used originally (if you still have it). Otherwise, you should be able to request a new bin code from HTCDev.com. Far as I know, that still works for this phone.
Click to expand...
Click to collapse
Hi guys,
I have an HTC One M9 Dev Edition. It is rooted, bootloader unlocked (since dev ed) and s-on. I had 2.8.617.4. I have been getting notifications to update it to 2.11.xxx.x, but since I was rooted, I couldn't update. So I thought of reverting back to stock to get the OTA. I booted to recovery (TWRP 2.8.7.0), tried restoring to the nandroid system that I had a backup of. That failed, with system is read only error or similar error message. So I followed step 5 from this guide - http://forum.xda-developers.com/one-m9/general/best-unlocking-bootloader-rooting-guide-t3087354.
After finishing the steps, my phone is now stuck on the htc logo. I'm not sure what is wrong. I can boot into recovery. One thing I notice is when I boot to download mode, I still see the OS as 2.8.617.4. I tried flashing system again, I still see the same thing and the same problem. I need your help fixing this. Thanks.
Step 5 in that guide says "Coming Soon"?
Are you on stock recovery or twrp?
I sincerely hope you did not lock your bootloader without ticking "allow oem unlock" in developer settings.
iElvis said:
Step 5 in that guide says "Coming Soon"?
Are you on stock recovery or twrp?
I sincerely hope you did not lock your bootloader without ticking "allow oem unlock" in developer settings.
Click to expand...
Click to collapse
Oh, I'm sorry, I meant Extra Section after step 5. No, I didn't lock my bootloader. I'm on dev edition, so my bootloader was unlocked right from the beginning.
I am on stock recovery. But I can flash twrp. My download mode is working, and I am able to flash different images, so I don't think my phone is bricked or anything.
At this point, I just need to get my phone back to a working condition. I'm sure someone can tell me how to do that.
Edit: Can it be because I tried to flash an older firmware (1.32.617.3) than what I currently have (2.8.617.4)?
slvrhwk said:
Edit: Can it be because I tried to flash an older firmware (1.32.617.3) than what I currently have (2.8.617.4)?
Click to expand...
Click to collapse
Good, don't relock.
That is almost certainly your problem. You just need to get back to current stock to take the ota. That thread is out of date IMO. You should look at one of the other back to stock threads, though ignore statements about relocking.
iElvis said:
Good, don't relock.
That is almost certainly your problem. You just need to get back to current stock to take the ota. That thread is out of date IMO. You should look at one of the other back to stock threads, though ignore statements about relocking.
Click to expand...
Click to collapse
I downloaded a system image of the current version of OS I am at. Do you think flashing that will work?
You probably have an bootloop because of the kernel.You are S-ON user so you probably have to flash the right (stock) kernel for the untouched system.img you have flashed.
If you try to make a wipe to data partition (even better a factory restore) could also help you but you are going to lose all your data.
If you want to flash a stock kernel (boot.img) just extract it from the same RUU you extracted system.img .
In order to flash it give the command
Code:
fastboot flash boot boot.img
After that give the command
Code:
fastboot getvar all
and copy-paste everything here (except your IMEI number).
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
There is always a recovery installed. Either the stock one or the custom one. What does it do when you go to the recovery?
10rdan said:
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
Click to expand...
Click to collapse
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Click to expand...
Click to collapse
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
10rdan said:
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
Click to expand...
Click to collapse
Yes i think it does work again. But that's a try and find out. There is always the possibility i could be wrong.
Edit :
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files.
Click to expand...
Click to collapse
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
jollywhitefoot said:
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
Click to expand...
Click to collapse
That's new to me. Hopefully it isn't just tied to the developers edition then.
Thanks for the information
Mr Hofs said:
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Click to expand...
Click to collapse
I'll bare that in mind, will unlock tomorrow again and try newer twrp. Only reason I relocked was to run ruu to get phone running again.
jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
Where can I find 3.0.2.2, can only see 3.0.2.0 on twrp site?
Cheers
Edit.... Found it. ?
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
10rdan said:
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
Click to expand...
Click to collapse
I'm not exactly sure, but up until 3.0.2.2 Captain Throwback didn't even have the device and was working blind. I know he was trying different things to make it compatible with different variants, too, so in my mind that was a test build. I'm not sure why they have it on the downloads page. For me, I always download it from the download section of the twrp thread.