I randomly realized my G4 wasn't rotating the screen anymore and I have since tried everything - factory resetting, calibrating the sensor (doesn't work) and even the banging phone on table method, none are successful.
This may indicate that it is a hardware issue but if I hold the phone landscape and open the camera the buttons do rotate, but if I rotate whilst already inside the app nothing changes so I'm not exactly sure what is going on. When I use the app CPU-Z to track the accelerometer value it stays static until I turn the screen off and move the phone a bit, when I turn it on the value changes again but stays still.
Any idea what the cause is??
does booting into safe mode make any difference (i know you said factory reset, but I'm curious).
Also, probably won't, but is there any difference whilst the phone is charging?
Throwing this out there. Did you debloat? On the Samsung models, if you uninstall the Hub app, rotation gets broken for some weird reason. I don't know what that would be on the G4, but maybe? Just a random guess.
lawrence750 said:
does booting into safe mode make any difference (i know you said factory reset, but I'm curious).
Also, probably won't, but is there any difference whilst the phone is charging?
Click to expand...
Click to collapse
I'll try booting into safe mode, and there's no difference while charging.
pre4speed said:
Throwing this out there. Did you debloat? On the Samsung models, if you uninstall the Hub app, rotation gets broken for some weird reason. I don't know what that would be on the G4, but maybe? Just a random guess.
Click to expand...
Click to collapse
I believe I did remove a few apps but since I factory reset and flashed a fresh image I believe they should be restored?
wilfred888 said:
I'll try booting into safe mode, and there's no difference while charging.
I believe I did remove a few apps but since I factory reset and flashed a fresh image I believe they should be restored?
Click to expand...
Click to collapse
Not necessarily. I know a factory reset doesn't restore any previously removed apps, and flashing factory a fresh image depends on how it's flashed I've discovered. Only a CSC restores the phone to factory specs, while other methods didn't for me.
pre4speed said:
Not necessarily. I know a factory reset doesn't restore any previously removed apps, and flashing factory a fresh image depends on how it's flashed I've discovered. Only a CSC restores the phone to factory specs, while other methods didn't for me.
Click to expand...
Click to collapse
Safe mode didn't help, and I actually don't know which ones I removed but they looked pretty normal, how do I check or compare vs stock?
wilfred888 said:
Safe mode didn't help, and I actually don't know which ones I removed but they looked pretty normal, how do I check or compare vs stock?
Click to expand...
Click to collapse
I think I recall seeing a debloat list somewhere. See if you can find it and compare what you've got. I'm not saying this is the problem, but it could be.
pre4speed said:
I think I recall seeing a debloat list somewhere. See if you can find it and compare what you've got. I'm not saying this is the problem, but it could be.
Click to expand...
Click to collapse
Yeah I found a few lists but they only have apps that are safe to remove and don't warn or mention possible ones that cause problems which I may have already removed
wilfred888 said:
I randomly realized my G4 wasn't rotating the screen anymore and I have since tried everything - factory resetting, calibrating the sensor (doesn't work) and even the banging phone on table method, none are successful.
This may indicate that it is a hardware issue but if I hold the phone landscape and open the camera the buttons do rotate, but if I rotate whilst already inside the app nothing changes so I'm not exactly sure what is going on. When I use the app CPU-Z to track the accelerometer value it stays static until I turn the screen off and move the phone a bit, when I turn it on the value changes again but stays still.
Any idea what the cause is??
Click to expand...
Click to collapse
I had the exact problem a few weeks ago, thought my hardware was already flaking. Don't remember what I did to get it working, but it wasn't overly complex.. Rebooting didn't help, I think I pulled the battery, waited a bit, and then rebooted and then went to calibration from there.
Do you happen to have xposed installed by the way?
Sent from my LG-H812 using XDA Free mobile app
strikelight said:
I had the exact problem a few weeks ago, thought my hardware was already flaking. Don't remember what I did to get it working, but it wasn't overly complex.. Rebooting didn't help, I think I pulled the battery, waited a bit, and then rebooted and then went to calibration from there.
Do you happen to have xposed installed by the way?
Sent from my LG-H812 using XDA Free mobile app
Click to expand...
Click to collapse
Hey thanks for your reply, I am trying now the battery pulling method, did you then calibrate through the sensor in display settings?
And yeah I do, hmm not sure if it stopped working after that actually.. but I remember after I flashed a fresh .kdz even without xposed it still doesn't work.
wilfred888 said:
Hey thanks for your reply, I am trying now the battery pulling method, did you then calibrate through the sensor in display settings?
And yeah I do, hmm not sure if it stopped working after that actually.. but I remember after I flashed a fresh .kdz even without xposed it still doesn't work.
Click to expand...
Click to collapse
Yea would have been the calibration from the regular settings.
As for xposed, flashing a kdz will keep user data and settings.. It might have been gravitybox causing the issue for me, which if you uninstall that, reboot and reinstall it, might help. Same goes for any other modules you had enabled.
Sent from my LG-H812 using XDA Free mobile app
strikelight said:
Yea would have been the calibration from the regular settings.
As for xposed, flashing a kdz will keep user data and settings.. It might have been gravitybox causing the issue for me, which if you uninstall that, reboot and reinstall it, might help. Same goes for any other modules you had enabled.
Sent from my LG-H812 using XDA Free mobile app
Click to expand...
Click to collapse
Oh yeah it did but I factory reset as well so... I never installed gravitybox since I heard there were some problems with it but I'll see if there are any modules causing issues.
Silly question: Have you tried clicking the rotation icon in the pull-down notifications bar?
alamo76 said:
Silly question: Have you tried clicking the rotation icon in the pull-down notifications bar?
Click to expand...
Click to collapse
Yeah I have I don't even know there are signs that point towards it being a hardware or a software issue tbh.
Problem happened to me too. Started yesterday, sometimes worked, sometimes stuck on portrait.
Shutting down and pulling the battery for a few seconds seems to do the trick. It works properly now..
Have you been used apps which could calibrate the accelerometer before?
etc. some games that needs to be controlled by rotating the phone on its axis..
onotor said:
Have you been used apps which could calibrate the accelerometer before?
etc. some games that needs to be controlled by rotating the phone on its axis..
Click to expand...
Click to collapse
Me? Not that I know. Some new apps yes, but still proper screen rotation.
This problem happened on my g4 today...
Stock ROM?
LG 4 not rotating??
quick fix which worked for me was just take the battery out, wait 30 seconds, put back in switch on and problem solved...
hope this helps guys.... regards Steve
Related
Ive searched everywhere and can't seem to find anyone with a solution. Ive found a post with the same problem but no solution.
So yesterday my s3 started having problems waking up. Meaning when I lock it usually you bring up the lock screen by pressing the power button or home button. Problem is when I press either one, screen doesnt come on. The buttons do. If I tap the screen I can hear the ripple effect but the screen doesnt light up. I have to keep locking and unlocking till it finally works. Averege of about 6 tries. When I get a call most of the time the screen doesnt come on either. I can still answer since I know where the slider is. When I do turn it on everything works perfect. No flickering or any other issues. When it boots it works perfect...never fails. Just when I lock it.
I tried restoring already, thinking its a software issue...still does it. What piece of hardware could cause this? I'm stumped. Please any advice would be great.
I'm not rooted and running 4.1.1 oem rogers software.
Sent from my SGH-I747M using xda app-developers app
felcom said:
Ive searched everywhere and can't seem to find anyone with a solution. Ive found a post with the same problem but no solution.
So yesterday my s3 started having problems waking up. Meaning when I lock it usually you bring up the lock screen by pressing the power button or home button. Problem is when I press either one, screen doesnt come on. The buttons do. If I tap the screen I can hear the ripple effect but the screen doesnt light up. I have to keep locking and unlocking till it finally works. Averege of about 6 tries. When I get a call most of the time the screen doesnt come on either. I can still answer since I know where the slider is. When I do turn it on everything works perfect. No flickering or any other issues. When it boots it works perfect...never fails. Just when I lock it.
I tried restoring already, thinking its a software issue...still does it. What piece of hardware could cause this? I'm stumped. Please any advice would be great.
I'm not rooted and running 4.1.1 oem rogers software.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
My guess is that you have something draining all your RAM or being hard on your CPU. When you restored, did you factory reset?
You might have to backup your stuff, factory reset. Test it, if it still does it, bring it up with Rogers for a replacement. If it doesn't, reinstall your stuff until you find the culprit.
You could troubleshoot it also by uninstalling the latest apps you installed.
BWolf56 said:
My guess is that you have something draining all your RAM or being hard on your CPU. When you restored, did you factory reset?
You might have to backup your stuff, factory reset. Test it, if it still does it, bring it up with Rogers for a replacement. If it doesn't, reinstall your stuff until you find the culprit.
You could troubleshoot it also by uninstalling the latest apps you installed.
Click to expand...
Click to collapse
Like I said...Already did a factory reset. Meaning All apps were gone. Started fresh. Even without going through the first setup (setting up google account etc etc) if I lock the phone its hard to wakeup.
Phone is out of warranty so no go there....
I'm just not understanding what is causing it. I know the screen is fine...buttons are fine...everything points at a software problem. I found a post from a while back where someone was having the same problem....no solution was posted though. I even took the phone apart last night thinking a bad connection or something...disconnected the screen and reconnected it...didn't do anything.
If the screen was going bad wouldn't I have issues all the time? Once I wakeup the phone it works perfect...no flickering or anything. When it boots (which I've done like 30 times between today and yesterday) the screen has come on every single time perfectly fine. Everything tells me it's software related...but after doing a factory reset and running original firmware it seems as though it must be a hardware issue...but which component.
I know the phone wakes up when I press the buttons...I can see the menu and back buttons light up...and if I tap the screen the ripple sound is there...just the screen doesn't wake up....till I try a few more times....very frustrating.
Thanks Again for trying...if anyone has any ideas....greatly appreciated. I'll try and find original Rogers firmware and install with odin...see if that works....
felcom said:
Like I said...Already did a factory reset. Meaning All apps were gone. Started fresh. Even without going through the first setup (setting up google account etc etc) if I lock the phone its hard to wakeup.
Phone is out of warranty so no go there....
I'm just not understanding what is causing it. I know the screen is fine...buttons are fine...everything points at a software problem. I found a post from a while back where someone was having the same problem....no solution was posted though. I even took the phone apart last night thinking a bad connection or something...disconnected the screen and reconnected it...didn't do anything.
If the screen was going bad wouldn't I have issues all the time? Once I wakeup the phone it works perfect...no flickering or anything. When it boots (which I've done like 30 times between today and yesterday) the screen has come on every single time perfectly fine. Everything tells me it's software related...but after doing a factory reset and running original firmware it seems as though it must be a hardware issue...but which component.
I know the phone wakes up when I press the buttons...I can see the menu and back buttons light up...and if I tap the screen the ripple sound is there...just the screen doesn't wake up....till I try a few more times....very frustrating.
Thanks Again for trying...if anyone has any ideas....greatly appreciated. I'll try and find original Rogers firmware and install with odin...see if that works....
Click to expand...
Click to collapse
Sounds indeed like software issue. I'm not so sure what would cause it on stock rogers though.
Either way, you can find the stock ROM on sammobile.com or on this thread: http://forum.xda-developers.com/showthread.php?t=1822308
You'll need Odin to flash it. (It doesn't trigger the flash counter)
felcom said:
Phone is out of warranty so no go there....
Click to expand...
Click to collapse
Did you buy your phone with a credit card? Some cc's have warranty built in. Mine doubles what the manufacturer offers.
Thanks for the link. I will try it tonight and post the results. Really hoping it works.
Sent from my SGH-I747M using xda app-developers app
I downloaded the newest firmware. 4.1.2 official rogers. Problem persists. Must be a hardware issue. Thing is what could cause this? Is it the screen...is it the gpu? I imagine if its gpu the phone is only good for parts as I imagine its part of the motherboard. Oh well...might be getting the s4 sooner then planned.
Sent from my SGH-I747M using xda app-developers app
felcom said:
I downloaded the newest firmware. 4.1.2 official rogers. Problem persists. Must be a hardware issue. Thing is what could cause this? Is it the screen...is it the gpu? I imagine if its gpu the phone is only good for parts as I imagine its part of the motherboard. Oh well...might be getting the s4 sooner then planned.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
If you're down for a little test, you could try with a custom ROM.
Use the link I gave you and flash pre-rooted Rogers' ROM. From there, install TWRP (or cwm) using goomanager (from the Play Store) and flash a custom ROM as per their instructions (Don't forget the Gapps).
Before anything though, make a backup
Never know, might save you some time on that S4.
BWolf56 said:
If you're down for a little test, you could try with a custom ROM.
Use the link I gave you and flash pre-rooted Rogers' ROM. From there, install TWRP (or cwm) using goomanager (from the Play Store) and flash a custom ROM as per their instructions (Don't forget the Gapps).
Before anything though, make a backup
Never know, might save you some time on that S4.
Click to expand...
Click to collapse
Thanks. I might try it. Dont think I have too much to lose at this point. I always try and keep my phones nice so that when I get a new one I can sell the old one for good money to help offset the cost. This really messes with that system as the phone isn't worth much now...just bought an extended battery too...was planning to keep it for at least another 6 months.
Sent from my SGH-I747M using xda app-developers app
So just a quick update. For no apparent reason the phone started working fine again. It now turns on and off just fine. I'm not going to mess around with it anymore. That's really bizzare. I'll give it a couple days and will report back if it continuous to work fine or if the problem comes back. Thanks for the input.
Sent from my SGH-I747M using xda app-developers app
So, I bought it on launch day and I'm getting desperate...
1) Wake screen after receiving notification (text etc). Pull down notification bar, back and multitask soft buttons grey out and phone will not respond. If I'm listening to music when this happens, the song keeps playing until I pull the battery or the phone reboots itself.
2) General lag is awful... More than half the time it has noticeable hangs switching apps or opening anything. I'm down to next to no apps that i've installed and have even tried removing just about everything I have with no improvement. Scrolling stutters about half the time as well. And the image you see with the camera open stutters badly also. Every once in a while it's buttery smooth for a few seconds then slows again.
Battery life is great and I love the form factor of this phone. I REALLY don't want to get rid of it but I'm at the point where it's more important to have a phone that's usable than have the extra screen size etc.
It's bone stock and I haven't tried a factory reset.
Suggestions?
Try the factory reset then go from there.
sonspot said:
Try the factory reset then go from there.
Click to expand...
Click to collapse
Or reflash the whole firmware using LGFlashTool. Might help.
Sent from my LG-D851
Well, I did the factory reset and no lockups or reboots yet. It's still really laggy though :-/
Gonna give it a while longer but I'm thinking it's time to root. What's the "hot setup" for the tmo version of this phone?
beyondinferno said:
Well, I did the factory reset and no lockups or reboots yet. It's still really laggy though :-/
Gonna give it a while longer but I'm thinking it's time to root. What's the "hot setup" for the tmo version of this phone?
Click to expand...
Click to collapse
Hot setup? Just use PurpleDrake.
Sent from my LG-D851
Skizzy034 said:
Hot setup? Just use PurpleDrake.
Sent from my LG-D851
Click to expand...
Click to collapse
I meant rom/mods. I've seen people mention 60fps mod for the camera but I was wondering if there was an international rom that worked with the d851 since we haven't seen any of the updates for this phone yet.
beyondinferno said:
I meant rom/mods. I've seen people mention 60fps mod for the camera but I was wondering if there was an international rom that worked with the d851 since we haven't seen any of the updates for this phone yet.
Click to expand...
Click to collapse
Delete.
beyondinferno said:
I meant rom/mods. I've seen people mention 60fps mod for the camera but I was wondering if there was an international rom that worked with the d851 since we haven't seen any of the updates for this phone yet.
Click to expand...
Click to collapse
We have the only unlocked bootloader. There are no international roms. SkyDragon is a good rom tho.
Sent from my LG-D851
I know there's another auto brightness thread but I think my problem is different. I'll turn it on, leave the phone in standby for a while, and when I use the phone again I find the auto brightness doesn't have the check mark there anymore? Has anyone else noticed this?
I was wondering why my battery was draining so fast when I was using it. That's when I realized my setting was at full brightness but the Auto had become unchecked so it was running at 100 constantly without auto adjusting. I've used the 100/Auto checked on all my other Samsung devices dating back to the Note 2 and S3.
I'm thinking it's a software glitch which will hopefully be fixed in a future update. If it is, I'll live with it for now...
I actually had the same issue and I found that the issue was related to game recorder app I just uninstalled and now is fine
Interesting... I don't have any kind of recorder apps so I'm kind of at a loss as to what other app could cause that...
diehardbattery said:
Interesting... I don't have any kind of recorder apps so I'm kind of at a loss as to what other app could cause that...
Click to expand...
Click to collapse
I'm suffering from this exact same issue. Very annoying because the auto brightness works well when it actually stays on.
NCSUgolfer01 said:
I'm suffering from this exact same issue. Very annoying because the auto brightness works well when it actually stays on.
Click to expand...
Click to collapse
For what it's worth, I started having other issues yesterday morning. When I first got the phone, and did the OTA, I did a factory reset as was widely recommended to do. Apparently it din't clear up everything.
What I ended up doing was, yesterday, I did another reset using the Samsung Smart Switch software. I backed up what I could, let it reset, and restored afterward. So far it's been 24 hrs and no issues.
I have the same problem with the auto brigthness with my galaxy S6 edge . but when i uninstall the car app from samsung its gone
maybe it works for you too
jekuper said:
I have the same problem with the auto brigthness with my galaxy S6 edge . but when i uninstall the car app from samsung its gone
maybe it works for you too
Click to expand...
Click to collapse
I'll try that and report back
jekuper said:
I have the same problem with the auto brigthness with my galaxy S6 edge . but when i uninstall the car app from samsung its gone
maybe it works for you too
Click to expand...
Click to collapse
I also uninstalled the car app and restarted the phone.
it was still happening, but now it ain't anymore.
if it does will post here again
godsboy7777 said:
I also uninstalled the car app and restarted the phone.
it was still happening, but now it ain't anymore.
if it does will post here again
Click to expand...
Click to collapse
Interesting.. car mode is the culprit? That's not the only bug in that app then. There's an option to auto close the app when the bluetooth connection is disconnected from the car.. it doesn't work for me.
But I'll just be sitting there doing something and if I'm in a dark room... WHAM I get blinded LOL...
I got a replacement today so I guess the saga continues...
diehardbattery said:
Interesting.. car mode is the culprit? That's not the only bug in that app then. There's an option to auto close the app when the bluetooth connection is disconnected from the car.. it doesn't work for me.
But I'll just be sitting there doing something and if I'm in a dark room... WHAM I get blinded LOL...
I got a replacement today so I guess the saga continues...
Click to expand...
Click to collapse
I installed Samsung Switch for pc and did a backup for my edge.
I then did a factory reset.
Restored the backup from Switch.
I also un-installed a Go battery saver application.
Since then no more auto-brightness switching itself off.
godsboy7777 said:
I installed Samsung Switch for pc and did a backup for my edge.
I then did a factory reset.
Restored the backup from Switch.
I also un-installed a Go battery saver application.
Since then no more auto-brightness switching itself off.
Click to expand...
Click to collapse
I did all of that, except for the app you removed. It behaved itself for a about 24 hrs and still came back. How long has it been for you?
jekuper said:
I have the same problem with the auto brigthness with my galaxy S6 edge . but when i uninstall the car app from samsung its gone
maybe it works for you too
Click to expand...
Click to collapse
diehardbattery said:
Interesting.. car mode is the culprit? That's not the only bug in that app then. There's an option to auto close the app when the bluetooth connection is disconnected from the car.. it doesn't work for me.
But I'll just be sitting there doing something and if I'm in a dark room... WHAM I get blinded LOL...
I got a replacement today so I guess the saga continues...
Click to expand...
Click to collapse
diehardbattery said:
I did all of that, except for the app you removed. It behaved itself for a about 24 hrs and still came back. How long has it been for you?
Click to expand...
Click to collapse
It has been more than 24 hours no probs, but I also have to say since doing this I have not touched the auto checkbox or slided the bar left or right at all.
did you?
I'm pretty sure I didn't... I don't remember doing anything of the sort LOL...
diehardbattery said:
I'm pretty sure I didn't... I don't remember doing anything of the sort LOL...
Click to expand...
Click to collapse
Have you updated all apps recently?
What is your specific phone model number?
All updates were done right after the restore. SM-G925T
diehardbattery said:
All updates were done right after the restore. SM-G925T
Click to expand...
Click to collapse
My phone model is SM-G925F
I've only noticed this since running the August security updated and its happened across three ROMs so far (Screwed, Pure Nexus, LOS (No gapps)). Sometimes the screen takes for ever to power up. Once it is up the lock screens responsiveness varies greatly. Not always in the same instance as the screen issue but when unlocking the device it will momentarily freeze. Sometimes locking itself again..
Curious if anyone has seen anything similar.
How are you restoring your apps when you flash a ROM? If you restore them from a Google cloud backup you could be restoring corrupted data that is causing the problem. I had that happen when a utility app completely screwed up the scrolling on my phone. I did a factory reset but restored my phone from a cloud backup and the problem came back exactly the same. The next day I did another factory reset but set up the phone as new and manually downloaded my apps from the Play Store. This time the problem was gone.
jhs39 said:
How are you restoring your apps when you flash a ROM? If you restore them from a Google cloud backup you could be restoring corrupted data that is causing the problem. I had that happen when a utility app completely screwed up the scrolling on my phone. I did a factory reset but restored my phone from a cloud backup and the problem came back exactly the same. The next day I did another factory reset but set up the phone as new and manually downloaded my apps from the Play Store. This time the problem was gone.
Click to expand...
Click to collapse
I'm restoring from tibu.
pcriz said:
I'm restoring from tibu.
Click to expand...
Click to collapse
I'm not sure if that could cause the same problem but presumably you are restoring app data along with the apps so it might be possible. Have you tried using the phone in safe mode to see if the problem still persists? It seems unlikely that what you are experiencing is a known issue with the August security update since we are more than halfway through the month without anyone else reporting a similar issue.
jhs39 said:
I'm not sure if that could cause the same problem but presumably you are restoring app data along with the apps so it might be possible. Have you tried using the phone in safe mode to see if the problem still persists? It seems unlikely that what you are experiencing is a known issue with the August security update since we are more than halfway through the month without anyone else reporting a similar issue.
Click to expand...
Click to collapse
It's happened without any apps installed as well. I haven't tried safe mode yet no
are you using immersive mode?
diabl0w said:
are you using immersive mode?
Click to expand...
Click to collapse
On screwed rom I was but I am getting it on PN and I don't run that rom in immersive mode.
pcriz said:
On screwed rom I was but I am getting it on PN and I don't run that rom in immersive mode.
Click to expand...
Click to collapse
I run the O preview and immersive mode causes that for me... I'm sure the custom roms are pulling commits that include this bug
diabl0w said:
I run the O preview and immersive mode causes that for me... I'm sure the custom roms are pulling commits that include this bug
Click to expand...
Click to collapse
Yeah that would make sense if you are seeing the same thing. I may jump back to a known good build and see what happens
I had a very similar issue with tremendous lag in screen on and unlocking.
It turned out to be Kernel related, I was using Kirisakura Harmony Kernel, while it was happening to me, I flashed Franco R8 kernel and all is well.
pTeronaut said:
I had a very similar issue with tremendous lag in screen on and unlocking.
It turned out to be Kernel related, I was using Kirisakura Harmony Kernel, while it was happening to me, I flashed Franco R8 kernel and all is well.
Click to expand...
Click to collapse
Thank you, I'll try that!
diabl0w said:
are you using immersive mode?
Click to expand...
Click to collapse
So I was experiencing REALLLY SLOW screen turn ons. Like it could take 30+ seconds. But the phone was awake as my LED was on, and fingerprint haptic feedback.
When looking for solutions, I found this post. I use Auto Hide Soft Keys, to hide my status bar and nav bar when I dont need them. When disabling (and even after re-enabling), the problem was fixed (for now anyways)
Can you elaborate on this post? Do you have some experience with nav bar hiding causing slow screen turn ons?
p1r473 said:
So I was experiencing REALLLY SLOW screen turn ons. Like it could take 30+ seconds. But the phone was awake as my LED was on, and fingerprint haptic feedback.
When looking for solutions, I found this post. I use Auto Hide Soft Keys, to hide my status bar and nav bar when I dont need them. When disabling (and even after re-enabling), the problem was fixed (for now anyways)
Can you elaborate on this post? Do you have some experience with nav bar hiding causing slow screen turn ons?
Click to expand...
Click to collapse
Check this thread. ?
https://forum.xda-developers.com/pi...e-problems-t3666479/post73629247#post73629247
SOLVED. See my last post.
No notification or anything. It turned on with Benzo rom and now I am on fresh stock with a custom kernel and it still turns on. How do I monitor the device to determine what might be causing it to turn on? It started with March update. I didn't have this issue on the January update.
Is there an app I can install to see what turns the display on or is this something I must do on a pc?
b4u2 said:
No notification or anything. It turned on with Benzo rom and now I am on fresh stock with a custom kernel and it still turns on. How do I monitor the device to determine what might be causing it to turn on? It started with March update. I didn't have this issue on the January update.
Is there an app I can install to see what turns the display on or is this something I must do on a pc?
Click to expand...
Click to collapse
Which custom kernel? And try safemode to see if problem still persists. If safemode fixes it it is an app
shagbag913 said:
Which custom kernel? And try safemode to see if problem still persists. If safemode fixes it it is an app
Click to expand...
Click to collapse
I'm using Holy dragon Kernel.
I put the device in Safe Mode for most of the day and never saw the display turn on like before. So it must be an app. How would I go about narrowing down which app is causing the problem?
b4u2 said:
I'm using Holy dragon Kernel.
I put the device in Safe Mode for most of the day and never saw the display turn on like before. So it must be an app. How would I go about narrowing down which app is causing the problem?
Click to expand...
Click to collapse
If you could get a logcat I might be able to go through it for you.
shagbag913 said:
If you could get a logcat I might be able to go through it for you.
Click to expand...
Click to collapse
Would that be an app or by using ADB?
b4u2 said:
Would that be an app or by using ADB?
Click to expand...
Click to collapse
To grab logs you can use either just make sure if you use an app you grant it root permissions
Here are two screenshots I took after the screen turned on with no notifications present. I have no clue what to look for. Hopefully this helps. Is the whole log needed? I turn Matlog on and then turn the screen off until the "error" happens. Then I turn screen on and do the screenshot.
b4u2 said:
Here are two screenshots I took after the screen turned on with no notifications present. I have no clue what to look for. Hopefully this helps. Is the whole log needed? I turn Matlog on and then turn the screen off until the "error" happens. Then I turn screen on and do the screenshot.
Click to expand...
Click to collapse
That is exactly what you should've done. I will have a look and maybe we can find the problem. A list of your apps would make it quite a bit easier too
Here are some more that hopefully caught whatever is happening.
b4u2 said:
Here are some more that hopefully caught whatever is happening.
Click to expand...
Click to collapse
Do you have an app like an image downloader? Also does campmobile sound familiar?
shagbag913 said:
Do you have an app like an image downloader? Also does campmobile sound familiar?
Click to expand...
Click to collapse
I have Avairy, Collage maker, Image editor, Layout, Snapseed? No clue what campmobile is.
I uninstalled a bunch of apps that I don't use on a daily basis. I removed all of the above plus Verizon message, Allo, Duo, Tapatalk, Forest river forums, NFL mobile, NFL network, ESPN, and maybe a few others Display still randomly turns on.
This is so annoying that I can't figure out what keeps turning the display on.
Are you using any custom kernel settings that don't get set in safemode? Set on boot etc..
DR3W5K1 said:
Are you using any custom kernel settings that don't get set in safemode? Set on boot etc..
Click to expand...
Click to collapse
Honestly not sure. I just use the settings that come with the kernel.
We'll that could potentially be the problem. Try it with the stock kernel for testing?
DR3W5K1 said:
We'll that could potentially be the problem. Try it with the stock kernel for testing?
Click to expand...
Click to collapse
So just flash the stock zip on slot B?
b4u2 said:
So just flash the stock zip on slot B?
Click to expand...
Click to collapse
The best way to try it without losing anything imo.
Just "fastboot flash-all.bat" after you open the .bat and editing out the "-w".
DR3W5K1 said:
The best way to try it without losing anything imo.
Just "fastboot flash-all.bat" after you open the .bat and editing out the "-w".
Click to expand...
Click to collapse
I just did that and will now wait to see what happens.
Update: Display still turns on what's my next step?
Well that sums it up only a factory reset to try now.
If it still persist then your phone is fubar.
DR3W5K1 said:
Well that sums it up only a factory reset to try now.
If it still persist then your phone is fubar.
Click to expand...
Click to collapse
I did a full wipe last night. So far so good but it's early yet.
Four hours and still no sign of display randomly turning on. I installed magisk and my custom kernel. So far I only turned on/logged into apps I needed right now.