Related
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
Yes you can go to software number to get the info you need. To do an OTA you need a stock sense ROM (NO CHANGES TO ANY SYSTEM APPS) you then need to flash the correct recovery for your software number and [IMPORTANT] relock the bootloader. You then can reboot into your system and take the OTA while still being able to unlock the bootloader and flash a custom recovery afterwards.
No need to relock the bootloader for an ota. People should stop spreading that info
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
ericksonline said:
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
Click to expand...
Click to collapse
Yup you're good ROM wise. Just flash the stock recovery and you should be good to go.
You can be unlock and have OTA.
You just need a stock recovery.
HTC ONE M8 fails to load up after failed software update
Hello guys, this is my first post. I really need your help as I'm at risk of loosing all my phone data. My phone internal memory had been exhausted and I bought an external SD card. I am unable to transfer data to the external SD card. I was doing a software update on my phone that failed to install, there was a warning sign on the phone screen for a few minutes then it try to power on but has failed, as it's seem to stuck on the screen that display htc powered by android. I tried the recovery holding down the power button and the column up button, the phone power off and back on but is still stuck on this screen (htc powered by android). I tried connecting the phone to my laptop to try and recover my data, but it's not mounting to the laptop. Please can someone help me. Thanks in advance.
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
jbarr3 said:
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
Click to expand...
Click to collapse
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
ericksonline said:
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
Click to expand...
Click to collapse
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
jbarr3 said:
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
Click to expand...
Click to collapse
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
ericksonline said:
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
Click to expand...
Click to collapse
Thanks erick but given what's happened I don't think I'll ever update from the playstore again. I'll load 2.16 using TWRP and report back. I can't stress enough how important it is to have a nandroid backup. I reckon its the best reason to load a custom recovery. Its got me out of trouble twice now and gives me piece of mind. I've actually gone overboard on this and I have two backups on my phone which I have copied to my PC..
vm54 said:
You can be unlock and have OTA.
You just need a stock recovery.
Click to expand...
Click to collapse
And stock ROM.
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
jbarr3 said:
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
Click to expand...
Click to collapse
Awesome! I'm glad to hear that it worked!
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Well, then I wanted to get a custom ROM, so I flashed the Cyanogenmod 12, along with the component with it.
I found I didn't like it compared to my 5.0.2 Lolipop, and so I tried finding the stock ROM.
The gator download site everyone was showing refused to let me download anything, and just about all the ROMS seemed like they were from countries other than the U.S.
I searched for awhile, found nothing, then found a ROM called the Ironman Lolipop ROM, it was close enough to stock, so I flashed it.
Suddenly everything was normal, but then supersu needed binaries again, and after I flashed it again, it just stopped asking if it should grant permission, making the root useless.
Frustrated, I looked online again for ROMS, found a Canada one, decided to download, it would take two hours.
Well I'm not from Canada so I doubted it would work, and didn't want to wait two hours.
I decided to Flash back the Cyanogen.
Well unfortunately I went in and found out that I had deleted it earlier, whoops. And so my data wipe brought me back to Ironman ROM.
So, thinking that flashing to Iron Man screwed up my root I tried to re-root with Odin, the same way as the first.
It then had trouble booting, and when it did, it hung at the Samsung logo.
Now I've been stuck on this logo for about an hour, I can't turn it off. I'm assuming the only way to is to wait for it to run out of power.
I have been using TWRP this whole time.
I twice have backed up, and wiped data.
When I hit restore I saw no backups though, I'm not sure if they were for the ROM?
I don't know, I only have a year of experience.
Edit: I have an 8.1" T700 from Amazon.
pennylessz said:
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Bla bla ......
Click to expand...
Click to collapse
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download): https://www.androidfilehost.com/?fid=24052804347761130
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
DUHAsianSKILLZ said:
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download):
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
Click to expand...
Click to collapse
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
pennylessz said:
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
Click to expand...
Click to collapse
In my files app, look for an folder called TWRP. Your backups are in there. To root simply install twrp and follow the twrp method to root. http://forum.xda-developers.com/showthread.php?p=59638836
You can delete your backups from within twrp. Just select restore, then the backup, then delete.
Hello, I made a noob mistake the other day and now my tablet won't stop popping up with gapps crashing messages.
Here's what I did:
I was in titanium Backup, I wanted to integrate updated apps into the ROM, when it got to some Google Apps it wouldn't continue on. So then I had the wonderful idea of rebooting the device to get it to stop trying to integrate the app (probably mistake #2...). Afterwards it started spitting out the loop of gapps crashing messages. I found a zip file of gapps for my version of Android online, put that on the SD card, and tried installing them in safe mode, but that hasn't helped at all.
Currently I have root, but no custom recovery and no stock ROM. I found this thread:
http://forum.xda-developers.com/lg-g-pad-83/general/firmware-lg-vk815-verizon-lg-gpad-x8-3-t3131399
It leads to a supposed stock ROM for the verizon VK815, but I can't download it or understand fully the steps to use it. Could anyone point me in the direction of what to do next (aside from stopping doing things that I don't know how to do)?
S.82 said:
Hello, I made a noob mistake the other day and now my tablet won't stop popping up with gapps crashing messages.
Here's what I did:
I was in titanium Backup, I wanted to integrate updated apps into the ROM, when it got to some Google Apps it wouldn't continue on. So then I had the wonderful idea of rebooting the device to get it to stop trying to integrate the app (probably mistake #2...). Afterwards it started spitting out the loop of gapps crashing messages. I found a zip file of gapps for my version of Android online, put that on the SD card, and tried installing them in safe mode, but that hasn't helped at all.
Currently I have root, but no custom recovery and no stock ROM. I found this thread:
http://forum.xda-developers.com/lg-g-pad-83/general/firmware-lg-vk815-verizon-lg-gpad-x8-3-t3131399
It leads to a supposed stock ROM for the verizon VK815, but I can't download it or understand fully the steps to use it. Could anyone point me in the direction of what to do next (aside from stopping doing things that I don't know how to do)?
Click to expand...
Click to collapse
I am not really sure how to help you here. Have you tried to do a factory reset?
We have root access on the 815 tablet, so you can always manually copy APK files over. My best guess is to ADB push all of the files from a Lollipop GAPPS package.
Do you know which one is barking at you? We do not have a custom recovery yet to flash GAPPS, but I have never known one to be able to flash a GAPPS package over a stock rom.
I found a system dump of the X8.3, I'll try pushing the gapps files from that. I'm not sure which one it is, so I think I'll just push them all. It's been a long time since I had an Android, so it might take me a bit to figure out how to set up ADB and push files again.
Thanks for the idea
I can't push files to it at all, it will only mount as read only in ADB, I also can't install with ADB, it gets some UID error. adb root just tells me it can't be done in production builds. Pretty much all I can do with adb is adb shell -> su.
Any idea on how to push the files? I tried googling around a bunch and can't find anything.
I tried a factory reset, it still gets the loop, so the only change is now I can't get past the setup UI. I might have to just wait for there to be a stock image to flash that I can access or a custom recovery or custom rom..
Try the official LG Flash Tool (not LG Flash Tool 2014) on Windows PC, which will download the right KDZ and flash it?
First make sure you have the latest LG Verizon drivers (v2.22 is the latest I've seen) installed, reboot, then put your tablet in Download mode, plug it into the PC and wait up to 10 minutes for it to load the drivers you installed.
Then try the official LG Flash Tool. I don't have links handy and I don't have the X8.3, but those instructions should be good for any new LG device.
Good luck!
P.S. I've found out the hard way that especially certain Google Apps can't be reintegrated on a Stock ROM. Google Play Services and the Play Store are definitely no no on every Android device I've tried. The rest may be okay, YMMV.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 35A_08 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 35A_08 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
Thanks for the further suggestion, I'll give it a shot.
S.82 said:
Thanks for the further suggestion, I'll give it a shot.
Click to expand...
Click to collapse
Just a little typo I had to correct in my post. I had typed "v2.2" of the drivers. Actually the latest I've seen is v2.22, and this could potentially be critical since v2.22 came out around the time that the X8.3 did. I always go straight to the manufacturer's website for drivers so I always get the right thing.
Thanks for all the suggestions, so far there's nothing working but at least I've tried. Currently the LG tool just tells me I already have the latest firmware and won't do anything from there. I'm pretty sure i'll just have to wait until someone releases either the stock firmware on a site that I can access (it's on a Chinese site, but I don't want to spam their forum (in a different language, no less), just to be able to download the file), or releases a custom recovery, or a custom ROM. Any of those should make it an easy fix, or also if LG ever releases an update for the device that should make it so I can fix it.
I'm not in a huge hurry anyway, I've never been a big Android user (I've owned about 12 Androids, so I don't mean for it to sound as though I don't like the OS, it's a fun OS to play with), I just wanted to be able to play all the games that I own on Android from the Humble Bundles and other purchases I've done over the years, but 90% (at least, and I'm not kidding) of them wouldn't run on the tablet with the stock ROM anyway. They just crashed when opening, no idea why, I think it's because of the switch to 64-bit but that's just a guess.
Thanks again for all the suggestions though, I greatly appreciate them.
Sure, you're welcome! I was thinking that there was a menu near the upper right corner of the official LG flash tool that when you clicked on it, it had a "Update Recovery" option. I thought that option forced it to do a fresh flash of the stock ROM, once it downloaded it, but if it didn't then it's just because I only used that tool once or twice and it was last year.
Two sites I used to use, on which you could enter the IMEI of your LG device and it would give you a direct from LG download link for the latest KDZ, don't work any more.
This one still does, however. Maybe they're using their own servers or they have the up to date links from LG or something:
http://devtester.ro/projects/lg-firmwares/download.php
Then you could use (the unofficial) LG Flash Tool 2014 (not the one you tried before) to flash this KDZ to your VK815 with it in Download mode.
This is another interesting tool to download the latest KDZ. It works for my VK810, but similar to that link I put in my last post, I don't know if it uses it's own databases so I don't know if it'll have your VK815 KDZ:
http://runamux.net/search/view/zip/ObaB6da3ba/lg_imei_checker_2014_b1.html
Try using the method that was used to obtain root through a USB com port. That provides su access and should be able to push files just like the root files.
I thought about that, but I really don't know what all one-click root does to gain root access and be able to push files.
How did you root the VK815 version
jwimes2 said:
How did you root the VK815 version
Click to expand...
Click to collapse
+1 on this. How did you root the VK815? On latest software.
Hi Guys,
so this morning my SW3 told me there was a system update, cool, so i said yes to the update and let it do its thing.
on coming back, the os version was still the same (LDZ22D) which i thought was odd.
I then did a search and found that there was indeed a new version out (LCA43) and thought something sus was afoot.
I got the twrp from this post http://forum.xda-developers.com/smartwatch-3/development/lwx49k-rooting-easy-t3107501 and booted from twrp
i then pushed the rom i downloaded form here http://www.xperiablog.net/2015/08/2...-update-lca43-intros-interactive-watch-faces/ and promptly tried to flash it like i would any custom rom i would normally flash on any of my other android devices.
I got an error, saying it was expecting "test keys" from a LAZ22D device or a LWX49K device, and that I had LRX22G test keys.
I also tried an ADB sideload which also didn't work.
Am i doing something wrong? Has anyone else ever encountered this?
Full disclosure, I also installed supersu a few months ago, but have had many factory resets since then (new roms on the paired fone) which i wouldn't have thought was an issue?
Cheers for any help you can give
That update only works on stock recovery. Go to my rollback thread and install the complete system of 5.0.1. I put links and directions to all the files. Then roll forward.
Thanks for that @lekofraggle, but I found an easier option, install Sony companion software, reflash "latest" firmware (apparently LAZ22D) then sideload the original update zip. Worked just fine. Just to clarify, I never flashed twrp, just hot booted from it, wondering if root did break ota...
Sent from my Nexus 7 WIFI using Tapatalk
Yes, root breaks most otas, but adb sideload usually works. Glad it was simpler than my doomsday thoughts.
I was needing a new phone and saw a Linus Tech Tips video where he took an LG G3 and put LineageOS on it. So I thought I'd try it out for myself following his guidelines at https://linustechtips.com/main/topic/1058206-lg-g3-lineageos-tutorial/
I bought an LG G3 D851 (T-Mobile version) off EBay for this. It's my first Android phone (yes, experimenting on my first Android Phone), I've always used Windows phones. This is what I've done to the LG G3 so far:
I reverted back to KitKat. Everything seemed to have gone just fine.
Then I downloaded the the Full Purple Drake Root and ran that after I figured out that .gz files are a compressed file and that can be decompressed. Everything seemed to have worked fine.
Then I downloaded the TWRP app on the phone and tried to backup the recovery via the TWRP app, which I'm not sure if it worked correctly. But anyhow.
Now that I'm writing this I see I missed this step:
number seven: Select the TWRP file we copied over earlier in the app, flash it to recovery, and then reboot to recovery
Click to expand...
Click to collapse
I guess I just didn't understand what was meant by flashing it over and has just copied it to the phone's memory which I later wiped.
Well then I went into TWRP recovery and tried to do a recovery backup, which it seemed to do just fine. I rebooted and tried copying it over to the computer, which seems to not have worked. I just have an empty folder on my computer as we speak.
Then back in the TWRP recovery, I selected Wipe>Advanced Wipe, and select Dalvik, Cache, Data, Internal Storage, and System – then swipe to wipe.
Then I downloaded the latest version and nightly of LineageOS zip file and the Opengapps zip file but then had a hard time figuring how to get them to the phone.
I figured out that I could stick them on an SD card and slip it into the LG G3 that I'm working on and could see the files from the TWRP recovery menu.
So I tried to install the LIneageOS zip file several times and it didn't work. I'm guessing it's because I forgot to flash a certain file to TWRP recovery and am not sure how to do that, especially now with the phone only booting into recovery mode with the TWRP menu since it's wiped clean and will just display the LG logo and turn the LED different colors if I try to normal boot the phone.
Well I still want to try to fix the phone and go for LineageOS. I spent nearly all night working on it so I may give it a rest for a few days. But any help or pointers would be greatly appreciated.
Now that I think about it, I didn't do what I mentioned ok #4 above about flashing the TWRP recovery because TWRP recovery was installed with the full Purple Drake root. However, the Linus Tech Tips instructions point to them rooting the phone with the lite version of Purple Drake (root only) and then flashing the newest version of TWRP recovery. So I wonder if my problem has to do with my having the latest version of TWRP recovery on my phone.
Ok. So I think I'm making progress, although that's just a feeling I have since I'm not suite what I'm really doing.
Anyhow the error code was something like "Unknown Error, Error Executing Updater Binary in Zip, Zip is for LG G3 D851, this phone is...(blank)". So I found an article in DroidThunder.com talking about this very problem. It suggested unzipping the rom on my computer and looking for the updater-script file and erasing some lines that apparently only have to do with verification. Then re-zip and retry.
Now I'm getting a "No MD5 file" message followed by an "Error flashing zip" message.
Edit: After reading this I take it I have an older version of TWRP, that is, v2.7.1.0, whereas the newet versio (for this phone?) is apparently 3.3.1-0. That seems to have an effect on this. I wonder if it's possibly to flash a newer version of TWRP onto this bricked phone. Anyhow, I'll have to look into that later. It's time to call it a day.
So recently I've been focusing on these two threads:
[GUIDE] LG G3 D851 Unbrick Qualcomm 9008 Fully Working... Unbrickable D851! by Omar-Avelar
And:
[GUIDE][FIX][DISCUSSION] LG G3 Hard Brick Recovery by l33tlinuxh4x0r
But I can't get either of them to work. I guess the only other thing would be to try to find a ROM, preferably the original KitKat that came with the phone, and hope and pray that I can get TWRP recovery v2.7 to install it.
I have the original as a tot file. But as far as I understand, I need a zip file that's set up for TWRP recovery.
Anyhow, trying to get this phone running hasn't been easy and has made other problems. Now every time I turn on my Surface 3 I have to go through BitLocker authentication. Hopefully turning bcd Test Signing off will stop that. But I'm getting to the point that I'm feeling like giving up.
Well that's it. Last night I found a zip file for the original Marshmallow ROM for my G3. I got it onto the SD card, went into TWRP recovery, saw it install, restarted and...
Now it's hard bricked. I cannot even get into TWRP recovery. The screen won't show a thing. I tried several times to get it into any mode possible, normal boot, TWRP recovery boot, download mode, and that jumping the pins trick, and I can't get it to where I can do something with the phone.
So I'm giving up on all this rooting, custom recoveries and custom ROM stuff. It all seems like a good idea, and I'd love to be a part of it all. But I take it this isn't for me. So I give up.
Thanks to all who have worked on this and have made the helpful forums about these phones! Maybe if I were more competent I would have figured it out.
Well, I said I was giving up. But maybe not. I did give up trying to recover the phone from being bricked and sent it out to a JTAG shop. For about $40 the phone is supposedly fixed and on it's way back.
But when it's back, do I just leave it alone this time, or should I try to get Lineage OS back on it again? Well, this is something that I haven't made my mind up yet. I see where I had made several mistakes when I first tried to get LineageOS on it. Maybe I know enough now that it won't happen again. But at the same time there's no guarantee that I won't me it up again, and have to pay some $40 again to have it unbricked.
SUCCESS!!!
So I got my phone back with stock Marshmallow working. Then I carefully went through every step on the Linus Tech Tips site, including installing the latest version of TWRP, and the next thing I know I'm running LineageOS 16 on my phone!
This is great! It's my first Android Phone and I've got it setup just about perfect! The only thing I kind of miss is Wi-Fi calling. But that didn't work so well on the Alcatel Window's phones I had anyway. But I got all the apps and most of the music I need installed and am ready to go! I also have two batteries, and the original isn't too bad, so I might carry that around as a backup until I'm sure how much battery I'll be using.
I'll be coming back and thanking all the ones who's posts and work have helped me individually. But if you read this and are one of those who have worked on TWRP, LineageOS and anything else that has helped me, Thank You!