Related
Ok i just bought my Samsung Epic 4G (SPH-D710) I tried Rooting it but i do not think it worked. My wifi Does not work, The CWM is not there. And i do not know It just isn't what it needs to be haha. Now i rooted it for the i19100 i think, on accident. It said all versions but for some reaso i do not think this is right. So ultimately i am asking,
1. How do i root this the right way?
2. Does it come with CWM?
3. When i re-root it do i need to Un-root it this time first.
Sorry i am a newb when it comes to phones i am a computer guy lol
Thanks in advance
slimpickins said:
Ok i just bought my Samsung Epic 4G (SPH-D710) I tried Rooting it but i do not think it worked. My wifi Does not work, The CWM is not there. And i do not know It just isn't what it needs to be haha. Now i rooted it for the i19100 i think, on accident. It said all versions but for some reaso i do not think this is right. So ultimately i am asking,
1. How do i root this the right way?
2. Does it come with CWM?
3. When i re-root it do i need to Un-root it this time first.
Sorry i am a newb when it comes to phones i am a computer guy lol
Thanks in advance
Click to expand...
Click to collapse
What root method did you use?
1. Download Samsung Kies and install it on your computer.
Kies
2. Turn off your phone.
3. While the phone is off, hold down the Volume Up and Volume Down buttons at the same time and plug in your phone via USB cable after you have installed Kies in order to have it install the correct drivers for your device and the device should automatically boot into download mode.
4. Once the drivers are installed and your device can be recognized properly by your computer, make sure to CLOSE KIES completely. If it is running during the next steps, even in the background, it can cause issues.
5. Download Odin and open it.
Odin v1.8.5
6. Download the Recovery file for your specific device and save that to your computer.
T-Mobile Galaxy S II Recovery
Sprint Galaxy S II Recovery
AT&T Galaxy S II Recovery
Galaxy S II i9100 Recovery (Read the developer’s post to decide which file in the third post to download)
7. With the device plugged in and Odin open, click on the PDA button in Odin and select the Recovery file you just downloaded.
8. Select Start and this should flash the recovery to the device and reboot it.
III. Root the Device
1. Once the device reboots, mount the USB storage so we can transfer files to it.
2. Download the Superuser zip file and save it to your computer.
Superuser
3. Copy the Superuser .zip file to the root of your device’s sd card (Not in any folders, just on the sd card itself. Do NOT extract the file, leave it as a .zip)
4. Once it is copied to the device, unplug the device from the computer and turn it off.
5. Turn the device back on by holding down the volume down, volume up button, and the power button. Let go of the power button once the device vibrates but continue to hold the volume buttons until the recovery screen comes up.
6. Once the recovery screen comes up, use the volume buttons to scroll down to install zip from sd and then select the superuser .zip file we downloaded earlier.
7. Once it flashes, select go back, then reboot system now.
8. You should now see the superuser icon in your device’s app drawer. If so, you are all set!
I Used That method ( I wished I would have found XDA First) Thank you for your response
Also a couple things happened during this process, When he sais go into recovery mode, i do not have all those crazy choices i just have ur normal android recovery page..
down load mode
slimpickins said:
1. Download Samsung Kies and install it on your computer.
Kies
2. Turn off your phone.
3. While the phone is off, hold down the Volume Up and Volume Down buttons at the same time and plug in your phone via USB cable after you have installed Kies in order to have it install the correct drivers for your device and the device should automatically boot into download mode.
4. Once the drivers are installed and your device can be recognized properly by your computer, make sure to CLOSE KIES completely. If it is running during the next steps, even in the background, it can cause issues.
5. Download Odin and open it.
Odin v1.8.5
6. Download the Recovery file for your specific device and save that to your computer.
T-Mobile Galaxy S II Recovery
Sprint Galaxy S II Recovery
AT&T Galaxy S II Recovery
Galaxy S II i9100 Recovery (Read the developer’s post to decide which file in the third post to download)
7. With the device plugged in and Odin open, click on the PDA button in Odin and select the Recovery file you just downloaded.
8. Select Start and this should flash the recovery to the device and reboot it.
III. Root the Device
1. Once the device reboots, mount the USB storage so we can transfer files to it.
2. Download the Superuser zip file and save it to your computer.
Superuser
3. Copy the Superuser .zip file to the root of your device’s sd card (Not in any folders, just on the sd card itself. Do NOT extract the file, leave it as a .zip)
4. Once it is copied to the device, unplug the device from the computer and turn it off.
5. Turn the device back on by holding down the volume down, volume up button, and the power button. Let go of the power button once the device vibrates but continue to hold the volume buttons until the recovery screen comes up.
6. Once the recovery screen comes up, use the volume buttons to scroll down to install zip from sd and then select the superuser .zip file we downloaded earlier.
7. Once it flashes, select go back, then reboot system now.
8. You should now see the superuser icon in your device’s app drawer. If so, you are all set!
I Used That method ( I wished I would have found XDA First) Thank you for your response
Also a couple things happened during this process, When he sais go into recovery mode, i do not have all those crazy choices i just have ur normal android recovery page..
Click to expand...
Click to collapse
you only need vol down and power ... it will then ask you to press up for custom firmware
Volume Down And Power Takes me into download mode. Do you mean volume Up and power??
When i put The kernal (Wich i may have the wrong one) do i put on my sd card or phone sd
slimpickins said:
Volume Down And Power Takes me into download mode. Do you mean volume Up and power??
When i put The kernal (Wich i may have the wrong one) do i put on my sd card or phone sd
Click to expand...
Click to collapse
You need download mode for Odin to work. So vol down + power is correct. When using Odin it will only work if the phone is in download mode.
slimpickins said:
Ok i just bought my Samsung Epic 4G (SPH-D710) I tried Rooting it but i do not think it worked. My wifi Does not work, The CWM is not there. And i do not know It just isn't what it needs to be haha. Now i rooted it for the i19100 i think, on accident. It said all versions but for some reaso i do not think this is right. So ultimately i am asking,
1. How do i root this the right way?
2. Does it come with CWM?
3. When i re-root it do i need to Un-root it this time first.
Sorry i am a newb when it comes to phones i am a computer guy lol
Thanks in advance
Click to expand...
Click to collapse
Even though you are a noob you got to just slow down and read for hours and hours until you make a move. Now you also have to remember that stickies will usually have all the info you need. Especially in development.
Not sure where you are at with the phone right now but try this link and Good Luck
Thank you all i got it finally. Now i need to find a good ROM to install.... hmm any idea what is a good ROM to install?
slimpickins said:
1. Download Samsung Kies and install it on your computer.
Kies
2. Turn off your phone.
3. While the phone is off, hold down the Volume Up and Volume Down buttons at the same time and plug in your phone via USB cable after you have installed Kies in order to have it install the correct drivers for your device and the device should automatically boot into download mode.
4. Once the drivers are installed and your device can be recognized properly by your computer, make sure to CLOSE KIES completely. If it is running during the next steps, even in the background, it can cause issues.
5. Download Odin and open it.
Odin v1.8.5
6. Download the Recovery file for your specific device and save that to your computer.
T-Mobile Galaxy S II Recovery
Sprint Galaxy S II Recovery
AT&T Galaxy S II Recovery
Galaxy S II i9100 Recovery (Read the developer’s post to decide which file in the third post to download)
7. With the device plugged in and Odin open, click on the PDA button in Odin and select the Recovery file you just downloaded.
8. Select Start and this should flash the recovery to the device and reboot it.
III. Root the Device
1. Once the device reboots, mount the USB storage so we can transfer files to it.
2. Download the Superuser zip file and save it to your computer.
Superuser
3. Copy the Superuser .zip file to the root of your device’s sd card (Not in any folders, just on the sd card itself. Do NOT extract the file, leave it as a .zip)
4. Once it is copied to the device, unplug the device from the computer and turn it off.
5. Turn the device back on by holding down the volume down, volume up button, and the power button. Let go of the power button once the device vibrates but continue to hold the volume buttons until the recovery screen comes up.
6. Once the recovery screen comes up, use the volume buttons to scroll down to install zip from sd and then select the superuser .zip file we downloaded earlier.
7. Once it flashes, select go back, then reboot system now.
8. You should now see the superuser icon in your device’s app drawer. If so, you are all set!
I Used That method ( I wished I would have found XDA First) Thank you for your response
Also a couple things happened during this process, When he sais go into recovery mode, i do not have all those crazy choices i just have ur normal android recovery page..
Click to expand...
Click to collapse
Really, was all that necessary?
Easy way to root:
Download pre rooted odin tar, Here is pre rooted EL29 thread
Put yor phone in download mode, plug phone in, make sure there is a yellow box with com something in it, and click start.
Once phone reboots you are rooted! Go here and select the appropriate option. With EL29, you will select option C then the EL29 kernel with cwm. After reboot you will have root with cwm.
MUCH easier huh?
MikeC84 said:
Really, was all that necessary?
Easy way to root:
Download pre rooted odin tar, Here is pre rooted EL29 thread
Put yor phone in download mode, plug phone in, make sure there is a yellow box with com something in it, and click start.
Once phone reboots you are rooted! Go here and select the appropriate option. With EL29, you will select option C then the EL29 kernel with cwm. After reboot you will have root with cwm.
MUCH easier huh?
Click to expand...
Click to collapse
I got it already But thanks bud.
slimpickins said:
Thank you all i got it finally. Now i need to find a good ROM to install.... hmm any idea what is a good ROM to install?
Click to expand...
Click to collapse
Lots of great roms for this beauty of a phone, depends what you like though. I personally like the blazer rom which is themed like ICS but based off GB. Blend and TSM are good if you like a lot of customization. Look around and find one good for you, or you can flash to an ICS test build, but because your a noob still I don't recommend it until you're more experienced. I'm currently running BLEND ICS based off FB21 (ICS test build)
Thanks but even then I cant get to download off the site. I dont knowwhy. Both starburst and blazer I cant get tge site work for me
Sent from my SPH-D710 using XDA App
Try mirrors if you can't get the initial download to work, if it still doesn't work then disable your pop up blocker and possibly anti virus, and if that still doesn't work then perhaps your net speed is too slow. I've downloaded almost every rom on this forum without issue. Keep trying and good luck. Oh and because your a noob, stay away from the ICS leaks for now, until your very familiar with flashing, too many people are bricking good devices because they aren't reading enough.
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
eddyg519 said:
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
Click to expand...
Click to collapse
Sounds like the root method you are using is just way to complicated. Follow this one here http://forum.xda-developers.com/showthread.php?t=1739426 it has prerooted firmwares that you just install with odin and you are done (cwm included). Just make sure you grab the right firmware for your carrier.
If I have helped you out, slap that thanks button.
aeppacher said:
Sounds like the root method you are using is just way to complicated. Follow this one here http://forum.xda-developers.com/showthread.php?t=1739426 it has prerooted firmwares that you just install with odin and you are done (cwm included). Just make sure you grab the right firmware for your carrier.
If I have helped you out, slap that thanks button.
Click to expand...
Click to collapse
Beauty I think its flashing the rogers rom to my phone from there Im good to load other roms using this odin tool? (or is it rom manager?)
also what is this clockwork mod ? I might as well go into play store and get both rom manager and clockwork?
- eddy
So After I flashed the new rom to my phone i left it plugged in and it restarted. Android loader popped on and now it says android is upgrading... starting apps. Its been like this for over a half an hour... what do i do??? helpppp dont really want to reset it but it is bricked? or do i have to reload ?
update:
held the restart button down it restarted bit is still stuck on starting apps.
update two:
held vol down home and reset tried to reload the rogers rom onto the phone and now it stops at samsung load screen. Do i have to reload the carrier that came with the phone? I cant quite remember what the original carrier was.
UPDATE THREE:
I as able to boot back into the phone but...nothing changed? i ended up wiping the phones data in settings because its too full as it is. I downloaded root checker and it said access was denied ? That makes its not rooted after all... I followed the directions seems that they didnt take? Any clues?
eddy
eddyg519 said:
So After I flashed the new rom to my phone i left it plugged in and it restarted. Android loader popped on and now it says android is upgrading... starting apps. Its been like this for over a half an hour... what do i do??? helpppp dont really want to reset it but it is bricked? or do i have to reload ?
update:
held the restart button down it restarted bit is still stuck on starting apps.
update two:
held vol down home and reset tried to reload the rogers rom onto the phone and now it stops at samsung load screen. Do i have to reload the carrier that came with the phone? I cant quite remember what the original carrier was.
UPDATE THREE:
I as able to boot back into the phone but...nothing changed? i ended up wiping the phones data in settings because its too full as it is. I downloaded root checker and it said access was denied ? That makes its not rooted after all... I followed the directions seems that they didnt take? Any clues?
eddy
Click to expand...
Click to collapse
Okay buddy looks like you need to learn some basic android 101
You are definitely not ready to root or do anything til you learn this stuff...
Okay, so first is recoveries. Basically recoveries are a bit of software that let's you flash ROMs, kernels, and whatever else to your phone. When you hold volume up and power when your phone is off, you boot to recovery. Now basically recoveries are necessary because when you are flashing a new ROM it essentially deletes the android system from your phone first so this is a way of your phone still working between flashes.
Clockworkmod is a custom recovery with a lot of features meant for flashing ROMs. There are competitors such as TWRP (team win recovery project) but clockworkmod is a great starter. Use videos or tutorials on how to use it before you flash your first ROM. I can not stress how often you need to read read and read some more.
Okay so rooting your phone. Basically there is a "root" directory of your phone. Its where all the system files are stored and it let's you do a lot of stuff, but it also means you can screw a lot of stuff up to (like really screw it up). On default you are locked out of here by the maker of your phone for various reasons. Rooting means that someone found an exploit to gain access to this folder. Usually what you then do is you find a way to inject superuser (a little app that gives root access to other apps later on). You use Odin in this case to install a stock Samsung rom (with superuser already put in the root directory of that modified ROM its installing) essentially this means you have root. Root allows you to install recoveries like clockworkmod (which you need to flash ROMs later.
Okay so that was my quick run through. At your point you need to go to YouTube and Google how to root the sgs3 and hopefully they should have one for your specific carrier. The process should be the same minus the files you flash. Essentially you should be looking for stock ROM (for your specific device) with superuser or supersu already installed. Then you should be finding a way to install clockworkmod once you have root. (You may be able to find a file or tutorial that does this in one go). I cannot emphasise enough about reading. You wouldn't be here had you read first and in the flashing business, if you don't want a sgs3 paper weight you should read first.
Oh and ROMmanager from the marketplace installs clockworkmod for you (ONCE YOU HAVE ROOT) its simple. Just download it from the play story. Click flash recovery. It will load a bit and your done. Then you can reboot into it. ROM manager (the paid version is unnecessary) it just adds extra features you don't yet need. Look at it once you have flashed your first few ROMs.
Best of luck. Let me know and slap that thanks button. I wrote this on my phone.
READ READ READ
eddyg519 said:
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
Click to expand...
Click to collapse
Hi eddy,
It sounds like you didn't get CWM to stick after your flash with ODIN. You need to uncheck the reboot option in odin and then after the flash is done pull the battery and go directly into CWM loader by booting with the volume up + power + home button method. This will give you cwm rather than the stock loader you seem to be trying to use. You're almost there!
sxorpyon said:
Hi eddy,
It sounds like you didn't get CWM to stick after your flash with ODIN. You need to uncheck the reboot option in odin and then after the flash is done pull the battery and go directly into CWM loader by booting with the volume up + power + home button method. This will give you cwm rather than the stock loader you seem to be trying to use. You're almost there!
Click to expand...
Click to collapse
He also said root wasn't sticking. He needs that before he can cwm to stick
aeppacher said:
He also said root wasn't sticking. He needs that before he can cwm to stick
Click to expand...
Click to collapse
I think he can't install the superuser.zip from cwm after boot because he's allowing the stock rom to overwrite his cwm flash ... he's gotta pull his battery after the odin flash to get root in. That's what worked for me. once he's got root he can use rom manager to upgrade to cwm 6.x
sxorpyon said:
I think he can't install the superuser.zip from cwm after boot because he's allowing the stock rom to overwrite his cwm flash ... he's gotta pull his battery after the odin flash to get root in. That's what worked for me. once he's got root he can use rom manager to upgrade to cwm 6.x
Click to expand...
Click to collapse
He shouldn't need cwm to install. If flashes a firmware with root already injected he can then just use rom manager to install clockworkmod for the first time since rom manager just needs root which he will have. You can root and keep the stock recovery on at the same time
I think his biggest issue is root not sticking. Til he does that cwm wont install
After following these instructions. I still have a counter, still modified, and brick when I OTA.
I don't understand step four, so if anyone has the proper files and could walk me through just step 4, I think I will be golden.
I read and read, and not sure if TWRP is what I need for that, or something else? But, this is becoming a nightmare for this newb!
forum.xda-developers.com/showthread.php?t=2275844
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
You can also try this for going back to stock...
http://forum.xda-developers.com/showthread.php?p=40966346
But as far as step 4...
To gain root you'll need this.
http://forum.xda-developers.com/showthread.php?p=33854391
Then after it's rooted all you'll need to do. Is download goo manger, and install your custom recovery from there...
It will be TWRP that'll be installed btw...
SENT FROM MY SAMMY i317 USING TAPATALK4
Use 1click method works best
SENT FROM MY SAMMY NIZOTE 2 DN3 BEAST
Hello there. Some of you may know me from my work on other devices. I am Restl3ss. I have come across an SGH-S730M and was painfully disappointed with the support; namely that not only is there not one single custom rom (not even a stock ROM!) but all the root methods to date seem to involve some sort of third party hack-o-tron program instead of rooting the right way (a flashable zip and / or odin file). So, I've thrown together a flashable zip for the samsung galaxy discover SGH-S730M that will both root and overclock the device to 1 ghz. I've also decided to do a comprehensive guide for once, rather than throwing up the files with a figure-it-out type of stance. Without further ranting, here is my noob-friendly root guide for the SGH-S730M.
I am not responsible if anything goes wrong. I don't predict any problems but you never know. Use at your own risk.
Instructions:
Part one is to install a custom recovery. For this guide we will be using CWM. You will need three things to do that. The latest Samsung USB drivers, the CWM.tar.md5 file, and the flashing tool known as Odin. Get the Samsung drivers from here and install. Afterwards, download the Odin.zip from here and the CWM.tar.md5 from here. When the downloads are finished and you have the Samsung USB drivers installed, unzip Odin and run the .exe within.
Now, boot your phone into download mode. To do this, shut off your phone and plug it into your computer. Now hold the volume down, power, and home button simultaneously until the phone vibrates. Once it does, let go of ONLY THE POWER BUTTON. Your phone should now boot into download mode.
Now in odin, click the button that says PDA. a file selection prompt will appear. Locate the .tar.md5 file you downloaded earlier. Once you have, wait for odin to verify, and then click Start. Odin will now flash on a custom recovery, and your phone will reboot normally once the process is complete.
Part two is to flash the actual rooting zip. To do this, first download the zip found here. Then, copy it to your phones storage. once you have done this, shut off the phone. Restart the phone into recovery mode. To do this, (with the phone shut off) hold the power button and volume up button until the phone vibrates, then let go of ONLY THE POWER BUTTON. Your phone should boot into clockwork mod recovery. You can navigate this recovery by using the volume up and down buttons to move up and down in the menu, and the power button to make a selection. In clockworkmod recovery, select "install". Find the root zip you downloaded earlier and select it. Clockworkmod will ask you if you're sure you want to flash, select yes. After the flashing is finished, select reboot device. Your phone will boot up like normal and upon boot you will get an "android is upgrading" message. Wait for that to finish, and then use your phone as normal Congratulations, you are now rooted and overclocked.
Download links (once more, in case someone doesn't feel like peeling through the tutorial to find them)
Samsung USB drivers: drivers
Odin: odin
CWM: cwm
root.zip: root
just wondering if u ever came across a status 255 installation aborted error... i get that in step 2 when in CWM i select the zip for rooting
any ideas ?
I keep getting an error message when I try to flash my phone. It begins but then I get:
E:Error in /sdcard/root-sgh-s730m.zip
(status 255)
Installation aborted.
Any ideas?
After a update for better compatibility for 3rd party app, my Zenfone wont get past the ASUS screen at all.
Im also stuck at the asus load screen. I played around with the permissions of the sd card, after rebooting its stuck. Guys how to unbrick?
bratski said:
Im also stuck at the asus load screen. I played around with the permissions of the sd card, after rebooting its stuck. Guys how to unbrick?
Click to expand...
Click to collapse
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
jerk48 said:
After a update for better compatibility for 3rd party app, my Zenfone wont get past the ASUS screen at all.
Click to expand...
Click to collapse
by asus screen, did you mean the ASUS Setup Wizard?
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
my problem right now is my pc wont detect my phone. Ive already installed the drivers.
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
downshift00 said:
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
Click to expand...
Click to collapse
where do i get the stock image?
bratski said:
where do i get the stock image?
Click to expand...
Click to collapse
here is the stock firmware.
https://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
its fine if your phone does not talk to your PC now. copy the firmware to your SD card via other means. [card reader etc]
then try my method of flashing it back to original state, you stated that adb dont work, have you tried the temp CWM method yet?
the main goal is to wipe dalvik cache under advanced menu in CWM, and cache partition and all hard reset.
then you flash back your original file.
hope it works for you.
sooty84 said:
here is the stock firmware.
https://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
its fine if your phone does not talk to your PC now. copy the firmware to your SD card via other means. [card reader etc]
then try my method of flashing it back to original state, you stated that adb dont work, have you tried the temp CWM method yet?
the main goal is to wipe dalvik cache under advanced menu in CWM, and cache partition and all hard reset.
then you flash back your original file.
hope it works for you.
Click to expand...
Click to collapse
ive read about the temp cmw method and i cant figure out how to go about it. it says on the instruction that you need to turn on phone before running the cai_dat_CWM. how am i going to do this as my phone will only boot to the asus logo? thanks
just figured it out. I need to boot in fastboot so the phone will get recognized. However, the latest build available on the asus website is still 2.17.40.12. I already have the 2.18.40.12 version. The 2.17 firmware can't overwrite the newer build in temp CWM recovery. Anybody knows where i can download the full rom? Z00A-WW-2.18.40.12?
bratski said:
just figured it out. I need to boot in fastboot so the phone will get recognized. However, the latest build available on the asus website is still 2.17.40.12. I already have the 2.18.40.12 version. The 2.17 firmware can't overwrite the newer build in temp CWM recovery. Anybody knows where i can download the full rom? Z00A-WW-2.18.40.12?
Click to expand...
Click to collapse
I GOT THE SAME PROBLEM.
dunno what to do anymore.
sigh...
help me please
Ninjakura said:
I GOT THE SAME PROBLEM.
dunno what to do anymore.
sigh...
help me please
Click to expand...
Click to collapse
here is the link for stock but pre-rooted img for latest 2.18.40.12 firmware,,make sure to download Z00A firmware if you have ZE551ML device.. and if I was not mistaken, you may choose to FULL UNROOT in SuperSU apps to go back to stock rom..
cangcan said:
here is the link for stock but pre-rooted img for latest 2.18.40.12 firmware,,make sure to download Z00A firmware if you have ZE551ML device.. and if I was not mistaken, you may choose to FULL UNROOT in SuperSU apps to go back to stock rom..
Click to expand...
Click to collapse
thanks. problem solved after i followed instructions from this thread, http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
bratski said:
my problem right now is my pc wont detect my phone. Ive already installed the drivers.
Click to expand...
Click to collapse
me too, any idea on how to fix it?
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
I have same prolem as OP's got.
I've got stuck on Asus Loading screen after install OTA update on rooted device.
I'm gonna try your method.
Thanks
downshift00 said:
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
Click to expand...
Click to collapse
how did u do that? can u give me step by step instruction please?
ty
Did anyone able to fix this problem (stuck at Asus logo and not able to get to recovery mode or connect to the computer)? Thanks!
SAN_MARINO said:
Did anyone able to fix this problem (stuck at Asus logo and not able to get to recovery mode or connect to the computer)? Thanks!
Click to expand...
Click to collapse
Press Power+Volume Up key, After vibration leave Power Button then choose Recovery Mode using Volume keys, if sleeping Android screen appear at Recovery with Error message, Press Volume Up and Power and leave immediately Power Key, it will show you the Recovery Menu, then Reset your device, it will solve your problem.
If I am helped you, Press Thanks button.
k576 said:
Press Power+Volume Up key, After vibration leave Power Button then choose Recovery Mode using Volume keys, if sleeping Android screen appear at Recovery with Error message, Press Volume Up and Power and leave immediately Power Key, it will show you the Recovery Menu, then Reset your device, it will solve your problem.
If I am helped you, Press Thanks button.
Click to expand...
Click to collapse
Thanks!
I already tried it like 20 or more times. The ASUS logo still shown for like 10 seconds and died and came back again (ASUS logo). When I tried to connect it with my laptop, the computer won't recognize the device.
SAN_MARINO said:
Thanks!
I already tried it like 20 or more times. The ASUS logo still shown for like 10 seconds and died and came back again (ASUS logo). When I tried to connect it with my laptop, the computer won't recognize the device.
Click to expand...
Click to collapse
I will try to tell you step by step:
1. Press Power Button + Volume Button
You enter into Recovery Fastboot Option, then Choose Recovery menu using Volume Key (3 Option mostly shown)
then press Power Button (From Recovery Mode), it restart.
2. Then after Restart it shows you (Mostly) Sleeping Android Screen with Error text, then Press First Volume Up Button, and Press Power Button (Power button for a second or two then leave it, IF YOU PRESS MORE TIME, IT WILL RESTART THE PHONE).
3. You can now see the Recovery Menu with Normally appear in other phones also - Reset, Restart, Etc Option.
Hope you will now able to reset your phone...
----------------------------------------------------------
PRESS THANKS BUTTON IF I AM HELPED YOU
----------------------------------------------------------