Develop Bugs

LG G3 is bricked, unable to turn on, and Code Error 43. NEED HELP ASAP!

So....... my LG G3 had a new OTA update for T-Mobile and I was an idiot to download and install the Update(YES I WAS REALLY DUMB TO DO THAT). So when my phone restarted, it automatically went to TWRP and I couldn't boot to system. I tried everything from hard reset to fiddling with the settings. When I attempted to turn on my phone, it wouldn't turn on even with charging the phone, using the buttons, and especially when I plug my phone into my computer. It gives me Code Error 43( Unrecognized USB Device) and now I'm in a hellhole attempting to fix this device by tomorrow. I need help ASAP before I lose my mind
P.S I'm rooted with Purple Drake and using ZoneROM

Can you boot into Download mode ? (Device turned down hold Vol Up then plug in to pc)

Nope. Can't even turn on the device and keeps on saying error 43. PLEASE SOMEONE HELP ME OUT OF THIS NIGHTMARE

xmagiicsx said:
Nope. Can't even turn on the device and keeps on saying error 43. PLEASE SOMEONE HELP ME OUT OF THIS NIGHTMARE
Click to expand...
Click to collapse
Try to plug it on another usb port. And when you try to boot into download mode nothing happens ?

Yep! For two hours straight and I have all the drivers downloaded. Drivers worked perfectly until it turned off.......
I hope it turns on before tomorrow. Keeping my head up until it is fixed

http://answers.microsoft.com/en-us/...cognised/6a2a5531-8b80-4798-9aa6-ee2dcb705c7f
and if that doesn't help try to uninstall that Unknown Device from your device tree in Device Manager and install the drivers again.

That didn't work either. I believe its my LG G3 because I was fiddling with the "SD Card Partition" and it had an System Fat32 error and it shut my phone off completely and now it won't turn on after that. Is there a way to reset or reverse my Partition settings?

Update: The phone is charging on my portable charger but won't turn on nor connecting via Windows 8.1

I found the problem. After doing some research, my phone is being half brick and im using Qualcomm HS-USB QDLoader 9008(COM3) but I don't know how to push files or how to use qhsusb_dload on the LG G3. PLEASE HELP ME

I found the problem. After doing some research, my phone is being half brick and I'm on Qualcomm HS-USB QDLoader 9008(COM3) port but I don't know how to push files or how to use qhsusb_dload on the LG G3. PLEASE HELP ME

I've never seen a device that doesn't boot into Download Mode.
So you're doing everything exactly like this man does and on 0:25 you can't see that Download Mode icon ?

Nope not working at all, either its trolling me or its officially dead. It just says im still ported into Qualcomm on my screen instead of download mode

Please help guys, I really need help before tomorrow. No boot, no screen,no download mode, no usb connected except for qualcomm hs-usb qdloader 9008 (com3) and can not use lgflashtool. Does this means its a hardbrick and I can't do anything to unbrick this device and I need to call T-Mobile for another phone or can the dev gods help me fix this phone problems soon. Please answer asap

U said, u fiddle with the sd card partition which I think shouldn't do... Best option is to take back for a replacement or repair my friend...

Thats the only option? I heard there is another way to reset it

I had the same problem .. I tried to update my phone with ota and the same happend to my phone .. I downloaded the latset stock software it was .kdz and i used lg tool and from control panel i changed the port to 41 and it did work

Akhayev said:
I had the same problem .. I tried to update my phone with ota and the same happend to my phone .. I downloaded the latset stock software it was .kdz and i used lg tool and from control panel i changed the port to 41 and it did work
Click to expand...
Click to collapse
Exactly how to change com port to 41
Sent from my LG-D855 using Tapatalk

newstar said:
Exactly how to change com port to 41
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
http://www.lg-phones.org/how-to-flash-unbrick-lg-g3-back-to-stock.html

Put the phone into download mode, go into device manager, ports(COM), you should see LGE then right click on properties, Port settings, advanced, then change COM port 41.then click ok and you should be fine.
Sent from my LG-LS980 using XDA Free mobile app

As I explained before I cant put on download mode nor turn it on
http://forum.xda-developers.com/showthread.php?t=2582142
It has to be similar to this but I dont think the LG G2 variant would work on this and forgot to mention the usb is called qhsusb_bulk

[Q] [H] LG D855 Bricked - No download mode / no recovery :crying:

When I boot my device no shows LG logo and does not come into download / recovery mode :crying:
any idea to fix it?

AnDyZ-BR said:
When I boot my device no shows LG logo and does not come into download / recovery mode :crying:
any idea to fix it?
Click to expand...
Click to collapse
What does it say when you plug it into the computer?
QHUSB_BULK?

I guess the better option is to try using LG flash tool to flash kdz, not sure if download mode will be booted since you mentioned download mode failed.
If none really work then should consider restoring stock rom using LG pc suite

Am I correct in saying the phone simply does not boot into download mode? You have have the phone off, hold + or - and plug USB in?

itsbighead said:
What does it say when you plug it into the computer?
QHUSB_BULK?
Click to expand...
Click to collapse
yes, say QHUSB_BULK
XPS_93 said:
I guess the better option is to try using LG flash tool to flash kdz, not sure if download mode will be booted since you mentioned download mode failed.
If none really work then should consider restoring stock rom using LG pc suite
Click to expand...
Click to collapse
does not work LG flash tool / LG PC suite" without the download mode!
drolgnir said:
Am I correct in saying the phone simply does not boot into download mode? You have have the phone off, hold + or - and plug USB in?
Click to expand...
Click to collapse
yes and yes =/

May I ask how did you brick it?

hey guys, I repaired using this method ....
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
i flash my rom using TWRP recovery
thank you xda users

asking for help
Hello!
I would like to ask you, that can you maybe help me with my LG G3 (D855) (16GB). I live in Europa, Hungary
I bought the device as used, and i would have liked to download the latest software via wifi, then on the phone restarted, and was only the TWRP on the phone, i restarted the device again, but i could entry only in the TWRP. I downloaded a ROM from the XDA, and i made a mistake, i installed the D851 software. The phone is bricked, no download mode. I tryed to unbrick, but every method need the download mode. If i put the device on the PC, the PC see only as modem. LGE AnroidNet USB modem, and the the port name LGE AnroidNet USB Serial Port Com4. If the battery is low, i see on the display, that show that need to charge, but nothing more life signal. If you can help me with some information and with files or via teamviewer, i will glad for you, and also donate. i think i have the correct TOT file, and the DLL file.
LGD855AT-00-V10k-234-30-VUK-SEP-03-2014-16G+0.tot
LGD855_20140526_LGFLASHv160.dll
I downloaded a program "BoardDiag3.99c.zip". but this program ask the BIN file, i found another program b2b.exe, that ask the TOT file at the extraction. Maybe that's is same?
As i wrote the PC sees my phone only as modem, and LGE AnroidNet USB Serial Port Com4. I dont know what is "Qualcomm HS-USB QDLoader 9008 mode", i dont see in the port menu. I hope that You, or someone can help me. i downloaded the QDLoader HS-USB Driver, but again show only the "LGE AnroidNet USB Serial Port Com4" (or now this is com41, i wanted to try a method, but need the download mode) Sorry for the bad english.
Have a nice day!

i have the same issue
AnDyZ-BR said:
hey guys, I repaired using this method ....
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
i flash my rom using TWRP recovery
thank you xda users
Click to expand...
Click to collapse
Please give a step by step tutorial since l cant seem to figure out how you solved the issue

LG G3 D855: Bricked After OTA Update

Please help with my bricked G3 (D855)
Hello!
i would like to ask you, that can you maybe help me with my LG G3 (D855). I live in Europa, Hungary
I bought the device as used, and i would have liked to download the latest software via wifi, then on the phone restarted, and was only the TWRP on the phone, i restarted the device again, but i could entry only in the TWRP. I downloaded a ROM from the XDA (G3 Cloudy), and i made a mistake, i installed the D851 software. The phone is bricked, no download mode. I tryed to unbrick, but every method need the download mode. If i put the device on the PC, the PC see only as modem. LGE AnroidNet USB modem, and the the port name LGE AnroidNet USB Serial Port Com4. If the battery is low, i see on the display, that show that need to charge, but nothing more life signal. If you can help me with some information or via teamviewer, i will very glad for you, and naturally also donate. As i wrote the PC sees my phone only as modem, and LGE AnroidNet USB Serial Port Com4. I downloaded the QDLoader HS-USB Driver_64bit for my PC, but i dont see Qualcomm HS-USB QDLoader 9008 between the ports.
I hope that someone can help me. Sorry for the bad english.
Have a nice day!

May be a dumb question since u don't have download mode, but can you enter recovery? If not you may be hard bricked as recovery and download are your only options and if neither work....

no, i dont have recovery mode

gogabor89 said:
no, i dont have recovery mode
Click to expand...
Click to collapse
No download and no recovery mode, seems ur hard bricked. Sorry to say, I May be wrong but I'm pretty sure. Flashing different models is detrimental.

Even though you installed the D851 version of Cloudy, you should still be able to enter TWRP. After a battery pull, you're holding down the power+volume down buttons until the LG logo appears, then releasing both and again pressing them until the Hard Reset menu displays? In the future, never take an OTA update if you have a third party recovery like TWRP or CWM installed.

I cant entry in the TWRP, no download mode, no recovery mode, nothing
can someone help me?

Give a read through this thread...
lg g3 d855 hard bricked no download mode or recovery!
http://forum.xda-developers.com/lg-g3/help/q-lg-g3-d855-hard-bricked-download-mode-t3090911
... and also through the posted links:
Unbrick - qhsusb_bulk (qualcomm 9006)
http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Unbrick lg g2 qhsusb_bulk(qualcomm 9006) export very partition(hdd)
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
... both methods of which can also be applied to the G3.

Thank You!
But for me maybe that is a bit hard :/ My english inst good too. And so i wrote, i dont have qhsusb_bulk(qualcomm 9006) between the ports if i connect my phone.
Can someone help me maybe via teamviewer? I would be very very glad

Help!lg g3 d855-bricked(when trying to enter download mode flashin startup screen)

Hello.
My LG G3 D855 Variant has been bricked.When trying to enter download mode startup screen Flashing and then to black screen.My PC is detecting my phone as Qualcomm HS-USB QDLoader 9008.Please help!:crying:

sachinvfrancis said:
Hello.
My LG G3 D855 Variant has been bricked.When trying to enter download mode startup screen Flashing and then to black screen.My PC is detecting my phone as Qualcomm HS-USB QDLoader 9008.Please help!:crying:
Click to expand...
Click to collapse
Hello,
Can you tell us what exactly you were trying to do? Also what firmware was your device running?
-Vatsal

Vatsal said:
Hello,
Can you tell us what exactly you were trying to do? Also what firmware was your device running?
-Vatsal
Click to expand...
Click to collapse
I'm Using LG G3 D855 European Variant

sachinvfrancis said:
I'm Using LG G3 D855 European Variant
Click to expand...
Click to collapse
Im in exactly the same position with exactly the same phone. Just got my phone back from LG repair and they said because it was rooted they wont repair it. Its stuck in boot loop and will only enter download mode for about 2 seconds before it enters boot loop again.
Computer only recognises it as Qualcomm HS-USB QDLoader 9008
Only message it gives is [330] boot verification fail - cause : MISMATCH_SIG_LEN
I was on CM13 and started to flash a new rom and it got stuck at 5%. After hours I disconnected the battery and this is what im left with.
Please help as every guide for Qualcomm HS-USB QDLoader 9008 is for different variants
Can anyone help??????
Matt

search for boarddiag 2.99 in g3 subforum, it will help you. Also see links in my signature. I do also have the tool somewhere on my androidfilehost. Also note that you need a tot file(it can be older, yes)

bender_007 said:
search for boarddiag 2.99 in g3 subforum, it will help you. Also see links in my signature. I do also have the tool somewhere on my androidfilehost. Also note that you need a tot file(it can be older, yes)
Click to expand...
Click to collapse
OK bit overwhelmed so much info on this subject but not found a guide I can follow yet. The only one I found has a password on the zip containing the tool. I've emailed the developer and will sit and wait.
Feel like I may not see my G3 again
Matt

matt1500 said:
OK bit overwhelmed so much info on this subject but not found a guide I can follow yet. The only one I found has a password on the zip containing the tool. I've emailed the developer and will sit and wait.
Feel like I may not see my G3 again
Matt
Click to expand...
Click to collapse
Hm, have you seen: this

bender_007 said:
Hm, have you seen: this
Click to expand...
Click to collapse
Wow nice find very good although zappin the motherboard looks well scary. Also after my device has been returned by LG it is not longer recognized by device manager as Qualcomm HS-USB QDLoader 9008 but rather as LGE AndroidNet USB Serial Port (COM 3)
Is this a significant change?
Has it made it easier or harder to fix?
Thanks guys for your help and input
Matt

You don't have to open it, you are already in 9008 mode
Sent from my LG-H815 using Tapatalk

bender_007 said:
You don't have to open it, you are already in 9008 mode
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Ok so I got it back to 9008 mode I follow the thread and after downloading the tot file I extract it using the said method in BoardDiag 2.99 and it just comes up Error-Max number of partition
Do you know what this means???
Matt

I am on the same page
Have you fixed the error message:
Max number if partition coming from Boarddiag ?

<HELP>wrong TOT(kdz) flashed, phone stuck in LG logo, no download/recovery

Hi ,
after fixing 9008 qualcom issue and getting to download mode i flashed the wrong TOT files and flash tool failed after "Laf memory size"
now i can't get back to download, can't get back to 9008 qualcom and all i can see is the LG logo and then the phone is dead, with no response at all,
can someone please assist, even getting me back to 9008 is great and i can take it from there...
hope you will help me!
Thanks

Here you go buddy.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085

can windows device menager see the device ?

Jahanzaibawan said:
Here you go buddy.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
Click to expand...
Click to collapse
Thanks,
but im looking for an option without HW issues, as i dont think i could be able to solder and shorten the board.
any other ideas?
when i plug the phone the computer pops a message with Unreconginzed connection